- Users - libvirt List Archives

[libvirt-users] Trouble running LXC through libvirt
by Shashank Sahni 29 May '13

29 May '13

Hi everyone, I followed the instructions here to create ubuntu lxc containers. https://help.ubuntu.com/12.04/serverguide/lxc.html#lxc-admin I then copied the rootfs to /var/lib/libvirt/images/precise and booted it as an "operating system container" through virt-manager. Here are the incidents. - It immediately showed on console "init: unable to create /dev/kmsg" but after a while it booted. - I had modified the image to allow static password for user ubuntu and I logged in. But to my surprise I wasn't able to use sudo. The error was "sudo: setuid is not set" I've tried this image on lxc and it works like a charm. But there seems to be some issue with libvirt. Some help would be greatly appreciated. -- Shashank Sahni

1 0

[libvirt-users] Help needed regarding "virsh cpu-stats test_vm"
by Anusha Rayani 29 May '13

29 May '13

Hi, We are implementing feature called CPU separation in the platform. So, guest VMs will have dedicated cores allocated using cgroups (cgroups hierachy related VMs managed by libvirt). virsh cpu-stats command is not working in our platform : virsh # cpu-stats test_vm error: Failed to virDomainGetCPUStats() error: Requested operation is not valid: cgroup CPUACCT controller is not mounted It should show info like this. $ virsh cpu-stats test_vm CPU0: cpu_time 0.025812184 seconds vcpu_time 0.025812184 seconds CPU1: cpu_time 4.893484927 seconds vcpu_time 4.893484927 seconds Total: cpu_time 4.924620941 seconds user_time 1.060000000 seconds system_time 3.050000000 seconds We are suspecting some issue in virsh when it is trying to find to where that cgroups is mounted in a system (default in ubuntu is /sys/fs/cgroup/cpuset/libvirt/, but in our platform uses /dev/cgroup_xxx). Find /proc/cgroups and /proc/mounts log below: ================================== # cat /proc/cgroups #subsys_name hierarchy num_cgroups enabled cpuset 0 1 1 ns 0 1 1 cpu 1 3 1 cpuacct 0 1 1 memory 2 1 1 freezer 0 1 1 net_cls 0 1 1 blkio 0 1 1 # cat /proc/mounts cpu /dev/cgroup_cpu cgroup rw,relatime,cpu 0 0 memory /dev/cgroup_mem cgroup rw,relatime,memory 0 0 Can you please help us in this regard to enable this command in our platform, Thanks in advance !!! Regards, Anusha

1 0

[libvirt-users] Usual number of guests on a host
by Parakkal, Navin S 28 May '13

28 May '13

Hi, Can someone tell us what is the usual number of guests on a typical host in a production environment ? Has someone tested this ? What number does it scale to ? We have around 150 per host running fine. Regards, Navin

3 2

[libvirt-users] libvirt for Citrix XenServer
by Parakkal, Navin S 28 May '13

28 May '13

Hi, Can someone send me the build steps how to build for Citrix XenServer ? I want to build a version of libvirt for Citrix XenServer. Regards, Navin

2 3

Re: [libvirt-users] libvirt for Citrix XenServer
by Parakkal, Navin S 28 May '13

28 May '13

________________________________ From: Prasad [prasad(a)mukhedkar.com] Sent: Tuesday, May 28, 2013 7:33 PM To: Parakkal, Navin S Subject: Re: [libvirt-users] libvirt for Citrix XenServer On 05/27/2013 12:13 PM, Parakkal, Navin S wrote: Hi, Can someone send me the build steps how to build for Citrix XenServer ? I want to build a version of libvirt for Citrix XenServer. Regards, Navin _______________________________________________ libvirt-users mailing list libvirt-users(a)redhat.com<mailto:libvirt-users@redhat.com> https://www.redhat.com/mailman/listinfo/libvirt-users Navin, I don't think libvirt supports Citrix XenServer hypervisors. per the libvirt.org only following hypervisors are supported : * The KVM/QEMU<http://libvirt.org/drvqemu.html> Linux hypervisor * The Xen<http://libvirt.org/drvxen.html> hypervisor on Linux and Solaris hosts. * The LXC<http://libvirt.org/drvlxc.html> Linux container system * The OpenVZ<http://libvirt.org/drvopenvz.html> Linux container system * The User Mode Linux<http://libvirt.org/drvuml.html> paravirtualized kernel * The VirtualBox<http://libvirt.org/drvvbox.html> hypervisor * The VMware ESX and GSX<http://libvirt.org/drvesx.html> hypervisors * The VMware Workstation and Player<http://libvirt.org/drvvmware.html> hypervisors * The Microsoft Hyper-V<http://libvirt.org/drvhyperv.html> hypervisor * The IBM PowerVM<http://libvirt.org/drvphyp.html> hypervisor * The Parallels<http://libvirt.org/drvparallels.html> hypervisor > I think that is out of the box . I found these steps but was thinking if there is any wiki or link. https://www.redhat.com/archives/libvirt-users/2011-June/msg00042.html http://stackoverflow.com/questions/7130665/install-libvirt-with-xenserver-a…

