- Users - libvirt List Archives

[libvirt-users] libvirt-java: generate Java code from rng schema
by Celsina Bignoli 05 Jan '12

05 Jan '12

Hi, I am a quite new to libvirt, and need to use it from within Java code. I was wondering if anyone has been able to generate Java classes from the publisher rng schema. I also wonder why rng format was used over more common formats, which would make things easier since there are a number of code generators for it which are well established, at least in the Java world... Any suggestion would be greatly appreciated. Thank you, elsa

2 1

[libvirt-users] Feasibility of iscsi storage pool
by Dennis Jacobfeuerborn 04 Jan '12

04 Jan '12

Hi, I want to start using iscsi storage but ran into a problem. I defined a storage pool and this contains my first LUN which is mounted on a hypervisor. When I now add a second LUN on a target and do a tgt-admin --update --force to reload the target the i/o to the first LUN seems to freeze for a few seconds. Now I'm wondering if I'm doing anything wrong? It's not really tolerable to have all guests using this target freeze simply because I want to add another LUN. The alternative is to use one LUN per target and define lots of targets on the server but then the whole pool configuration no longer makes sense as I would essentially end up with one pool per guest volume. Does anyone have experience with this kind of setup? Regards, Dennis

1 0

[libvirt-users] [LIBVIRT] Xen issue.
by Armand Leclercq 04 Jan '12

04 Jan '12

Hi everybody, I'ld to use virsh over ssh in order to connect to my xen hypervisor from one of my DomU. I tried: virsh -c xen+ssh://root@192.168.0.67:22 list --all And it correctly listed the started virtual computers. And when I tried virsh connect xen+ssh://root@192.168.0.67:22 And I got. error: no connection driver available for xen:/// error: failed to connect to the hypervisor Does that mean I wrongly configured my computers or that libvirt does not support such connection from a DomU. -- Armand Leclercq EPITA 2013 06 71 57 90 73 armand.leclercq(a)gmail.com. /Computer Science is embarrassed by the computer./ _Alan Perlis_

3 2

[libvirt-users] Hotplug/hotadd functionality of libvirt?
by Kees van Reeuwijk 03 Jan '12

03 Jan '12

Hello, First of all, happy new year! I am interested in the hot plugging facilities of libvirt, in particular in what qemu calls 'hot add' of network interface cards. (And also the reverse: hot unplugging/removing of NICs.) I think I am overlooking something, but so far the best I have been able to find is: http://libvirt.org/sources/virshcmdref/html/ and it is not entirely clear to me what the relevant virsh commands are. The most obvious choice seems to be the iface-* commands such as http://libvirt.org/sources/virshcmdref/html/sect-iface-define.html but these seem to be about physical rather than virtual network interfaces, and the documentation `needs to be written' anyway, and from the copyright notice the manual seems to be somewhat outdated by now. Can you give me a little help with this? Is such hot plug/add functionality supported by libvirt in the first place? Is there some kind of overview document about this? What is the most authoritative documentation of this functionality? Is there a Java or C API to access this functionality? Thank you for any help you can give me, -- Kees van Reeuwijk

3 2

[libvirt-users] How to connect to a remote VM ESXi server with Python language?
by ice 30 Dec '11

30 Dec '11

Hi, Dear Mr/Mrs. I have trouble in connecting to a VM ESXi server with python. I am a developer using libvirt to control remote VM ESXi with python language. But I am not able to connect to a remote VM ESXi server. I make my try to solve this issue: 1: I use the function libvirt.Open() to open the remote VM ESXi Server, but I don't know how to input the password. It seems that there is no parameter for password input. 2: I use "virsh connect ---". It is succeed when it is executed on locale machine manual, but failed when I invoke this command in python environment. I use "subprocess.Popen" to execute the command "virsh", but this function would be hung on after command "communicate" executed. -bash-4.1# python Python 2.6.6 (r266:84292, May 20 2011, 16:42:11) [GCC 4.4.5 20110214 (Red Hat 4.4.5-6)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> from subprocess import Popen,PIPE,STDOUT >>> command=['virsh', '-c', 'esx://192.168.58.144/?no_verify=1','list', '--all'] >>> p=Popen(command, stdin=PIPE,stdout=PIPE, stderr=STDOUT) >>> output = p.communicate()[0] How to fix it? Thanks for help! Best regards!

