- Users - libvirt List Archives

[libvirt-users] QEMU monitor
by Nikita A Menkovich 14 Mar '11

14 Mar '11

Hello, Is there any way to change VNC password without rebooting virtual machine? It is available through qemu monitor, but, it seems, there is no way to do add monitor to kvm. -- Nikita A Menkovich http://libc6.org/ JID: menkovich(a)gmail.com

2 3

[libvirt-users] ruby bindings has two gems (I think)
by James Barkley 14 Mar '11

14 Mar '11

When I look at remote gems I see: - libvirt (0.2.0), "A ruby client library providing an interface to libvirt via FFI" - ruby-libvirt (0.3.0), "Provides bindings for libvirt" I've been using ruby-libvirt, but maybe I should give libvirt a try? Has anyone used libvirt (0.2.0) and developed opinions they'd like to share? -jb

2 3

[libvirt-users] Libvirt with multipath devices and/or FC on NPIV
by C.D. 14 Mar '11

14 Mar '11

Hello, I am trying to find out a best practice for a specific scenario. First of all I would like to know what is the proper way to set up multipath, who should care about it the host or the guest. Right now I have a setup where I have one multipath which sets my host to boot from FC SAN. I have another multipathed LUN in the host which is essentially a dm which I attached to a guest, however through virtio. I added the devices through virsh with pool type of "mpath" and path through /dev/mapper/. So here is my first question: with such a setup the multipath and eventual fail-over is taken care by the host OS, right, the guest will not notice is I suppose? But what about migration. What if I decide to migrate the guest to another host. How would that work out? WIth shared directory it is easy, you just have the images in it, but what about such a setup. I can always add the aforementioned LUN, where the guest resides to another Storage Group on the SAN where the new host has access and I can make sure that the mpath device name is persistent across all hosts, but is that the right approach. Here is another question that is bugging me. I have FC HBA-s on all hosts and I would like to make a HBA visible through my guest. I stumbled upon a bug that is documented in redhat's bugzilla that attempted creation of NPIV on pci_0000_blah_blah instead on the scsi_hostX device, but I fixed that easily in the xml and although virsh doesn't seem to think I completed the nodedev-create NPIV_for_my_FC.xml the device is seen as a child in nodedev-list and what is more important the WWN are seen on the SAN switch. So this seems to be working OK, however I don't know how to attach this new shiny device that I created to a guest. Could someone give me a hint? What is the proper way to attach this new devices to a guest OS and do that persistently. Do I do that with virsh's attach-device and if so what is the proper XML format? Should I dump the XML for the newly created NPIV nodedev and try to attach that? And again with multipathing. What if I decided to create NPIV on my two FC cards in every host, then do the zoning and attach those newly created NPIV nodes to the guests? Will that produce the same effect that such a multipath does on the host? It doesn't really matter if I would use it for root drive or a shared gfs2 storage between guests, I just want to know is this possible and is it the right thing to do, or should I stick to setup in my previous paragraph? And last question: what about migration with such NPIV FC devices. I can move a guest around, but will that move my NPIV FC with it's WWN so that I can continue using my zoning (I think I just realized that this might be impossible because I'm migrating the guest, not the entire setup of libvirt, but probably I'm wrong and I'm not aware of a proper method to do it correctly?). Probably those questions are easy to answer, but please bare with me, I'm playing with libvirt in an enterprise setup only for the last couple of days and I would really like to make it right and kick some VMware ass. By the way, all my hosts are Fedora 14, with kernel 2.6.37 (rebuild of the one for Fedora 15 from koji, because there was a small glitch with Qlogic's driver in the stock 2.6.35). Most of my guests will be SL6,CentOS5/6(when it arrives) and a couple of windows XP guests (but I'm not really concerned with that). Thanks for the support in advance P.S. please keep me in CC, as I'm not on the list. Thank you

1 1

[libvirt-users] Libvirt with multipath devices and/or FC on NPIV
by C.D. 14 Mar '11

