- Users - libvirt List Archives

[libvirt-users] KVM NAT stops from working
by Francesc Guasch 04 Sep '19

04 Sep '19

Hi. First of all thank you for the work you are doing with libvirt. I am not sure this is the right place to ask, I'd appreciate if you can give me any hint or directions. I have several similar KVM Linux boxes and one of them has a really strange behavior with the KVM NAT: It just suddenly stops from working. This is a Linux Ubuntu Server 19.04 with - libvirt-bin 4.0.0 - qemu-kvm 1:2.11 Everything works fine and then suddenly the virtual machines can't reach outside. If I run a tcpdump in the host I see the NAT isn't working. When the server just boots I can see the packets with the server address going out: x.y.z.w.49138 > 8.8.8.8.53 Then, it may be some hours or days later, instead the server address I see the internal domains address: 192.168.122.33.19132 > 8.8.8.8.53 ^^^^^^^^^^^^^^ I try to restart the iptables but it won't help. Any hints ? Thank you very much

3 3

[libvirt-users] virsh list -all zombies
by ofoerster＠posteo.de 29 Aug '19

29 Aug '19

Hello Community, I have a problem with two deleted KVMs. So far we have done everything that is necessary: virsh undefine [kvm-name] --managed-save --snapshots-metadata --remove-all-storage --nvram virsh destroy [kvm-name] and we delete the xml-File and the .img. If we now call "virsh list -all", then the machines are also gone. However, after a restart of libvirtd they reappear in the list, like zombies. What did we do wrong? Or is that even a bug? Kind regards, Oliver

1 1

[libvirt-users] [libvirtd] qemu_process: reset CPU affinity to all enabled CPUs, when runs in custom cpuset
by Valentina Krasnobaeva 29 Aug '19

