- Users - libvirt List Archives

[libvirt-users] That the Linux bridge configuration does not work afer I upgraded the kernel to 2.6.33.2.
by Frank Peng 19 Apr '10

19 Apr '10

Hello, When I use a standard Redhat kernel, it's ok. Everything's working right. That the Linux bridge configuration does not work afer I upgraded the kernel to 2.6.33.2. Why? [root@node78 ~]# cat /etc/issue Red Hat Enterprise Linux Server release 5.5 (Tikanga) Kernel \r on an \m [root@node78 ~]# uname -a Linux node78 2.6.33.2 #1 SMP Wed Apr 14 10:10:29 CST 2010 x86_64 x86_64 x86_64 GNU/Linux [root@node78 ~]# cat /etc/sysconfig/selinux # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - SELinux is fully disabled. SELINUX=disabled # SELINUXTYPE= type of policy in use. Possible values are: # targeted - Only targeted network daemons are protected. # strict - Full SELinux protection. SELINUXTYPE=targeted [root@node78 ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@node78 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) DEVICE=eth0 HWADDR=00:15:17:11:16:18 BRIDGE=br0 NM_CONTROLLED=no ONBOOT=yes [root@node78 ~]# cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.78 NETMASK=255.255.255.0 NETWORK=192.168.0.0 DELAY=0 NM_CONTROLLED=no ONBOOT=yes [root@node78 ~]#cd /usr/src/ [root@node78 ~]#tar jxf linux-2.6.33.2.tar.bz2 [root@node78 ~]#ln -s linux-2.6.33.2 linux [root@node78 ~]#cd linux [root@node78 ~]#cp /boot/config-2.6.18-164.el5 /usr/src/linux-2.6.33.2/.config [root@node78 ~]#make menuconfig (add the option "enable deprecated sysfs feathures to support old userspace tools") [root@node78 ~]#make && make modules && make modules_install && make install [root@node78 ~]# ifconfig br0 Link encap:Ethernet HWaddr 00:15:17:11:16:18 inet addr:192.168.0.78 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe11:1618/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7217 errors:0 dropped:0 overruns:0 frame:0 TX packets:273 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:738606 (721.2 KiB) TX bytes:36168 (35.3 KiB) eth0 Link encap:Ethernet HWaddr 00:15:17:11:16:18 inet6 addr: fe80::215:17ff:fe11:1618/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7490 errors:0 dropped:0 overruns:0 frame:0 TX packets:304 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:866112 (845.8 KiB) TX bytes:42312 (41.3 KiB) Memory:b8820000-b8840000 eth1 Link encap:Ethernet HWaddr 00:15:17:11:16:19 inet addr:10.0.7.78 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::215:17ff:fe11:1619/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1056 (1.0 KiB) TX bytes:10982 (10.7 KiB) Memory:b8800000-b8820000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1831 errors:0 dropped:0 overruns:0 frame:0 TX packets:1831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3576260 (3.4 MiB) TX bytes:3576260 (3.4 MiB) [root@node78 ~]# ifconfig vmbr0 vmbr0: error fetching interface information: Device not found Best Regards, Frank

1 0

[libvirt-users] STP default behavior for bridged (off) and NAT (on) networking in libvirt
by Francesco Pretto 18 Apr '10

18 Apr '10

Hello, when talking about networking in hypervisors, it's easy to distinguish the two classic configurations, NAT and bridged, and the official libvirt wiki does exactly in this way here [1]. NAT networking is already configured by libvirt creating a bridge called libvirt0, while bridged networking have to be configured manually by the user. The libvirt0 bridge for NAT networking is default configured in this way: STP=on MAXWAIT=0 While suggested br0 bridge for bridged networking is configured in this way: STP=off MAXWAIT=5 Please, can you explain me why STP is on for NAT and should be off for bridged networking? It seems much easier to me to create loops when using bridged networking than NAT. Moreover, reading this old debian bug about complaints of MAXWAIT != 0 when STP off, I'm wondering if the suggested configurations aren't actually switched. Thanks, Francesco [1] http://wiki.libvirt.org/page/Networking [2] http://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg700924.html

