- Users - libvirt List Archives

[libvirt-users] Migration between 2 hosts
by Parakkal, Navin S 19 Jun '13

19 Jun '13

Hi , How does migration of VMs between 2 hosts work ? Say we want to migrate a VM from host A - > B , does it create a process on B, copy all the data of the process on A to B and then once done kill process on A. Is it how it happens ? Can someone tell me how the copying of data between process on A and new process on B is done ? Regards, Navin

1 0

[libvirt-users] Live Migration Without Shared Storage
by cmcc.dylan 19 Jun '13

19 Jun '13

I‘m very exited to hear that qemu has supported live migration without shared storage and I also have found some persons give their experiments, for example: （http://blog.allanglesit.com/2011/08/linux-kvm-management-live-migration-without-shared-storage/） # virsh migrate --live vmname qemu+ssh://kvmnode02.allanglesit.net/system --copy-storage-all --verbose --persistent --undefinesource I repeated the above experiment, but I failed. I want to know I need which version of qemu and libvirt and how the progress of the new feature.

2 1

[libvirt-users] Not able to open Xen Connection using libvirt
by varun bhatnagar 18 Jun '13

18 Jun '13

Hi, I am trying to create virtual machine through libvirt using xen hypervisor. I was able to install xen successfully but when I tried connecting to the hypervisor it gave an error. And while installing libvirt (libvirt-1.0.1) I installed it with xen support. I am pasting the snapshot of the error below: [image: Inline image 1] Can anyone tell me why I am getting this error? // Varun

1 0

[libvirt-users] Using a Windows partition as libvirt media
by Roland Giesler 18 Jun '13

18 Jun '13

I'm running Ubuntu desktop 12.10 with libvirt and virt-manager (gui). I have been led to believe that it is possible to use and existing partition as the disk storage volume for a virtual machine. The windows partition is /dev/sda2, but if I use fs: Pre-formatted Block Device I can select the partion. What I can't figure out is how to tell the vitual machine to use this volume. I tried with virt-manager, but the only options I have are * Local media * Network install * Network Boot * Import Existing Disk Image How can I do this? regards Roland Giesler

2 5

[libvirt-users] Unable to setup qemu-guest-agent
by Nehal J. Wani 17 Jun '13

17 Jun '13

Could anyone please list out the steps required to run the command $virsh qemu-agent-command Steps that I followed: 1. Clone the latest source code of libvirt 2. Create a vm of f18 (source:liveCD) 3. Edit f18 domain xml and add this: <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/f16x86_64.agent'/> <target type='virtio' name='org.qemu.guest_agent.0'/> </channel> 4. On host: #./tools/virsh start f18 5. On guest: #yum install qemu-guest-agent -y 6. On host: # ./tools/virsh qemu-agent-command f18 '{"execute":"guest-network-get-interfaces"}' Expected Response: {"return":[{"name":"lo","ip- addresses":[{"ip-address-type":"ipv4","ip-address":"127.0.0.1","prefix":8},{"ip-address-type":"ipv6","ip-address":"::1","prefix":128}],"hardware-address":"00:00:00:00:00:00"},{"name":"eth0","ip-addresses":[{"ip-address-type":"ipv4","ip-address":"192.168.122.62","prefix":24},{"ip-address-type":"ipv6","ip-address":"fe80::5054:ff:fe14:9998","prefix":64}],"hardware-address":"52:54:00:14:99:98"}]} Actual result: (null) Where am I going wrong? -- Nehal J. Wani UG2, BTech CS+MS(CL) IIIT-Hyderabad http://commanlinewani.blogspot.com

1 0

[libvirt-users] Enabling route_localnet on private network
by McEvoy, James 15 Jun '13

