- Users - libvirt List Archives

Re: [libvirt-users] 答复: libvirtd can't start
by Martin Kletzander 27 Mar '15

27 Mar '15

On Thu, Mar 26, 2015 at 02:55:04PM +0800, 梅磊 wrote: >Thanks for your reply, Martin, I have read the coredump, but I am not familiar with libvirt, so could you help me to figure it out why it crash? >Attachment is the coredump gdb output and all the generate files when libvirtd stop. > I forgot to ask you to install debuginfo packages to further investigate. But looking at the log only netcf-debuginfo is needed. Could you install it and then run the "t a a bt f" again, please? From the current logs I can only guess that there is some network XML mangled and netcf can't read it. When you're power went out, as you said, is it possible you were updating something in the meantime? Try running "rpm -Va" to see if there's something broken in the system. >And Do you think this issue is the same issue with the below root cause? >https://bugzilla.redhat.com/show_bug.cgi?id=1179981 > It is not, that is caused by something else. > > > >-Best Regards, >Andy > > >-----邮件原件----- >发件人: Martin Kletzander [mailto:mkletzan@redhat.com] >发送时间: 24 March 2015 21:20 >收件人: 梅磊 >抄送: libvirt-users(a)redhat.com >主题: Re: [libvirt-users] libvirtd can't start > >On Tue, Mar 24, 2015 at 04:29:07PM +0800, 梅磊 wrote: >>Hi experts, >> The libvirtd can’t start on my server after the server interruption of >>power supply, the status is below: >> >>[root@openstack3 libvirt]# service libvirtd status Redirecting to >>/bin/systemctl status libvirtd.service libvirtd.service - >>Virtualization daemon >> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled) >> Active: failed (Result: signal) since Tue 2015-03-24 16:10:31 CST; >>7min ago >> Process: 27372 ExecStart=/usr/sbin/libvirtd $LIBVIRTD_ARGS >>(code=killed, >>signal=SEGV) >> Main PID: 27372 (code=killed, signal=SEGV) >> >>Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: >>27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 >>openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: >>27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 >>openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: >>27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 >>openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: >>27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 >>openstack3 libvirtd[27372]: 2015-03-24 08:10:31.413+0000: >>27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 >>openstack3 libvirtd[27372]: 2015-03-24 08:10:31.413+0000: >>27383: debug : virStateInitialize:847 : Running global init for netcf >>state driver Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 >>08:10:31.413+0000: >>27383: debug : virObjectNew:199 : OBJECT_NEW: obj=0x7f73f0080d00 >>classname=virNetcfDriverState Mar 24 16:10:31 openstack3 >>libvirtd[27372]: ====== end of log ===== Mar 24 16:10:31 openstack3 >>systemd[1]: libvirtd.service: main process exited, code=killed, >>status=11/SEGV Mar 24 16:10:31 openstack3 systemd[1]: Unit >>libvirtd.service entered failed state. >> >>And the attachment is the log after restart the libvirtd. >> >>After long time search on google, I didn’t get any useful information, >>so anyone can give me some hint on this issue? >> > >What did you search for? > >According to the log: >abrt-hook-ccpp: Saved core dump of pid 28928 (/usr/sbin/libvirtd) to >/var/tmp/abrt/ccpp-2015-03-24-16:19:22-28928 (97218560 bytes) > >libvirtd has segfaulted and you have the coredump. Use gdb to open >it: ># gdb -c /var/tmp/abrt/ccpp-2015-03-24-16:19:22-28928 > >and then look at what happened, if you can't make anything of it, post it as an attachment here or create a bug from it: > >(gdb) bt >(gdb) t a a bt full > >>-BR, >>Andy >> > > >>_______________________________________________ >>libvirt-users mailing list >>libvirt-users(a)redhat.com >>https://www.redhat.com/mailman/listinfo/libvirt-users

3 4

[libvirt-users] Channel Device virConnectListAllNodeDevices
by Neel Basu 27 Mar '15

27 Mar '15

Hello, I've added a Channel Device through virt-manager GUI. virsh dumpxml shows the device as. <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/ubuntusaucy.marx'/> <target type='virtio' name='marx'/> <alias name='channel2'/> <address type='virtio-serial' controller='0' bus='0' port='3'/> </channel> I am expecting virConnectListAllNodeDevices to have the device in its output. But I don't see it there. Is it the right function to call ? virNodeDevicePtr* devices; int dev_count = virConnectListAllNodeDevices(conn, &devices, 0); std::cout << "Devices: " << dev_count << std::endl; for(virNodeDevicePtr* device = devices; device < devices+dev_count; ++device){ std::cout << virNodeDeviceGetName(*device) << std::endl; } returns 66 devices but once I loop through devices I don't get any corresponding name for the channel device. Tried using virConnectListAllNodeDevices(conn, &devices, VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS); returns 0 devices. Thanks.

