- Users - libvirt List Archives

[libvirt-users] Non-Root not able to use openReadOnly()
by vipul borikar 24 Apr '12

24 Apr '12

Hi, I have a code : import libvirt con = libvirt.openReadOnly(None) print con.listDomainsID() When i run the above code using root i get the proper output... but when i use non-root user it givers be a empty list [ ] If i change the 2nd line to con = libvirt.open(qemu:///system) It works. I am using RHEL 6.1 with default kvm and libvirt. unix_sock_group = "virt" in libvirtd.conf where virt is a group of non-root user group = "virt" in qemu.conf is set. Any Ideas???? -- Thanks Vipul Borikar "Our task must be to free ourselves...by widening our circle of compassion to embrace all living creatures and the whole of nature and its beauty."

2 1

[libvirt-users] Creating Domain and moving a kvm disk under libvirt control
by James Allsopp 20 Apr '12

20 Apr '12

Hi, I'm trying to start using libvirt on my debian machine, but am having some issues. Regardless of using command-line or gui interface with virt-manager, building the virtual machine stalls on 0 with no indication of why it has stopped working. How do I go about fixing this or diagnosing this problem. Also I've a .img file that work s with KVM, would there be anyway to import it for use with libvirt? Thanks James

2 2

[libvirt-users] Using Sys::Virt with Libvirt
by John Wayne 20 Apr '12

20 Apr '12

Anyone using Sys::Virt CPAN Perl Module with Libvirt? I am unable to install Sys::Virt using cpan, Sys::Virt cannot find Libvirt, even though I have it installed. I tried setting LD_LIBRARY_PATH and also PKG_CONFIG_PATH to point to Libvirt, and in both case Sys::Virt was not able to find Libvirt. During installation Sys::Virt times out with : Sys-Virt-0.9.4/INSTALL CPAN: File::Temp loaded ok (v0.22) CPAN.pm: Going to build D/DA/DANBERR/Sys-Virt-0.9.4.tar.gz libvirt >= 0.9.4 is required Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site] Warning (usually harmless): 'YAML' not installed, will not store persistent state DANBERR/Sys-Virt-0.9.4.tar.gz /usr/bin/perl Makefile.PL INSTALLDIRS=site -- NOT OK Running make test Make had some problems, won't test Running make install Make had some problems, won't install Could not read '/root/.cpan/build/Sys-Virt-0.9.4-DiRtOZ/META.yml'. Falling back to other methods to determine prerequisites Failed during this command: DANBERR/Sys-Virt-0.9.4.tar.gz : writemakefile NO '/usr/bin/perl Makefile.PL INSTALLDIRS=site' returned status 256 I have tried with both Libvirt 0.9.11 and Sys::Virt 0.9.11 in addition to Libvirt 0.9.4 with Sys::Virt 0.9.4. Thanks

1 0

[libvirt-users] Error on running libvirt (dnsmasq)
by John Wayne 20 Apr '12

20 Apr '12

Hi, I am running libvirt on RHEL 6.2 and getting this below error when I start the daemon: /usr/sbin/libvirtd --verbose 2012-04-20 06:00:13.366+0000: 26900: info : libvirt version: 0.9.11 2012-04-20 06:00:13.366+0000: 26900: error : virExecWithHook:424 : Cannot find 'dnsmasq' in path: No such file or directory 2012-04-20 06:00:13.405+0000: 26900: warning : ebiptablesDriverInit:4066 : Could not find 'ebtables' executable 2012-04-20 06:00:13.419+0000: 26900: error : virCommandWait:2306 : internal error Child process (/bin/sh -c IPT=/sbin/ip6tables cmd='$IPT -n -L FORWARD' eval res=\$$"${cmd} 2>&1"$ if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' : '${res}'."; exit 1;fi ) status unexpected: exit status 1 2012-04-20 06:00:13.419+0000: 26900: error : ebiptablesDriverInit:4101 : Testing of ip6tables command failed: Failure to execute command '$IPT -n -L FORWARD' : 'WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. ip6tables v1.4.7: can't initialize ip6tables table `filter': Address family not supported by protocol Perhaps ip6tables or your kernel needs to be upgraded.'. I compiled libvirt from the source, do I really need dnsmasq? Thanks

