[libvirt-users] Libvirt ESX: Image file not getting copied to ESX server
by varun bhatnagar
Hi,
I am trying to start a node using libvirt on ESX hypervisor. Before
starting I am performing the following steps:
1) vol-create datastore1 /local/new_volume.xml (Creating a volume in pool)
2) define /local/esxdomain.xml (Defining a node)
3) start MyNode (Starting a node)
I tried to get the status of my node and it is showing *running *but I am
not able to ping my node (as it is in network). I later got the console of
my node and found out that my node is not even getting started. It says
"Operating System Not Found". I guess this is because my vmdk image file is
not getting copied and the first command is just placing two files .vmdk
and *-flat.vmdk (these are dummy files I guess). But it is not placing my
original .vmdk files. How to place the original vmdk file in datastore. If
I place it using scp command then libvirt pops out a message saying "Could
not start domain: GenericVmConfigFault". How to resolve this error. I am
pasting my xml files below.
Any help is appreciated... :)
*new_volume.xml:*
*<volume>
<name>test/MyNode.vmdk</name>
<allocation>0</allocation>
<capacity unit='G'>3</capacity>
<target>
<path>/local/vmdk/MyNode.vmdk</path>
<format type='vmdk'/>
</target>
</volume>*
*esxdomain.xml:
*
*<domain type='vmware'>
<name>test</name>
<memory>1048576</memory>
<currentMemory>1048576</currentMemory>
<vcpu>1</vcpu>
<console>/dev/console</console>
<os>
<type arch='x86_64'>hvm</type>
</os>
<devices>
<disk type='file' device='disk'>
<source file='[datastore1] test/MyNode.vmdk'/>
<target dev='sda' bus='scsi'/>
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
<controller type='scsi' index='0' model='lsilogic'/>
<!--controller type='scsi' index='0'/-->
<interface type='bridge'>
<mac address='00:50:56:0f:01:01'/>
<source bridge='VM Network'/>
</interface>
<interface type='bridge'>
<mac address='00:50:56:0f:01:02'/>
<source bridge='dummyPortGroup1'/>
</interface>
<interface type='bridge'>
<mac address='00:50:56:0f:01:03'/>
<source bridge='dummyPortGroup2'/>
</interface>
</devices>
</domain>*
Regards,
Varun
11 years
[libvirt-users] Incremental Backups
by Thomas Stein
Hello.
Is someone performing incremental backups via libvirt for qemu/kvm
machines? I'm still having a hard time to
find a nice procedure. I mean is it possible to make a full backup of an
image on monday a do the next days of the week
incremental backups?
Another way could be mount the image and rsync its contents. Does that
makes sense?
Also i read in qemu changelog:
---
Support for a new block device background job. Started by drive-backup,
it will backup a disk's content to a new file. Unlike drive-mirror, the
new file will include the source disk's content at the time the backup
job was started. Atomic backup of multiple disks is supported using the
"transaction" QMP command.
---
Is this supported by libvirt?
thanks and best regards
thomas
11 years
[libvirt-users] Trouble using virStream with callbacks
by Jonathan Lebon
I am trying to write a simple app which connects a channel obtained
from virDomainOpenChannel() to stdin/stdout (based in part on the
snippet at [1]). However, it seems like the data received back from
the stream is delayed by one iteration. It would be hard to explain
this by simply showing the output, so here's a timeline instead:
1. start the program on the host
2. write "msg from host<Enter>"
3. socat on the guest sees this right away
4. from the guest's socat, write "msg from guest<Enter>"
5. the reply does not show up on the host until AFTER you press
<Enter> (which of course also sends a newline to the guest)
6. this 'one line delay' occurs throughout the conversation,
receiving guest replies to things sent two <Enter>s ago
Doing socat on both sides work as expected. Also, using a blocked
stream and a thread for sending and another for receiving works
as well. It would be nice however if I could get rid of the threads
in favour of callbacks. Not sure if I'm missing something obvious.
Thanks,
Jonathan
[1] https://www.redhat.com/archives/libvir-list/2012-December/msg01084.html
---
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <libvirt/libvirt.h>
#include <fcntl.h>
#define CONNECT_URI "qemu:///system"
#define DOMAIN "TestVM"
#define CHANNEL "channel.0"
#define BUF_SIZE 80
int stream_active = 1;
void
stdin_to_stream(int watch, int fd, int events, void *opaque)
{
virStreamPtr stream = *((virStreamPtr*)(opaque));
if (events & VIR_EVENT_HANDLE_READABLE) {
char buf[1024];
int bytes_read = read(fd, buf, sizeof(buf));
if (bytes_read > 0)
virStreamSend(stream, buf, bytes_read);
}
if (events & (VIR_EVENT_HANDLE_ERROR|VIR_EVENT_HANDLE_HANGUP)) {
stream_active = 0;
}
return;
}
void
stream_to_stdout(virStreamPtr stream, int events, void *opaque)
{
if (events & VIR_EVENT_HANDLE_READABLE) {
char buf[1024];
int bytes_read = virStreamRecv(stream, buf, sizeof(buf));
if (bytes_read > 0) {
fwrite(buf, bytes_read, 1, stdout);
fflush(stdout);
}
}
if (events & (VIR_EVENT_HANDLE_ERROR|VIR_EVENT_HANDLE_HANGUP)) {
stream_active = 0;
}
return;
}
int main(int argc, char *argv[])
{
virConnectPtr conn;
virDomainPtr dom;
virStreamPtr st;
int bytes_read;
char buf[BUF_SIZE];
if ((conn = virConnectOpen(CONNECT_URI)) == NULL)
errx(1, "virConnectOpen");
if ((dom = virDomainLookupByName(conn, DOMAIN)) == NULL)
errx(1, "virDomainLookupByName");
if ((st = virStreamNew(conn, VIR_STREAM_NONBLOCK)) == NULL)
errx(1, "virStreamNew");
if (virDomainOpenChannel(dom, CHANNEL, st, 0) == -1)
errx(1, "virDomainOpenChannel");
if (virEventRegisterDefaultImpl() != 0)
errx(1, "virEventRegisterDefaultImpl");
if (virStreamEventAddCallback(st, 1|4|8, stream_to_stdout, NULL, NULL) != 0)
errx(1, "virStreamEventAddCallback");
int flags = fcntl(fileno(stdin), F_GETFL) | O_NONBLOCK;
fcntl(fileno(stdin), F_SETFL, flags);
if (virEventAddHandle(fileno(stdin), 1|4|8, stdin_to_stream, &st, NULL) < 0)
errx(1, "virEventAddHandle");
while (stream_active) {
if (virEventRunDefaultImpl() != 0) {
errx(1, "virEventRunDefaultImpl");
break;
}
}
if (virStreamFinish(st) < 0)
errx(1, "virStreamFinish");
if (virStreamFree(st) < 0)
errx(1, "virStreamFree");
return 0;
}
11 years
[libvirt-users] Libvirt not able to attach console to VM on ESX hypervisor
by varun bhatnagar
Hi,
I have started a virtual machine on my ESXi server. I was trying to attach
a console to it but when I executed the command I got a message saying that
*"Attaching a console is not supported in the current hypervisor." *Is
there any way (patch or something) through which I can attach a console to
my VM.
The ESX version is 5.1 and I am using latest version of libvirt.
Regards,
Varun
11 years
[libvirt-users] Specifying a USB Device to use USB2 Controller
by Cameron Curle
Hi all,
Can anyone please advise the correct process for defining a USB device to
point to a USB 2 Controller? Specifically, how do you define a USB device
to use the EHCI controller in a guest xml file?
To summarize my problem:
I have 1 x USB1 device and 1 x USB2 device that I would like to use from
within a Windows XP Guest. If I add the USB2 device (Avid M-box) to the
guest machine via Virt-Manager it will not detect in the guest, when I
check the libvirt logs for the VM it shows a "Device speed mismatch" error.
Which leads me to think that its attaching itself to the default UHCI
controller, as the USB1 device functions correctly.