15 Jun '13

I have an issue setting a persistent kernel option on a libvirt net device since that device does not exist early enough during the boot of the KVM host. I am using the 127.0.0.0 local net for cluster communication between the KVM host and its guests as well as between KVM guests. In order to use addresses on the 127.0.0.0/8 network, which is reserved for local communication, two configuration changes must be made after the system is rebooted. First the default route of 127.0.0.1/0 to the loopback device must be deleted which I did by adding an "ip route delete" command to the ifcfg-br0 file that starts the bridged network that is used by the KVM guests. The second configuration change is where I am having trouble. For the second change I need to set the kernel boolean net.ipv4.conf.pvt0.route_localnet to be true to allow routing of the 127.0.0.0/8 on the libvirt net device that I have configured to use addresses on the 127.0.0.0/8 network. Normally I would do this by adding "net.ipv4.conf.pvt0.route_localnet = 1" to /etc/sysctl.conf but this does not work because the libvirt pvt0 device does not exist when the settings in the /etc/sysctl.conf are done. My question is where can I add the command "/sbin/sysctl -w net.ipv4.conf.pvt0.route_localnet=1" to the start-up files so the command is run after the libvirt device pvt0 has been autostarted? I am running on RHEL 6.4 x86_64. --jim

2 2

[libvirt-users] [virt-tools-list] How to solve the UID repeatetion problem of virt-clone one WINDOWS virtual machine
by cochen 14 Jun '13

14 Jun '13

Hi all: If I use "virt-clone" to clone a windows virtual machine , the new windows vm is sure be have a uid which the same with the source windows. How can I make them difference auto? Best regards; chencong

1 0

[libvirt-users] [virt-tools-list] How to solve the UID repeatetion problem of virt-clone one WINDOWS virtual machine
by cochen 14 Jun '13

14 Jun '13

Hi all: If I use "virt-clone" to clone a windows virtual machine , the new windows vm is sure be have a uid which the same with the source windows. How can I make them difference auto? Best regards; chencong

1 0

[libvirt-users] can virsh set the cpuset attribute of <vcpu ..> (CPU Allocation) ?
by Edoardo Comar 14 Jun '13

14 Jun '13

Is it possible to use virsh to set the cpuset attribute of the CPU Allocation element in a domain ? <domain> ... <vcpu placement='static' cpuset="1-4,^3,6" current="1">2</vcpu> ... </domain> I have seen that virsh vcpupin and virsh emulatorpin can be used to query and set the cpusets of the <vcpupin> and <emulatorpin> children elements of <cputune> which override the cpuset of <vcpu>. If i did not have to pin to different PCPUs, I would execute just one command for the whole domain rather than one command per VCPU + one per the emulator threads. Thanks! -------------------------------------------------- regards, Edoardo Comar WebSphere Application Service Platform for Networks (ASPN) ecomar(a)uk.ibm.com IBM UK Ltd, Hursley Park, SO21 2JN Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU

1 0

Re: [libvirt-users] How to mount / use a hard disk partition for libvirt instead of created a new virtual disk
by Roland Giesler 13 Jun '13

13 Jun '13

I change the topic to be more descriptive. I hope this doesn't break the message threading of this list! On Thu, Jun 13, 2013 at 8:48 PM, Roland Giesler <roland(a)giesler.za.net> wrote: > Surely there must be someone here that knows how to do this? Maybe > someone that has used some other partition type in this way? > > On Mon, Jun 10, 2013 at 10:06 PM, Roland Giesler <roland(a)giesler.za.net> wrote: >> I'm running Ubuntu desktop 12.10 with libvirt and virt-manager (gui). >> >> I have been led to believe that it is possible to use and existing partition >> as the disk storage volume for a virtual machine. >> >> The windows partition is /dev/sda2, but if I use fs: Pre-formatted Block >> Device I can select the partion. What I can't figure out is how to tell the >> vitual machine to use this volume. >> >> I tried with virt-manager, but the only options I have are >> >> * Local media >> * Network install >> * Network Boot >> * Import Existing Disk Image >> >> How can I do this? >> >> regards >> >> Roland Giesler >>

1 0