- Users - libvirt List Archives

[libvirt-users] Seg fault in 0.9.4-rc1
by Whit Blauvelt 29 Jul '11

29 Jul '11

Hi, Using virt-manager, asking to migrate a kvm domain from the same box virt-manager is running on to another consistently results in libvirtd faulting on the local box. Migration in the other direction, from the second box to the box virt-manager is on, works fine. A libvirtd log made with debug=1 is at http://transpect.com/debug/libvirtd_segfault.log It was doing the same thing with a recent 0.9.3 git version too. This is with virt-manager 0.9.0. Whit

2 2

[libvirt-users] qemu:///session vs qemu:///system
by Peter Thomassen 28 Jul '11

28 Jul '11

Hi, I am running several QEMU VMs on a host machine. There's different persons being responsible for different VMs. I would like to find a way to allow everybody to manage just the VMs they are assigned to (i.e. insert some ISO file, stop the machine and so on) without allowing them to disturb the other VMs. Also, I would like to allow these persons to set up new VMs (there's plenty of unallocated storage) without having to ask me (root) to do it for them, but without allowing them to delete other VMs. (Just setting user rights on the filesystem is not enough, as I use LVM volumes which are not assigned to a user in the typical sense, are they?) I know that most of this could probably be achieved by using qemu:///session instead of qemu:///system. However, I read that there's networking issue in this case (which issues precisely?), and I am also not sure if there's other disadvantages like less efficient handling in some situations by the kernel, or whatever. Is anybody there who could clarify this for me? Thank you, Peter

1 0

[libvirt-users] small webGUI?
by Stefan G. Weichinger 28 Jul '11

28 Jul '11

Greetings, at a customer we run a single VM for a specific application. Unfortunately this VM does not start automatically with the host although I checked the relevant box within virtual machine manager. I assume upgrading libvirt might help (we run 0.8.7-r1 right now, gentoo linux). Aside from that it would be good to have a simple WebGUI for the users to let them press START just in case. They run Windows on their machines so I can't give them VMM ... Could you point me at the most simple GUI to do that? I'd prefer something very lightweight without too much requirements (for example I'd like to avoid installing mysql for that ;-) ). Thank you, Stefan

1 2

[libvirt-users] with current libvirt git virsh expects vbox, refuses kvm define
by Whit Blauvelt 28 Jul '11

28 Jul '11

Okay, just installed libvirt from today's git on two Ubuntu systems. The first one went fine (except for continuation of the problem that virsh and virt-manager cannot connect to 0.8.3 systems that's been there in the 0.9.x libvirts) ... but on the second, after install, "virsh list --all" presents nothing. And: # virsh define tu1004.xml error: Failed to define domain from tu1004.xml error: internal error unexpected domain type kvm, expecting vbox These are _exactly_ the same xml files as are still working on the first system. And in both cases the new libvirt was built with defaults. Long ago the second system did have VirtualBox on it, so that may have been found while it was setting up config, but that's no good reason for KVM to fail here, right? Must be a thing with the git. Ran the 0.9.3 release built on this system previously without this problem. Whit

5 11

Re: [libvirt-users] VirtualBox headless
by Guilherme Santos 27 Jul '11

27 Jul '11

My objective is also to run headless virtual machines through libvirt library. I am using an Ubuntu 10.04 distro and libvirt 0.9.2. Before asking you guys about it, I searched on the web and found this: Hi, > > thanks for your hint. > > I read the lines in the documentation, but unfortunately editing the xml > > within virsh lead to the errors. > > The Solution to a headless domain was to edit the XML file from bash and > then > > #virsh: define <domainname.xml> > > to reload the new values for the graphics type of the machine. > > Obvioulsy something went wrong when editing "live".... > > Regards, > Christian > > Am 24.06.2010 18:27, schrieb Jean-Baptiste Rouault: > > Hi, > > > > Something like this should work, as can be seen in the > > > documentation here : http://libvirt.org/formatdomain.html#elementsGraphics > > > > <drivers> > > <graphics type='rdp' autoport='yes' /> > > > </drivers> > > > > Regards, > > > > Jean-Baptiste > > > > > >> Hello, > >> > >> I'm trying to use the VirtualBox/vbox driver together with libvirt 0.8.1 > >> on a Ubuntu Lucid Machine, VirtualBox Release 3.1. > > >> > >> The goal is to run the virtual machines headless and to connect using RDP. > >> > >> When starting a virtual domain using 'virsh start <domainname>' the GUI > >> of VirtualBox will pop up and I see no option to prevent this. If X is > > >> not running, the virsh command will terminate with 'unknown failure'. > >> > >> I've found some hints on inclusion of the headless statement in the > >> 'graphics' part of the XML definition file, but when I tree to adopt > > >> this, the editing of the file will crash. > >> > >> Has anyone achieved to manage VBox machines with libvirt on a headless > >> server ? > >> > >> Thanks in advance for some hints or experiences with this issue, > > >> Christian > >> > > Unfortunately this isn't working for me. Following is my XML configuration: <domain type='vbox'> <name>THEDOMAIN</name> <uuid>33f6e188-1479-46f4-9d90-4d5a2d3a30f2</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686'>hvm</type> <boot dev='hd'/> <boot dev='cdrom'/> </os> <features> <acpi/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> <source file='/local/vbox-shared.vdi' /> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='cdrom'> <source file='/local/ubuntu-11.04-desktop-i386.iso' /> <target dev='hdc' bus='ide'/> </disk> <interface type='user'> <mac address='08:00:27:9a:d0:63'/> <model type='Am79C973'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='rdp' autoport='yes' /> <video> <model type='vbox' vram='12' heads='1'> <acceleration accel3d='no' accel2d='no'/> </model> </video> </devices> </domain> When I run command *virsh start THEDOMAIN* it is popping up the following error message: *OpenRemoteSession/LaunchVMProcess failed, domain can't be started* As it wasn't working I also tried other options, but unfortunately, using all other graphic type options (except for 'spice', which I didn't try) the GUI is launched. I don't think I'll be needing a RDP connection, neither anything similar to that, except if these are necessary to basic management of the vm through virsh (start, stop, reboot, create and revert snapshots). Isn't there one simple way to run a virtual machine domain headless without vnc, spice or rdp servers? If not, which could be going wrong in my xml configuration? To help understanding of my desired behavior, what I need is to do through virsh what can be done using *VBoxManage startvm THEDOMAIN --headless* or *VBoxHeadless startvm THEDOMAIN*, because will use other hypervisors in the future, so it is a critical thing to me. Thanks in advance for the help, Guilherme Santos

2 1

[libvirt-users] Wanted: method for qemu hook script to know if called for migration
by Whit Blauvelt 27 Jul '11

