- Users - libvirt List Archives

[libvirt-users] Missing target dev for interface
by jeremy avnet 10 Jun '10

10 Jun '10

I have over 20 guests running on a particular host and the three longest running ones are missing the network device information in their XML description: <interface type='network'> <mac address='54:52:10::f2:c5'/> <source network='local'/> </interface> Compared to the others which have: <interface type='network'> <mac address='54:52:d1:32:0a:a1'/> <source network='local'/> <target dev='vnet13'/> </interface> This is problematic as I wanted to use domifstat on the domains. Using the packet counts shown via ifconfig on the host, I was able to determine what the vnet interface should be, but passing that to domifstat doesn't work: $ virsh domifstat maki221 vnet13 Connecting to uri: qemu:///system error: Failed to get interface stats guest19 vnet13 error: invalid argument in invalid path, 'vnet13' is not a known interface How did this happen? Is there a way I can get libvirt to know about the interfaces? And the guest OS's network connections work fine. Thanks! .:. jeremy

2 2

[libvirt-users] Multipath pools - practical for use?
by Justin Clift 09 Jun '10

09 Jun '10

Hi all, Writing up some Fedora documentation, and looking to figure out the best way of mapping multipath network(!) LUNs to pools in libvirt. ie Infiniband SRP LUNs, but would probably apply to Fibre Channel equally as well. There are two approaches I can think of easily: a) Large LUNs (ie TB+) that are mapped to a host server as disk, with each LUN being configured as an LVM pool. This lets the host slice the pool up into volumes with the libvirt volume creation commands. b) Pre-purposed LUNs mapped to a host server as disk, but passed through directly to their respective guests. ie Something like Oracle, with 3 SAN LUNs mapped to guest FOO for its database data In a non-libvirt world I'd look at configuring the LUNs on the host with persistent name using multipath, then present them appropriately to whatever needs them from there. However, libvirt has a pool type called "multipath". Looking at the docs online, it doesn't appear to be all that fully featured at this point. Seems more of a brief mention and footnote, so I'm wondering whether to use it or skip it for now in the Fedora docs. Anyone have thoughts/suggestions/etc? :) Regards and best wishes, Justin Clift -- Salasaga - Open Source eLearning IDE http://www.salasaga.org

2 1

[libvirt-users] about virDomainSave and virDomainRestore
by Camilo Aguilar 09 Jun '10

09 Jun '10

Hi there, There is some special reason to require a virConnectPtr param in virDomainRestore ? Regards, Camilo

1 1

[libvirt-users] unknown procedure: 159
by DevOs Virt 09 Jun '10

09 Jun '10

Hi, I started using libvirt few days back...while using virDomainMemoryStats API, got "unknown procedure: 159" runtime error code is ------------------------------------------------------------------------------------------------------------------------------------- virDomainMemoryStatPtr statPtr; statPtr = malloc(VIR_DOMAIN_MEMORY_STAT_NR* sizeof (virDomainMemoryStatStruct)); unsigned int flags=0; int Ret; Ret = virDomainMemoryStats(domPtr,statPtr, VIR_DOMAIN_MEMORY_STAT_NR,flags); ------------------------------------------------------------------------------------------------------------------------------------- Machine details: ------------------------------------------------------------------------------------------------------------------------------------ [root@wlng-ppcore-nd3 hellolibvirt]# uname -a Linux wlng-ppcore-nd3 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux [root@wlng-ppcore-nd3 hellolibvirt]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.5 (Tikanga) ------------------------------------------------------------------------------------------------------------------------------------ virsh details: [root@wlng-ppcore-nd3 hellolibvirt]# virsh version Compiled against library: libvir 0.8.1 Using library: libvir 0.8.1 Using API: QEMU 0.8.1 Running hypervisor: QEMU 0.9.1 ------------------------------------------------------------------------------------------------------------------------------------ There are two libvirtd installations here.. ------------------------------------------------------------------------------------------------------------------------------------ [root@wlng-ppcore-nd3 sbin]# pwd /usr/sbin [root@wlng-ppcore-nd3 sbin]# ls -l libvirtd -rwxr-xr-x 1 root root 380064 Jun 10 02:33 libvirtd [root@wlng-ppcore-nd3 sbin]# ./libvirtd --version ./libvirtd (libvirt) 0.6.3 ------------------------------------------------------------------------------------------------------------------------------------ [root@wlng-ppcore-nd3 sbin]# pwd /usr/local/sbin [root@wlng-ppcore-nd3 sbin]# ls -l total 3084 -rwxr-xr-x 1 root root 3152977 Jun 10 01:25 libvirtd [root@wlng-ppcore-nd3 sbin]# ./libvirtd --version ./libvirtd (libvirt) 0.8.1 ------------------------------------------------------------------------------------------------------------------------------------ found a link which mentions libvirtd can be old hence this error is possible... not sure how to configure the latest libvirtd? How to solve "unknown procedure: 159" runtime error? Thanks, osvdev

