- Users - libvirt List Archives

[libvirt-users] Can't NAT in KVM
by Borden Rhodes 28 Jul '12

28 Jul '12

Good morning, list, I've been trying to get my KVM virtual machines to connect to the Interwebs for the last 3 hours with no success. I'm running Debian Wheezy (fully patched) and building virtual machines using KVM in Virt Manager. With the default, factory settings shown in virt manager, I have a default virtual network with the device name virbr0, which starts on boot and uses the default IPv4 subnets. I also have the default lo (loopback) network interface. I have tried creating a Windows 8 Release Preview machine and a Kubuntu Live CD machine. Despite recognising the hardware and network interface, neither machine will connect to the Internet. From what I can see in both virtual machines, it seems that neither is getting a DHCP lease from virbr0. I'm not sure what's broken or where to start looking for trouble because both the logs and the documentation are fairly sparse. Other possibly relevant information: I have a simple firewall configured with Firestarter in Wheezy. I use Network Manager to manage my only wireless connection to the world. I don't want to set up any fancy bridging or override /etc/interfaces because I only use virtual machines rarely but I rely on Network Manager to set up my laptop's networks so I don't have to. Any suggestions on how I can plug the v-machines to the web? With thanks, Borden

4 6

[libvirt-users] How can I make sVirt work with LXC (libvirt-0.9.13)?
by David Kang 26 Jul '12

26 Jul '12

Hi, I've installed libvirt-0.9.13 on RHEL6.2 from the source code. I cannot make sVirt working with LXC. (sVirt works well with KVM, though.) I can start an LXC instance, but the label of the process is not right. Can someone help me? I tried to change /etc/libvirtd/lxc.conf file to explicitly enable security_driver = "selinux". But it ends up with error saying "error : virSecurityDriverLookup:74 : internal error Security driver selinux not found". SELinux is in a permissive mode but is not enforcing. The current situation is as follows: * The label of an LXC container is not properly done: $ ps auxZ | grep lxc unconfined_u:system_r:virtd_t:s0-s0:c0.c1023 root 27998 0.0 0.0 34716 1160 ? Ss 11:54 0:00 /usr/libexec/libvirt_lxc --name instance-0000001f --console 16 --security=none --handshake 19 --background --veth veth1 * This is the lable of libvirtd process: $ ps auxZ | grep libvirtd unconfined_u:system_r:virtd_t:s0-s0:c0.c1023 root 27376 0.1 0.0 919052 5324 ? Sl 11:51 0:00 libvirtd --daemon * Here is the xml file that I used to run LXC instance, which was generated by OpenStack: <domain type="lxc"> <uuid>621adc56-2103-465c-bafd-1d0b51bea3a0</uuid> <name>instance-0000001f</name> <memory>2097152</memory> <vcpu>1</vcpu> <os> <type>exe</type> <cmdline>console=ttyS0</cmdline> <init>/sbin/init</init> </os> <clock offset="utc"/> <devices> <filesystem type="mount"> <source dir="/usr/local/nova/instances/instance-0000001f/rootfs"/> <target dir="/"/> </filesystem> <interface type="bridge"> <mac address="fa:16:3e:1e:33:f4"/> <model type="virtio"/> <source bridge="br100"/> <filterref filter="nova-instance-instance-0000001f-fa163e1e33f4"> <parameter name="IP" value="10.0.0.4"/> <parameter name="DHCPSERVER" value="10.0.0.3"/> <parameter name="PROJNET" value="10.0.0.0"/> <parameter name="PROJMASK" value="255.255.0.0"/> </filterref> </interface> <console type="pty"/> </devices> </domain> * Svirt works well with KVM as is shown below: $ ps auxZ | grep qemu system_u:system_r:svirt_t:s0:c128,c132 root 22710 6.9 0.2 895040 34332 ? Sl 11:17 0:07 /usr/libexec/qemu-kvm -name instance-0000001b -S -M pc-0.14 -cpu core2duo,+lahf_lm,+dca,+pdcm,+xtpr,+cx16,+tm2,+est,+vmx,+ds_cpl,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -uuid 12716b13-001c-40de-9537-ca847aead70b -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/instance-0000001b.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew -no-kvm-pit-reinjection -kernel /usr/local/nova/instances/instance-0000001b/kernel -initrd /usr/local/nova/instances/instance-0000001b/ramdisk -append root=/dev/vda console=ttyS0 -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/usr/local/nova/instances/instance-0000001b/disk,if=none,id=drive-virtio-disk0,format=qcow2,cache=none -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=17,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:7a:5e:b6,bus=pci.0,addr=0x3 -chardev file,id=charserial0,path=/usr/local/nova/instances/instance-0000001b/console.log -device isa-serial,chardev=charserial0,id=serial0 -chardev pty,id=charserial1 -device isa-serial,chardev=charserial1,id=serial1 -device usb-tablet,id=input0 -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 Thanks, David ---------------------- Dr. Dong-In "David" Kang Computer Scientist USC/ISI