27 Jul '11

Hi, "Before a QEMU guest is started, the qemu hook script is called" (http://libvirt.org/hooks.html) In writing a simple bash script to prevent a VM on shared storage from being started on one host if it's already running on another, it's easy enough to check if virsh on the other host reports the particular VM as "shut off" there, and go ahead if that's the case. What's I'm having trouble coming up with is a simple method to allow a migration from the second system over to the first with that script in place. As the doc says, /etc/libvirt/hooks/qemu is "Executed when a QEMU guest is started, stopped, or migrated," so when it's simply being started, it makes sense to be sure it's not already running on the second system, and prevent the start if it's not. Works fine for me. But when a migration is requested, the script is called in the same way as when it's being started. What I need is a way, from within the script, to tell whether it's a migration context, so that then the start will be allowed, despite the VM's already being running on the second system. Any ideas how to do that? Unfortunately what's passed to the script directly is just "[vmname] start begin -" in both cases. And I don't see that a separate migrate process shows up in the process tables until after getting beyond the qemu hook script. As a feature suggestion, it would be nice if that fourth input variable, currently "-", was something like "migrate" in this instance. Thanks, Whit

3 5

[libvirt-users] python-libvirt for 0.9.3 leaking file descriptors
by Igor Serebryany 27 Jul '11

27 Jul '11

i've reported this issue before, so i guess this is a regression. looks like the python bindings for 0.9.3 are leaking file descriptors: root@cloud1:~# python Python 2.6.6 (r266:84292, Dec 26 2010, 22:31:48) [GCC 4.4.5] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import libvirt >>> libvirt.getVersion() 9003 >>> def openclose(): ... c = libvirt.open('qemu:///system') ... c.close() ... >>> import os >>> os.system('lsof -p %d | wc -l' % os.getpid()) 37 >>> openclose() >>> os.system('lsof -p %d | wc -l' % os.getpid()) 40 >>> openclose() >>> os.system('lsof -p %d | wc -l' % os.getpid()) 43 every time I open and close a connection to libvirt, i loose 3 file descriptors. these are a socket and two fifo pipes. i'm using the -3 build on debian sid. can someone test this on a fedora machine? curious if this is something inside libvirt or a problem with the build... thanks, --igor

4 3

[libvirt-users] insert ISO into a KVM guest
by Jeff 27 Jul '11

27 Jul '11

There's got to be a simple way to attach an ISO to a KVM guest. I just haven't yet discovered it. I've tried adding the following stanza to my guest XML file, under the <devices> stanza and starting the guest: <disk type='file' device='cdrom'> <driver name='qemu' type='raw' /> <source file='/etc/libvirt/qemu/isos/kvm1.iso' /> <target dev='hda' bus='ide' /> <readonly /> </disk> But I get the following: error: Failed to start domain rhel6guest error: internal error process exited while connecting to monitor: char device redirected to /dev/pts/3 qemu: could not open disk image /etc/libvirt/qemu/isos/kvm1.iso: Permission denied A perms issue should be easy to address one would think, but I've tried every possible combination of perms changes including 777. Changed ownership from root to qemu:qemu (though I'm running as root). I'm not running SELinux. Anyone have any insights on how to mount a simple ISO into a KVM guest? Both at build time AND while the guest is running? Thanks Jeff

2 1

[libvirt-users] Ping not working after a migration
by Adnan Pasic 26 Jul '11

26 Jul '11

Hello guys, maybe you can help me with following issue. I have created a little cloud with a host and two worker nodes using opennebula. The setup went successfully until now, I am able to create VM's and move them via normal and live migration. Another (possibly) important information is that I configured my virtual bridge on both worker nodes like this: auto br0 iface br0 inet static address 192.168.0.[2|3] netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 #gateway 192.168.0.1 bridge_ports eth0 bridge_stp on bridge_maxwait 0 The command "brctl show" gives me following things back: bridge name bridge id STP enabled interfaces br0 8000.003005c34278 yes eth0 vnet0 (<- only appears on node with running VM) virbr0 8000.000000000000 yes According to thelibvirt wiki this setting is good as is. However, the issue I'm having is that when I create a VM and assign a static IP to it, which looks like e.g. 192.168.0.5, I firstly am able to ping this VM from both worker nodes, and also when I perform a live migration the ping stops for a few seconds (until the nodes realize the new route to this VM) and then starts pinging normally again. However, when I perform a normal migration the ping doesn't recover anymore, but answers repeatedly with: Destination Host Unreachable Do you know what could be the problem? Where is the difference between a normal and live migration and how can the ping after live migrating still work, but after a normal migration not? Thanks a lot! Regards, Adnan

1 1

[libvirt-users] Split a qcow2-image?
by Stefan G. Weichinger 26 Jul '11

26 Jul '11

Hello, I converted a W2003-Server to a vmdk-image, I didn't think too much back then ... Now I have 2 windows-drives C: and E: inside one vmdk-image-file, which was converted to qcow2. I have installed drivers and stuff into that VM already and would like to avoid to start over again with the vmdk-file -> Is there a way to split that one qcow2 into 2 separate files, one for each windows-harddisk? or plan B: can I possibly enlarge the part of C: inside that qcow2? I use qemu-kvm on gentoo linux, and libvirt-0.9.3-r1. I would appreciate any help on this topic! Thanks Stefan

2 3

[libvirt-users] Need help for Qemu-KVM
by kp chetan 26 Jul '11

26 Jul '11

2 1

[libvirt-users] VM creation using libvirtd for the qemu-KVM hypervisor
by bala suru 25 Jul '11

25 Jul '11

Hi, I have some basic doubt at the VM creation using libvirtd for the qemu-KVM hypervisor . I need to create a VM which can read the data uart/file and store/send to other VM .. How to create this kind of VM and how to write the data in/out of the VM .. I need suggestion to do this . regards Bala

1 0

Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?
by sharmila radha krishnan 22 Jul '11

