- Users - libvirt List Archives

unsubscribe
by Miguel Ping 08 Nov '23

08 Nov '23

1 0

[FOSDEM] Call for participation: Virtualization and Cloud infrastructure Room at FOSDEM 2024
by Piotr Kliczewski 08 Nov '23

08 Nov '23

We are excited to announce that the call for proposals is now open for the Virtualization and Cloud infrastructure devroom at the upcoming FOSDEM 2024, to be hosted on February 3rd 2024. This devroom is a collaborative effort, and is organized by dedicated folks from projects such as OpenStack, Xen Project, KubeVirt, QEMU, KVM, and Foreman. We would like to invite all those who are involved in these fields to submit your proposals by December 8th, 2023. About the Devroom The Virtualization & IaaS devroom will feature session topics such as open source hypervisors or virtual machine managers such as Xen Project, KVM, bhyve and VirtualBox as well as Infrastructure-as-a-Service projects such as KubeVirt, Apache CloudStack, OpenStack, QEMU and OpenNebula. This devroom will host presentations that focus on topics of shared interest, such as KVM; libvirt; shared storage; virtualized networking; cloud security; clustering and high availability; interfacing with multiple hypervisors; hyperconverged deployments; and scaling across hundreds or thousands of servers. Presentations in this devroom will be aimed at developers working on these platforms who are looking to collaborate and improve shared infrastructure or solve common problems. We seek topics that encourage dialog between projects and continued work post-FOSDEM. Important Dates Submission deadline: 8th December 2023 Acceptance notifications: 10th December 2023 Final schedule announcement: 15th December 2023 Devroom: 3rd February 2024 Submit Your Proposal All submissions must be made via the Pretalx event planning site[1]. It is a new submission system so you will need to create an account. If you submitted proposals for FOSDEM in previous years, you won’t be able to use your existing account. During submission please make sure to select Virtualization and Cloud infrastructure from the Track list. Please fill out all the required fields, and provide a meaningful abstract and description of your proposed session. Submission Guidelines We expect more proposals than we can possibly accept, so it is vitally important that you submit your proposal on or before the deadline. Late submissions are unlikely to be considered. All presentation slots are 30 minutes, with 20 minutes planned for presentations, and 10 minutes for Q&A. All presentations will be recorded and made available under Creative Commons licenses. In the Submission notes field, please indicate that you agree that your presentation will be licensed under the CC-By-SA-4.0 or CC-By-4.0 license and that you agree to have your presentation recorded. For example: "If my presentation is accepted for FOSDEM, I hereby agree to license all recordings, slides, and other associated materials under the Creative Commons Attribution Share-Alike 4.0 International License. Sincerely, <NAME>." In the Submission notes field, please also confirm that if your talk is accepted, you will be able to attend FOSDEM and deliver your presentation. We will not consider proposals from prospective speakers who are unsure whether they will be able to secure funds for travel and lodging to attend FOSDEM. (Sadly, we are not able to offer travel funding for prospective speakers.) Code of Conduct Following the release of the updated code of conduct for FOSDEM, we'd like to remind all speakers and attendees that all of the presentations and discussions in our devroom are held under the guidelines set in the CoC and we expect attendees, speakers, and volunteers to follow the CoC at all times. If you submit a proposal and it is accepted, you will be required to confirm that you accept the FOSDEM CoC. If you have any questions about the CoC or wish to have one of the devroom organizers review your presentation slides or any other content for CoC compliance, please email us and we will do our best to assist you. Questions? If you have any questions about this devroom, please send your questions to our devroom mailing list. You can also subscribe to the list to receive updates about important dates, session announcements, and to connect with other attendees. See you all at FOSDEM! [1] <https://penta.fosdem.org/submission/FOSDEM17> https://pretalx.fosdem.org/fosdem-2024/cfp [2] virtualization-devroom-manager at fosdem.org

1 0

Passing through a YubiKey to a Windows VM for physical touch activation
by Michael Kjörling 06 Nov '23

06 Nov '23

I have a need to pass through a YubiKey to a Windows (10) VM guest such that Windows in the guest will let me use it with physical touch activation for 2FA. For those times, I am physically at the VM host, so I don't need _remote_ redirection into the guest, and I'm fine with plugging and unplugging the YubiKey physically on an as-needed basis. If I simply redirect the USB device through the virt-manager GUI, my experience is that it has at best worked very much unreliably, and often not at all. Searching the web hasn't helped. Does anyone have a recipe for that to work _reliably_? -- Michael Kjörling 🔗 https://michael.kjorling.se “Remember when, on the Internet, nobody cared that you were a dog?”