3 2

[libvirt-users] Building an RPM
by John Wayne 20 Apr '12

20 Apr '12

Hi, I have downloaded libvirt-0.9.11 and compiled it on my RHEL 6.2 system. I am trying to build a binary RPM for distribution, I am not sure what the best way to go about doing this is. http://libvirt.org/FAQ.html suggests that I try 'make rpm', however that ends in the below error: missing XHTML1 DTD cp: cannot stat `./api.html': No such file or directory make[2]: *** [distdir] Error 1 rm news.html.tmp goals.html.tmp archnetwork.html.tmp formatsecret.html.tmp drvopenvz.html.tmp windows.html.tmp testtck.html.tmp drvlxc.html.tmp apps.html.tmp docs.html.tmp formatstorageencryption.html.tmp drvvbox.html.tmp formatdomain.html.tmp php.html.tmp drvhyperv.html.tmp errors.html.tmp hacking.html.tmp format.html.tmp hooks.html.tmp api.html.tmp storage.html.tmp formatcaps.html.tmp relatedlinks.html.tmp compiling.html.tmp index.html.tmp archdomain.html.tmp downloads.html.tmp auth.html.tmp archnode.html.tmp hvsupport.html.tmp bugs.html.tmp java.html.tmp locking.html.tmp logging.html.tmp testapi.html.tmp formatnetwork.html.tmp bindings.html.tmp uri.html.tmp drvtest.html.tmp sitemap.html.tmp drvqemu.html.tmp contact.html.tmp formatnwfilter.html.tmp intro.html.tmp drvxen.html.tmp drvesx.html.tmp drvvmware.html.tmp testsuites.html.tmp devguide.html.tmp firewall.html.tmp architecture.html.tmp migration.html.tmp todo.html.tmp formatsnapshot.html.tmp formatstorage.html.tmp internals.html.tmp deployment.html.tmp api_extension.html.tmp drvuml.html.tmp virshcmdref.html.tmp csharp.html.tmp python.html.tmp drvremote.html.tmp archstorage.html.tmp remote.html.tmp drivers.html.tmp formatnode.html.tmp make[2]: Leaving directory `/home/user/libvirt-0.9.11/docs' make[1]: *** [distdir] Error 1 make[1]: Leaving directory `/home/user/libvirt-0.9.11' make: *** [rpm] Error 2 Any clue on how to proceed? I am not sure why api.html is missing, since this is a clean untar of the 0.9.11 tar file, and './configure;make;make install' all worked without any issues. Thanks!

3 3

[libvirt-users] Thread-safety issues with vbox driver ?
by Jean-Baptiste Rouault 19 Apr '12

19 Apr '12

Hi, I'm experiencing weird things with the vbox driver when using multiple threads. Following is the snippet of code I experience problems with /*****************************************************/ #include <stdlib.h> #include <stdio.h> #include <pthread.h> #include <libvirt/libvirt.h> void *create_and_destroy(void *arg) { virDomainPtr dom = (virDomainPtr)arg; char buf[VIR_UUID_STRING_BUFLEN]; virDomainGetUUIDString(dom, buf); if (virDomainCreate(dom) != 0) { printf("failed to start %s\n", buf); goto end; } printf("%s started\n", buf); if (virDomainDestroy(dom) != 0) { printf("failed to destroy %s\n", buf); } printf("%s destroyed\n", buf); end: virDomainFree(dom); pthread_exit(NULL); } int main(int argc, char **argv) { virConnectPtr conn = virConnectOpen("vbox:///session"); int i; int count = virConnectNumOfDefinedDomains(conn); char **names = malloc(count * sizeof(char *)); virConnectListDefinedDomains(conn, names, count); virDomainPtr *doms = malloc(count * sizeof(virDomainPtr)); for (i = 0 ; i < count ; ++i) { doms[i] = virDomainLookupByName(conn, names[i]); } pthread_t *threads = malloc(count * sizeof(pthread_t)); pthread_attr_t attr; pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); for (i = 0 ; i < count ; ++i) { pthread_create(&threads[i], &attr, create_and_destroy, (void *)doms[i]); } pthread_attr_destroy(&attr); for (i = 0 ; i < count ; ++i) { pthread_join(threads[i], NULL); } virConnectClose(conn); pthread_exit(NULL); } /************************************************/ Here is the output of the program with 2 defined domains: > libvir: VBOX error : operation failed: OpenRemoteSession/LaunchVMProcess failed, domain can't be started > failed to start c538c89a-70da-42ab-a88a-5aeb15698c12 > 034cf837-abe7-4c48-8373-0ddcf480d416 started > 034cf837-abe7-4c48-8373-0ddcf480d416 destroyed Sometimes the first domain really fails to start, but sometimes it starts correctly but libvirt reports an error. Sometimes domains aren't destroyed but libvirt reports no error at all. If there is only one domain, no problem occurs at all. I also tried the same code (ie with multiple domains) but with only one thread and it works well. I managed to reproduce these issues with libvirt 0.9.4, 0.9.7, using VirtualBox 4.0 and 4.1. -- Jean-Baptiste ROUAULT Ingénieur R&D - diateam : Architectes de l'information Phone : +33 (0)9 53 16 02 70 Fax : +33 (0)2 98 050 051

3 6

[libvirt-users] USB Passthrough of two identical devices
by Hendrik Friedel 19 Apr '12