2 4

[libvirt-users] Default network needed?
by Andreas Ntaflos 18 Apr '10

18 Apr '10

Hi list, long(ish) time libvirt users, first time poster. Question: Is the default network (192.168.122.0/24, NAT) created by libvirt needed at all when guests are connected to the host's bridge device (and not the default network) I.e. when I have <interface type='bridge'> <source bridge='br0'/> <model type='virtio'/> </interface> in my guest definition is the default network ever even used? Or can I safely remove it? This may be a naive or stupid question but I have not found a definitive answer studying the documentation. Can anybody enlighten me? Thanks, Andreas -- Andreas Ntaflos GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4

2 2

[libvirt-users] Libvirtd
by marwen marwen 16 Apr '10

16 Apr '10

hello, I'm using libvirt for my project but i have some problem when we install it (libvirt) can you give me a manual for installation of libvirt and configuration of libvirtd think you so much

2 1

[libvirt-users] from vmdk to kvm
by Valerio Felici 13 Apr '10

13 Apr '10

Hi, I will try to explain my case, I hope this is rigth place to do it. My goal is migrate an Ubuntu 9.10 64bit VMWare VM from a Win2k8 64bit server to an Ubuntu 9.10 64bit server. Following some tutorials I've got a .qcow2 file from .vmdk and a .xml file from .vmx file Running virsh define/start all was fine, but VM is unaccessible: no ping, no ssh, also from hosting server. This is content of .xml file <domain type='kvm'> <name>Ubuntu9.04-Zimbra</name> <uuid>7f86897d-5eac-47d6-970d-c2639d58c340</uuid> <memory>2621440</memory> <currentMemory>2621440</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-0.11'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/opt/Plone/Ubuntu9.04-Zimbra.qcow2'/> <target dev='hda' bus='ide'/> </disk> <interface type='bridge'> <mac address='00:0c:29:82:5c:36'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='00:0c:29:82:5c:40'/> <source bridge='br0'/> <model type='virtio'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Starting VM, corrisponding on two interfaces declared, vnet1 e vnet2 are showed in ifconfig (vnet0 is for another VM) but "brctl showmacs br0" don't show their MACs What I wrong? Thanks for your attention, sorry if I missing to post some useful data, please tell me, what you need. -- A presto -Valerio-

2 2

[libvirt-users] libvirt: C++ or Java?
by Ganesh Pagade 12 Apr '10

12 Apr '10

Hello, I am planning to develop a management application for managing Redhat Xen and Redhat KVM hypervisors. I am evaluating the Java bindings versus the C++ version of libvirt. As part of evaluation, I could not find meaningful answers to the questions below. Hence, I thought that people on this mailing list would be the most appropriate to comment on them. Can you please let me know your views? 1. Are all functions that are available in C API available in Java? 2. Are Java bindings added along with every enhancement to C API? 3. If answer to above question is negative, typically how long does it takes for the addition of Java bindings for the enhancement? 4. Most of libvirt based third party management applications use which of Java bindings or C API? 5. What are your good/bad experiences while using either of C API or Java bindings? 6. What is your concluding personal recommendation? And finally, since libvirt is a Redhat Emerging Technology project, does Redhat or any other third party service providers provide paid assistance, support? Appreciate your time. Thanks. Regards, Ganesh

3 2

[libvirt-users] virt-top not showing disk and network usage
by Neil Aggarwal 11 Apr '10

11 Apr '10

Hello: I installed virt-top from epel onto my CentOS 5.4 host running KVM. When I run virt-top, it shows me the CPU and memory usage of the VMs, but the disk and network colums are empty. I found this page: http://people.redhat.com/~rjones/virt-top/faq.html That states it depends on what is supported by libvirt and the hypervisor. Is this implemented in KVM? If not, anyone have any info on when it will be? Thanks, Neil -- Neil Aggarwal, (281)846-8957 FREE trial: cPanel VPS with unmetered bandwidth http://UnmeteredVPS.net/cpanel

1 0

[libvirt-users] [libvirt] [LXC] Tyring to locate livbvirt operations for LXC relocation
by Avi Weit 11 Apr '10

