- Users - libvirt List Archives

Re: [libvirt-users] Virsh snapshots
by Juraj Melo 05 Dec '13

05 Dec '13

Thanks for your answer, I am trying to make a snapshot of whole virtual machine (disk, CPU state, memory). But I need to make this snapshot in matter of seconds. I have already try to create snapshot of disk, which is not problem. I use qcow2 format, and create new disk image using original disk image as backing file. But still I am not able to assign state of vm with new disk. I have found some commands for creating snapshots in libvirt API, so in my opinion one way how to accomplish my task is to create utility using theese commands, and create snapshot of vm in RAM - I hope it would be faster. But I wonder whether virsh contains similar functionality, so I won't need to programm it again. Dne 2.12.2013 19:32, Eric Blake napsal(a): On 12/02/2013 09:04 AM, Juraj Melo wrote: > Hello, > > I am working on my PhD thesis and it would be really helpfull if someone > could advise me, whether can Virsh create snapshots of VMs using > copy-on-write. What are you trying to copy-on-write? Is it just disk state, or VM memory state? Do you have corresponding qemu commands that you are trying to figure out if virsh maps to those same commands? There's a lot of flexibility in the virsh snapshot XML, but not all of it has been wired up yet (in part because it's still a moving target for what upstream qemu supports), so knowing more details about what you are trying to do will help us better answer whether it can be done now and if so with which commands.

3 2

[libvirt-users] libvirt, lvm thin provisioning
by Michael Mol 04 Dec '13

04 Dec '13

I know that lvm supports thin provisioning, and I think I have a pretty good grasp on how that works. Does libvirt support lvm thin provisioning and thin snapshots? I know that in order to set up lvm thin provisioning by hand, I have to create a thin-provisioning pool within the volume group, and then thin-provisioned logical volumes and thin-provisioned snapshots can be created within that thin-provision pool. I also know that it's possible to have more than one thin-provisioning pool within the same volume group, which tells me that in order to properly set up any lvm-aware application to use thin-provisioning, I may need to inform it which thin-provisioning pool it should base LVs and snapshots from. When I look at the example here: http://libvirt.org/storage.html#StorageBackendLogical I don't see anything particular which tells me it supports building off a thin-provisioning pool if I specify such by name. Checking here: http://libvirt.org/formatstorage.html#StoragePool I again don't see anything specific about logical thick vs thin provisioning. I would expect to see *something*, as there are performance consequences when making such choices, so I'm again not sure libvirt recognizes a difference. So is this something that libvirt can do? And is there good documentation somewhere on the subject?

3 5

[libvirt-users] cputune shares with multiple cpu and pinning
by Edoardo Comar 04 Dec '13

04 Dec '13

Hi, I have found the cpu time partitioning based on cpu shares weights not very intuitive. On RHEL64, I deployed two qemu/kvm VMs VM1 with 1 vcpu and 512 cpu shares VM2 with 2 vcpus and 1024 cpu shares I pinned their vcpus to specific host pcpus: VM1 vcpu 0 to host pcpu1 VM2 vcpu 0 to host pcpu1, VM2 vcpu 1 to host pcpu2 I executed inside the VMs a simple process that consume all available cpu, eg # cat /dev/zero > /dev/null on the host, using 'top', the reported cpu usage per qemu process is : with 1 process in VM1 and 1 process on vcpu1 in VM2 VM1 = 100%, VM2=100% explanation - without contention for pcpu2 shares are to be irrelevant (that's ok!) with 1 process in VM1 and 1 process on vcpu0 in VM2 VM1=33%, VM2=66% explanation - with contention on pcpu2, host cpu usage is partitioned according to shares (that's ok!) with 1 process in VM1, and 2 processes in VM2 (one on vcpu0 and on vcpu1 - launched with taskset) VM1=50%, VM2=150% This result was a bit unexpected to me: adding load on VM2 resulted in more cpu time allowed for VM1 - can anyone please explain the logic ? Changing the pinning so that both VMs can use the host pcpuset 1-2 then the CPU usage is 100%/100% when VM2 is executing one task only ( on whatever vcpu ) 50%/150% when VM2 is executing two tasks. again, not intuitive just by looking at the shares weights, I think. -------------------------------------------------- Edoardo Comar WebSphere Application Service Platform for Networks (ASPN) ecomar(a)uk.ibm.com +44 (0)1962 81 5576 IBM UK Ltd, Hursley Park, SO21 2JN Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU

