Hi everyone I have a problem when use libvirt and glusterfs. When I use libvirt to start a vm with glusterfs disk. the operation will block. after I `CTL + c` the 'virsh start domainxx' comand , I use `virsh list` will find the vm in a strange state, kind like follow: Id Name State ---------------------------------------------------- 20 vm10 shut off and I when I start the vm again, It will promote the vm is in active. the xml as follow (172.16.32.16 is a glusterfs node): <domain type='kvm' id='20'> <name>vm10</name> <uuid>12208c14-3990-c134-2653-8a828ff1eb1d</uuid> <memory unit='KiB'>1048576</memory> <currentMemory unit='KiB'>1048576</currentMemory> <vcpu placement='static'>4</vcpu> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='rhel6.5.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='network' device='disk'> <driver name='qemu' type='qcow2'/> <source protocol='gluster' name='h2216v5/tmp/vm10.img'> <host name='172.16.32.16'/> </source> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <alias name='usb0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <interface type='bridge'> <mac address='00:0c:29:2f:aa:b1'/> <source bridge='virbr0'/> <target dev='vnet91'/> <model type='rtl8139'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5991' autoport='yes' listen='172.16.32.3' keymap='en-us'> <listen type='address' address='172.16.32.3'/> </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='none'/> </domain> Also: I can use `qemu-kvm` command to start vm successful with gluster://172.16.32.16 I have stop both nodes' iptables. and my libvirt and qemu version is : Compiled against library: libvirt 1.1.4 Using library: libvirt 1.1.4 Using API: QEMU 1.1.4 Running hypervisor: QEMU 1.6.2 glusterfs-3.4.1-3.el6.x86_64 -------------- lyz_pro 2014-04-14