3 4

Clocks and Timers
by Simon Fairweather 05 Nov '23

05 Nov '23

Hi, If I have the following XML section does this imply that presence is default of on for rtc and pit? <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> Are there any other reference guides to best setup of timers apart from the XML document for different OS types? Regards Simon.

1 0

Re: hdd kills vm
by daggs 04 Nov '23

04 Nov '23

> Sent: Thursday, October 26, 2023 at 9:50 AM > From: "Martin Kletzander" <mkletzan(a)redhat.com> > To: "daggs" <daggs(a)gmx.com> > Cc: libvir-list(a)redhat.com > Subject: Re: hdd kills vm > > On Wed, Oct 25, 2023 at 03:06:55PM +0200, daggs wrote: > >> Sent: Tuesday, October 24, 2023 at 5:28 PM > >> From: "Martin Kletzander" <mkletzan(a)redhat.com> > >> To: "daggs" <daggs(a)gmx.com> > >> Cc: libvir-list(a)redhat.com > >> Subject: Re: hdd kills vm > >> > >> On Mon, Oct 23, 2023 at 04:59:08PM +0200, daggs wrote: > >> >Greetings Martin, > >> > > >> >> Sent: Sunday, October 22, 2023 at 12:37 PM > >> >> From: "Martin Kletzander" <mkletzan(a)redhat.com> > >> >> To: "daggs" <daggs(a)gmx.com> > >> >> Cc: libvir-list(a)redhat.com > >> >> Subject: Re: hdd kills vm > >> >> > >> >> On Fri, Oct 20, 2023 at 02:42:38PM +0200, daggs wrote: > >> >> >Greetings, > >> >> > > >> >> >I have a windows 11 vm running on my Gentoo using libvirt (9.8.0) + qemu (8.1.2), I'm passing almost all available resources to the vm > >> >> >(all 16 cpus, 31 out of 32 GB, nVidia gpu is pt), but the performance is not good, system lags, takes long time to boot. > >> >> > >> >> There are couple of things that stand out to me in your setup and I'll > >> >> assume the host has one NUMA node with 8 cores, each with 2 threads as, > >> >> just like you set it up in the guest XML. > >> >thats correct, see: > >> >$ lscpu | grep -i numa > >> >NUMA node(s): 1 > >> >NUMA node0 CPU(s): 0-15 > >> > > >> >however: > >> >$ dmesg | grep -i numa > >> >[ 0.003783] No NUMA configuration found > >> > > >> >can that be the reason? > >> > > >> > >> no, this is fine, 1 NUMA node is not a NUMA, technically, so that's > >> perfectly fine. > >thanks for clarifying it for me > > > >> > >> >> > >> >> * When you give the guest all the CPUs the host has there is nothing > >> >> left to run the host tasks. You might think that there "isn't > >> >> anything running", but there is, if only your init system, the kernel > >> >> and the QEMU which is emulating the guest. This is definitely one of > >> >> the bottlenecks. > >> >I've tried with 12 out of 16, same behavior. > >> > > >> >> > >> >> * The pinning of vCPUs to CPUs is half-suspicious. If you are trying to > >> >> make vCPU 0 and 1 be threads on the same core and on the host the > >> >> threads are represented as CPUs 0 and 8, then that's fine. If that is > >> >> just copy-pasted from somewhere, then it might not reflect the current > >> >> situation and can be source of many scheduling issues (even once the > >> >> above is dealt with). > >> >I found a site that does it for you, if it is wrong, can you point me to a place I can read about it? > >> > > >> > >> Just check what the topology is on the host and try to match it with the > >> guest one. If in doubt, then try it without the pinning. > >I can try to play with it, what I don't know is what should be the mapping logic? > > > > Threads on the same core in the guest should map to threads on the same > core in the host. Since there is no NUMA that should be enough to get > the best performance. But even misconfiguration of this will not > introduce lags in the system if it has 8 CPUs. So that's definitely not > the root cause of the main problem, it just might be suboptimal. > > >> > >> >> > >> >> * I also seem to recall that Windows had some issues with systems that > >> >> have too many cores. I'm not sure whether that was an issue with an > >> >> edition difference or just with some older versions, or if it just did > >> >> not show up in the task manager, but there was something that was > >> >> fixed by using either more sockets or cores in the topology. This is > >> >> probably not the issue for you though. > >> >> > >> >> >after trying a few ways to fix it, I've concluded that the issue might be related to the why the hdd is defined at the vm level. > >> >> >here is the xml: https://bpa.st/MYTA > >> >> >I assume that the hdd sits on the sata ctrl causing the issue but I'm not sure what is the proper way to fix it, any ideas? > >> >> > > >> >> > >> >> It looks like your disk is on SATA, but I don't see why that would be an > >> >> issue. Passing the block device to QEMU as VirtIO shouldn't cause that > >> >> much of a difference. Try measuring the speed of the disk on the host > >> >> and then in the VM maybe. Is that SSD or NVMe? I presume that's not > >> >> spinning rust, is it. > >> >as seen, I have 3 drives, 2 cdroms as sata and one hdd pt as virtio, I read somewhere that if the controller of the virtio > >> >device is sata, than it doesn't uses the virtio optimally. > >> > >> Well it _might_ be slightly more beneficial to use virtio-scsi or even > >> <disk type='block' device='lun'>, but I can't imagine that would make > >> the system lag. I'm not that familiar with the details. > >configure virtio-scsi and sata-scai at the same time? > > > > Yes, forgot that, sorry. Try virtio-scsi. You could also go farther > and pass through the LUN or the whole HBA (if you don't need to access > any other disk on it) to the VM. Try the information presented here: > > https://libvirt.org/formatdomain.html#usb-pci-scsi-devices > > >> > >> >it is a spindle, nvmes are too expensive where I live, frankly, I don't need lightning fast boot, the other BM machines running windows on spindle > >> >run it quite fast and they aren't half as fast as this server > >> > > >> > >> That might actually be related. The guest might think it is a different > >> type of disk and use completely suboptimal scheduling. This might > >> actually be solved by passing it as <disk device='lun'..., but at this > >> point I'm just guessing. > >I'll look into that, thanks. so bottom line, you suggest the following: 1. remove the manual cpu pin, let qemu sort that out. 2. add a virtio scsi controller and connect the os hdd to it 3. pass the hss via scsi pt and not dev node 4. if I able to do #3, no need to add device='lun' as it won't use the disk option Dagg.

