- Users - libvirt List Archives

[libvirt-users] Issue with macvtap bridge and forwarding
by Matt LaPlante 09 Apr '13

09 Apr '13

I have three hosts running Ubuntu 12.04 (libvirt 0.9.8). The configuration is one host running on bare metal while the other two are KVM guests. The first guest is my network router. It has a direct connection to a physical nic going out to the internet, and a bridged connection to a nic for the lan. The host has ip forwarding enabled and forwards my lan traffic back and forth to the internet. The second host is a "lan" machine, which is also on the bridged lan nic. There are several other physical hosts also on the switched lan network this nic connects to. Both hosts are configured on the lan tap as follows (different mac): <interface type='direct'> <mac address='13:54:21:1f:f3:42'/> <source dev='eth1' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Everything on the firewall host seems to work OK. Hosts elsewhere on the LAN can connect to it, and they have no problem routing through it and out to the internet and back. That is, traffic passes through both nics and this host successfully. The other guest can also be reached successfully from machines on the LAN. I can ping it and I can ssh to it. I also note that it seems to be able to be able to talk to the "router" host over the vtap bridge: it can perform dns lookups against the router host, and they can seem to reach each other's ports. Where I'm getting stuck is that for whatever reason, the second guest apparently cannot reach the internet via my router host. It's the only host anywhere on the lan that apparently can't pass forwarding traffic via the router guest, and the only common feature appears to be the macvtap bridge. This issue *does not* happen when using a common linux bridge in the otherwise same configuration and the same hosts. In the linux bridge scenario, the lan guest forwards traffic via the router guest fine. But when switching to the macvtap configuration, suddenly the lan guest no longer forwards traffic via the router guest and out to the internet. What appears to be happening is that the traffic is crossing the bridge, but the router host does not classify it or masq it properly, and it never makes the internet trip as expected. Further extending my suspicions, initiating an outbound http connection does not raise an entry in the conntrack table on the router for the problem host. So my question is, what is it about macvtap bridge that would cause traffic coming over via the tap bridge to be routed differently than traffic coming *up* the bridge from the physical interface, or via a traditional linux bridge?

2 3

[libvirt-users] How to device port on the controller
by Daniele Testa 09 Apr '13

09 Apr '13

Hi, I am adding a disk to my KVM virtual server, but for some reason it refuses to honor the <address> I have tried the following 3: <disk type='block' device='disk'> <driver name='phy' type='raw'/> <source dev='/dev/nbd2'/> <target dev='vdb' bus='virtio'/> <serial>my-fake-serial</serial> <address type='drive' controller='0' bus='1' target='3' unit='2'/> </disk> <disk type='block' device='disk'> <driver name='phy' type='raw'/> <source dev='/dev/nbd2'/> <target dev='vdb' bus='virtio'/> <serial>my-fake-serial</serial> <address type='pci' bus='0x00' slot='0x08' function='0x0'/> </disk> <disk type='block' device='disk'> <driver name='phy' type='raw'/> <source dev='/dev/nbd2'/> <target dev='vdb' bus='virtio'/> <serial>my-fake-serial</serial> <address type='virtio-serial' controller='0' bus='0' port='8'/> </disk> I would assume the last one is the one to use, as I am using a "virtio" bus. However, the <address> attribute is simply ignored and the disk is always attached as this: pci-0000:00:05.0 Further, how do I read the "my-fake-serial" from within the virtual machine? I have tried using this: udevadm info -a -p $(udevadm info -q path -n /dev/vdb) But it does not show the serial string there anywhere. Regards, Daniele

2 3

[libvirt-users] fail to convert qemu xml to args with libvirt-1.0.4: An error occurred, but the cause is unknown
by Yin Olivia-R63875 09 Apr '13

