- Users - libvirt List Archives

[libvirt-users] How to dedicate a NIC for VM traffic without assigning it an IP
by Albert Chin 07 Sep '11

07 Sep '11

I am testing out a new server with RHEL6 running KVM. We have a few NICs on the server, one of which we would like to dedicate to network traffic to/from the virtual guests. Is it possible to do this without assigning an IP address to the NIC? We're currently doing something like this with Vmware Server, HP's HPVM for HP-UX/IA, and IBM's PowerVM for AIX. -- albert chin (china(a)thewrittenword.com)

2 1

[libvirt-users] Libvirt migration with Xen 4.1.1
by Rogério Vinhal Nunes 06 Sep '11

06 Sep '11

Hello, I am trying to migrate a virtual machine between two xen 4.1.1 hosts using libvirt, but as I use this command: virsh migrate --live vm102 xen+ssh://10.0.254.8 The following error happens: error: POST operation failed: xend_post: error from xen daemon: (xend.err "can't connect: [Errno -2] Name or service not known") The live migration works fine using "xm --live migrate vm102 10.0.254.8", so everything is correctly set up. Am I doing something wrong? Xen = 4.1.1 Ubuntu = 10.04 virsh version = Using library: libvir 0.8.8 Using API: Xen 3.0.1 Running hypervisor: Xen 4.1.0

1 0

[libvirt-users] vlan and libvirt
by Vidon Guillaume 05 Sep '11

05 Sep '11

Hi, I have to deploy some Ubuntu machines via pxe/dhcp/tftp/preseed/puppet on a vlan. the switches are configured to add vlan tag to the traffic to/from those machines. To test new configuration, i tried to configure a domain alike it was connected by a port of a managed switch configured in general mode where untag id is not 1. Anybody have already done this ? Can i use openvswitch to do this ? Thank you GV

1 0

[libvirt-users] RAID1 over IP?
by David Ehle 05 Sep '11

05 Sep '11

I asksed about this in November last year but got on response. Anyone have any ideas now? Does anyone here have any experience with using KVM/libvirt with RAID1 over IP/DRBD or other HA solution? I'm trying to figure out the hardware configuration I would need to be able to survive a failure or planned shutdown of any one unit in a virtualization cluster. KVM/libvirt makes moving running VM's from one host to another a no brainer, but I'm trying to figure out the right way to be able to take a the storage backend for maintenance without disrupting the VMs. Right now I'm thinking something like KVM + libvirt + heartbeat/corosync + pacemaker + DBRM on Ubuntu 10.04 with 3 or 4 nodes - 2 hosts, 2 storage, or 1 host, 1 host + storage, 1 storage. Any thoughts? Thanks!

3 5

[libvirt-users] Char dev error
by Jatin Kumar 04 Sep '11

04 Sep '11

Hello, I have been trying to migrate a guest from one host to another. But it is showing this error: virsh --connect qemu+ssh://root@host1/system migrate --live --undefinesource testvm3 qemu+ssh://root@host2/system tcp://host2:48160 error: operation failed: failed to retrieve chardev info in qemu with 'info chardev' I have tried this command from the host1 also but it shows the same error. Another thing i would like to ask is the that whats the use of migrateuri in migrate command ? -- Jatin Kumar

2 3

[libvirt-users] ssh connection problem
by zahra tavakoli 02 Sep '11

02 Sep '11

Hello, I have a problem in remote connection to libvirt deamon. when I add the ssh connection in virt-manager, this error message appears: server closed connection: Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 1022, in _try_open None], flags) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 107, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: server closed connection: Please let me know what the problem is. Thanks.

1 0

[libvirt-users] New with Libvirt and having problems.
by Kevins Thoughts 30 Aug '11

30 Aug '11

Hi all. I've been playing around with KVM for a bit now and have several virtual machines up and running. Having passed what I considered "first look" stage, I'm ready to start using libvirt as a manager. For reference, pre-libvirt, I have started this VM with: /kvm -net nic,model=virtio -net tap,ifname=tap5,script=no -drive file=test1.img,if=virtio,boot=on -curses -no-reboot -m 1g -smp 2/ I have a test environment I like to play with, and created the initial domain XML using virt-install: /virt-install --name "Test" --ram 1024 --vcpus=2 --cpu host --description "Test VM" --import --file test1.img --os-type=linux --os-variant=virtio26 --network bridge=br0,model=virtio --graphics=none --autostart --prompt/ When I look in /var/log/libvirt/qemu/Test.log I see the VM is started with the command (edited down to the relevant parts): //usr/bin/qemu-kvm -S -m 1024 -smp 2 -name Test,process=qemu:Test -nographics -boot c -drive file=/kvms/test1.img,if=none,boot=on /This has two problems: 1) The "-S" is keeping the system from booting 2) the "if=none" needs to be "if=virtio" I've confirmed both by changing -nographics to -curses and watching what happens. For #1, its a big fat nothing (no surprise since -S turns off the CPUs), for #2 grub loads and the kernel boots, but my /dev/vda3 isn't found so "init" can't start. I'm anticipating a 3rd problem: I don't see where to specify that I want the VM to use "tap5" of my bridged network. Can some kind soul please let me know what I need to change in the domain XML file to fix these issues? Thanks, Kevin ps. I've post this to my blog at http://www.kevinsthoughts.com/2011/08/kvm-management-libvirt/ if anyone would prefer to answer there.