2 9

ANNOUNCE: Mailing list move complete
by Daniel P. Berrangé 01 Nov '23

01 Nov '23

This is an announcement to the effect that the mailing list move is now complete. TL;DR the new list addresses are: * announce(a)lists.libvirt.org (formerly libvirt-announce(a)redhat.com) Low volume, announcements of releases and other important info * users(a)lists.libvirt.org (formerly libvirt-users(a)redhat.com) End user questions and discussions and collaboration * devel(a)lists.libvirt.org (formerly libvir-list(a)redhat.com) Patch submission for development of main project * security(a)lists.libvirt.org (formerly libvir-security(a)redhat.com) Submission of security sensitive bug reports The online archive and membership mgmt interface is https://lists.libvirt.org In my original announcement[1] I mentioned that people would need to manually re-subscribe. Due to a mixup in communications, our IT admins went ahead and migrated across the existing entire subscriber base for all lists. Thus there is NO need to re-subscribe to any of the lists. If you were doing filtering of mail, you may need to update filters for the new list ID matches. With the new list server, HyperKitty is providing the web interface. Thus if you wish to interact with the lists entire via the browser this is now possible. Note that it requires you to register for an account and set a password, even if you are already a list subscriber. If you mistakenly send to the old lists you should receive an auto-reply about the moved destinations. Note, we had some technical issues on Thursday/Friday, so if you sent mails on those two days they probably will not have reached any lists, and so you may wish to re-send them. With regards, Daniel [1] https://listman.redhat.com/archives/libvirt-announce/2023-October/000650.ht… -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|

3 4

Activate storage during domain migration
by e-m＠mailbox.org 26 Oct '23

26 Oct '23

Hi, I have a block storage which I only want to be mounted on a single node. I know that there are many possibilities for shared storage usage but I want to know if the following is possible (using the API). - Have a domain running on node-A - Initialize a migration for that domain to node-B - Run a hook or something just before the domain starts on node-B to: - unmount storage on node-A - mount/prepare storage on node-B Thanks and best regards, Etienne

3 2

Libvirt
by Gk Gk 26 Oct '23

26 Oct '23

Hi All, I am trying to collect memory, disk and network stats for a VM on kvm host. It seems that the statistics are not matching what the OS inside the VM is reporting. Why is this discrepancy ? Is this a known bug of libvirt ? Also I heard that libvirt shows cumulative figures for these measures ever since the VM was created. Also I tested by creating a new vm and comparing the stats without a reboot . Even in this case, the stats dont agree. Can someone help me here please ? Thanks Kumar