19 Apr '12

Hello, I re-post my question from some days ago, as I got no reply.. Please let me know, if my question is unclear, or if I can do anything to make answering it easier. I appreciate your help. Greetings, Hendrik Hello, I'd like to pass throug two identical devices to my VM. (using libvirt, guest is debian). For one device, it works like this: <hostdev mode='subsystem' type='usb'> <source> <vendor id='0x4fa'/> <product id='0x2490'/> </source> <boot order='2'/> </hostdev> But now, I have another device just like this one: Bus 001 Device 007: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter Bus 001 Device 005: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter Unfortunately, only one of these two devices appears for the Guest, even if I duplicate the above entry. Now, there's this option to pass devices: <address bus='0x06' device='0x02''/> But the Bus/Device can/might change... Maybe this can be overcome by udev (and maybe this is the default in ubuntu? can someone confirm?) I have tried the latter syntax aswell. Here the log-file: Code: LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc -cpu qemu32 -enable-kvm -m 256 -smp 1 -name WG -uuid fd90f0d6-122c-992f-a399-4105ee30d6e3 -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/WG.monitor,server,nowait -monitor chardev:monitor -boot c -drive file=/var/lib/zentyal/machines/WG/WG-Test.qcow2,if=scsi,index=0,boot=on,format=qcow2 -net nic,macaddr=00:16:3e:5d:c7:9e,vlan=0,name=nic.0 -net tap,fd=29,vlan=0,name=tap.0 -serial none -parallel none -usb -usbdevice mouse -vnc 0.0.0.0:0,password -k de -vga cirrus -usbdevice host:04fa:2490 -usbdevice host:04fa:2490 usb_create: no bus specified, using "usb.0" for "usb-host" husb: open device 1.5 husb: config #1 need -1 husb: 1 interfaces claimed for configuration 1 husb: grabbed usb device 1.5 usb_create: no bus specified, using "usb.0" for "usb-host" What's odd in this: -usbdevice host:04fa:2490 -usbdevice host:04fa:2490 And this, although I had used the bus/device syntax... So, what would you recommend? Regards, Hendrik

1 0

[libvirt-users] CfP 7th Workshop on Virtualization in High-Performance Cloud Computing (VHPC'12)
by VHPC 12 19 Apr '12

19 Apr '12

we apologize if you receive multiple copies of this CFP. =================================================================== CALL FOR PAPERS 7th Workshop on Virtualization in High-Performance Cloud Computing VHPC '12 as part of Euro-Par 2012, Rhodes Island, Greece =================================================================== Date: August 28, 2012 Workshop URL: http://vhpc.org SUBMISSION DEADLINE: Rolling abstract submission June 4, 2012 - Full paper submission SCOPE: Virtualization has become a common abstraction layer in modern data centers, enabling resource owners to manage complex infrastructure independently of their applications. Conjointly, virtualization is becoming a driving technology for a manifold of industry grade IT services. The cloud concept includes the notion of a separation between resource owners and users, adding services such as hosted application frameworks and queueing. Utilizing the same infrastructure, clouds carry significant potential for use in high-performance scientific computing. The ability of clouds to provide for requests and releases of vast computing resources dynamically and close to the marginal cost of providing the services is unprecedented in the history of scientific and commercial computing. Distributed computing concepts that leverage federated resource access are popular within the grid community, but have not seen previously desired deployed levels so far. Also, many of the scientific data centers have not adopted virtualization or cloud concepts yet. This workshop aims to bring together industrial providers with the scientific community in order to foster discussion, collaboration and mutual exchange of knowledge and experience. The workshop will be one day in length, composed of 20 min paper presentations, each followed by 10 min discussion sections. Presentations may be accompanied by interactive demonstrations. TOPICS Topics of interest include, but are not limited to: Higher-level cloud architectures, focusing on issues such as: - Languages for describing highly-distributed compute jobs - Workload characterization for VM-based environments - Optimized communication libraries/protocols in the cloud - Cross-layer optimization of numeric algorithms on VM infrastructure - System and process/bytecode VM convergence - Cloud frameworks and API sets - Checkpointing/migration of large compute jobs - Instrumentation interfaces and languages - VMM performance (auto-)tuning on various load types - Cloud reliability, fault-tolerance, and security - Software as a Service (SaaS) architectures - Research and education use cases - Virtualization in cloud, cluster and grid environments - Cross-layer VM optimizations - Cloud use cases including optimizations - VM-based cloud performance modelling - Performance and cost modelling Lower-level design challenges for Hypervisors, VM-aware I/O devices, hardware accelerators or filesystems in VM environments, especially: - Cloud, grid and distributed filesystems - Hardware for I/O virtualization (storage/network/accelerators) - Storage and network I/O subsystems in virtualized environments - Novel software approaches to I/O virtualization - Paravirtualized I/O subsystems for modified/unmodified guests - Virtualization-aware cluster interconnects - Direct device assignment - NUMA-aware subsystems in virtualized environments - Hardware Accelerators in virtualization (GPUs/FPGAs) - Hardware extensions for virtualization - VMMs/Hypervisors for embedded systems Data Center management methods, including: - QoS and and service levels - VM cloud and cluster distribution algorithms - VM load-balancing in Clouds - Hypervisor extensions and tools for cluster and grid computing - Fault tolerant VM environments - Virtual machine monitor platforms - Management, deployment and monitoring of VM-based environments - Cluster provisioning in the Cloud PAPER SUBMISSION Papers submitted to the workshop will be reviewed by at least two members of the program committee and external reviewers. Submissions should include abstract, key words, the e-mail address of the corresponding author, and must not exceed 10 pages, including tables and figures at a main font size no smaller than 11 point. Submission of a paper should be regarded as a commitment that, should the paper be accepted, at least one of the authors will register and attend the conference to present the work. Accepted papers will be published in the Springer LNCS series - the format must be according to the Springer LNCS Style. Initial submissions are in PDF; authors of accepted papers will be requested to provide source files. Format Guidelines: http://www.springer.de/comp/lncs/authors.html Style template: ftp://ftp.springer.de/pub/tex/latex/llncs/latex2e/llncs2e.zip Abstract Submission Link: http://edas.info/newPaper.php?c=11943 IMPORTANT DATES Rolling abstract submission June 4, 2012 - Full paper submission June 29, 2012 - Acceptance notification July 20, 2012 - Camera-ready version due August 28, 2012 - Workshop Date CHAIR Michael Alexander (chair), TU Wien, Austria Gianluigi Zanetti (co-chair), CRS4, Italy Anastassios Nanos (co-chair), NTUA, Greece PROGRAM COMMITTEE Paolo Anedda, CRS4, Italy Giovanni Busonera, CRS4, Italy Brad Calder, Microsoft, USA Roberto Canonico, University of Napoli Federico II, Italy Tommaso Cucinotta, Alcatel-Lucent Bell Labs, Ireland Werner Fischer, Thomas-Krenn AG, Germany William Gardner, University of Guelph, USA Marcus Hardt, Forschungszentrum Karlsruhe, Germany Sverre Jarp, CERN, Switzerland Shantenu Jha, Louisiana State University, USA Xuxian Jiang, NC State, USA Nectarios Koziris, National Technical University of Athens, Greece Simone Leo, CRS4, Italy Ignacio Llorente, Universidad Complutense de Madrid, Spain Naoya Maruyama, Tokyo Institute of Technology, Japan Jean-Marc Menaud, Ecole des Mines de Nantes, France Dimitrios Nikolopoulos, Foundation for Research&Technology Hellas, Greece Jose Renato Santos, HP Labs, USA Walter Schwaiger, TU Wien, Austria Yoshio Turner, HP Labs, USA Kurt Tutschku, University of Vienna, Austria Lizhe Wang, Indiana University, USA Chao-Tung Yang, Tunghai University, Taiwan DURATION: Workshop Duration is one day. GENERAL INFORMATION The workshop will be held as part of Euro-Par 2012. Euro-Par 2012: http://europar2012.cti.gr/