1 1

[libvirt-users] Installation of libvirt on Ubuntu
by WANG Cheng D 27 Mar '15

27 Mar '15

Dear all, I wonder if libvirt can work on Ubuntu. As you know, it is very convenient to install libvirt on Fedora. I can download the libvirt packet from libvirt.org and install it using command ./configure, make and make install. As I am going to install an open source simulation system named openairinterface, Ubuntu is the recommended OS, and I want to install the simulation system in libvirt lxc. (as you may know, there is another lxc user space tool on Ubuntu whose official website is "https://linuxcontainers.org", which I don't want to use). My questions are: 1) Can I install libvirt on Ubuntu with the same installation steps as on Fedora (i.e., manually download the tar.gz packet and install it locally)? I found a link talking about installation libvirt on Ubuntu which installs something like "libvirt-bin" (https://help.ubuntu.com/lts/serverguide/libvirt.html) I am not sure if libvirt can be installed following this instruction? 2) How can I create the rootfs for a Ubuntu container if libvirt can be installed on Ubuntu? I create the rootfs for Fedora container using: # yum --installroot=/root/fedora16linux container --releasever=19 install -y openssh, bridge-utils". How can I achieve this on Ubuntu? 3) If libvirt can work on Ubuntu, Can a disk file on the host OS be exposed to a Ubuntu container just like on Fedora? With my warmest regards, Cheng Wang

2 2

Re: [libvirt-users] pty pairing host - guest
by Neel Basu 27 Mar '15

27 Mar '15

Getting no output on /dev/hvcNN On Thu, Mar 19, 2015 at 3:15 PM, Daniel P. Berrange <berrange(a)redhat.com> wrote: > On Thu, Mar 19, 2015 at 01:29:37PM +0530, Neel Basu wrote: > > HI!, > > > > I am using virt-manager GUI. There I can add a `Console Device` through > > Add Hardware. I can add a virtio pty WITHOUT restarting the VM. also I > get > > a pty allocated to host machine say `/dev/pty/M` > > > > My expectation is this `host:/dev/pty/M` is connected with a > > `guest:/dev/ttyN`. so If I open minicom or screen and write to > > `host:/dev/pty/M` it will be propagated to 'guest:/dev/ttyN'. Is my > > expectation correct ? > > > > If it is correct how will I know what is the guest tty allocated against > > this host pty ? > > No, that's not how it works. The <console> devices are exposed to > the guest as /dev/hvcNN devices. Starting with NN==0 > > as per the dumpxml output <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> I expected host:/dev/pts/1 is paired with guest:/dev/hvc0 So I tried to communicate with minicom,echo,cat with these two but I saw no output. what I echo on /dev/pts/1 doesn't pass to /dev/hvc0 or vice verse. > > > Similar to console device I can add a Serial device but that requires a > > reboot of the guest VM. However I tried that though I prefer to do it > > without a guest restart. > > > > <serial type='pty'> > > <source path='/dev/pts/1'/> > > <target port='0'/> > > <alias name='serial0'/> > > </serial> > > > > here also I expected host:/dev/pts/1 is paired with /dev/ttyS0 but > couldn't > > communicate. > > The serial port device supported is a 1990 era ISA bus serial port > so there's no hotplug for that. Only the paravirt consoles can be > hotplugged. > > Regards, > Daniel > -- > |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ > :| > |: http://libvirt.org -o- http://virt-manager.org > :| > |: http://autobuild.org -o- http://search.cpan.org/~danberr/ > :| > |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc > :| >

1 0

[libvirt-users] virConnectListAllNodeDevices requires number of devices to be known
by Neel Basu 27 Mar '15

27 Mar '15

Hi, virConnectListAllNodeDevices() takes a virNodeDevicePtr **devices. So I need to create an array of virNodeDevicePtr. For that I need to know size / Number of devices. What is the function for that ? Thank You.