I've followed a similar post on the list here which seems to detail what I
am trying to achieve:
https://www.redhat.com/archives/libvirt-users/2012-June/msg00139.html
I have tried using the controller type and model as below, however, when I
try and define the "port" option, it disappears from the configuration file
and won't attach to the EHCI controller.
<controller type='usb' index='0' model='ich9-ehci' /
I've done some searching but can't find any information on how to
specifically assign a USB device to a certain controller.
Any information or guides you could provide would be much appreciated.
I'm using RHEL 6.4 with latest updates available.
qemu-kvm-0.12.1.2-2.355.el6.4.7
libvirt-0.10.2-18.el6 4.9
I'm currently defining the USB2 device like this:
<hostdev mode='subsystem' type='usb' managed='yes'
<source>
<vendor id='0x0763' />
<product id='0x202a' />
<address bus='1' device='3' />
</source>
</hostdev>
Thank you in advance for your assistance.
Kind Regards,
Cameron
11 years
[libvirt-users] Doc v2: How to use NPIV in libvirt
by Osier Yang
Thanks for John Ferlan's lots of internal feedbacks, I believe it's more
readable, and better orgnized now. Should we create a page for it
under http://libvirt.org/deployment.html or add it in WIKI?
==========================================
NPIV in libvirt
NPIV (N_Port ID Virtualization) is a Fibre Channel technology to
share a single physical Fibre Channel HBA with multiple virtual ports.
Henceforth known as a "virtual port" or "virtual Host Bus Adapter"
(vHBA), each virtual port is identified by its own WWPN (Word Wide
Port Name) and WWNN (Word Wide Node Name). In the virtualization
world the vHBA controls the LUNs for virtual machines.
The libvirt implementation provides flexibility to configure the LUN's
either directly to the virtual machine or as part of a storage pool
which then can be configured for use on a virtual machine.
NPIV support in libvirt was first added to libvirt 0.6.5; however, the
following sections will primarily describe NPIV functionality as of the
current libvirt release, 1.1.2. There will be a troubleshooting and prior
version considerations section to describe some historical differences.
1) Discovery
Discovery of HBA(s) capable of NPIV is provided through the virsh
command 'virsh nodedev-list --cap vports'. If no HBA is returned,
then the host configuration should be checked. The XML output from the
command "virsh nodedev-dumpxml" will list fields <name>, <wwnn>, and
<wwpn> to be used in order to create a vHBA. Take care to also note
the <max_vports> value as this lets you know if the HBA is going to
exceed the maximum vHBA supported.
The following output indicates a host that has two HBAs to support
vHBA and the layout of a HBA's XML:
# virsh nodedev-list --cap vports
scsi_host4
scsi_host5
# virsh nodedev-dumpxml scsi_host5
<device>
<name>scsi_host5</name>
<parent>pci_0000_04_00_1</parent>
<capability type='scsi_host'>
<host>5</host>
<capability type='fc_host'>
<wwnn>2001001b32a9da4e</wwnn>
<wwpn>2101001b32a9da4e</wwpn>
<fabric_wwn>2001000dec9877c1</fabric_wwn>
</capability>
<capability type='vport_ops'>
<max_vports>164</max_vports>
<vports>5</vports>
</capability>
</capability>
</device>
The "max_vports" value indicates there are a possible of 164 vports
available for use in the HBA configuration. The "vports" value indicates
the number of vports currently being used.
Support for detection of HBA's capable of NPIV support prior to libvirt
1.0.4 is described in the "Troubleshooting" section.
2) Creation of a vHBA using the node device driver
In order to create a vHBA using the node device driver, select an HBA with
available "vport" space, use the HBA "<name>" field as the "<parent>"
field in the following XML:
<device>
<parent>scsi_host5</parent>
<capability type='scsi_host'>
<capability type='fc_host'>
</capability>
</capability>
</device>
Then create the vHBA with the command "virsh nodedev-create" (assuming
above XML file is named "vhba.xml"):
# virsh nodedev-create vhba.xml
Node device scsi_host6 created from vhba.xml
NOTE: If you specify "name" for the vHBA, then it will be ignored.
The kernel will automatically pick the next SCSI host name in sequence not
already used. The "wwpn" and "wwnn" values will be automatically generated
by libvirt.
In order to see the generated vHBA XML, use the command "virsh
nodedev-dumpxml" as follows:
# virsh nodedev-dumpxml scsi_host6
<device>
<name>scsi_host6</name>
<parent>scsi_host5</parent>
<capability type='scsi_host'>
<capability type='fc_host'>
<wwnn>2001001b32a9da5e</wwnn>
<wwpn>2101001b32a9da5e</wwpn>
</capability>
</capability>
</device>
This vHBA will only be defined as long the host is not rebooted. In
order to create a persistent vHBA, one must use a libvirt storage pool
(see next section).
3) Creation of vHBA by the storage pool
By design, vHBAs managed by the node device driver are transient across
host reboots. It is recommended to define a libvirt storage pool based
on the vHBA in order to preserve the vHBA configuration. Using a storage
pool has two primary advantage, first the libvirt code will find the
LUN's path via simple virsh command output and second migration of
virtual machine's requires only defining and starting a storage pool
with the same vHBA name on the target machine if you use the LUN with
libvirt storage pool and volume name in virtual machine config (see
section 5).
In order to create a persistent vHBA configuration create
a libvirt 'scsi' storage pool using the XML as follows:
<pool type='scsi'>
<name>poolvhba0</name>
<source>
<adapter type='fc_host' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
</source>
<target>
<path>/dev/disk/by-path</path>
<permissions>
<mode>0700</mode>
<owner>0</owner>
<group>0</group>
</permissions>
</target>
</pool>
You must use the "type='scsi'" for the pool; The source adapter
type must be "fc_host". Attributes "wwnn" and "wwpn" are provided as
the unique identifier for the vHBA to be created.
There is an optional attribute "parent" for source the adapter. It
indicates the name of the HBA which you want to use to create the
vHBA. Its value should be consistent with what node device driver
dumps (e.g. scsi_host5). If it's not specified, libvirt will pick
the first HBA capable of NPIV that has not exceeded the maximum
vports it supports.
NOTE: You can also create a scsi pool with source adapter type "fc_host"
for a HBA, and in that case the attribute "parent" is not necessary.
If you prefer to choose which parent HBA to use for your vHBA, then
you must provide the parent, wwnn, and wwpn in the source adapter XML as
follows:
<source>
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b'
wwpn='10000000c9831b4b'/>
</source>
To define the persistent pool (assuming above XML is named as
poolvhba0.xml):
# virsh pool-define poolvhba0.xml
NOTE: One must use pool-define to define the pool as persistent,
since a pool created by pool-create is transient and it will disappear
after a system reboot or a libvirtd restart.
To start the pool:
# virsh pool-start poolvhba0
To destroy the pool:
# virsh pool-destroy poolvhba0
When starting the pool, libvirt will check if the vHBA with same
"wwpn:wwpn" already exists. If it does not exist, a new vHBA with the
provided "wwpn:wwnn" will be created. Correspondingly,when destroying
the pool the vHBA is destroyed too.
Finally, in order to ensure that subsequent reboots of your host will
automatically define vHBA's for use in virtual machines, one must set the
storage pool autostart feature as follows (assuming the name of the created
pool was "poolvhba0"):
# virsh pool-autostart poolvhba0
4) Finding LUNs on your vHBA
4.1) Utilizing LUN's from a vHBA created by the storage pool
Assuming that a storage pool was created for a vHBA, use the command
"virsh vol-list" command in order to generate a list of available LUN's
on the vHBA, as follows:
# virsh vol-list poolvhba0 --details
Name Path
---------------------------------------------------------------------
unit:0:2:0
/dev/disk/by-path/pci-0000:04:00.1-fc-0x203500a0b85ad1d7-lun-0 block
The list of LUN names displayed will be available for use as disk volumes
in virtual machine configurations.
4.2) Utilizing LUN's from a vHBA created using the node device driver
Finding an available LUN from a vHBA created using the node device driver
can be achieved either via use of the "virsh nodedev-list" command or
through manual searching of the hosts system file system.