14 Mar '11

Hello, I am trying to find out a best practice for a specific scenario. First of all I would like to know what is the proper way to set up multipath, who should care about it the host or the guest. Right now I have a setup where I have one multipath which sets my host to boot from FC SAN. I have another multipathed LUN in the host which is essentially a dm which I attached to a guest, however through virtio. I added the devices through virsh with pool type of "mpath" and path through /dev/mapper/. So here is my first question: with such a setup the multipath and eventual fail-over is taken care by the host OS, right, the guest will not notice is I suppose? But what about migration. What if I decide to migrate the guest to another host. How would that work out? WIth shared directory it is easy, you just have the images in it, but what about such a setup. I can always add the aforementioned LUN, where the guest resides to another Storage Group on the SAN where the new host has access and I can make sure that the mpath device name is persistent across all hosts, but is that the right approach. Here is another question that is bugging me. I have FC HBA-s on all hosts and I would like to make a HBA visible through my guest. I stumbled upon a bug that is documented in redhat's bugzilla that attempted creation of NPIV on pci_0000_blah_blah instead on the scsi_hostX device, but I fixed that easily in the xml and although virsh doesn't seem to think I completed the nodedev-create NPIV_for_my_FC.xml the device is seen as a child in nodedev-list and what is more important the WWN are seen on the SAN switch. So this seems to be working OK, however I don't know how to attach this new shiny device that I created to a guest. Could someone give me a hint? What is the proper way to attach this new devices to a guest OS and do that persistently. Do I do that with virsh's attach-device and if so what is the proper XML format? Should I dump the XML for the newly created NPIV nodedev and try to attach that? And again with multipathing. What if I decided to create NPIV on my two FC cards in every host, then do the zoning and attach those newly created NPIV nodes to the guests? Will that produce the same effect that such a multipath does on the host? It doesn't really matter if I would use it for root drive or a shared gfs2 storage between guests, I just want to know is this possible and is it the right thing to do, or should I stick to setup in my previous paragraph? And last question: what about migration with such NPIV FC devices. I can move a guest around, but will that move my NPIV FC with it's WWN so that I can continue using my zoning (I think I just realized that this might be impossible because I'm migrating the guest, not the entire setup of libvirt, but probably I'm wrong and I'm not aware of a proper method to do it correctly?). Probably those questions are easy to answer, but please bare with me, I'm playing with libvirt in an enterprise setup only for the last couple of days and I would really like to make it right and kick some VMware ass. By the way, all my hosts are Fedora 14, with kernel 2.6.37 (rebuild of the one for Fedora 15 from koji, because there was a small glitch with Qlogic's driver in the stock 2.6.35). Most of my guests will be SL6,CentOS5/6(when it arrives) and a couple of windows XP guests (but I'm not really concerned with that). Thanks for the support in advance

1 0

[libvirt-users] Libvirt with multipath devices and/or FC on NPIV
by C.D. 14 Mar '11

14 Mar '11

Hello, I am trying to find out a best practice for a specific scenario. First of all I would like to know what is the proper way to set up multipath, who should care about it the host or the guest. Right now I have a setup where I have one multipath which sets my host to boot from FC SAN. I have another multipathed LUN in the host which is essentially a dm which I attached to a guest, however through virtio. I added the devices through virsh with pool type of "mpath" and path through /dev/mapper/. So here is my first question: with such a setup the multipath and eventual fail-over is taken care by the host OS, right, the guest will not notice is I suppose? But what about migration. What if I decide to migrate the guest to another host. How would that work out? WIth shared directory it is easy, you just have the images in it, but what about such a setup. I can always add the aforementioned LUN, where the guest resides to another Storage Group on the SAN where the new host has access and I can make sure that the mpath device name is persistent across all hosts, but is that the right approach. Here is another question that is bugging me. I have FC HBA-s on all hosts and I would like to make a HBA visible through my guest. I stumbled upon a bug that is documented in redhat's bugzilla that attempted creation of NPIV on pci_0000_blah_blah instead on the scsi_hostX device, but I fixed that easily in the xml and although virsh doesn't seem to think I completed the nodedev-create NPIV_for_my_FC.xml the device is seen as a child in nodedev-list and what is more important the WWN are seen on the SAN switch. So this seems to be working OK, however I don't know how to attach this new shiny device that I created to a guest. Could someone give me a hint? What is the proper way to attach this new devices to a guest OS and do that persistently. Do I do that with virsh's attach-device and if so what is the proper XML format? Should I dump the XML for the newly created NPIV nodedev and try to attach that? And again with multipathing. What if I decided to create NPIV on my two FC cards in every host, then do the zoning and attach those newly created NPIV nodes to the guests? Will that produce the same effect that such a multipath does on the host? It doesn't really matter if I would use it for root drive or a shared gfs2 storage between guests, I just want to know is this possible and is it the right thing to do, or should I stick to setup in my previous paragraph? And last question: what about migration with such NPIV FC devices. I can move a guest around, but will that move my NPIV FC with it's WWN so that I can continue using my zoning (I think I just realized that this might be impossible because I'm migrating the guest, not the entire setup of libvirt, but probably I'm wrong and I'm not aware of a proper method to do it correctly?). Probably those questions are easy to answer, but please bare with me, I'm playing with libvirt in an enterprise setup only for the last couple of days and I would really like to make it right and kick some VMware ass. By the way, all my hosts are Fedora 14, with kernel 2.6.37 (rebuild of the one for Fedora 15 from koji, because there was a small glitch with Qlogic's driver in the stock 2.6.35). Most of my guests will be SL6,CentOS5/6(when it arrives) and a couple of windows XP guests (but I'm not really concerned with that). Thanks for the support in advance P.S. please keep me in CC, as I'm not on the list. Thank you