11 Apr '10

Hello, I am searching for the libvirt operations for relocating LXC (system or application) containers. LXC relocation mechanism is done by checkpoint / restart. I went over libvirt API documentation and found the following methods: virDomainSave that receives a domain and path to state file. The method saves domain's memory contents into a disk file. virDomainRestore that receives a domain and path to state file. The method restores the domain from the state file created by save operation. Are these the proper methods to use for LXC relocation? I assume I can also use the corresponding operations via virsh (save / restore).. >From looking into lxcDriver object (defined under /src/lxc/xlc_driver.c in libvirt server source) I can see that NULLs are set in save and restore methods. Does that mean that there is no support for saving and restoring Linux containers? Is there a libvirt patch beyond the kernel patch that needs to be applied? I am using libvirt 0.7.5 and kernel 2.6.31 /* Function Tables */ static virDriver lxcDriver = { VIR_DRV_LXC, /* the number virDrvNo */ "LXC", /* the name of the driver */ lxcOpen, /* open */ lxcClose, /* close */ NULL, /* supports_feature */ NULL, /* type */ lxcVersion, /* version */ NULL, /* libvirtVersion (impl. in libvirt.c) */ virGetHostname, /* getHostname */ NULL, /* getMaxVcpus */ nodeGetInfo, /* nodeGetInfo */ lxcGetCapabilities, /* getCapabilities */ lxcListDomains, /* listDomains */ lxcNumDomains, /* numOfDomains */ lxcDomainCreateAndStart, /* domainCreateXML */ lxcDomainLookupByID, /* domainLookupByID */ lxcDomainLookupByUUID, /* domainLookupByUUID */ lxcDomainLookupByName, /* domainLookupByName */ lxcDomainSuspend, /* domainSuspend */ lxcDomainResume, /* domainResume */ lxcDomainShutdown, /* domainShutdown */ NULL, /* domainSave */ NULL, /* domainRestore */ NULL, /* domainMigratePrepare */ NULL, /* domainMigratePerform */ NULL, /* domainMigrateFinish */ ... ... Thanks, - Avi

2 2

[libvirt-users] libvirt: C++ or Java
by Gokhale, Shashibhushan 11 Apr '10

11 Apr '10

Hello, I am planning to develop a management application for managing Redhat Xen and Redhat KVM hypervisors. I am evaluating the Java bindings versus the C++ version of libvirt. As part of evaluation, I could not find meaningful answers to the questions below. Hence, I thought that people on this mailing list would be the most appropriate to comment on them. Can you please let me know your views? 1. Are all functions that are available in C API available in Java? 2. Are Java bindings added along with every enhancement to C API? 3. If answer to above question is negative, typically how long does it takes for the addition of Java bindings for the enhancement? 4. Most of libvirt based third party management applications use which of Java bindings or C API? 5. What are your good/bad experiences while using either of C API or Java bindings? 6. What is your concluding personal recommendation? And finally, since libvirt is a Redhat Emerging Technology project, does Redhat or any other third party service providers provide paid assistance, support? Thanks, Shashi

