- Users - libvirt List Archives

[libvirt-users] Upgraded to F18: now machines won't start
by Sean Darcy 30 Oct '13

30 Oct '13

We've gone back to using an older machine that used to run libvirt just fine. Updated to F18, libvirt-1.1.0-1.fc18.x86_64. VirtualBox works ok. Now I can't start any image. For one machine i get: .............. File "/usr/lib64/python2.7/site-packages/libvirt.py", line 698, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error Cannot find suitable CPU model for given data that's whether I use what we used to use "Phenom" or the selection from allowing virt-manager to choose "Opteron G3". For another machine we get: libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/37 (label charserial0) failed to initialize KVM: Device or resource busy Doing some debugging, I found: 1. On boot the kvm_amd and kvm kernel modules won't/don't load. Nothing in dmesg. Modprobe does load them. lsmod | grep kvm kvm_amd 59982 0 kvm 429349 1 kvm_amd I still can't make anything work with the modules loaded. 2. When I start libvirtd, I get: Oct 30 14:56:29 sixcore systemd[1]: Starting Virtualization daemon... Oct 30 14:56:29 sixcore systemd[1]: Started Virtualization daemon. ............ Oct 30 14:56:31 sixcore kernel: [ 837.705913] kvm: enabling virtualization on CPU5 failed Oct 30 14:56:31 sixcore kernel: [ 837.705920] kvm: enabling virtualization on CPU4 failed Oct 30 14:56:31 sixcore kernel: [ 837.705928] kvm: enabling virtualization on CPU1 failed Oct 30 14:56:31 sixcore kernel: [ 837.705934] kvm: enabling virtualization on CPU2 failed Oct 30 14:56:31 sixcore kernel: [ 837.705946] kvm: enabling virtualization on CPU3 failed Oct 30 14:56:31 sixcore kernel: [ 837.745267] kvm: enabling virtualization on CPU0 failed I looked at the wiki on how to debug, and I seem to pass all the tests. virsh capabilities | grep kvm <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> virsh dumpxml 2008R2 | grep kvm <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> Am I right that some of the entries in the xml file have now changed? Is there a guide to updating them from the prior entries? And, if I try to create a new machine, virt-install just hangs: virt-install --prompt What is the name of your virtual machine? New-2008R2 How much RAM should be allocated (in megabytes)? 1200 What would you like to use as the disk (file path)? /opt/storage/virt/windows/images/2008R2.img ls -l /opt/storage/virt/windows/images/2008R2.img -rw-------. 1 root root 23571726336 Dec 8 2012 /opt/storage/virt/windows/images/2008R2.img I changed the permissions to 666. still hung. Any help appreciated. Sean

1 0

[libvirt-users] virsh esx return "error: internal error: Could not find Datacenter"
by Andrea Buzzi (abuzzi) 30 Oct '13

30 Oct '13

Hello, I’m running virsh v1.1.3 compiled on a ubuntu system with the "--with-esx=yes” support. root@kvm-189:/home/cisco# virsh --version 1.1.3 I also have a vcenter 5.5 environment that has following structure (couple of hosts at datacenter level, others part of cluster group): MIC-VC-ADMIN MIC-DC-ADMIN 10.58.6.110 10.58.6.113 MIC-CL-ADMIN 10.58.6.109 10.58.6.118 10.58.6.126 I can succesfully connect to ESXi host 10.58.6.110: root@kvm-189:/home/cisco# virsh -c esx://10.58.6.110?no_verify=1 list --all Enter username for 10.58.6.110 [root]: Enter root's password for 10.58.6.110: Id Name State ---------------------------------------------------- 250 ssi-vepc1 running - SSI-Template shut off root@kvm-189:/home/cisco# However if I try to connect to vcenter, I get the following: root@kvm-189:/home/cisco# virsh -c esx://10.58.6.110?no_verify=1\&vcenter=* Enter username for 10.58.6.110 [root]: Enter root's password for 10.58.6.110: Enter username for 10.58.6.7 [administrator]: Administrator Enter Administrator's password for 10.58.6.7: error: failed to connect to the hypervisor error: internal error: Could not find Datacenter root@kvm-189:/home/cisco# Any suggestion on how to isolate (and possibly fix) the issue ? Thanks, Andrea -- [Description: Description: Description: http://www.cisco.com/swa/i/logo.gif] Andrea Buzzi TME @ MIBU abuzzi(a)cisco.com<mailto:abuzzi@cisco.com> Phone: +39 039.6295.319 Mobile: +39 348.711.9960 Cisco Systems Italy S.r.l Via Torri Bianche, 8 20871 Vimercate (MB) Italy Cisco.com<http://www.cisco.com/global/IT/> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html

1 0

[libvirt-users] A RFE for libvirt
by shyu 30 Oct '13

30 Oct '13

Hi libvirt guys, I am an newbie to libvirt. There is an requirement for libvirt: Every time I want to rename an guest by virsh command, I need to virsh edit origin_guest(edit the name,delete/edit the uuid) after that a new guest with the same configuration as origin_guest was defined, then virsh undefine origin_guest. Seems it's a little complex, so should be there an virsh command like "virsh rename origin_guest new_guest"? I know I can use virt-manager to rename an guest,but if there is an virsh command can do it, I think it's much useful. Thanks -- Regards shyu