Use the "virsh nodedev-list --tree | more" and find the parent HBA
to which the vHBA was configured. The following example lists the
pertinent part of the tree for the example HBA "scsi_host5":
+- scsi_host5
|
+- scsi_host7
+- scsi_target5_0_0
| |
| +- scsi_5_0_0_0
|
+- scsi_target5_0_1
| |
| +- scsi_5_0_1_0
|
+- scsi_target5_0_2
| |
| +- scsi_5_0_2_0
| |
| +- block_sdb_3600a0b80005adb0b0000ab2d4cae9254
|
+- scsi_target5_0_3
|
+- scsi_5_0_3_0
The "block_" indicates it's a block device, the "sdb_" is a
convention to signify the the short device path of "/dev/sdb", and the
short device path or the number can be used to search the
"/dev/disk/by-{id,path,uuid,label}/" name space for the specific LUN
by name, for example:
# ls /dev/disk/by-id/ | grep 3600a0b80005adb0b0000ab2d4cae9254
scsi-3600a0b80005adb0b0000ab2d4cae9254
# ls /dev/disk/by-path/ -l | grep sdb
lrwxrwxrwx. 1 root root 9 Sep 16 05:58
pci-0000:04:00.1-fc-0x203500a0b85ad1d7-lun-0 -> ../../sdb
As an option to using "virsh nodedev-list", it is possible to manually
iterate through the "/sys/bus/scsi/device" and "/dev/disk/by-path"
directory trees in order to find a LUN using the following steps:
1. Iterate over all the directories beginning with the SCSI host number
of the vHBA under the "/sys/bus/scsi/devices" tree. For example, if the
SCSI host number is 6, the command would be:
# ls /sys/bus/scsi/devices/6:* -d
/sys/bus/scsi/devices/6:0:0:0 /sys/bus/scsi/devices/6:0:1:0
/sys/bus/scsi/devices/6:0:2:0 /sys/bus/scsi/devices/6:0:3:0
2. List the "block" names of all the entries belongs to the SCSI host
as follows:
# ls /sys/bus/scsi/devices/6:*/block/
/sys/bus/scsi/devices/6:0:2:0/block/:
sdc
/sys/bus/scsi/devices/6:0:3:0/block/:
sdd
This indicates that "scsi_host6" has two LUNs, one is attached to
"6:0:2:0", with the short device name "sdc", and the other is attached
to "6:0:3:0", with the short device name "sdd".
3. Determine the stable path to the LUN.
Unfortunately a device name such as "sdc" is not stable enough for use
by libvirt. In order to get the stable path, use the "ls -l
/dev/disk/by-path"
and look for the "sdc" path:
# ls -l /dev/disk/by-path/ | grep sdc
lrwxrwxrwx. 1 root root 9 Sep 10 22:28
pci-0000:08:00.1-fc-0x205800a4085a3127-lun-0 -> ../../sdc
Thus "/dev/disk/by-path/pci-0000:08:00.1-fc-0x205800a4085a3127-lun-0"
is the stable path of the LUN attached to address "6:0:2:0" and will be
used in virtual machine configurations.
5) Virtual machine configuration change to use vHBA LUN
Adding the vHBA LUN to the virtual machine configuration is done via
an XML modification to the virtual machine.
5.1) Using a LUN from a vHBA created by the storage pool
Adding the vHBA LUN to the virtual machine is handled via XML to create
a disk volume on the virtual machine with the following example XML:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='poolvhba0' volume='unit:0:2:0'/>
<target dev='hda' bus='ide'/>
</disk>
In particular note the usage of the "<source>" directive with the "pool"
and "volume" attributes listing the storage pool and the short volume
name.
5.2) Using a LUN from a vHBA created using the node device driver
Configuring a vHBA on the virtual machine can be done with its
stable path (path of {by-id|by-path|by-uuid|by-label}). The following is an
XML example of a direct LUN path:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source
dev='/dev/disk/by-path/pci-0000\:04\:00.1-fc-0x203400a0b85ad1d7-lun-0'/>
<target dev='sda' bus='scsi'/>
</disk>
NOTE: The use of "device='disk'" and the long "<source>" device name.
The example uses the "by-path" option. The backslashes prior to the
colons are required, since colons can be considered as delimiters.
5.3) To configure the LUN as a pass-through device, use the following XML
examples.
For a vHBA created using the node device driver:
<disk type='volume' device='lun'>
<driver name='qemu' type='raw'/>
<source
dev='/dev/disk/by-path/pci-0000\:04\:00.1-fc-0x203400a0b85ad1d7-lun-0'/>
<target dev='sda' bus='scsi'/>
</disk>
NOTE: The use of "device='lun'" and again the long "<source>" device
name. Again, the backslashes prior to the colons are required.
For a vHBA created by a storage pool:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='poolvhba0' volume='unit:0:2:0'/>
<target dev='hda' bus='ide'/>
</disk>
Although it is possible to use the LUN's path as the disk source for a
vHBA created by the storage pool, it is recommended to use libvirt storage
pool and storage volume instead.
6) Destroying a vHBA
A vHBA created by the storage pool can be destroyed by the virsh command
"pool-destroy", for example:
# virsh pool-destroy poolvhba0
NOTE: If the storage pool is persistent, the vHBA will also be removed
by libvirt when it destroys the storage pool.
A vHBA created using the node device driver can be destroyed by the
command "virsh nodedev-destroy", for example (assuming that scsi_host6
was created as shown earlier):
# virsh nodedev-destroy scsi_host6
Destroying a vHBA removes it just as a reboot would do since the node
device driver does not support persistent configurations.
7) Troubleshooting
7.1) Discovery of HBA capable of NPIV prior to 1.0.4
Prior to libvirt 1.0.4, discovery of HBAs capable of NPIV
requires checking each of the HBAs on the host for the capability flag
"vport_ops", as follows:
First you need to find out all the HBA by capability flag "scsi_host":
# virsh nodedev-list --cap scsi_host
scsi_host0
scsi_host1
scsi_host2
scsi_host3
scsi_host4
scsi_host5
Now check each HBA to find one with the "vport_ops" capability, either
one at a time as follows:
# virsh nodedev-dumpxml scsi_host3
<device>
<name>scsi_host3</name>
<parent>pci_0000_00_08_0</parent>
<capability type='scsi_host'>
<host>3</host>
</capability>
</device>
That says "scsi_host3" doesn't support vHBA
# virsh nodedev-dumpxml scsi_host5
<device>
<name>scsi_host5</name>
<parent>pci_0000_04_00_1</parent>
<capability type='scsi_host'>
<host>5</host>
<capability type='fc_host'>
<wwnn>2001001b32a9da4e</wwnn>
<wwpn>2101001b32a9da4e</wwpn>
<fabric_wwn>2001000dec9877c1</fabric_wwn>
</capability>
<capability type='vport_ops' />
</capability>
</device>
But "scsi_host5" supports it.
NOTE: In addition to libvirt 1.0.4 automating the lookup of HBA's capable
of supporting a vHBA configuration, the XML tags "max_vports" and "vports"
will describe the maximum vports allowed and the current vports in use.
As an alternative and smarter way, you can avoid above cumbersome steps
by simple script like:
for i in $(virsh nodedev-list --cap scsi_host); do
if virsh nodedev-dumpxml $i | grep vport_ops > /dev/null; then
echo $i;
fi
done
NOTE: It is possible that node device is named "pci_10df_fe00_scsi_host_0".
This is because libvirt supports two backends for the node device driver
("udev" and "HAL"), but they lead to completely different naming styles.
The udev backend is preferred over the HAL backend since HAL support
is in maintenance mode. The udev backend is more common; however, if
your destribution packager built the libvirt binaries without the
udev backend, then the more complicated names such as
"pci_10df_fe00_scsi_host_0" must be used.