2 2

[libvirt-users] redirect ports from user network
by Алексей Беляев 29 Dec '11

29 Dec '11

Hello. I would like to redirect some ports from user network to host system. In console i can do it: /usr/libexec/qemu-kvm -drive file=/home/libvirt/qemu-fedora.img -vnc 10.200.1.1:1 -net user -redir tcp:22000::49999 -redir tcp:22001::22 How can i do it with libvirt? I make users network in XML config VM: <interface type='user'> <mac address='52:54:00:48:3f:f5'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> But i don't know - how to make redirecting ports and i cann't fint it in documentation. Is it possible? -- Thanks for your feedback. Best regards, Alex

2 1

[libvirt-users] cannot find -lportablexdr
by Juliano Souza 28 Dec '11

28 Dec '11

When I try to compile libvirt: checking for xdrmem_create in -lportablexdr... no checking for library containing xdrmem_create... no configure: error: Cannot find a XDR library Where have that libxdr source? Thanks. -- Juliano Souza

2 1

[libvirt-users] Libvirt java from Windows
by Sergey Sudakovich (ssudakov) 23 Dec '11

23 Dec '11

I am writing a java based client that would be executed from windows that will use libvirt. 1. Got libvirt-java ( http://libvirt.org/sources/java/libvirt-java-0.4.7.tar.gz) and build a jar out it (ant with no params) 2. Then, according to http://libvirt.org/windows.html, built a dll using the "MSYS build script" 3. Got 2 files libvirt-0.dll and libqemu-0.dll When I run the sample example(from Eclipse) from http://libvirt.org/java.html I get the following error: Exception in thread "main" java.lang.UnsatisfiedLinkError: Unable to load library 'virt': %1 is not a valid Win32 application. at com.sun.jna.NativeLibrary.loadLibrary(NativeLibrary.java:169) at com.sun.jna.NativeLibrary.getInstance(NativeLibrary.java:242) at com.sun.jna.Library$Handler.<init>(Library.java:140) at com.sun.jna.Native.loadLibrary(Native.java:368) at com.sun.jna.Native.loadLibrary(Native.java:353) at org.libvirt.jna.Libvirt.<clinit>(Unknown Source) at org.libvirt.Connect.<clinit>(Unknown Source) at Main.main(Main.java:26) Also tried instead of step 2 cross compile in Fedora - same error message when I use new dll's. Does anybody have any idea where do I start fixing the issue?? -- Thank you, Sergey Sudakovich

1 0

[libvirt-users] for a guest accessing host "full disk", how to prevent host vgscan
by David Mansfield 23 Dec '11

23 Dec '11

Hi All. I have a dell system with a H700 raid. Within the hardware RAID config I've created a "virtual disk" which I have assigned to one of my guests. On the host the device is "/dev/sdb", on the guest it's "/dev/vdb". This works fine. Within the guest, we have created lvm PV on /dev/vdb (using the whole disk - no partitions) and created a volume group. The guest's hostname is "argo" and the vg is called "vg_argo_bkup". When I reboot the host, it does a vgscan and finds the volume group and activates it in the _host_, which I need to prevent (I think??). I have successfully done this by filtering "/dev/sdb" in /etc/lvm/lvm.conf (which does NOT work as advertised BTW), but referencing the extremely volatile SCSI "sd*" names seems a terrible way to do this. If I fiddle around in the HW raid config, the /dev/sd? may change. I plan on creating about 10 more VM's spread over a number of machines over the next weeks with a very similar setup, and the admin overhead seems like it'll be onerous and error-prone. I'd love to be able to filter the volume groups by VG name instead of pv device node. The host's hostname is "narnia" and I'd love to say, 'vgscan --include-regex "vg_narnia.*"' or something similar, if you get my drift. Does anyone have a best practice for this? I'm sure iSCSI enthusiasts must have the exact same issue all the time. Oh... I'm using centos 6.2 on host and guest, libvirt-0.9.4-23.el6_2.1.x86_64, although it hardly seems a libvirt issue at all, it seems to be a lvm host issue mainly. Thanks, David Mansfield

