- Users - libvirt List Archives

[libvirt-users] Fwd: Re: Attach libvirt guest to an existing openvswitch port
by Ivan Borodin 26 Nov '16

26 Nov '16

Thank you, Laine for you time and patience to give me a detailed answer. I missed the interfaceid parameter in the docs, but now I didn't manage to get it working. > http://www.libvirt.org/formatdomain.html The docs state: "The Open vSwitch type virtualport accepts two parameters in its <parameters> element - an interfaceid which is a standard uuid used to uniquely identify this particular interface to Open vSwitch (if you do not specify one, a random interfaceid will be generated for you when you first define the interface[...]" This interfaceid doesn't seem to have anything to do with ovsdb values. $ ovs-vsctl find Port 'name=vm_test' _uuid : f0f06327-6fcc-4073-b8c8-3f42944d43ca bond_downdelay : 0 bond_fake_iface : false bond_mode : [] bond_updelay : 0 external_ids : {} fake_bridge : false interfaces : [eb7fad6e-3728-4bf7-b31e-4a1693e2ec4b] lacp : [] mac : [] name : "vm_test" other_config : {} qos : [] statistics : {} status : {} tag : [] trunks : [] vlan_mode : [] The "_uuid" is ovsdb internal id of a record. If you take "interfaces" value for "interfaceid", libvirt will silently create its own new ovs port, with its own new uuid and defining a libvirt guest's interface with a unique uuid in "interfaceid"... Libvirt will create a new ovs port, and the ovsdb-"interfaces" value will be the interfaceid... And I could not find anything specific about this ovsdb/Port/interfaces. Actually, my point was to find a way to control ovs vlans outside libvirt. Since virsh doesn't have capabilities to edit interface's vlan options, the only way to do it is editing domains' xml-configs through virsh-edit, which is a bit tiresome. (By the way, there must be some technical reason(beyond virt-xml-validate) for designing libvirt writing it's own configuration files instead of reading them...) There should be.. There must be a way to do this. Port parameters are ovs authority. If there is no such way, could you, please, tell me the reason. On 11/21/2016 09:46 PM, Laine Stump wrote: > On 11/13/2016 01:23 PM, Ivan Borodin wrote: >> Somehow with interface types 'bridge' and 'network', libvirt does attach >> domain to the existing port specified in <target dev=''/>, wiping the >> exixting settings and always deletes this port upon domain shutdown, >> thus making me loose ovs configuration.

1 0

[libvirt-users] virt-manager wont connect to remote libvirt instance
by bherman 24 Nov '16

24 Nov '16

I am using virt-manager on debian 8 and I am remotely connecting to a libvirt instance on a server. It was all working fine until today when I discovered that I cannot remotely connect to the libvirt server anymore. ● libvirtd.service - Virtualization daemon Loaded: loaded (/lib/systemd/system/libvirtd.service; enabled) Active: active (running) since Tue 2016-11-22 10:27:09 CST; 46min ago Docs: man:libvirtd(8) http://libvirt.org Process: 27630 ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS) Main PID: 27823 (libvirtd) CGroup: /system.slice/libvirtd.service ├─ 4787 /usr/sbin/libvirtd ├─ 8187 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --dhcp-script=/usr/lib/libvi... ├─ 8188 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --dhcp-script=/usr/lib/libvi... └─27823 /usr/sbin/libvirtd It says it is running however I cant connect to it either remotely or on the server using virt-manager. When I do a virsh --list It just hangs and doesn't output anything. Any ideas? -- Thanks, Brian Herman IT O: (773)299-7557 F: (773)299-7505

2 2

[libvirt-users] Routed mode problem with SSH
by Marcelo Palma 23 Nov '16

23 Nov '16

Hi guys, I describe the context of the problem below: I installed a Tor relay on a virtual machine on my server with IP 9.1.1.101. This virtual machine needs to use a static IP (9.1.1.102) to work as a Tor relay. After that I create a virtual network in *Routed mode* to connect to the physical network (used as a bridge between the virtual machine and the external network (Internet)). Since I change the NAT to Routed mode, I can't access my server via ssh user(a)9.1.1.101. Will it be a Routed mode problem? How can I solve this problem? Thank you Marcelo

1 0

[libvirt-users] blockcommit and gluster network disk path
by Sahina Bose 22 Nov '16

22 Nov '16

Hi, I'm running into problems with blockcommit and gluster network disks - wanted to check how to pass path for network disks. How's the protocol and host parameters specified? For a backing volume chain as below, executing virsh blockcommit fioo5 vmstore/912d9062-3881-479b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4/027a3b37-77d4-4fa9-8173-b1fedba1176c --base vmstore/912d9062-3881-479b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4/d4c23ec6-20ce-4a2f-9b32-ca91e65a114a --top vmstore/912d9062-3881-479b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4/027a3b37-77d4-4fa9-8173-b1fedba1176c --verbose --wait gives "error: invalid argument: No device found for specified path". <disk type='network' device='disk' snapshot='no'> <driver name='qemu' type='qcow2' cache='none' error_policy='stop' io='threads'/> <source protocol='gluster' name='vmstore/912d9062-3881-47 9b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6 d8a4/027a3b37-77d4-4fa9-8173-b1fedba1176c'> <host name='10.70.37.28' port='0'/> </source> <backingStore type='network' index='1'> <format type='qcow2'/> <source protocol='gluster' name='vmstore/912d9062-3881-47 9b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6 d8a4/d4c23ec6-20ce-4a2f-9b32-ca91e65a114a'> <host name='10.70.37.28' port='0'/> </source> <backingStore type='network' index='2'> <format type='raw'/> <source protocol='gluster' name='vmstore/912d9062-3881-47 9b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6 d8a4/f5098809-e719-404b-8d80-3f824f4333a2'> <host name='10.70.37.28' port='0'/> </source> <backingStore/> </backingStore> </backingStore> <target dev='vda' bus='virtio'/> <serial>27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4</serial> <boot order='2'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </disk> thanks sahina

