- Users - libvirt List Archives

libvirtd file descriptors leaking
by Дмитрий 01 Mar '22

01 Mar '22

Hello, ## SETUP CentOS 8 Stream libguestfs-tools.noarch 1:1.40.2-24.el8.plesk libvirt.x86_64 7.6.0-6.el8s ## ISSUE REPRODUCTION lsof -p $(cat /run/libvirtd.pid) | wc -l # here we have N open file descriptors by libvirtd guestfish --ro -d domain1 run # here we have N+1 open file descriptors by libvirtd Ctrl+D # and we still have N+1 open file descriptors by libvirtd virt-df -d domain1 # after completion we still having N++ open file descriptors by libvirtd To fix this issue i am force to restart libvirtd

3 7

QEMU args generation order with libvirt
by M, Shivakumar 28 Feb '22

28 Feb '22

Hello, We are trying to bring up the Android VM with Libvirt, as part of this exercise it is advised to keep Replay Protected Memory Block (RPMB) device as the first virtio device in the QEMU arg list, as the secure storage daemon in Andriod side communicates with dev/vport0p1 for RPMB usage. Is there any way we can make a qemu commands generation in particular order with Libvirt XML ? Thanks, Shivakumar M

2 1

virtio 3d acceleration - centOS 9 - ?
by lejeczek 27 Feb '22

27 Feb '22

Hi guys Would anybody know if RHEL & all involved gangs plan or think to have c9, when is GA, offer/support 3d virtio? many thanks, L.

1 0

networking question
by Natxo Asenjo 25 Feb '22

25 Feb '22

hi, I have an issue with one host at a customer's site. I think this cannot work, but I would like to ask you just in case I am confused. host: eno1: 172.20.10.x/24 management interface gw 172.20.10.254 bridge-service: 0.0.0.0/24 tun0: openvpn tunnel to external data center internal-bridge: x.x.x.x/28 ; routed subnet that goes to openvpn tun0 on vm: eth0: x.x.x.x/28 on internal-bridge (default gw) eth1: 172.20.10.x/24 bridge-service gw 172.20.10.254 (same as eno1) Connectivity to and from openvpn (from and to datacenter) is perfect. All vms are directly reachable from our management services, no natting. >From hypervisor I can ping the gw, from vm I cannot ping 172.20.10.254. My gut feeling is that this cannot work because traffic for the hypervisor for subnet 172.20.10.x/24 flows through eno1, but for vm through the bridge-loggin interface. So that cannot work. Should we just ask the customer to give us different subnets for the host and the vm? TIA. -- regards, Natxo

3 2

domblkinfo->allocation is not equals to domstats.1->allocation for disk with <slices> settings
by Zhen Tang 24 Feb '22

24 Feb '22

Hi, I did some testing about disk with <slice> setting and found that the value of domblkinfo->allocation is not same with domstats.1->allocation for disk with <slices> Env: libvirt-8.0.0-4.el9 qemu-kvm-6.2.0-9.el9 Step: 1. prepare a image # qemu-img create /car/lib/libvirt/images/disk-raw -f raw 100M -o preallocation=full 2. start a guest and attach the disk ➜ ~ cat disk.xml <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none' io='native' copy_on_read='off' discard='ignore' detect_zeroes='on'/> <source file='/var/lib/libvirt/images/disk-raw' index='1'> <slices> <slice type='storage' offset='0' size='104857600'/> </slices> </source> <backingStore/> <target dev='sdb' bus='scsi'/> <iotune> <total_bytes_sec>10000000</total_bytes_sec> <group_name>slice</group_name> </iotune> <alias name='ua-slices'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> 3. Write some data to the slices disk in vm (in vm) dd if=/dev/zero of=/dev/sdb bs=10M count=1 4. check *domblkinfo* and *domstats* ➜ ~ virsh domstats rhel9.0-1 --block|grep -Ei 'block.1.(allocation|capacity|physical)' *block.1.allocation=0* block.1.capacity=104857600 block.1.physical=104865792 ➜ ~ ➜ ~ virsh domblkinfo rhel9.0-1 sdb|grep -Ei '(allocation|capacity|physical)' Capacity: 104857600 *Allocation: 104865792* Physical: 104857600 Are these 'allocation' values expected to be equal to each other? Thanks, Zhen Tang

