- Users - libvirt List Archives

Cron jobs not working with virsh commands
by Jeff Brown 26 May '23

26 May '23

Recently, while testing backup scripts, I happened to notice that 'virsh snaphot-create-as . . .' has been failing with 'error: failed to get domain '$DOMAIN'' when run through crontab. So I've been unwittingly backing up the live, running, QCOW2 images for quite some time because scripts which run fine when testing from CLI, fail to work as expected when run as a cron job. After much searching, I stumbled upon a related issue with the (obvious?) simple solution almost hidden in the answers. You have to explicitly connect to the local server with, e.g.: virsh -c qemu:///system snapshot-create-as . . . Humble apologies if I missed something I should have been aware of, but I just thought it worthwhile mentioning here for anyone else searching for an answer in the archives. Best regards, Jeff

2 1

fails to start @boot - service-start-limit-hit
by lejeczek 24 May '23

24 May '23

Hi guys. When I login to the system I find: UNIT LOAD ACTIVE SUB DESCRIPTION ● virtproxyd.service loaded failed failed Virtualization daemon ● virtproxyd-admin.socket loaded failed failed Libvirt proxy admin socket ● virtproxyd-ro.socket loaded failed failed Libvirt proxy local read-only socket ● virtproxyd-tls.socket loaded failed failed Libvirt proxy TLS IP socket ● virtproxyd.socket loaded failed failed Libvirt proxy local socket only 'virtproxyd-tls.socket' is enabled -> $ journalctl -l -o cat -u virtproxyd-tls.socket virtproxyd-tls.socket: Failed with result 'service-start-limit-hit'. Closed Libvirt proxy TLS IP socket. But any use of 'virtproxyd-tls.socket' from that point on, is successful - VM migrates to/from okey. I think pcs/pacemaker cluster plays a role in it for it must be - I'm guessing - trying to migrate a single VM back to booting-up node, though.. 'resource-agents-deps.target' is told to 'After=virtproxyd-tls.socket', among other 'after' bits. To confirm this suspicion - I put the node into 'standby' then I reboot and I get none of those failures mentioned above. & to make it an utterly curious test case - all these 'failures' only started after the node was remove from IPA domain ! If I make the node again a client/member of IPA (same as before) domain then - standby or not - all those services above fail @boot no more! I'd be very glad to read suggestions/thoughts you can share. many thanks, L.

1 0

Adding custom xml:ns to definitions for additional application
by Darragh Bailey 19 May '23

19 May '23

Hi, I'm looking at adding support to vagrant-libvirt to add some additional XML to the network definitions it creates following https://libvirt.org/formatnetwork.html#general-metadata assuming the metadata element is to be treated the same as what is listed for domains https://libvirt.org/formatdomain.html#general-metadata (app metadata isn't explained What I was wondering is if there are any expectations around the URI used? Or recommendations? I was hoping to use http://vagrant-libvirt.github.io/v1/network as it's at least under control of the maintainers. However I wasn't planning to publish anything there unless that is needed? Reason behind this is that I want to annotate networks created and managed by vagrant-libvirt so that teardown can be safely done without accidentally destroying networks that have been manually created. As well as allowing CI systems that might have multiple agents running on the same host to be able to safely create and destroy machines with network definitions in parallel with any attempts to remove a network that has just been created being prevented without networks ending up persisting forever. https://github.com/vagrant-libvirt/vagrant-libvirt/issues/1738 summaries what I'm hoping to do. -- Darragh Bailey "Nothing is foolproof to a sufficiently talented fool"

1 0

Invalid value '-1' for 'cpu.max': Invalid argument - a result of?
by lejeczek 17 May '23

17 May '23

Hi guys. In hope that an expert read this - what is, can be, the below a result of? 12284 still running (86040) Invalid value '-1' for 'cpu.max': Invalid argument 12284 still running (86035) 12284 still running (86030) this is a snippet from libvirtd logs which is a consequence of what ovirt's engine setup is doing. To troubleshoot ansible playbooks which is what engine setup does, as I understand it, would be an impossible task for me so I reckoned I should try this end. many thanks, L.

2 5

<qemu:commandline> ignored ?
by lejeczek 16 May '23

16 May '23

Hi guys. I have a domain definition with this: ... <qemu:commandline> <qemu:arg value='-fw_cfg'/> <qemu:arg value='name=opt/com.coreos/config,file=/00-VMs/oshift1node.ign'/> </qemu:commandline> </domain> at the bottom of xml. 'virsh' creates domain a okey but in VM I do not see ignition happened - it's fedora coreos - and when I dumpxml running domain, then indeed those bits, show above, are not there. I'd grateful for any/all thoughts shared on - what is not/happening there. Is there something else which is a prerequisite to 'qemu:commandline' but if yes and I'm missing those, why would not then 'virsh' and/or 'virtqemud' say something? many thanks, L.