2 1

Re: [libvirt-users] no luck with filesystem storage type [solved]
by Boylan, Ross 27 Mar '15

27 Mar '15

I needed one more option to make it work: # mount -t 9p /mnt/SASInstaller /mnt/SASInstaller/ mount: wrong fs type, bad option, bad superblock on /mnt/SASInstaller, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # mount -t 9p -o trans=virtio /mnt/SASInstaller /mnt/SASInstaller The page you referenced also mentions using -oversion=9p2000.L. There is some additional info on the versions at http://landley.net/kdocs/Documentation/filesystems/9p.txt; that page says .L is the default, while http://wiki.qemu.org/Documentation/9psetup#Starting_the_Guest_using_libvirt says it's .U. I don't know how to tell which I ended up with. Thanks for the pointer. Ross ________________________________________ From: Ján Tomko [jtomko(a)redhat.com] Sent: Thursday, March 26, 2015 1:43 AM To: Boylan, Ross Cc: libvirt-users(a)redhat.com Subject: Re: [libvirt-users] no luck with filesystem storage type On Thu, Mar 26, 2015 at 01:37:06AM +0000, Boylan, Ross wrote: > I have a directory on the host that I would like to be visible in the guest/domain. Using virt-manager I selected the directory, resulting in this configuration: > <filesystem type='mount' accessmode='passthrough'> > <source dir='/mnt/SASInstaller'/> > <target dir='/mnt/SASInstaller'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> > </filesystem> > I created the /mnt/SASInstaller manually in the VM. > > Nothing shows up. What am I missing? Do I need to run something in the VM (running Linux) to make it work? You need to mount it: mount -t 9p /mnt/SASInstaller /mnt/SASInstaller The target 'dir' is not really a directory, it's just a mount tag. See: http://wiki.qemu.org/Documentation/9psetup#Starting_the_Guest_using_libvirt Jan

1 0

[libvirt-users] no luck with filesystem storage type
by Boylan, Ross 26 Mar '15

26 Mar '15

I have a directory on the host that I would like to be visible in the guest/domain. Using virt-manager I selected the directory, resulting in this configuration: <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/SASInstaller'/> <target dir='/mnt/SASInstaller'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </filesystem> I created the /mnt/SASInstaller manually in the VM. Nothing shows up. What am I missing? Do I need to run something in the VM (running Linux) to make it work? Thanks. Ross Boylan

2 1

[libvirt-users] libvirtd can't start
by 梅磊 26 Mar '15

26 Mar '15

Hi experts, The libvirtd can’t start on my server after the server interruption of power supply, the status is below: [root@openstack3 libvirt]# service libvirtd status Redirecting to /bin/systemctl status libvirtd.service libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled) Active: failed (Result: signal) since Tue 2015-03-24 16:10:31 CST; 7min ago Process: 27372 ExecStart=/usr/sbin/libvirtd $LIBVIRTD_ARGS (code=killed, signal=SEGV) Main PID: 27372 (code=killed, signal=SEGV) Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: 27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: 27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: 27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.412+0000: 27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.413+0000: 27383: debug : virFileClose:90 : Closed fd 22 Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.413+0000: 27383: debug : virStateInitialize:847 : Running global init for netcf state driver Mar 24 16:10:31 openstack3 libvirtd[27372]: 2015-03-24 08:10:31.413+0000: 27383: debug : virObjectNew:199 : OBJECT_NEW: obj=0x7f73f0080d00 classname=virNetcfDriverState Mar 24 16:10:31 openstack3 libvirtd[27372]: ====== end of log ===== Mar 24 16:10:31 openstack3 systemd[1]: libvirtd.service: main process exited, code=killed, status=11/SEGV Mar 24 16:10:31 openstack3 systemd[1]: Unit libvirtd.service entered failed state. And the attachment is the log after restart the libvirtd. After long time search on google, I didn’t get any useful information, so anyone can give me some hint on this issue? -BR, Andy

3 3

[libvirt-users] machine='pc-q35-2.1' and sata controller
by Thomas Stein 26 Mar '15

26 Mar '15

Hello. I'm not able to disable the sata controller on a machine='pc-q35-2.1' type VM. Whenever i delete: <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> it gets added again when i close the editor. The reason i would like to delete the sata controller is this error while trying to migrate the machine: 2015-02-23 19:04:11.181+0000: 1972: error : qemuMonitorJSONCheckError:381 : internal error: unable to execute QEMU command 'migrate': State blocked by non-migratable device '0000:00:1f.2/ich9_ahci' Someone has an idea to solve this? thanks and cheers t.

