June 2017 - Users - libvirt List Archives

[libvirt-users] ceph rbd pool and libvirt manageability (virt-install)
by Jelle de Jong 28 Aug '18

28 Aug '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I created a rbd pool and activated it, but I can't seem to create volumes in it with virsh or virt-install? # virsh pool-dumpxml myrbdpool <pool type='rbd'> <name>myrbdpool</name> <uuid>2d786f7a-2df3-4d79-ae60-1535bcf1c6b5</uuid> <capacity unit='bytes'>6997998301184</capacity> <allocation unit='bytes'>10309227031</allocation> <available unit='bytes'>6977204658176</available> <source> <host name='ceph01.powercraft.nl' port='6789'/> <host name='ceph02.powercraft.nl' port='6789'/> <host name='ceph03.powercraft.nl' port='6789'/> <name>libvirt-pool</name> <auth type='ceph' username='libvirt'> <secret uuid='029a334e-ed57-4293-bb99-ffafa8867122'/> </auth> </source> </pool> # virt-install --version 1.0.1 # virsh --version 1.2.9 I ended using virsh edit ceph-test.powercraft.nl and making creating the disk manually. <disk type='network' device='disk'> <auth username='libvirt'> <secret type='ceph' uuid='029a334e-ed57-4293-bb99-ffafa8867122'/> </auth> <source protocol='rbd' name='libvirt-pool/kvm01-storage'> <host name='ceph01.powercraft.nl' port='6789'/> <host name='ceph02.powercraft.nl' port='6789'/> <host name='ceph03.powercraft.nl' port='6789'/> </source> <target dev='vdc' bus='virtio'/> </disk> I use virt-install a lot to define, import and undefine domains, how can I use virt-install to manage my rdb disks? Kind regards, Jelle de Jong -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iJwEAQECAAYFAlV1xlQACgkQ1WclBW9j5HkbPQP+PjNrzvlqysslOp2Yk7wH4Mxy 2sh2dn96G0KOAHEeEn3BN6IWlnD1TADZbHdpTtMwkdv48Xwn0sP1s+3QDM4pb3gP n+z+dVxS8FouDIy/eiso3IBCj3g4TWbEX8ZHqs3jKqe0lZgAXBzB9xYSUowcEBrZ ddkPbr8p8ozWyOG+9V8= =lkK7 -----END PGP SIGNATURE-----

2 3

[libvirt-users] virRandomBits - not very random
by Brian Rak 01 Jun '18

01 Jun '18

I just ran into an issue where I had about 30 guests get duplicate mac addresses assigned. These were scattered across 30 different machines. Some debugging revealed that: 1) All the host machines were restarted within a couple seconds of each other 2) All the host machines had fairly similar libvirtd pids (within ~100 PIDs of each other) 3) Libvirt seeds the RNG using 'time(NULL) ^ getpid()' This perfectly explains why I saw so many duplicate mac addresses. Why is the RNG seed such a predictable value? Surely there has to be a better source of a random seed then the timestamp and the pid? The PID seems to me to be a very bad source of any randomness. I just ran a test across 60 of our hosts. 43 of them shared their PID with at least one other machine.

7 13

[libvirt-users] Way to detect virtual machine cpu features
by Lei Zhang 19 Jul '17

19 Jul '17

Hello everyone I want to know how can I use libvirt to detect what cpu features a virtual machine will see. I guess I could do it in following way: 1. if cpu mode is 'custom', use 'virsh cpu-baseline --features' on the cpu model to get model features. 2. if cpu mode is 'host-passthrough' or 'host-model', do a 'virsh capabilities' to list cpu features of physical host, they are identical to features of virtual machine. Is this right way to do things? Look forward to your valuable comments. Best regards, Lei

2 2

[libvirt-users] Ubuntu 16.04 libvirt-guests.sh [6917] - running guests under URI address default: no running guests
by Jędrek Domański 11 Jul '17

11 Jul '17

Hi I have recently upgraded from Ubuntu 15.04 to 16.04 and now everytime I shutdown my PC I get a black screen where it says "libvirt-guests.sh [6917] - running guests under URI address default: no running guests" and the PC just hangs forever and will not shutdown. I need to manually kill it in order to shut it down which is a pain in the ass. I have done some investigation and here is what I've found out so far. I have uninstalled libvirt, kvm and qemu: sudo apt-get purge libvirt* kvm qemu* The problem has gone, however I noticed some error messages at boot saying something that "FAILED Qemu .... It flashes so quickly and I am not able to read what exactly it says. I installed libvirt again: sudo apt install qemu-kvm libvirt-bin and the problem is back! So is this script trying to shutdown my virtual machines? It looks like it does but since it does not find any it hangs? I don't have any machines, though. I used to have one, but I removed it. What is interesting, my PC hangs at shutdown randomly, that is sometimes it hangs for like 15 seconds and it shutsdown but in most cases it hangs forever. So this happens randomly. So, this investigation has brought me to you guys so please help me. I have attached a screen (sorry for polish error message but the translation is in the email title). I have also posted a thread on AskUbuntu on this: https://askubuntu.com/questions/925696/ubuntu-16-04- libvirt-guests-sh-6917-running-guests-under-uri-address-default Thank you, Jędrzej

3 22

[libvirt-users] virtual drive performance
by Dominik Psenner 07 Jul '17

07 Jul '17

Hi, I'm investigating a performance issue on a virtualized windows server host that is run on a ubuntu machine via libvirt/qemu. While the host can easily read/write on the raid drive with 100Mmb/s as observable with dd, the virtualized windows server running on that host is barely able to read/write with at most 8Mb/s and averages around 1.4Mb/s. This has grown to the extent that the virtualized host is often unresponsive and even unable to start up its services with system default timeouts. Any help to improve the situation is greatly appreciated. This is the configuration of the virtualized host: ~$ virsh dumpxml windows-server-2016-x64 <domain type='kvm' id='1'> <name>windows-server-2016-x64</name> <uuid>XXX</uuid> <memory unit='KiB'>2097152</memory> <currentMemory unit='KiB'>2097152</currentMemory> <vcpu placement='static'>2</vcpu> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-xenial'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> </hyperv> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>IvyBridge</model> <topology sockets='1' cores='2' threads='1'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> <timer name='hypervclock' present='yes'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <pm> <suspend-to-mem enabled='no'/> <suspend-to-disk enabled='no'/> </pm> <devices> <emulator>/usr/bin/kvm-spice</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none'/> <source file='/var/data/virtuals/machines/windows-server-2016-x64/image.qcow2'/> <backingStore/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/var/data/virtuals/machines/windows-server-2016-x64/dvd.iso'/> <backingStore/> <target dev='hdb' bus='ide'/> <readonly/> <alias name='ide0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='ide' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:0e:f2:23'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='rtl8139'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='tablet' bus='usb'> <alias name='input0'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'> <listen type='address' address='127.0.0.1'/> </graphics> <video> <model type='vga' vram='16384' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='apparmor' relabel='yes'> <label>libvirt-XXX</label> <imagelabel>libvirt-XXX</imagelabel> </seclabel> </domain> Cheers, Dominik