3 5

Re: [libvirt-users] [virt-tools-list] error creating NFS storage pool
by Cole Robinson 22 Dec '11

22 Dec '11

On 12/16/2011 05:32 PM, Grant Siebrecht wrote: > Virtual Machine Manager 0.9.0 > OS = Ubuntu 11.10 > I've tried changing permissions on my_nfs_server to 777 with still no luck. > > > > Error creating pool: Could not start storage pool: cannot open volume > '/var/lib/libvirt/images/my_nfs_server/.$EXTEND': Permission denied > > Traceback (most recent call last): > File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper > callback(asyncjob, *args, **kwargs) > File "/usr/share/virt-manager/virtManager/createpool.py", line 480, in > _async_pool_create > poolobj = self._pool.install(create=True, meter=meter, build=build) > File "/usr/lib/pymodules/python2.7/virtinst/Storage.py", line 489, in install > raise RuntimeError(errmsg) > RuntimeError: Could not start storage pool: cannot open volume > '/var/lib/libvirt/images/my_nfs_server/.$EXTEND': Permission denied > moving to libvirt-users What is the .$EXTEND file? Is it a socket or something strange like that? - Cole

2 1

[libvirt-users] Error when creating domain with virsh+qemu
by Stefano Ghio 22 Dec '11

22 Dec '11

Cheers, I'm working on Ubuntu server 11.10 32 bit with libvirt 0.9.2 and qemu-kvm 0.14.1. I have a user oneadmin:oneadmin who also belongs to kvm and libvirtd groups. I have set qemu.conf and libvirtd.conf with user/group oneadmin. I have disk.0 and deployment.0 files owned by oneadmin. My system does not support hardware virtualization so I don't have /dev/kvm. I'm able to start VM with qemu anyways but when issuing the command: virsh -c qemu:///system create deployment.0 I get: error: Failed to create domain from deployment.0 error: internal error process exited while connecting to monitor: 13:00:52.354:1291: info: libvirt version: 0.9.2 13:00:52.371: 1291: debug : virCommandHook:1826 : Waiting on parent for handshake complete on 23 13:00:52.371: 1291: debug : virCommandHook:1842 : Hook is done 0 open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted "error while connecting to monitor" looks to me as something permission-related but I tried a lot of combinations between the qemu and libvirt conf files and nothing worked (yes, I always restarted the system after every change). If I start the same image with sudo /usr/bin/qemu-system-i386 -hda disk.img -boot d -m 384 it works Any help? Thanks -- Dr. Stefano Ghio - ENG Engineering Italy Website: http://groglogs.blogspot.com/ *If you received this message but you are not its recipient, please ignore it and warn me, thank you.*

1 0

[libvirt-users] Issue with IPMI (and KVM) on RHEL 6
by Jawahar Tadipatri 21 Dec '11

21 Dec '11

Hi folks, We experiencing some difficulties in getting IPMI to work on RHEL 6 running as Guest using KVM. We have verified that IPMI works on RHEL 6 if installed on bare metal. Is this a known issue? Can anyone please suggest a fix or work-around for this problem? *RHEL 6 as guest os with kvm on RHEL 6 as host os -- doesn't work* RHEL 6 (client) on bare metal (i.e., the above mentioned host os)-- works Below is the the output of the command (just an indication that it failed) and relevant part of dmesg . # service ipmi start Starting ipmi drivers: [FAILED] # dmesg | tail -12 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) Please revert if any more information is needed. Thanks and Regards, Jawahar