4 9

[libvirt-users] Listing on Host sFlow under Applications>Monitoring
by Peter Phaal 26 Mar '15

26 Mar '15

Would it be possible to list the Host sFlow project in the Monitoring section of http://libvirt.org/apps.html? Host sFlow <http://host-sflow.sourceforge.net/> Host sFlow is a light weight agent running on KVM hypervisors that links to libvirt library and exports standardized cpu, memory, network and disk metrics for all virtual machines using sFlow protocol. Thanks, Peter

2 2

[libvirt-users] virsh dom state
by Fiorenza Meini 25 Mar '15

25 Mar '15

Hi there, I'm running KVM under Openstack . When I give virsh list command, I see some VM in NON persistent state. What does it mean? How can I move it to a persisten state ? I found that I cannot make a snapshot, from Openstack , of a machine which is in a NON PERSISTENT state. Regards Fiorenza -- Spazio Web S.r.l. V. Dante, 10 13900 Biella Tel.: +39 015 2431982 Fax.: +39 015 2522600 Numero d'Iscrizione al Registro Imprese presso CCIAA Biella, Cod.Fisc.e P.Iva: 02414430021 Iscriz. REA: BI - 188936 Cap. Soc.: €. 30.000 i.v.

6 5

[libvirt-users] java binding in central maven repository
by Laszlo Hornyak 24 Mar '15

24 Mar '15

Hi, The last libvirt artifact published to the maven central repository was 0.4.7 in 2011. The libvirt.org/maven2 repository is updated, but - sometimes the libvirt.org webserver is not responding and that breaks the build. - for similar reasons projects depending on other maven repositories can not upload to central repository Can we get back updates to maven central repo? Best regards, Laszlo -- EOF

1 0

Re: [libvirt-users] getting oriented/networking [some success]
by Boylan, Ross 24 Mar '15

