- Users - libvirt List Archives

[libvirt-users] [Libvir] libvirt & vde_switch
by Robert Šmol 02 May '11

02 May '11

Hi, I would like to ask about status of VDE and libvirt. I found a thread from http://www.redhat.com/archives/libvir-list/2008-February/msg00030.html. I am not interested in connecting the VDE to the outside world. I have created a FW machine using macvtap. To this machine I would like to attach machines from different zones (dmz, prod, cust). I was thinking on using VDE and vlans (FW would have 1 interface in each vlan - machines also), but I am not aware how to configure this in libvirt. I now assume I can do the same setup with regular bridges for the moment (benefit of VDE would be only 1 switch for many vlans). Regards, Robert -- stereoIT - Open Source Technology Partners http://www.stereoit.com mobile: +420 776 762378

4 9

[libvirt-users] port forwarding
by Ireneusz Szcześniak 28 Apr '11

28 Apr '11

Hi, I'm using CentOS release 5.6 (Final) and Xen 3.1. I'm writing to ask how to configure port forwarding. With virt-manager 0.6.1 I added the machines, but there I don't see an option for port forwarding. I would like to reach the VM on a specific port of the host machine. Once the machinces are running, I can configure iptables so that the port forwarding works, but after host reboots, other rules are inserted (put in front of my rules), which disable my rules. I guess these rules are put by libvirt, and so I'm writing to this list. These are the rules inserted: Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable I need to have a different rules for 192.168.122.0/24: the states RELATED,ESTABLISHED are fine, but I need the NEW state put there too, so that the new forwards can go through. Thanks, Irek -- Ireneusz (Irek) Szczesniak http://www.irkos.org

3 4

[libvirt-users] Disk not bootable from yesterday resolved
by David Brown 27 Apr '11

27 Apr '11

Just an update and a thanks. The not bootable issue I was having yesterday ended up being for some odd reason the disk type in the domain define xml file had been switched to the disk being "raw" rather than qcow2 format. When I changed:<driver name='qemu' type='raw'/> to <driver name='qemu' type='qcow2'/> It booted without issue. I'm not clear how that got changed on the original domain. It was in use without issue about a week ago. :/ I then ran the clone again and it cloned fine, but had the boot issueagain. I checked the cloned domain.xml file and again it said typeraw. I changed it again to qcow2 and it booted fine. Bug? Shouldn't it keep the type in the config the same? Anyway, thanks for help and especially the quick responses! Dave

2 2

[libvirt-users] problem installing libvirt from source
by Lars Nordin 27 Apr '11

27 Apr '11

I'm trying to compile and install libvirt-0.9.0 on Ubuntu v10.04. The make and install went fine and I don't see any errors but there isn't a libvirt directory created in /usr/local/lib/python2.6/dist-packages. I specified configure --with-vmware -with-esx (and later --with-python), then make, then sudo make install. >From config.log: prefix = /usr/local exec_prefix = ${prefix} pyexecdir = ${exec_prefix}/lib/python2.6/dist-packages pythondir = ${prefix}/lib/python2.6/dist-packages pkgpyexecdir = ${pyexecdir}/libvirt pkgpythondir = ${pythondir}/libvirt

3 3

Re: [libvirt-users] virt-clone: clone not bootable
by David Brown 27 Apr '11

27 Apr '11

It says: booting from hard disk Booting failed device not bootable FATAL: failed to boot from device. Or something very similar. Whit Blauvelt <whit.virt(a)transpect.com> wrote: >On Tue, Apr 26, 2011 at 01:45:23PM -0700, David Brown wrote: >> The clone was made with the following command: virt-clone -o centos -n >> centosclone -f /path/to/new/image.img >> I've attempted it several times and get the same result. >> Has anyone seen this or know how to resolve it? > >I've often cloned CentOS 5.5 KVM VMs with that same invocation, and no >problem. > >When you say it's "not bootable," what exactly do you see at time of >failure? > >Whit