09 Apr '13

Hi, I used to convert qemu XML to args with libvirt-1.0.3. But it failed to convert with libvirt-1.0.4. # virsh domxml-to-native qemu-argv test.xml >test.sh error: An error occurred, but the cause is unknown Comparing the debug file as below: 1) lbvirt-1.0.3 <cut> 2013-04-09 03:23:47.296+0000: 2669: debug : virEventPollInterruptLocked:716 : Interrupting 2013-04-09 03:23:47.296+0000: 2669: debug : virNetClientIO:1807 : All done with our call head=(nil) call=0x100871c0 rv=0 2013-04-09 03:23:47.297+0000: 2670: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-04-09 03:23:47.297+0000: 2670: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-04-09 03:23:47.297+0000: 2669: debug : virNetMessageFree:73 : msg=0x10087500 nfds=0 cb=(nil) 2013-04-09 03:23:47.297+0000: 2670: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-04-09 03:23:47.297+0000: 2670: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-04-09 03:23:47.297+0000: 2669: debug : virConnectClose:1483 : conn=0x100878b8 <cut> 2) libvirt-1.0.4 <cut> 2013-04-09 03:07:58.012+0000: 2834: debug : virEventPollInterruptLocked:716 : Interrupting 2013-04-09 03:07:58.012+0000: 2834: debug : virNetClientIO:1810 : All done with our call head=(nil) call=0x10089db8 rv=0 2013-04-09 03:07:58.012+0000: 2835: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-04-09 03:07:58.012+0000: 2835: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-04-09 03:07:58.012+0000: 2834: error : virNetClientProgramDispatchError:175 : An error occurred, but the cause is unknown 2013-04-09 03:07:58.012+0000: 2835: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-04-09 03:07:58.012+0000: 2834: debug : virNetMessageFree:73 : msg=0x1008a0f8 nfds=0 cb=(nil) 2013-04-09 03:07:58.012+0000: 2835: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-04-09 03:07:58.012+0000: 2835: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-04-09 03:07:58.012+0000: 2835: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-04-09 03:07:58.013+0000: 2835: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-04-09 03:07:58.013+0000: 2835: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-04-09 03:07:58.013+0000: 2834: debug : virConnectClose:1483 : conn=0x1008a4b0 <cut> How can I debug this cause unknown error? Best Regards, Olivia

1 0

[libvirt-users] remote connection issue 'virsh -c qemu+ssh:///root@localhost/system list'
by Yin Olivia-R63875 09 Apr '13

09 Apr '13

Hi, I'm trying remote connection with qemu hypervisor on FSL PPC board. The libvirt server is the PPC board. root@ppc:~# ifconfig eth0 10.193.20.109 root@ppc:~# libvirtd -d root@ppc:~# virsh -c qemu:///system define test.xml root@ppc:~# virsh -c qemu:///system start test root@ppc:~# virsh -c qemu:///system list --all Id Name State ---------------------------------------------------- 2 test running Connect from an X86 PC (Ubuntu 10.04) to the PPC board. user@x86:~$ virsh -c qemu+ssh://root@10.193.20.109/system list --all The authenticity of host '10.193.20.109 (10.193.20.109)' can't be established. RSA key fingerprint is 2f:56:07:08:da:7d:ac:41:45:57:d2:12:15:19:67:e0. Are you sure you want to continue connecting (yes/no)? yes root(a)10.193.20.109's password: error: failed to connect to the hypervisor error: End of file while reading data: Warning: Permanently added '10.193.20.109' (RSA) to the list of known hosts. nc: invalid option -- 'U' BusyBox v1.19.4 (2013-03-08 13:08:18 CST) multi-call binary. Usage: nc [-iN] [-wN] [-l] [-p PORT] [-f FILE|IPADDR PORT] [-e PROG]: Input/output error I tried to verify the remote connection on localhost. But it also failed as below: root@mpc8572ds:~# virsh -c qemu+ssh:///root@localhost/system list --all root@localhost's password: error: failed to connect to the hypervisor error: End of file while reading data: nc: invalid option -- 'U' BusyBox v1.19.4 (2013-03-08 13:08:18 CST) multi-call binary. Usage: nc [-iN] [-wN] [-l] [-p PORT] [-f FILE|IPADDR PORT] [-e PROG]: Input/output error Could anyone give suggestion on this issue? Best Regards, Olivia