7.2) Creation of a vHBA using the node device driver prior to 0.9.10
For libvirt prior to 0.9.10, you will need to specify the "wwnn" and "wwpn"
manually when creating a vHBA, example XML as follows:
<device>
<name>scsi_host6</name>
<parent>scsi_host5</parent>
<capability type='scsi_host'>
<capability type='fc_host'>
<wwnn>2001001b32a9da5e</wwnn>
<wwpn>2101001b32a9da5e</wwpn>
</capability>
</capability>
</device>
7.3) Creation of storage pool based on vHBA prior to 1.0.5
Prior to libvirt 1.0.5, one can define a "scsi" type pool based on a
vHBA by it's SCSI host name (e.g. "host5" in XML below), using an example
XML as follows:
<pool type='scsi'>
<name>poolhba0</name>
<uuid>e9392370-2917-565e-692b-d057f46512d6</uuid>
<capacity unit='bytes'>0</capacity>
<allocation unit='bytes'>0</allocation>
<available unit='bytes'>0</available>
<source>
<adapter name='host0'/>
</source>
<target>
<path>/dev/disk/by-path</path>
<permissions>
<mode>0700</mode>
<owner>0</owner>
<group>0</group>
</permissions>
</target>
</pool>
There are two disadvantage of using the SCSI host name as the source
adapter. First the SCSI host number is not stable, thus it may cause trouble
for your storage pool after a system reboot. Second, the adapter name
(e.g. "host5") is not consistent with node device name (e.g. "scsi_host5").
Moreover, using the SCSI host name as the source adapter doesn't
allow you to create a vHBA.
NOTE: Since 1.0.5, the source adapter name was changed to be consistent
with node device name, thus the second disadvantage is destroyed.
Regards,
Osier
11 years
[libvirt-users] libvirt report error "error: End of file while reading data: Input/output error" when start domain
by Bing Bu Cao
Hi,
When I want to start a VM by virsh, report error:
virsh start vm1
2013-09-18 05:52:06.809+0000: 12324: info : libvirt version: 1.1.1,
package: 1.mcp8_0.1 (Koji, 2013-08-09-07:55:01, lnxmcp1)
2013-09-18 05:52:06.809+0000: 12324: debug : virLogParseOutputs:1334 :
outputs=1:file:/var/log/virsh.log
error: Failed to start domain vm1
error: End of file while reading data: Input/output error
error: One or more references were leaked after disconnect from the
hypervisor
error: Reconnected to the hypervisor
I check the libvirtd.log and found the 'default' network is not active.
If start the 'default' at first, virsh start will run sucessfully.
But I was wondering why the virsh report different error against libvirtd.
And why the virsh did not report "network 'default' is not active" error
instead of "error: End of file while reading data: Input/output error" ?
From the virsh log I found libvirt tried to read message from the
socket and failed, but no idea why this happened when no 'default' network?
Here is the virsh log:
info : libvirt version: 1.1.1, package: 1.mcp8_0.1 (Koji,
2013-08-09-07:55:01, lnxmcp1)
debug : virGlobalInit:436 : register drivers
debug : virRegisterDriver:762 : driver=0x3fffd164b78 name=Test
debug : virRegisterDriver:774 : registering Test as driver 0
debug : virRegisterNetworkDriver:609 : registering Test as network
driver 0
debug : virRegisterInterfaceDriver:636 : registering Test as interface
driver 0
debug : virRegisterStorageDriver:663 : registering Test as storage
driver 0
debug : virRegisterNodeDeviceDriver:690 : registering Test as device
driver 0
debug : virRegisterSecretDriver:717 : registering Test as secret driver 0
debug : virRegisterNWFilterDriver:744 : registering Test as network
filter driver 0
debug : virRegisterDriver:762 : driver=0x3fffd165dd8 name=ESX
debug : virRegisterDriver:774 : registering ESX as driver 1
debug : virRegisterInterfaceDriver:636 : registering ESX as interface
driver 1
debug : virRegisterNetworkDriver:609 : registering ESX as network driver 1
debug : virRegisterStorageDriver:663 : registering ESX as storage driver 1
debug : virRegisterNodeDeviceDriver:690 : registering ESX as device
driver 1
debug : virRegisterSecretDriver:717 : registering ESX as secret driver 1
debug : virRegisterNWFilterDriver:744 : registering ESX as network
filter driver 1
debug : virRegisterDriver:762 : driver=0x3fffd165588 name=remote
debug : virRegisterDriver:774 : registering remote as driver 2
debug : virRegisterNetworkDriver:609 : registering remote as network
driver 2
debug : virRegisterInterfaceDriver:636 : registering remote as
interface driver 2
debug : virRegisterStorageDriver:663 : registering remote as storage
driver 2
debug : virRegisterNodeDeviceDriver:690 : registering remote as device
driver 2
debug : virRegisterSecretDriver:717 : registering remote as secret
driver 2
debug : virRegisterNWFilterDriver:744 : registering remote as network
filter driver 2
debug : virEventRegisterDefaultImpl:230 : registering default event
implementation
debug : virEventPollAddHandle:111 : Used 0 handle slots, adding at
least 10 more
debug : virEventPollInterruptLocked:710 : Skip interrupt, 0 0
debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=1
fd=5 events=1 cb=0x3fffceb67a8 opaque=(nil) ff=(nil)
debug : virEventRegisterImpl:203 : addHandle=0x3fffceb7060
updateHandle=0x3fffceb7450 removeHandle=0x3fffceb6814
addTimeout=0x3fffceb69c8 updateTimeout=0x3fffceb6c24
removeTimeout=0x3fffceb6e2c
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 1
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virConnectOpenAuth:1457 : name=(null), auth=0x3fffd164728, flags=0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a1e10
classname=virConnect
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a1f40
classname=virConnectCloseCallbackData
debug : virConnectGetConfigFile:998 : Loading config file
'/etc/libvirt/libvirt.conf'
debug : virConfReadFile:745 : filename=/etc/libvirt/libvirt.conf
debug : virFileClose:90 : Closed fd 7
debug : do_open:1173 : no name, allowing driver auto-select
debug : do_open:1215 : trying driver 0 (Test) ...
debug : do_open:1222 : driver 0 Test returned DECLINED
debug : do_open:1215 : trying driver 1 (ESX) ...
debug : do_open:1222 : driver 1 ESX returned DECLINED
debug : do_open:1215 : trying driver 2 (remote) ...
