[libvirt-users] ceph rbd pool and libvirt manageability (virt-install)
by Jelle de Jong
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello everybody,
I created a rbd pool and activated it, but I can't seem to create
volumes in it with virsh or virt-install?
# virsh pool-dumpxml myrbdpool
<pool type='rbd'>
<name>myrbdpool</name>
<uuid>2d786f7a-2df3-4d79-ae60-1535bcf1c6b5</uuid>
<capacity unit='bytes'>6997998301184</capacity>
<allocation unit='bytes'>10309227031</allocation>
<available unit='bytes'>6977204658176</available>
<source>
<host name='ceph01.powercraft.nl' port='6789'/>
<host name='ceph02.powercraft.nl' port='6789'/>
<host name='ceph03.powercraft.nl' port='6789'/>
<name>libvirt-pool</name>
<auth type='ceph' username='libvirt'>
<secret uuid='029a334e-ed57-4293-bb99-ffafa8867122'/>
</auth>
</source>
</pool>
# virt-install --version
1.0.1
# virsh --version
1.2.9
I ended using virsh edit ceph-test.powercraft.nl and making creating
the disk manually.
<disk type='network' device='disk'>
<auth username='libvirt'>
<secret type='ceph' uuid='029a334e-ed57-4293-bb99-ffafa8867122'/>
</auth>
<source protocol='rbd' name='libvirt-pool/kvm01-storage'>
<host name='ceph01.powercraft.nl' port='6789'/>
<host name='ceph02.powercraft.nl' port='6789'/>
<host name='ceph03.powercraft.nl' port='6789'/>
</source>
<target dev='vdc' bus='virtio'/>
</disk>
I use virt-install a lot to define, import and undefine domains, how
can I use virt-install to manage my rdb disks?
Kind regards,
Jelle de Jong
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iJwEAQECAAYFAlV1xlQACgkQ1WclBW9j5HkbPQP+PjNrzvlqysslOp2Yk7wH4Mxy
2sh2dn96G0KOAHEeEn3BN6IWlnD1TADZbHdpTtMwkdv48Xwn0sP1s+3QDM4pb3gP
n+z+dVxS8FouDIy/eiso3IBCj3g4TWbEX8ZHqs3jKqe0lZgAXBzB9xYSUowcEBrZ
ddkPbr8p8ozWyOG+9V8=
=lkK7
-----END PGP SIGNATURE-----
6 years, 2 months
[libvirt-users] virRandomBits - not very random
by Brian Rak
I just ran into an issue where I had about 30 guests get duplicate mac
addresses assigned. These were scattered across 30 different machines.
Some debugging revealed that:
1) All the host machines were restarted within a couple seconds of each
other
2) All the host machines had fairly similar libvirtd pids (within ~100
PIDs of each other)
3) Libvirt seeds the RNG using 'time(NULL) ^ getpid()'
This perfectly explains why I saw so many duplicate mac addresses.
Why is the RNG seed such a predictable value? Surely there has to be a
better source of a random seed then the timestamp and the pid?
The PID seems to me to be a very bad source of any randomness. I just
ran a test across 60 of our hosts. 43 of them shared their PID with at
least one other machine.
6 years, 5 months
[libvirt-users] stream finish throws exception via python API
by Shahar Havivi
Hi,
The following snippet works fine e.g. receiving the data but when calling
stream.finish() we get the following error:
stream = con.newStream()
vol.download(stream, 0, 0, 0)
buf = stream.recv(1024)
stream.finish()
libvirt: I/O Stream Utils error : internal error: I/O helper exited abnormally
Traceback (most recent call last):
File "./helpers/kvm2ovirt", line 149, in <module>
download_volume(vol, item[1], diskno, disksitems, pksize)
File "./helpers/kvm2ovirt", line 102, in download_volume
stream.finish()
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 5501, in finish
if ret == -1: raise libvirtError ('virStreamFinish() failed')
libvirt.libvirtError: internal error: I/O helper exited abnormally
Am I doing something wrong?
Thank you,
Shahar.
7 years, 11 months
[libvirt-users] systemctl libvirt-guests.service fails to start during host boot
by Benoit
Hi,
I have been using qemu and kvm for a while but I am newbie to libvirt.
(but I really like it :)
I am on Parabola (fork of Archlinux, using systemd)
I only got an issue regarding libvirt-guests service, when my host boots
about 7 times to 10 I got a issue on the service.