6 17

[libvirt-users] Question about disabling '3dnowprefetch' CPU feature in Xen Guest using libvirt
by Charles Shih 05 Jul '17

05 Jul '17

Dear All, I'm reaching this mail-list to ask a small question about disabling '3dnowprefetch' CPU feature in Xen Guest using libvirt. This is my environment: Fedora release 26 (Twenty Six) 4.11.0-0.rc3.git0.2.fc26.x86_64 xen-4.8.1-2.fc26.x86_64 libvirt-3.2.1-1.fc26.x86_64 I can disable '3dnowprefetch' CPU feature in guest via 'xl' command, with adding `cpuid='host,3dnowprefetch=0'` into the CFG file. However, follow the instruction (https://libvirt.org/ formatdomain.html#elementsCPU), I added the following block into my XML file: ``` <cpu mode='host-passthrough' check='none'> <feature policy='disable' name='3dnowprefetch'/> </cpu> ``` Created the instance, seemed this feature was not being disabled in my guest. (I was able to see '3dnowprefetch' in `lscpu` outputs) Anybody has idea on this? Does libvirt support this for Xen? Any help would be appreciated. Thank you in advance. Regards, Charles Charles Shih (史晨) Quality Engineer Red Hat, Platform QE, Virt QE, Section 1 Email: cheshi(a)redhat.com IRC: cheshi @ #eng-china, #hyperv ,#qa, #virt T: +86 10 65627484 <010%206562%207484> - IP: 8387484 M: +86 18611268098 <186%201126%208098>

2 2

Re: [libvirt-users] recovering from deleted snapshot
by Doug Hughes 30 Jun '17

30 Jun '17

On Jun 30, 2017 6:22 AM, "Peter Krempa" <pkrempa(a)redhat.com> wrote: > > On Fri, Jun 30, 2017 at 12:05:47 +0200, Peter Krempa wrote: > > On Thu, Jun 22, 2017 at 11:02:41 -0400, Doug Hughes wrote: > > > > [...] > > > > > virsh blockcommit $vm $DISK --active --pivot > > > > > > Normally this works fine, though something went wrong on the 20th. > > > something happened to make the blockcommit fail, but the -snap file got > > > deleted (note to self - check return code from blockcommit command!) > > > > > > So now I'm in a state. The domain i still running. but it's running off > > > the -snapshot that is in the xml. I googled around for how to recover a > > > blockcommit from a deleted snapshot, but didn't find anything. (pointers > > > welcome) > > In fact, it's way simpler. If libvirt still knows about the overlay > image (this is necessary only so that it can say the proper things to > qemu) you can re-do the block commit: > > $ virsh list > Id Name State > ---------------------------------------------------- > 3 fedora23 running > > $ virsh snapshot-create-as --disk-only --no-metadata fedora23 > Domain snapshot 1498817916 created > $ virsh domblklist fedora23 > Target Source > ------------------------------------------------ > vda /var/lib/libvirt/images/fedora23.1498817916 > hda - > > $ rm /var/lib/libvirt/images/fedora23.1498817916 > $ ls /var/lib/libvirt/images/fedora23.1498817916 > ls: cannot access '/var/lib/libvirt/images/fedora23.1498817916': No such file or directory > $ virsh blockcommit --active --pivot fedora23 vda > > Successfully pivoted > $ virsh domblklist fedora23 > Target Source > ------------------------------------------------ > vda /var/lib/libvirt/images/fedora23.qcow2 > hda - > Thanks for the reply! The original image is still there. Only the 1st and only top-level snapshot is deleted. the blockcommit fails though: [root@vm1 ~]# virsh blockcommit serv1r2 vda --active --pivot error: block copy still active: disk 'vda' already in active block job

3 4

[libvirt-users] recovering from deleted snapshot
by Doug Hughes 30 Jun '17

30 Jun '17

I have an automatic process setup. It's still pretty new and obviously in need of better error handling because now I find myself in a bad state. I run snapshot-create-as across all my vms, then do zfs replication to the target backup system, then blockcommit everything. virsh snapshot-create-as --domain $vm snap --diskspec $DISK,file=$VMPREFIX/"$vm"-snap.qcow2 --disk-only --atomic --no-metadata --quiesce ... virsh blockcommit $vm $DISK --active --pivot Normally this works fine, though something went wrong on the 20th. something happened to make the blockcommit fail, but the -snap file got deleted (note to self - check return code from blockcommit command!) So now I'm in a state. The domain i still running. but it's running off the -snapshot that is in the xml. I googled around for how to recover a blockcommit from a deleted snapshot, but didn't find anything. (pointers welcome) [root@vm1 images]# virsh domblklist serv1r2 Target Source ------------------------------------------------ vda /var/lib/libvirt/images/serv1r2-snap.qcow2 fda - hdb /var/lib/libvirt/images/virtio-win-0.1.126.iso I can see the size increasing on the deleted file in lsof: qemu-kvm 48994 49033 qemu 97u REG 0,44 1855913984 1078 /var/lib/libvirt/images/serv1r2-snap.qcow2 (deleted) ... qemu-kvm 48994 49033 qemu 97u REG 0,44 1856110592 1078 /var/lib/libvirt/images/serv1r2-snap.qcow2 (deleted) -- so, do I need to rollback the zfs snapshot image or is there some other way to recover from this snafu? Thanks.