2 2

[libvirt-users] Automatically assign static ipv4 via dhcp to new VMs
by Tim 30 Oct '13

30 Oct '13

Hi guys, I'm running a KVM/libvirt host in a datacenter and got a fancy IPv4 subnet from my provider. I'm able to assign IPs from that subnet via dhcp to my VMs: host01 ~ # virsh net-dumpxml internet <network connections='3'> <name>internet</name> <uuid>37b888cc-510f-46f1-9246-346da96222ed</uuid> <forward dev='enp5s0f0' mode='route'> <interface dev='enp5s0f0'/> </forward> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:13:39:d5'/> <ip address='XX.YY.253.2' netmask='255.255.255.224'> <dhcp> <range start='XX.YY.253.4' end='XX.YY.253.30'/> <bootp file='pxelinux.0' server='XX.YY.99.100'/> </dhcp> </ip> </network> What I would like to do: 1) Right know it seems like dnsmasq assigns ip-addresses randomly to VMs, is there any way to assign them in ascending order? 2) IPs are not statically assigned. Is it possible to add something like this automatically at the first VM-start to the xml definition?: <host mac='AA:BB:CC:DD:EE:FF' ip='192.168.122.2' name='foobar'/>

3 3

[libvirt-users] bridged networking using VLAN : guest with 2 NIC
by Dan Sa 30 Oct '13

30 Oct '13

hello all, I have been trying to set-up bridged network with VLAN and not able to succeed as many tutorials address only single NIC. I am trying to setup 2 guests (backtrack instance) each guest has NIC1 and NIC2. following is snippet for guest1 I am not able to get 192.168.0.2 address back on guest eth0. VIRT-MANAGER GUI : guest1-lan details radio button left side panel NIC1 ------------------> Virtual Network Interface Source Device : Virtual Network "default" NAT Device Model : Hypervisor default MAc Address : xxxxxxxxxxxxxx NIC2 ------------------> Virtual Network Interface Source Device : Specify Shared Device Name Bridge name : guest1-lan Device Model : virto MAc Address : xxxxxxxxxxxxxx HOST MACHINE : brctl show has br0 for bridge and virbr0 with 192.168.122.x address (created by default virtual network NAT) /etc/sysconfig/network-scripts/ 1) Bridge BR0 (cat ifcfg-br0) DEVICE="br0" TYPE="Bridge" ONBOOT="yes" NM_CONTROLLED="no" BOOTPROTO="static" IPADDR="xx.xx.xx.xx" NETMASK="255.255.254.0" GATEWAY="xx.xx.xx.xx" DNS1="x.y.z.s" DNS2="x.y.q.s" 2) cat ifcfg-em1 NM_CONTROLLED="yes" HWADDR="02:12D:E2:B1:32" BOOTPROTO="static" DEVICE="em1" BRIDGE="br0" ONBOOT="yes" 3) ifcfg-em2 NM_CONTROLLED="yes" HWADDR="02:24:7e:d0:b1:42" BOOTPROTO="static" DEVICE="em2" ONBOOT="yes" 4) THIS IS GUEST (cat ifcfg-guest1-lan) DEVICE=guest1-lan TYPE=Bridge ONBOOT=yes BOOTPROTO=static DELAY=1 5) GUEST VLAN (cat ifcfg-em2.620) DEVICE=em2.620 VLAN=yes ONBOOT=yes BRIDGE=guest1-lan BRCTL Show Command : br0 8000.00237de0a132 no em1 vnet0 guest1-lan 8000.00237de0a133 no em2.620 virbr0 8000.5254003e19b3 yes virbr0-nic VIRSH : virsh # net-list Name State Autostart ----------------------------------------- guest1-lan active yes default active yes virsh # iface-list Name State MAC Address -------------------------------------------- br0 active 00:23:7d:e0:a1:32 guest1-lan active 00:23:7d:e0:a1:33 iface-edit : virsh # iface-edit guest1-lan <interface type='bridge' name='guest1-lan'> <start mode='onboot'/> <bridge delay='1'> <interface type='vlan' name='em2.620'> <vlan tag='620'> <interface name='em2'/> </vlan> </interface> </bridge> </interface> ------------------------------------------------------------------ /etc/libvirt/qemu/networks cat guest1-lan.xml <network> <name>guest1-lan</name> <uuid>a12747ec-21c9-0d21-ab06-064ba204bc52</uuid> <forward mode='bridge' dev="br0"/> <bridge name='guest1-lan' /> <ip address='192.168.0.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.0.2' end='192.168.0.254' /> </dhcp> </ip> </network> cat default.xml <network> <name>default</name> <uuid>8778244b-1a0c-c15f-c348-26462a07a639</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:3E:19:B3'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> </dhcp> </ip> </network> any guidance will be appriciated regards dan