24 Mar '15

I seem to have run into https://bugzilla.redhat.com/show_bug.cgi?id=855640, because when I tried the fix/work-around at the end (comment 11), ethtool -K eth0 gro off, my download speed by speedtest went from undetectable to ~150Mb/s. However, it was not able to connect for the upload test, and so something may still be off. Non-virtual machines can do the upload test, so it's not just a firewall issue. The comment refers to another source for more info, but it seems to be behind a Redhat paywall. Ross ________________________________________ From: Boylan, Ross Sent: Friday, March 20, 2015 11:01 AM To: Dominique Ramaekers; libvirt-users(a)redhat.com Subject: RE: [libvirt-users] getting oriented/networking Thanks very much. Unfortunately, networking is currently so slow as to be non-functional (most operations time out). It's also erratic: I had 2 VM that were close to identical--they were both based on the same disk image--and even when I set the networking the same one was fine and one was very slow. Today I started up the VM that had good networking, and it now has bad networking. Here's one of the network specifications: <interface type='direct'> <mac address='52:54:00:61:7c:dc'/> <source dev='eth1' mode='vepa'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> The one that was originally fast also had a NAT network, and the one that was originally slow was mode bridge before I changed it to vepa, which didn't help. The drivers came from http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/virtio-win-0.… in the 32 bit windows 7 directory of the iso (host is 64 bit, as is the emulated machine; Windows 7 is 32 bit). I've tried shutting down, removing and reinstalling the network adaptor, and various other things. Ross ________________________________________ From: Dominique Ramaekers [dominique.ramaekers(a)cometal.be] Sent: Thursday, March 19, 2015 11:21 PM To: Boylan, Ross; libvirt-users(a)redhat.com Subject: RE: [libvirt-users] getting oriented/networking Dear Boyland, In collaboration with some of this mailing list users, I had put some effort in optimising the guest settings in function of a windows guest. The libvirt-gui doesn't include these options. You'll have to edit the XML in virsh. This was my conclusion on 15-03-2015 but I added the hugepages tip in this list today. As for networking, I only use or bridged or the default virtual network (NAT), so can't help you more here. Here below, a summary of tips: - Setting video to QXL and the display channel to Spice <video> <model type='qxl' ram='65536' vram='65536' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <channel type='spicevmc'> <target type='virtio' name='com.redhat.spice.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> - Using HyperV enlightenemt timer <features> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> </hyperv> <features/> <clock ...> <timer name='hypervclock' present='yes'/> </clock> - Delete the tablet entry in the input section or set the USB-bus to USB2 or USB3 - Use hugepages <memoryBacking> <hugepages/> </memoryBacking> Again thanks Daniel and Andrey. Hope this helps. Grts, Dominique. -----Oorspronkelijk bericht----- Van: Boylan, Ross [mailto:Ross.Boylan@ucsf.edu] Verzonden: vrijdag 20 maart 2015 1:52 Aan: libvirt-users(a)redhat.com Onderwerp: [libvirt-users] getting oriented/networking I've been using virt-manager and kvm with a disk image (as in the raw bits) from a physical windows 7 machine. Initial performance was dreadful, but improved as I switched to virtio and spice. I've been running linux VM's somewhat longer (much longer if you count kvm without libvirt). There are lots of choices exposed by virt-manager. How do I find out what the choices mean, and which are good ones? This was true for the video (resolved by following instructions for spice, though I still wonder what the other settings are for), disks and the network. In particular, I have a choice of lots of interfaces for my network; I picked eth1:macvtap because I wanted to bridge eth1. But there is a "Source Mode" which I left at VEPA, even though Bridged was another choice. But the bridge would already seem implicit in picking a source device of eth1:macvtap. I don't know what "source mode" means. The choices in the GUI seem like some of the options listed under forward on http://libvirt.org/formatnetwork.html; is that a good place to look for clarification. I started a 2nd VM that also used eth1:macvtap (with virtio) and it had almost no network throughput. So maybe I should use some other method? I notice the network manager connection gui allows creation of bridges on the network; should I be using that? I have been reading documentation, but I haven't found either a task-oriented discussion ("to get a windows machine working well, use these options" or "follow these steps") or an easy way to go from the choices in the GUI to a discussion of their meaning. Thanks for any help you can offer. Ross Boylan _______________________________________________ libvirt-users mailing list libvirt-users(a)redhat.com https://www.redhat.com/mailman/listinfo/libvirt-users

1 1

[libvirt-users] still possible to use traditional bridge network setup ?
by Lentes, Bernd 24 Mar '15

24 Mar '15

Hi, i'm currently installing a SLES 12 64bit system. libvirt-client-1.2.5-13.3.x86_64 and libvirt-daemon-1.2.5-13.3.x86_64. Formerly I created my vm's (KVM) using a traditional bridge in my host systems, mostly SLES 11 SP3. But with SLES 12 I don't succeed. I can use the macvtap device in the host, but I like to be able to communicate between host and guest. Is the traditional bridge setup not any longer available ? Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg Je suis Charlie Helmholtz Zentrum München Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH) Ingolstädter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir´in Bärbel Brumme-Bothe Geschäftsführer: Prof. Dr. Günther Wess, Dr. Nikolaus Blum, Dr. Alfons Enhsen Registergericht: Amtsgericht München HRB 6466 USt-IdNr: DE 129521671