1 0

[libvirt-users] Issue creating vm channel
by SAURAV LAHIRI 12 Mar '11

12 Mar '11

Hello, I am trying to create a lucid guest VM with a vmchannel between the guest and the hypervisor. Details below: KERNEL: # uname -a Linux saurav-desktop 2.6.38-2-generic #29~lucid1-Ubuntu SMP Mon Feb 7 13:35:14 UTC 2011 i686 GNU/Linux QEMU: # /usr/bin/qemu --version QEMU emulator version 0.13.0, Copyright (c) 2003-2008 Fabrice Bellard LIBVIRT: # /usr/sbin/libvirtd --version /usr/local/sbin/libvirtd (libvirt) 0.8.8 Below is a snippet of my libvirt xml file. =============================================================== <domain type='kvm' id='16'> <name>FinalTest</name> <uuid>212bc1f1-b4f7-1ed3-7dc3-2b4b82ab68d1</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <controller type='virtio-serial' index='0' max_ports='15' vectors='4'/> <channel type='pty'> <target type='virtio' name='org.linux-kvm.port.1'/> <address type='virtio-serial' controller='0' bus='0'/> </channel> <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/home/user1/linux_installed/image.cow2'/> <target dev='hda' bus='ide'/> <alias name='ide-disk0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> ================================================================ When i submit the xml file to virsh I get the following error: =============================================================== # virsh create vmTemplete-1.xml error: Failed to create domain from vmTemplete-1.xml error: internal error Process exited while reading console log output: char device redirected to /dev/pts/3 char device redirected to /dev/pts/4 open /dev/kvm: No such file or directory Could not initialize KVM, will disable KVM support kvm: -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.linux-kvm.port.1: virtio-serial-bus: Out-of-range port id specified, max. allowed: 0 kvm: -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.linux-kvm.port.1: Device 'virtserialport' could not be initialized =========================================================== What could be the problem ? Could any one please point to the correct direction with regard to this. Regards sl

1 1

[libvirt-users] dnsmasq not started when no dhcp enabled ?
by jbd 12 Mar '11

12 Mar '11

Hello everybody, i've defined a simple network, with no dhcp. I'd like to use dnsmasq only as a dns server. $ virsh net-dumpxml basicswitch <network> <name>basicswitch</name> <uuid>60f491d2-d6c4-6b57-8a50-081cace8dedc</uuid> <forward mode='nat'/> <bridge name='virbr1' stp='on' delay='0' /> <ip address='192.168.100.1' netmask='255.255.255.0'> </ip> </network> I start it : $ virsh net-start basicswitch Network basicswitch started $ virsh net-list Name State Autostart ----------------------------------------- basicswitch active no But i see no dnsmasq process : $ ps fax|grep dnsmas[q] Here the output of "virsh version" : $ virsh version Compiled against library: libvir 0.8.8 Using library: libvir 0.8.8 Using API: QEMU 0.8.8 Running hypervisor: QEMU 0.12.5 What is funny is that the dnsmasq process is created on another box with different version : $ virsh version Compiled against library: libvir 0.8.3 Using library: libvir 0.8.3 Using API: QEMU 0.8.3 Running hypervisor: QEMU 0.12.5 $ ps fax|grep dnsmas[q] 7104 ? S 0:00 dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/basicswitch.pid --conf-file= --listen-address 192.168.100.1 --except-interface lo Any advice on it ? Regards, Jean-Baptiste