2 1

[libvirt-users] sr-iov with openvswitch possible?
by Vasiliy Tolstov 30 Oct '13

30 Oct '13

Hi all. I'm try to find answer for my qustion in google, but i can't. if i use openvswitch virtualport in domain and want to use sr-iov does it possible? Or if i use sr-iov traffic not goes to openvswitch? -- Vasiliy Tolstov, e-mail: v.tolstov(a)selfip.ru jabber: vase(a)selfip.ru

2 2

[libvirt-users] Installing tcp/ssh drivers for libvirt
by Shiva Bhanujan 29 Oct '13

29 Oct '13

Hello, Can somebody please point me to documentation regarding installing libvirt and the associated drivers from .rpms? I tried to compile from sources, but not sure where can I get the drivers from. What I get from the ./configure script is the following - configure:71547: Drivers configure:71549: configure:71551: Xen: no configure:71553: QEMU: yes configure:71555: UML: yes configure:71557: OpenVZ: yes configure:71559: VMware: yes configure:71561: VBox: yes configure:71563: XenAPI: no configure:71565: xenlight: no configure:71567: LXC: no configure:71569: PHYP: no configure:71571: ESX: no configure:71573: Hyper-V: no configure:71575: Parallels: no configure:71577: Test: yes configure:71579: Remote: yes configure:71581: Network: yes configure:71583: Libvirtd: yes configure:71585: Interface: no configure:71587: macvtap: no configure:71589: virtport: no If there were a yum repository where I could download the daemon and the drives, that'd be great? Any advice would be appreciated. Regards, Shiva

2 3

[libvirt-users] Unable to provision VM attaching it directly to a OVS bridge
by Lucas Brasilino 29 Oct '13

29 Oct '13

Reposting from virt-tools mailing list: Hi! I'm facing a problem that could be triggered by some lacking of support from libvirt on Open vSwitch (or could be my mistake). I have interests in researching on virtual networks and SDN. To keep things simple, I've decided to use libvirt/virt-tools to manage VM's since my focus is on the network, instead of using a full feature system like OpenStack. I'm quite new with libvirt/virt-tools, but I have a good experience with openvswitch and other virtualizations technologies (which I dropped in libvirt/kvm favor). I'm using Fedora 19 packages openvswitch (1.11.0-1.fc19.x86_64) libvirt (1.0.5.6-3.fc19.x86_64) virt-install (0.10.0-4.fc19.noarch) I've created an OVS bridge (databr0) outside libvirt, and then defined it inside libvirt with: <network> <name>databr0</name> <forward mode='bridge'/> <bridge name='databr0'/> <virtualport type='openvswitch'/> </network> And then 'net-autostart' and 'net-start' it with virsh. Now I've got: # virsh net-list Name State Autostart Persistent ---------------------------------------------------------- databr0 active yes yes When I try to provision an VM, if I use the virt-install option "--network=bridge:databr0,model=virtio,mac=00:00:00:00:00:03" I got the following error: # virt-install --connect qemu:///system --virt-type kvm --name vm2 --ram 768 --disk path=/home/lucas/local/vm/images/vm2.img --vnc --cdrom /home/lucas/local/vm/fc19-x86_64.iso --network=bridge:databr0,model=virtio,mac=00:00:00:00:00:03 --os-type=linux --os-variant fedora19 Starting install... ERROR Unable to add bridge databr0 port vnet0: Operation not supported Domain installation does not appear to have been successful. If it was, you can restart your domain by running: virsh --connect qemu:///system start vm2 otherwise, please restart your installation. I just managed to create a VM when I use '--nonetworks' option and after I do a 'virtsh edit vm2' and add: <interface type='bridge'> <mac address='00:00:00:00:00:03'/> <source bridge='databr0'/> <virtualport type='openvswitch'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </interface> Well, I read elsewhere that openvswitch bridging isn't fully supported. Is it the case or I'm facing another kind of problem ? regards Att Lucas Brasilino MSc Student @ Federal University of Pernambuco (UFPE) twitter: @lucas_brasilino

1 1

[libvirt-users] Is it possible to define serial port speed?
by Marco André Dinis 28 Oct '13

28 Oct '13

Hi I would like to know if it's possible to define serial port speed using libvirt. I'm trying to connect the guest with the host for communication. Usually only small messages are transferred, but i might need to transfer huge files, so i would like to know if i can use SerialPort interface to do that. Thanks anyway, Marco Dinis

2 1

[libvirt-users] how can I use libvirt to connect vbox
by hackxay 28 Oct '13

28 Oct '13

Hi. I want to connect hypervisor vbox using command of "virsh connect vbox:///session". But there is an error occurred: [root@vbox ~]# virsh connect vbox:///session error: Failed to connect to the hypervisor error: internal error unable to initialize VirtualBox driver API And my os is Fedora 19. The VirtualBox is 4.3. Some other info is there: [root@vbox ~]# virsh version Compiled against library: libvirt 1.0.5 Using library: libvirt 1.0.5 Using API: QEMU 1.0.5 Running hypervisor: QEMU 1.4.2 Thanks.

1 0