2 7

[libvirt-users] KVM live migration i/o error
by Francesc Guasch 24 Mar '15

24 Mar '15

Hi. I have three Ubuntu Server 14.04 trusty with KVM. Two of them are HP servers and one is Dell. Both brands run fine the KVM virtual servers, and I can do live migration between the HPs. But I get I/O errors in the vda when I migrate to or from the Dell server. I have shared storage with NFS, mounted the same way in all of them: nfs.sever:/kvm /var/lib/libvirt/images nfs auto,vers=3 I checked the version of all the packages to make sure are the same. I got: kernel: 3.13.0-43-generic #72-Ubuntu SMP x86_64 libvirt: libvirt: 1.2.2-0ubuntu13.1.9 qemu-utils: 2.0.0+dfsg-2ubuntu1.10 qemu-kvm: 2.0.0+dfsg-2ubuntu1.10 I made sure the Cache in the Storage is set to None. Disk bus: virtio Cache mode: none IO mode: default I run this to do live migration: virsh migrate --live virtual qemu+ssh://dellserver/system I open two consoles with virt-manager, one in the origin host and another one in the destination. As soon as it starts in the origin console I spot I/O error messages, when it finishes I got them in the console in the destination server. The file system is read only and I have to shut it down hard. end request I/O error, /dev/vda, sector 8790327 When I migrate to the other HP server the process runs fine. I don't know what else to check, I wonder if such different hardware could be a problem. These are the CPU flags in the HP server: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm c onstant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 po pcnt lahf_lm dtherm tpr_shadow vnmi flexpriority ept vpid And those in the Dell server: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant _tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow I tried to check the log files in /var/log/libvirt but I can't see any different message when I migrate from HP to HP than when I do from HP to Dell. I think I found something checking SELinux. ls -Z and getfattr return nothing. But ps -eZ showed something very different in the Dell server. This is in the HP server: /usr/sbin/libvirtd 1034 ? 11:51:44 libvirtd libvirt-09540b5d-82 701 ? 05:28:40 qemu-system-x86 unconfined 1 ? 00:01:00 init In the Dell server init is confined in lxc and there are also lxc-start processes. /usr/sbin/libvirtd 1622 ? 05:07:07 libvirtd libvirt-8a0f9087-32d... 29926 ? 00:00:01 qemu-system-x86 lxc-container-default 1774 ? 00:00:00 init /usr/bin/lxc-start 1763 ? 00:00:00 lxc-start There is also LXC installed in that server ! Maybe that is messing with kvm. The qemu processes look fine to me but there is a chance the problem comes from there. I could move the LXC somewhere else or I can keep it there to try to fix this issue. What do you advice I should do now ?

1 0

[libvirt-users] kvm/vmware side-by-side?
by Boylan, Ross 21 Mar '15

21 Mar '15

http://libvirt.org/drvvmware.html says "The libvirt VMware driver should be able to manage any Workstation, Player, Fusion version supported by the VMware VIX API." 1. Does this mean it supports the vmware hypervisor, or just that it understands the disk images and perhaps other cotnrol file info? 2. If it supports the hypervisor, does this mean that kvm and vmware hypervisors can be running on the same host? I've read statements elsewhere that they are incompatible. I'd probably be running VMWare Workstation 11, though I could get Player or vCenter Server if it mattered. Thanks. Ross Boylan

1 0

[libvirt-users] getting oriented/networking
by Boylan, Ross 21 Mar '15

21 Mar '15

I've been using virt-manager and kvm with a disk image (as in the raw bits) from a physical windows 7 machine. Initial performance was dreadful, but improved as I switched to virtio and spice. I've been running linux VM's somewhat longer (much longer if you count kvm without libvirt). There are lots of choices exposed by virt-manager. How do I find out what the choices mean, and which are good ones? This was true for the video (resolved by following instructions for spice, though I still wonder what the other settings are for), disks and the network. In particular, I have a choice of lots of interfaces for my network; I picked eth1:macvtap because I wanted to bridge eth1. But there is a "Source Mode" which I left at VEPA, even though Bridged was another choice. But the bridge would already seem implicit in picking a source device of eth1:macvtap. I don't know what "source mode" means. The choices in the GUI seem like some of the options listed under forward on http://libvirt.org/formatnetwork.html; is that a good place to look for clarification. I started a 2nd VM that also used eth1:macvtap (with virtio) and it had almost no network throughput. So maybe I should use some other method? I notice the network manager connection gui allows creation of bridges on the network; should I be using that? I have been reading documentation, but I haven't found either a task-oriented discussion ("to get a windows machine working well, use these options" or "follow these steps") or an easy way to go from the choices in the GUI to a discussion of their meaning. Thanks for any help you can offer. Ross Boylan