2 2

[libvirt-users] Problems creating a new volume
by Pablo Vieytes 27 Jun '17

27 Jun '17

Hi, I'm having troubles creating a new storage volume in c++. This is my code: storageVolXml = "<volume>\ <name>" + name +".img</name>\ <allocation>0</allocation>\ <capacity unit=\"G\">" + hd + "</capacity>\ <target>\ <path>" + filePath + "</path>\ <format type='"+ diskFormatType + "'/>\ </target>\ </volume>"; storageVolPtr = virStorageVolCreateXML(pool, storageVolXml.toLatin1().data(), VIR_STORAGE_VOL_CREATE_PREALLOC_METADATA); I don't have any error but no file is created in the specified path (filePath). Any suggestion? Thanks in advance.

1 0

[libvirt-users] Accepting RELATED, ESTABLISHED (TCP) connections into VM using Network Filters
by Wido den Hollander 26 Jun '17

26 Jun '17

Hi, Over the past few days I've been trying to get a prototype working of a stateful firewall for a Virtual Machine using Libvirt's network filters. My goal is to replace the current custom Python/Java code in the Apache CloudStack [0] project by Network Filters of Libvirt. Both IPv4 and IPv6 should work, but I started off with IPv4 and I have issues with accepting back RELATED,ESTABLISHED connections into the VM. In the guest's XML I have this defined: <filterref filter='nwfilter-test'> <parameter name='IP' value='192.168.200.250'/> <parameter name='IPV6' value='2001:db8:100:0:5054:ff:fe9c:6ce6'/> <parameter name='IPV6' value='fe80::5054:ff:fe9c:6ce6'/> </filterref> And the filter currently looks like this: <filter name='nwfilter-test' chain='root'> <uuid>a2493284-9dd5-4c20-98b5-7e70745b53de</uuid>  <filterref filter='no-mac-spoofing'/> <filterref filter='no-ip-spoofing'/> <filterref filter='no-arp-spoofing'/> <filterref filter='allow-dhcp'/>  <rule action='accept' direction='in' priority='100'> <all state='RELATED,ESTABLISHED'/> </rule> <rule action='return' direction='in' priority='500'> <icmp/> </rule> <rule action='accept' direction='in' priority='500'> <tcp dstportstart='22'/> </rule> <rule action='accept' direction='in' priority='500'> <tcp dstportstart='80'/> </rule> <rule action='reject' direction='in' priority='1000'> <all/> </rule> </filter> I can SSH into the VM and also visit the Webserver running on it. But going out the VM results in issues: root@nwfilter-test:~# telnet 109.72.92.155 80 Trying 109.72.92.155... telnet: Unable to connect to remote host: Connection refused root@nwfilter-test:~# I can however ping the same target: root@nwfilter-test:~# ping -c 2 109.72.92.155 PING 109.72.92.155 (109.72.92.155) 56(84) bytes of data. 64 bytes from 109.72.92.155: icmp_seq=1 ttl=56 time=13.2 ms 64 bytes from 109.72.92.155: icmp_seq=2 ttl=56 time=14.1 ms --- 109.72.92.155 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 13.225/13.703/14.182/0.492 ms root@nwfilter-test:~# Looking at iptables-save it seems like the right rules are programmed: -A FI-vnet1 -p icmp -j RETURN -A FI-vnet1 -p tcp -m tcp --sport 22 -m conntrack --ctstate ESTABLISHED -m conntrack --ctdir REPLY -j RETURN -A FI-vnet1 -p tcp -m tcp --sport 80 -m conntrack --ctstate ESTABLISHED -m conntrack --ctdir REPLY -j RETURN -A FI-vnet1 -j REJECT --reject-with icmp-port-unreachable -A FO-vnet1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FO-vnet1 -p icmp -j RETURN -A FO-vnet1 -p tcp -m tcp --dport 22 -m conntrack --ctstate NEW,ESTABLISHED -m conntrack --ctdir ORIGINAL -j ACCEPT -A FO-vnet1 -p tcp -m tcp --dport 80 -m conntrack --ctstate NEW,ESTABLISHED -m conntrack --ctdir ORIGINAL -j ACCEPT -A FO-vnet1 -j REJECT --reject-with icmp-port-unreachable -A HI-vnet1 -p icmp -j RETURN -A HI-vnet1 -p tcp -m tcp --sport 22 -m conntrack --ctstate ESTABLISHED -m conntrack --ctdir REPLY -j RETURN -A HI-vnet1 -p tcp -m tcp --sport 80 -m conntrack --ctstate ESTABLISHED -m conntrack --ctdir REPLY -j RETURN -A HI-vnet1 -j REJECT --reject-with icmp-port-unreachable -A libvirt-host-in -m physdev --physdev-in vnet1 -g HI-vnet1 -A libvirt-in -m physdev --physdev-in vnet1 -g FI-vnet1 -A libvirt-in-post -m physdev --physdev-in vnet1 -j ACCEPT -A libvirt-out -m physdev --physdev-out vnet1 --physdev-is-bridged -g FO-vnet1 I tried changing 'accept' into 'return' for the incoming RELATED,ESTABLISHED rules, but that didn't help. I also tried searching for example of more complex network filters, but all I keep finding are the default filters of Libvirt. Does anybody know what I'm doing wrong here? Or are there any examples of working filters out there? Thank you! Wido [0]: http://cloudstack.apache.org/

1 0

[libvirt-users] Authenticating virsh with username and password
by Petr Kotas 26 Jun '17

26 Jun '17

Hi, I am new to libvirt and still learning, so thanks for any help. I am using libvirt configured with username and password. I need to utilize libvirt service "libvirt-guests.service" to shutdown all my VMs on system shutdown. Unfortunately it fails due to failed authentication. Jun 26 15:56:55 localhost virsh[13326]: All-whitespace username. Jun 26 15:56:55 localhost libvirt-guests.sh[13114]: Unable to connect to libvirt currently. Retrying .. 2Please enter your authenti Jun 26 15:56:55 localhost libvirtd[1155]: End of file while reading data: Input/output error Is it possible to specify user and password somehow? I cannot run kerberos or some other token based authentication. Thanks for any help. Kind regards, Petr Kotas