1 0

[libvirt-users] virsh iface-list fail
by Slash Sda 04 Dec '13

04 Dec '13

Hi all, I'm using libvirt 1.1.1 on my ubuntu 13.10 minimal. When I try a virsh iface-list i get this message: error: Failed to list interfaces error: internal error: failed to get number of host interfaces I create a BR0 thru my ETH0. On my virt-manager i don't see the computer interfaces What could it be? Thanks

1 0

[libvirt-users] error: Failed to start domain
by Stefan G. Weichinger 04 Dec '13

04 Dec '13

On a gentoo server with libvirt-1.1.3 I get problems with starting VMs. When I do: # virsh start vm180 error: Failed to start domain vm180 error: Input/output error This happens with 1.1.3 and 1.1.4 (I rebuilt the packages and restarted the libvirtd.service). # journalctl -f -u libvirtd.service shows: Dec 03 17:32:56 jupiter libvirtd[24020]: Input/output error Dec 03 17:33:47 jupiter libvirtd[24020]: Input/output error The log for the specific VM shows: 2013-12-03 16:33:47.004+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -name vm180 -S -machine pc-i440fx-1.5,accel=kvm,usb=off -cpu Opteron_G5,+bmi1,+perfctr_nb,+perfctr_core,+topoext,+nodeid_msr,+tce,+lwp,+wdt,+skinit,+ibs,+osvw,+cr8legacy,+extapic,+cmp_legacy,+fxsr_opt,+mmxext,+osxsave,+monitor,+ht,+vme -m 3954 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -uuid 646f757f-2ab7-4fdf-2140-a79396200c6f -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/vm180.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime,clock=vm,driftfix=slew -no-kvm-pit-reinjection -no-hpet -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/dev/VG01/vm180_disk0,if=none,id=drive-virtio-disk0,format=raw,cache=none,aio=threads -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive file=/mnt/tests/grml64-full_2013.02.iso,if=none,id=drive-ide0-1-0,readonly=on,format=raw -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=27,id=hostnet0,vhost=on,vhostfd=28 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:8d:3b:af,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:5 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 2013-12-03 16:33:47.013+0000: shutting down libvirt: error : libvirtd quit during handshake: Input/output error What can I do about this issue? Thanks for any pointers, Stefan

1 2

[libvirt-users] help about migration with libvirt
by lei yang 04 Dec '13

04 Dec '13

Hi experts I want to use libvirt doing the migration migration the guest from core 0 to core 2, Is there a way to do this ? any points? Lei

3 4

[libvirt-users] layer2 tunnel between guests across hosts
by sujay g 03 Dec '13

03 Dec '13

Hi, Is it possible to setup layer2 tunnels between guests across hosts? Using vrbr? -- i.e the Guest is unaware. On Host 1: guest (a) --- vrbr0 ------- | | On Host 2: | guest(b) -- vrbr0 ------ Has there been any work done around it? TIA, -Sujay

2 1

[libvirt-users] run libvirt API on arm hardware platform
by 林佳緯 03 Dec '13

03 Dec '13

Hi all, Is it possible to run libvirt API on arm hardware platform? (i,e. armv7) Or any work done to work around it? Thanks Gavin

