- Users - libvirt List Archives

[libvirt-users] Changing dnsmasq DNS settings for virtual machines
by Johannes Kastl 14 Apr '14

14 Apr '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, maybe this is an old fart, but I cant get it to work. I am running libvirt on a laptop, where a dnsmasq is already running to delegate dns info for my local (not-public) network. My resolv.conf (on the host) lists the system-dnsmasq as first server. I had to set the listen-adress for the system-dnsmasq to 127.0.0.1 and set bind-interfaces, to stop if from binding to all interfaces and overriding the libvirtd-dnsmasq, which also has dhcp enabled. Now, how can I tell the libvirtd-dnsmasq, to use the system-dnsmasq as first nameserver? I found lots of pages when searching for "libvirt dns", but all of them only show the dhcp-part of the network's xml file: http://wiki.libvirt.org/page/VirtualNetworking#DNS_.26_DHCP > <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> <range > start="192.168.122.100" end="192.168.122.254" /> <host > mac="00:16:3e:e2:ed" name="foo.example.com" ip="192.168.122.10" /> > </dhcp> </ip> One possible workaround: My system-dnsmasq reads /etc/hosts_whatever, and apparently the libvirtd-dnsmasq reads var/lib/libvirt/dnsmasq/NETWORK_NAME.addnhosts. I could copy my hosts_whatever in that place, but I had to configure the libvirtd-dnsmasq what my local domains are. Which brings me to the next question: How to set the addn-hosts= for the libvirtd-dnsmasq in the xml file? Regards, Johannes - -- A good sermon should be like a woman's skirt: short enough to arouse interest but long enough to cover the essentials. (Ronald Knox) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAlNA5zMACgkQzi3gQ/xETbJBVACeLV9j/TDxgnImAsyEtotUBJ2J OD0An2WDBWUoqCUvmoquk4pwoKplfu/T =g6YM -----END PGP SIGNATURE-----

2 7

[libvirt-users] Is it possible to get the vm which is using a storage pool's volume?
by Pasquale Dir 14 Apr '14

14 Apr '14

Hello, how can I programmatically get the vm which is currently using a storage volume? I looked at the apis but I can't find anything about it. Pasquale

2 1

[libvirt-users] libvirt and glusterfs integrate problem
by lyz_pro 14 Apr '14

14 Apr '14

Hi everyone I have a problem when use libvirt and glusterfs. When I use libvirt to start a vm with glusterfs disk. the operation will block. after I `CTL + c` the 'virsh start domainxx' comand , I use `virsh list` will find the vm in a strange state, kind like follow: Id Name State ---------------------------------------------------- 20 vm10 shut off and I when I start the vm again, It will promote the vm is in active. the xml as follow (172.16.32.16 is a glusterfs node): <domain type='kvm' id='20'> <name>vm10</name> <uuid>12208c14-3990-c134-2653-8a828ff1eb1d</uuid> <memory unit='KiB'>1048576</memory> <currentMemory unit='KiB'>1048576</currentMemory> <vcpu placement='static'>4</vcpu> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='rhel6.5.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='network' device='disk'> <driver name='qemu' type='qcow2'/> <source protocol='gluster' name='h2216v5/tmp/vm10.img'> <host name='172.16.32.16'/> </source> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <alias name='usb0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <interface type='bridge'> <mac address='00:0c:29:2f:aa:b1'/> <source bridge='virbr0'/> <target dev='vnet91'/> <model type='rtl8139'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5991' autoport='yes' listen='172.16.32.3' keymap='en-us'> <listen type='address' address='172.16.32.3'/> </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='none'/> </domain> Also: I can use `qemu-kvm` command to start vm successful with gluster://172.16.32.16 I have stop both nodes' iptables. and my libvirt and qemu version is : Compiled against library: libvirt 1.1.4 Using library: libvirt 1.1.4 Using API: QEMU 1.1.4 Running hypervisor: QEMU 1.6.2 glusterfs-3.4.1-3.el6.x86_64 -------------- lyz_pro 2014-04-14