1 1

[libvirt-users] Attach libvirt guest to an existing openvswitch port
by Ivan Borodin 22 Nov '16

22 Nov '16

Good day gentlemen. I am building a study project and trying to configure openvswitch vlans outside libvirt by means of openvswitch itself. Somehow with interface types 'bridge' and 'network', libvirt does attach domain to the existing port specified in <target dev=''/>, wiping the exixting settings and always deletes this port upon domain shutdown, thus making me loose ovs configuration. Could you, please, tell me how should I configure an interface or libvirt itself to avoid this libvirt's greedines. libvirt 2.4.0 Thak you. Ivan.

2 1

[libvirt-users] export a cert
by lejeczek 21 Nov '16

21 Nov '16

hi everybody I'm browsing around but probably missing that obvious little thing - exporting certs to pem format with ipa command toolkit - that must be there somewhere, right? thanks, L.

2 1

[libvirt-users] ergodox keyboard not working on USB hostdev passthrough
by Paul Handy 16 Nov '16

16 Nov '16

I'm using a bit of a different keyboard, the infinity ergodox [ https://input.club/devices/infinity-ergodox/] It functions just fine as a keyboard on my host computer, but when I try to bind it to the guest, nothing seems to happen. lsusb gives its ID: Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub *Bus 005 Device 003: ID 1c11:b04d* Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 258a:0001 Bus 001 Device 002: ID 093a:2521 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 004: ID 8087:0a2b Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub So, I made a file, hostdev-1c11:b04d.xml, which contains the following: <hostdev mode='subsystem' type='usb' > <source> <vendor id='0x1c11'/> <product id='0xb04d'/> </source> </hostdev> Note, I have had this same xml inside the domain's xml, but have pulled it out separately so that I could run: virsh attach-device linux-x86_64 hostdev-1c11:b04d.xml It appears to attach the device, as it becomes visible in the domain's lsusb: Bus 001 Device 001: ID 1d6b:0002 Bus 004 Device 001: ID 1d6b:0001 *Bus 003 Device 003: ID 1c11:b04d * Bus 003 Device 001: ID 1d6b:0001 Bus 002 Device 003: ID 093a:2521 Bus 002 Device 002: ID 258a:0001 Bus 002 Device 001: ID 1d6b:0001 The mouse works just fine. I bought a cheap keyboard to test out, and it works just fine. My pet keyboard, however, doesn't work on the guest. Nothing seems to register. Any ideas here what I could do? Drivers? ROM's? I've tried both SeaBIOS and OVMF with no difference in outcome, and while this appears to be a hardware problem, I don't know where to begin. Thanks, Paul

2 1

[libvirt-users] BroadCom NIC not adding as PassThrough device
by Tahir Masood 16 Nov '16

16 Nov '16

Hi Guys, I am trying to add a Broadcom Physical NIC to a virtual Machine as Passthrough device. However I am getting following error. Error starting domain: unsupported configuration: host doesn't support passthrough of host PCI devices Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/asyncjob.py", line 124, in tmpcb callback(*args, **kwargs) File "/usr/share/virt-manager/virtManager/libvirtobject.py", line 83, in newfn ret = fn(self, *args, **kwargs) File "/usr/share/virt-manager/virtManager/domain.py", line 1404, in startup self._backend.create() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1035, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: unsupported configuration: host doesn't support passthrough of host PCI devices libvirt allows to appply the changes to the VM xml configurations, but gives error the moment I try to start the VM. I have tried following approaches. 1- Open Virt-Manager, Shutdown VM, edit VM , add PCI hardware device , locate BroadCom NIC, apply changes. Then I restart the VM. 2- Also tried to add following XML tags one by one using 'virsh edit', but got same error. Tag -1 <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/> </source> </hostdev> Tag -2 <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x1'/> </source> </interface> The detail of the BroadCOm NIC are as follows. 02:00.1 Ethernet controller: Broadcom Limited NetXtreme II BCM5709 Gigabit Ethernet (rev 20) What would it take to add this NIC to VM as Passthrough Device? Regards, Tahir Masood Senior Engineer, xFlow Research Inc. +92-300-9779473 <mailto:tahir.masood@xflowresearch.com> tahir.masood(a)xflowresearch.com <http://www.xflowresearch.com/> www.xflowresearch.com

2 1

[libvirt-users] how to use command 'guest-file-open' for Windows server 2012R2 vm
by 刘梦可 09 Nov '16

09 Nov '16

hello, I am using libvirt 1.2.17 on CentOS 7.2 - kernel 3.10.0-327.13.1.el7.x86_64. The command guest-file-open failed to open with error "this feature or command is not currently supported", the detail is as below: virsh qemu-agent-command instance-00000015 "{\"execute\":\"guest-file-open\", \"arguments\":{\"path\":\"\tmp.txt\",\"mode\":\"r\"}}" error: internal error: unable to execute QEMU agent command 'guest-file-open': this feature or command is not currently supported. The guest instance-00000015 is a Windows server 2012R2, and I installed the qemu-guest-agent by the file qemu-ga-x64.msi from virtio-win-0.1.126. It can be running in guest. Doesn't the qemu-guest-agent in Windows VM support guest-file-* commands? How or when can I use the command guest-file-* command? Thanks very much!! -mkliu28

2 2

[libvirt-users] sttic vnet device for guest
by Anton Gorlov 09 Nov '16

09 Nov '16

Can i assign static vnet* device for some guests?

4 9