29 Aug '19

Hello All, Since 4.5.0-23.el7 version (Red Hat 7.7), when I launch pinned VM, libvirtd reset CPU affinity to all enabled in host CPUs, if it runs in custom cpuset. I can't reproduce this behavior with 4.5.0-10.el7_6.12 with the same kernel version (Red Hat 7.7). Libvirt runs in a custom cpuset 'libvirt', where the number of available cpus is restricted to 0,2,4,6,8. And this 'libvirt' cpuset is created in a system with total cpus number: 40 (all cpus are enabled in BIOS) and I have '0-39' range in /sys/fs/cgroup/cpuset/cpuset.cpus. When a VM with pinned vcpus is launched, VM XML config is in attachement: <vcpu placement='static'>2</vcpu> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='6'/> I have the following error: # virsh create /tmp/vm1_2vms-2cores_host1.xml error: Failed to create domain from /tmp/vm1_2vms-2cores_host1.xml error: Unable to write to '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.cpus': Permission denied And in the debug log I can see, that /sys/fs/cgroup/cpuset/machine.slice was created with a proper cpuset list: 0,2,4,6,8. This list at the beginning was successfully inherited and set in /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.cpus. But finally libvirtd tries to reset inherited cpus and set there: "0-39" 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupDetect:747 : Detected mount/mapping 0:cpu at /sys/fs/cgroup/cpu,cpuacct in /machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator for pid -1 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupDetect:747 : Detected mount/mapping 1:cpuacct at /sys/fs/cgroup/cpu,cpuacct in /machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator for pid -1 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupDetect:747 : Detected mount/mapping 2:cpuset at /sys/fs/cgroup/cpuset in /machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator for pid -1 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupMakeGroup:1049 : Make group /machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupMakeGroup:1073 : Make controller /sys/fs/cgroup/cpu,cpuacct/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/ 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupMakeGroup:1073 : Make controller /sys/fs/cgroup/cpu,cpuacct/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/ 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupMakeGroup:1073 : Make controller /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/ 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupCpuSetInherit:989 : Setting up inheritance /machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope -> /machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupGetValueStr:832 : Get value /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/cpuset.cpus 2019-08-28 15:11:03.357+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupCpuSetInherit:999 : Inherit cpuset.cpus = 0,2,4,6,8 2019-08-28 15:11:03.357+0000: 25536: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.cpus' to '0,2,4,6,8' 2019-08-28 15:11:03.358+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupGetValueStr:832 : Get value /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/cpuset.mems 2019-08-28 15:11:03.358+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupCpuSetInherit:999 : Inherit cpuset.mems = 0-1 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.mems' to '0-1' 2019-08-28 15:11:03.358+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupGetValueStr:832 : Get value /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/cpuset.memory_migrate 2019-08-28 15:11:03.358+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupCpuSetInherit:999 : Inherit cpuset.memory_migrate = 1 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.memory_migrate' to '1' 2019-08-28 15:11:03.358+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller memory 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller devices 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller freezer 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller blkio 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller net_cls 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller perf_event 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1055 : Not creating systemd controller group 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupMakeGroup:1126 : Done making controllers for group 2019-08-28 15:11:03.358+0000: 25536: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.cpus' to '0-39' 2019-08-28 15:11:03.358+0000: 25536: debug : virFileClose:111 : Closed fd 27 2019-08-28 15:11:03.358+0000: 25536: error : virCgroupSetValueStr:806 : Unable to write to '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.cpus': Permission denied The same log snippet with 4.5.0-10.el7_6.12 version, everything works well: 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupDetect:747 : Detected mount/mapping 0:cpu at /sys/fs/cgroup/cpu,cpuacct in /machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1 for pid -1 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupDetect:747 : Detected mount/mapping 1:cpuacct at /sys/fs/cgroup/cpu,cpuacct in /machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1 for pid -1 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupDetect:747 : Detected mount/mapping 2:cpuset at /sys/fs/cgroup/cpuset in /machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1 for pid -1 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupMakeGroup:1049 : Make group /machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupMakeGroup:1073 : Make controller /sys/fs/cgroup/cpu,cpuacct/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/ 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupMakeGroup:1073 : Make controller /sys/fs/cgroup/cpu,cpuacct/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/ 2019-08-28 16:13:22.837+0000: 26937: debug : virCgroupMakeGroup:1073 : Make controller /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/ 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupCpuSetInherit:989 : Setting up inheritance /machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope -> /machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupGetValueStr:832 : Get value /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/cpuset.cpus 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupCpuSetInherit:999 : Inherit cpuset.cpus = 0,2,4,6,8 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/cpuset.cpus' to '0,2,4,6,8' 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupGetValueStr:832 : Get value /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/cpuset.mems 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupCpuSetInherit:999 : Inherit cpuset.mems = 0-1 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/cpuset.mems' to '0-1' 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupGetValueStr:832 : Get value /sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/cpuset.memory_migrate 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupCpuSetInherit:999 : Inherit cpuset.memory_migrate = 1 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/cpuset.memory_migrate' to '1' 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller memory 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller devices 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller freezer 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller blkio 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller net_cls 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1062 : Skipping unmounted controller perf_event 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1055 : Not creating systemd controller group 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupMakeGroup:1126 : Done making controllers for group 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/cpuset.mems' to '0' 2019-08-28 16:13:22.838+0000: 26937: debug : virFileClose:111 : Closed fd 29 2019-08-28 16:13:22.838+0000: 26937: debug : virCgroupSetValueStr:796 : Set value '/sys/fs/cgroup/cpu,cpuacct/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/vcpu1/tasks' to '27045' Would someone give me a hint, please, if we need to change settings lied to NUMA or vCPUs in VM XML config according to last changed in libvirtd ? Please, find a bug report about this issue here: https://bugzilla.redhat.com/show_bug.cgi?id=1746517 I suppose, that this may be an impact of one of the following patches applied to 4.5.0-10.el7_6.12 source code version: libvirt-qemu-Rework-setting-process-affinity.patch libvirt-qemu-Fix-qemuProcessInitCpuAffinity.patch libvirt-qemu-Fix-NULL-pointer-access-in-qemuProcessInitCpuAffinity.patch libvirt-qemu-Fix-leak-in-qemuProcessInitCpuAffinity.patch How reproducible: Always Steps to Reproduce: 1. create a cpuset with reduced cpus list and launch libvirtd in it 2. prepare VM XML with pinned vcpus and <numatune> setting 3. virsh create vm.xml Actual results: error: Failed to create domain from /tmp/vm1_2vms-2cores_host1.xml error: Unable to write to '/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d1\x2dvm12vms\x2d2coreshost1.scope/emulator/cpuset.cpus': Permission denied Expected results: should work as with a previous version 4.5.0-10.el7_6.12. Additional info: # ps auxf | grep libvirt root 24571 2.3 0.0 1895564 28052 ? Ssl 16:52 0:00 /usr/sbin/libvirtd # grep Cpus_allowed /proc/24571/task/*/status /proc/24571/task/24571/status:Cpus_allowed: 00,00000554 /proc/24571/task/24571/status:Cpus_allowed_list: 2,4,6,8,10 /proc/24571/task/24572/status:Cpus_allowed: 00,00000554 /proc/24571/task/24572/status:Cpus_allowed_list: 2,4,6,8,10 /proc/24571/task/24573/status:Cpus_allowed: 00,00000554 /proc/24571/task/24573/status:Cpus_allowed_list: 2,4,6,8,10 /proc/24571/task/24574/status:Cpus_allowed: 00,00000554 /proc/24571/task/24574/status:Cpus_allowed_list: 2,4,6,8,10 /proc/24571/task/24575/status:Cpus_allowed: 00,00000554 .. for all threads Processor: "Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz" Sockets: 2, Cores: 20, HyperThreads: 40 socket 0 socket 1 +---------------------+ +---------------------+ | c0 c1 | | c0 c1 | | +-------+ +-------+ | | +-------+ +-------+ | | | 0| 20| | 2| 22| | | | 1| 21| | 3| 23| | | +-------+ +-------+ | | +-------+ +-------+ | | c2 c3 | | c2 c3 | | +-------+ +-------+ | | +-------+ +-------+ | | | 4| 24| | 6| 26| | | | 5| 25| | 7| 27| | | +-------+ +-------+ | | +-------+ +-------+ | | c4 c8 | | c4 c8 | | +-------+ +-------+ | | +-------+ +-------+ | | | 8| 28| | 10| 30| | | | 9| 29| | 11| 31| | | +-------+ +-------+ | | +-------+ +-------+ | | c9 c10 | | c9 c10 | | +-------+ +-------+ | | +-------+ +-------+ | | | 12| 32| | 14| 34| | | | 13| 33| | 15| 35| | | +-------+ +-------+ | | +-------+ +-------+ | | c11 c12 | | c11 c12 | | +-------+ +-------+ | | +-------+ +-------+ | | | 16| 36| | 18| 38| | | | 17| 37| | 19| 39| | | +-------+ +-------+ | | +-------+ +-------+ | +---------------------+ +---------------------+ # cat /sys/fs/cgroup/cpuset/cpuset.cpus 0-39 # cat /sys/fs/cgroup/cpuset/libvirt/cpuset.cpus 2,4,6,8,10 # cat /sys/fs/cgroup/cpuset/machine.slice/cpuset.cpus 0,2,4,6,8

