- Users - libvirt List Archives

Re: [libvirt-users] Questions on how to reset ID numbers for virt Guests.
by Paolo Bonzini 12 Sep '13

12 Sep '13

Il 11/09/2013 00:27, James Sparenberg ha scritto: > I'm doing some experimenting in our Development lab and as a result > I'm kickstarting over and over Virtual guests. This is of course > causing the guest Id to increment by one with each test. I've > googled around and tried searching the list but have not found out > how (if at all) it would be possible to reset the ID number back to 1 > more than is in use. Also is there a limit where I run out of ID's? > (for example does it only go up to 99?) No, there is no limit. I don't know the answer to your other question, so I'm adding the libvirt-users mailing list. Paolo

4 3

[libvirt-users] libvirt-1.2.2-r1 (Gentoo) fails to start LXC containers
by Dennis Jenkins 11 Sep '13

11 Sep '13

I recently upgraded "libvirt" on Gentoo to 1.2.2-r1 (latest available). I have not used LXC containers for a few weeks, so I don't recall what version of libvirt I was using when my container last booted successfully. Unfortunately, Gentoo's portage tree does not offer any previous versions of libvirt that I could downgrade to. TL;DR: My container is configured to use "br0" for its networking. "br0" exists totally inside my linux server - it is NOT bound to any physical NIC. "br0" is used for most of my QEMU and LXC VMs. libvirt is reporting that it cannot find device "veth1". All of my Gentoo packages are up-to-date. Digging through my logs (/var/log/libvirt/libvirt.log), I see that I last successfully booted this LXC container on 2013-07-22, with libvirt reporting version "1.1.0". Thoughts? ostara lxc # equery l libvirt * Searching for libvirt ... [IP-] [ ] app-emulation/libvirt-1.1.2-r1:0 ostara lxc # uname -a Linux ostara 3.10.7-gentoo #2 SMP PREEMPT Sat Aug 24 16:03:57 CDT 2013 x86_64 Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz GenuineIntel GNU/Linux ostara ~ # emerge -pvuND world These are the packages that would be merged, in order: Calculating dependencies... done! Total: 0 packages, Size of downloads: 0 kB ostara lxc # virsh -c lxc:/// start dwj-hfax-dev error: Failed to start domain dwj-hfax-dev error: internal error: guest failed to start: PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_UUID=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_NAME=dwj-hfax-dev /sbin/init error receiving signal from container: Input/output error ostara ~ # tail /var/log/libvirt/lxc/dwj-hfax-dev.log 2013-09-10 13:56:22.767+0000: starting up PATH=/bin:/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/x86_64-pc-linux-gnu/i686-pc-mingw32/gcc-bin/4.7.3 LIBVIRT_DEBUG=3 LIBVIRT_LOG_OUTPUTS=3:file:/var/log/libvirt/libvirtd.log /usr/libexec/libvirt_lxc --name dwj-hfax-dev --console 20 --security=none --handshake 23 --background --veth veth1 PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_UUID=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_NAME=dwj-hfax-dev /sbin/init error receiving signal from container: Input/output error ostara ~ # tail /var/log/libvirt/libvirtd.log 2013-09-10 13:56:22.998+0000: 12948: info : libvirt version: 1.1.2 2013-09-10 13:56:22.998+0000: 12948: error : virLXCControllerRun:2186 : error receiving signal from container: Input/output error 2013-09-10 13:56:23.053+0000: 12948: error : virCommandWait:2348 : internal error: Child process (ip link del veth1) unexpected exit status 1: Cannot find device "veth1" 2013-09-10 13:56:23.097+0000: 10451: error : virNetSocketReadWire:1369 : Cannot recv data: Connection reset by peer 2013-09-10 13:56:23.153+0000: 10453: error : virLXCProcessStart:1234 : internal error: guest failed to start: PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_UUID=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_NAME=dwj-hfax-dev /sbin/init error receiving signal from container: Input/output error 2013-09-10 13:56:23.343+0000: 10453: error : virCommandWait:2348 : internal error: Child process (ip link del veth1) unexpected exit status 1: Cannot find device "veth1" (first occurrence of "veth1" in my libvirtd logs) ostara ~ # grep -a veth1 /var/log/libvirt/libvirtd.log | head -1 2013-09-10 13:51:55.333+0000: 9742: error : virCommandWait:2348 : internal error: Child process (ip link del veth1) unexpected exit status 1: Cannot find device "veth1" ostara ~ # which ip /bin/ip ostara ~ # equery b /bin/ip * Searching for /bin/ip ... sys-apps/iproute2-3.8.0 (/bin/ip) ostara ~ # ls -l /bin/ip -rwxr-xr-x 1 root root 282616 May 4 04:08 /bin/ip ostara ~ # ifconfig -a | grep "^[a-z]" br0: flags=4355<UP,BROADCAST,PROMISC,MULTICAST> mtu 1500 br1: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500 enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 enp5s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 enp6s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ostara ~ # virsh -c lxc:/// dumpxml dwj-hfax-dev <domain type='lxc'> <name>dwj-hfax-dev</name> <uuid>681410de-7b56-41bd-b38d-3c66ce97e7b3</uuid> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static'>4</vcpu> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64'>exe</type> <init>/sbin/init</init> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='/vm/lxc/dwj-hfax-dev'/> <target dir='/'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr/portage'/> <target dir='/usr/portage'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr/src'/> <target dir='/usr/src'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/home'/> <target dir='/home'/> </filesystem> <interface type='bridge'> <mac address='82:00:00:00:01:01'/> <source bridge='br0'/> </interface> <console type='pty'> <target type='lxc' port='0'/> </console> </devices> </domain>