2 1

[libvirt-users] libvirt Java - vmware (esx driver)
by Mihai Cazacu 14 Apr '14

14 Apr '14

Hi, I'm trying to connect to a VMware vCenter Server (Version 5.0.0 Build 1300600) using this code: class CustomConnectAuth extends ConnectAuth { > CustomConnectAuth() { > // credType = ... // ... > } > @Override > int callback(Credential[] cred) { > // ... > return 0 > } > } > ConnectAuth auth = new CustomConnectAuth() > Connect conn = new Connect("esx://USERNAME@HOSTNAME/sdk?no_verify=1", > auth, 0) and I've got this error message: libvirt: error : unsupported configuration: *libvirt was built without the > 'esx' driver* If I use the vijava client, the connection works fine. ServiceInstance serviceInstance = new ServiceInstance(new URL(" > https://HOSTNAME/sdk"), USERNAME, PASSWORD, true) ... Some environment info: os: Ubuntu 13.10 > jdk: 1.7.0_51-b13 > Java client: org.libvirt:libvirt:0.5.1 Can you help, please? Thanks, Mihai -- Mihai Cazacu Software Engineer E-mail: cazacugmihai(a)gmail.com Mobile: +40 745 254 657 Linkedin: cazacugmihai <http://www.linkedin.com/in/cazacugmihai> Skype: cazacugmihai Twitter: cazacugmihai

1 1

[libvirt-users] Setting elevator=noop in the guest necessary?
by Johannes Kastl 13 Apr '14

13 Apr '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, I found an article about libvirt, and one thing that I have not seen anywhere else: > IMPORTANT: If you boot a Linux VM, you might want to add > “elevator=noop” to your Linux boot command line to force the disk > scheduler to let the host machine handle the disk writes > reorganisations (like tunnelling tcp over tcp, it is bad to have > two schedulers trying to do each other’s job). For example, on > GRUB2 on Debian, you have to append “elevator=noop” after > GRUB_CMDLINE_LINUX in /etc/default/grub. (from http://blog.normation.com/en/2012/03/09/a-guide-to-the-everyday-use-of-libv…) Is this necessary? Or is this even a good idea? Is this outdated? Or does it depend on the kind of hypervisor (XEN, KVM,...)? The few qemu/KVM-machines I have tested did work fine without this, although at this point I just set them up and did a few program installations, no real 'workload'. Thanks in advance. Regards, Johannes - -- ...Unix, MS-DOS, and Windows NT (also known as the Good, the Bad, and the Ugly). (Matt Welsh) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAlNK5UUACgkQzi3gQ/xETbK9jQCePXXY87HpDrufk8tKvaI+JhR9 uGQAoJjxU/B8Z8sGvQS/iPUZNsQtM/Il =sjGR -----END PGP SIGNATURE-----

1 0

[libvirt-users] libvirt: error : internal error: cannot apply process capabilities -1
by Santhosh Kokala 11 Apr '14

11 Apr '14

Hi All, I am running libvirt-1.1.2 on Scientific Linux release 6.1 (Carbon). I compiled the libvirtd rpms and installed them on to my system. I see this error 2014-04-11 05:37:42.351+0000: 12378: error : virCommandWait:2348 : internal error: Child process (LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/libexec/qemu-kvm -help) unexpected exit status 1: libvirt: error : internal error: cannot apply process capabilities -1 Whenever libvirtd restarts. Because of this error I also cannot create a domain with os_type set to "hvm". Virsh capabilities also does not list this os_type. Can someone let me if I am missing something obvious? Santhosh

2 1

[libvirt-users] Help with understanding and solving snapshot problem
by rolf 11 Apr '14