22 Jul '11

Hi,  I was finally able to connect to the xenapi hypervisor.  However, once I connect to virsh and give a 'quit' command I get  "* glibc detected *** virsh: double free or corruption (fasttop):". Please find below the actual memory dump.   Note: I have disabled the SSL certificate verification in xenapi_driver.c by setting curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0) & curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0).     [root@sharmila libvirt-0.9.2]# virsh -c "xenapi://localhost" Enter username for localhost: root Enter root's password for localhost: Welcome to virsh, the virtualization interactive terminal.    Type:  'help' for help with commands        'quit' to quit    virsh # list --all  Id Name                 State ----------------------------------   0 Control domain on host: sharmila running   - Control domain on host: sharmila running   - XenServer SDK 5.6.100-47101p import shut off    virsh # quit    *** glibc detected *** virsh: double free or corruption (fasttop): 0x09fcc370 *** ======= Backtrace: ========= /lib/libc.so.6[0xb6fc56c5] /lib/libc.so.6(cfree+0x59)[0xb6fc5b09] /usr/local/lib/libvirt.so.0(virFree+0x42)[0xb760d712] /usr/local/lib/libvirt.so.0[0xb777031d] /usr/local/lib/libvirt.so.0[0xb776ec10] /usr/local/lib/libvirt.so.0[0xb7676017] /usr/local/lib/libvirt.so.0(virUnrefConnect+0x128)[0xb7677888] /usr/local/lib/libvirt.so.0(virConnectClose+0xda)[0xb769ad4a] virsh[0x8065c73] virsh[0x806672f] /lib/libc.so.6(__libc_start_main+0xdc)[0xb6f71e9c] virsh[0x804e0f1] ======= Memory map: ======== 08048000-08079000 r-xp 00000000 08:01 378273     /usr/local/bin/virsh 08079000-0807a000 rw-p 00031000 08:01 378273     /usr/local/bin/virsh 09fa1000-0a060000 rw-p 00000000 00:00 0          [heap] b6b61000-b6b6c000 r-xp 00000000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6c000-b6b6d000 rw-p 0000a000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6d000-b6b77000 r-xp 00000000 08:01 181027     /lib/libnss_files-2.5.so b6b77000-b6b78000 r--p 00009000 08:01 181027     /lib/libnss_files-2.5.so b6b78000-b6b79000 rw-p 0000a000 08:01 181027     /lib/libnss_files-2.5.so b6b81000-b6b83000 rw-p 00000000 00:00 0 b6b83000-b6d83000 r--p 00000000 08:01 447132     /usr/lib/locale/locale-archive b6d83000-b6d86000 rw-p 00000000 00:00 0 b6d86000-b6d88000 r-xp 00000000 08:01 180820     /lib/libkeyutils-1.2.so b6d88000-b6d89000 rw-p 00001000 08:01 180820     /lib/libkeyutils-1.2.so b6d89000-b6d91000 r-xp 00000000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d91000-b6d92000 rw-p 00007000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d92000-b6d99000 r-xp 00000000 08:01 182148     /lib/librt-2.5.so b6d99000-b6d9a000 r--p 00007000 08:01 182148     /lib/librt-2.5.so b6d9a000-b6d9b000 rw-p 00008000 08:01 182148     /lib/librt-2.5.so b6d9b000-b6dab000 r-xp 00000000 08:01 180816     /lib/libresolv-2.5.so b6dab000-b6dac000 r--p 0000f000 08:01 180816     /lib/libresolv-2.5.so b6dac000-b6dad000 rw-p 00010000 08:01 180816     /lib/libresolv-2.5.so b6dad000-b6daf000 rw-p 00000000 00:00 0 b6daf000-b6ddf000 r-xp 00000000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6ddf000-b6de0000 rw-p 0002f000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6de0000-b6de1000 rw-p 00000000 00:00 0 b6de1000-b6de3000 r-xp 00000000 08:01 180823     /lib/libcom_err.so.2.1 b6de3000-b6de4000 rw-p 00001000 08:01 180823     /lib/libcom_err.so.2.1 b6de4000-b6e0a000 r-xp 00000000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0a000-b6e0b000 rw-p 00025000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0b000-b6e9f000 r-xp 00000000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6e9f000-b6ea2000 rw-p 00093000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6ea2000-b6ece000 r-xp 00000000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ece000-b6ecf000 rw-p 0002c000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ecf000-b6ed2000 r-xp 00000000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed2000-b6ed3000 rw-p 00002000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed3000-b6ed4000 rw-p 00000000 00:00 0 b6ed4000-b6f0f000 r-xp 00000000 08:01 182149     /lib/libsepol.so.1 b6f0f000-b6f10000 rw-p 0003b000 08:01 182149     /lib/libsepol.so.1 b6f10000-b6f1a000 rw-p 00000000 00:00 0 b6f1a000-b6f5a000 r-xp 00000000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5a000-b6f5b000 rw-p 00040000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5b000-b6f5c000 rw-p 00000000 00:00 0 b6f5c000-b70af000 r-xp 00000000 08:01 180994     /lib/libc-2.5.so b70af000-b70b1000 r--p 00153000 08:01 180994     /lib/libc-2.5.so b70b1000-b70b2000 rw-p 00155000 08:01 180994     /lib/libc-2.5.so b70b2000-b70b5000 rw-p 00000000 00:00 0 b70b5000-b70b8000 r-xp 00000000 08:01 180979     /lib/libdl-2.5.so b70b8000-b70b9000 r--p 00002000 08:01 180979     /lib/libdl-2.5.so b70b9000-b70ba000 rw-p 00003000 08:01 180979     /lib/libdl-2.5.so b70ba000-b70e1000 r-xp 00000000 08:01 182017     /lib/libm-2.5.so b70e1000-b70e2000 r--p 00026000 08:01 182017     /lib/libm-2.5.so b70e2000-b70e3000 rw-p 00027000 08:01 182017     /lib/libm-2.5.so b70e3000-b70e4000 rw-p 00000000 00:00 0 b70e4000-b70f6000 r-xp 00000000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f6000-b70f7000 rw-p 00011000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f7000-b7223000 r-xp 00000000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7223000-b7228000 rw-p 0012c000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7228000-b7229000 rw-p 00000000 00:00 0 b7229000-b723e000 r-xp 00000000 08:01 181033     /lib/libpthread-2.5.so b723e000-b723f000 r--p 00015000 08:01 181033     /lib/libpthread-2.5.so b723f000-b7240000 rw-p 00016000 08:01 181033     /lib/libpthread-2.5.so b7240000-b7242000 rw-p 00000000 00:00 0 b7242000-b7258000 r-xp 00000000 08:01 181005     /lib/libselinux.so.1 b7258000-b725a000 rw-p 00015000 08:01 181005     /lib/libselinux.so.1 b725a000-b7389000 r-xp 00000000 08:01 182129     /lib/libcrypto.so.0.9.8e b7389000-b739c000 rw-p 0012e000 08:01 182129     /lib/libcrypto.so.0.9.8e b739c000-b73a0000 rw-p 00000000 00:00 0 b73a0000-b73e4000 r-xp 00000000 08:01 180822     /lib/libssl.so.0.9.8e b73e4000-b73e8000 rw-p 00043000 08:01 180822     /lib/libssl.so.0.9.8e b73e8000-b7419000 r-xp 00000000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b7419000-b741a000 rw-p 00031000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b741a000-b741b000 rw-p 00000000 00:00 0 b741b000-b747b000 r-xp 00000000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747b000-b747f000 rw-p 00060000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747f000-b74a3000 r-xp 00000000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a3000-b74a4000 rw-p 00024000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a4000-b74a8000 r-xp 00000000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a8000-b74a9000 rw-p 00003000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a9000-b74ac000 rw-p 00000000 00:00 0 b74ac000-b752a000 r-xp 00000000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752a000-b752d000 rw-p 0007d000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752d000-b75a6000 r-xp 00000000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75a6000-b75ac000 rw-p 00078000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75ac000-b75ad000 rw-p 00000000 00:00 0 b75ad000-b75cc000 r-xp 00000000 08:01 180978     /lib/libdevmapper.so.1.02 b75cc000-b75ce000 rw-p 0001e000 08:01 180978     /lib/libdevmapper.so.1.02 b75cf000-b75d6000 r--s 00000000 08:01 412913     /usr/lib/gconv/gconv-modules.cache b75d6000-b75d7000 r-xp 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2 b75d7000-b75d8000 rw-p 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2Aborted    Moreover, Iam not able to start any VMs uisng xencenter after i have started using virsh. It says,  Error: Starting VM 'XenServer SDK 5.6.100-47101p import' - Internal error: another frontend device is already connected to this domain (frontend (domid=0 | kind=vbd | devid=51712); backend (domid=0 | kind=vbd | devid=51712)). Even a reboot of the machine didnt help.   Any pointers on the above 2 issues would be of great help.   Thanks in Advance!   Regards, Sharmila   From: "G Naresh Kumar"naresh.gadepalli(a)gmail.com Sent: Sat, 16 Jul 2011 16:55:16 +0530 To: Matthias Bolte matthias.bolte(a)googlemail.com Cc: libvirt-users(a)redhat.com Subject: Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?   Hi Matthias, > Sorry for the confusion.It was an edited one & hence thetypo. Below is the actual output: # virsh -c xenapi://<myip> Enter username for <myip>: root Enter root's password for <myip>: error: authentication failed: (null) I was not able to get anything in the Xen logs. Somehowfigured out to print the Xen error using the patch given at the link http://osdir.com/ml/libvir- list/2011-06/msg00298.html. It prints"TRANSPORT_FAULT". Any pointers to this error would be much appreciated. Iam also trying to debugthis issue. As per your suggestion, I had used make rpm. But it requires xen-devel pacakge,which I was not able to get for Xen 3.4.2. Is there any way where I canuse the source package and build & install the library without using'make rpm' ? Thanks for all the help. > Regards Naresh > On Thu, Jul 14, 2011 at 7:07 PM, Matthias Bolte <matthias.bolte(a)googlemail.com> wrote: > 2011/7/14 G Naresh Kumar <naresh.gadepalli(a)gmail.com>: >> Hi Maththias, > > Thanks for the help. I finally was able to compile/install libvirt on >> xenserver. >> >> I tried compiling the libvirt 0.9.2 with xen api support. Was able to >> install it successfully. When I tried giving the virsh command, I got an >> ‘authentication failed’ error as shown below. >> >> # virsh -c xenapi://<my local ip> >> Enter username for <mylocalip>: root > >Here you entered root > >> Enter intel123's password for <my local ip>: > >but here it asks for intel123's, that's unexpected. Did you edit this >one before mailing it, or is there really this mismatch? > >> error: authentication failed: (null) > >Outputting (null) here is actually a bug. The only way this can happen >is when the login attempt fails but the XenServer doesn't provide an >error message. Maybe have a look at the XenServer logs to see if it >says something about a failed login attempt. > >> I also tried connecting to the local machine as below, >> >> virsh -c "xenapi:///" >> error: authentication failed: Server name not in URI >> error: failed to connect to the hypervisor > >The XenAPI driver expects a server name. xenapi:/// _could_ be treated >as xenapi://localhost, but it's not implemented that way. > >> Also I am trying to install ruby-libvirt on xenserver, which looks like >> requires libvirt-devel package to be installed. How do I build it from the >> libvirt 0.9.2 source package. > >Running 'make rpm' should build an libvirt-devel RPM package for you. > >> Thanks, >> >> Naresh >> >> On Wed, Jun 15, 2011 at 8:19 PM, Matthias Bolte >> <matthias.bolte(a)googlemail.com> wrote: >>> >>> 2011/6/15 G Naresh Kumar <naresh.gadepalli(a)gmail.com>: >>> > Hi Maththias, >>> > >>> > Thanks a lot for your response!. >>> > >>> > Is there a specific version of libvirt from which xenserver support is >>> > added? I am getting the below error >>> > >>> > "error: invalid argument in libvirt was built without the 'xenapi' >>> > driver" >>> >>> The means that your libvirt version is new enough and contains the >>> XenAPI driver but that it was disabled on configure time, probably >>> because the build server didn't have libxenserver installed and >>> libvirt's configure script automatically disabled the driver because >>> of a missing dependency. >>> >>> > I have installed libvirt from citrix yum repo. >>> >>> Then Citrix build libvirt without XenAPI support. As a long term >>> solution you could report to whom ever is responsible for that repo >>> and request to enabled XenAPI support in that libvirt package. As a >>> short term solution you could build libvirt from source yourself and >>> make sure to get the XenAPI driver enabled. >>> >>> > I am using Xenserver 5.5 with libvirt 0.8.2 and it does not seem to be >>> > working. >>> >>> According to http://libvirt.org/hvsupport.html and the error message >>> 0.8.2 is new enough. >>> >>> Matthias >>> >>> > Thanks, >>> > >>> > Naresh >>> > >>> > On Jun 15, 2011 7:03 PM, "Matthias Bolte" >>> > <matthias.bolte(a)googlemail.com> >>> > wrote: >>> >> 2011/6/15 G Naresh Kumar <naresh.gadepalli(a)gmail.com>: >>> >>> Hi, >>> >>> Is libvirt supported on Citrix Xenserver. I have been searching for >>> >>> the >>> >>> same >>> >>> with little/no luck. >>> >>> If supported, can you point to some links/documents which can help me >>> >>> try >>> >>> out the same. >>> >>> Thanks, >>> >>> Naresh >>> >> >>> >> libvirt can use XenAPI via libxenserver [1]. That should allow you to >>> >> use libvirt with a Citrix XenServer. You can use virsh like this >>> >> assuming you have a libxenserver enabled libvirt: >>> >> >>> >> virsh -c xenapi://my-xen-server >>> >> >>> >> But it's true, there is no documentation about this on the libvirt >>> >> website >>> >> yet. >>> >> >>> >> [1] http://community.citrix.com/display/xs/Download+SDKs >>> >> >>> >> -- >>> >> Matthias Bolte >>> >> http://photron.blogspot.com >>> > >> -- >> I was an atheist till I realized I am GOD >> > >-- > Matthias Bolte >http://photron.blogspot.com > >   >-- >I was an atheist till I realized I am GOD >_______________________________________________ >libvirt-users mailing list >libvirt-users(a)redhat.com >https://www.redhat.com/mailman/listinfo/libvirt-users