4 5

[libvirt-users] Help needed in simulating libvirt
by Arun Viswanath 11 Sep '13

11 Sep '13

Hi All, I'm need to simulate libvirt API's say to mock the libvirt API responses. (Actually I need to simulate qemu API's response). Because of my project needs I need to write this simulated libvirt server in Java. I believe the simulated libvirt can be written as java RPC which should capable to receive the client RPC request calls and by dispatcher we can dispatch to the simulated java functions. I searched for .x file to be used for generating server stubs but unfortunately .x files like "remote_protocol.x", "virnetprotocol.x", "qemu_protocol.x" and "lxc_monitor_protocol.x" are not containing any procedure for libvirt API's that exposed. Please let me know which files will have these exposed procedures and how can I use it in java, Also I'm not sure how to implement the ssl layer support for the libvirt server in java. I need to write a java server in such a way that python client should capable to create a connection with uri "qemu+tls://systemip:port?no_tty=1". Also with the created connection object it should able to call the libvirt API's like getCapabilities, etc. Any help and ideas on this will be really helpful. Thanks in Advance, Arun V

3 6

Re: [libvirt-users] libvirt-1.1.2-r1 (Gentoo) fails to start LXC containers (subject line minor edit, was libvirt-1.2.2-r1)
by Dennis Jenkins 11 Sep '13

11 Sep '13

On Tue, Sep 10, 2013 at 1:34 PM, Doug Goldstein <cardoe(a)gentoo.org> wrote: > On Tue, Sep 10, 2013 at 9:09 AM, Dennis Jenkins > <dennis.jenkins.75(a)gmail.com> wrote: > > Yeah our security people got a bit over zealous. That's being rectified. > > :) > > > > TL;DR: My container is configured to use "br0" for its networking. "br0" > > exists totally inside my linux server - it is NOT bound to any physical > NIC. > > "br0" is used for most of my QEMU and LXC VMs. libvirt is reporting > that it > > cannot find device "veth1". All of my Gentoo packages are up-to-date. > > > > Digging through my logs (/var/log/libvirt/libvirt.log), I see that I last > > successfully booted this LXC container on 2013-07-22, with libvirt > reporting > > version "1.1.0". > > > > Thoughts? > > You really need to look at /var/log/libvirt/lxc/dwj-hfax-dev.log > > I did. I thought that I posted the relevant bits. I'll check/repost. It just lots of this (one set from each test that I did): 2013-09-10 13:56:22.767+0000: starting up PATH=/bin:/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/x86_64-pc-linux-gnu/i686-pc-mingw32/gcc-bin/4.7.3 LIBVIRT_DEBUG=3 LIBVIRT_LOG_OUTPUTS=3:file:/var/log/libvirt/libvirtd.log /usr/libexec/libvirt_lxc --name dwj-hfax-dev --console 20 --security=none --handshake 23 --background --veth veth1 PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_UUID=681410de-7b56-41bd-b38d-3c66ce97e7b3 LIBVIRT_LXC_NAME=dwj-hfax-dev /sbin/init error receiving signal from container: Input/output error I see the "--veth veth1", which is the same of the NIC that cannot be found. But that NIC is not listed in my domain config XML. > A suggestion would be to make sure that you have all the necessary > kernel options enabled. You can check with: ebuild > /usr/portage/app-emulation/libvirt/libvirt-1.1.2-r1.ebuild setup clean > > No errors. ostara ~ # ebuild /usr/portage/app-emulation/libvirt/libvirt-1.1.2-r1.ebuild setup clean * libvirt-1.1.2.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] * libvirt-1.1.2-e89bdf01.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums ;-) ... [ ok ] * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found kernel object directory: * /lib/modules/3.10.7-gentoo/build * Found sources for kernel version: * 3.10.7-gentoo * Checking for suitable kernel configuration options... [ ok ] 16 days ago, I updated from kernel 3.8.13 to 3.10.7. I could take a brief outage and down-grade my kernel if you think that is a worthy test. I just realized that when I composed my original email/bug report, that I misquoted the version of libvirt that I am running. I am indeed running "1.1.2-r1", but posted as "1.2.2-r1". ostara ~ # virsh version --daemon Compiled against library: libvirt 1.1.2 Using library: libvirt 1.1.2 Using API: QEMU 1.1.2 Running hypervisor: QEMU 1.5.2 Running against daemon: 1.1.2