2 3

[libvirt-users] libvirt, selinux, moving images to ~/images does not work
by Alexey Kardashevskiy 09 Apr '13

09 Apr '13

Hi! I am trying libvirt on POWERPC64 with the default settings such as selinux enabled. It is all good till I move images out of /var/lib/libvirt/images/. http://libvirt.org/drvqemu.html#securityselinux is saying that "If attempting to use disk images in another location, the user/administrator must ensure the directory has be given this requisite label. Likewise physical block devices must be labelled system_u:object_r:virt_image_t.". So did I: [root@vpl2 ~]# ls -dlZ /home/aik/virtimg /var/lib/libvirt/images drwxr-xr-x. root root system_u:object_r:virt_image_t:s0 /home/aik/virtimg drwxr-xr-x. root root system_u:object_r:virt_image_t:s0 /var/lib/libvirt/images [root@vpl2 ~]# ls -lZ /home/aik/virtimg /var/lib/libvirt/images /home/aik/virtimg: -rwxrwxrwx. root root system_u:object_r:virt_content_t:s0 Fedora-18-ppc64-DVD.iso /var/lib/libvirt/images: -rwxrwxrwx. root root system_u:object_r:virt_image_t:s0 fc18guest However "virsh -c qemu:///system create libvirtguest-aik.xml" failes with "avc: denied { dac_override }" and "avc: denied { dac_read_search }". Also, there is "user system_u is not defined" in /var/log/messages what is confusing as "semanage user -l" says it is there. If I simply move Fedora-18-ppc64-DVD.iso to /var/lib/libvirt/images, the problem goes away and everything works fine. I am running custom build 3.8 kernel and libvirt from git ("eebbb23 qemu: support URI syntax for NBD"). More detailed output is below, this is all from the host system. What do I miss? Thank you. [root@vpl2 ~]# tail /var/log/messages Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.sepol_context_to_sid: could not convert system_u:system_r:svirt_t:s0:c263,c837 to sid Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.context_from_record: user system_u is not defined Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.context_from_record: could not create context structure Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.context_from_string: could not create context structure Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.sepol_context_to_sid: could not convert system_u:system_r:svirt_t:s0:c263,c837 to sid Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.context_from_record: user system_u is not defined Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.context_from_record: could not create context structure Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.context_from_string: could not create context structure Apr 8 16:47:48 vpl2 dbus-daemon[2903]: libsepol.sepol_context_to_sid: could not convert system_u:system_r:svirt_t:s0:c263,c837 to sid Apr 8 16:47:48 vpl2 libvirtd[5041]: failed to connect to monitor socket: No such process [root@vpl2 ~]# semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user s0 s0 git_shell_r guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r xguest_u user s0 s0 xguest_r [root@vpl2 ~]# tail /var/log/audit/audit.log type=NETFILTER_CFG msg=audit(1365403596.177:4507): table=nat family=2 entries=60 type=NETFILTER_CFG msg=audit(1365403596.177:4508): table=nat family=2 entries=61 type=AVC msg=audit(1365403606.017:4509): avc: denied { dac_override } for pid=8944 comm="qemu-system-ppc" capability=1 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4510): avc: denied { dac_read_search } for pid=8944 comm="qemu-system-ppc" capability=2 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4511): avc: denied { dac_override } for pid=8944 comm="qemu-system-ppc" capability=1 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4512): avc: denied { dac_read_search } for pid=8944 comm="qemu-system-ppc" capability=2 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4513): avc: denied { dac_override } for pid=8944 comm="qemu-system-ppc" capability=1 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4514): avc: denied { dac_read_search } for pid=8944 comm="qemu-system-ppc" capability=2 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4515): avc: denied { dac_override } for pid=8944 comm="qemu-system-ppc" capability=1 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability type=AVC msg=audit(1365403606.017:4516): avc: denied { dac_read_search } for pid=8944 comm="qemu-system-ppc" capability=2 scontext=system_u:system_r:svirt_t:s0:c574,c809 tcontext=system_u:system_r:svirt_t:s0:c574,c809 tclass=capability [root@vpl2 ~]# libvirtd --version libvirtd (libvirt) 1.0.3 [root@vpl2 ~]# yum info policycoreutils [...] Arch : ppc64 Version : 2.1.13 Release : 59.fc18 Size : 3.8 M [root@vpl2 ~]# cat /etc/fedora-release Fedora release 18 (Spherical Cow) [root@vpl2 ~]# uname -a Linux vpl2.ozlabs.ibm.com 3.8.0-kvm-64k-aik+ #376 SMP Mon Apr 8 14:40:40 EST 2013 ppc64 ppc64 ppc64 GNU/Linux [aik@vpl2 ~]$ cat libvirtguest-aik.xml <domain type='kvm'> <name>AikLibvirtTest</name> <memory>2097152</memory> <vcpu>2</vcpu> <os> <type arch='ppc64' machine='pseries'>hvm</type> <boot dev='cdrom'/> <boot dev='hd'/> </os> <clock offset='utc'/> <devices> <emulator>/usr/local/bin/qemu-system-ppc64</emulator> <disk type='file' device='disk' > <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/fc18guest'/> <target dev='sda' bus='scsi'/> </disk> <disk type='file' device='cdrom' > <driver name='qemu' type='raw'/> <source file='/home/aik/virtimg/Fedora-18-ppc64-DVD.iso'/> <target dev='sdc' bus='scsi'/> <readonly/> </disk> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <memballoon model='virtio'/> </devices> </domain> -- Alexey