2 1

[libvirt-users] Is libvirt supported on Citrix Xenserver?
by G Naresh Kumar 21 Jul '11

21 Jul '11

Hi, Is libvirt supported on Citrix Xenserver. I have been searching for the same with little/no luck. If supported, can you point to some links/documents which can help me try out the same. Thanks, Naresh

2 7

[libvirt-users] problem w/ libvirt-0.8.2-15.el5 and CentOS
by Jim Glennon 21 Jul '11

21 Jul '11

I am running the Eucalyptus 2.0 cloud computing platform on an up-to-date CentOS 5 using the xen hypervisor. While attempting to attach a volume successfully created using jclouds with eucalyptus to a running VM instance, I encountered the following error: libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) i also tried attaching manually (i.e. euca-atttach-volume) and experienced the same failure. i found this discussion which mentions a possible libvirt/xen problem: https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=662908 however it does not appear that the fix is available for public consumption (at least i couldn't find it). from the Eucalyptus nc.log: [Tue Jul 19 22:16:47 2011][005714][EUCAINFO ] doAttachVolume() invoked (id=i-4DA80924 vol=vol-59CF0630 remote=/dev/etherd/e0.12 local=/dev/sda2) [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] AttachVolume() failed (err=-1) XML= [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] ERROR: doAttachVolume() failed error=1

1 0

[libvirt-users] Migrate failed
by zhang xintao 20 Jul '11

20 Jul '11

Dear All； I try to migrate a kvm guset os from Host A to Host B,but failed ================================================ Host OS : Ubuntu 11.04 server Using libvirt 0.8.8 Using API:QEMU 0.8.8 Running hypervisor:QEMU 0.14.0 =============================================== virsh migrate --live winxp quem+ssh://192.168.10.3/system root(a)192.168.10.3's password: error:operation failed:migration to 'tcp:Host B:49156' failed:migration failed =============================================== read libvirt.org FAQ,add --tunnelled FLAG ================================ virsh migrate --live --tunnelled winxp qume+ssh://192.168.10.3/system root(a)192.168.10.'s password: error: Requested operation is not vaild:cannot perform tunnelled migration without using peer2peer flag ================================================ add p2p flag ================================================ virsh migrate --live --tunnelled winxp qume+ssh://192.168.10.3/system root(a)192.168.10.'s password: error:operation failed:Failed to connect to remote libvirt URI quem+ssh://192.168.10.3/system who can help me ?

1 0

[libvirt-users] cannot perform tunnelled migration without using peer2peer flag
by zhang xintao 19 Jul '11

19 Jul '11

Dear All I try to migration a kvm guest os to another host failed server: ubuntu 11.04 server virsh:migrate --live --tunnelled vm1 qemu+ssh://192.168.10.3/system error:Requested operation is not valid:cannot perform tunnelled migration without using peer2peer flag

5 7

Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?
by sharmila radha krishnan 19 Jul '11