1 0

[libvirt-users] Virt-Manager + IDE Controller
by Paul K. Alabi 19 Dec '11

19 Dec '11

Hi , i m currently running CentOS 5.4 on a Dell C2100 . I have virt-manger , livirt installed but i can't get my VMs to mount more than 4 IDE disk ( i have 8) . I would like to know how to mount ALL 8 Disk on my VM . P ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

1 0

[libvirt-users] Using libvirt networking properly.
by Andrew Spiers 19 Dec '11

19 Dec '11

Hi, I'm interested in a setup in which one guest receives all its networking services (routed IPv4, dhcp, tftp, dns) from another, which is connected via a routing through the hypervisor. I think this is a lot like Guest C and Guest B in the diagram at http://libvirt.org/archnetwork.html. I have experimented with setting the network between Guest B and the hypervisor as a routed network, and the network between Guest B and Guest C as an isolated network. The problems I am having is that I am not sure how to set up a persistent static route to Guest C via Guest B, (I created a file with the route called route-virbr3 in /etc/sysconfig/network-scripts on the hypervisor, but it doesn't seem to do anything), and the changes I need to make to allow traffic with Guest C's source IP to come from Guest B's interface with the hypervisor seems to get overwritten or superceded by additional rules that are created when I start my machine.) I can see something about a qemu-ifup script mentioned at http://www.linux-kvm.org/page/Networking. Should I create something like that and put some sort of `ip route add` command in it? When should that script be called? Is there a way to specify the necessary firewall and routing rules in the xml network configuration? I am working with a Fedora 16 hypervisor and Guest B is a Centos 6 machine. I'd like to use all sorts of different distributions where Guest C is. Regards, Andrew.

1 0

[libvirt-users] network problems with some cloned vm
by xuteng 17 Dec '11

17 Dec '11

Hi,All: Using KVM + libvirt + virt-manager, I meet a strange problem , some cloned vm cannot get correct ip address via bridge network, but some vm can. My host ip is 192.168.1.8 , a bridge interface br0 , an ethernet interface eth0 When the vm(win7) started ,I got the information like " ip 169.254.XXX.XXX netmask 255.255.0.0" by ipconfig Here is the host network settings: [root@kvm-8 ~]# ifconfig br0 Link encap:Ethernet HWaddr BC:AE:C5:21:C8:FB inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::beae:c5ff:fe21:c8fb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59381 errors:0 dropped:0 overruns:0 frame:0 TX packets:52495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:7078092 (6.7 MiB) TX bytes:50729969 (48.3 MiB) eth0 Link encap:Ethernet HWaddr BC:AE:C5:21:C8:FB inet6 addr: fe80::beae:c5ff:fe21:c8fb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:60238 errors:0 dropped:0 overruns:0 frame:0 TX packets:76409 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8037333 (7.6 MiB) TX bytes:52546222 (50.1 MiB) Memory:fbee0000-fbf00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:11312 errors:0 dropped:0 overruns:0 frame:0 TX packets:11312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36054480 (34.3 MiB) TX bytes:36054480 (34.3 MiB) virbr0 Link encap:Ethernet HWaddr D2:38:52:7D:0D:5D inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vnet0 Link encap:Ethernet HWaddr FE:54:00:A1:A1:90 inet6 addr: fe80::fc54:ff:fea1:a190/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:134 errors:0 dropped:0 overruns:0 frame:0 TX packets:247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:24091 (23.5 KiB) TX bytes:15846 (15.4 KiB) [root@kvm-8 ~]# brctl shows: [root@kvm-8 ~]# brctl show bridge name bridge id STP enabled interfaces br0 8000.bcaec521c8fb yes eth0 vnet0 virbr0 8000.000000000000 yes [root@kvm-8 ~]# Any information would be appreciated Thank you! wade xuteng via foxmail