1 0

Re: Hugepages -- "Memory backend 'pc.ram' not found"
by Michal Prívozník 23 Feb '22

23 Feb '22

On 2/21/22 17:12, Charles Polisher wrote: Hey, please the list on CC for benefit of others, e.g. when somebody runs into the same problem they can find the discussion in the archive. > On 2/21/22 01:54, Michal Prívozník wrote: > >> On 2/20/22 04:07, Charles Polisher wrote: >>> Hello, >>> >>> After defining hugepages, as documented at >>> https://libvirt.org/formatdomain.html#memory-backing , >>> when I start the guest, I get a dialogue >>> box that says: >>> >>> Error starting domain: internal error: qemu unexpectedly >>> closed the monitor: 2022-02-20T01:10:36.520955Z >>> qemu-system-x86_64: Memory backend 'pc.ram' not found >>> Traceback (most recent call last): >>> File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, >>> in cb_wrapper >>> callback(asyncjob, *args, **kwargs) >>> File "/usr/share/virt-manager/virtManager/asyncjob.py", line 101, >>> in tmpcb >>> callback(*args, **kwargs) >>> File >>> "/usr/share/virt-manager/virtManager/object/libvirtobject.py", line 57, >>> in newfn >>> ret = fn(self, *args, **kwargs) >>> File "/usr/share/virt-manager/virtManager/object/domain.py", line >>> 1329, in startup >>> self._backend.create() >>> File "/usr/lib64/python3.9/site-packages/libvirt.py", line 1353, >>> in create >>> raise libvirtError('virDomainCreate() failed' >>> >>> After backing out changes, guest starts normally. >>> I searched online for the error message, but found nothing useful. >>> The hypervisor is running libvirtd (libvirt) 7.8.0 and QEMU emulator >>> version 6.1.0, >>> both build from source. I've got plenty of hugepages available. >>> The domain's XML definition is attached. >> Hey, can you share your domain XML and the generated cmd line? The >> latter should be found in /var/log/libvirt/qemu/$domain.log >> >> Thanks, >> Michal > > Thanks for your reply. As requested, the domain XML: > > <domain type="kvm"> > <name>slacky-0</name> > <uuid>4a67eb39-9b92-8b8a-97ba-7e1250d56b07</uuid> > <title>slacky-0</title> > <description>elided</description> > <memory unit="KiB">4194304</memory> > <currentMemory unit="KiB">4194304</currentMemory> > <memoryBacking> > <hugepages> > <page size="4194304" unit="KiB"/> This does not look correct. This is on x86_64 and there is no such size for hugepages, only 2MiB and 1GiB. > </hugepages> > </memoryBacking> > <vcpu placement="static">2</vcpu> > <os> > <type arch="x86_64" machine="pc-i440fx-5.1">hvm</type> > <bootmenu enable="no"/> > </os> > <features> > <acpi/> > <apic/> > <pae/> > </features> > <cpu mode="custom" match="exact" check="none"> > <model fallback="forbid">kvm64</model> > </cpu> > <clock offset="utc"/> > <on_poweroff>destroy</on_poweroff> > <on_reboot>restart</on_reboot> > <on_crash>restart</on_crash> > <devices> > <emulator>/usr/bin/qemu-system-x86_64</emulator> > <disk type="file" device="cdrom"> > <driver name="qemu" type="raw"/> > <target dev="hdc" bus="ide"/> > <readonly/> > <address type="drive" controller="0" bus="1" target="0" > unit="0"/> > </disk> > <disk type="file" device="disk"> > <driver name="qemu" type="qcow2" cache="writethrough"/> > <source file="/mnt/nvme1/VIRTUAL_MACHINES/slacky-0.qcow2"/> > <target dev="vda" bus="virtio"/> > <boot order="1"/> > <address type="pci" domain="0x0000" bus="0x00" slot="0x09" > function="0x0"/> > </disk> > <controller type="usb" index="0" model="ich9-ehci1"> > <address type="pci" domain="0x0000" bus="0x00" slot="0x05" > function="0x7"/> > </controller> > <controller type="usb" index="0" model="ich9-uhci1"> > <master startport="0"/> > <address type="pci" domain="0x0000" bus="0x00" slot="0x05" > function="0x0" multifunction="on"/> > </controller> > <controller type="usb" index="0" model="ich9-uhci2"> > <master startport="2"/> > <address type="pci" domain="0x0000" bus="0x00" slot="0x05" > function="0x1"/> > </controller> > <controller type="usb" index="0" model="ich9-uhci3"> > <master startport="4"/> > <address type="pci" domain="0x0000" bus="0x00" slot="0x05" > function="0x2"/> > </controller> > <controller type="ide" index="0"> > <address type="pci" domain="0x0000" bus="0x00" slot="0x01" > function="0x1"/> > </controller> > <controller type="virtio-serial" index="0"> > <address type="pci" domain="0x0000" bus="0x00" slot="0x07" > function="0x0"/> > </controller> > <controller type="scsi" index="0" model="virtio-scsi"> > <address type="pci" domain="0x0000" bus="0x00" slot="0x08" > function="0x0"/> > </controller> > <controller