19 Jul '11

Hi,  I was finally able to connect to the xenapi hypervisor using virsh of libvirt 0.9.2.  However, once I connect to virsh and give a 'quit' command I get  "* glibc detected *** virsh: double free or corruption (fasttop):". Please find below the actual memory dump.   Note: I have disabled the SSL certificate verification in xenapi_driver.c by setting curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0) & curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0).     [root@sharmila libvirt-0.9.2]# virsh -c "xenapi://localhost" Enter username for localhost: root Enter root's password for localhost: Welcome to virsh, the virtualization interactive terminal.    Type:  'help' for help with commands        'quit' to quit    virsh # list --all  Id Name                 State ----------------------------------   0 Control domain on host: sharmila running   - Control domain on host: sharmila running   - XenServer SDK 5.6.100-47101p import shut off    virsh # quit    *** glibc detected *** virsh: double free or corruption (fasttop): 0x09fcc370 *** ======= Backtrace: ========= /lib/libc.so.6[0xb6fc56c5] /lib/libc.so.6(cfree+0x59)[0xb6fc5b09] /usr/local/lib/libvirt.so.0(virFree+0x42)[0xb760d712] /usr/local/lib/libvirt.so.0[0xb777031d] /usr/local/lib/libvirt.so.0[0xb776ec10] /usr/local/lib/libvirt.so.0[0xb7676017] /usr/local/lib/libvirt.so.0(virUnrefConnect+0x128)[0xb7677888] /usr/local/lib/libvirt.so.0(virConnectClose+0xda)[0xb769ad4a] virsh[0x8065c73] virsh[0x806672f] /lib/libc.so.6(__libc_start_main+0xdc)[0xb6f71e9c] virsh[0x804e0f1] ======= Memory map: ======== 08048000-08079000 r-xp 00000000 08:01 378273     /usr/local/bin/virsh 08079000-0807a000 rw-p 00031000 08:01 378273     /usr/local/bin/virsh 09fa1000-0a060000 rw-p 00000000 00:00 0          [heap] b6b61000-b6b6c000 r-xp 00000000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6c000-b6b6d000 rw-p 0000a000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6d000-b6b77000 r-xp 00000000 08:01 181027     /lib/libnss_files-2.5.so b6b77000-b6b78000 r--p 00009000 08:01 181027     /lib/libnss_files-2.5.so b6b78000-b6b79000 rw-p 0000a000 08:01 181027     /lib/libnss_files-2.5.so b6b81000-b6b83000 rw-p 00000000 00:00 0 b6b83000-b6d83000 r--p 00000000 08:01 447132     /usr/lib/locale/locale-archive b6d83000-b6d86000 rw-p 00000000 00:00 0 b6d86000-b6d88000 r-xp 00000000 08:01 180820     /lib/libkeyutils-1.2.so b6d88000-b6d89000 rw-p 00001000 08:01 180820     /lib/libkeyutils-1.2.so b6d89000-b6d91000 r-xp 00000000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d91000-b6d92000 rw-p 00007000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d92000-b6d99000 r-xp 00000000 08:01 182148     /lib/librt-2.5.so b6d99000-b6d9a000 r--p 00007000 08:01 182148     /lib/librt-2.5.so b6d9a000-b6d9b000 rw-p 00008000 08:01 182148     /lib/librt-2.5.so b6d9b000-b6dab000 r-xp 00000000 08:01 180816     /lib/libresolv-2.5.so b6dab000-b6dac000 r--p 0000f000 08:01 180816     /lib/libresolv-2.5.so b6dac000-b6dad000 rw-p 00010000 08:01 180816     /lib/libresolv-2.5.so b6dad000-b6daf000 rw-p 00000000 00:00 0 b6daf000-b6ddf000 r-xp 00000000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6ddf000-b6de0000 rw-p 0002f000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6de0000-b6de1000 rw-p 00000000 00:00 0 b6de1000-b6de3000 r-xp 00000000 08:01 180823     /lib/libcom_err.so.2.1 b6de3000-b6de4000 rw-p 00001000 08:01 180823     /lib/libcom_err.so.2.1 b6de4000-b6e0a000 r-xp 00000000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0a000-b6e0b000 rw-p 00025000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0b000-b6e9f000 r-xp 00000000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6e9f000-b6ea2000 rw-p 00093000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6ea2000-b6ece000 r-xp 00000000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ece000-b6ecf000 rw-p 0002c000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ecf000-b6ed2000 r-xp 00000000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed2000-b6ed3000 rw-p 00002000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed3000-b6ed4000 rw-p 00000000 00:00 0 b6ed4000-b6f0f000 r-xp 00000000 08:01 182149     /lib/libsepol.so.1 b6f0f000-b6f10000 rw-p 0003b000 08:01 182149     /lib/libsepol.so.1 b6f10000-b6f1a000 rw-p 00000000 00:00 0 b6f1a000-b6f5a000 r-xp 00000000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5a000-b6f5b000 rw-p 00040000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5b000-b6f5c000 rw-p 00000000 00:00 0 b6f5c000-b70af000 r-xp 00000000 08:01 180994     /lib/libc-2.5.so b70af000-b70b1000 r--p 00153000 08:01 180994     /lib/libc-2.5.so b70b1000-b70b2000 rw-p 00155000 08:01 180994     /lib/libc-2.5.so b70b2000-b70b5000 rw-p 00000000 00:00 0 b70b5000-b70b8000 r-xp 00000000 08:01 180979     /lib/libdl-2.5.so b70b8000-b70b9000 r--p 00002000 08:01 180979     /lib/libdl-2.5.so b70b9000-b70ba000 rw-p 00003000 08:01 180979     /lib/libdl-2.5.so b70ba000-b70e1000 r-xp 00000000 08:01 182017     /lib/libm-2.5.so b70e1000-b70e2000 r--p 00026000 08:01 182017     /lib/libm-2.5.so b70e2000-b70e3000 rw-p 00027000 08:01 182017     /lib/libm-2.5.so b70e3000-b70e4000 rw-p 00000000 00:00 0 b70e4000-b70f6000 r-xp 00000000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f6000-b70f7000 rw-p 00011000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f7000-b7223000 r-xp 00000000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7223000-b7228000 rw-p 0012c000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7228000-b7229000 rw-p 00000000 00:00 0 b7229000-b723e000 r-xp 00000000 08:01 181033     /lib/libpthread-2.5.so b723e000-b723f000 r--p 00015000 08:01 181033     /lib/libpthread-2.5.so b723f000-b7240000 rw-p 00016000 08:01 181033     /lib/libpthread-2.5.so b7240000-b7242000 rw-p 00000000 00:00 0 b7242000-b7258000 r-xp 00000000 08:01 181005     /lib/libselinux.so.1 b7258000-b725a000 rw-p 00015000 08:01 181005     /lib/libselinux.so.1 b725a000-b7389000 r-xp 00000000 08:01 182129     /lib/libcrypto.so.0.9.8e b7389000-b739c000 rw-p 0012e000 08:01 182129     /lib/libcrypto.so.0.9.8e b739c000-b73a0000 rw-p 00000000 00:00 0 b73a0000-b73e4000 r-xp 00000000 08:01 180822     /lib/libssl.so.0.9.8e b73e4000-b73e8000 rw-p 00043000 08:01 180822     /lib/libssl.so.0.9.8e b73e8000-b7419000 r-xp 00000000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b7419000-b741a000 rw-p 00031000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b741a000-b741b000 rw-p 00000000 00:00 0 b741b000-b747b000 r-xp 00000000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747b000-b747f000 rw-p 00060000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747f000-b74a3000 r-xp 00000000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a3000-b74a4000 rw-p 