1 0

Re: [libvirt-users] ESX support
by Aaron Lippold 09 Apr '10

09 Apr '10

Hi Matthias, Sorry for the late reply. I was on travel with limited network access last week. That sounds great, if you need any help or someone to test stuff, please let me know since I am highly interested in helping in any way I can. First question, when I am testing can I use VMWare Workstation on my laptop as a replacement for a full fledged for just testing API and libVirt access? If so I can set that up on my F12 box and start running some tests with libvirt and cobbler. Any new updates on the storage and network efforts? What are the basic requirements that you are going to try to initially hit. I assume there is alway more you could do but what's your 1.0 'good to go' set? Thanks, Aaron On Sun, Mar 21, 2010 at 1:26 PM, Matthias Bolte <matthias.bolte(a)googlemail.com> wrote: > You can manage the power state of a domain (start, stop, suspend, and > resume), you can also define a new domain, undefine existing domains, > migrate domains between hosts and configure CPU and RAM limits of a > domain. > > Two major missing features are currently storage and network > management. This means that you currently cannot use the libvirt > storage and network API to manage the storage and network of an ESX > server. I'm going to address this soon. > > A minor missing feature is editing the virtual hardware configuration > of an existing domain. I'm currently working on this. > > The problem reported by Jonathan Kelley affects ESX 4.0 only. It's not > fixed yet, but I think I can get it fixed for libvirt 0.7.8. I've > withdrawn the first patch fix this issue. A better patch is more > involved, because I need to rework the controller handling internally. > > Documentation about the ESX support can be found at: > http://www.libvirt.org/drvesx.html > > If you have any questions about the ESX support feel free to ask. > > Matthias > > 2010/3/19 Aaron Lippold <lippold(a)gmail.com>: >> Hi, >> >> So google and the mailing list didn't clearly state if we could or >> couldn't create a new vm in a domain on ESX or just turn it on, off, >> restart etc. >> >> Has the XML generation issue been addressed in 0.7.6+? If the docs >> exist, please point me to them and I will be glad to RT*M :). >> >> Thanks, >> >> A >> >> On Fri, Mar 12, 2010 at 4:21 PM, Matthias Bolte >> <matthias.bolte(a)googlemail.com> wrote: >>> 2010/3/9 Jonathan Kelley <jkelley(a)vm-labs.com>: >>>> Just curious but how long has ESX support been in libvirt? >>> >>> Since version 0.7.0 (August 2009). >>> >>>> Also I noticed this error when accessing one of my windows vms: >>>> >>>> error: internal error Expecting VMX entry 'scsi0.virtualDev' to be >>>> 'buslogic' or 'lsilogic' but found 'lsisas1068' >>> >>> I've just posted a patch to add lsisas1068 to the list of known SCSI >>> controller types. >>> >>> Thanks for reporting. >>> >>> Matthias >>> >> >

2 1

[libvirt-users] libvirt, kvm, pxe boot failed
by Frank Matthieß 09 Apr '10

09 Apr '10

Hello all, on my debian squeeze system i have the problem as some others[1] using this combination of libvirt, kvm and qemu. "Cannot boot from non-existent NIC" is the qemu-kvm error message [1] http://www.google.com/search?q=libvirt+Cannot+boot+from+non-existent+NIC&ie… Linux swb20 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i686 GNU/Linux ii kvm 1:0.12.3+dfsg-4 dummy transitional pacakge from kvm to qemu- ii libvirt-bin 0.7.7-1 the programs for the libvirt library ii libvirt-dev 0.7.7-1 development files for the libvirt library ii libvirt-doc 0.7.7-1 documentation for the libvirt library ii libvirt0 0.7.7-1 library for interfacing with different virtu ii linux-image-2.6.30-2-686 2.6.30-8squeeze1 Linux 2.6.30 image on PPro/Celeron/PII/PIII/ ii python-libvirt 0.7.7-1 libvirt Python bindings ii qemu-kvm 0.12.3+dfsg-4 Full virtualization on x86 hardware Is there any solution right now? Is a solution in preperation? Frank Matthieß. -- Frank Matthieß

2 1

[libvirt-users] libvirt: C++ or Java
by Gokhale, Shashibhushan 09 Apr '10

09 Apr '10

Hello, I am planning to develop a management application for managing Redhat Xen and Redhat KVM hypervisors. I am evaluating the Java bindings versus the C++ version of libvirt. As part of evaluation, I could not find meaningful answers to the questions below. Hence, I thought that people on this mailing list would be the most appropriate to comment on them. Can you please let me know your views? 1. Are all functions that are available in C API available in Java? 2. Are Java bindings added along with every enhancement to C API? 3. If answer to above question is negative, typically how long does it takes for the addition of Java bindings for the enhancement? 4. Most of libvirt based third party management applications use which of Java bindings or C API? 5. What are your good/bad experiences while using either of C API or Java bindings? 6. What is your concluding personal recommendation? And finally, since libvirt is a Redhat Emerging Technology project, does Redhat or any other third party service providers provide paid assistance, support? Thanks, Shashi

1 0

[libvirt-users] VIR_DOMAIN_DEVICE_MODIFY_CONFIG flag.
by Sharad Mishra 06 Apr '10

06 Apr '10

Hi, If a resource in a live VM is modified with the flag " VIR_DOMAIN_DEVICE_MODIFY_CONFIG". Is it same as - do not modify the resource now but change it at next boot? Thanks Sharad Mishra IBM