1 0

[libvirt-users] Qemu restore error
by Dennis Householder 15 Dec '11

15 Dec '11

Hello, I'm not sure if I am having a kvm/qemu issue, a virt-manager issue, or a libvirt issue, so if I am asking the wrong crowd please let me know! In short, restoring some suspended kvm guests via virt-manager is failing because libvirt cannot read the qemu header. I cannot find any documentation on what this means. From virsh's limited documentation I was able to gather that there is probably something wrong with an xml file somewhere, but I cannot find it. Any advice is greatly appreciated! Synopsis: I have 5 KVM guests on a Fedora 16 laptop host. I manage them locally through virt-manager. These guests are JUNOS 10.1R1 (installed over FreeBSD 4.1 mini-inst) on a patched bios (SeaBIOS pre-0.6.1-20100805_064324-Compaq8510w). One time I suspended my laptop and the kvm domains were suspended as well. Trying to restore yields the following error: Error restoring domain: operation failed: failed to read qemu header Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in tmpcb callback(*args, **kwargs) File "/usr/share/virt-manager/virtManager/domain.py", line 1050, in startup self._backend.create() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 510, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: operation failed: failed to read qemu header #end error output Package version info: libvirt-python-0.9.6-2.fc16.x86_64 libvirt-0.9.6-2.fc16.x86_64 libvirt-client-0.9.6-2.fc16.x86_64 gpxe-roms-qemu-1.0.1-4.fc16.noarch qemu-system-x86-0.15.1-3.fc16.x86_64 qemu-common-0.15.1-3.fc16.x86_64 qemu-kvm-0.15.1-3.fc16.x86_64 qemu-img-0.15.1-3.fc16.x86_64 virt-manager-0.9.0-7.fc16.noarch virt-manager-common-0.9.0-7.fc16.noarch virt-viewer-0.4.1-3.fc16.x86_64 Again, any advice is appreciated. I hope I have provided enough info. Thank you for your time! -- Dennis CONFIDENTIALITY NOTICE: The information contained in this message may be privileged and/or confidential. If you are not the intended recipient, or responsible for delivering this message to the intended recipient, any review, forwarding, dissemination, distribution or copying of this communication or any attachment(s) is strictly prohibited. If you have received this message in error, please notify the sender immediately, and delete it and all attachments from your computer and network.

2 2

[libvirt-users] Adding a public static IP address to the guest
by Sudheer Satyanarayana 14 Dec '11

14 Dec '11

Hello, The host runs on CentOS 6. I have installed a guest, CentOS 5.7, using libvirt. I am having difficulty understanding how to assign a public static IP address to the guest. From what I understand by reading the Wiki, I think I require routed mode. The ISP has provided a 'portable' IP routed to the VLAN of our servers. I want to assign this IP address to the guest. From the virtual machine hardware details window, I see that "Virtual network 'default' : NAT" is selected for the source device field. Can someone offer a helping hand and instruct and educate me on how to proceed from here? Thanks. -- With warm regards, Sudheer. S

2 1

[libvirt-users] acceptable SASL mechanisms/can libvirt authenticate against PAM
by Dave Allan 14 Dec '11

14 Dec '11

I was playing with SASL authentication a bit today and I wasn't able to get libvirt to authenticate against PAM (or anything else except the sasldb, although I didn't try Kerberos). Does anybody know off the top of their head what mechanisms/password check options work? I'm trying to figure out if I'm attempting the impossible. Dave

4 6

[libvirt-users] Temporary use of disk space when deploying KVM with qcow2 ?
by Jorge Somavilla 14 Dec '11