00024000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a4000-b74a8000 r-xp 00000000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a8000-b74a9000 rw-p 00003000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a9000-b74ac000 rw-p 00000000 00:00 0 b74ac000-b752a000 r-xp 00000000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752a000-b752d000 rw-p 0007d000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752d000-b75a6000 r-xp 00000000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75a6000-b75ac000 rw-p 00078000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75ac000-b75ad000 rw-p 00000000 00:00 0 b75ad000-b75cc000 r-xp 00000000 08:01 180978     /lib/libdevmapper.so.1.02 b75cc000-b75ce000 rw-p 0001e000 08:01 180978     /lib/libdevmapper.so.1.02 b75cf000-b75d6000 r--s 00000000 08:01 412913     /usr/lib/gconv/gconv-modules.cache b75d6000-b75d7000 r-xp 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2 b75d7000-b75d8000 rw-p 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2Aborted    Moreover, Iam not able to start any VMs uisng xencenter after i have started using virsh. It says,  Error: Starting VM 'XenServer SDK 5.6.100-47101p import' - Internal error: another frontend device is already connected to this domain (frontend (domid=0 | kind=vbd | devid=51712); backend (domid=0 | kind=vbd | devid=51712)). Even a reboot of the machine didnt help.   Any pointers on the above 2 issues would be of great help.   Thanks in Advance!   Regards, SharmilaFrom: "G Naresh Kumar"naresh.gadepalli(a)gmail.comSent: Sat, 16 Jul 2011 16:55:16 +0530To: Matthias Bolte matthias.bolte(a)googlemail.comCc: libvirt-users(a)redhat.comSubject: Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?Hi Matthias, > Sorry for the confusion.It was an edited one & hence thetypo. Below is the actual output: # virsh -c xenapi://<myip> Enter username for <myip>: root Enter root's password for <myip>: error: authentication failed: (null) I was not able to get anything in the Xen logs. Somehowfigured out to print the Xen error using the patch given at the link http://osdir.com/ml/libvir- list/2011-06/msg00298.html. It prints"TRANSPORT_FAULT". Any pointers to this error would be much appreciated. Iam also trying to debugthis issue. As per your suggestion, I had used make rpm. But it requires xen-devel pacakge,which I was not able to get for Xen 3.4.2. Is there any way where I canuse the source package and build & install the library without using'make rpm' ? Thanks for all the help. > Regards Naresh> On Thu, Jul 14, 2011 at 7:07 PM, Matthias Bolte <matthias.bolte(a)googlemail.com> wrote:> 2011/7/14 G Naresh Kumar <naresh.gadepalli@gmail.com>:>> Hi Maththias,> > Thanks for the help. I finally was able to compile/install libvirt on>> xenserver.>>>> I tried compiling the libvirt 0.9.2 with xen api support. Was able to>> install it successfully. When I tried giving the virsh command, I got an>> ‘authentication failed’ error as shown below.>>>> # virsh -c xenapi://<my local ip>>> Enter username for <mylocalip>: root>>Here you entered root> >> Enter intel123's password for <my local ip>:>>but here it asks for intel123's, that's unexpected. Did you edit this>one before mailing it, or is there really this mismatch?>>> error: authentication failed: (null)>>Outputting (null) here is actually a bug. The only way this can happen>is when the login attempt fails but the XenServer doesn't provide an>error message. Maybe have a look at the XenServer logs to see if it>says something about a failed login attempt.> >> I also tried connecting to the local machine as below,>>>> virsh -c "xenapi:///">> error: authentication failed: Server name not in URI>> error: failed to connect to the hypervisor>>The XenAPI driver expects a server name. xenapi:/// _could_ be treated>as xenapi://localhost, but it's not implemented that way.> >> Also I am trying to install ruby-libvirt on xenserver, which looks like>> requires libvirt-devel package to be installed. How do I build it from the>> libvirt 0.9.2 source package.>>Running 'make rpm' should build an libvirt-devel RPM package for you.> >> Thanks,>>>> Naresh>>>> On Wed, Jun 15, 2011 at 8:19 PM, Matthias Bolte>> <matthias.bolte(a)googlemail.com> wrote:>>>>>> 2011/6/15 G Naresh Kumar <naresh.gadepalli@gmail.com>:>>> > Hi Maththias,>>> >>>> > Thanks a lot for your response!.>>> >>>> > Is there a specific version of libvirt from which xenserver support is>>> > added? I am getting the below error>>> >>>> > "error: invalid argument in libvirt was built without the 'xenapi'>>> > driver">>>>>> The means that your libvirt version is new enough and contains the>>> XenAPI driver but that it was disabled on configure time, probably>>> because the build server didn't have libxenserver installed and>>> libvirt's configure script automatically disabled the driver because>>> of a missing dependency.&g! t;>>>>> > I have installed libvirt from citrix yum repo.>>>>>> Then Citrix build libvirt without XenAPI support. As a long term>>> solution you could report to whom ever is responsible for that repo>>> and request to enabled XenAPI support in that libvirt package. As a>>> short term solution you could build libvirt from source yourself and>>> make sure to get the XenAPI driver enabled.>>>>>> > I am using Xenserver 5.5 with libvirt 0.8.2 and it does not seem to be>>> > working.>>>>>> According to http://libvirt.org/hvsupport.html and the error message>>> 0.8.2 is new enough.>>>>>> Matthias>>>>>> > Thanks,>>> >>>> > Naresh>>> >>>> > On Jun 15, 2011 7:03 PM, "Matthias Bolte">>> > <matthias.bolte(a)googlemail.com>>>> > wrote:>>&g! t; >> 2011/6/15 G Naresh Kumar <naresh.gadepalli@gmai! l.com>:>>> >>> Hi,>>> >>> Is libvirt supported on Citrix Xenserver. I have been searching for>>> >>> the>>> >>> same>>> >>> with little/no luck.>>> >>> If supported, can you point to some links/documents which can help me>>> >>> try>>> >>> out the same.>>> >>> Thanks,>>> >>> Naresh>>> >>>>> >> libvirt can use XenAPI via libxenserver [1]. That should allow you to>>> >> use libvirt with a Citrix XenServer. You can use virsh like this>>> >> assuming you have a libxenserver enabled libvirt:>>> >>>>> >> virsh -c xenapi://my-xen-server>>> >>>>> >> But it's true, there is no documentation about this on the libvirt>>> >> website>>> >> yet.>>> &gt! ;>>>> >> [1] http://community.citrix.com/display/xs/Download+SDKs>>> >>>>> >> -->>> >> Matthias Bolte>>> >> http://photron.blogspot.com>>> >>> -->> I was an atheist till I realized I am GOD>>>>--> Matthias Bolte>http://photron.blogspot.com>>>-- >I was an atheist till I realized I am GOD>_______________________________________________>libvirt-users mailing list>libvirt-users@redhat.com>https://www.redhat.com/mailman/listinfo/libvirt-users