------------------------------------------------------------------------
systemctl status libvirt-guests.service
● libvirt-guests.service - Suspend Active Libvirt Guests
Loaded: loaded (/usr/lib/systemd/system/libvirt-guests.service;
enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Thu 2016-08-11 10:55:35
CEST; 36s ago
Docs: man:libvirtd(8)
http://libvirt.org
Process: 347 ExecStart=/usr/lib/libvirt/libvirt-guests.sh start
(code=exited, status=1/FAILURE)
Main PID: 347 (code=exited, status=1/FAILURE)
Aug 11 10:55:35 oms_apex_plaisir systemd[1]: Starting Suspend Active
Libvirt Guests...
Aug 11 10:55:35 oms_apex_plaisir libvirt-guests.sh[347]: Resuming guests
on default URI...
Aug 11 10:55:35 oms_apex_plaisir libvirt-guests.sh[347]: Resuming guest
: error: failed to connect to the hypervisor
Aug 11 10:55:35 oms_apex_plaisir libvirt-guests.sh[347]: error: no valid
connection
Aug 11 10:55:35 oms_apex_plaisir libvirt-guests.sh[347]: error: Failed
to connect socket to '/var/run/libvirt/libvirt-sock' no such file
Aug 11 10:55:35 oms_apex_plaisir systemd[1]: libvirt-guests.service:
Main process exited, code=exited, status=1/FAILURE
Aug 11 10:55:35 oms_apex_plaisir systemd[1]: Failed to start Suspend
Active Libvirt Guests.
Aug 11 10:55:35 oms_apex_plaisir systemd[1]: libvirt-guests.service:
Unit entered failed state.
Aug 11 10:55:35 oms_apex_plaisir systemd[1]: libvirt-guests.service:
Failed with result 'exit-code'.
------------------------------------------------------------------------
it is like the service starts too early.
When I restart the service everything is good and if I shutdown it sends
the ACPI message correctly to my guests.
I already seen lot of discussion but not able to find any working
solution.. any idea to help me figure out the issue ?
many thanks
belette
8 years, 1 month
[libvirt-users] Where to report Bug?
by Haitham El-Ghareeb
Hello,Today I got the following error message when I was trying to delete a Virtual Machine using "Virtual Machine Manager"
Error is pasted herelibvirt - Permission Denied - Pastebin.com
|
|
|
| | |
|
|
|
| |
libvirt - Permission Denied - Pastebin.com
| |
|
|
I know the error is in /usr/lib/python2.7/dist-packages/libvirt.py
I am not sure where to report the error. This error is a simple one that can be easily fixed.
Hope you can help me submit the error.
Apologies for any inconvenience.
~Haitham
8 years, 1 month
[libvirt-users] libvirt
by i.gerasimov@wsmgroup.ru
hi,
help me!) i broke my VM, changing configuration file fstab. Now it
not boot. How do I get working VM?) and can't connected console
--
С уважением,
Герасимов Иван Дмитриевич
WSM GROUP
8-909-793-01-51
ICQ 682218625
8 years, 1 month
[libvirt-users] ANNOUNCE: ruby-libvirt 0.7.0
by Chris Lalancette
I'm pleased to release ruby-libvirt 0.7.0. ruby-libvirt is a ruby wrapper
around the libvirt API. The changelog between 0.6.0 and 0.7.0 is:
* Fix network lease API to allow arguments that libvirt allows
* Implement VIRT_STORAGE_POOL_CREATE flags
* Implement more VIR_STORAGE_VOL flags
* Implement VIR_DOMAIN_QEMU_AGENT_COMMAND_SHUTDOWN
* Implement virDomainDefineXMLFlags
* Implement virDomainRename
* Implement virDomainSetUserPassword
* Implement VIR_DOMAIN_TIME_SYNC
* Fix the return value from virStreamSourceFunc so volume upload works
Version 0.7.0 is available from http://libvirt.org/ruby:
Tarball: http://libvirt.org/ruby/download/ruby-libvirt-0.7.0.tgz
Gem: http://libvirt.org/ruby/download/ruby-libvirt-0.7.0.gem
It is also available from rubygems.org; to get the latest version, run:
$ gem install ruby-libvirt
Packages for it are also built for Fedora, and will be released shortly.
As usual, if you run into questions, problems, or bugs, please feel free to
mail me (clalancette at gmail.com) and the libvirt mailing list.
Thanks to those who contributed to this release.
8 years, 1 month