2 2

[libvirt-users] libvirt-python Segfaults
by Harish Vishwanath 20 Mar '15

20 Mar '15

Hello I am trying to get libvirt-python working in Ubuntu 14.04 64 bit system. I tried installing the binaries from the repo itself: 1. root@test-vm8-109:/home/test# libvirtd --version libvirtd (libvirt) 1.2.2 root@test-vm8-109:/home/test# python Python 2.7.6 (default, Mar 22 2014, 22:59:56) [GCC 4.8.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import libvirt >>> libvirt.__file__ '/usr/lib/python2.7/dist-packages/libvirt.pyc' >>> c = libvirt.virConnect("lxc:///") >>> c.listAllDomains() Segmentation fault (core dumped) 2. Installing the latest libvirt-python from pypi (1.2.13) also has the same issue. This is the gdb bt of the core: [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `python test.py'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007fd8d91b19a9 in virObjectIsClass () from /usr/lib/libvirt.so.0 (gdb) bt #0 0x00007fd8d91b19a9 in virObjectIsClass () from /usr/lib/libvirt.so.0 #1 0x00007fd8d9268d02 in virConnectListAllDomains () from /usr/lib/libvirt.so.0 #2 0x00007fd8d964db96 in libvirt_virConnectListAllDomains (self=<optimized out>, args=<optimized out>) at libvirt-override.c:2470 #3 0x000000000052c6d5 in PyEval_EvalFrameEx () #4 0x000000000055c594 in PyEval_EvalCodeEx () #5 0x000000000052ca8d in PyEval_EvalFrameEx () #6 0x000000000055c594 in PyEval_EvalCodeEx () #7 0x00000000005b7392 in PyEval_EvalCode () #8 0x0000000000469663 in ?? () #9 0x00000000004699e3 in PyRun_FileExFlags () #10 0x0000000000469f1c in PyRun_SimpleFileExFlags () #11 0x000000000046ab81 in Py_Main () #12 0x00007fd8da894ec5 in __libc_start_main (main=0x46ac3f <main>, argc=2, argv=0x7fff0fcbd218, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fff0fcbd208) at libc-start.c:287 #13 0x000000000057497e in _start () Am I missing something? Regards, Harish

2 3

[libvirt-users] Building libvirt 1.2.13 from source
by Harish Vishwanath 20 Mar '15

20 Mar '15

Hello I am trying to build libvirt 1.2.13 (latest) from source on a Ubuntu 14.04 64 bit box. After installing all the dependencies (libyajl, libdevmapper, libpciaccess, libnl), I could finish the build and install. However, invoking libvirtd throws this: root@ubuntu:/home/hvishwanath/Downloads/libvirt-1.2.13# libvirtd libvirtd: /usr/lib/libvirt-qemu.so.0: version `LIBVIRT_QEMU_1.2.3' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.9' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.3' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.11' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.7' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.12' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.5' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.6' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_1.2.8' not found (required by libvirtd) libvirtd: /usr/lib/libvirt.so.0: version `LIBVIRT_PRIVATE_1.2.13' not found (required by libvirtd) Any help is much appreciated. Regards, Harish

4 3

[libvirt-users] C code to generate domain XML
by Parvathi 20 Mar '15

20 Mar '15

Hi, Are there any C code (in libvirt) to generate domain XML like the one we supply to virsh? Thanks!

2 1

[libvirt-users] Development of application on using the libvirt API(s)
by Parvathi 20 Mar '15

20 Mar '15

Hi, I am developing an application that would essentially control/run VMs on a X86_64 host machine. The existing OS is 32 bit based so the application needs to be 32bit too. KVM/QEMU are 64 bit so that guests could be either be 32 or 64 bit. Does using libvirt as 32bit library on a 64bit host (capable of hosting 32 and 64 bit guests) pose any problems? Will it even work? Thanks, Parvathi

2 1

[libvirt-users] Regarding save and restore in libvirt 1.2.2
by cool dharma06 19 Mar '15

19 Mar '15

hi all, i am exploring openstack. By the openstack i experimented the resizing instance its working fine. But from virsh i tried save and redstore VM its not working properly. i put GDB on libvirtd process also its not showing anything. its running perfectly. while virsh save vm id filename -> saving the VM and get into shutdown state. then i tried to restore by virsh restore filename --running -> its showing as running then its getting destroyed automatically. I cant able find the issue. I grepped the logs also its not showing anything related to errors. 2. By virsh save-image-edit filename i tried to edit the vCPUs number but i am not able to edit and save the file. Its showing the following error -> "error: unsupported configuration: Target domain vCPU count 2 does not match source 1" Give some suggestions to resolve the issue. Thanks & regrads, cooldharma06 .. :)