2 2

[libvirt-users] conflict disk error
by Paras pradhan 30 Aug '11

30 Aug '11

Hi, In one of my nodes I am getting libvirt error. -- ERROR Unknown failure Traceback (most recent call last): File "/usr/sbin/virt-install", line 895, in ? main() File "/usr/sbin/virt-install", line 677, in main options.sparse, options.nodisks, guest, ishvm, conn) File "/usr/sbin/virt-install", line 239, in get_disks is_file_path), disk, size) File "/usr/sbin/virt-install", line 239, in <lambda> is_file_path), disk, size) File "/usr/sbin/virt-install", line 202, in get_disk d = cli.disk_prompt(None, kwargs) File "/usr/lib/python2.4/site-packages/virtinst/cli.py", line 277, in disk_prompt if dev.is_conflict_disk(conn) is True: File "/usr/lib/python2.4/site-packages/virtinst/VirtualDisk.py", line 890, in is_conflict_disk xml = vm.XMLDesc(0) File "/usr/lib64/python2.4/site-packages/libvirt.py", line 247, in XMLDesc if ret is None: raise libvirtError ('virDomainGetXMLDesc() failed', dom=self) libvirtError: Unknown failure -- command used: virt-install --nographics --paravirt --name dora --ram 2048 --file /dora.img --file-size 153 --location nfs://mydom:/distributions/redhat60/x86_64/ -x "ks=http://mydom/ks/redhat60-dora.ks ip=x.x.x.x netmask=255.255.255.0 dns=x.x.x.x gateway=x.x.x.x" -b xenbr0 Ideas? Thanks Paras.

1 0

Re: [libvirt-users] New with Libvirt and having problems.
by Kevins Thoughts 30 Aug '11

30 Aug '11

> > Ah I never gave KVM or virtualization a try in Gentoo. None of my > servers have X though using X11 forwarding still works. In CentOS the > package is xorg-x11-xauth , looks like it may be x11-apps/xauth in > Gentoo. No X anywhere in my environment <smile>. Somehow I normally manage! > > Does "virsh iface-list" show tap5? Actually that command errors out: /virsh # iface-list error: Failed to list active interfaces error: this function is not supported by the connection driver: virConnectNumOfInterfaces/ > > For the disk, this is what I have for my virtio disks... > > <disk type='file' device='disk'> > <driver name='qemu' type='qcow2'/> > <source file='/vmstore/images/domain0001.qcow2'/> > *<target dev='vdb' bus='virtio'/>* > <address type='pci' domain='0x0000' bus='0x00' slot='0x06' > function='0x0'/> > </disk> My XML had the type wrong, setting it to raw. Alas, I still see the invoked KVM being passed: /-drive file=/kvms/test1.img,if=none,id=drive-virtio-disk0,boot=on,format=qcow2 / The "if=none" is the problem, it needs to be "if=virtio". KVM is also still being passed the "-S" flag as its first parameter, so the CPUs are not starting. > > Also maybe add something like this to your virt-install line... > > "--disk path=test1.img,device=disk,bus=virtio" At this point, I'm just editing the XML, its easier. Once I get one working, I can tweak for the others. Virt-install at least got me started. Kevin

1 0

[libvirt-users] Fwd: Re: New with Libvirt and having problems.
by Kevins Thoughts 30 Aug '11

30 Aug '11

On 8/29/2011 10:29 PM, Trey Dockendorf wrote: > Have you looked into using virt-manager? When I started using KVM I > found that new VM provisioning was much simpler with that interface. Alas, Virtmanager doesn't seem to be a supported program under Gentoo - the distribution I use. If its X-based, it wouldn't work anyhow - I'm strictly a command line shop. > > Once you've created your domain with "virt-install" you can make > changes using virsh. > > virsh -c qemu:///system edit Test > > That will allow you to directly edit the domain. > > In the virt-install line you used "bridge=br0" , maybe replace that > with "bridge=tap5". If that doesn't do it, once your editing the XML > you can try something like the following... I'm familiar with virsh edit and have used it to probe around a bit. Actually tried the "bridge=tap5" a few days ago and get the message: /ERROR internal error Failed to add tap interface to bridge. tap5 is not a bridge device/ > > <interface type='bridge'> > <mac address='52:54:00:4d:74:c7'/> > <source bridge='tap5'/> > <model type='virtio'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x0'/> > </interface> > > That was created using virt-manager, so you probably need to use what > virt-install created for your mac address and address. Gave that a shot, attempting to create a new domain with "br0" replaced by "tap5" and got the same error message: /error: internal error Failed to add tap interface to bridge. tap5 is not a bridge device/ > > Is your init failing on /dev/vda3 and then kernel panic? If so it's > likely your guest OS doesn't have the necessary kernel modules loaded. > Depending on your distro it will vary, but using CentOS 6 I've found > they are automatically loaded. This is what's loaded in CentOS 6 Well, yes and no. Its failing with a kernel panic because KVM is being started with if=none instead of if=virtio. If I manually change it, it works fine. Just need to know where to update that in the domain XML file. For what its worth, the image runs 100% fine with started manually with: /kvm -net nic,model=virtio -net tap,ifname=tap5,script=no -drive file=test1.img,if=virtio,boot=on -curses -no-reboot -m 2g -smp 2/ So I know the image is good. > > # lsmod | grep virtio > virtio_blk 5087 5 > virtio_pci 6733 0 > virtio_ring 7169 2 virtio_blk,virtio_pci > virtio 4824 2 virtio_blk,virtio_pci > > Try changing the disk to ide , and then verifying your system is able > to load the virtio modules. > > Also , once you have your XML the way you like, if your going to stick > with command line look at using virsh though I highly recommend > virt-manager. > > I'm still very new to KVM myself, so hopefully that was of some use > > - Trey Thanks!

1 0