2 2

[libvirt-users] libvirt configuration problem
by Onkar Mahajan 12 Mar '11

12 Mar '11

Hi , I am getting errors while configuring libvirt to compile it from source. There is a error in libnl checking for UDEV... no checking whether to compile with macvtap support... yes checking whether to compile with virtual port support... no checking for LIBNL... no configure: error: libnl-devel >= 1.1 is required for macvtap support I have already installed the libnl library in /lib/ [root@localhost lib]# ls libnl* libnl.a libnl-cli.so.2 libnl-genl.so libnl-nf.a libnl-nf.so.2.0.0 libnl-route.so.2 libnl.so.2.0.0 libnl-cli.a libnl-cli.so.2.0.0 libnl-genl.so.2 libnl-nf.la libnl-route.a libnl-route.so.2.0.0 libnl-cli.la libnl-genl.a libnl-genl.so.2.0.0 libnl-nf.so libnl-route.la libnl.so libnl-cli.so libnl-genl.la libnl.la libnl-nf.so.2 libnl-route.so libnl.so.2 Please help me !! Regards, Onkar

2 1

[libvirt-users] libvirt/kvm/qemu: pointopoint routed setup?
by Andreas Jellinghaus 12 Mar '11

12 Mar '11

Hi, can anyone give an example for a pointopoint routed setup? i.e. each virtual machine has one ip with pointopoint config to the host machine, on a private interface - thus the virtual machines can only talk to the host, which routes them and can use normal iptables for filtering all traffic. with xen this was a simple script doing ifconfig ${vif} ${main_ip} netmask 255.255.255.255 up ip route ${ipcmd} ${addr} dev ${vif} src ${main_ip} and an optional echo 1 >/proc/sys/net/ipv4/conf/${vif}/proxy_arp has someone implemented something like this with libvirt/kvm setup? can you give some pointers how to do this? I don't need high speed communication between the virtual machines, and the option to filter all traffic between them (without using the bridge netfilter tables) would be nice. Or is there a reason not to use such a setup, and a better option to implement this? Thanks for your help and best regards, Andreas Jellinghaus

1 0

[libvirt-users] Migrating existing debian system to KVM/libvirt
by Randall Webstuff 12 Mar '11

12 Mar '11

I have a dying machine running debian etch that acts as a web/mail server that I would like to virtualize using debian/kvm/libvirt. Is it as simple as removing the hard-disk (multiple ext2/ext3 partitions) from the dying machine into my newer server and then writing a custom xml config file? Is there a tutorial on doing this somewhere? Thanks. Randy

2 1

[libvirt-users] client certificate path hard coded?
by Anthony Goddard 12 Mar '11

12 Mar '11

Hi all, I'm trying to figure out how to get my desktop talking to two libvirt hosts using qemu+tls and I've read that virsh relies on hard coded paths to the certificates.. which seems to be true. Is there a way to tell virsh to use a different path to a certificate, or another way people solve this presently? Cheers, Ant

2 2

[libvirt-users] libvirt and phyp driver (Power Hypervisor guests)
by Boninsegna, Werner (Werner, ES-Best-Shore-Services-China-SH) 11 Mar '11

11 Mar '11

Hi all, I would like to ask about the status of the phyp driver to manage Power Hypervisor guests. According the documentation [1] the driver is supported, however it does not show up on the main driver page [2]. Has somebody already had experience using this driver in a productive or testing environment? [1] http://libvirt.org/guide/html/Application_Development_Guide-Connections-URI… [2] http://libvirt.org/drivers.html Kind regards, Werner --- Werner Boninsegna HP Enterprise Services