1 0

[libvirt-users] Configuring VMM for USB/Serial
by Brianna Moczynski 26 Jun '17

26 Jun '17

Hello, I keep receiving errors such as the following: Error rebooting domain: Timed out during operation: cannot acquire state change lock (held by qemuProcessReconnect) Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 90, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/asyncjob.py", line 126, in tmpcb callback(*args, **kwargs) File "/usr/share/virt-manager/virtManager/libvirtobject.py", line 83, in newfn ret = fn(self, *args, **kwargs) File "/usr/share/virt-manager/virtManager/domain.py", line 1378, in reboot self._backend.reboot(0) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 2024, in reboot if ret == -1: raise libvirtError ('virDomainReboot() failed', dom=self) libvirtError: Timed out during operation: cannot acquire state change lock (held by qemuProcessReconnect) Whereby VMM loads, showing my VM in the "Paused" state and will not start, restart, shout down, etc. Restarting libvirt did not seem to have an effect on the issue. I ultimately solved it by removing and reinstalling the VM itself. Additionally, and I believe the issues may be somewhat related, I am having the following issues: libvirt not supporting forwarding ttys as usb serial devices (for pci serial cards (multiple serial ports)) virt-manager not supporting redirecting usb devices by vendor:device id I was wondering if you might have any suggestions on how to configure libvirt so that I do not have these issues. Thanks, BJM

1 0

[libvirt-users] About libvirt concurrency
by 马金舟 26 Jun '17

26 Jun '17

hi all: hello. I would like to ask a question about concurrency. Whether libvirt can achieve at the same time open 200 virtual machines. I try to open 200 virtual machines at the same time. oh on. when i am connected one of the virtual machines, i waited for a long time. I guess libvirt can't achieve concurrent operaction. I wish I could get a real result as soon as possible. thank you.

2 1

[libvirt-users] GPIO support in libvirt
by 陶缘 23 Jun '17

23 Jun '17

Hi, Dear libvirt experts: I am deploying a Virtual Machine to my hardware running linux. The thing is about the LED, the LED is controlled by GPIO operation. I do not know if my current qemu or libvirt can virtualize GPIO operation. And if yes, where can I find the options of qemu or libvirt(preferred) I am using qemu 2.4.0 and libvirt 1.3.2 Appreciate if hear from you Thanks eddy

1 0

[libvirt-users] guest A from virbr0 can talk to guest B in virbr1 but not vice versa
by Travis S. Johnson 20 Jun '17

20 Jun '17

Hello, I came across an interesting problem in my home lab a few weeks ago as I'm prepping for my RHCE exam using Michael Jang study guide. I've been at this for days now, and I still can't wrap my head around how two or more virtual networks in default NAT configuration are even allowed to communicate with each other despite what the libvirt documentation said. Here's the excerpt I'm referring to in the wiki link here: http://wiki.libvirt.org/page/Networking#Forwarding_Incoming_Connections: > By default, guests that are connected via a virtual network with <forward > mode='nat'/> can make any outgoing network connection they like. Incoming > connections are allowed from the host, and from other guests connected to > the same libvirt network, but all other incoming connections are blocked by > iptables rules. Also here's another assertion from 'The virtual network driver' section in http://libvirt.org/firewall.html: > type=nat > > Allow inbound related to an established connection. Allow outbound, but > only from our expected subnet. Allow traffic between guests. Deny all other > inbound. Deny all other outbound. I have three virtual networks with the following configs: ----------------------------------------------------------------------------- <network connections='1'> <name>default</name> <uuid>9c6796be-d54e-42bc-bcbe-2e4feee7154a</uuid> <forward mode='nat'> <nat> <port start='1024' end='65535'/> </nat> </forward> <bridge name='virbr0' stp='on' delay='0'/> <mac address='52:54:00:5a:5d:0e'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254'/> </dhcp> </ip> </network> <network connections='1'> <name>outsider</name> <uuid>247e380a-8795-466a-b94a-5be2d05267bb</uuid> <forward mode='nat'> <nat> <port start='1024' end='65535'/> </nat> </forward> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:7f:a1:fb'/> <domain name='outsider'/> <ip address='192.168.100.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.100.2' end='192.168.100.254'/> </dhcp> </ip> </network> <network connections='1'> <name>besider</name> <uuid>cc714cce-dbba-452d-b2bf-d36084dcb723</uuid> <forward mode='nat'> <nat> <port start='1024' end='65535'/> </nat> </forward> <bridge name='virbr2' stp='on' delay='0'/> <mac address='52:54:00:59:67:7f'/> <domain name='besider'/> <ip address='192.168.110.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.110.2' end='192.168.110.254'/> </dhcp> </ip> </network> ---------------------------------------------------------------------------- Here is the output of the 'FORWARD' iptables chain rules on my host (still using firewall-cmd): ------------------------------------------------------------------------ Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 8967 14M ACCEPT all -- * virbr2 0.0.0.0/0 192.168.110.0/24 ctstate RELATED,ESTABLISHED 5262 279K ACCEPT all -- virbr2 * 192.168.110.0/24 0.0.0.0/0 0 0 ACCEPT all -- virbr2 virbr2 0.0.0.0/0 0.0.0.0/0 70 5832 REJECT all -- * virbr2 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 REJECT all -- virbr2 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 8510 13M ACCEPT all -- * virbr0 0.0.0.0/0 192.168.122.0/24 ctstate RELATED,ESTABLISHED 5177 275K ACCEPT all -- virbr0 * 192.168.122.0/24 0.0.0.0/0 0 0 ACCEPT all -- virbr0 virbr0 0.0.0.0/0 0.0.0.0/0 61 5100 REJECT all -- * virbr0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 REJECT all -- virbr0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 8612 13M ACCEPT all -- * virbr1 0.0.0.0/0 192.168.100.0/24 ctstate RELATED,ESTABLISHED 5172 273K ACCEPT all -- virbr1 * 192.168.100.0/24 0.0.0.0/0 0 0 ACCEPT all -- virbr1 virbr1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- * virbr1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 REJECT all -- virbr1 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_direct all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_IN_ZONES_SOURCE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_IN_ZONES all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_OUT_ZONES_SOURCE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 FORWARD_OUT_ZONES all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate INVALID 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited -------------------------------------------------------------------------- I have a VM in each network: nest1.example.com (virbr0) - 192.168.122.50 nest2.example.org (virbr1) - 192.168.100.100 nest3.example.net (virbr2) - 192.168.110.25 I'm quite aware the above iptables rules were added by libvirt, but I'm still managing the firewall primarily through the *firewall-cmd* command. >From what I gathered... ---------------------------------------------------------- nest3 can ping nest1 and nest2. Nest3 ping nest1 and made a hit here: 8967 14M ACCEPT all -- * virbr2 0.0.0.0/0 192.168.110.0/24 ctstate RELATED,ESTABLISHED 5262 279K ACCEPT all -- virbr2 * 192.168.110.0/24 0.0.0.0/0 Nest3 ping nest2 and made a hit here: 8967 14M ACCEPT all -- * virbr2 0.0.0.0/0 192.168.110.0/24 ctstate RELATED,ESTABLISHED 5262 279K ACCEPT all -- virbr2 * 192.168.110.0/24 0.0.0.0/0 ---------------------------------------------------------- ---------------------------------------------------------- Nest1 can ping nest2, but cannot ping nest3. Nest1 ping nest2 and made a hit here: 8510 13M ACCEPT all -- * virbr0 0.0.0.0/0 192.168.122.0/24 ctstate RELATED,ESTABLISHED 5177 275K ACCEPT all -- virbr0 * 192.168.122.0/24 0.0.0.0/0 Nest1 ping nest3 and made a hit here: 70 5832 REJECT all -- * virbr2 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ---------------------------------------------------------- ---------------------------------------------------------- Nest2 cannot ping nest1 and nest3. Nest2 ping nest1 and made a hit here: 61 5100 REJECT all -- * virbr0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Nest2 ping test3 and made a hit here: 70 5832 REJECT all -- * virbr2 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ---------------------------------------------------------- >From my observation, I see that the order of the virtual networks in the iptables FORWARD chain makes a difference. Each chunk associated with the virtual network in the chain, consisting of five lines, is exactly as described in the aforementioned link (http://libvirt.org/firewall.html) The virtual network in the top chunk of the chain can communicate with virtually all networks as opposed to the network in the last chunk that is consistent with the intention of the original design. I'm using CentOS 7.3 with libvirt 2.0. I even tried reproducing this with CentOS 6.9 as I thought it was possible the firewalld may have influenced the change, but I was still getting similar result. Right now, I'm not certain if this is already a reported known bug, but I'm highly convinced this configuration is unofficially unsupported for quite a while. Can someone confirm this? This is my very first mailing list submission ever, and I apologize in advance if I couldn't figure out how to conveniently search up a similar discussion as this one in the archive. If this is in fact near impossible to implement in accordance to the intended design, then I'd like to have this confirmation publicly included in the docs. Thanks, Travis Johnson