3 2

[libvirt-users] Problem booting guest with more than 8 disks
by Jon 03 Dec '13

03 Dec '13

Hello All, On my host machine, I'm using kvm, libvirt, ceph and ubuntu versions as follows: >> QEMU emulator version 1.5.0 (Debian 1.5.0+dfsg-3ubuntu5), Copyright (c) 2003-2008 Fabrice Bellard >> root@kitt:~# virsh --version: 1.1.1 >> ceph version 0.67.4 (ad85b8bfafea6232d64cb7ba76a8b6e8252fa0c7) >> VERSION="13.10, Saucy Salamander" >> Linux kitt 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux I'm encountering an issue when attempting to boot a VM with more than eight disks, the boot disk is not found and the vm fails to boot with an error "No bootable device". This happens with Archlinux, Ubuntu. and Fedora images. I'm working on a tool [1] to build virtual machines, it creates rbd images named $hostname-os and $hostname-storageX (where X is the "additional disk number" starting at 0, a vm with seven disks would have one named -os and six named -storage{0..5})--the os disk is a clone of a protected COW RBD snapshot--the the tool defines the xml and uses Sys::Virt to define and boot the virtual machine. All os types use grub, ubuntu and fedora use an mbr and arch uses gpt, I'm not certain that matters as vms with less than six disks boot no problem. I've included both my generated and dumped xml for both my booting and non booting vms. The only consistent difference between the vm deployments is the addition on $hostname-storage6. Is there perhaps a way to specify which hd is the boot device? I appreciate any assistance. Thanks, Jon A [1] https://github.com/three18ti/Build-VM non Booting VM: ######################################################### # Generated: | <domain type='kvm'> | <name>arch_test2</name> | <memory unit='KiB'>4194304</memory> | <currentMemory unit='KiB'>4194304</currentMemory> | <vcpu placement='static'>2</vcpu> | <os> | <type arch='x86_64' machine='pc-i440fx-1.4'>hvm</type> | <boot dev='hd'/> | <bootmenu enable='no'/> | </os> | <features> | <acpi/> | <apic/> | <pae/> | </features> | <clock offset='utc'/> | <on_poweroff>destroy</on_poweroff> | <on_reboot>restart</on_reboot> | <on_crash>restart</on_crash> | <devices> | <emulator>/usr/bin/kvm</emulator> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-os'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vda' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage0'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdb' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage1'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdc' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage2'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdd' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage3'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vde' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage4'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdf' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage5'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdg' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage6'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdh' bus='virtio' /> | </disk> | <interface type='bridge'> | <source bridge='ovsbr0'/> | <virtualport type='openvswitch'> | </virtualport> | <model type='virtio'/> | </interface> | | <controller type='usb' index='0'> | </controller> | <controller type='ide' index='0'> | </controller> | <controller type='virtio-serial' index='0'> | </controller> | <serial type='pty'> | <target port='0'/> | </serial> | <console type='pty'> | <target type='serial' port='0'/> | </console> | <input type='mouse' bus='ps2'/> | <graphics type='vnc' port='-1' autoport='yes'/> | <sound model='ich6'> | </sound> | | <video> | <model type='cirrus' vram='9216' heads='1'/> | </video> | | <memballoon model='virtio'> | </memballoon> | | </devices> | </domain> ##### ------------------------------------------------------------------------------------------------------------- ##### # Dumped | <domain type='kvm' id='171'> | <name>arch_test2</name> | <uuid>fcff77f4-0a93-43f9-bf3a-e5863b787400</uuid> | <memory unit='KiB'>4194304</memory> | <currentMemory unit='KiB'>4194304</currentMemory> | <vcpu placement='static'>2</vcpu> | <resource> | <partition>/machine</partition> | </resource> | <os> | <type arch='x86_64' machine='pc-i440fx-1.4'>hvm</type> | <boot dev='hd'/> | <bootmenu enable='no'/> | </os> | <features> | <acpi/> | <apic/> | <pae/> | </features> | <clock offset='utc'/> | <on_poweroff>destroy</on_poweroff> | <on_reboot>restart</on_reboot> | <on_crash>restart</on_crash> | <devices> | <emulator>/usr/bin/kvm</emulator> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-os'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vda' bus='virtio'/> | <alias name='virtio-disk0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage0'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdb' bus='virtio'/> | <alias