1 0

[libvirt-users] Problems using latest qemu-kvm and latest libvirt ( hvm missing )
by Bhasker C V 18 Apr '12

18 Apr '12

Hi all I have faced this issue already and the solution was to go back to a old version of qemu-kvm and/or libvirt and things start falling into place but this time I would want to solve this. I have used these versions as per the o/p of the commands below. To jumpstart a new machine which is libvirt capable, it always is a hastle to find out which of the version combination of libvirt,qemu-kvm will work. Just by picking the latest of the two versions does not help and ends up not supporting hvm at all $ sudo virsh capabilities <capabilities> <host> <uuid>34373030-3635-435a-4a32-313230485156</uuid> <cpu> <arch>x86_64</arch> <model>Westmere</model> <vendor>Intel</vendor> <topology sockets='2' cores='4' threads='2'/> <feature name='rdtscp'/> <feature name='pdpe1gb'/> <feature name='dca'/> <feature name='pdcm'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='smx'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='monitor'/> <feature name='dtes64'/> <feature name='pclmuldq'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='vme'/> </cpu> <power_management/> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> </host> </capabilities> $ virsh --version 0.9.11 $ qemu-system-x86_64 --version QEMU emulator version 1.0,1 (qemu-kvm-1.0.1), Copyright (c) 2003-2008 Fabrice Bellard $ sudo virsh uri qemu:///system $ sudo virsh version Compiled against library: libvir 0.9.11 Using library: libvir 0.9.11 Using API: QEMU 0.9.11 error: failed to get the hypervisor version error: internal error Cannot find suitable emulator for x86_64 $ which kvm /usr/local/bin/kvm Can someone tell me, please, what is the version of qemu-kvm which will work well with the latest libvirt 0.9.11 ? since clearly the latest versions of qemu-kvm and libvirt are not compatible fully (atleast not hvm). Even better if this is documented somewhere visible so that a lot of time can be saved in iterating through the versions of qemu-kvm to find out which one will work. -- Bhasker C V Secure Mails: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4D05FEEC54E47413

1 1

[libvirt-users] [API reference] Are there XML-handling API to retrieve info directly from xml configure file
by Zhihua Che 18 Apr '12