3 2

[libvirt-users] virt-image issue
by Zvi Dubitzky 27 Apr '11

27 Apr '11

Hi Does anybody work with the virt-image utility. - I do not see where/how one specifies the pre-defned image or the CD iso image to produce the image from - what is the .xml file requested for ? I guess it is the output xml file I just used the command with an existing .xml file (thought the utility will modify it according to the specified flags) but got the error message : "ERROR Cannot parse 'vmTest3.xml': Root element is not 'image" Any idea what is missing ? thanks Zvi Dubitzky Email:dubi@il.ibm.com

2 1

[libvirt-users] virt-clone: clone not bootable
by David Brown 26 Apr '11

26 Apr '11

Hi, Not sure if this is the right mailing list, but... I have a Linux VM (CentOS 5.4) VM. I cloned it with virt-clone, but the clone isn't bootable. When I attempt to boot it says: Booting from hard diskBoot failed: not a bootable diskFATAL: No bootable device The clone was made with the following command: virt-clone -o centos -n centosclone -f /path/to/new/image.img I've attempted it several times and get the same result. Has anyone seen this or know how to resolve it? Thanks,Dave

2 1

[libvirt-users] Adding more disks...
by Dale Amon 26 Apr '11

26 Apr '11

I need a VM with about 6-8 qcow2 disk images, but it seems to only allow 4 disks on the ide, like the real hardware. What lines do you need to add on to the xml definition file to get hde, hdf, hdg, etc?

2 2

[libvirt-users] How to providing virtual USB disk (usb-storage for QEMU) devices to guests?
by oPKo o 26 Apr '11

26 Apr '11

Hi, I am trying to provide virtual USB disk devices to guests but without success. With QEMU is simple to plug the virtual USB disk with the command: (qemu) drive_add 0 id=my_usb_disk,if=none,file=usbdisk.img OK (qemu) device_add usb-storage,id=my_usb_disk,drive=my_usb_dis I can do this with libvirt? PK PS: sorry for my poor english

1 0

[libvirt-users] problem with qemu
by Miroslav Ludvik 25 Apr '11

25 Apr '11

Hi All, I use Ubuntu server 10.04 LTS as virtualization platform. Actually running kernel 2.6.32-31-server #61-Ubuntu S root@jupiter:~# uname -a Linux jupiter 2.6.32-31-server #61-Ubuntu SMP Fri Apr 8 19:44:42 UTC 2011 x86_64 GNU/Linux We have on running virtual root@jupiter:~# virsh list --all Id Name State ---------------------------------- 1 kvmtik.4safety.cz running I run script for create virtual system wrote root@jupiter:~# make-hestia.4safety.cz.sh 2011-04-24 21:13:25,613 ERROR : ubuntu-kvm already exists Traceback (most recent call last): File "/usr/bin/vmbuilder", line 24, in <module> cli.main() File "/usr/lib/python2.6/dist-packages/VMBuilder/contrib/cli.py", line 81, in main raise VMBuilderUserError('%s already exists' % destdir) VMBuilder.exception.VMBuilderUserError: ubuntu-kvm already exists /usr/local/bin/make-hestia.4safety.cz.sh: line 29: --libvirt=qemu:///system: No such file or directory I try restart libvirt and system wrote to syslog root@jupiter:~# /etc/init.d/libvirt-bin restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service libvirt-bin restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the restart(8) utility, e.g. restart libvirt-bin libvirt-bin start/running, process 25202 root@jupiter:~# tail -f /var/log/syslog Apr 24 20:25:01 jupiter CRON[25031]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Apr 24 20:35:01 jupiter CRON[25036]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Apr 24 20:45:01 jupiter CRON[25042]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Apr 24 20:55:01 jupiter CRON[25048]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Apr 24 21:05:01 jupiter CRON[25152]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Apr 24 21:15:01 jupiter CRON[25183]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Apr 24 21:17:01 jupiter CRON[25189]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 24 21:17:58 jupiter libvirtd: 21:17:58.089: warning : qemudDispatchSignalEvent:385 : Shutting down on signal 15 Apr 24 21:17:58 jupiter libvirtd: 21:17:58.617: error : udevStrToLong_ui:73 : Failed to convert '008' to unsigned int#012 Apr 24 21:17:59 jupiter kernel: [106086.771154] lo: Disabled Privacy Extensions Than for your help. Mirek

2 1