debug : remoteConnectOpen:998 : Auto-probe remote URI
debug : doRemoteOpen:599 : proceeding with name =
debug : doRemoteOpen:608 : Connecting with transport 1
debug : doRemoteOpen:699 : Proceeding with sockname
/var/run/libvirt/libvirt-sock
debug : virNetSocketNew:155 : localAddr=0x3ffff825180
remoteAddr=0x3ffff825208 fd=7 errfd=-1 pid=0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2520
classname=virNetSocket
debug : virNetSocketNew:205 : RPC_SOCKET_NEW: sock=0x2aad62a2520 fd=7
errfd=-1 pid=0 localAddr=127.0.0.1;0, remoteAddr=127.0.0.1;0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2920
classname=virNetClient
debug : virNetClientNew:326 : RPC_CLIENT_NEW: client=0x2aad62a2920
sock=0x2aad62a2520
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2920
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2520
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=2
fd=7 events=1 cb=0x3fffcff79e4 opaque=0x2aad62a2520 ff=0x3fffcff7948
debug : virKeepAliveNew:196 : client=0x2aad62a2920, interval=-1, count=0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2c20
classname=virKeepAlive
debug : virKeepAliveNew:215 : RPC_KEEPALIVE_NEW: ka=0x2aad62a2c20
client=0x2aad62a2920
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2920
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a1f40
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2eb0
classname=virNetClientProgram
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2850
classname=virNetClientProgram
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a3040
classname=virNetClientProgram
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2eb0
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2850
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a3040
debug : doRemoteOpen:816 : Trying authentication
debug : virNetMessageNew:44 : msg=0x2aad62a2ce0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 28
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a2920 len=28 prog=536903814 vers=1 proc=66 type=0
status=0 serial=0
debug : virNetClientCallNew:1905 : New call 0x2aad62a31c0:
msg=0x2aad62a2ce0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=0 proc=66 type=0 length=28 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a31c0
call=0x2aad62a31c0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 36 total
(32 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a2920 len=36 prog=536903814 vers=1 proc=66 type=1
status=0 serial=0
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a2c20,
client=0x2aad62a2920, msg=0x2aad62a2988
debug : virNetMessageClear:55 : msg=0x2aad62a2988 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a31c0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a31c0 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a2ce0 nfds=0 cb=(nil)
debug : virNetMessageNew:44 : msg=0x2aad62a2ce0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 32
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a2920 len=32 prog=536903814 vers=1 proc=60 type=0
status=0 serial=1
debug : virNetClientCallNew:1905 : New call 0x2aad62a20f0:
msg=0x2aad62a2ce0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=1 proc=60 type=0 length=32 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a20f0
call=0x2aad62a20f0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 32 total
(28 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a2920 len=32 prog=536903814 vers=1 proc=60 type=1
status=0 serial=1
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a2c20,
client=0x2aad62a2920, msg=0x2aad62a2988
debug : virNetMessageClear:55 : msg=0x2aad62a2988 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a20f0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a20f0 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a2ce0 nfds=0 cb=(nil)
debug : doRemoteOpen:842 : Trying to open URI
debug : virNetMessageNew:44 : msg=0x2aad62a2ce0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 40
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a2920 len=40 prog=536903814 vers=1 proc=1 type=0 status=0
serial=2
debug : virNetClientCallNew:1905 : New call 0x2aad62a20f0:
msg=0x2aad62a2ce0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=2 proc=1 type=0 length=40 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a20f0
call=0x2aad62a20f0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 28 total
(24 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a2920 len=28 prog=536903814 vers=1 proc=1 type=1 status=0
serial=2
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a2c20,
client=0x2aad62a2920, msg=0x2aad62a2988
debug : virNetMessageClear:55 : msg=0x2aad62a2988 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a20f0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a20f0 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a2ce0 nfds=0 cb=(nil)
debug : doRemoteOpen:853 : Trying to query remote URI
debug : virNetMessageNew:44 : msg=0x2aad62a2ce0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 28
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a2920 len=28 prog=536903814 vers=1 proc=110 type=0
status=0 serial=3
debug : virNetClientCallNew:1905 : New call 0x2aad62a20f0:
msg=0x2aad62a2ce0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=3 proc=110 type=0 length=28 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a20f0
call=0x2aad62a20f0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 48 total
(44 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a2920 len=48 prog=536903814 vers=1 proc=110 type=1
status=0 serial=3
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a2c20,
client=0x2aad62a2920, msg=0x2aad62a2988
debug : virNetMessageClear:55 : msg=0x2aad62a2988 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a20f0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a20f0 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a2ce0 nfds=0 cb=(nil)
debug : doRemoteOpen:861 : Auto-probed URI is qemu:///system
debug : do_open:1222 : driver 2 remote returned SUCCESS
debug : do_open:1248 : network driver 0 Test returned DECLINED
debug : do_open:1248 : network driver 1 ESX returned DECLINED
debug : do_open:1248 : network driver 2 remote returned SUCCESS
debug : do_open:1264 : interface driver 0 Test returned DECLINED
debug : do_open:1264 : interface driver 1 ESX returned DECLINED
debug : do_open:1264 : interface driver 2 remote returned SUCCESS
debug : do_open:1281 : storage driver 0 Test returned DECLINED
debug : do_open:1281 : storage driver 1 ESX returned DECLINED
debug : do_open:1281 : storage driver 2 remote returned SUCCESS
debug : do_open:1298 : node driver 0 Test returned DECLINED
debug : do_open:1298 : node driver 1 ESX returned DECLINED
debug : do_open:1298 : node driver 2 remote returned SUCCESS
debug : do_open:1315 : secret driver 0 Test returned DECLINED
debug : do_open:1315 : secret driver 1 ESX returned DECLINED
debug : do_open:1315 : secret driver 2 remote returned SUCCESS
debug : do_open:1332 : nwfilter driver 0 Test returned DECLINED
debug : do_open:1332 : nwfilter driver 1 ESX returned DECLINED
debug : do_open:1332 : nwfilter driver 2 remote returned SUCCESS
debug : virConnectRegisterCloseCallback:21344 : conn=0x2aad62a1e10
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a1e10
debug : virConnectIsAlive:21292 : conn=0x2aad62a1e10
debug : virDomainLookupByName:2242 : conn=0x2aad62a1e10, name=vm1
debug : virNetMessageNew:44 : msg=0x2aad62a2ce0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 36
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a2920 len=36 prog=536903814 vers=1 proc=23 type=0
status=0 serial=4
debug : virNetClientCallNew:1905 : New call 0x2aad62a2e40:
msg=0x2aad62a2ce0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=4 proc=23 type=0 length=36 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a2e40
call=0x2aad62a2e40
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 56 total
(52 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a2920 len=56 prog=536903814 vers=1 proc=23 type=1
status=0 serial=4
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a2c20,
client=0x2aad62a2920, msg=0x2aad62a2988
debug : virNetMessageClear:55 : msg=0x2aad62a2988 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a2e40
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a2e40 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a2ce0 nfds=0 cb=(nil)
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2bb0
classname=virDomain
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a1e10
debug : virDomainGetID:3598 : dom=0x2aad62a2bb0, (VM: name=vm1,
uuid=22d16da9-e05d-4e0f-bab4-bbacdfb82c92)
debug : virDomainCreate:9415 : dom=0x2aad62a2bb0, (VM: name=vm1,
uuid=22d16da9-e05d-4e0f-bab4-bbacdfb82c92)
debug : virNetMessageNew:44 : msg=0x2aad62a2ce0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 56
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a2920 len=56 prog=536903814 vers=1 proc=9 type=0 status=0
serial=5
debug : virNetClientCallNew:1905 : New call 0x2aad62a2ad0:
msg=0x2aad62a2ce0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=5 proc=9 type=0 length=56 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a2ad0
call=0x2aad62a2ad0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=2 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=2, f=7 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
error : virNetSocketReadWire:1377 : End of file while reading data:
Input/output error
debug : virNetClientMarkClose:633 : client=0x2aad62a2920, reason=0
debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2
debug : virEventPollRemoveHandle:193 : mark delete 1 7
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a2ad0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virNetClientCloseLocked:646 : client=0x2aad62a2920,
sock=0x2aad62a2520, reason=0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2520
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2920
debug : virKeepAliveStop:307 : RPC_KEEPALIVE_STOP: ka=0x2aad62a2c20
client=0x2aad62a2920
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2c20
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a2c20
debug : virKeepAliveDispose:227 : RPC_KEEPALIVE_DISPOSE: ka=0x2aad62a2c20
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2920
debug : remoteClientCloseFunc:361 : Triggering connection close
callback 0x2aad61b6efc reason=0, opaque=(nil)
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2920
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a2ad0 rv=-1
debug : virNetMessageFree:72 : msg=0x2aad62a2ce0 nfds=0 cb=(nil)
debug : virDomainGetName:3510 : domain=0x2aad62a2bb0
debug : virDomainFree:2406 : dom=0x2aad62a2bb0, (VM: name=vm1,
uuid=22d16da9-e05d-4e0f-bab4-bbacdfb82c92)
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2bb0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a2bb0
debug : virDomainDispose:262 : release domain 0x2aad62a2bb0 vm1
22d16da9-e05d-4e0f-bab4-bbacdfb82c92
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a1e10
debug : virConnectUnregisterCloseCallback:21400 : conn=0x2aad62a1e10
error : virConnectUnregisterCloseCallback:21417 : Requested operation
is not valid: A different callback was requested
debug : virConnectClose:1501 : conn=0x2aad62a1e10
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a1e10
debug : virConnectOpenAuth:1457 : name=(null), auth=0x3fffd164728, flags=0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2ef0
classname=virConnect
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a31d0
classname=virConnectCloseCallbackData
debug : virConnectGetConfigFile:998 : Loading config file
'/etc/libvirt/libvirt.conf'
debug : virConfReadFile:745 : filename=/etc/libvirt/libvirt.conf
debug : virFileClose:90 : Closed fd 10
debug : do_open:1173 : no name, allowing driver auto-select
debug : do_open:1215 : trying driver 0 (Test) ...