1 0

[libvirt-users] CPU and Memory requirements for host OS ( CentOS 7.6) on Dell Poweredge R630 server
by Kaushal Shriyan 27 Aug '19

27 Aug '19

Hi, I am running Dell R630 Poweredge 1U with 32 cores vCPU's and 96 GB RAM. What should be the minimum numbers of CPU cores and memory that should be reserved for host OS (CentOS 7.6) and the remaining CPU cores and memory resources to be allocated for Guest OS? I look forward to hearing from you and thanks in advance. Best Regards, Kaushal

3 3

[libvirt-users] RLIMIT_MEMLOCK in container environment
by Ihar Hrachyshka 24 Aug '19

24 Aug '19

Hi all, KubeVirt uses libvirtd to manage qemu VMs represented as Kubernetes API resources. In this case, libvirtd is running inside an unprivileged pod, with some host mounts / capabilities added to the pod, needed by libvirtd and other services. One of the capabilities libvirtd requires for successful startup inside a pod is SYS_RESOURCE. This capability is used to adjust RLIMIT_MEMLOCK ulimit value depending on devices attached to the managed guest, both on startup and during hotplug. AFAIU the need to lock the memory is to avoid pages being pushed out from RAM into swap. In KubeVirt world, several libvirtd assumptions do not apply: 1. In Kubernetes environments, swap is usually disabled. (e.g. kubeadm official deployment tool won't even initialize a cluster until you disable it.) This is documented in lots of places, f.e.: https://docs.platform9.com/kubernetes/disabling-swap-kubernetes-node/ (note: while it's vendor docs, regardless it's well known community recommendation.) 2. hotplug is not supported. Domain definition is stable through its whole lifetime. We are working on a series of patches that would remove the need for SYS_RESOURCE capability from the pod running libvirtd: https://github.com/kubevirt/kubevirt/pull/2584 We achieve it by making another, *privileged* component to set RLIMIT_MEMLOCK for libvirtd process using prlimit() syscall, using the value that is higher than the final value libvirtd uses with setrlimit() [Linux kernel will allow to lower the value without the capability.] Since the formula to calculate the actual MEMLOCK value is embedded in libvirt and is not simple to reproduce outside, we pick the upper limit value set for libvirtd process quite conservatively even if ideally we would use the exact same value as libvirtd would do. The estimation code is here: https://github.com/kubevirt/kubevirt/pull/2584/files#diff-6edccf5f0d11c09e7… While the solution works, there are some drawbacks: 1. the value we use for prlimit() is not exactly equal to the final value used by libvirtd; 2. we are doing all this work in environment that is not prone to issues because of disabled swap space. I believe we would benefit from one of the following features on libvirt side (or both): a) expose the memory lock value calculated by libvirtd through libvirt ABI so that we can use it when calling prlimit() on libvirtd process; b) allow to disable setrlimit() calls via libvirtd config file knob or domain definition. Do you think it would be acceptable to have one of these enhancements in libvirtd, or perhaps both, for degenerate cases like KubeVirt? Thanks for attention, Ihar

4 7

Re: [libvirt-users] Compiling Libvirt on Windows for Hyper V support
by Daniel P. Berrangé 21 Aug '19

21 Aug '19

Re-adding the mailing list CC - please don't drop it. On Tue, Aug 20, 2019 at 11:54:34AM -0400, reza shahriari wrote: > Hi, > > I am using msys2. When I run `./configure` without any parameters and I still see missing pthreads impl. > > I have installed mingw64 cross compiler toolchain. Here is the output of pacman I see when searching for pthreads (they are all installed). > > mingw64/mingw-w64-x86_64-libwinpthread-git 7.0.0.5480.e14d23be-1 (mingw-w64-x86_64-toolchain) [installed] > MinGW-w64 winpthreads library > mingw64/mingw-w64-x86_64-winpthreads-git 7.0.0.5480.e14d23be-1 (mingw-w64-x86_64-toolchain) [installed] > MinGW-w64 winpthreads library > msys/mingw-w64-cross-winpthreads-git 7.0.0.5480.b627284b-1 (mingw-w64-cross-toolchain mingw-w64-cross) [installed] > MinGW-w64 winpthreads library for cross-compiler > > > Also, is there any another way to enable hyper-v domains on Libvirt ? The pthreads library is a mandatory part of libvirt, so we can't skip that. Can you provide your "config.log" file - if it is larger than 200 KB, please compress it, or upload it somewhere Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|

2 6

[libvirt-users] Starting VM fails with: "Setting different DAC user or group on /path... which is already in use" after upgrading to libvirt 5.6.0-1
by Nir Soffer 20 Aug '19

