- Users - libvirt List Archives

[libvirt-users] migrate with libirt 0.7.0
by Daniel Bidwell 17 Mar '10

17 Mar '10

Using ubuntu 9.10 and libvir 0.7.0, when I do a migrate a domain from machine A to B, the migration "completes" but remains in a frozen state until I do a "suspend/resume" on it on B. Then it runs fully normally. What do I do to skip the suspend/resume steps? -- Daniel R. Bidwell | bidwell(a)andrews.edu Andrews University | Information Technology Services If two always agree, one of them is unnecessary "Friends don't let friends do DOS" "In theory, theory and practice are the same. In practice, however, they are not."

1 0

[libvirt-users] internal error cannot parse QEMU version number
by jeremy avnet 17 Mar '10

17 Mar '10

I've seen this error a couple of times over the past month, but it's starting to happen more regularly now (perhaps since VM usage is increasing). The last few times I've seen it when trying to start a VM (virsh start domain): $ virsh start goat Connecting to uri: qemu:///system error: Failed to start domain goat error: internal error cannot parse QEMU version number in ' PC emulator version 0.11.0 (qemu-kvm-0.11.0), Copyright (c) 2003-2008 Fabrice Bellard' Running libvirt version 0.7.0-1ubuntu13.1 under Ubuntu 9.10 amd64. $ kvm --version QEMU PC emulator version 0.11.0 (qemu-kvm-0.11.0), Copyright (c) 2003-2008 Fabrice Bellard I saw this message, but it's for an older version: http://osdir.com/ml/libvir-list/2009-05/msg00192.html Any ideas on how to prevent this error? Thank you. .:. jeremy

1 0

[libvirt-users] behaviour of "virsh shutdown domainName"
by Jorge Somavilla 16 Mar '10

16 Mar '10

Hi all, I am experiencing some problems with different versions of libvirt (0.7.5 and 0.7.7), with a kvm (WinXP), host running Ubuntu 9.10, and i would like to ask you two questions: - In virsh, after running the command "shutdown domainName", what should be the final state of the domain, if the shutdown finishes correctly: "shutoff", "no-state", "inactive", or the domain shouldn't show in "list --all" (full clean-up)? - After the command "shutdown domainName", should i be able to run the command "start domainName", without first defining the domain? (i.e.: does shutdown "undefine" the domain?). In my experience 0.7.5 used to leave the shut down domains as defined, so i could run "start" right after. Testing in other hosts this doesn't work always like that, and even if the domain apparently shuts down correctly, the domain sometimes shows in "list --all", and sometimes it doesn't. With libvirt 0.7.7 the domain never shows in "list --all" after a successful shutdown, which makes me think it was a bug and it has been corrected. Am i missing anything? Any help would be much appreciated, thanks in advance. Jorge Somavilla.

2 2

[libvirt-users] Duplicate USB vendor,product specification
by Don Morrison 16 Mar '10

16 Mar '10

I studying how to attach USB devices to a KVM guest virtual machine using libvirt. Using the "vendor" and "product" to specify the source device seems like a good option since the "bus" and "device" values can change as a device is removed and re-inserted. The question I have is what should I expect to happen if I plug in two identical USB devices - so they have the same vendor/product information? There is nothing in the documentation on libvirt.org to address this case. Thanks. Don Morrison

2 1

[libvirt-users] Memory domain
by angelo alfano 14 Mar '10

14 Mar '10

1. Can I set the memory of a domain when it is running? 2. If the host has a total memory of 2GB and launch two VM which respectively 2GB of memory setting, because I don't have a mistake o warning? Grazie Angelo

1 0

[libvirt-users] Regarding SPICE
by anuj rampal 14 Mar '10

14 Mar '10

Hi, I have set up KVM on FC12. I was wondering if its possible to Display the VM using spice + libvirt? As in, if I can define my domain with graphics like: <graphics type='spice' port='-1' autoport='yes' listen='0.0.0.0'/> or <graphics type='spice' port='5903' ' listen='0.0.0.0'/> Thanks & Regards Anuj

3 3

[libvirt-users] drivers
by mattias 14 Mar '10

14 Mar '10

I no i can use libvirt with qemu and xen But openvz? I run debian lenny with libvirt but no no oepnvz