debug : do_open:1222 : driver 0 Test returned DECLINED
debug : do_open:1215 : trying driver 1 (ESX) ...
debug : do_open:1222 : driver 1 ESX returned DECLINED
debug : do_open:1215 : trying driver 2 (remote) ...
debug : remoteConnectOpen:998 : Auto-probe remote URI
debug : doRemoteOpen:599 : proceeding with name =
debug : doRemoteOpen:608 : Connecting with transport 1
debug : doRemoteOpen:699 : Proceeding with sockname
/var/run/libvirt/libvirt-sock
debug : virNetSocketNew:155 : localAddr=0x3ffff825180
remoteAddr=0x3ffff825208 fd=10 errfd=-1 pid=0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a35c0
classname=virNetSocket
debug : virNetSocketNew:205 : RPC_SOCKET_NEW: sock=0x2aad62a35c0 fd=10
errfd=-1 pid=0 localAddr=127.0.0.1;0, remoteAddr=127.0.0.1;0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a3900
classname=virNetClient
debug : virNetClientNew:326 : RPC_CLIENT_NEW: client=0x2aad62a3900
sock=0x2aad62a35c0
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a3900
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a35c0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=3
fd=10 events=1 cb=0x3fffcff79e4 opaque=0x2aad62a35c0 ff=0x3fffcff7948
debug : virKeepAliveNew:196 : client=0x2aad62a3900, interval=-1, count=0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a3ab0
classname=virKeepAlive
debug : virKeepAliveNew:215 : RPC_KEEPALIVE_NEW: ka=0x2aad62a3ab0
client=0x2aad62a3900
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a3900
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a31d0
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a37f0
classname=virNetClientProgram
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a2050
classname=virNetClientProgram
debug : virObjectNew:199 : OBJECT_NEW: obj=0x2aad62a3bb0
classname=virNetClientProgram
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a37f0
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2050
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a3bb0
debug : doRemoteOpen:816 : Trying authentication
debug : virNetMessageNew:44 : msg=0x2aad62a3db0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 28
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a3900 len=28 prog=536903814 vers=1 proc=66 type=0
status=0 serial=0
debug : virNetClientCallNew:1905 : New call 0x2aad62b3ec0:
msg=0x2aad62a3db0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=0 proc=66 type=0 length=28 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62b3ec0
call=0x2aad62b3ec0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 3
debug : virEventPollCleanupHandles:575 : EVENT_POLL_PURGE_HANDLE: watch=2
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2920
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2520
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a2520
debug : virNetSocketDispose:1002 : RPC_SOCKET_DISPOSE: sock=0x2aad62a2520
debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2
debug : virFileClose:90 : Closed fd 7
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 36 total
(32 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a3900 len=36 prog=536903814 vers=1 proc=66 type=1
status=0 serial=0
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a3ab0,
client=0x2aad62a3900, msg=0x2aad62a3968
debug : virNetMessageClear:55 : msg=0x2aad62a3968 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62b3ec0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62b3ec0 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a3db0 nfds=0 cb=(nil)
debug : virNetMessageNew:44 : msg=0x2aad62a3db0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 32
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a3900 len=32 prog=536903814 vers=1 proc=60 type=0
status=0 serial=1
debug : virNetClientCallNew:1905 : New call 0x2aad62a2660:
msg=0x2aad62a3db0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=1 proc=60 type=0 length=32 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a2660
call=0x2aad62a2660
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 32 total
(28 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a3900 len=32 prog=536903814 vers=1 proc=60 type=1
status=0 serial=1
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a3ab0,
client=0x2aad62a3900, msg=0x2aad62a3968
debug : virNetMessageClear:55 : msg=0x2aad62a3968 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a2660
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a2660 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a3db0 nfds=0 cb=(nil)
debug : doRemoteOpen:842 : Trying to open URI
debug : virNetMessageNew:44 : msg=0x2aad62a3db0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 40
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a3900 len=40 prog=536903814 vers=1 proc=1 type=0 status=0
serial=2
debug : virNetClientCallNew:1905 : New call 0x2aad62a25a0:
msg=0x2aad62a3db0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=2 proc=1 type=0 length=40 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a25a0
call=0x2aad62a25a0
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 28 total
(24 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a3900 len=28 prog=536903814 vers=1 proc=1 type=1 status=0
serial=2
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a3ab0,
client=0x2aad62a3900, msg=0x2aad62a3968
debug : virNetMessageClear:55 : msg=0x2aad62a3968 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a25a0
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a25a0 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a3db0 nfds=0 cb=(nil)
debug : doRemoteOpen:853 : Trying to query remote URI
debug : virNetMessageNew:44 : msg=0x2aad62a3db0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 28
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a3900 len=28 prog=536903814 vers=1 proc=110 type=0
status=0 serial=3
debug : virNetClientCallNew:1905 : New call 0x2aad62a2670:
msg=0x2aad62a3db0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=3 proc=110 type=0 length=28 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a2670
call=0x2aad62a2670
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 48 total
(44 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a3900 len=48 prog=536903814 vers=1 proc=110 type=1
status=0 serial=3
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a3ab0,
client=0x2aad62a3900, msg=0x2aad62a3968
debug : virNetMessageClear:55 : msg=0x2aad62a3968 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a2670
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a2670 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a3db0 nfds=0 cb=(nil)
debug : doRemoteOpen:861 : Auto-probed URI is qemu:///system
debug : do_open:1222 : driver 2 remote returned SUCCESS
debug : do_open:1248 : network driver 0 Test returned DECLINED
debug : do_open:1248 : network driver 1 ESX returned DECLINED
debug : do_open:1248 : network driver 2 remote returned SUCCESS
debug : do_open:1264 : interface driver 0 Test returned DECLINED
debug : do_open:1264 : interface driver 1 ESX returned DECLINED
debug : do_open:1264 : interface driver 2 remote returned SUCCESS
debug : do_open:1281 : storage driver 0 Test returned DECLINED
debug : do_open:1281 : storage driver 1 ESX returned DECLINED
debug : do_open:1281 : storage driver 2 remote returned SUCCESS
debug : do_open:1298 : node driver 0 Test returned DECLINED
debug : do_open:1298 : node driver 1 ESX returned DECLINED
debug : do_open:1298 : node driver 2 remote returned SUCCESS
debug : do_open:1315 : secret driver 0 Test returned DECLINED
debug : do_open:1315 : secret driver 1 ESX returned DECLINED
debug : do_open:1315 : secret driver 2 remote returned SUCCESS
debug : do_open:1332 : nwfilter driver 0 Test returned DECLINED
debug : do_open:1332 : nwfilter driver 1 ESX returned DECLINED
debug : do_open:1332 : nwfilter driver 2 remote returned SUCCESS
debug : virConnectRegisterCloseCallback:21344 : conn=0x2aad62a2ef0
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a2ef0
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=1 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=2 timeout=-1
debug : virConnectUnregisterCloseCallback:21400 : conn=0x2aad62a2ef0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2ef0
debug : virConnectClose:1501 : conn=0x2aad62a2ef0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2ef0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a2ef0