1 0

[libvirt-users] unable to connect to libvirtd at '*': No route to host
by Christoph Raible 10 Mar '11

10 Mar '11

Hi @all, I have the following systems: AMD Processor Scientific Linux 6.0 Kernelversion: 2.6.32-71.18.2.el6.x86_64 KVM / Libvirt out of the repository I've setup my TLS-Certificates with the following howto /http://wiki.libvirt.org/page/TLSSetup/ Now I want to connect the servers with /virsh -c qemu+tls://nebula3/system/(nebula3 is the hostname) but the following error message always is displayed: /error: unable to connect to libvirtd at 'nebula3': No route to host error: failed to connect to the hypervisor/ SELinux is disabled and the servers are in the same IP-Range (ping works fine) Passwordless ssh-login also works fine! If I connect to a server with qemu+ssh://nebula3/system all wroks fine... Installation with virt-manager an bridged networkinterface also works fine... Did anyone of you have an idea where my problem is? Thanks for Help :) Regards, Christoph -- Vorstand/Board of Management: Dr. Bernd Finkbeiner, Dr. Roland Niemeier, Dr. Arno Steitz, Dr. Ingrid Zech Vorsitzender des Aufsichtsrats/ Chairman of the Supervisory Board: Michel Lepert Sitz/Registered Office: Tuebingen Registergericht/Registration Court: Stuttgart Registernummer/Commercial Register No.: HRB 382196

2 3

[libvirt-users] venet as network device for openvz based VMs
by knawnd＠gmail.com 10 Mar '11

10 Mar '11

Hi! Is there any way to use venet (http://wiki.openvz.org/Venet) for openvz based VM via libvirt? Thanks! Nikolay.

1 0

[libvirt-users] ifname in openvz container
by knawnd＠gmail.com 10 Mar '11

10 Mar '11

Hi! Is there any way to specify ethernet device name to be created inside the openvz container? I could find such info at http://libvirt.org/formatdomain.html#elementsNICS. If I do as below I get br0 as ethernet device inside VM whereas I'd like it to be eth0. $ cat ovz.xml <domain type='openvz' id='144'> <name>144</name> <uuid>0071c128-58b4-4688-be17-1e062a22b36c</uuid> <vcpu>1</vcpu> <memory>524288</memory> <os> <type>exe</type> <init>/sbin/init</init> </os> <devices> <filesystem type='template'> <source name='centos-5-x86'/> <target dir='/'/> </filesystem> <interface type='bridge'> <source bridge='br0'/> </interface> </devices> </domain> $ virsh create ovz.xml Domain 144 created from ovz.xml $ grep -i netif /etc/vz/conf/144.conf NETIF="ifname=br0,bridge=br0,mac=52:54:00:74:DD:F3,host_ifname=veth144.0,host_mac=52:54:00:06:78:76" br0 is a bridge on the server (CT0). But I would like to assign ethernet device inside VM as eth0 i.e. ifname in VM config has to be eth0. ovzkernel release is 2.6.18-194.26.1.el5.028stab081.1 OS is CentOS 5.5, libvirt/virsh version is 0.8.8. Best regards, Nikolay.

1 2

[libvirt-users] diskspace and diskinodes tag for openvz
by knawnd＠gmail.com 09 Mar '11

09 Mar '11

Hi! as far as I understood from "xml format for openvz driver" thread available at [1] it should be possible to specify via libvirt disk size and disk inodes for openvz VM.But the following device section in VM xml description doesn't set disksize and diskinodes properly (it looks like those parameters are taken from default OpenVZ config and not as they are specified in libvirt tags): <devices> <filesystem type='template'> <source name='centos-5-x86'/> <target dir='/'/> <quota type="size" max="100000"/> <quota type="inodes" max="200000"/> </filesystem> </devices> Could anyone manage to set mentioned OpenVZ parameters properly? I am using libvirt-0.8.8, CentOS 5.5, vzctl version is 3.0.26-1. Thanks! Nikolay. [1] http://www.mail-archive.com/libvir-list@redhat.com/msg07329.html

2 2

[libvirt-users] openvz specific values for domain/devices tag
by knawnd＠gmail.com 09 Mar '11

