- Users - libvirt List Archives

[libvirt-users] JVM crashes during GC
by Sachin Soman 24 Apr '19

24 Apr '19

Hi, Could you tell me if the following is some known issue? While performing the following simple test, I see my JVM crashing (consistently): 1. Open a connection to an ESXi driver/host (passing ConnectAuthDefault instance). 2. Close the connection. 3. Invoke GC When GC is triggered, at some point, some unallocated native memory is being tried to release. That's failing. The error thrown is: java(78745,0x70000241e000) malloc: *** error for object 0x7fd5df561390: pointer being freed was not allocated *** set a breakpoint in malloc_error_break to debug Frames from core dump: frame #0: 0x00007fff5b274b66 libsystem_kernel.dylib`__pthread_kill + 10 frame #1: 0x00007fff5b43f080 libsystem_pthread.dylib`pthread_kill + 333 frame #2: 0x00007fff5b1d01ae libsystem_c.dylib`abort + 127 frame #3: 0x00007fff5b2ce8a6 libsystem_malloc.dylib`free + 521 frame #4: 0x00000001127f43a7 frame #5: 0x00000001127e3ffd frame #6: 0x00000001127e3ffd frame #7: 0x00000001127e3ffd frame #8: 0x00000001127e3ffd frame #9: 0x00000001127e4042 frame #10: 0x00000001127e3ffd frame #11: 0x00000001127e3ffd frame #12: 0x00000001127dc4e7 frame #13: 0x000000010c0e235e libjvm.dylib`JavaCalls::call_helper(JavaValue*, methodHandle*, JavaCallArguments*, Thread*) + 1710 frame #14: 0x000000010c0e2b02 libjvm.dylib`JavaCalls::call_virtual(JavaValue*, KlassHandle, Symbol*, Symbol*, JavaCallArguments*, Thread*) + 356 frame #15: 0x000000010c0e2cae libjvm.dylib`JavaCalls::call_virtual(JavaValue*, Handle, KlassHandle, Symbol*, Symbol*, Thread*) + 74 frame #16: 0x000000010c1208ee libjvm.dylib`thread_entry(JavaThread*, Thread*) + 124 frame #17: 0x000000010c33e84d libjvm.dylib`JavaThread::thread_main_inner() + 155 frame #18: 0x000000010c33ff12 libjvm.dylib`JavaThread::run() + 448 frame #19: 0x000000010c26058a libjvm.dylib`java_start(Thread*) + 246 frame #20: 0x00007fff5b43c661 libsystem_pthread.dylib`_pthread_body + 340 frame #21: 0x00007fff5b43c50d libsystem_pthread.dylib`_pthread_start + 377 frame #22: 0x00007fff5b43bbf9 libsystem_pthread.dylib`thread_start + 13 I have installed Libvirt 5.2.0. Java bindings libvirt-java 0.5.1 JNA 4.0.0 Tested Java environments: Oracle Java 8 and OpenJDK 8 on MAC, OpenJDK 11 on Ubuntu 16 Thanks & Regards Sachin Soman

3 11

[libvirt-users] how to use Libvirt create bridge for vm on Mac OS
by llilulu 24 Apr '19

24 Apr '19

Hi Recently, I install Libvirt and Qemu in my Mac book, I find I can't create a bridge like linux bridge use for my vm, I want to know how to create a bridge on Mac for vm. Thanks.

2 1

Re: [libvirt-users] [libvirt] Why virsh domxml-to-native qemu-argv changes PCI slot number
by Andrea Bolognani 19 Apr '19