1 0

[libvirt-users] pty pairing host - guest
by Neel Basu 19 Mar '15

19 Mar '15

HI!, I am using virt-manager GUI. There I can add a `Console Device` through Add Hardware. I can add a virtio pty WITHOUT restarting the VM. also I get a pty allocated to host machine say `/dev/pty/M` My expectation is this `host:/dev/pty/M` is connected with a `guest:/dev/ttyN`. so If I open minicom or screen and write to `host:/dev/pty/M` it will be propagated to 'guest:/dev/ttyN'. Is my expectation correct ? If it is correct how will I know what is the guest tty allocated against this host pty ? This is what I've tried: dumpxml returns <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> I expected host:/dev/pts/1 is paired with guest:/dev/ttyS0. so I opened screen/cat/echo on both sides but could not exchange messages ------ Similar to console device I can add a Serial device but that requires a reboot of the guest VM. However I tried that though I prefer to do it without a guest restart. <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> here also I expected host:/dev/pts/1 is paired with /dev/ttyS0 but couldn't communicate. My sole requirement is to have a tty pair in host and guest that can be used to communicate with each other. I am using qemu-kvm. Thank You.

2 1

[libvirt-users] how to get disk snapshot size
by Yitao Jiang 17 Mar '15

17 Mar '15

Hi,guys I wanna to get the disk snapshot size, but found nothing libvirt commands related,except qemu-img. I create two disk snapshots, but nothing return its' size [root@cskvm01 qcow2]# qemu-img info /mnt/e6758700-af68-3c06-ade3-53f5f9b93507/e2cf6551-0d2c-4382-a86c-8ba633954ff2 image: /mnt/e6758700-af68-3c06-ade3-53f5f9b93507/e2cf6551-0d2c-4382-a86c-8ba633954ff2 file format: qcow2 virtual size: 5.0G (5368709120 bytes) disk size: 1.0G cluster_size: 65536 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 4fc42d73-8257-42bd-8807-81700fd3c689 0 2015-03-15 21:05:55 01:05:53.583 2 2fd6aeab-cb26-446d-b1c6-e8d70d33f651 0 2015-03-15 21:50:35 00:00:00.000 After wrote data to the disk, then create another snapshot [root@cskvm01 qcow2]# qemu-img info /mnt/e6758700-af68-3c06-ade3-53f5f9b93507/e2cf6551-0d2c-4382-a86c-8ba633954ff2 image: /mnt/e6758700-af68-3c06-ade3-53f5f9b93507/e2cf6551-0d2c-4382-a86c-8ba633954ff2 file format: qcow2 virtual size: 5.0G (5368709120 bytes) disk size: 3.9G cluster_size: 65536 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 4fc42d73-8257-42bd-8807-81700fd3c689 0 2015-03-15 21:05:55 01:05:53.583 2 2fd6aeab-cb26-446d-b1c6-e8d70d33f651 0 2015-03-15 21:50:35 00:00:00.000 3 63815565-3a06-4366-a1b3-bfeb9c4a07b4 0 2015-03-15 22:22:43 00:00:00.000 VM SIZE column still show 0 Here is my environment qemu-img version 0.12.1, Copyright (c) 2004-2008 Fabrice Bellard libvirtd (libvirt) 0.10.2 CentOS release 6.5 (Final) 2.6.32-431.el6.x86_64 --- Thanks, Yitao(依涛姜) jiangyt.github.io

3 3

[libvirt-users] Processor usage of qemu process.
by Dominique Ramaekers 15 Mar '15

15 Mar '15

I have been using libvirt for a while now with some linux guest installed. And everything has been working great. I've got a nice new (used) HP virtual host with 12 x dual core and 48Gb mem. My Windows servers are getting old, so I found it was time to take the next step and also virtualise my Windows systems. Now I've got two Windows guests on my new host: - A Windows 8.1 which runs a Autodesk Job Processor - A Windows Server 2012 R2 which runs a Pervasive SQL, Autodesk Vault Server (MSSQL, IIS), Autodesk license server,... The first is constanly using 30% host-CPU and the second one is using 50% host-CPU. Both guests are using <5% guest CPU... (Host system load is between 0.1 and 0.3...) Is it normal Windows guests take up 30% to 50% host CPU resources? The Windows 8.1 is actualy a simpel PC with almost no activity... Version: QEMU emulator version 2.0.0 (Debian 2.0.0+dfsg-2ubuntu1.10), Copyright (c) 2003-2008 Fabrice Bellard

3 13