3 4

[libvirt-users] VM fails to start on boot-up
by Andy Gibbs 20 Jun '17

20 Jun '17

Hi, I have created a VM with the option inside virt-manager to "start virtual machine on host boot up". It is the only VM on the host to be configured this way. However, I am getting this error in the log file when it attempts to start it on boot up: 2017-06-19 07:15:18.491+0000: starting up libvirt version: 2.0.0, package: 10.el7_3.9 (CentOS BuildSystem <http://bugs.centos.org>, 2017-05-25-20:52:28, c1bm.rdu2.centos.org) qemu version: 2.6.0 (qemu-kvm-ev-2.6.0-28.el7_3.9.1), hostname: server.mydomain.lan LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin QEMU_AUDIO_DRV=spice /usr/libexec/qemu-kvm -name guest=MyVM,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-1-MyVM/master-key.aes -machine pc-i440fx-rhel7.3.0,accel=kvm,usb=off,vmport=off -cpu Broadwell,+rtm,+hle -m 8192 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -uuid cb6f4d45-091d-47f8-931a-8daf6b0cf2b8 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-1-MyVM/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet -no-shutdown -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot menu=off,strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x6.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6 -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x6.0x1 -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x6.0x2 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive file=/var/lib/libvirt/images/MyVM.qcow2,format=qcow2,if=none,id=drive-virtio-disk0 -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=30 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:0e:2e:75,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/domain-1-MyVM/org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 -chardev spicevmc,id=charchannel1,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=com.redhat.spice.0 -device usb-tablet,id=input0,bus=usb.0,port=1 -spice port=5900,tls-port=5901,addr=127.0.0.1,disable-ticketing,x509-dir=/etc/pki/vdsm/libvirt-spice,seamless-migration=on -device qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,bus=pci.0,addr=0x2 -device intel-hda,id=sound0,bus=pci.0,addr=0x4 -device hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -chardev spicevmc,id=charredir0,name=usbredir -device usb-redir,chardev=charredir0,id=redir0,bus=usb.0,port=2 -chardev spicevmc,id=charredir1,name=usbredir -device usb-redir,chardev=charredir1,id=redir1,bus=usb.0,port=3 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on char device redirected to /dev/pts/0 (label charserial0) ((null):3344): Spice-ERROR **: reds.c:4043:do_spice_init: statistics shm_open failed, Permission denied 2017-06-19 07:15:18.824+0000: shutting down However, when I start the VM manually through virt-manager, it starts up fine. Why might it fail during boot-up? And is there anything I can do to solve the problem? Many thanks, Andy

2 2

[libvirt-users] vendor_id state='off' not working as expected
by Sean Whalen 19 Jun '17

19 Jun '17

Hi All, I'm trying to counter VM detection methods for a malware sandbox, using Pafish as a benchmark tool. https://github.com/a0rtega/pafish I have <hyperv><vendor_id state='off'/></hyperv> defined in a Windows 7 domain on Ubuntu 17.10, but for some reason this just changes the hypervisor vendor to "Microsoft Hv" instead of the default "KVMKVMKVM" vendor. How can I remove the hypervisor vendor completely?