19 Apr '19

Moving to libvirt-users where it belongs. On Thu, 2019-04-18 at 06:47 +0000, Tal Attaly wrote: > Hi, > I have bridge type interface defined with slot 3 - > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> > but after running virsh domxml-to-native qemu-argv I get slot 2- > -netdev tap,fd=21,id=hostnet0 -device e1000,netdev=hostnet0,id=net0,mac=f2:ff:ff:ff:ff:07,bus=pci.0,addr=0x2 > Any idea why it's happen and how to keep the slot number? Libvirt version is 4.5.0 I can reproduce this, and also confirm that it shouldn't happen :) qemuDomainAssignAddresses() is supposed to make sure that any address configured explicitly by the user (or previously by libvirt) is preserved, and it's doing that correctly when it's called from inside qemuDomainDefAssignAddresses(); however, for some reason, by the time we call it again in qemuProcessPrepareDomain() the PCI address for the network interface is no longer set, and so a fresh one gets assigned instead. I'll investigate further and get back to you. > here is the full domain XML - > > <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> > <name>vm1</name> > <uuid>dbad303e-fc1b-454e-8861-712bf1766a64</uuid> > <memory unit='KiB'>4194304</memory> > <currentMemory unit='KiB'>4194304</currentMemory> > <vcpu placement='static'>1</vcpu> > <os> > <type arch='x86_64' machine='pc-i440fx-2.12'>hvm</type> > <boot dev='hd'/> > </os> > <features> > <acpi/> > <apic/> > </features> > <cpu mode='custom' match='exact' check='partial'> > <model fallback='allow'>SandyBridge-IBRS</model> > </cpu> > <clock offset='utc'> > <timer name='rtc' tickpolicy='catchup'/> > <timer name='pit' tickpolicy='delay'/> > <timer name='hpet' present='no'/> > </clock> > <on_poweroff>destroy</on_poweroff> > <on_reboot>restart</on_reboot> > <on_crash>destroy</on_crash> > <pm> > <suspend-to-mem enabled='no'/> > <suspend-to-disk enabled='no'/> > </pm> > <devices> > <emulator>/qemu/x86_64-softmmu/qemu-system-x86_64</emulator> > <disk type='file' device='disk'> > <driver name='qemu' type='qcow2'/> > <source file='/var/lib/libvirt/images/vm.img'/> > <target dev='hda' bus='ide'/> > <address type='drive' controller='0' bus='0' target='0' unit='0'/> > </disk> > <controller type='usb' index='0' model='ich9-ehci1'> > <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x7'/> > </controller> > <controller type='usb' index='0' model='ich9-uhci1'> > <master startport='0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/> > </controller> > <controller type='usb' index='0' model='ich9-uhci2'> > <master startport='2'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x1'/> > </controller> > <controller type='usb' index='0' model='ich9-uhci3'> > <master startport='4'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x2'/> > </controller> > <controller type='ide' index='0'> > <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> > </controller> > <controller type='pci' index='0' model='pci-root'/> > <interface type='bridge'> > <mac address='f2:ff:ff:ff:ff:07'/> > <source bridge='br0:'/> > <model type='e1000'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> > </interface> > <serial type='tcp'> > <source mode='bind' host='10.210.27.119' service='9999'/> > <protocol type='telnet'/> > <target type='isa-serial' port='0'> > <model name='isa-serial'/> > </target> > </serial> > <console type='tcp'> > <source mode='bind' host='10.210.27.119' service='9999'/> > <protocol type='telnet'/> > <target type='serial' port='0'/> > </console> > <input type='mouse' bus='ps2'/> > <input type='keyboard' bus='ps2'/> > <memballoon model='virtio'> > <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> > </memballoon> > </devices> > <qemu:commandline> > <qemu:env name='CONFIG_FILE' value='/opt/cfg/qemu.cfg'/> > </qemu:commandline> > </domain> -- Andrea Bolognani / Red Hat / Virtualization

2 3

[libvirt-users] Failed to probe capabilities on libvirt v5.1.0
by Vladik Romanovsky 13 Apr '19

13 Apr '19

Hi everyone, Unfortunately, I'm facing an issue with libvirt 5.1.0 when probing capabilities. Failed to probe capabilities for /usr/bin/qemu-system-x86_64: internal error: Failed to start QEMU binary /usr/bin/qemu-system-x86_64 for probing: qemu-system-x86_64: cannot create PID file: Cannot open pid file: Permission denied I see that the qmp directory is being created, however, it belongs to root instead of qemu: /var/lib/libvirt/qemu/qmp-U1w6o6: 0 drwx------. 2 root root 6 Apr 11 14:46 qmp-U1w6o6 The user and group are set to "qemu" in /etc/libvirt/qemu.conf I would appreciate any pointers. Thank you! Vladik