1 2

[libvirt-users] how to setup network filter
by Jiaan Zeng 10 Sep '13

10 Sep '13

Hi All, I am new to libvirt and encounter a strange problem to set up network filter in a NAT network. I launched VMs in a single host using NAT, i.e. interface type='network'. Now I want to control the outbound traffic from VM instance - only allow the VM to asses a set of ip addresses. My network filter xml is as follows. The problem is once I change the VM xml, shutdown and start VM, VM cannot get ip address. /var/log/libvirt/libvirt.log shows " error : virNetDevGetIndex:656 : Unable to get index for interface vnet2: No such device" error. But when I remove the drop rule in the filter xml, VM can get IP address. I even tried the clean-traffic filter shipped with libvirt. VM throws the same error above. Any idea why this happens? How can I implement outbound traffic control in libvirt? Thanks a lot. <filter name='filter-test'> <rule action='accept' direction='in' priority='500'> <tcp dstportstart='22'/> </rule> <rule action='accept' direction='out' priority='500'> <ip dstipaddr='IP1'/> </rule> <rule action='accept' direction='out' priority='500'> <ip dstipaddr='IP2'/> </rule> <rule action='drop' direction='out' priority='500'> <all/> </rule> </filter> The VM network section XML looks like this <interface type='network'> <mac address='52:54:00:0d:f1:ce'/> <source network='default'/> <filterref filter='filter-test'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> -- Regards, Jiaan

2 1

[libvirt-users] Problems with user namespaces
by Jaka Hudoklin 10 Sep '13

10 Sep '13

Hello! I'm testing user namespaces and I have quite some problem getting them to work. First of all, I have user namespaces support enabled in kernel: offlinehacker:~/ $ uname -r 3.10.10 offlinehacker:~/ $ ls /proc/self/ns/ ipc@ mnt@ net@ pid@ user@ uts@ I created simple ubuntu rootfs and when I start container without idmap, so without user namespace mappings, it works just fine: Libivrt config: <domain type='lxc'> <name>helloworld</name> <memory>102400</memory> <os> <type>exe</type> <init>/bin/dash</init> </os>  <devices> <console type='pty'/> <filesystem type='mount'> <source dir='/home/offlinehacker/rootfs'/> <target dir='/'/> </filesystem> </devices> </domain> This is how my rootfs looks like: offlinehacker:~/ $ ls -la rootfs drwxr-xr-x 23 offlinehacker users 4096 sep 5 19:06 ./ drwxr-xr-x 59 offlinehacker users 4096 sep 5 19:06 ../ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:11 bin/ drwxr-xr-x 3 offlinehacker users 4096 avg 27 14:11 boot/ drwxr-xr-x 4 offlinehacker users 4096 avg 27 14:11 dev/ drwxr-xr-x 86 offlinehacker users 4096 sep 5 18:20 etc/ drwxr-xr-x 3 offlinehacker users 4096 avg 27 14:11 home/ lrwxrwxrwx 1 offlinehacker users 33 avg 27 14:10 initrd.img -> /boot/initrd.img-3.2.0-52-virtual drwxr-xr-x 18 offlinehacker users 4096 avg 27 14:10 lib/ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:10 lib64/ drwx------ 2 offlinehacker users 4096 avg 27 14:11 lost+found/ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:09 media/ drwxr-xr-x 2 offlinehacker users 4096 apr 19 2012 mnt/ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:09 opt/ -rw-r--r-- 1 offlinehacker vboxusers 231671365 avg 27 14:12 precise-server-cloudimg-amd64-root.tar.gz drwxr-xr-x 2 offlinehacker users 4096 apr 19 2012 proc/ drwx------ 2 offlinehacker users 4096 sep 3 23:47 root/ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:11 run/ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:11 sbin/ drwxr-xr-x 2 offlinehacker users 4096 mar 5 2012 selinux/ drwxr-xr-x 2 offlinehacker users 4096 avg 27 14:09 srv/ drwxr-xr-x 2 offlinehacker users 4096 apr 14 2012 sys/ drwxrwxrwt 2 offlinehacker users 4096 sep 4 01:39 tmp/ drwxr-xr-x 10 offlinehacker users 4096 avg 27 14:09 usr/ drwxr-xr-x 12 offlinehacker users 4096 sep 5 18:10 var/ lrwxrwxrwx 1 offlinehacker users 29 avg 27 14:10 vmlinuz -> boot/vmlinuz-3.2.0-52-virtual And this is who I am: offlinehacker:~/ $ id uid=499(offlinehacker) gid=67(libvirtd) groups=100(users),1(wheel),57(networkmanager),67(libvirtd) When I create the container with idmap uncommented I get the following error: offlinehacker:~/ $ virsh -c lxc:/// create helloworld.xml error: Failed to create domain from helloworld.xml error: internal error: guest failed to start: 2013-09-05 19:08:57.781+0000: 19036: debug And these are the logs: sep 05 19:08:52 laptop libvirtd[1542]: server=0x7fc8a60ddd60 client=0x7fc8a60e68d0 msg=0x7fc8a60e9380 rerr=0x7fc89a32cd40 args=0x7fc88800b4a0 ret=0x7fc88800a1c0 sep 05 19:08:52 laptop libvirtd[1542]: priv=0x7fc8a60e91f0 conn=(nil) sep 05 19:08:52 laptop libvirtd[1542]: name=lxc:/// sep 05 19:08:57 laptop libvirtd[1542]: Cannot recv data: Connection reset by peer sep 05 19:08:58 laptop libvirtd[1542]: internal error: guest failed to start: 2013-09-05 19:08:57.781+0000: 19036: debug Looks like .oldroot, dev, proc and sys gets created with mapped permissions(499:100), but container fails to start. Any help or direction how to get this working would be appriciated, Thanks, Jaka Hudoklin!