14 Dec '11

Hello, I'm using libvirt to deploy a series of 7 KVM (in qcow2 format) sequentially. The base image of the qcow2 is an ubuntu server of around 1.6GB. The environment where i am doing this is a Live USB Ubuntu with a persistence file (so that changes made remain). So, the problem: * If the persistence file (i.e. free disk space in the live ubuntu) is up to around 1.6GB, the qemu process of launching the first one of the KVM gets stuck, and a few seconds later an Ubuntu message pops up saying there is no disk space left. * If the persistence file is a bit bigger (100 MB more), it can launch the 7 KVM machines without any disk space problems. This would suggest that during the deployment of one virtual machine, there is a short period of time where a big amount of disk space (similar to the size of the base image) is used (even if i am using qcow2 vms) and afterwards released, so it can be used to launch the second vm, released, used for the third, and so on. If this is correct, i would like to know who is using that space, since my intention would be to, if possible, redirect this temporary disk usage to a RAM filesystem such as tmpfs, so that i don't need such a huge persistence file in the USB. I'm aware that this might be related to qemu-kvm rather than to libvirtitself, but i can't find information about it and i would appreciate if anyone could point me in the right direction. More details or clarification can be provided if needed. Best regards, Jorge

1 0

Re: [libvirt-users] acceptable SASL mechanisms/can libvirt authenticate against PAM
by Josip Deanovic 14 Dec '11

14 Dec '11

On Wednesday 2011-12-14, Josip Deanovic wrote: > On Wednesday 2011-12-14, Dave Allan wrote: > > I was playing with SASL authentication a bit today and I wasn't able > > to get libvirt to authenticate against PAM (or anything else except > > the sasldb, although I didn't try Kerberos). Does anybody know off > > the top of their head what mechanisms/password check options work? > > I'm trying to figure out if I'm attempting the impossible. > > > > Dave > > Hi Dave, > > Here is my working configuration with sql backend. I am using postgres. > > mech_list: digest-md5 > pwcheck_method: auxprop > auxprop_plugin: sql > sql_engine: pgsql > sql_hostnames: localhost > sql_user: qemukvm > sql_passwd: secret > sql_database: qemukvmdb > sql_select: select password from qemuusers where username = '%u' > > > To make use of PAM as far as I know you will have to use saslauthd > method. > > And here is the list of relevant sasl options (I am not sure if it's up > to date): http://asyd.net/docs/cyrus-options.html Sorry, I was mistakenly referring to sasl authentication for vnc client with sasl support. However, this configuration might work with libvit with little or no modifications. However I never tried to authenticate to libvrit using sasl. -- Josip Deanovic

1 0

[libvirt-users] Why does libvirt use XML firewall rules?
by Hansa 14 Dec '11

14 Dec '11

Hi there, When creating a VM with a persistent virtual network, libvirt creates an XML file with firewall definitions and stores it in /etc/libvirt/<hypervisor>/networks/. The XML file is (to my knowledge) incompatible with iptables-restore. Therefore you cant manage your firewall with other iptables (GUI) tools unless libvirt lets you a) import extra rules, b) has an option to export the XML rules into iptables-save format or c) something else. If a) , b) or c) is possible then this discussion is of course useless and I would be pleased to know how its done :) If not, then lets get the discussion started. IMHO, saving rules into XML instead of using iptables-save is absurd since youll have to code stuff which is already coded. Also youll make it incompatible with the tools which are readily available. Why go for this approach and what do we get from it? Best regards, -Hansa

2 2

[libvirt-users] Libvirt filterref magic
by zz elle 13 Dec '11

13 Dec '11

Hi everyone, When i start a libvirt domain (on KVM) with network filtering (using filterref clean-traffic for example), the filter works ! But ... i don't understand how/why it works :( Indeed when i look at ebtables -L iptables-save & arptables-save (and KVM command), I see no filtering rules (which is surprising because clean-traffic requires at least ebtables to be installed). Is it normal ? Do i miss some xxtables administration command to see them ? What appends if i do a arptables-restore, iptables-restore after the vm startup ? Does it remove network filtering rules from xxtables ? No impact ? Thx by advance for your help ZZ, what is the magic behind my questioning ?