2 1

[libvirt-users] Network hooks for ethernet interfaces
by Ruben Kerkhof 12 Apr '19

12 Apr '19

Hi all, I have a hook script, /etc/libvirt/hooks/network, that doesn't seem to be called when I attach an interface with type 'ethernet' with this xml snippet: <interface type='ethernet'> <model type="virtio"/> <source> <ip address="10.100.0.1" prefix="24" peer="10.100.0.10"/> </source> </interface> https://www.libvirt.org/hooks.html#intro says "A network is started or stopped or an interface is plugged/unplugged to/from the network (since 1.2.2)". While I don't have a network defined in xml, I'd expect this to work just as well for 'ethernet' type interfaces. Am I wrong? Kind regards, Ruben Kerkhof

4 7

[libvirt-users] CGroup V2 Support
by ITeng A 11 Apr '19

11 Apr '19

Dear all Does the current version of libvirt support the new cgroup v2 ? I am running KVM qemu VMs on Ubuntu with linux Kernel 4.18 with cgroup v1 and I would like to use Cgroup v2 but we I mount cgroup v2 the libvirt virtualization daemon fail to start with error message that it cant create cgroup /system.slice/libvirtd.service no such file or directory. kind regards, Asraa Ali

2 1

[libvirt-users] Guest interface names not same as configured name
by PR PR 07 Apr '19

07 Apr '19

Hi, I am creating a guest with following description for interfaces in the xml using virsh create xml command. For some reason, the guest interface names in the VM dont match the names specified in the xml. Is there a way to make guest interface names predictable? Following is the qemu version on host dpkg --list | grep -i qemu ii qemu-kvm 1:2.11+dfsg-1ubuntu7.10 amd64 QEMU Full virtualization on x86 hardware <interface type='user'> <mac address='52:54:00:17:0b:e7'/> <guest dev='eth0'/> <model type='e1000'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='ethernet'> <mac address='52:54:00:ee:70:34'/> <target dev='net0'/> <guest dev='Ethernet0'/> <model type='rtl8139'/> <alias name='net1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </interface> Thanks

2 2

[libvirt-users] Cannot create PID file
by Nicolás Iglesias 07 Apr '19

07 Apr '19

Hi Fellow users I've just compiled latest libvirt and qemu, both from their respective official repositories. Libvirtd starts perfect, but when I try to start a domain using the virsh console, I get the following: virsh # start --domain win8.1 error: Failed to start domain win8.1 error: internal error: Failed to start QEMU binary /usr/bin/qemu-system-x86_64 for probing: qemu-system-x86_64: cannot create PID file: Cannot open pid file: Permission denied I'm not sure where to look at. Any hint would be much appreciated. Regards, Nicolas Iglesias

2 2

[libvirt-users] Schema
by Maximilian Schieder 06 Apr '19

06 Apr '19

Hey, Is there a Schema of creating a VM (Domain)? Something like: Create Storagepool Init Storagepool Maxi

2 1

[libvirt-users] is it possible to create a snapshot from a guest residing in a plain partition ?
by Lentes, Bernd 05 Apr '19

05 Apr '19

Hi, i can store the disk of a guest in a plain partition which isn't formatted. That's no problem, i did it already several times, although the promised speed increase didn't appear. But is it possible to create from such a guest a snapshot in a .sn file using virsh ? Regards, Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 phone: +49 89 3187 3827 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg wer Fehler macht kann etwas lernen wer nichts macht kann auch nichts lernen Helmholtz Zentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH) Ingolstaedter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDirig'in Petra Steiner-Hoffmann Stellv.Aufsichtsratsvorsitzender: MinDirig. Dr. Manfred Wolter Geschaeftsfuehrung: Prof. Dr. med. Dr. h.c. Matthias Tschoep, Heinrich Bassler, Kerstin Guenther Registergericht: Amtsgericht Muenchen HRB 6466 USt-IdNr: DE 129521671

2 3