name='virtio-disk1'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage1'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdc' bus='virtio'/> | <alias name='virtio-disk2'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage2'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdd' bus='virtio'/> | <alias name='virtio-disk3'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage3'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vde' bus='virtio'/> | <alias name='virtio-disk4'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage4'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdf' bus='virtio'/> | <alias name='virtio-disk5'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage5'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdg' bus='virtio'/> | <alias name='virtio-disk6'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test2-storage6'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdh' bus='virtio'/> | <alias name='virtio-disk7'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/> | </disk> | <controller type='usb' index='0'> | <alias name='usb0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> | </controller> | <controller type='ide' index='0'> | <alias name='ide0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> | </controller> | <controller type='virtio-serial' index='0'> | <alias name='virtio-serial0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> | </controller> | <controller type='pci' index='0' model='pci-root'> | <alias name='pci0'/> | </controller> | <interface type='bridge'> | <mac address='52:54:00:c2:64:72'/> | <source bridge='ovsbr0'/> | <virtualport type='openvswitch'> | <parameters interfaceid='51324f0c-e98f-419e-aa82-ef9942c27eea'/> | </virtualport> | <target dev='vnet4'/> | <model type='virtio'/> | <alias name='net0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | </interface> | <serial type='pty'> | <source path='/dev/pts/13'/> | <target port='0'/> | <alias name='serial0'/> | </serial> | <console type='pty' tty='/dev/pts/13'> | <source path='/dev/pts/13'/> | <target type='serial' port='0'/> | <alias name='serial0'/> | </console> | <input type='mouse' bus='ps2'/> | <graphics type='vnc' port='5904' autoport='yes' listen='127.0.0.1'> | <listen type='address' address='127.0.0.1'/> | </graphics> | <sound model='ich6'> | <alias name='sound0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | </sound> | <video> | <model type='cirrus' vram='9216' heads='1'/> | <alias name='video0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> | </video> | <memballoon model='virtio'> | <alias name='balloon0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' function='0x0'/> | </memballoon> | </devices> | <seclabel type='dynamic' model='apparmor' relabel='yes'> | <label>libvirt-fcff77f4-0a93-43f9-bf3a-e5863b787400</label> | <imagelabel>libvirt-fcff77f4-0a93-43f9-bf3a-e5863b787400</imagelabel> | </seclabel> | </domain> -------------------------------------------------------------------------------------------------------------- ############################################################### ############################################################### # Booting VM: # Generated: | <domain type='kvm'> | <name>arch_test</name> | <memory unit='KiB'>4194304</memory> | <currentMemory unit='KiB'>4194304</currentMemory> | <vcpu placement='static'>2</vcpu> | <os> | <type arch='x86_64' machine='pc-i440fx-1.4'>hvm</type> | <boot dev='hd'/> | <bootmenu enable='no'/> | </os> | <features> | <acpi/> | <apic/> | <pae/> | </features> | <clock offset='utc'/> | <on_poweroff>destroy</on_poweroff> | <on_reboot>restart</on_reboot> | <on_crash>restart</on_crash> | <devices> | <emulator>/usr/bin/kvm</emulator> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-os'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vda' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage0'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdb' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage1'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdc' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage2'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdd' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage3'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vde' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage4'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdf' bus='virtio' /> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage5'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdg' bus='virtio' /> | </disk> | <interface type='bridge'> | <source bridge='ovsbr0'/> | <virtualport type='openvswitch'> | </virtualport> | <model type='virtio'/> | </interface> | | <controller type='usb' index='0'> | </controller> | <controller type='ide' index='0'> | </controller> | <controller