1 0

[libvirt-users] Migrate KVM Guest OS failed
by zhang xintao 18 Jul '11

18 Jul '11

Dear All I used Virsh live Migrate KVM Guest OS failed error: unable to set user and group to '104:106' on '/mnt/run2/N2-WINDOWS-XP-1':Invalid argument /mnt/run2/ is a directory of local nfs server another host using nfs client share this directory

2 1

[libvirt-users] [libvirt] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.3 release
by Daniel P. Berrange 15 Jul '11

15 Jul '11

I am happy to announce a new release[1] of the libvirt Perl bindings, Sys::Virt 0.9.3 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.9.3.tar.gz Changes in this release - Add all new APIs in libvirt 0.9.3 - Requires libvirt >= 0.9.3 The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc. I am now caught up to main libvirt releases and intended to track each new release more promptly in the future. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt-users] Unable to start libvirtd 0.9.3 on Ubuntu 10.10
by Heath Petersen 13 Jul '11

13 Jul '11

I just built libvirt 0.9.3 on my Ubuntu 10.10 box. It appears to have built correctly. When I try "virsh -c qemu:///session list --all" I get the following: error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor After that, libvirtd isn't running as user heath as it did when I was using 0.9.2. When I run it with LIBVIRT_DEBUG=1 I get this: . . . 22:26:34.334: 8385: debug : remoteOpen:774 : Auto-spawn user daemon instance 22:26:34.334: 8385: debug : doRemoteOpen:487 : proceeding with name = qemu:///session 22:26:34.334: 8385: debug : doRemoteOpen:497 : Connecting with transport 1 22:26:34.378: 8385: debug : doRemoteOpen:544 : Proceeding with sockname @/home/heath/.libvirt/libvirt-sock 22:26:34.378: 8385: debug : virCommandRunAsync:1874 : About to run LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30 22:26:34.378: 8385: debug : virCommandRunAsync:1890 : Command result 0, with PID 8386 22:26:34.379: 8385: debug : virCommandRun:1711 : Result status 0, stdout: '(null)' stderr: '(null)' 22:26:55.430: 8385: debug : do_open:1059 : driver 7 remote returned ERROR 22:26:55.430: 8385: debug : virUnrefConnect:145 : unref connection 0x8451840 1 22:26:55.430: 8385: debug : virReleaseConnect:94 : release connection 0x8451840 error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor I then proceeded to try to start libvirtd manually with "LIBVIRT_DEBUG=1 LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30". I got a return code of 1 with the following output: 22:29:33.295: 8389: info : libvirt version: 0.9.3 22:29:33.295: 8389: debug : virInitialize:412 : register drivers 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x3745e0 name=Test 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Test as driver 0 22:29:33.295: 8389: debug : virRegisterNetworkDriver:584 : registering Test as network driver 0 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering Test as interface driver 0 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering Test as storage driver 0 22:29:33.295: 8389: debug : virRegisterDeviceMonitor:683 : registering Test as device driver 0 22:29:33.295: 8389: debug : virRegisterSecretDriver:716 : registering Test as secret driver 0 22:29:33.295: 8389: debug : virRegisterNWFilterDriver:749 : registering Test as network filter driver 0 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x374fa0 name=Xen 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Xen as driver 1 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375720 name=OPENVZ 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering OPENVZ as driver 2 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375920 name=VMWARE 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering VMWARE as driver 3 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375420 name=PHYP 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering PHYP as driver 4 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering PHYP as storage driver 1 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering PHYP as interface driver 1 22:29:33.324: 8389: debug : tryLoadOne:163 : Found VBoxXPCOMC.so in '/usr/lib/virtualbox' 22:29:33.324: 8389: debug : vboxRegister:94 : VBoxCGlueInit found API version: 4.0.10 (4000010) 22:29:33.324: 8389: debug : vboxRegister:121 : VirtualBox API version: 4.0 22:29:33.324: 8389: debug : virRegisterDriver:767 : driver=0x376920 name=VBOX 22:29:33.324: 8389: debug : virRegisterDriver:791 : registering VBOX as driver 5 22:29:33.324: 8389: debug : virRegisterNetworkDriver:584 : registering VBOX as network driver 1 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering VBOX as storage driver 2 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x376c20 name=ESX 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering ESX as driver 6 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering ESX as interface driver 2 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering ESX as network driver 2 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering ESX as storage driver 3 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering ESX as device driver 1 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering ESX as secret driver 1 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering ESX as network filter driver 1 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x374a00 name=remote 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering remote as driver 7 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering remote as network driver 3 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering remote as interface driver 3 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering remote as storage driver 4 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering remote as device driver 2 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering remote as secret driver 2 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering remote as network filter driver 2 Any idea why libvirtd won't run? -- ---------- If you want to send stuff to the bit bucket, email Phineas.Ferb(a)Kandre.com .