09 Mar '11

Hi! Could you, please, point me to where I can read about possible values for domain/devices tag in case of OpenVZ? I couldn't find such info at [1] whereas e.g. filesystem is mentioned at [2] but not at [1]. Thanks! Nikolay. [1] http://libvirt.org/formatdomain.html#elementsDevices [2] http://libvirt.org/drvopenvz.html

2 2

[libvirt-users] Python API and events, how to deal with libvirtd stop/start
by Jasper 08 Mar '11

08 Mar '11

Hi list, I'm using the Python API to check for libvirt events. Works well, but when libvirtd is restarted, or stopped completely, the events are no longer seen. I guess this is logical, but how would I deal with this situation ? I can re-open the connection to libvirt and re-register the callbacks, but this does not work. If I call virEventLoopPureRegister() again, the app crashes with a glibc error. Any ideas ? You can reproduce this by using the event-test.py supplied with libvirt. Fire it up, restart libvirtd and see what happens when you start or stop a domain for example. Many thanks for any pointers. - Jasper

1 0

[libvirt-users] CDROM
by Markiewicz, Patrick F (N-No Laurels) 08 Mar '11

08 Mar '11

How would I "insert" a cdrom into a running virtual machine? Patrick

2 1

[libvirt-users] guest creation problem on pv dom0 kernel
by Tapas Mishra 06 Mar '11

06 Mar '11

I am having problem in guest creation for a pv-ops Dom0 kernel I compiled every thing from scratch.(Xen and 2.6.32.27 pv-ops dom0 kernel) on a Ubuntu Desktop 10.04 64 bit. Following is my config file for 2.6.32.27 http://pastebin.com/AvSVgVQE and the error I am getting trying to create a guest with virt-install is ERROR unable to connect to 'localhost:8000': Connection refused Traceback (most recent call last): File "/usr/bin/virt-install", line 943, in <module> main() File "/usr/bin/virt-install", line 715, in main conn = cli.getConnection(options.connect) File "/usr/lib/pymodules/python2.6/virtinst/cli.py", line 162, in getConnection conn = open_connection(connect) File "/usr/lib/pymodules/python2.6/virtinst/cli.py", line 177, in open_connection open_flags) File "/usr/lib/python2.6/dist-packages/libvirt.py", line 111, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: unable to connect to 'localhost:8000': Connection refused I am able to see xm info output but some how the guest creation is failing. I could be wrong, but this doesn't appear to be a kernel problem. Especially if xm info is working, so the xen service has started already. Maybe my libvirt version doesn't know how to use the xen 4.0 utils or the pvops kernel? I tried creating a guest by virt-manager also which when installed via apt-get install ubuntu-virt-server ubuntu-virt-mgmt installs following http://packages.ubuntu.com/lucid/<http://packages.ubuntu.com/lucid/libvirt-bin> ubuntu-virt-server http://packages.ubuntu.com/lucid/<http://packages.ubuntu.com/lucid/libvirt-bin> ubuntu-virt-mgmt Now when I open virt-manager the option to create guest by installing from a ISO present on hard disk locally or even PXE are greyed out.virt-manager version is 0.8.2 virsh version Compiled against library: libvir 0.7.5 Using library: libvir 0.7.5 Using API: QEMU 0.7.5 Running hypervisor: QEMU 0.12.3 This above output is wrong as instead of QEMU it should show Xen. I installed it via apt-get install libvirt-bin when you do an apt-get install libvirt-bin python-libvirt then it installs following http://packages.ubuntu.com/lucid/libvirt-bin http://packages.ubuntu.com/lucid/python-libvirt It appears it is a problem with libvirt-bin and it does not know how to create a pv-ops Dom0 guest. The machine where I am trying all this is a non VT 64 bit machine and trying to create 32 bit guests on it. Can some one confirm me the same or tell what did I missed in above? -- http://mightydreams.blogspot.com

1 0

[libvirt-users] Connecting to Standalone KVM
by Markiewicz, Patrick F (N-No Laurels) 04 Mar '11

04 Mar '11

Hi, Can virsh be used to connect to a standalone KVM? I.e. I started a KVM from the command line, and I wondered how to connect to it. Virsh list shows no VMs. Thanks. Patrick