type='virtio-serial' index='0'> | </controller> | <serial type='pty'> | <target port='0'/> | </serial> | <console type='pty'> | <target type='serial' port='0'/> | </console> | <input type='mouse' bus='ps2'/> | <graphics type='vnc' port='-1' autoport='yes'/> | <sound model='ich6'> | </sound> | | <video> | <model type='cirrus' vram='9216' heads='1'/> | </video> | | <memballoon model='virtio'> | </memballoon> | | </devices> | </domain> ##### ---------------------------------------------------------------------------------------------------------------- ##### | <domain type='kvm' id='169'> | <name>arch_test</name> | <uuid>7c3b44dc-ff91-413a-b1cf-dfbe2480d44e</uuid> | <memory unit='KiB'>4194304</memory> | <currentMemory unit='KiB'>4194304</currentMemory> | <vcpu placement='static'>2</vcpu> | <resource> | <partition>/machine</partition> | </resource> | <os> | <type arch='x86_64' machine='pc-i440fx-1.4'>hvm</type> | <boot dev='hd'/> | <bootmenu enable='no'/> | </os> | <features> | <acpi/> | <apic/> | <pae/> | </features> | <clock offset='utc'/> | <on_poweroff>destroy</on_poweroff> | <on_reboot>restart</on_reboot> | <on_crash>restart</on_crash> | <devices> | <emulator>/usr/bin/kvm</emulator> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-os'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vda' bus='virtio'/> | <alias name='virtio-disk0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage0'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdb' bus='virtio'/> | <alias name='virtio-disk1'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage1'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdc' bus='virtio'/> | <alias name='virtio-disk2'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage2'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdd' bus='virtio'/> | <alias name='virtio-disk3'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage3'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vde' bus='virtio'/> | <alias name='virtio-disk4'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage4'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdf' bus='virtio'/> | <alias name='virtio-disk5'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> | </disk> | <disk type='network' device='disk'> | <driver name='qemu'/> | <source protocol='rbd' name='libvirt-pool/arch_test-storage5'> | <host name='192.168.0.35' port='6789'/> | <host name='192.168.0.2' port='6789'/> | <host name='192.168.0.40' port='6789'/> | </source> | <target dev='vdg' bus='virtio'/> | <alias name='virtio-disk6'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> | </disk> | <controller type='usb' index='0'> | <alias name='usb0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> | </controller> | <controller type='ide' index='0'> | <alias name='ide0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> | </controller> | <controller type='virtio-serial' index='0'> | <alias name='virtio-serial0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> | </controller> | <controller type='pci' index='0' model='pci-root'> | <alias name='pci0'/> | </controller> | <interface type='bridge'> | <mac address='52:54:00:d0:da:73'/> | <source bridge='ovsbr0'/> | <virtualport type='openvswitch'> | <parameters interfaceid='f1c41c6e-8ca0-4c34-b1df-053c9a7976bb'/> | </virtualport> | <target dev='vnet2'/> | <model type='virtio'/> | <alias name='net0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | </interface> | <serial type='pty'> | <source path='/dev/pts/4'/> | <target port='0'/> | <alias name='serial0'/> | </serial> | <console type='pty' tty='/dev/pts/4'> | <source path='/dev/pts/4'/> | <target type='serial' port='0'/> | <alias name='serial0'/> | </console> | <input type='mouse' bus='ps2'/> | <graphics type='vnc' port='5902' autoport='yes' listen='127.0.0.1'> | <listen type='address' address='127.0.0.1'/> | </graphics> | <sound model='ich6'> | <alias name='sound0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | </sound> | <video> | <model type='cirrus' vram='9216' heads='1'/> | <alias name='video0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> | </video> | <memballoon model='virtio'> | <alias name='balloon0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/> | </memballoon> | </devices> | <seclabel type='dynamic' model='apparmor' relabel='yes'> | <label>libvirt-7c3b44dc-ff91-413a-b1cf-dfbe2480d44e</label> | <imagelabel>libvirt-7c3b44dc-ff91-413a-b1cf-dfbe2480d44e</imagelabel> | </seclabel> | </domain>

1 0

[libvirt-users] virsh detach typo
by Mauricio Tavares 03 Dec '13

03 Dec '13

[root@vmhost vms]# virsh detach-disk puppet vdb error: No found disk whose source path or target is vdb [root@vmhost vms]# virsh --version 0.10.2 [root@vmhost vms]# This probably was solved already but if not, "No found disk" probably sounds better if it was "No disk found"

2 1