1 0

[libvirt-users] libvirt on Debian - can I safely upgrade?
by Thomas Lutz 04 Apr '10

04 Apr '10

Hi there, I'm currently using libvirt 0.4.6 from the Debian sources with 6 VMs running and since I'm getting random crashes of one of the VMs without any logfile entry in either host or guest (libvirt debugging not turned on as I found out about it just today) I want to upgrade to the latest version (0.7.7 - I guess) from Debian backports. Is this huge upgrade safely possible with just switching sources to backports? Or can I expect problems? Rebooting the VMs is obligatory at the end of the upgrade? Thanks in advance and best regards, Thomas Lutz

1 0

Re: [libvirt-users] question
by mattias 03 Apr '10

03 Apr '10

same error about a missed certificate but the text are in my native language swedish something like CA certificate On Sat, 2010-04-03 at 21:11 +0300, Danel Ahman wrote: > Try to use openvz:///system or openvz://localhost/system > > Danel > > On 03.04.2010, at 21:05, mattias wrote: > > > i try to connect to my local libvirt to use openvz > > openvz://localhost > > but i get an error about a missed certificate > > and when i use > > openvz:///localhost > > only a eror message says could not connect > > libvirt error > > > > _______________________________________________ > > libvirt-users mailing list > > libvirt-users(a)redhat.com > > https://www.redhat.com/mailman/listinfo/libvirt-users >

1 0

[libvirt-users] question
by mattias 03 Apr '10

03 Apr '10

i try to connect to my local libvirt to use openvz openvz://localhost but i get an error about a missed certificate and when i use openvz:///localhost only a eror message says could not connect libvirt error

1 0

[libvirt-users] Creating a private network
by Brown, Matt D. 02 Apr '10

02 Apr '10

I am trying to create a separate private network between the host (domain 0) and the guests. Using virsh, I created a bridge network, virbr1. I can successfully add guest interfaces to the bridge network and communicate between the guests. However, I am unable to communicate between the host and any of the guests. I created eth0:1 on the host and configured virbr1 to forward to eth0:1 (mode="route" dev="eth0:1"), but there is still no communication. I don't think creating eth0:1 is the right thing to do. I think I need to create a virtual interface on domain 0 that is part of the bridge network, virbr1. However, when I run virsh attach-interface with domain-0, it fails. What am I missing?? Matt OS: RHEL 5, Xen kernel virbr1 Bridge Network (First attempt) <network> <name>private</name> <bridge name="virbr2" /> <ip address="169.254.1.1" netmask="255.255.0.0"> </ip> </network> virbr1 Bridge Network (First attempt) <network> <name>private</name> <bridge name="virbr2" /> <ip address="169.254.1.1" netmask="255.255.0.0" /> <forward mode="route" dev="eth0:1" /> </network>

1 0

[libvirt-users] connect libvirt and virtualbox
by angelo alfano 01 Apr '10

01 Apr '10

conn = libvirt.open("vbox:///session") return this error: libvir: VBOX error : internal error unable to initialize VirtualBox driver API Traceback (most recent call last): File "prova.py", line 5, in <module> conn = libvirt.open("vbox:///session") File "/usr/lib/python2.6/dist-packages/libvirt.py", line 163, in open if ret is None:raise libvirtError('virConnectOpen() failed') libvirt.libvirtError: internal error unable to initialize VirtualBox driver API why?

4 10

[libvirt-users] iSCSI supported initiators
by Alexander Pierce 01 Apr '10

01 Apr '10

What initiators does libvirt support for the iSCSI pool? Will it work with qlogic's iSCSI HBAs for instance? --- Alexander Pierce, RHCE Solutions Architect -- Red Hat, Inc. apierce(a)redhat.com -- +1 (530) MR-LINUX (675-4689) Learn. Network. Experience Open Source. The 2010 Red Hat Summit and JBoss World Boston. June 22 - 25, 2010 http://www.theredhatsummit.com http://www.jbossworld.com

2 1

[libvirt-users] advice on creating and reusing connections
by jeremy avnet 31 Mar '10