1 1

[libvirt-users] libvirt shortcomings of virsh domxml-to-native and domxml-from-native
by 张光鹏 26 Jul '12

26 Jul '12

Hi,all. we use libvirt to manage some host and vms on vmware hypervisor.I have found the libvirt there are some shortcomings . Such as virsh domxml-to-native and domxml-from-native .I have reviewed the libvirt source --src/vmx/vmx.c, code as follows : libvirt0.9.13源码xml 转化成vmxvmx转化成xml /* def:os.arch -> vmx:guestOS */ if (def->os.arch == NULL || STRCASEEQ(def->os.arch, "i686")) { virBufferAddLit(&buffer, "guestOS = \"other\"\n"); } else if (STRCASEEQ(def->os.arch, "x86_64")) { virBufferAddLit(&buffer, "guestOS = \"other-64\"\n"); } else { VMX_ERROR(VIR_ERR_INTERNAL_ERROR, _("Expecting domain XML attribute 'arch' of entry 'os/type' " "to be 'i686' or 'x86_64' but found '%s'"), def->os.arch); goto cleanup; }/* vmx:guestOS -> def:os.arch */ if (virVMXGetConfigString(conf, "guestOS", &guestOS, true) < 0) { goto cleanup; } if (guestOS != NULL && virFileHasSuffix(guestOS, "-64")) { def->os.arch = strdup("x86_64"); } else { def->os.arch = strdup("i686"); } if (def->os.arch == NULL) { virReportOOMError(); goto cleanup; } Vmware support many guestOS types like "windows7srv-64 ",If I use 64-bit Windows virtual machine, other-64 this type is not correct. NIC e1000 system can not be used . So I suggest to The libvirt improve the vmware support, especially the mutual transformation of the xml and vmx format guestOS only one parameter. Thanks all. 张光鹏 tel: 13718913184 mail: zhanggp(a)neusoft.com 移动互联网事业部东软集团股份有限公司 http://www.neusoft.com --------------------------------------------------------------------------------------------------- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. ---------------------------------------------------------------------------------------------------

3 2

[libvirt-users] No /dev/tty device within LXC guest?
by Yufang Zhang 26 Jul '12

26 Jul '12

Hi all, When I create a LXC guest(RHEL5.4) via libvirt, the guest could boot successfully. I could ping to guest, but can not ssh into the it. The secure log in the guest shows that this is due to lack of '/dev/tty' device: # tail /path/to/rootfs/of/container/var/log/secure Jul 27 04:25:25 xen2143v sshd[671]: Accepted password for zhangyufang from 10.0.0.1 port 34102 ssh2 Jul 27 04:25:25 xen2143v sshd[671]: pam_unix(sshd:session): session opened for user zhangyufang by (uid=0) Jul 27 04:25:25 xen2143v sshd[671]: pam_loginuid(sshd:session): set_loginuid failed *Jul 27 04:25:25 xen2143v sshd[671]: error: PAM: pam_open_session(): Cannot make/remove an entry for the specified session* *Jul 27 04:25:25 xen2143v sshd[674]: error: open /dev/tty failed - could not set controlling tty: No such file or directory* *Jul 27 04:25:25 xen2143v sshd[673]: Received disconnect from 10.0.0.1: 11: disconnected by user* The xml of the guest: # virsh --connect lxc:/// dumpxml instance-00000034 <domain type='lxc' id='30090'> <name>instance-00000034</name> <uuid>8387e0f1-6df3-41c8-82ba-cde7d2b60844</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64'>exe</type> <init>/sbin/init</init> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='/var/lib/nova/instances/instance-00000034/rootfs'/> <target dir='/'/> </filesystem> <interface type='bridge'> <mac address='fa:16:3e:3c:1d:95'/> <source bridge='demonetbr0'/> <target dev='veth0'/> <filterref filter='nova-instance-instance-00000034-fa163e3c1d95'> <parameter name='DHCPSERVER' value='10.0.0.1'/> <parameter name='IP' value='10.0.0.3'/> </filterref> </interface> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> </console> </devices> </domain> Could anyone point me to where the problem is? Thanks. Best Regards. Yufang