5 7

Re: PHP API
by Michal Prívozník 15 May '23

15 May '23

On 5/11/23 20:19, Simon Fairweather wrote: > Hi Michal, > > Would you be able to add, if there is a process you follow I can look at > creating merge requests. > > Regards > Simon > > int virDomainBlockPull (virDomainPtr > <https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainPtr> dom, > const char * disk, > unsigned long bandwidth, > unsigned int flags) > > > int virDomainBlockCopy (virDomainPtr > <https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainPtr> dom, > const char * disk, > const char * destxml, > virTypedParameterPtr > <https://libvirt.org/html/libvirt-libvirt-common.html#virTypedParameterPtr> params, > int nparams, > unsigned int flags)intvirDomainBlockPull (virDomainPtr > <https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainPtr>dom, > > > On Wed, May 3, 2023 at 12:42 PM Michal Prívozník <mprivozn(a)redhat.com > <mailto:mprivozn@redhat.com>> wrote: > > On 4/30/23 20:29, Simon Fairweather wrote: > > Hi Michal > > > > Are there plans to implement snapshot create_as version of the > > following function where XML could be passed? > > Honestly, there are no plans for libvirt-php. I maintain it in my spare > time and implement features as somebody requests them. Let me implement > it. And also fix the issue you've filled earlier this week. > > Michal > Posted as: https://gitlab.com/libvirt/libvirt-php/-/merge_requests/39 Michal

1 0

Windows Guest on KVM running "single core" after windows update
by Benjammin2068 11 May '23

11 May '23

Hey all, I have a Windows 10 pro (64bit) long time running as a libvirt/KVM guest that I think Windows Update finally narfed. The hardware is a supermicro motherboard with dual Intel E5-2640 CPUs for a total of 40 threads and 64GB The guest is allocated 2sockets, 5cores, 2 threads and 32GB of RAM. (I've also tried 1 socket, 20 cores, 1 thread and 1s10c2t -- no help) In an SSH session to the linux host (CentOS7 - up to date), htop shows 1 core pegged and abnormal distribution of load (like it used to) even with fun little tools in Windows like the PowerToy -> CPUStress64.exe (i.e. the head CPU will show 90-99% and next thread in HTOP will show like 10% which then trails off to like 5%) Even if I tell CPUStress64.exe to load up 10 or 15 threads worth of 100%. Has anyone else seen this? Thanks, -Ben

3 5

how to get domain name into the logs - ?
by lejeczek 09 May '23

09 May '23

Hi guys. I have libvirt/qemu setup with pretty vanilla settings and my logs, a snippet, look like this: ... migration successfully aborted internal error: qemu unexpectedly closed the monitor: 2023-05-08T07:56:37.785886Z qemu-kvm: Failed to load virtio_pci/modern_queue_state:desc 2023-05-08T07:56:37.786024Z qemu-kvm: Failed to load virtio_pci/modern_state:vqs 2023-05-08T07:56:37.786029Z qemu-kvm: Failed to load virtio/extra_state:extra_state 2023-05-08T07:56:37.786033Z qemu-kvm: Failed to load virtio-rng:virtio 2023-05-08T07:56:37.786036Z qemu-kvm: error while loading state for instance 0x0 of device '0000:00:02.5:00.0/virtio-rng' 2023-05-08T07:56:37.786279Z qemu-kvm: load of migration failed: Input/output error Would you know how to make libvirt/qemu to get domains/guests names into the logs? (ideally without going into debug/similar level) many thanks, L.

3 3

Using pki/ssl/tls connection.
by Kamil Jońca 04 May '23

04 May '23

I am thinking of using tls connection between my client and server instead of current ssh. I found https://libvirt.org/kbase/tlscerts.html and I want to know if it is possible to customise some setting (e.g. use my own cert names, or locations) but I was not able to. Moreover https://github.com/libvirt/libvirt/blob/44520f6e01580d6bada88b47e5b77e6bee0… suggests that these values are hardcoded. So my questions are: is it possible to customise these values? If so, how? How can I configure virt-manager with two connections, each with different CA? KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html

2 1

PHP API
by Simon Fairweather 03 May '23

03 May '23

Hi Michal Are there plans to implement snapshot create_as version of the following function where XML could be passed? https://github.com/libvirt/libvirt-php/blob/afe404b2cf4bb46cdd39c6ea4df1c7c… Regards Simon.

2 1