31 Mar '10

Are there any recommendations as to how often a new connection should be made versus reused? Right now we create a new connection *every time* we hit libvirt for something. We can easily change this so that a single connection is made for a series of libvirt calls, or even so that a single connection is used for the lifetime of the running application. What are the issues to consider when making these choices? We are connecting to qemu:///system. Thank you. .:. brainsik

2 1

[libvirt-users] connection creating
by jeremy avnet 31 Mar '10

31 Mar '10

Are there any recommendations as to how often a new connection should be made versus reused? Right now we create a new connection *every time* we hit libvirt for something. We can easily change this so that a single connection is made for a series of libvirt calls, or even so that a single connection is used for the lifetime of the running application. What are the issues to consider when making these choices? We are connecting to qemu:///system. Thank you. .:. brainsik

2 1

[libvirt-users] libvirt connections
by brandlk＠mathematik.uni-marburg.de 31 Mar '10

31 Mar '10

Hello, I'm working with libvirt version 0.7.7 and encountered some problems with ssh connections to the xen hypervisor: - if the hypervisor is not running libvirt.open("xen+ssh://host") doesn't time out put keeps trying to connect to host on port 8000. I've tried with the following test program: try: conn = libvirt.open("xen+ssh://host") except: print "failed" sys.exit(1) However: after aborting the program with Ctrl-C I get the exception. - I want to close all libvirt connections at the end, but closing the connections does not close the ssh - nc connections libvirt opens in the background to talk to the hypervisor. I have to manually delete all domain objects as well to get the pending ssh - nc connections closed. I can keep on using the domain object, even if I closed the connection before. Is this behaviour intended? Any help would be great. K. Haselhorst

2 2

[libvirt-users] Vserver patch for Libvirt
by Chaitra Gorantla 31 Mar '10

31 Mar '10

Hi all, I am using libvirt for managing KVM. I would also like to manage Vserver also using libvirt. Is there any patch available for vserver ? When will libvirt relase official patch for vserver? Thanks, Chaitra ________________________________ This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system. ______________________________________________________________________

2 2

[libvirt-users] Attach-interface vs attach-device
by steven765＠yahoo.com 30 Mar '10

30 Mar '10

Working with the two commands there's a noticeable difference in the time redhat takes to detect interfaces using attach-interface vs attach-device? About 5-8 seconds using attach interface, and near instant with attach-device. That little bit aside, I'm trying to find a way to 'unplug' a VM without actually removing the interface. The easy fix is to attach it without adding the tap interface to mybridge, but attach device and interface do not allow this. Looking in the source for libvirt I found the InterfacesStartmodeDefFormat however it seems that virsh doesn't export this option. Maybe this just needs to be implemented? Might anyone have insights as to the best method to pursue? I'm willing to do the leg work but I'm just starting to look into how the sources are laid out and that's going to take a bit. Pointers are appreciated. Thanks in advance, Steve

1 0

[libvirt-users] CfP with Extended Deadline 5th Workshop on Virtualization in High-Performance Cloud Computing (VHPC'10)
by Michael Alexander 30 Mar '10