1 0

[libvirt-users] VM dies with error regarding "virConnectNumOfInterfaces"
by Helga Velroyen 25 Jul '12

25 Jul '12

Hi! I ran into a problem using a USB device and was wondering if you could help me. I'm running a Win XP SP3 in a VM with libvirt on a Xubuntu 11.10. I configured it to talk to several USB devices. With one particular device (a Phonak Compilot[1], admittedly a probably rather unusual device), the VM dies with the following error in the libvirtd.log: 2012-07-20 21:04:19.591+0000: 1282: error : virConnectNumOfInterfaces:9803 : this function is not supported by the connection driver: virConnectNumOfInterfaces 2012-07-20 21:05:05.762+0000: 1276: error : qemuMonitorIO:603 : internal error End of file from monitor This happens no matter if is it the only configured USB device or if there is another USB device present in the config or not. I configured it doing the following steps: - I looked up the vendor / product ID using lsub Bus 001 Device 003: ID 180f:1002 (Interestingly, it does not show a name of the device here.) - I added it to the VM's xml configuration using virsh / edit $vmname <domain> ... <devices> ... <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x180f'/> <product id='0x1002'/> </source> </hostdev> ... </devices> </domain> - I run the VM using the virt-manager UI. Any ideas what the problem could be? Do I need to run/configure differently than how I did it? To me it sounds as if there is some implementation missing? Is there a workaround for it? I hope you can give me some clues. Thank you! Helga [1] http://www.phonak.com/com/b2c/en/products/accessories/compilot-tvlink-s/ove…

2 4

[libvirt-users] virsh iface-list error
by Arun Sharma 25 Jul '12

25 Jul '12

Hello Facing below error while trying to access the iface-list. # virsh iface-list *error: Failed to list active interfaces error: this function is not supported by the connection driver: virConnectNumOfInterfaces* root@kvm-1:/usr/local/src/libvirt# virsh list Id Name State ---------------------------------------------------- 1 vm1 running After some finding, i saw it require me to build libvirt with --with-netcf. I tried that too but still facing the same problem. Here are the steps perform on Ubuntu 1204 (64 bit) + qemu KVM. # git clone git://libvirt.org/libvirt.git # ./autogen.sh --prefix=/usr --with-qemu --with-init-script=upstart --with-yajl --with-netcf --with-network --with-init-script=upstart --with-libvirtd # make # make install # /usr/sbin/libvirtd & # /usr/sbin/dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/default.pid --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override Pl. let me know what could be the problem? Thanks Arun

4 3

[libvirt-users] CPU-Capabilties for Nested Virtualization
by Michael Beham 25 Jul '12

25 Jul '12

Hi, I have some questions about the CPU-Capabilities for Virtualization especially for Nested Virtualization like the Turtles Project. I am trying to create a Nested Environment by following the instruction of: http://kashyapc.wordpress.com/2012/01/18/nested-virtualization-with-kvm-and… The bare-metal system is a Dell Server with following CPU-Flags (virsh capabilities) <cpu> <arch>x86_64</arch> <model>Opteron_G4</model> <vendor>AMD</vendor> <topology sockets='1' cores='8' threads='2'/> <feature name='nodeid_msr'/> <feature name='wdt'/> <feature name='skinit'/> <feature name='ibs'/> <feature name='osvw'/> <feature name='cr8legacy'/> <feature name='extapic'/> <feature name='cmp_legacy'/> <feature name='fxsr_opt'/> <feature name='mmxext'/> <feature name='osxsave'/> <feature name='monitor'/> <feature name='ht'/> <feature name='vme'/> </cpu> After adding this Flags to the XML of my first VM, the following XML-Attributes are written to the file, after reopening it. <cpu mode='custom' match='exact'> <model fallback='allow'>Opteron_G4</model> <vendor>AMD</vendor> <feature policy='require' name='nodeid_msr'/> <feature policy='require' name='wdt'/> <feature policy='require' name='skinit'/> <feature policy='require' name='ibs'/> <feature policy='require' name='osvw'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='extapic'/> <feature policy='require' name='cmp_legacy'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='mmxext'/> <feature policy='require' name='osxsave'/> <feature policy='require' name='monitor'/> <feature policy='require' name='ht'/> <feature policy='require' name='vme'/> </cpu> The problem is, that after adding this attributes to the XML, I am not able to load the kvm-modules in the VM. So I?m not able to install the Nested VM in the VM. But when I?m not adding the attributes to the XML and keep the XML-File of the VM unmodified, I?m able to load the KVM modules in the VM and I can install the Nested Guest. So my first question is, what difference it makes for the Nested Virtualization, when I?m not adding the Attributes and keep the XML-Files unmodified? And my second qestion is, what essential difference is between the qemu version 0.14 which was used by the instruction of Kashyap Chamarthy and the version 1.0 related to Nested Virtualization? I hope you understand my problem because it is quite confusing for me and I?m not sure that I?m using the right techniqe for my Nested Environment!! Best Regards, Mike