11 Apr '14

Hello Fairly new to libvirt. I’m hoping to both solve a problem with this question as well as learn more detail about how libvirt works. Using RHEL 6.4 and libvirt version is 0.10.2 and qemu-img version is 0.12.1.2 Using virt-manager I created a VM. Nothing unusual as far as I can see. I then added a disk. So I have a second virtio based volume which the guest then mounts as a separate filesystem. At some stage after that I created a snapshot of the system. I can’t delete the snapshot. The end result is I’d like to create a snapshot that excludes the second (much larger) disk - that is backed up via conventional backup systems. But the issue is first deleting the snapshot and my understanding of what its saying. So here is some basic info: # virsh snapshot-list host1 Name Creation Time State ------------------------------------------------------------ snap1-host1 2014-01-19 16:59:10 +1100 shutoff # # virsh snapshot-info host1 --current Name: snap1-host1 Domain: host1 Current: yes State: shutoff Location: internal Parent: - Children: 0 Descendants: 0 Metadata: yes So I try and delete it: # virsh snapshot-delete host1 --current error: Failed to delete snapshot snap1-host1 error: unsupported configuration: deletion of 1 external disk snapshots not supported yet Why does it say “external” in the above error, when the snapshot-info says its Location is internal? Are they not related ideas? The img file /var/lib/libvirt/images/host1.img is not being used by KVM. the snapshot files are in use instead: # virsh domblklist host1 Target Source ------------------------------------------------ vda /var/lib/libvirt/snap1-host1.qcow2 vdb /var/lib/libvirt/snap1-host1-db.qcow2 hdc - Querying them: # qemu-img info /var/lib/libvirt/snap1-host1.qcow2 image: /var/lib/libvirt/snap1-host1.qcow2 file format: qcow2 virtual size: 24G (25769803776 bytes) disk size: 3.5G cluster_size: 65536 [root@cocoa libvirt]# qemu-img info /var/lib/libvirt/snap1-host1-db.qcow2 image: /var/lib/libvirt/snap1-host1-db.qcow2 file format: qcow2 virtual size: 1.6T (1800279089664 bytes) disk size: 325G cluster_size: 65536 What have I done wrong and how can I correct this so I can discard the existing snapshot and have a snapshot of the system excluding the second disk (and optionally which I can re-take at intervals and discard old ones)? Many thanks, rolf.

2 4

[libvirt-users] Windows 2008r2 guest tcp retransmit hangs
by Dennis Jacobfeuerborn 10 Apr '14

10 Apr '14

Hi, I'm currently investigating a problem with our windows 2008r2 guest on centos 6 hosts. The issue is that the windows system sometimes sees a SYN packet for a tcp connection but doesn't respond. Three seconds later the retransmitted packet arrives and this time windows decides to proceed normally with the connection. This is with the virtio drivers but I have now switched to the e1000 driver where the problem also occurs but not quite as badly as with virtio which leads me to speculate that the driver isn't really the problem but only affects whatever the real issue is. Also this does not happen when the systems primary IP is addressed directly but only when an IP on the loopback device is addressed through a load-balancer. I've also provisioned a linux guest on the same host and put that into the load balancer as well but there everything is fine. Has anyone run into this and can provide a pointer in the right direction? Regards, Dennis

2 1

[libvirt-users] passthrough filesystem (9p) permissions issues on Fedora 20
by David Mansfield 10 Apr '14

10 Apr '14

Hello All: I've gotten a passthrough filesystem to work (as in, to mount) in my vm (guest F20, host F20), but due to the fact that the qemu-kvm process runs as "qemu" user, I cannot access "my" files from the share. Both the guest and the host are running SSSD so the user/group mapping is identical. Other than putting 'user = "root"' it /etc/libvirt/qemu.conf, is there a way to get this to work without trashing all of the file permissions on the directory? Even if I do put the user=root, I imagine selinux will become a major headache anyway. So is there a roadmap for how to get this working? -- Thanks, David Mansfield Cobite, INC.

1 0

[libvirt-users] disk iotune
by Doron Fediuck 10 Apr '14

10 Apr '14

Hi, reading the below[1] on blkdeviotune made me wonder if we can dynamically change the values after the VM is already running using iotune. Is it supported? Thanks, Doron [1] https://fedoraproject.org/wiki/QA:Testcase_Virtualization_IO_Throttling

2 2