2 1

[libvirt-users] [qemu-kvm] Network bandwidth limits via libvirt
by 卓浩凡 16 Jun '17

16 Jun '17

Hi all, I try to understand why the network bandwidth limits are not applied to my ubuntu 16.04.2 VM (qemu-kvm driver) and I would need some insights. I create my VM network with virsh and when I issue a dumpxml on my network, I can see that bandwidth limits are set: virsh # net-dumpxml nat_limit <network> <name>nat_limit</name> <uuid>4b5e128d-9ad0-4ccc-9424-dee60b71861a</uuid> <forward mode='nat'> <nat> <port start='1024' end='65535'/> </nat> </forward> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:af:99:73'/> <bandwidth> <inbound average='10' peak='50' burst='10'/> <outbound average='128' peak='256' burst='256'/> </bandwidth> <ip address='192.168.123.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.123.2' end='192.168.123.254'/> </dhcp> </ip> </network> And the net info is: virsh # net-info nat_limit Name: nat_limit UUID: 4b5e128d-9ad0-4ccc-9424-dee60b71861a Active: yes Persistent: yes Autostart: yes Bridge: virbr1 Then, I create my VM, and the source of interface is the network, like this: virsh # dumpxml virt20 ... <interface type='network'> <mac address='52:54:00:a2:5b:10'/> <source network='nat_limit' bridge='virbr1'/> <target dev='vnet2'/> <model type='rtl8139'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> ... However when I send a big file with netper I don't see any limits applied to the transfer rate. I've checked the domain log and I didn't see any qemu command line argument related to bandwidth limits. Could you tell me why the network bandwidth limits can not work? Do network limits are managed in another way? Thanks. Below some information about my hypervisor: root@ubuntu-04:~# virsh -V Virsh command line tool of libvirt 1.3.1 See web site at http://libvirt.org/ Compiled with support for: Hypervisors: QEMU/KVM LXC UML Xen LibXL OpenVZ VMWare VirtualBox ESX Test Networking: Remote Network Bridging Interface netcf Nwfilter VirtualPort Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM RBD Sheepdog ZFS Miscellaneous: Daemon Nodedev AppArmor Secrets Debug Readline Modular qemu version: 2.5.0 Thanks, Netsurfed

2 1

[libvirt-users] Isolate VMs' network
by Chris 07 Jun '17

07 Jun '17

All, I'm trying to setup a network with some virtual machines, that can connect to each other and to the internet, but neither to the host nor to other VMs. Is there any preconfigured network filter or best-practice for this setup? Of course, I could setup iptables rules on the host, but I'd prefer libvirt to handle them. - Chris

5 12

Re: [libvirt-users] libvirtd not accepting connections
by Martin Kletzander 06 Jun '17