debug : virNetMessageNew:44 : msg=0x2aad62a2ac0 tracked=0
debug : virNetMessageEncodePayload:373 : Encode length as 28
debug : virNetClientSendInternal:1952 : RPC_CLIENT_MSG_TX_QUEUE:
client=0x2aad62a3900 len=28 prog=536903814 vers=1 proc=2 type=0 status=0
serial=4
debug : virNetClientCallNew:1905 : New call 0x2aad62a3240:
msg=0x2aad62a2ac0, expectReply=1, nonBlock=0
debug : virNetClientIO:1714 : Outgoing message prog=536903814
version=1 serial=4 proc=2 type=0 length=28 dispatch=(nil)
debug : virNetClientIO:1773 : We have the buck head=0x2aad62a3240
call=0x2aad62a3240
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=0
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 0
debug : virEventPollDispatchHandles:468 : Dispatch 2
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventRunDefaultImpl:270 : running default event implementation
debug : virEventPollCleanupTimeouts:514 : Cleanup 0
debug : virEventPollCleanupTimeouts:550 : Found 0 out of 0 timeout
slots used, releasing 0
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollMakePollFDs:391 : Prepare n=0 w=1, f=5 e=1 d=0
debug : virEventPollMakePollFDs:391 : Prepare n=1 w=3, f=10 e=0 d=0
debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers
debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms
debug : virEventPollRunOnce:627 : EVENT_POLL_RUN: nhandles=1 timeout=-1
debug : virNetMessageDecodeLength:149 : Got length, now need 28 total
(24 more)
debug : virNetClientCallDispatch:1123 : RPC_CLIENT_MSG_RX:
client=0x2aad62a3900 len=28 prog=536903814 vers=1 proc=2 type=1 status=0
serial=4
debug : virKeepAliveCheckMessage:374 : ka=0x2aad62a3ab0,
client=0x2aad62a3900, msg=0x2aad62a3968
debug : virNetMessageClear:55 : msg=0x2aad62a3968 nfds=0
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck
0x2aad62a3240
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE:
watch=3 events=1
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIO:1803 : All done with our call head=(nil)
call=0x2aad62a3240 rv=0
debug : virNetMessageFree:72 : msg=0x2aad62a2ac0 nfds=0 cb=(nil)
debug : virNetClientCloseInternal:687 : client=0x2aad62a3900 wantclose=0
debug : virNetClientMarkClose:633 : client=0x2aad62a3900, reason=3
debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=3
debug : virEventPollRemoveHandle:193 : mark delete 1 10
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virNetClientIOEventLoopPassTheBuck:1420 : Giving up the buck (nil)
debug : virNetClientIOEventLoopPassTheBuck:1434 : No thread to pass
the buck to
debug : virNetClientCloseLocked:646 : client=0x2aad62a3900,
sock=0x2aad62a35c0, reason=3
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a35c0
debug : virObjectRef:293 : OBJECT_REF: obj=0x2aad62a3900
debug : virKeepAliveStop:307 : RPC_KEEPALIVE_STOP: ka=0x2aad62a3ab0
client=0x2aad62a3900
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3ab0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a3ab0
debug : virKeepAliveDispose:227 : RPC_KEEPALIVE_DISPOSE: ka=0x2aad62a3ab0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3900
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3900
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3900
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a37f0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2050
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3bb0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a31d0
debug : virEventPollAddTimeout:225 : Used 0 timeout slots, adding at
least 10 more
debug : virEventPollInterruptLocked:714 : Interrupting
debug : virEventPollAddTimeout:248 : EVENT_POLL_ADD_TIMEOUT: timer=1
frequency=0 cb=0x2aad61b6f9c opaque=(nil) ff=(nil)
debug : virEventPollRunOnce:638 : Poll got 1 event(s)
debug : virEventPollDispatchTimeouts:423 : Dispatch 1
debug : virEventPollDispatchTimeouts:446 :
EVENT_POLL_DISPATCH_TIMEOUT: timer=1
debug : virEventPollDispatchHandles:468 : Dispatch 1
debug : virEventPollDispatchHandles:482 : i=0 w=1
debug : virEventPollDispatchHandles:496 : EVENT_POLL_DISPATCH_HANDLE:
watch=1 events=1
debug : virEventPollCleanupTimeouts:514 : Cleanup 1
debug : virEventPollCleanupHandles:562 : Cleanup 2
debug : virEventPollCleanupHandles:575 : EVENT_POLL_PURGE_HANDLE: watch=3
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3900
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a3900
debug : virNetClientDispose:599 : RPC_CLIENT_DISPOSE: client=0x2aad62a3900
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a31d0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a31d0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a37f0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a37f0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a2050
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a2050
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a3bb0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a3bb0
debug : virFileClose:90 : Closed fd 12
debug : virFileClose:90 : Closed fd 11
debug : virNetMessageClear:55 : msg=0x2aad62a3968 nfds=0
debug : virObjectUnref:256 : OBJECT_UNREF: obj=0x2aad62a35c0
debug : virObjectUnref:258 : OBJECT_DISPOSE: obj=0x2aad62a35c0
debug : virNetSocketDispose:1002 : RPC_SOCKET_DISPOSE: sock=0x2aad62a35c0
debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=3
debug : virFileClose:90 : Closed fd 10
debug : virEventPollRemoveTimeout:300 : EVENT_POLL_REMOVE_TIMEOUT: timer=1
debug : virEventPollInterruptLocked:710 : Skip interrupt, 0 4397868808464
--
Best Regards,
Mars-+
11 years
Re: [libvirt-users] libvirt-users Digest, Vol 45, Issue 28
by Matthias Babisch
Test
libvirt-users-request(a)redhat.com schrieb:
>Send libvirt-users mailing list submissions to
> libvirt-users(a)redhat.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
> https://www.redhat.com/mailman/listinfo/libvirt-users
>or, via email, send a message with subject or body 'help' to
> libvirt-users-request(a)redhat.com
>
>You can reach the person managing the list at
> libvirt-users-owner(a)redhat.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of libvirt-users digest..."
>
>
>Today's Topics:
>
> 1. Finding out CPU topology. (Peeyush Gupta)
> 2. Re: Finding out CPU topology. (Daniel P. Berrange)
> 3. Re: Finding out CPU topology. (Peeyush Gupta)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Tue, 17 Sep 2013 17:41:12 +0800 (SGT)
>From: Peeyush Gupta <gpeeyush(a)ymail.com>
>To: "libvirt-users(a)redhat.com" <libvirt-users(a)redhat.com>
>Subject: [libvirt-users] Finding out CPU topology.
>Message-ID:
> <1379410872.26498.YahooMailNeo(a)web194604.mail.sg3.yahoo.com>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Hi all,
>
>I have been trying to find out cpu topology using libvirt. When
>I do 'virsh capabilites', I find this inside <topology> tag:
>
>
><topology>
>? ? ? <cells num='1'>
>? ? ? ? <cell id='0'>
>? ? ? ? ? <memory unit='KiB'>3908488</memory>
>? ? ? ? ? <cpus num='4'>
>? ? ? ? ? ? <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
>? ? ? ? ? ? <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
>? ? ? ? ? ? <cpu id='2' socket_id='0' core_id='1' siblings='2'/>
>? ? ? ? ? ? <cpu id='3' socket_id='0' core_id='1' siblings='3'/>
>? ? ? ? ? </cpus>
>? ? ? ? </cell>
>? ? ? </cells>
></topology>
>
>But when I use the 'getCapbilities()' function of the python binding,
>the result is:
><topology> ? ?
>? <cells num='1'> ??
>? ? ?<cell id='0'> ? ? ? ??
>? ? ?<cpus num='4'> ??
>? ? ? ?<cpu id='0'/>
>? ? ? ?<cpu id='1'/>
>? ? ? ?<cpu id='2'/>
>? ? ? ?<cpu id='3'/> ? ? ? ??
>? ? ?</cpus> ? ? ? ?
>? ?</cell> ? ? ?
>?</cells> ?
></topology>\n
>
>As you can see this doesnt give any information about
>socket/core/thread etc.
>What I an interested to know is that is it a limitation of python
>binding or libvirt
>C API itself? How can I get the whole topology without just parsing the
>output
>of virsh capabilities?
>
>Thanks.
>~Peeyush Gupta
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><https://www.redhat.com/archives/libvirt-users/attachments/20130917/ff8344...>
>
>------------------------------
>
>Message: 2
>Date: Tue, 17 Sep 2013 10:49:29 +0100
>From: "Daniel P. Berrange" <berrange(a)redhat.com>
>To: Peeyush Gupta <gpeeyush(a)ymail.com>
>Cc: "libvirt-users(a)redhat.com" <libvirt-users(a)redhat.com>
>Subject: Re: [libvirt-users] Finding out CPU topology.