30 Mar '10

Apologies if you received multiple copies of this message. ================================================================= CALL FOR PAPERS 5th Workshop on Virtualization in High-Performance Cloud Computing VHPC'10 as part of Euro-Par 2010, Island of Ischia-Naples, Italy ================================================================= Date: August 31, 2010 Euro-Par 2009: http://www.europar2010.org/ Workshop URL: http://vhpc.org SUBMISSION DEADLINE: Abstracts: April 4, 2010 (extended) Full Paper: June 19, 2010 (extended) Scope: Virtualization has become a common abstraction layer in modern data centers, enabling resource owners to manage complex infrastructure independently of their applications. Conjointly virtualization is becoming a driving technology for a manifold of industry grade IT services. Piloted by the Amazon Elastic Computing Cloud services, the cloud concept includes the notion of a separation between resource owners and users, adding services such as hosted application frameworks and queuing. Utilizing the same infrastructure, clouds carry significant potential for use in high-performance scientific computing. The ability of clouds to provide for requests and releases of vast computing resource dynamically and close to the marginal cost of providing the services is unprecedented in the history of scientific and commercial computing. Distributed computing concepts that leverage federated resource access are popular within the grid community, but have not seen previously desired deployed levels so far. Also, many of the scientific datacenters have not adopted virtualization or cloud concepts yet. This workshop aims to bring together industrial providers with the scientific community in order to foster discussion, collaboration and mutual exchange of knowledge and experience. The workshop will be one day in length, composed of 20 min paper presentations, each followed by 10 min discussion sections. Presentations may be accompanied by interactive demonstrations. It concludes with a 30 min panel discussion by presenters. TOPICS Topics include, but are not limited to, the following subjects: - Virtualization in cloud, cluster and grid HPC environments - VM cloud, cluster load distribution algorithms - Cloud, cluster and grid filesystems - QoS and and service level guarantees - Cloud programming models, APIs and databases - Software as a service (SaaS) - Cloud provisioning - Virtualized I/O - VMMs and storage virtualization - MPI, PVM on virtual machines - High-performance network virtualization - High-speed interconnects - Hypervisor extensions - Tools for cluster and grid computing - Xen/other VMM cloud/cluster/grid tools - Raw device access from VMs - Cloud reliability, fault-tolerance, and security - Cloud load balancing - VMs - power efficiency - Network architectures for VM-based environments - VMMs/Hypervisors - Hardware support for virtualization - Fault tolerant VM environments - Workload characterizations for VM-based environments - Bottleneck management - Metering - VM-based cloud performance modeling - Cloud security, access control and data integrity - Performance management and tuning hosts and guest VMs - VMM performance tuning on various load types - Research and education use cases - Cloud use cases - Management of VM environments and clouds - Deployment of VM-based environments PAPER SUBMISSION Papers submitted to the workshop will be reviewed by at least two members of the program committee and external reviewers. Submissions should include abstract, key words, the e-mail address of the corresponding author, and must not exceed 10 pages, including tables and figures at a main font size no smaller than 11 point. Submission of a paper should be regarded as a commitment that, should the paper be accepted, at least one of the authors will register and attend the conference to present the work. Accepted papers will be published in the Springer LNCS series - the format must be according to the Springer LNCS Style. Initial submissions are in PDF, accepted papers will be requested to provided source files. Format Guidelines: http://www.springer.de/comp/lncs/authors.html Submission Link: http://edas.info/newPaper.php?c=8553 IMPORTANT DATES April 4 - Abstract submission due (extended) May 19 - Full paper submission (extended) July 14 - Acceptance notification August 3 - Camera-ready version due August 31 - September 3 - conference CHAIR Michael Alexander (chair), scaledinfra technologies GmbH, Austria Gianluigi Zanetti (co-chair), CRS4, Italy PROGRAM COMMITTEE Padmashree Apparao, Intel Corp., USA Volker Buege, University of Karlsruhe, Germany Roberto Canonico, University of Napoli Federico II, Italy Tommaso Cucinotta, Scuola Superiore Sant'Anna, Italy Werner Fischer, Thomas Krenn AG, Germany William Gardner, University of Guelph, Canada Wolfgang Gentzsch, DEISA. Max Planck Gesellschaft, Germany Derek Groen, UVA, The Netherlands Marcus Hardt, Forschungszentrum Karlsruhe, Germany Sverre Jarp, CERN, Switzerland Shantenu Jha, Louisiana State University, USA Xuxian Jiang, NC State, USA Kenji Kaneda, Google, Japan Yves Kemp, DESY Hamburg, Germany Ignacio Llorente, Universidad Complutense de Madrid, Spain Naoya Maruyama, Tokyo Institute of Technology, Japan Jean-Marc Menaud, Ecole des Mines de Nantes, France Anastassios Nano, National Technical University of Athens, Greece Oliver Oberst, Karlsruhe Institute of Technology, Germany Jose Renato Santos, HP Labs, USA Borja Sotomayor, University of Chicago, USA Yoshio Turner, HP Labs, USA Kurt Tuschku, University of Vienna, Austria Lizhe Wang, Indiana University, USA Chao-Tung Yang, Tunghai University, Taiwan DURATION: Workshop Duration is one day. GENERAL INFORMATION The workshop will be held as part of Euro-Par 2010, Island of Ischia-Naples, Italy. Euro-Par 2010: http://www.europar2010.org/

1 0