2 1

[libvirt-users] libvirt0.9.7.tar.gz installation cannot start libvirtd?
by 张光鹏 13 Dec '11

13 Dec '11

Hi： I have a host Redhat6.1 ，when i install os the libvirt0.8.7 were contained . Latter i installed libvirt0.9.3.tar.gz without uninstall the libvirt0.8.7, i just use the virsh functions. Now i want to install libvirt0.9.7.tar.gz , and i uninstall libvirt0.9.3 and uninstall libvirt0.8.7 with "rpm -e" , i also delete some files contains vesion number 0.8.7 or o.9.3. Today i install libvirt 0.9.7 , untar and install wit "./configure --prefix-/usr/local/libvirt --with-esx", then " make" "make install" ,and i make a link "ln -s /usr/local/libvirt/bin/virsh /usr/bin/virsh" , so i can use virsh . But i cannot start libvirtd ,when i use "service libvirtd start/status.." ,it returns "libvirtd:unrecognized service". I found a libvirtd file in /usr/sbin/. Could someone help to resolve the problem ? Thanks all Best regards --------------------------------------------------------------------------------------------------- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. ---------------------------------------------------------------------------------------------------

2 1

[libvirt-users] Temporary use of disk space when deploying KVM with qcow2?
by Jorge 13 Dec '11

13 Dec '11

Hello, I'm using libvirt to deploy a series of 7 KVM (in qcow2 format) sequentially. The base image of the qcow2 is an ubuntu server. The environment where i am doing this is a Live USB Ubuntu with a persistence file (so that changes made remain). So, my problem: * If the persistence file (i.e. free disk space in the live ubuntu) is up to around 1.5GB, the qemu process of launching the first one of the KVM gets stuck, and a few seconds later an Ubuntu message pops up saying there is no disk space left. * If the persistence file is a bit bigger (100 MB more), it can launch the 7 KVM machines without any disk space problems. This would suggest that during the deployment of one virtual machine, there is a short period of time where a big amount of disk space (similar to the size of the base image) is used (even if i am using qcow2 vms) and afterwards released, so it can be used to launch the second vm, released, used for the third, and so on. If this is correct, i would like to know who is using that space, since my intention would be to, if possible, redirect this temporary disk usage to a RAM filesystem such as tmpfs, so that i don't need such a huge persistence file in the USB. I'm aware that this might be related to qemu-kvm rather than to libvirt itself, but i can't find information about it and i would appreciate if anyone could point me in the right direction. More details or clarification can be provided if needed. Best regards, Jorge

1 0

[libvirt-users] Issues with nwfilter rules
by Kevin 10 Dec '11

10 Dec '11

Hi All, I have two kvm guests running with a bridged configuration bound separately to br0 and br1 on my Fedora 15 host. I'm attempting to create some nwfilter rules on br1 and am running into a bunch of problems that have me scratching my head. libvirt version: 0.8.8-7 What I've noticed on the second host is as follows: - Most all nwfilter rules that I create for the host on br1 don't work as I would expect. If I create a rule for TCP dest port 22 with direction set to 'in', I would expect I could connect to the host via SSH from another host, but I only see a SYN and not a full connection. If I set the direction to 'inout', SSH seems to work. - A nwfilter rule for UDP dest port 53 with direction set to 'out' or 'inout' doesn't allow lookups to an outside DNS server. - In the configuration of one VM, the source Virtual network device lists "Host device vnet0 (Bridge 'br0') and the other lists "Host device eth1 (Bridge 'br1')". I don't see anything different in the two hosts XML configuration files that describe the difference, but I'm concerned that the second VM on br1 is misconfigured. I notice a few iptables rules with "PHYSDEV match --physdev-in vnet1" listed in them, should these really read "PHYSDEV match --physdev-in br1" given the configuration virt-manager is reporting? I would appreciate any pointers. -Kevin

1 0