3 4

[libvirt-users] VNC Server in libvirt
by Jaime Loureiro Acuña 08 Apr '13

08 Apr '13

My name is Jaime Loureiro and I work in the Network & Applications area in University of Vigo. I am writing to you hoping you can help me with some libvirt graphics issues. I was analysing the source code of the libvirt in order to find how to access the display of each virtual machine. We are trying to generate a video streaming from the graphics content, though it is not easy to find what function is the most appropriate to do that. We tried to use the screenshot feature, but the rate is to low to generate a smooth streaming. I suposse the vnc server is reading the graphics output of each virtual machine at a low level, however I cannot find the exact point where the server is. Currently I am trying to understand the function "virDomainOpenGraphics" in libvirt.c and, at a lower level, the function "qemuProcessHandleGraphics" in qemu_process.c, but I 'm not sure if it is possible to get what we need from them. I would appreciate any help or clue you could provide regarding this issue. Thank you very much in advance. Best regards,

2 1

[libvirt-users] reset = destroy start
by 邓焕聪 08 Apr '13

08 Apr '13

what is different between destroy -> start and reset in virsh? i meet this position , when i reset a domain, it cannot start , it stoped at initialize initd.but when i destory it ,and start it , it can run normally. i am very confuse about them. who can tell me the difference.... thanks a lots.

2 1

[libvirt-users] 2 Problems with attaching/detaching disks with virsh and KVM
by Daniele Testa 07 Apr '13