1 0

[libvirt-users] hangs in libvirt function virLogMessage
by Parakkal, Navin S 28 May '13

28 May '13

Hi, We are hitting a deadlock on libvirt on 0.9.4 version. Can someone help us ? 1) Is there any way to specify timeout for all the calls made by libvirt especially virConnectOpenReadOnly 2) Does virCommandRunAsync always fork a new process ? gdb) bt #0 0x00007fc17b53ce6e in __lll_lock_wait_private () from /lib64/libc.so.6 #1 0x00007fc17b4e3f2d in _L_lock_2164 () from /lib64/libc.so.6 #2 0x00007fc17b4e3ce7 in __tz_convert () from /lib64/libc.so.6 #3 0x00007fc16e4bfdab in virLogMessage () from /usr/lib64/libvirt.so.0 #4 0x00007fc16e4b092e in ?? () from /usr/lib64/libvirt.so.0 #5 0x00007fc16e4b2836 in ?? () from /usr/lib64/libvirt.so.0 #6 0x00007fc16e4b318c in virCommandRunAsync () from /usr/lib64/libvirt.so.0 #7 0x00007fc16e570705 in ?? () from /usr/lib64/libvirt.so.0 #8 0x00007fc16e56a1f8 in ?? () from /usr/lib64/libvirt.so.0 #9 0x00007fc16e55c3d2 in ?? () from /usr/lib64/libvirt.so.0 #10 0x00007fc16e55db10 in ?? () from /usr/lib64/libvirt.so.0 #11 0x00007fc16e52ed95 in ?? () from /usr/lib64/libvirt.so.0 #12 0x00007fc16e52f957 in virConnectOpenReadOnly () from /usr/lib64/libvirt.so.0 #13 0x00007fc153cdb858 in OalibvirtCollectionManager::libvirtColJobImpl::Run (this=0x7fc13182a610) at ../libvirtColJobImpl.cpp:348 #14 0x00007fc153cd6e83 in OalibvirtCollectionManager::libvirtColJob::Run (this=<value optimized out>) at ../libvirtColJob.cpp:36 #15 0x00007fc17cc8ee36 in OAScheduler::ScheduleWorker::Run (this=0x7fc15dd9ede0, myThread=<value optimized out>) at /svn-share2/BLR.ovpa.11.12.i/linx64/hpsw-oa/AgentFramework/cpp/src/Scheduler/ScheduleWorker.cpp:32 #16 0x00007fc17c04a418 in OvXplThread::ThreadInfo_t::Run() () from /opt/OV/lib64/libOvXpl.so #17 0x00007fc17c04a6a5 in runThread () from /opt/OV/lib64/libOvXpl.so #18 0x00007fc17b22f7f1 in start_thread () from /lib64/libpthread.so.0 [root@martellvm6 ~]# virsh version Compiled against library: libvir 0.9.4 Using library: libvir 0.9.4 Using API: QEMU 0.9.4 error: failed to get the hypervisor version error: internal error Cannot find suitable emulator for x86_64 [root@martellvm6 ~]# cat /etc/issue CentOS release 6.2 (Final) Kernel \r on an \m

3 4

[libvirt-users] Help: Using Pre-created tap interfaces with Libvirt+Xen
by Raghu Nallamothu 25 May '13

25 May '13

Hi All., I am not sure if this is possible in xen via Libvirt, but what I am trying to do is, I want libvirt to launch a VM and attach a pre-created tap interface to that VM ( I do not want XEN to create one, as I am running a lot of custom scripts on my tap interface). I also dont want xen to attach this tap interface to a bridge. For example, lets say I have created a tap interface with name "tap123456" when libvirt launches my VM in xen, I want the VM to read its networking info from this tap interface. But I wasn't so successful in doing this when ever I am trying to do this, I am seeing the following error message "VmError: Device 0 (vif) could not be connected. Hotplug scripts not working." and "error: POST operation failed: xend_post: error from xen daemon: (xend.err 'Device 0 (vif) could not be connected. Cannot rename interface vif4.0. An interface with name tap12345 already exists.')". But I dont want xen to create another interface and rename it, rather want xen to use the existing one === output of lsmod === bash-4.1# lsmod | grep xen xen_acpi_processor 4465 0 xen_netback 25455 0 [permanent] xen_gntdev 9504 2 xen_evtchn 4899 3 xenfs 2943 1 xen_privcmd 4972 19 xenfs ==== end of output ==== My Configuration : Centos 6.2 with Xen 4.2.5 along with Libvirt Libvirt Configuration file, <domain type='xen'> <name>raghu_12345</name> <uuid>12113325-d948-4a1b-b673-888a16b90726</uuid> <memory>1048576</memory> <vcpu>1</vcpu> <os> <type>hvm</type> <loader>/usr/lib/xen/boot/hvmloader</loader> <boot dev='hd'/> </os> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <features> <pae/> <acpi/> <apic/> </features> <devices> <emulator>/usr/lib/xen/bin/qemu-dm</emulator> <interface type="ethernet"> <mac address='00:25:90:3f:25:91'/>  <target dev='tap123456'/> </interface> <disk type='file' device='disk'> <source file='~/tmp/lucid.img'/> <target dev='hda'/> </disk> <console type='pty'> <target port='0'/> </console> <graphics port='-1' type='vnc' autoport='yes' listen='0.0.0.0'/> </devices> </domain> I have a pre-created tap interface with name 'tap123456' with all the networking setup with dhcp and dns running. Thanks for your time and help. Regards Raghu