2 2

[libvirt-users] wrong domain type for openvz
by knawnd＠gmail.com 04 Mar '11

04 Mar '11

Hi! Is there any progress on issue mentioned in [1]? I mean the issue when xml file has VM type as openvz but 'virsh dumpxml <VMID>' returns domain type qemu. I still have issue in libvirt-0.8.8. BR, Nikolay. [1] http://osdir.com/ml/libvir-list/2009-07/msg00635.html

1 0

[libvirt-users] /etc/vz/vznetctl.conf has to be /etc/vz/vznet.conf
by knawnd＠gmail.com 04 Mar '11

04 Mar '11

Hi! In [1] it's written that "Then a generic configuration file /etc/vz/vznetctl.conf must be created containing [...]" whereas it has to be /etc/vz/vznet.conf since /usr/sbin/vznetcfg script has the following line VZNETCFG='/etc/vz/vznet.conf' vzctl version is 3.0.26-1. Best regards, Nikolay. [1] http://libvirt.org/drvopenvz.html

1 0

[libvirt-users] libvirt + ESX (HTTP response code 400 for call to 'Login')
by Hereward Cooper 04 Mar '11

04 Mar '11

Hi folks, I'm trying to connect to a vSphere cluster using the information from the libvirt documentation. ------------------- $ virsh -c "vpx://root@10.51.4.11/dc1/dc1-cluster-e01/dc1-vsphere-e04/?no_verify=1" Enter root's password for 10.51.4.11: error: internal error HTTP response code 400 for call to 'Login' error: failed to connect to the hypervisor ------------------- I seem to be able to establish a connection, but it fails with a "HTTP code 400". If I provide the incorrect password it fails with a 'login credentials' error, so it looks like I am getting a connection, but it's failing for another reason. Wireshark is no help as it's all done over SSL/TLS. Any thoughts folks? I've tried various versions of libvirt up to the newest. When I put virsh into debug mode it returns this: ------------------- [snip] Enter root's password for 10.51.4.11: 15:19:09.011: debug : do_open:1249 : driver 3 ESX returned ERROR 15:19:09.011: debug : virUnrefConnect:294 : unref connection 0x98aa8f8 1 15:19:09.011: debug : virReleaseConnect:249 : release connection 0x98aa8f8 error: internal error HTTP response code 400 for call to 'Login' error: failed to connect to the hypervisor I've watched the vmware hostd.log file whilst trying to login, and it reports this error: ------------------- And the VMware hostd.log file reports this: ------------------- [2011-03-02 10:24:16.415 26AF8B90 verbose 'Proxysvc Req16870'] New proxy client SSL(TCP(local=10.4.100.26:34001, peer=10.51.4.103:443)) [2011-03-02 10:24:16.430 26933B90 error 'SoapAdapter'] Client sent us an invalid SOAP request: at line number 8, not well-formed (invalid token) ------------------- Any thoughts appreciated. Cheers. Coops.

2 3

[libvirt-users] Using dlls for Windows provided in http://libvirt.org/sources/win32_experimental/Libvirt-0.8.7-2.exe
by Schnizer, Monika 24 Feb '11

24 Feb '11

Hello libvirt-users, could anybody tell me, whether we could use dlls provided in the experimental package for windows, and distribute it with our application. We would do the following: a) Install the executable from http://libvirt.org/sources/win32_experimental/Libvirt-0.8.7-2.exe on our production machine. b) Add the dlls to the setup of our application c) Install the dlls on the customer's system in some location named /<product root>/lib. Questions: - do we violate the LGPL by doing so? - does anybody have better suggestions on how to provide the functionality to the customer? - who could tell me how to contact the copyright owners, in order to directly discuss this issue with them. Let me thank in advance for any any information. With best regards, -- Monika Schnizer Software Development FTS TSP x86 E SW4 FUJITSU Fujitsu TECHNOLOGY SOLUTIONS GmbH Domagk-Str.28, 80807 Munich, Germany Tel: +49 (89) 3222 2287 Fax: +49 (89) 3222 329 2287 Email: Monika.Schnizer(a)ts.fujitsu.com Web: http://ts.fujitsu.com<http://ts.fujitsu.com/> Company Details: de.ts.fujitsu.com/imprint.html

1 0