2 1

[libvirt-users] Problem starting libvirtd 0.9.3 on Ubuntu
by Heath Petersen 13 Jul '11

13 Jul '11

I just built libvirt 0.9.3 from scratch on my Ubuntu 10.10 system. It appeared to build and install correctly. When running a command like 'virsh -c qemu:///session list --all', I get the following: error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor When looking into it, I realized libvirtd was not running as user heath after the command. Running it with LIBVIRT_DEBUG=1, I get: ... 22:26:34.334: 8385: debug : remoteOpen:774 : Auto-spawn user daemon instance 22:26:34.334: 8385: debug : doRemoteOpen:487 : proceeding with name = qemu:///session 22:26:34.334: 8385: debug : doRemoteOpen:497 : Connecting with transport 1 22:26:34.378: 8385: debug : doRemoteOpen:544 : Proceeding with sockname @/home/heath/.libvirt/libvirt-sock 22:26:34.378: 8385: debug : virCommandRunAsync:1874 : About to run LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30 22:26:34.378: 8385: debug : virCommandRunAsync:1890 : Command result 0, with PID 8386 22:26:34.379: 8385: debug : virCommandRun:1711 : Result status 0, stdout: '(null)' stderr: '(null)' 22:26:55.430: 8385: debug : do_open:1059 : driver 7 remote returned ERROR 22:26:55.430: 8385: debug : virUnrefConnect:145 : unref connection 0x8451840 1 22:26:55.430: 8385: debug : virReleaseConnect:94 : release connection 0x8451840 error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor I then tried to start libvirtd manually with 'LIBVIRT_DEBUG=1 LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30', just like it appears virsh is trying to do. I get a return code of 1 with the following output: 22:29:33.295: 8389: info : libvirt version: 0.9.3 22:29:33.295: 8389: debug : virInitialize:412 : register drivers 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x3745e0 name=Test 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Test as driver 0 22:29:33.295: 8389: debug : virRegisterNetworkDriver:584 : registering Test as network driver 0 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering Test as interface driver 0 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering Test as storage driver 0 22:29:33.295: 8389: debug : virRegisterDeviceMonitor:683 : registering Test as device driver 0 22:29:33.295: 8389: debug : virRegisterSecretDriver:716 : registering Test as secret driver 0 22:29:33.295: 8389: debug : virRegisterNWFilterDriver:749 : registering Test as network filter driver 0 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x374fa0 name=Xen 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Xen as driver 1 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375720 name=OPENVZ 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering OPENVZ as driver 2 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375920 name=VMWARE 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering VMWARE as driver 3 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375420 name=PHYP 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering PHYP as driver 4 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering PHYP as storage driver 1 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering PHYP as interface driver 1 22:29:33.324: 8389: debug : tryLoadOne:163 : Found VBoxXPCOMC.so in '/usr/lib/virtualbox' 22:29:33.324: 8389: debug : vboxRegister:94 : VBoxCGlueInit found API version: 4.0.10 (4000010) 22:29:33.324: 8389: debug : vboxRegister:121 : VirtualBox API version: 4.0 22:29:33.324: 8389: debug : virRegisterDriver:767 : driver=0x376920 name=VBOX 22:29:33.324: 8389: debug : virRegisterDriver:791 : registering VBOX as driver 5 22:29:33.324: 8389: debug : virRegisterNetworkDriver:584 : registering VBOX as network driver 1 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering VBOX as storage driver 2 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x376c20 name=ESX 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering ESX as driver 6 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering ESX as interface driver 2 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering ESX as network driver 2 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering ESX as storage driver 3 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering ESX as device driver 1 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering ESX as secret driver 1 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering ESX as network filter driver 1 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x374a00 name=remote 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering remote as driver 7 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering remote as network driver 3 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering remote as interface driver 3 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering remote as storage driver 4 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering remote as device driver 2 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering remote as secret driver 2 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering remote as network filter driver 2 Any ideas why libvirtd isn't starting? -- ---------- If you want to send stuff to the bit bucket, email Phineas.Ferb(a)Kandre.com .

1 0

[libvirt-users] virt-manager/libvirt backwards compatibility problem?
by Whit Blauvelt 13 Jul '11

13 Jul '11

Hi, Wanting to test some recent features of libvirt, I installed 0.9.3 on a couple of systems. It works fine on those, but since upgrading neither of them can successfully connect with virt-manager or virsh to a couple of other systems running libvirt 0.8.3. Even after upgrading virt-manager and virtinst to the latest versions on the 0.9.3 systems, they fail like this in virt-manager: Unable to open a connection to the libvirt management daemon. Libvirt URI is: qemu+ssh://root@192.168.1.67/system Verify that: - The 'libvirtd' daemon has been started Cannot recv data: : Connection reset by peer Traceback (most recent call last): File "/usr/src/virt-manager-0.8.7/src/virtManager/connection.py", line 1055, in _try_open None], flags) File "/usr/local/lib/python2.7/dist-packages/libvirt.py", line 102, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: Cannot recv data: : Connection reset by peer Virsh simple fails with: error: Cannot recv data: : Connection reset by peer error: failed to connect to the hypervisor Since it's certain that the libvirtd daemon has been started on the other systems (they have production VMs that are running), this leaves me puzzled. This connection for virt-manager worked flawlessly for months when all the systems had libvirt 0.8.3. Is this a known incompatibility? Something I have to tweak somewhere? Thanks, Whit

1 2

[libvirt-users] Compatibility with Parallels Virtouzo
by Andreas Mauf 12 Jul '11

12 Jul '11

Hi, will libvirt work with the commercial parallels virtuozzo, too? Cause the linux version of virtuozzo is based on openvz, which ist supported by libvirt. Does someone have some experencies with that? Thanks for any feedback, Andreas -- SysEleven GmbH Rosenthaler Str. 34/35 10178 Berlin Firmensitz: Berlin Registergericht: AG Berlin Charlottenburg, HRB 108571 B Geschäftsführer: Marc Korthaus

2 7

[libvirt-users] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.2 release
by Daniel P. Berrange 12 Jul '11

12 Jul '11

I am happy to announce a new release[1] of the libvirt Perl bindings, Sys::Virt 0.9.2 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.9.2.tar.gz Changes in this release - Changed version numbering to track the corresponding minimum required libvirt releases - Add all new APIs in libvirt 0.9.2 - Requires libvirt >= 0.9.2 The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0