06 Jun '17

[adding back the ML, you probably hit reply instead of reply-all, this way other people might help if they know more] On Fri, Jun 02, 2017 at 08:10:01AM -0400, Michael C. Cambria wrote: > >Hi, > >libvirtd never seems to get notified that there is work to do. journalct >-f indicated that nothing was logged when connections were attempted via >virsh. > >I also tried 'LIBVIRT_DEBUG=1 libvirtd --verbose' and once startup >finished, there were no more log entries even though virsh attempts were >made. > That's because it gets overridden by the configuration files. This might be a bug, but it's not related to what's happening. >"ps ax" shows about a dozen "qemu-system-alpha" processes. I don't know >if it matters but I didn't expect to see this. I didn't intentionally >configure alpha emulations (assuming that's what it is) and certainly >don't want to waste resources having it running. > Libvirt caches the capabilities of the emulators it can find in your system in order not to waste resources. These processes are expected to go away after they reply with all libvirt asks them for. However, it seems like the initialization cannot be completed precisely due to the fact that these processes don't communicate. There might be some details about qemu-system-alpha that are different when compared to, e.g. qemu-system-x86 and libvirt is not (yet) adapted to them, but I installed that emulator and libvirt daemon runs as usual. It looks like a problem in QEMU. Could you, as a workaround, try uninstalling that qemu binary from your system and restarting the service? Also, what versions of libvirt and qemu do you have installed? >Here is gdb output: > >$ sudo gdb -batch -p $(pidof libvirtd) -ex "t a a bt full" > batch.out >[mcc@eastie-fid4-com triage]$ cat batch.out >[New LWP 17587] >[New LWP 17588] >[New LWP 17589] >[New LWP 17590] >[New LWP 17591] >[New LWP 17592] >[New LWP 17593] >[New LWP 17594] >[New LWP 17595] >[New LWP 17596] >[New LWP 17597] >[New LWP 17598] >[New LWP 17599] >[New LWP 17600] >[New LWP 17601] >[New LWP 17602] >[Thread debugging using libthread_db enabled] >Using host libthread_db library "/lib64/libthread_db.so.1". >0x00007fcd6b4a501d in poll () at ../sysdeps/unix/syscall-template.S:84 >84 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS) > >Thread 17 (Thread 0x7fcd3bf18700 (LWP 17602)): >#0 0x00007fcd6b4a501d in poll () at ../sysdeps/unix/syscall-template.S:84 >No locals. >#1 0x00007fcd6b4c310e in __poll_chk (fds=<optimized out>, >nfds=<optimized out>, timeout=<optimized out>, fdslen=<optimized out>) >at poll_chk.c:27 >No locals. >#2 0x00007fcd6f07bf41 in poll (__timeout=-1, __nfds=<optimized out>, >__fds=0x7fcd3bf16ec0) at /usr/include/bits/poll2.h:41 >No locals. >#3 virCommandProcessIO (cmd=cmd@entry=0x7fcd344228f0) at >util/vircommand.c:2049 > i = <optimized out> > fds = {{fd = 22, events = 1, revents = 0}, {fd = 24, events = >1, revents = 0}, {fd = 1802946632, events = 32717, revents = 0}} > nfds = <optimized out> > outfd = <optimized out> > errfd = 24 > inlen = 0 > outlen = 0 > errlen = 0 > inoff = 0 > ret = 0 > __func__ = "virCommandProcessIO" > __FUNCTION__ = "virCommandProcessIO" >#4 0x00007fcd6f08025a in virCommandRun (cmd=cmd@entry=0x7fcd344228f0, >exitstatus=exitstatus@entry=0x7fcd3bf1749c) at util/vircommand.c:2274 > ret = 0 > outbuf = 0x7fcd341c1850 "`\030\034\064\315\177" > errbuf = 0x0 > st = {st_dev = 140519450702688, st_ino = 5007254661694877440, >st_nlink = 140519321774352, st_mode = 1862726288, st_uid = 32717, st_gid >= 1865325018, __pad0 = 32717, st_rdev = 140732281970554, st_size = 0, >st_blksize = 11, st_blocks = 8, st_atim = {tv_sec = 140519321774368, >tv_nsec = 140519450703056}, st_mtim = {tv_sec = 140519321774352, tv_nsec >= 140519450703024}, st_ctim = {tv_sec = 140520244259750, tv_nsec = >140520310044608}, __glibc_reserved = {140520244259750, 140520310041179, >140519321774320}} > string_io = <optimized out> > async_io = <optimized out> > str = 0x7fcd3bf17420 "\260t\361;\315\177" > tmpfd = <optimized out> > __FUNCTION__ = "virCommandRun" > __func__ = "virCommandRun" >#5 0x00007fcd404a27cf in virQEMUCapsInitQMP (qmperr=0x7fcd3bf174a0, >runGid=107, runUid=107, libDir=<optimized out>, qemuCaps=0x7fcd340fd3e0) >at qemu/qemu_capabilities.c:3700 > cmd = 0x7fcd344228f0 > pid = 0 > ret = -1 > mon = 0x0 > status = 0 > monarg = 0x7fcd343a2570 >"unix:/var/lib/libvirt/qemu/capabilities.monitor.sock,server,nowait" > vm = 0x0 > config = {type = 9, data = {file = {path = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock", append = 0}, nmdm = >{master = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock", slave = 0x0}, tcp = >{host = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock", service = 0x0, listen >= false, protocol = 0}, udp = {bindHost = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock", bindService = 0x0, >connectHost = 0x0, connectService = 0x0}, nix = {path = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock", listen = false}, >spicevmc = 873799056, spiceport = {channel = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock"}}, logfile = 0x0, >logappend = 0} > monpath = 0x7fcd34151d90 >"/var/lib/libvirt/qemu/capabilities.monitor.sock" > pidfile = 0x7fcd341ad8b0 >"/var/lib/libvirt/qemu/capabilities.pidfile" > xmlopt = 0x0 >#6 virQEMUCapsNewForBinaryInternal (binary=binary@entry=0x7fcd34016cb0 >"/usr/bin/qemu-system-alpha", libDir=<optimized out>, >cacheDir=0x7fcd343be860 "/var/cache/libvirt/qemu", runUid=107, >runGid=107, qmpOnly=qmpOnly@entry=false) at qemu/qemu_capabilities.c:3830 > qemuCaps = 0x7fcd340fd3e0 > sb = {st_dev = 64768, st_ino = 1838294, st_nlink = 1, st_mode = >33261, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = >8829680, st_blksize = 4096, st_blocks = 17248, st_atim = {tv_sec = >1496358589, tv_nsec = 77994286}, st_mtim = {tv_sec = 1492132244, tv_nsec >= 0}, st_ctim = {tv_sec = 1494196699, tv_nsec = 451929606}, >__glibc_reserved = {0, 0, 0}} > rv = <optimized out> > qmperr = 0x7fcd341c1870 "" > __FUNCTION__ = "virQEMUCapsNewForBinaryInternal" >#7 0x00007fcd404a3a73 in virQEMUCapsNewForBinary (runGid=<optimized >out>, runUid=<optimized out>, cacheDir=<optimized out>, >libDir=<optimized out>, binary=0x7fcd34016cb0 >"/usr/bin/qemu-system-alpha") at qemu/qemu_capabilities.c:3871 >No locals. >#8 virQEMUCapsCacheLookup (cache=cache@entry=0x7fcd341c9000, >binary=0x7fcd34016cb0 "/usr/bin/qemu-system-alpha") at >qemu/qemu_capabilities.c:3986 > ret = 0x0 > __func__ = "virQEMUCapsCacheLookup" >#9 0x00007fcd404a3d22 in virQEMUCapsInitGuest >(guestarch=VIR_ARCH_ALPHA, hostarch=VIR_ARCH_X86_64, >cache=0x7fcd341c9000, caps=0x7fcd341a9980) at qemu/qemu_capabilities.c:824 > qemubinCaps = 0x0 > x86_32on64_kvm = <optimized out> > ppc64_kvm = <optimized out> > kvmbin = 0x0 > ret = -1 > i = <optimized out> > binary = 0x7fcd34016cb0 "/usr/bin/qemu-system-alpha" > kvmbinCaps = 0x0 > native_kvm = <optimized out> > arm_32on64_kvm = <optimized out> >#10 virQEMUCapsInit (cache=0x7fcd341c9000) at qemu/qemu_capabilities.c:1109 > caps = 0x7fcd341a9980 > i = 1 > hostarch = VIR_ARCH_X86_64 > __func__ = "virQEMUCapsInit" >#11 0x00007fcd404def20 in virQEMUDriverCreateCapabilities >(driver=driver@entry=0x7fcd34342370) at qemu/qemu_conf.c:766 > i = <optimized out> > j = <optimized out> > caps = <optimized out> > sec_managers = 0x0 > doi = <optimized out> > model = <optimized out> > lbl = <optimized out> > type = <optimized out> > cfg = 0x7fcd3448cbb0 > virtTypes = {3, 1} > __FUNCTION__ = "virQEMUDriverCreateCapabilities" > __func__ = "virQEMUDriverCreateCapabilities" >#12 0x00007fcd4051fef3 in qemuStateInitialize (privileged=true, >callback=<optimized out>, opaque=<optimized out>) at qemu/qemu_driver.c:844 > driverConf = 0x0 > conn = 0x0 > cfg = 0x7fcd3448cbb0 > run_uid = <optimized out> > run_gid = <optimized out> > hugepagePath = 0x0 > i = <optimized out> > __FUNCTION__ = "qemuStateInitialize" >#13 0x00007fcd6f1789af in virStateInitialize (privileged=<optimized >out>, callback=0x55f56a9b3180 <daemonInhibitCallback>, >opaque=0x55f56be1cf00) at libvirt.c:770 > i = 9 > __func__ = "virStateInitialize" >#14 0x000055f56a9b31db in daemonRunStateInit (opaque=0x55f56be1cf00) at >libvirtd.c:959 > dmn = 0x55f56be1cf00 > sysident = 0x7fcd34000910 > __func__ = "daemonRunStateInit" >#15 0x00007fcd6f0d98f2 in virThreadHelper (data=<optimized out>) at >util/virthread.c:206 > args = 0x0 > local = {func = 0x55f56a9b31a0 <daemonRunStateInit>, funcName = >0x55f56a9f28d3 "daemonRunStateInit", worker = false, opaque = >0x55f56be1cf00} >#16 0x00007fcd6b7766ca in start_thread (arg=0x7fcd3bf18700) at >pthread_create.c:333 > __res = <optimized out> > pd = 0x7fcd3bf18700 > now = <optimized out> > unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140519450707712, >-3574063505887647860, 0, 140732281962543, 140519450708416, >140519450707712, 3601779982174594956, 3601954753778231180}, >mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = >0x0, cleanup = 0x0, canceltype = 0}}} > not_first_call = <optimized out> > pagesize_m1 = <optimized out> > sp = <optimized out> > freesize = <optimized out> > __PRETTY_FUNCTION__ = "start_thread" >#17 0x00007fcd6b4b0f7f in clone () at >.../sysdeps/unix/sysv/linux/x86_64/clone.S:105 >No locals. > [...]