1 0

[libvirt-users] Setting CPU type for a vm
by Mauricio Tavares 24 Jul '12

24 Jul '12

I have a Windows XP vm and would like to know how should I set its cpu so it is seen by the vm as a proper 32bit one. In its xml file, I have <os> <type arch='i686' machine='rhel6.2.0'>hvm</type> <boot dev='cdrom'/> <boot dev='hd'/> <bootmenu enable='yes'/> </os> And this is the machine I have (an intel i5): [root@vmhost ~]# virsh nodeinfo CPU model: x86_64 CPU(s): 4 CPU frequency: 1600 MHz CPU socket(s): 1 Core(s) per socket: 4 Thread(s) per core: 1 NUMA cell(s): 1 Memory size: 5904548 kB and this is what virsh thinks my vm has: [root@vmhost ~]# virsh vcpuinfo xp VCPU: 0 CPU: 2 State: running CPU time: 521.3s CPU Affinity: yyyy [root@vmhost ~]# But, the vm reports it not only as a 286 but also claims not to have the right drivers for it. How can I make the vm see it as a 686 or something like that?

3 4

[libvirt-users] help about libvirt console
by lei yang 24 Jul '12

24 Jul '12

Hi list, My xml is like below, it works well with "virsh console qemu1" <domain type='kvm'> <name>qemu1</name> <memory>1024000</memory> <currentMemory>512000</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc'>hvm</type> <boot dev='hd' /> <kernel>/boot/bzImage</kernel> <cmdline>console=ttyS0 root=/dev/hda rw</cmdline> </os> <devices> <disk type='file' device='disk'> <source file='/boot/test.img.raw' /> <target dev='hda' bus='ide' /> </disk> <console type='pty'> <target type='serial' port='0'/> </console> </devices> </domain> I want to use virtio console, so I change <console type='pty'> <target type='virtio' port='0'/> then I do #virsh define newvm.xml #virsh start qemu1 #virsh console qemu1 it show nothing any help for the virtio console seting? Lei

1 0

[libvirt-users] libvirt shortcomings of virsh domxml-to-native and domxml-from-native
by 张光鹏 24 Jul '12

24 Jul '12

Hi,all. we use libvirt to manage some host and vms on vmware hypervisor.I have found the libvirt there are some shortcomings . Such as virsh domxml-to-native and domxml-from-native .I have reviewed the libvirt source --src/vmx/vmx.c, code as follows : libvirt0.9.13源码xml 转化成vmxvmx转化成xml /* def:os.arch -> vmx:guestOS */ if (def->os.arch == NULL || STRCASEEQ(def->os.arch, "i686")) { virBufferAddLit(&buffer, "guestOS = \"other\"\n"); } else if (STRCASEEQ(def->os.arch, "x86_64")) { virBufferAddLit(&buffer, "guestOS = \"other-64\"\n"); } else { VMX_ERROR(VIR_ERR_INTERNAL_ERROR, _("Expecting domain XML attribute 'arch' of entry 'os/type' " "to be 'i686' or 'x86_64' but found '%s'"), def->os.arch); goto cleanup; }/* vmx:guestOS -> def:os.arch */ if (virVMXGetConfigString(conf, "guestOS", &guestOS, true) < 0) { goto cleanup; } if (guestOS != NULL && virFileHasSuffix(guestOS, "-64")) { def->os.arch = strdup("x86_64"); } else { def->os.arch = strdup("i686"); } if (def->os.arch == NULL) { virReportOOMError(); goto cleanup; } Vmware support many guestOS types like "windows7srv-64 ",If I use 64-bit Windows virtual machine, other-64 this type is not correct. NIC e1000 system can not be used . So I suggest to The libvirt improve the vmware support, especially the mutual transformation of the xml and vmx format guestOS only one parameter. Thanks all. 张光鹏 tel: 13718913184 mail: zhanggp(a)neusoft.com 移动互联网事业部东软集团股份有限公司 http://www.neusoft.com --------------------------------------------------------------------------------------------------- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. ---------------------------------------------------------------------------------------------------

1 0