type="pci" index="0" model="pci-root"/> > <interface type="network"> > <mac address="52:54:00:c3:93:40"/> > <source network="default"/> > <model type="virtio"/> > <address type="pci" domain="0x0000" bus="0x00" slot="0x03" > function="0x0"/> > </interface> > <serial type="file"> > <source path="/tmp/myconsoleoutput.txt"/> > <target type="isa-serial" port="0"> > <model name="isa-serial"/> > </target> > </serial> > <console type="file"> > <source path="/tmp/myconsoleoutput.txt"/> > <target type="serial" port="0"/> > </console> > <input type="tablet" bus="usb"> > <address type="usb" bus="0" port="1"/> > </input> > <input type="mouse" bus="ps2"/> > <input type="keyboard" bus="ps2"/> > <graphics type="spice" autoport="yes" listen="127.0.0.1"> > <listen type="address" address="127.0.0.1"/> > </graphics> > <sound model="ich9"> > <address type="pci" domain="0x0000" bus="0x00" slot="0x04" > function="0x0"/> > </sound> > <audio id="1" type="spice"/> > <video> > <model type="qxl" ram="65536" vram="65536" vgamem="16384" > heads="1" primary="yes"/> > <address type="pci" domain="0x0000" bus="0x00" slot="0x02" > function="0x0"/> > </video> > <memballoon model="virtio"> > <address type="pci" domain="0x0000" bus="0x00" slot="0x06" > function="0x0"/> > </memballoon> > </devices> > </domain> > > > And the guest log with the generated command line: > > 2022-02-20 01:13:12.985+0000: starting up libvirt version: 7.8.0, > qemu version: 6.1.0, kernel: 5.15.19, hostname: godzilla.peecee3.com > LC_ALL=C \ > PATH=/sbin:/usr/sbin:/bin:/usr/bin \ > HOME=/var/lib/libvirt/qemu/domain-34-slacky-0 \ > XDG_DATA_HOME=/var/lib/libvirt/qemu/domain-34-slacky-0/.local/share \ > XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain-34-slacky-0/.cache \ > XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain-34-slacky-0/.config \ > /usr/bin/qemu-system-x86_64 \ > -name guest=slacky-0,process=qemu:slacky-0,debug-threads=on \ > -S \ > -object > '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-34-slacky-0/master-key.aes"}' > \ > -machine > pc-i440fx-5.1,accel=kvm,usb=off,dump-guest-core=off,memory-backend=pc.ram \ So this instructs qemu to use a memory device wih id='pc.ram' as the default/generic memory for the guest.. > -cpu kvm64 \ > -m 4096 \ > -overcommit mem-lock=off \ .. but we never generate such device. Here libvirt should have generated -object memory-backend-file,id=pc.ram,path=/hugepages/... And I think I know why. Let me post a patch. > -smp 2,sockets=2,cores=1,threads=1 \ > -uuid 4a67eb39-9b92-8b8a-97ba-7e1250d56b07 \ > -no-user-config \ > -nodefaults \ > -chardev socket,id=charmonitor,fd=34,server=on,wait=off \ > -mon chardev=charmonitor,id=monitor,mode=control \ > -rtc base=utc \ > -no-shutdown \ > -boot menu=off,strict=on \ > -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x5.0x7 \ > -device > ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x5 > \ > -device > ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x5.0x1 \ > -device > ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x5.0x2 \ > -device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x8 \ > -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 \ > -device ide-cd,bus=ide.1,unit=0,id=ide0-1-0 \ > -blockdev > '{"driver":"file","filename":"/mnt/nvme1/VIRTUAL_MACHINES/slacky-0.qcow2","node-name":"libvirt-1-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' > \ > -blockdev > '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage","backing":null}' > \ > -device > virtio-blk-pci,bus=pci.0,addr=0x9,drive=libvirt-1-format,id=virtio-disk0,bootindex=1,write-cache=off > \ > -netdev tap,fd=58,id=hostnet0,vhost=on,vhostfd=60 \ > -device > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:c3:93:40,bus=pci.0,addr=0x3 > \ > -add-fd set=3,fd=62 \ > -chardev file,id=charserial0,path=/dev/fdset/3,append=on \ > -device isa-serial,chardev=charserial0,id=serial0 \ > -device usb-tablet,id=input0,bus=usb.0,port=1 \ > -audiodev id=audio1,driver=spice \ > -spice > port=5901,addr=127.0.0.1,disable-ticketing=on,seamless-migration=on \ > -device > qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,max_outputs=1,bus=pci.0,addr=0x2 > \ > -device ich9-intel-hda,id=sound0,bus=pci.0,addr=0x4 \ > -device > hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0,audiodev=audio1 \ > -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \ > -msg timestamp=on > 2022-02-20T01:13:13.136602Z qemu-system-x86_64: Memory backend > 'pc.ram' not found > 2022-02-20 01:13:13.186+0000: shutting down, reason=failed > > Again, thank you! Michal