18 Apr '12

Hi, everyone I'm writing a application using libvirt and need to query guest os's virtual network interface usage, like bytes read or written through a given interface. I know int virDomainInterfaceStats(virDomainPtr dom, const char * path, virDomainInterfaceStatsPtr stats, size_t size) is designed for my purpose but I 'm not sure how I determine the second parameter path. I'm now think of determining the virtual interface by parsing the domain's xml configure file. But I don't find that libvirt supply such functions, that means, I have to resort to other library lik libxml? thanks

4 15

[libvirt-users] Guests can't connect to each other
by Anthony Bourguignon 18 Apr '12

18 Apr '12

Hi, I'm using libvirt and qemu on Debian Wheezy. I'm having a strange behavior. Guests can't connect to each other when they're on the same host. On the host I'm using bonding (in active / backup mode) and vlan. It looks like this : eth0 \ / macvtap0 bond0 --- vlan222 eth1 / \ macvtap1 So I've got two guests, let's say A and B. When I try to ping B from A, it works : # ping -s 3000 -c 5 78.109.95.11 PING 78.109.95.11 (78.109.95.11) 3000(3028) bytes of data. 3008 bytes from 78.109.95.11: icmp_req=1 ttl=64 time=0.065 ms 3008 bytes from 78.109.95.11: icmp_req=2 ttl=64 time=2.19 ms 3008 bytes from 78.109.95.11: icmp_req=3 ttl=64 time=1.43 ms --- 78.109.95.11 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4001ms rtt min/avg/max/mdev = 0.065/0.960/2.197/0.760 ms But nothing happens when I try to ssh it (not even a timeout). You'll find enclosed the tcpdump captures on the source and the destination. It's the same when I use netcat in udp. At the same time, connection from the host to one guest is working perfectly. There is no iptables rule on the host, and nothing too on the guests. Here are the virsh dumpxml of the different components : # virsh dumpxml vm1 <domain type='kvm' id='11'> <name>vm1</name> <uuid>4eaaed00-c610-b468-ad55-600a0b4e244c</uuid> <memory>2048000</memory> <currentMemory>2048000</currentMemory> <memoryBacking> <hugepages/> </memoryBacking> <vcpu cpuset='0,2,4,8,10,12,14'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0,8'/> <vcpupin vcpu='1' cpuset='2,10'/> <vcpupin vcpu='2' cpuset='4,12'/> <vcpupin vcpu='3' cpuset='6,14'/> <vcpupin vcpu='4' cpuset='0,8'/> <vcpupin vcpu='5' cpuset='2,10'/> <vcpupin vcpu='6' cpuset='4,12'/> <vcpupin vcpu='7' cpuset='6,14'/> </cputune> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> <boot dev='network'/> </os> <features> <acpi/> <apic/> </features> <cpu match='exact'> <model>Westmere</model> <vendor>Intel</vendor> <topology sockets='1' cores='8' threads='1'/> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='none' io='native'/> <source dev='/dev/vps/vm1'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <interface type='network'> <mac address='52:54:00:0e:58:ae'/> <source network='vlan222'/> <target dev='macvtap0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='0.0.0.0' keymap='fr'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='vga' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> # virsh dumpxml vm2 <domain type='kvm' id='13'> <name>vm2</name> <uuid>4f760831-22b1-ff3b-26e7-6b3fec49e918</uuid> <memory>2048000</memory> <currentMemory>2048000</currentMemory> <memoryBacking> <hugepages/> </memoryBacking> <vcpu cpuset='1,3,5,7,9,11,13,15'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='1' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='2' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='3' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='4' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='5' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='6' cpuset='1,3,5,7,9,11,13,15'/> <vcpupin vcpu='7' cpuset='1,3,5,7,9,11,13,15'/> </cputune> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> <boot dev='network'/> </os> <features> <acpi/> <apic/> </features> <cpu match='exact'> <model>Westmere</model> <vendor>Intel</vendor> <topology sockets='1' cores='4' threads='2'/> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='none' io='native'/> <source dev='/dev/vps/vm2'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <interface type='network'> <mac address='52:54:00:cb:ce:41'/> <source network='vlan222'/> <target dev='macvtap1'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5901' autoport='yes' listen='0.0.0.0' keymap='fr'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='vga' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> # virsh net-dumpxml vlan222 <network> <name>vlan222</name> <uuid>2b763b5c-4ec1-9b5f-b29d-b7a7ea0f743d</uuid> <forward dev='vlan222' mode='bridge'> <interface dev='vlan222'/> </forward> </network> Thanks in advance to help me understand this issue.