1 0

Re: [libvirt-users] upgrading from 0.7.2 to 0.8.1
by Todd, John A 08 Jun '10

08 Jun '10

I'm still interested in knowing what vbox:///system is, but I figured out that I have manually specify -with-xen when building to get Xen support. If after I get the Xen development package and rebuild it still doesn't work, I'll drop a line here. - JT From: Todd, John A Sent: Tuesday, June 08, 2010 1:39 PM To: 'libvirt-users(a)redhat.com' Subject: upgrading from 0.7.2 to 0.8.1 Hi, I had 0.7.2 running as an out-of-the-box version of libvirtd I ran xend and it could connect to xen:/// (with virsh) I'm trying to build a eucalyptus cloud and its not working, saying 'cannot connect to xen:///' and I don't know why. So I figure I'd get the source and try and figure it out....and upgrade while I was at it. I got 0.8.1 from source, built it and installed it. First of all, it installed everything using /usr/local as its root, is this configurable? I mean doing that it left my 0.7.2 still there and I had to do some magic to replace it with the new stuff. Now it connects to vbox:///system fine, but can't see xen:/// What's vbox:///system anyway? Could it be my xend is talking to old binaries? (though I don't know what they would be exactly) Is there some configuration (beyond the certificate stuff which I did to get libvirt actually up and running) with 0.8.1 (or in general as configuration for 0.7.2 was done behind the scene as part of OS install) That I need to do so it can connect to xen:/// again? I'm not subscribed to the list, please email responses directly to me at todjo06(a)ca.com Thanks. - Q

1 0

[libvirt-users] upgrading from 0.7.2 to 0.8.1
by Todd, John A 08 Jun '10

08 Jun '10

Hi, I had 0.7.2 running as an out-of-the-box version of libvirtd I ran xend and it could connect to xen:/// (with virsh) I'm trying to build a eucalyptus cloud and its not working, saying 'cannot connect to xen:///' and I don't know why. So I figure I'd get the source and try and figure it out....and upgrade while I was at it. I got 0.8.1 from source, built it and installed it. First of all, it installed everything using /usr/local as its root, is this configurable? I mean doing that it left my 0.7.2 still there and I had to do some magic to replace it with the new stuff. Now it connects to vbox:///system fine, but can't see xen:/// What's vbox:///system anyway? Could it be my xend is talking to old binaries? (though I don't know what they would be exactly) Is there some configuration (beyond the certificate stuff which I did to get libvirt actually up and running) with 0.8.1 (or in general as configuration for 0.7.2 was done behind the scene as part of OS install) That I need to do so it can connect to xen:/// again? I'm not subscribed to the list, please email responses directly to me at todjo06(a)ca.com Thanks. - Q

1 0

[libvirt-users] Best practices on backingup/restore VMs
by Arthur Pemberton 08 Jun '10

08 Jun '10

I just moved from F11 to F13 and I'm find no information on the best way to restore VMs. I had just copied /var/lib/libvirt (with the VMs off) as part of my backup (I already backup all of /etc). But virt-manager doesn't allow creations of VMs without installing. Also, as a side note, the search feature on the website doesn't seem to allow me to search using documentation only. -- Fedora 13 (www.pembo13.com)

2 2

[libvirt-users] Dual-boot and also use raw disk in virtual machine
by Richard Walker 07 Jun '10

07 Jun '10

I've got a new computer with two SATA disks. I installed a minimal Fedora 13 64-bit on the first disk. I shut down the computer, unplugged the first disk, booted up and installed Windows 7 on the second disk. Then I shut down, and plugged the first disk back in. I added a grub option to boot Windows from the second disk. All fine so far - I had a working dual boot system. Then in F13 using virt-manager I created a virtual machine using the second disk as a raw disk. Well, the only option I had (using virt-manager, at least) was to configure it as an IDE disk. Booting this virtual machine gets as far as "Starting Windows", and the animation appears (a dot or two), and then BSOD. Running the Windows diagnosis didn't help. I gave up. Then, keeping the same virtual machine configuration, I installed Windows 7 again into the virtual machine. I shut down the computer and booted from the second disk. Saw "Starting Windows", and the animation got a bit further, but got a BSOD again. Now running sfdisk -l /dev/sdb in the F13 host shows: Disk /dev/sdb: 121601 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 * 0+ 12- 13- 102400 7 HPFS/NTFS start: (c,h,s) expected (0,32,33) found (2,0,33) end: (c,h,s) expected (12,223,19) found (205,3,19) /dev/sdb2 12+ 121601- 121589- 976657408 7 HPFS/NTFS start: (c,h,s) expected (12,223,20) found (205,3,20) end: (c,h,s) expected (1023,254,63) found (1023,15,63) /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty So there is some obvious disagreement about the partition table. Am I going to be able to get this to work?

2 8

[libvirt-users] host OS can't access internet but guest OS with bridge can
by scar 05 Jun '10

05 Jun '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 i have a desktop with ubuntu 9.04 on it... it needs to be updated but i can't access the internet since its last reboot. it has linux 2.6.28-18-generic on it, and libvirt 0.6.1-0ubuntu5.1. i setup libvirt for bridging, and a guest OS i have running can access the internet fine. when i try to ping someplace from the host, it can resolve the hostname but i get "Destination Host Unreachable" errors. it uses the router for DNS, and i can access the router and other local computers fine. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 br0 $ -----BEGIN PGP SIGNATURE----- iEYEAREIAAYFAkwKkZMACgkQXhfCJNu98qCt3wCffrY0VvAL0eA+uoVjHOIgnBax 5isAoPJTwxX/KLSOxA9UZDwO6a4ALkLx =LE+h -----END PGP SIGNATURE-----

1 0

[libvirt-users] libvirt with opennebula
by marwen marwen 03 Jun '10

03 Jun '10

hello I'm currently using libvirt and opennebula. I have installed the libvirt with the driver of opennebule "ONE" and I test the installation. /********************************************************/ oneadmin@node016 ~]$ virsh -c one:/// Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # list Id Name State ---------------------------------- virsh # /********************************************************/ but I can not see the list of machines that run in the cluster node (Xen and KVM) I want to know if this is a problem of configuration files ( libvirtd.conf and oned.conf). can you help me to overcome this problem thank you

2 3