1 0

[libvirt-users] hardware error 0x80000021 on Ubuntu 12.10, need advice
by Sebastien Douche 23 May '13

23 May '13

Hi, On a DELL r610 (Intel Xeon L5520) and a Windows guest I have an hardware error. The bug is well known[1][2] and seems fixed with the package 3.5.0-16-generic. But I use 3.5.0-30-generic. Do I need to upgrade to 13.10? Or just the kernel ? Or modify the options of the kvm module? Thanks. [1] https://bugzilla.redhat.com/show_bug.cgi?id=854983 [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1045027 logs: 2013-05-23 15:54:02.306+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm-spice -name windows1 -S -M pc-1.2 -enable-kvm -m 3500 -smp 2,sockets=2,cores=1,threads=1 -uuid d170225e-7367-4ece-4338-6b1811c10c0c -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/windows1.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/srv/kvm/windows1.img,if=none,id=drive-ide0-0-0,format=qcow2 -device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -drive file=/srv/iso/windows7ultimate.iso,if=none,id=drive-ide0-1-0,readonly=on,format=raw -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=18,id=hostnet0,vhost=on,vhostfd=19 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:49:32:cc,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -device usb-tablet,id=input0 -vnc 127.0.0.1:0 -vga std -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/1 KVM: entry failed, hardware error 0x80000021 If you're running a guest on an Intel machine without unrestricted mode support, the failure can be most likely due to the guest entering an invalid state for Intel VT. For example, the guest maybe running in big real mode which is not supported on less recent Intel processors. EAX=00000010 EBX=00000080 ECX=00000000 EDX=00000080 ESI=0025da4a EDI=0007da4a EBP=00001f20 ESP=00000200 EIP=0000009b EFL=00000002 [-------] CPL=3 II=0 A20=1 SMM=0 HLT=0 ES =0020 00000200 0000ffff 00009300 CS =b000 002b0000 0000ffff 0000f300 SS =0020 00000200 0000ffff 0000f300 DS =0020 00000200 0000ffff 00009300 FS =0020 00000200 0000ffff 00009300 GS =0020 00000200 0000ffff 00009300 LDT=0000 00000000 0000ffff 00008200 TR =0000 00000000 0000ffff 00008b00 GDT= 002b0000 00000027 IDT= 00000000 000003ff CR0=00000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=02 00 00 ea 91 00 00 00 18 00 0f 20 c0 66 83 e0 fe 0f 22 c0 <66> 31 c0 8e d8 8e c0 8e d0 66 bc 00 04 00 00 8e e0 8e e8 ea 00 00 00 20 00 00 00 20 4a da -- Sebastien Douche <sdouche(a)gmail.com> Twitter: @sdouche / G+: +sdouche

1 0

[libvirt-users] cpu passthrough
by Thomas Manninger 23 May '13

23 May '13

1 0

[libvirt-users] snapshot create error, unable to find cgroup for vm
by Gao Yongwei 22 May '13

22 May '13

Hello: Yesterday I yum update libvirt from 0.9.10 to 0.10.2 ,after update I got some error in libvirtd.log like this: 2013-05-10 07:39:09.440+0000: 18824: warning : virCgroupMoveTask:885 : no vm cgroup in controller 3 2013-05-10 07:39:09.440+0000: 18824: warning : virCgroupMoveTask:885 : no vm cgroup in controller 4 2013-05-10 07:39:09.440+0000: 18824: warning : virCgroupMoveTask:885 : no vm cgroup in controller 6 so,I restarted cgconfig and libvirtd daemon : service cgconfig restart ; service libvirtd restart after that ,I cannot create snapshot for vm anymore.and error log message below: 2013-05-16 01:13:23.638+0000: 28848: error : qemuDomainSnapshotCreateDiskActive:11299 : internal error Unable to find cgroup for vm1 my version info : # rpm -q libvirt libvirt-0.10.2-18.el6_4.4.x86_64 # rpm -q qemu-kvm qemu-kvm-0.12.1.2-2.295.el6_3.1.x86_64 in /cgroup dir I cannot find anything about vm1.how can I recover the missing cgroup for vm ? thanks !

2 6