3 15

[libvirt-users] why increasing vCPUs increasing the CPU sockets for QEMU+KVM
by girish kumar 06 Jun '17

06 Jun '17

Hi All, I am new here, please warn me If I am not following proper etiquette of this mailing list. I am breaking my head, regarding why libvirt is defining multiple CPU sockets when I increase the vCPU count. As and when I increase the vCPU count in libvirt guest XML, it is increasing the CPU sockets in qemu instance. " -smp 4,sockets=4,cores=1,threads=1 " instead " -smp 4,sockets=1,cores=4,threads=1" Does not this lower the performance of the guest as the host and guest architectures gets different in that case. Also please suggest a guest configuration which will take advantage of the host CPU architecture. Your help will be highly appreciated. -- Regards, Girish

2 3

[libvirt-users] vm live migration memory copy
by Hui Jing 04 Jun '17

04 Jun '17

Hi All, I am wondering when we do live migration, how much memory is transferred? I guess it must be one of the three below, but not sure which one: 1. The amount of memory allocated to VM 2. The memory currently used by VM (actual Mem usage in guest) 3. The memory used by the qemu process (RSS). Best Regards, Hui

2 1

[libvirt-users] Debugging Windows 10 Guest Flakiness
by David Morrison 02 Jun '17

02 Jun '17

Hello, I'm not sure if I'm asking this question in the right place, so please redirect me if there's a better list. I recently set up a Windows 10 guest on an Arch Linux host with libvirt and KVM/Qemu, using IOMMU to enable GPU passthrough. I followed this guide to set up the VM: https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF The problem that I'm having is that the guest is very flaky: sometimes the guest will just hang indefinitely, and sometimes the guest loses network connectivity. Usually when either of these behaviors happens, restarting the libvirtd daemon on the host resolves the issue, but that's not always true, and sometimes when I restart libvirtd it causes my entire (host) machine to lock up! I have enabled log_output level 1 in /etc/libvirt/libvirtd.conf and have monitored the log file during one of these hangs, but I don't see any obvious errors or problems in the log file itself (and there's a lot of information to sort through, so I may have missed something). Some specifics about my setup: Motherboard: ASUS Sabertooth X79 CPU: Intel i7 4930K Host GPU: GeForce GT 730 Guest GPU: GeForce GTX 780 Virtual network interface: NAT with the virtio driver I'm *reasonably* confident that the problem is not with the GPU passthrough setup, as I'm able to run FurMark (a GPU burn-in tool) on the guest with no problems. However, I haven't yet been able to reliably reproduce the error at all, so I'm pretty much at a loss as to where to go from here. Can anyone on this list point me in a good direction to look, or have you seen anything like this before? I'm happy to provide debug logs or any other information that is helpful, as well. Thanks for your time, David

1 0

[libvirt-users] No way to stop virStream error after guest stop
by JosÉ Luis Valencia Gutierrez 02 Jun '17

02 Jun '17

Hello everyone, I am opening a virChannel(unix) to a domain and receiving data with a non-blocking virStream using events, when the connected domain gets stopped(which deletes the channel unix socket) by calling destroy, shutdown, pause or migrate on that domain, with the stream open the read event is triggered repeatedly, and virStreamRecv returns 0 bytes indicating EOF but neither virStreamFinish nor virStreamFinish is working to stop the stream to trigger the event . Each time the event is called I got this errors. libvirt: I/O Stream Utils error : this function is not supported by the connection driver: virStreamRecv libvirt: I/O Stream Utils error : this function is not supported by the connection driver: virStreamFinish libvirt: I/O Stream Utils error : this function is not supported by the connection driver: virStreamEventRemoveCallback Is there other way to stop getting this errors? or perhaps this is a bug. Thanks in advance. Jose Valencia

2 8

[libvirt-users] libvirtd not accepting connections
by Michael C. Cambria 01 Jun '17

01 Jun '17

Hi, Ever since I recently upgraded to Fedora 25, I can't get kvm working. It's worked on this system since initial fedora 20 install. All upgrades were done via yum, then once available, dnf. I do have libvirt-sock in LISTENING state: STREAM LISTENING /var/run/libvirt/libvirt-sock I noticed I also have multiple connections in CONNECTING state: STREAM CONNECTING 0 /var/run/libvirt/libvirt-sock STREAM CONNECTING 0 /var/run/libvirt/libvirt-sock STREAM CONNECTING 0 /var/run/libvirt/libvirt-sock I rebooted and tried again. Each e.g. 'virsh -c" or virt-manager command I issue, I end up with another socket in CONNECTING state. restarting libvirtd.service close them leaving just one LISTENING strace for virsh -c shows: 4301 socket(AF_UNIX, SOCK_STREAM, 0) = 5 4301 connect(5, {sa_family=AF_UNIX, sun_path="/var/run/libvirt/libvirt-sock"}, 110) = 0 4301 getsockname(5, {sa_family=AF_UNIX}, [128->2]) = 0 4301 futex(0x7f3c0a2e4fc8, FUTEX_WAKE_PRIVATE, 2147483647) = 0 4301 fcntl(5, F_GETFD) = 0 4301 fcntl(5, F_SETFD, FD_CLOEXEC) = 0 4301 fcntl(5, F_GETFL) = 0x2 (flags O_RDWR) 4301 fcntl(5, F_SETFL, O_RDWR|O_NONBLOCK) = 0 systemctl status libvirtd.service and journalctl -f -u libvirtd.service do not show any log entries for libvird after it has been started. e.g. it doesn't log anything about the connection attempts. Anyone have an idea where to look next? Thanks, MikeC

2 1

[libvirt-users] VM memory monitor
by zhunxun＠gmail.com 01 Jun '17

01 Jun '17

Hello，I want to know what the "virsh dommemstat " really stand for?the rss in result really indicatre the physical memory that the VM has used? thanks! zhunxun(a)gmail.com

1 0