1 0

[libvirt-users] Problem with libvirt migration
by Daniel Bidwell 14 Mar '10

14 Mar '10

I have two hosts, vm1 and vm2, which are both running libvirt 0.7.0. They share a common ocfs2 file system that resides on a san, and have identical network configurations. I am running qemu-kvm 0.11.0 on ubuntu 9.10 servers. I start base32 on vm1 and it comes up (it also runs fine if started on vm2). Then from vm2 I do: vm2#: virsh -c qemu://vm1/system migrate --live base32 qemu://vm2/system The migration starts and the vm2 virsh returns to the prompt. vm2 shows base32 as running and vm1 shows base32 as stopped. The console for base32 on vm2 is frozen and unresponsive. I have the debug level set to 1 on both machines. This is an excerpt from the virsh.log file from vm1: 8:19:40.772: debug : qemudDomainMigratePerform:6513 : base32: migrate reply: migrate "tcp:vm2.cc.andrews.edu:49152" 08:19:40.772: debug : qemudShutdownVMDaemon:2076 : Shutting down VM 'base32' 08:19:40.773: debug : virEventRemoveHandleImpl:173 : Remove handle 11 08:19:40.773: debug : virEventRemoveHandleImpl:186 : mark delete 9 19 08:19:40.773: debug : virEventInterruptLocked:640 : Interrupting 08:19:40.773: debug : virRun:796 : /usr/bin/virt-aa-helper -R -u libvirt-2469118c-9b90-44e3-a6ce-01a08bfe28f5 08:19:40.773: debug : virEventRunOnce:567 : Poll got 1 event 08:19:40.773: debug : virEventDispatchHandles:450 : Dispatch n=0 f=5 w=1 e=1 (nil) 08:19:40.773: debug : virEventDispatchHandles:440 : Skip deleted n=9 w=11 f=19 08:19:40.773: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:40.773: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:40.773: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:40.773: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:40.773: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:40.774: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:40.774: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:40.774: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:40.774: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:40.774: debug : virEventMakePollFDs:365 : Prepare n=9 w=12, f=16 e=1 08:19:40.774: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:40.774: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:40.774: debug : virEventRunOnce:565 : Poll on 10 handles 0x2628850 timeout -1 08:19:40.960: debug : virEventUpdateTimeoutImpl:247 : Updating timer 1 timeout with 0 ms freq 08:19:40.960: debug : virEventInterruptLocked:640 : Interrupting 08:19:40.960: debug : virDomainFree:1922 : domain=0x2605c60 08:19:40.960: debug : virUnrefDomain:373 : unref domain 0x2605c60 base32 1 08:19:40.960: debug : virReleaseDomain:327 : release domain 0x2605c60 base32 08:19:40.960: debug : virReleaseDomain:343 : unref connection 0x2679bd0 2 08:19:40.960: debug : virEventUpdateHandleImpl:146 : Update handle w=12 e=3 The logs on vm2 (destination host) are: 08:19:29.566: debug : virDomainMigratePrepare2:3233 : dconn=0x2096d50, cookie=0x7ff72bf59dc0, cookielen=0x7ff72bf59dcc, uri_in=(null), uri_out=0x20839f0,flags=1, dname=(null), bandwidth=0, dom_xml=<domain type='kvm' id='1'> <name>base32</name> <uuid>2469118c-9b90-44e3-a6ce-01a08bfe28f5</uuid> <memory>262144</memory> <currentMemory>262144</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc-0.11'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/home/vms/base32/base32.vmdk'/> <target dev='hda' bus='ide'/> </disk> <interface type='bridge'> <mac address='00:0c:29:db:97:14'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='e1000'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> <seclabel type='dynamic' model='apparmor'> <label>libvirt-2469118c-9b90-44e3-a6ce-01a08bfe28f5</label> <imagelabel>libvirt-2469118c-9b90-44e3-a6ce-01a08bfe28f5</imagelabel> </seclabel> </domain> 08:19:29.569: debug : virGetDomain:296 : New hash entry 0x20941a0 08:19:29.569: debug : virDomainGetUUIDString:2441 : domain=0x20941a0, buf=0x7ff72bf584f8 08:19:29.569: debug : virDomainGetUUID:2407 : domain=0x20941a0, uuid=0x7ff72bf58450 08:19:29.569: debug : virExecWithHook:607 : /usr/bin/virt-aa-helper -c -u libvirt-2469118c-9b90-44e3-a6ce-01a08bfe28f5 08:19:29.857: debug : virExecWithHook:607 : /usr/bin/kvm -help 08:19:29.865: debug : virEventRunOnce:567 : Poll got 1 event 08:19:29.871: debug : virEventDispatchHandles:450 : Dispatch n=4 f=3 w=5 e=1 0x2058040 08:19:29.871: info : qemudDispatchSignalEvent:370 : Received unexpected signal 17 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:29.871: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=1 08:19:29.871: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:29.871: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:29.871: debug : virEventRunOnce:565 : Poll on 10 handles 0x2091480 timeout -1 08:19:29.872: debug : virEventRunOnce:567 : Poll got 2 event 08:19:29.872: debug : virEventDispatchHandles:450 : Dispatch n=2 f=8 w=3 e=1 0x2074e90 08:19:29.872: debug : device_added:513 : net_4a_cf_74_02_5d_6c 08:19:29.872: debug : virExecWithHook:607 : /usr/bin/kvm -S -M pc-0.11 -cpu qemu32 -m 256 -smp 1 -name base32 -uuid 2469118c-9b90-44e3-a6ce-01a08bfe28f5 -monitor unix:/var/run/libvirt/qemu/base32.monitor,server,nowait -boot c -drive file=/home/vms/base32/base32.vmdk,if=ide,index=0,boot=on -net nic,macaddr=00:0c:29:db:97:14,vlan=0,model=e1000,name=e1000.0 -net tap,fd=19,vlan=0,name=tap.0 -serial none -parallel none -usb -vnc 127.0.0.1:0 -vga cirrus -incoming tcp:0.0.0.0:49152 08:19:29.885: debug : virEventDispatchHandles:450 : Dispatch n=4 f=3 w=5 e=1 0x2058040 08:19:29.885: info : qemudDispatchSignalEvent:370 : Received unexpected signal 17 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=1 08:19:29.885: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:29.885: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:29.885: debug : virEventRunOnce:565 : Poll on 10 handles 0x2091480 timeout -1 08:19:29.885: debug : virEventRunOnce:567 : Poll got 1 event 08:19:29.885: debug : virEventDispatchHandles:450 : Dispatch n=4 f=3 w=5 e=1 0x2058040 08:19:29.885: info : qemudDispatchSignalEvent:370 : Received unexpected signal 17 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:29.885: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=1 08:19:29.885: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:29.885: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:29.885: debug : virEventRunOnce:565 : Poll on 10 handles 0x2091480 timeout -1 08:19:30.075: debug : virEventAddHandleImpl:112 : Add handle 19 0 0x425d40 0x2073710 08:19:30.075: debug : virEventAddHandleImpl:116 : Used 10 handle slots, adding 10 more 08:19:30.075: debug : virEventInterruptLocked:640 : Interrupting 08:19:30.075: debug : virEventRunOnce:567 : Poll got 1 event 08:19:30.075: debug : virEventDispatchHandles:450 : Dispatch n=0 f=5 w=1 e=1 (nil) 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=1 8:19:30.075: debug : virEventMakePollFDs:365 : Prepare n=10 w=12, f=19 e=0 08:19:30.075: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:30.075: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:30.075: debug : virEventRunOnce:565 : Poll on 11 handles 0x2091480 timeout -1 08:19:30.076: debug : qemudDomainSetMemoryBalloon:3175 : base32: balloon reply: balloon 256 08:19:30.077: debug : virEventUpdateTimeoutImpl:247 : Updating timer 1 timeout with 0 ms freq 08:19:30.077: debug : virEventInterruptLocked:640 : Interrupting 08:19:30.077: debug : virEventRunOnce:567 : Poll got 1 event 08:19:30.077: debug : virEventUpdateHandleImpl:146 : Update handle w=11 e=3 08:19:30.077: debug : virEventUpdateTimeoutImpl:247 : Updating timer 1 timeout with -1 ms freq 08:19:30.077: debug : virEventInterruptLocked:640 : Interrupting 08:19:30.077: debug : virEventInterruptLocked:636 : Skip interrupt, 1 846931856 08:19:30.077: debug : virEventDispatchHandles:450 : Dispatch n=0 f=5 w=1 e=1 (nil) 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=5 08:19:30.077: debug : virEventMakePollFDs:365 : Prepare n=10 w=12, f=19 e=0 08:19:30.077: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:30.077: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:30.077: debug : virEventRunOnce:565 : Poll on 11 handles 0x2091480 timeout -1 08:19:30.077: debug : virEventRunOnce:567 : Poll got 2 event 08:19:30.077: debug : virEventDispatchHandles:450 : Dispatch n=0 f=5 w=1 e=1 (nil) 08:19:30.077: debug : virEventDispatchHandles:450 : Dispatch n=9 f=16 w=11 e=4 0x2058040 08:19:30.078: debug : virEventUpdateHandleImpl:146 : Update handle w=11 e=1 08:19:30.078: debug : virEventInterruptLocked:636 : Skip interrupt, 1 846931856 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=1 08:19:30.078: debug : virEventMakePollFDs:365 : Prepare n=10 w=12, f=19 e=0 08:19:30.078: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:30.078: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:30.078: debug : virEventRunOnce:565 : Poll on 11 handles 0x2091480 timeout -1 08:19:40.936: debug : virEventRunOnce:567 : Poll got 1 event 08:19:40.936: debug : virEventDispatchHandles:450 : Dispatch n=9 f=16 w=11 e=1 0x2058040 08:19:40.937: debug : virEventUpdateHandleImpl:146 : Update handle w=11 e=1 08:19:40.937: debug : virEventInterruptLocked:636 : Skip interrupt, 1 846931856 08:19:40.937: debug : virEventUpdateHandleImpl:146 : Update handle w=11 e=1 08:19:40.937: debug : virEventInterruptLocked:636 : Skip interrupt, 1 846931856 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=0 w=1, f=5 e=1 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=1 w=2, f=8 e=0 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=2 w=3, f=8 e=1 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=3 w=4, f=9 e=1 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=4 w=5, f=3 e=1 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=5 w=6, f=11 e=25 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=6 w=7, f=12 e=25 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=7 w=8, f=14 e=25 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=8 w=9, f=15 e=1 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=9 w=11, f=16 e=1 08:19:40.937: debug : virEventMakePollFDs:365 : Prepare n=10 w=12, f=19 e=0 08:19:40.937: debug : virEventCalculateTimeout:313 : Calculate expiry of 3 timers 08:19:40.937: debug : virEventCalculateTimeout:343 : Timeout at 0 due in -1 ms 08:19:40.937: debug : virEventRunOnce:565 : Poll on 11 handles 0x2091480 timeout -1 08:19:40.937: debug : virDomainMigrateFinish2:3281 : dconn=0x2096d50, dname=base32, cookie=(nil), cookielen=0, uri=tcp:vm2.cc.andrews.edu:49152, flags=1, retcode=0 08:19:40.938: debug : virGetDomain:298 : Existing hash entry 0x20941a0: refs now 2 08:19:40.938: debug : virEventUpdateTimeoutImpl:247 : Updating timer 1 timeout with 0 ms freq 08:19:40.938: debug : virEventInterruptLocked:640 : Interrupting 08:19:40.938: debug : virEventUpdateHandleImpl:146 : Update handle w=11 e=3 08:19:40.938: debug : virEventInterruptLocked:640 : Interrupting The migration appears to have completed successfully, but the console doesn't respond to anything and neither does the ethernet. Any ideas on how to get past this last step? -- Daniel R. Bidwell | bidwell(a)andrews.edu Andrews University | Information Technology Services If two always agree, one of them is unnecessary "Friends don't let friends do DOS" "In theory, theory and practice are the same. In practice, however, they are not."