20 Aug '19

Hi, I upgraded to a Fedora 29 host using virt-preview repo to libvirt-daemon-5.6.0-1.fc29.x86_64 The host was using plain Fedora 29 without virt-preview before that. After the upgrade, starting some vms that were running fine fail now with this error: Error starting domain: internal error: child reported (status=125): Requested operation is not valid: Setting different DAC user or group on /home/libvirt/images/voodoo4-os.img which is already in use Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 75, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/asyncjob.py", line 111, in tmpcb callback(*args, **kwargs) File "/usr/share/virt-manager/virtManager/object/libvirtobject.py", line 66, in newfn ret = fn(self, *args, **kwargs) File "/usr/share/virt-manager/virtManager/object/domain.py", line 1279, in startup self._backend.create() File "/usr/lib64/python3.7/site-packages/libvirt.py", line 1089, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirt.libvirtError: internal error: child reported (status=125): Requested operation is not valid: Setting different DAC user or group on /home/libvirt/images/voodoo4-os.img which is already in use These vms we created by creating one vm, and the cloning the vms. I tried to delete the disks and add them back in one of the vms, but the vm still fail with the same error. I hope that someone have a clue what is the issue, and how it can be fixed. Here some details about the setup: vm1: <domain type='kvm'> <name>voodoo4</name> <uuid>0b3aa57a-00b6-4e99-81f9-8f216f85ccaf</uuid> <title>voodoo4 (fedora 29, gluster)</title> <metadata> <libosinfo:libosinfo xmlns:libosinfo=" http://libosinfo.org/xmlns/libvirt/domain/1.0"> <libosinfo:os id="http://fedoraproject.org/fedora/29"/> </libosinfo:libosinfo> </metadata> <memory unit='KiB'>2097152</memory> <currentMemory unit='KiB'>2097152</currentMemory> <vcpu placement='static'>2</vcpu> <os> <type arch='x86_64' machine='pc-q35-3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <vmport state='off'/> </features> <cpu mode='host-model' check='partial'> <model fallback='allow'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <pm> <suspend-to-mem enabled='no'/> <suspend-to-disk enabled='no'/> </pm> <devices> <emulator>/usr/bin/qemu-kvm</emulator> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='sda' bus='sata'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/home/libvirt/images/voodoo4-os.img'/> <target dev='vda' bus='virtio'/> <serial>os</serial> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/home/libvirt/images/voodoo4-gv0.img'/> <target dev='vdb' bus='virtio'/> <serial>gv0</serial> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/home/libvirt/images/voodoo4-gv1.img'/> <target dev='vdc' bus='virtio'/> <serial>gv1</serial> <address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/> </disk> <controller type='usb' index='0' model='qemu-xhci' ports='15'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0x14'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0x15'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x5'/> </controller> <controller type='pci' index='7' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='7' port='0x16'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x6'/> </controller> <controller type='pci' index='8' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='8' port='0x17'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x7'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:dd:a4:5c'/> <source bridge='ovirt'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <channel type='spicevmc'> <target type='virtio' name='com.redhat.spice.0'/> <address type='virtio-serial' controller='0' bus='0' port='2'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='spice' autoport='yes'> <listen type='address'/> </graphics> <sound model='ich9'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/> </sound> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </video> <redirdev bus='usb' type='spicevmc'> <address type='usb' bus='0' port='2'/> </redirdev> <redirdev bus='usb' type='spicevmc'> <address type='usb' bus='0' port='3'/> </redirdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/> </memballoon> <rng model='virtio'> <backend model='random'>/dev/urandom</backend> <address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/> </rng> </devices> </domain> vm 2: <domain type='kvm'> <name>voodoo5</name> <uuid>8ded8ea2-6524-4fc0-94f6-31667338a5f2</uuid> <title>voodoo5 (fedora 29, gluster)</title> <metadata> <libosinfo:libosinfo xmlns:libosinfo=" http://libosinfo.org/xmlns/libvirt/domain/1.0"> <libosinfo:os id="http://fedoraproject.org/fedora/29"/> </libosinfo:libosinfo> </metadata> <memory unit='KiB'>2097152</memory> <currentMemory unit='KiB'>2097152</currentMemory> <vcpu placement='static'>2</vcpu> <os> <type arch='x86_64' machine='pc-q35-3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <vmport state='off'/> </features> <cpu mode='host-model' check='partial'> <model fallback='allow'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <pm> <suspend-to-mem enabled='no'/> <suspend-to-disk enabled='no'/> </pm> <devices> <emulator>/usr/bin/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/home/libvirt/images/voodoo5-os.img'/> <target dev='vda' bus='virtio'/> <serial>os</serial> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/home/libvirt/images/voodoo5-gv0.img'/> <target dev='vdb' bus='virtio'/> <serial>gv0</serial> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/home/libvirt/images/voodoo5-gv1.img'/> <target dev='vdc' bus='virtio'/> <serial>gv1</serial> <address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='sda' bus='sata'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0' model='qemu-xhci' ports='15'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0x14'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0x15'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x5'/> </controller> <controller type='pci' index='7' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='7' port='0x16'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x6'/> </controller> <controller type='pci' index='8' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='8' port='0x17'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x7'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:53:6a:b4'/> <source bridge='ovirt'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <channel type='spicevmc'> <target type='virtio' name='com.redhat.spice.0'/> <address type='virtio-serial' controller='0' bus='0' port='2'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='spice' autoport='yes'> <listen type='address'/> </graphics> <sound model='ich9'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/> </sound> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </video> <redirdev bus='usb' type='spicevmc'> <address type='usb' bus='0' port='2'/> </redirdev> <redirdev bus='usb' type='spicevmc'> <address type='usb' bus='0' port='3'/> </redirdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/> </memballoon> <rng model='virtio'> <backend model='random'>/dev/urandom</backend> <address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/> </rng> </devices> </domain> ls -lhZ /home/libvirt/images/voodoo4* # ls -lhZ /home/libvirt/images/voodoo4* -rw-------. 1 root root system_u:object_r:virt_image_t:s0 20G Aug 17 03:55 /home/libvirt/images/voodoo4-gv0.img -rw-------. 1 root root system_u:object_r:virt_image_t:s0 20G Aug 17 03:55 /home/libvirt/images/voodoo4-gv1.img -rw-------. 1 root root system_u:object_r:virt_image_t:s0 50G Aug 17 03:52 /home/libvirt/images/voodoo4-os.img cat /etc/libvirt/storage/images.xml  The related pool: <pool type='dir'> <name>images</name> <uuid>f7190095-947d-442b-b94b-4a99790795bc</uuid> <capacity unit='bytes'>0</capacity> <allocation unit='bytes'>0</allocation> <available unit='bytes'>0</available> <source> </source> <target> <path>/home/libvirt/images</path> <permissions> <mode>0755</mode> <owner>-1</owner> <group>-1</group> </permissions> </target> </pool> Nir