>Message-ID: <20130917094929.GD28204(a)redhat.com>
>Content-Type: text/plain; charset=utf-8
>
>On Tue, Sep 17, 2013 at 05:41:12PM +0800, Peeyush Gupta wrote:
>> Hi all,
>>
>> I have been trying to find out cpu topology using libvirt. When
>> I do 'virsh capabilites', I find this inside <topology> tag:
>>
>>
>> <topology>
>> ? ? ? <cells num='1'>
>> ? ? ? ? <cell id='0'>
>> ? ? ? ? ? <memory unit='KiB'>3908488</memory>
>> ? ? ? ? ? <cpus num='4'>
>> ? ? ? ? ? ? <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
>> ? ? ? ? ? ? <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
>> ? ? ? ? ? ? <cpu id='2' socket_id='0' core_id='1' siblings='2'/>
>> ? ? ? ? ? ? <cpu id='3' socket_id='0' core_id='1' siblings='3'/>
>> ? ? ? ? ? </cpus>
>> ? ? ? ? </cell>
>> ? ? ? </cells>
>> </topology>
>>
>> But when I use the 'getCapbilities()' function of the python binding,
>> the result is:
>> <topology> ? ?
>> ? <cells num='1'> ??
>> ? ? ?<cell id='0'> ? ? ? ??
>> ? ? ?<cpus num='4'> ??
>> ? ? ? ?<cpu id='0'/>
>> ? ? ? ?<cpu id='1'/>
>> ? ? ? ?<cpu id='2'/>
>> ? ? ? ?<cpu id='3'/> ? ? ? ??
>> ? ? ?</cpus> ? ? ? ?
>> ? ?</cell> ? ? ?
>> ?</cells> ?
>> </topology>\n
>>
>> As you can see this doesnt give any information about
>socket/core/thread etc.
>> What I an interested to know is that is it a limitation of python
>binding or libvirt
>> C API itself? How can I get the whole topology without just parsing
>the output
>> of virsh capabilities?
>
>Did you really run these two examples on the same machine, with the
>same
>libvirt URI ? Both virsh and the python binding call the same libvirt
>API
>'virConnectGetCapabilities' so will return the same data if run against
>the same libvirt. The socket_id, core_id and siblings data is a
>relatively
>new feature we added, so older libvirt won't show it.
>
>Daniel
>--
>|: http://berrange.com -o-
>http://www.flickr.com/photos/dberrange/ :|
>|: http://libvirt.org -o-
>http://virt-manager.org :|
>|: http://autobuild.org -o-
>http://search.cpan.org/~danberr/ :|
>|: http://entangle-photo.org -o-
>http://live.gnome.org/gtk-vnc :|
>
>
>
>------------------------------
>
>Message: 3
>Date: Tue, 17 Sep 2013 17:54:40 +0800 (SGT)
>From: Peeyush Gupta <gpeeyush(a)ymail.com>
>To: "Daniel P. Berrange" <berrange(a)redhat.com>
>Cc: "libvirt-users(a)redhat.com" <libvirt-users(a)redhat.com>
>Subject: Re: [libvirt-users] Finding out CPU topology.
>Message-ID:
> <1379411680.85399.YahooMailNeo(a)web194601.mail.sg3.yahoo.com>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Yes, I have run both of them on same machine. And?I?
>am running libvirt 1.1.0. So, I guess it's not ?a?problem?
>of older version.
>?
>Thanks
>~Peeyush Gupta
>
>
>________________________________
> From: Daniel P. Berrange <berrange(a)redhat.com>
>To: Peeyush Gupta <gpeeyush(a)ymail.com>
>Cc: "libvirt-users(a)redhat.com" <libvirt-users(a)redhat.com>
>Sent: Tuesday, 17 September 2013 3:19 PM
>Subject: Re: [libvirt-users] Finding out CPU topology.
>
>
>On Tue, Sep 17, 2013 at 05:41:12PM +0800, Peeyush Gupta wrote:
>> Hi all,
>>
>> I have been trying to find out cpu topology using libvirt. When
>> I do 'virsh capabilites', I find this inside <topology> tag:
>>
>>
>> <topology>
>> ? ? ? <cells num='1'>
>> ? ? ? ? <cell id='0'>
>> ? ? ? ? ? <memory unit='KiB'>3908488</memory>
>> ? ? ? ? ? <cpus num='4'>
>> ? ? ? ? ? ? <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
>> ? ? ? ? ? ? <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
>> ? ? ? ? ? ? <cpu id='2' socket_id='0' core_id='1' siblings='2'/>
>> ? ? ? ? ? ? <cpu id='3' socket_id='0' core_id='1' siblings='3'/>
>> ? ? ? ? ? </cpus>
>> ? ? ? ? </cell>
>> ? ? ? </cells>
>> </topology>
>>
>> But when I use the 'getCapbilities()' function of the python binding,
>> the result is:
>> <topology> ? ?
>> ? <cells num='1'> ??
>> ? ? ?<cell id='0'> ? ? ? ??
>> ? ? ?<cpus num='4'> ??
>> ? ? ? ?<cpu id='0'/>
>> ? ? ? ?<cpu id='1'/>
>> ? ? ? ?<cpu id='2'/>
>> ? ? ? ?<cpu id='3'/> ? ? ? ??
>> ? ? ?</cpus> ? ? ? ?
>> ? ?</cell> ? ? ?
>> ?</cells> ?
>> </topology>\n
>>
>> As you can see this doesnt give any information about
>socket/core/thread etc.
>> What I an interested to know is that is it a limitation of python
>binding or libvirt
>> C API itself? How can I get the whole topology without just parsing
>the output
>> of virsh capabilities?
>
>Did you really run these two examples on the same machine, with the
>same
>libvirt URI ? Both virsh and the python binding call the same libvirt
>API
>'virConnectGetCapabilities' so will return the same data if run against
>the same libvirt. The socket_id, core_id and siblings data is a
>relatively
>new feature we added, so older libvirt won't show it.
>
>Daniel
>--
>|: http://berrange.com? ? ? -o-? ?
>http://www.flickr.com/photos/dberrange/ :|
>|: http://libvirt.org? ? ? ? ? ? ? -o-? ? ? ? ? ?
>http://virt-manager.org :|
>|: http://autobuild.org? ? ? -o-? ? ? ?
>http://search.cpan.org/~danberr/ :|
>|: http://entangle-photo.org? ? ? -o-? ? ?
>http://live.gnome.org/gtk-vnc :|
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><https://www.redhat.com/archives/libvirt-users/attachments/20130917/df8c7f...>
>
>------------------------------
>
>_______________________________________________
>libvirt-users mailing list
>libvirt-users(a)redhat.com
>https://www.redhat.com/mailman/listinfo/libvirt-users
>
>End of libvirt-users Digest, Vol 45, Issue 28
>*********************************************
--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
11 years
[libvirt-users] Finding out CPU topology.
by Peeyush Gupta
Hi all,
I have been trying to find out cpu topology using libvirt. When
I do 'virsh capabilites', I find this inside <topology> tag:
<topology>
<cells num='1'>
<cell id='0'>
<memory unit='KiB'>3908488</memory>
<cpus num='4'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
<cpu id='2' socket_id='0' core_id='1' siblings='2'/>
<cpu id='3' socket_id='0' core_id='1' siblings='3'/>
</cpus>
</cell>
</cells>
</topology>
But when I use the 'getCapbilities()' function of the python binding,
the result is:
<topology>
<cells num='1'>
<cell id='0'>
<cpus num='4'>
<cpu id='0'/>
<cpu id='1'/>
<cpu id='2'/>
<cpu id='3'/>
</cpus>
</cell>
</cells>
</topology>\n
As you can see this doesnt give any information about socket/core/thread etc.
What I an interested to know is that is it a limitation of python binding or libvirt
C API itself? How can I get the whole topology without just parsing the output
of virsh capabilities?
Thanks.
~Peeyush Gupta
11 years
[libvirt-users] Regarding libvirt usage
by Manzoor Ahamed
Hi Team,
I am using libvirt module to retrieve configuration of the virtual
machines, Can you please tell me how to retrieve the disk space of the
Virtual machines. In my KVM hyper i am running two virtual machines.
Regards
Manzoor
11 years