2 2

help
by admin＠foundryserver.com 22 Feb '22

22 Feb '22

help

1 0

random but often VMs' - BUG: soft lockup
by lejeczek 22 Feb '22

22 Feb '22

Hi guys I see this often(perhaps once a day) on VMs: ... watchdog: BUG: soft -lockup - CPU#1 stuck for xxXXxxs! [swapper/1:0] At the moment I cannot say I see a pattern - perhaps not spotted one yet - and this can happen to any VM between any one of the three hosts, which hosts are CentOS 9 on AMD Ryzen 5600G hardware. VMs are mostly CentOS 8 but a few Ubuntus too. Anybody would know what that might be, is, a symptom of? But most importantly how to dig in to troubleshoot this?(when this happen then such affected VM I can only hard reset) many thanks, L.

2 1

Hugepages -- "Memory backend 'pc.ram' not found"
by Charles Polisher 21 Feb '22

21 Feb '22

Hello, After defining hugepages, as documented at https://libvirt.org/formatdomain.html#memory-backing , when I start the guest, I get a dialogue box that says: Error starting domain: internal error: qemu unexpectedly closed the monitor: 2022-02-20T01:10:36.520955Z qemu-system-x86_64: Memory backend 'pc.ram' not found Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/asyncjob.py", line 101, in tmpcb callback(*args, **kwargs) File "/usr/share/virt-manager/virtManager/object/libvirtobject.py", line 57, in newfn ret = fn(self, *args, **kwargs) File "/usr/share/virt-manager/virtManager/object/domain.py", line 1329, in startup self._backend.create() File "/usr/lib64/python3.9/site-packages/libvirt.py", line 1353, in create raise libvirtError('virDomainCreate() failed' After backing out changes, guest starts normally. I searched online for the error message, but found nothing useful. The hypervisor is running libvirtd (libvirt) 7.8.0 and QEMU emulator version 6.1.0, both build from source. I've got plenty of hugepages available. The domain's XML definition is attached. Any ideas where to look next? Thanks, -- Charles Polisher

2 1

libvirt-python for alpine linux
by Tom Ammon 20 Feb '22

20 Feb '22

Hi everybody, Is there a libvirt-python package for alpine linux? I'm looking to containerize an app that uses libvirt-python, using alpine linux, but all I found that looked similar to libvirt-python was py-libvirt ( https://pkgs.alpinelinux.org/package/v3.3/main/x86/py-libvirt) and it looks pretty old. Tom -- ----------------------------------------------------------------------------- Tom Ammon M: (737) 400-9042 thomasammon(a)gmail.com -----------------------------------------------------------------------------

2 2