3 7

[libvirt-users] help:any docs for open vswitch supporting?
by yue wang 18 Apr '12

18 Apr '12

hi everybody, i saw the new feature: network: support Open vSwitch. how to use this feature? are there any documents about that? i didn't find it on the website. Thanks, Heuye

5 6

[libvirt-users] USB Passthrough with two identical devices
by Hendrik Friedel 17 Apr '12

17 Apr '12

Hello, I'd like to pass throug two identical devices to my VM. (using libvirt, guest is debian). For one device, it works like this: <hostdev mode='subsystem' type='usb'> <source> <vendor id='0x4fa'/> <product id='0x2490'/> </source> <boot order='2'/> </hostdev> But now, I have another device just like this one: Bus 001 Device 007: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter Bus 001 Device 005: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter Unfortunately, only one of these two devices appears for the Guest, even if I duplicate the above entry. Now, there's this option to pass devices: <address bus='0x06' device='0x02''/> But the Bus/Device can/might change... Maybe this can be overcome by udev (and maybe this is the default in ubuntu? can someone confirm?) I have tried the latter syntax aswell. Here the log-file: Code: LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc -cpu qemu32 -enable-kvm -m 256 -smp 1 -name WG -uuid fd90f0d6-122c-992f-a399-4105ee30d6e3 -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/WG.monitor,server,nowait -monitor chardev:monitor -boot c -drive file=/var/lib/zentyal/machines/WG/WG-Test.qcow2,if=scsi,index=0,boot=on,format=qcow2 -net nic,macaddr=00:16:3e:5d:c7:9e,vlan=0,name=nic.0 -net tap,fd=29,vlan=0,name=tap.0 -serial none -parallel none -usb -usbdevice mouse -vnc 0.0.0.0:0,password -k de -vga cirrus -usbdevice host:04fa:2490 -usbdevice host:04fa:2490 usb_create: no bus specified, using "usb.0" for "usb-host" husb: open device 1.5 husb: config #1 need -1 husb: 1 interfaces claimed for configuration 1 husb: grabbed usb device 1.5 usb_create: no bus specified, using "usb.0" for "usb-host" What's odd in this: -usbdevice host:04fa:2490 -usbdevice host:04fa:2490 And this, although I had used the bus/device syntax... So, what would you recommend? Regards, Hendrik

1 0

[libvirt-users] What does cpu_time returned by virDomainGetCPUStats mean?
by Zhihua Che 17 Apr '12

17 Apr '12

hi, everyone. I find an 'interesting' thing involving virDomainGetCPUStats(). I call it for cpu usage consumed by a domain and get a array of virTypedParameter. My system is 2-core and hyperviser return 1 parameter per cpu. So the contents of the array is like this. virTypedParameter[0] { .fiedl = "cpu_time" .type = 4 .value.ul = 51640610899 } virTypedParameter[1] { .field = "cpu_time" .type = 4 .value.ul = 55302820304 } I thought this value store the run time of the cpu since last boot. But I find I was wrong because this value would increase until it wraps down and doesn't reset even the domain is restarted. So, what does this value mean? How can I get the CPU usage of the domain? I found nothing on the API reference doc page:-(. No word is related with the meaning of the returned array of virTypedParameter by virDomainGetCPUStats().

3 7

[libvirt-users] Ansis Atteka has invited you to use Google Talk
by Ansis Atteka 16 Apr '12

16 Apr '12

------------------------------------------------------------------------ Ansis Atteka has invited you to sign up for Google Talk so you can talk to each other for free over your computers. To sign-up, go to: http://www.google.com/accounts/NewAccount?service=talk&sendvemail=true&skip… Google Talk is a downloadable Windows* application that offers: - Free calls over your computer anytime, from anywhere, and for as long as you want - A simple and intuitive user interface for sending instant messages or making calls--no clutter, pop-ups or ads - Superior voice quality through just a microphone and computer speaker - Fast file transfers with no restrictions on file type After signing-up, download Google Talk and sign in with your new Google Account username and password. You can then begin inviting anyone you want to talk to for free. Google Talk works with any computer speaker and microphone, such as the ones built-in to many PC laptops today, as well as with wired and wireless headsets and USB phones. Google Talk also works across all firewalls. Google Talk is still in beta. Just like with Gmail, we're working hard to add features and make improvements, so we might also ask for your comments and suggestions periodically. We appreciate your help in making it even better! Thanks, The Google Talk Team To learn more about Google Talk before signing up, visit: http://www.google.com/talk/about.html (If clicking the URLs in this message does not work, copy and paste them into the address bar of your browser). * Not a Windows user? No problem. You can also connect to the Google Talk service from any platform using third-party clients (http://www.google.com/talk/otherclients.html)

1 0

[libvirt-users] [API reference] confused by CPU time term
by Zhihua Che 16 Apr '12

16 Apr '12

Hi, everyone I'm writing a virtual machine monitor based on libvirt. As I read the api reference, I found I'm confused by some terms. 1, What is cumulative I/O wait CPU time? API reference says that VIR_NODE_CPU_STATS_IOWAIT indicate cumulative I/O wait CPU time. I'm confused by this time. As far as I know, when cpu meets IO wait situation, it will schedule another task, so, how this IO wait time is accounted? 2, How do I get VCPU runtime? In my mind, VIR_DOMAIN_CPU_STATS_CPUTIME indicates the physical cpu time consumed by the domain. Is there any API by which I can query virtual CPU running stats in one domain?