2 2

[libvirt-users] Compiling Libvirt on Windows for Hyper V support
by reza shahriari 20 Aug '19

20 Aug '19

Hi, I am trying to compile Libvirt from the source code on windows using msys2 but keep hitting issues while running `./configure`. …. > checking whether C compiler handles -Wno-suggest-attribute=pure… yes > checking whether C compiler handles -Wno-suggest-attribute=const... yes > checking for how to force completely read-only GOT table… > checking for how to avoid indirect lib deps... -Wl,--no-copy-dt-needed-entries > checking for how to stop undefined symbols at link time… > checking sys/acl.h usability... no > checking sys/acl.h presence… no > checking for sys/acl.h… no > checking for aa_change_profile in -lapparmor… no > checking for pthread_mutexattr_init… no > checking for pthread.h... (cached) no > configure: error: A pthreads impl is required for building libvirt ... Does anyone have any experience compiling Libvirt on a windows machine ? Specifically I am trying to enable hyper-v domain on Libvirt. Thanks, Reza Shahriari

3 4

[libvirt-users] Libvirt API for attaching volume to domain
by Varsha Verma 15 Aug '19

15 Aug '19

Hi, I wanted to know if there is any Python API exposed for libvirt using which I can attach a libvirt volume to a libvirt domain/VM. I intend to do something similar to the `attach-disk` command of virsh using python. -- *Regards,* *Varsha Verma* *Final Year Undergraduate* *Department of Electrical Engineering* *IIT-BHU, Varanasi*

3 4

[libvirt-users] does virsh have a history with timestamps ?
by Lentes, Bernd 13 Aug '19

13 Aug '19

Hi, i knwo that virsh has its own history, but are somewhere the respective timestamps logged ? Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 phone: +49 89 3187 3827 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg Perfekt ist wer keine Fehler macht Also sind Tote perfekt Helmholtz Zentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH) Ingolstaedter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir'in Prof. Dr. Veronika von Messling Geschaeftsfuehrung: Prof. Dr. med. Dr. h.c. Matthias Tschoep, Heinrich Bassler, Kerstin Guenther Registergericht: Amtsgericht Muenchen HRB 6466 USt-IdNr: DE 129521671

2 1