2 1

[libvirt-users] ESX support
by Jonathan Kelley 13 Mar '10

13 Mar '10

Just curious but how long has ESX support been in libvirt? Also I noticed this error when accessing one of my windows vms: error: internal error Expecting VMX entry 'scsi0.virtualDev' to be 'buslogic' or 'lsilogic' but found 'lsisas1068' Not sure whether this is an enhancement, defect, or not supported at this time. Thanks. -Jon

2 1

[libvirt-users] unable to get domain list of KVM guests from libvirt as non-root user
by Tom Georgoulias 12 Mar '10

12 Mar '10

I have a python script that monitors the guest VMs on a servers running Xen, but the script doesn't work properly on a server I just built with KVM. The script runs as a non-root user (same on all servers) and simply gathers some details on the status and names of the domains running on the host. The Xen and KVM servers are running CentOS 5.4 x86_64 and are using the same version of libvirt: libvirt-0.6.3-20.1.el5_4 libvirt-python-0.6.3-20.1.el5_4 Both Xen and KVM servers have the default libvirt.conf config file and the following /var/run/libvirt permissions: KVM: [root@kvm ~]# ls -l /var/run/libvirt total 16 srwx------ 1 root root 0 Mar 12 08:37 libvirt-sock srwxrwxrwx 1 root root 0 Mar 12 08:37 libvirt-sock-ro drwxr-xr-x 2 root root 4096 Mar 8 13:05 network drwxr-xr-x 2 root root 4096 Mar 11 16:17 qemu Xen: [root@xen ~]# ls -l /var/run/libvirt total 16 srwx------ 1 root root 0 Feb 5 08:53 libvirt-sock srwxrwxrwx 1 root root 0 Feb 5 08:53 libvirt-sock-ro drwxr-xr-x 2 root root 4096 Jan 21 14:38 network drwxr-xr-x 2 root root 4096 Oct 20 18:50 qemu Kernel/hypervisor versions of Xen and KVM servers: kernel-xen-2.6.18-164.9.1.el5 xen-3.0.3-94.el5_4.2 kvm-83-105.el5_4.27 kvm-qemu-img-83-105.el5_4.27 kernel-2.6.18-164.11.1.el5 To troubleshoot, I've been running python interactively as the non-root user. Here's how my Xen servers behave: [testu@xen ~]$ python Python 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import libvirt >>> conn = libvirt.openReadOnly(None) >>> domains = conn.listDomainsID() >>> print domains [0, 3, 15, 16, 21, 24, 26, 30, 32, 36, 38, 41, 43, 45, 47, 49, 51, 55, 63, 67] >>> When I try the same thing on the KVM server: [testu@kvm ~]$ python Python 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import libvirt >>> conn = libvirt.openReadOnly(None) 14:33:07.303: error : No vport operation path found for host0 14:33:07.320: error : No vport operation path found for host4 14:33:07.325: error : No vport operation path found for host3 14:33:07.367: error : No vport operation path found for host1 14:33:07.368: error : No vport operation path found for host2 >>> domains = conn.listDomainsID() >>> print domains [] >>> However, when logged in as root on the KVM server, it works just like my Xen servers: [root@kvm ~]# python Python 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import libvirt >>> conn = libvirt.openReadOnly(None) >>> domains = conn.listDomainsID() >>> print domains [1] As an experiment suggested by a someone on the centos-virt list, I modified the ownership and permissions of the socket files in /etc/libvirt/libvirtd.conf to use the same user running the python script. That didn't make a difference. [testu@kvm ~]$ ls -l /var/run/libvirt total 16 srwxrwx--- 1 root testu 0 Mar 12 07:45 libvirt-sock srwxrwxrwx 1 root testu 0 Mar 12 07:45 libvirt-sock-ro drwxr-xr-x 2 root root 4096 Mar 8 13:05 network drwxr-xr-x 2 root root 4096 Mar 11 16:17 qemu [testu@kvm ~]$ python Python 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import libvirt >>> conn = libvirt.openReadOnly(None) 07:45:56.893: error : No vport operation path found for host0 07:45:56.912: error : No vport operation path found for host4 07:45:56.919: error : No vport operation path found for host3 07:45:56.967: error : No vport operation path found for host1 07:45:56.968: error : No vport operation path found for host2 >>> domains = conn.listDomainsID() >>> print domains [] >>> Can someone give me some pointers on what to check next? I'm running out of ideas. Thanks, Tom

2 2