3 3

[libvirt-users] What's the precision of the domain cpu stats?
by Zhihua Che 16 Apr '12

16 Apr '12

Hi, everyone I'm using libvirt and resort to virDomainGetCPUStats for cpu usage by one domain. In my system, Ubuntu-11.10 64bit with 2 cores and Qemu Hyperviser, this function returns something like this: virTypedParameter[0] { field: "cpu_time" type: 4 value.ul 51640610899 } virTypedParameter[1] { field: "cpu_time" type: 4 value.ul 55302820304 } This 51640610899 and 55302820304 kind of conflict the result returned by "cat /proc/stat | grep cpu" cpu 449224 6812 89433 4407261 50327 1 2443 0 13041 0 cpu0 224251 2603 43144 2195672 34682 0 2350 0 6692 0 cpu1 224972 4209 46289 2211589 15644 0 93 0 6349 0 I know the precision of /proc/stat is 1/HZ, so what's the precision of CPU stats returned by virDomainGetCPUStats?

2 1

Re: [libvirt-users] libvirt slow responding after define poool with existing VG with some other lv
by Anton Gorlov 16 Apr '12

16 Apr '12

16.04.2012 18:05, Cole Robinson написал: >> 16.04.2012 17:48, Cole Robinson ÐœÐ°Ð¿ÐžÑÐ°Ð»: >>> Sorry, I'd like to help, but judging by your log file this will be a pain to >>> figure out and I can't spare the time. Hopefully we can narrow it down >>> remotely. >> familiar problem... >> in strace i see >> futex(0x7d1f84, FUTEX_WAIT_PRIVATE, 3, NULL) = -1 EAGAIN (Resource temporarily >> unavailable) >> futex(0x7d1f84, FUTEX_WAIT_PRIVATE, 5, NULL<detached ...> > Hmm, maybe try a kernel downgrade? downgrade kernel to 2.6.32 solve problem.

1 0

[libvirt-users] libvirt slow responding after define poool with existing VG with some other lv
by Anton Gorlov 16 Apr '12

16 Apr '12

If I add VG with some other lv-s to libvirt pool then libvirt slow responding. How to fix it? <pool type='logical'> <name>LVM_MAIN</name> <uuid>a2713bed-ad4a-fb79-83b5-65a9e8f1094e</uuid> <capacity>0</capacity> <allocation>0</allocation> <available>0</available> <source> <name>LVM_MAIN</name> <format type='unknown'/> </source> <target> <path>/dev/LVM_MAIN</path> <permissions> <mode>0700</mode> <owner>-1</owner> <group>-1</group> </permissions> </target> </pool> vgdisplay File descriptor 7 (pipe:[37858]) leaked on vgdisplay invocation. Parent PID 12554: bash --- Volume group --- VG Name LVM_MAIN System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 1.82 TiB PE Size 4.00 MiB Total PE 476931 Alloc PE / Size 139520 / 545.00 GiB Free PE / Size 337411 / 1.29 TiB VG UUID ymYQtb-Xjnd-OBNv-xnUQ-w9gi-5uxm-kjzo not created libvirt /dev/LVM_MAIN/os_mirror VG Name LVM_MAIN LV UUID iPfekp-PN1C-rPHP-Bo3K-TljL-cffi-NdDvpi LV Write Access read/write LV Status available # open 1 LV Size 500.00 GiB Current LE 128000 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 created by libvirt-install --- Logical volume --- LV Name /dev/LVM_MAIN/debian6.0-1.img VG Name LVM_MAIN LV UUID 23ncRV-yimL-2OTZ-K4ck-YKNo-s6x6-Bjh3cl LV Write Access read/write LV Status available # open 0 LV Size 15.00 GiB Current LE 3840 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/LVM_MAIN/debian6.0-bacula.img VG Name LVM_MAIN LV UUID BFANbb-fFpC-k0wZ-ue5e-Y6bF-Rnbg-tmelt0 LV Write Access read/write LV Status available # open 0 LV Size 15.00 GiB Current LE 3840 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/LVM_MAIN/debian6.0-bacula-1.img VG Name LVM_MAIN LV UUID nTOAaH-3B50-QtQ7-Xf9k-9Q0H-mftQ-p0zdO6 LV Write Access read/write LV Status available # open 0 LV Size 15.00 GiB Current LE 3840 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

2 5

[libvirt-users] A way to determine when a guest domain was launched?
by Amy Skinner 16 Apr '12

16 Apr '12

I've looked around at the API documents (I'm using python) and I know how to find the cpu active uptime of the domain, but that only increases if the domain is running something. Is there a way to determine when the domain was first launched, either as a date or uptime with idle uptime included? /Amy

2 1

[libvirt-users] Live migration of instance using KVM hypervisor fails
by Gurjar, Unmesh 12 Apr '12