2 7

[libvirt-users] LVM Thin Volumes & Storage Pools
by Jorge Fábregas 09 Sep '13

09 Sep '13

Hi, Is it possible to create a storage pool based on an LVM thin pool? I read a recent bugzilla but the problem there was that the storage-pool became unusable AFTER creating a thinpool which is a different case. Thanks, Jorge

2 5

[libvirt-users] How to insert vcpupin in guest xml file
by Peeyush Gupta 09 Sep '13

09 Sep '13

Hi all, I am trying to add vcpupin in the guest xml file. I am working with openstack and the code I have is python bound. I investigated through the code and found that the elemets in xml file are set in get_guest_config function. Now the thing is I am not able to set vcpupin element. I mean I tried guest.cputune_vcpupin but it's not working. Help me out, please! Thanks. ~Peeyush Gupta

3 2

[libvirt-users] Cannot create a volume
by Daniele 09 Sep '13

09 Sep '13

Hi all, I'm trying to create a new volume in a netfs pool. The pool works correctly and it is active. If I try to create the volume from the virt-manager GUI nothing happens. While if I use virsh this is the result. *virsh # pool-list * *Name State Autostart * *-----------------------------------------* *routers active yes * * * *virsh # vol-create-as routers namevol 2G* *error: Failed to create vol vr1* *error: cannot create path '/var/lib/libvirt/images/routers/namevol': Invalid argument* What am I missing? Thanks for your help! Daniele

2 2

[libvirt-users] Error Attaching Seventh VirtIO-SCSI Device to Guest
by McEvoy, James 09 Sep '13

09 Sep '13

I have run into a problem attempting to attach the seventh virtio-scsi device to a RHEL 6.4 Guest from a RHEL 6.4 host running libvirt version 0.10.2-18. I have a guest that is running RHEL6.4 where I can attach disks sda(boot), sdb, sdc, sdd, sde and sdf but when I try to attach sdg the virsh attach-disk command fails with the error: error: Failed to attach disk error: internal error Unable to determine model for scsi controller I logged Bug 996327 on this issue including an attached script to repro the bug but there has been no activity on that bug so far. This is the results when attaching virtio-scsi disks in a loop. Sdf is attached but sdg fails. virsh attach-disk --domain UEM004n1 --source /dev/GuestVols/UEM004-5 --target sdf --cache none --type disk --config --wwn 1fc7058865439717 --serial c7d11fc7058865439717 --shareable Disk attached successfully Vol UEM004-6 created virsh attach-disk --domain UEM004n1 --source /dev/GuestVols/UEM004-6 --target sdg --cache none --type disk --config --wwn 4d3ddb9d15b05e7e --serial 62fd4d3ddb9d15b05e7e --shareable error: Failed to attach disk error: internal error Unable to determine model for scsi controller The script to create and attach LVM volumes using virtio-scsi is available here: https://bugzilla.redhat.com/attachment.cgi?id=785925 Has anyone else run into this... I had the understanding that each virtio-controller could support 4K devices. --jim

2 3