07 Apr '13

Hi, I am having 2 issues with disks and KVM. ISSUE 1: I am unable to detach a disk from a running KVM. (root@h2)-(/tmp)# virsh dumpxml vps_99 <domain type='kvm' id='224'> <name>vps_99</name> <uuid>5e24e17c-f0e4-1030-ac57-0050560018a2</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>restart</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/nbd1'/> <target dev='vda' bus='virtio'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/nbd2'/> <target dev='vdb' bus='virtio'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/nbd3'/> <target dev='vde' bus='virtio'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/nbd4'/> <target dev='vdg' bus='virtio'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/nbd5'/> <target dev='vdi' bus='virtio'/> </disk> <interface type='bridge'> <mac address='00:50:56:00:1b:24'/> <source bridge='br0'/> <target dev='vnet3'/> <model type='virtio'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5999' autoport='no' keymap='en-us'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> <seclabel type='dynamic' model='apparmor'> <label>libvirt-5e24e17c-f0e4-1030-ac57-0050560018a2</label> <imagelabel>libvirt-5e24e17c-f0e4-1030-ac57-0050560018a2</imagelabel> </seclabel> </domain> (root@h2)-(/tmp)# cat disk.xml <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/nbd5'/> <target dev='vdi' bus='virtio'/> </disk> (root@h2)-(/tmp)# virsh detach-device vps_99 disk.xml error: Failed to detach device from disk.xml error: operation failed: disk vdi cannot be detached - no PCI address for device (root@h2)-(/tmp)# virsh detach-disk vps_99 vdi error: operation failed: disk vdi cannot be detached - no PCI address for device I have tried specifing a <address> for each disk, ie: address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> However, I still get the same "no PCI" error. I am able to add and remove NEW disks to the virtual server after it has been started, but I can't detach the disks that were defined when the KVM was created (even though it looks exactly the same in the XML-file). ISSUE 2: When I add a disk to a KVM running linux (ubuntu in this case), it totally ignores my "target dev". I.e if I specify this: <target dev='vdi' bus='virtio'/> The disk is still being detected as "vdc". Removing the disk and adding it again, gives it "vdd" etc. So it seems it is pretty much just increamenting the letter and totally ignore my config. I read in the documentation that the target defined is just a "hint" for the system and is not always honered, but sorry, I simply cannot accept that :) There must be a way to specify the device the disk should be connected to. Amazon Web Services seems to be able to do this just fine. It will be a pain to write automated scripts when new disks are just attached to random devices. Regards, Daniele

1 0

[libvirt-users] URL to install Ubuntu Server guest
by Javi Legido 05 Apr '13

05 Apr '13

Hi there. Can somebody please confirm if the url to install an Ubuntu Server is http://archive.ubuntu.com/ubuntu/dists/quantal/main/installer-amd64/ ? If not kindly provide the right one. I want to perform a net installation, rather than point to an .iso image. Regards. Javier

1 1

[libvirt-users] virt-manager slow to connect, hangs on new host dialog
by martin f krafft 03 Apr '13

03 Apr '13

Hello, I am using virt-manager 0.9.4 on a Debian unstable system (libvirt 0.9.12) to connect to a libvirtd via SSH running on a Debian testing system (also version 0.9.12), and I have a problem using virt-manager, which first takes ages to connect, then freezes. The SSH connection is top-quality, the hosts are next to each other and connected by Gigabit Ethernet. virsh connections work fine. Unfortunately, when I run virt-manager and connect to the host, the host's capabilities are fetched very quickly (according to virt-manager's debug output), but it then takes 20–30 seconds until the connection is established. Logging libvirtd with log_level=2 produces nothing useful. Hence I tried with log_level=1, which is mayhem. Attached is the log output from the moment I told virt-manager to connect until shortly after the connection has been established. Maybe someone can figure out what's going on? I cannot… The next problem is that when I then try to create a host, I am shown the dialog and can enter one or two characters into the name field, then the GUI completely freezes, and so does libvirtd on the other system (ctrl-c does not work anymore). I have also captured this part of the session in a second log file, which provides no clues for me. Does anyone else know what might be going on? Thanks, -- martin | http://madduck.net/ | http://two.sentenc.es/ "es ist immer etwas wahnsinn in der liebe. es ist aber auch immer etwas vernunft im wahnsinn." - friedrich nietzsche spamtraps: madduck.bogus(a)madduck.net

2 8