2 5

help,virsh start vm failed
by 展荣臻（信泰） 26 Oct '23

26 Oct '23

Hello,all I start vm failed as show below: ()[root@com1 tmp]# virsh start centos error: Failed to start domain centos error: Start job for unit machine-qemu\x2d1\x2dcentos.scope failed with 'failed' as the same time error "2021-02-27 08:58:31.688+0000: 22: error : virSystemdCreateMachine:361 : Start job for unit machine-qemu\x2d4\x2dcentos.scope failed with 'failed' " in libvirt.log. How I dig into this question.thanks

1 0

Can't start vm with enc backing files, No secret with id 'sec0' ?
by 18781374080 26 Oct '23

26 Oct '23

Hey, guys I've been working on whether libvirt supports encrypted snapshots,Here are my versions of libvirt and qemu [root@xx ~]# libvirtd -V libvirtd (libvirt) 4.5.0 [root@xx ~]# qemu-img -V qemu-img version 2.12.0 (qemu-kvm-ev-2.12.0-33.1.el7_7.4) Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers 1. assign $MYSECRET to libvirt secret using the secret-define and secret-set-value commands,and $MYSECRET is in base64 format MYSECRET=`printf %s "123456" | base64` 2. created a disk encrypted in luks format qemu-img create --object secret,id=sec0,data=$MYSECRET,format=base64 -f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 enc.qcow220G 3. The encrypted disk is defined in the XML configuration file, as shown below.Then I successfully started the virtual machine. <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/root/enc.qcow2'/> <backingStore/> <target dev='hda' bus='ide'/> <encryption format='luks'> <secret type='passphrase' uuid='694bdf38-214e-48d3-8c4c-9dbbcf0f5fa0'/> </encryption> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> 4. According to the qemu documentation, an encrypted snap.qcow2 disk was created with enc.qcow2 as backing qemu-img create -f qcow2 -F qcow2 --object secret,id=sec0,data=$MYSECRET,format=base64 --object secret,id=sec1,data=$MYSECRET,format=base64 -o encrypt.format=luks,encrypt.key-secret=sec1 -b 'json:{"encrypt.key-secret": "sec0", "driver": "qcow2", "file": {"driver": "file", "filename": "/root/enc/enc.qcow2"}}' snap.qcow2 I used the same $MYSECRET as the password data for the disk. Here is the disk information for snap.qcow2 image: snap.qcow2 file format: qcow2 virtual size: 20G (21474836480 bytes) disk size: 480K encrypted: yes cluster_size: 65536 backing file: json:{"encrypt.key-secret": "sec0", "driver": "qcow2", "file": {"driver": "file", "filename": "/root//enc.qcow2"}} backing file format: qcow2 Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 encrypt: ivgen alg: plain64 hash alg: sha256 cipher alg: aes-256 uuid: ab0e3f87-35e7-40cb-9888-9fe9bb54e981 format: luks cipher mode: xts slots: [0]: active: true iters: 115582 key offset: 4096 stripes: 4000 [1]: active: false key offset: 262144 [2]: active: false key offset: 520192 [3]: active: false key offset: 778240 [4]: active: false key offset: 1036288 [5]: active: false key offset: 1294336 [6]: active: false key offset: 1552384 [7]: active: false key offset: 1810432 payload offset: 2068480 master key iters: 30085 corrupt: false 5. Then I changed the configuration of the XML, as shown below.And re-define and start the virtual machine <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/root/snap.qcow2'/> <backingStore type='file'> <format type='qcow2'/> <source file='/root/enc.qcow2'/> <backingStore/> </backingStore> <target dev='hda' bus='ide'/> <encryption format='luks'> <secret type='passphrase' uuid='694bdf38-214e-48d3-8c4c-9dbbcf0f5fa0'/> </encryption> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> Then the startup failed and an error was thrown. As shown below. qemu-kvm: -drive file=/root/enc/vm/enc-snap.qcow2,encrypt.format=luks,encrypt.key-secret=ide0-0-0-luks-secret0,format=qcow2,if=none,id=drive-ide0-0-0: Could not open backing file: No secret with id 'sec0' The sec0 secret id could not be found in the backing file, this is my problem. Is there a problem with the way I implemented it, or does libvirt currently not support this? Any tips or help will be appreciated, Looking forward to your reply. Thank you | | 18781374080 | | 18781374080(a)163.com | 签名由网易邮箱大师定制

2 2