12 Apr '12

Hi, I am trying to migrate a running instance, but it fails with the following error: $ virsh migrate --live instance-00000008 qemu+tcp://10.2.3.150/system --verbose error: operation failed: migration job: unexpectedly failed I can see following in the instance specific qemu log directory (/var/log/libvirt/qemu/instance-00000008.log) on the destination host: 2012-04-12 03:57:26.211: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name instance-00000008 -uuid 86b357d0-b76d-4cde-a0d1-90fb65508ff2 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/instance-00000008.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -rtc base=utc -boot c -kernel /opt/stack/nova/mnt_instances/instance-00000008/kernel -initrd /opt/stack/nova/mnt_instances/instance-00000008/ramdisk -append root=/dev/vda console=ttyS0 -drive file=/opt/stack/nova/mnt_instances/instance-00000008/disk,if=none,id=drive-virtio-disk0,format=qcow2,cache=none -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -netdev tap,ifname=tap57b16714-9a,script=,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=fa:16:3e:45:b3:c6,bus=pci.0,addr=0x3 -chardev file,id=charserial0,path=/opt/stack/nova/mnt_instances/instance-00000008/console.log -device isa-serial,chardev=charserial0,id=serial0 -chardev pty,id=charserial1 -device isa-serial,chardev=charserial1,id=serial1 -usb -device usb-tablet,id=input0 -vnc 127.0.0.1:0 -k en-us -vga cirrus -incoming tcp:0.0.0.0:49169 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 Domain id=20 is tainted: high-privileges Domain id=20 is tainted: shell-scripts char device redirected to /dev/pts/17 2012-04-12 03:57:26.850: shutting down can't delete tap57b16714-9a from eth1: Operation not supported SIOCSIFADDR: Permission denied SIOCSIFFLAGS: Permission denied SIOCSIFFLAGS: Permission denied /etc/qemu-ifdown: could not launch network script Libvirt version on both hosts: $ libvirtd --version libvirtd (libvirt) 0.9.2 $ virsh --version 0.9.2 Here are my libvirtd.conf details: listen_tls = 0 listen_tcp = 1 unix_sock_group = "libvirtd" unix_sock_rw_perms = "0770" auth_unix_ro = "none" auth_unix_rw = "none" auth_tcp = "none" Would be great if someone can point out the issue here. Note: I have disable apparmor for libvirtd profile and am able to list the instances running on the remote host (from both the servers). Thanks & Regards, Unmesh Gurjar | Lead Engineer | Vertex Software Private Ltd. | w. +91.20.6604.1500 x 379 | m. +91.982.324.7631 | unmesh.gurjar(a)nttdata.com<mailto:unmesh.gurjar@nttdata.com> | Follow us on Twitter@NTTDATAAmericas ______________________________________________________________________ Disclaimer:This email and any attachments are sent in strictest confidence for the sole use of the addressee and may contain legally privileged, confidential, and proprietary data. If you are not the intended recipient, please advise the sender by replying promptly to this email and then delete and destroy this email and any attachments without any further use, copying or forwarding

1 0

[libvirt-users] No way to obtain guest's cpu and mem usage?
by RaSca 12 Apr '12

12 Apr '12

Hi everybody, I'm using the PHP API to make a web interface interact with the virtual machines installed on some hypervisor. Everything is fine, but I would like to find a way to get the guest's cpu and mem usage, so that it should be possible to make some rrd graphs. I didn't find out anything and also it seems looking around that there is no way to obtain those data. What is strange for me is that programs like virt-top are showing exactly what I'm looking for. Can anyone help me to find out a way to retrieve those statistics? Another related question: do you think I can obtain the same data by using this: ps aux | egrep "[/]usr/libexec/qemu-kvm.*libvirt.*" | awk '{print $3"/"$4}' on the hypervisor? These are related to the kvm process, and the kvm process IS the virtual machine... Or not? Thanks to everybody, -- RaSca Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene! rasca(a)miamammausalinux.org http://www.miamammausalinux.org

3 8

[libvirt-users] Can I get all esx servers by virsh connecting vcenter?
by li_fuqiong 12 Apr '12

12 Apr '12

To Whom may be concerned: I connect a vCenter by vpx://example-vcenter.com/dc1/srv1 , but how I get all esx servers managed by this vCenter? Thank you. Mark

1 0

[libvirt-users] Libvirtd not starting on reboot
by Shawn Davis 12 Apr '12

12 Apr '12

Hello everyone, I have libvirt and qemu/kvm running on ubuntu 11.10 desktop. Everything is working great when it is on. The problem is if I reboot, virsh doesn't see the hypervisor anymore and I can't manually start libvirtd. Libvirtd is currently located in /usr/sbin/libvirtd and I originally started it with sudo ./libvirtd -d from that directory. How do I ensure that libvirtd starts on bootup of the host machine? Thanks, Shawn

1 0

[libvirt-users] vol-wipe and delete
by Shawn Davis 11 Apr '12

11 Apr '12

Hello all, I know libvirt has the following two commands: vol-wipe vol-delete Can someone please explain to me how these function? Do these only remove previous session data so that a new virtual instance cannot see it or does it remove it at the physical level level too so that the data cannot be found anywhere on the physical drive? I know Eucalyptus and KVM use sparse files upon instance creation and the instance thinks the ephemeral space is all zeroes even though it is just sparse. I appreciate any insight in how the two virsh commands work and if they use zeroes, sparse, or some other method. Thanks, Shawn

2 1