- Users - libvirt List Archives

any update
by dh8827.kim＠samsung.com 30 Aug '24

30 Aug '24

Has there been any update? Has anyone solved this issue? I am experiencing the same problem. To resolve this, try downgrading the libvirtexport version to tinkoff. ( https://github.com/Tinkoff/libvirt-exporter/blob/master/libvirt_exporter.go )

1 0

autostart sessiioned vms
by daggs 28 Aug '24

28 Aug '24

Greetings, I'm running sessioned vms which I want to start them up at boot. I've marked a vm inside a use as autostart, added libvirtd to the boot order and rebooted but it didn't started the vm. I tried adding libvirt-guests to bott services but my sessioned vm is still not autostarting. what is the proper way to do so? Thanks, Dagg

2 6

KVM image fails to resume
by libvirt＠eyal.emu.id.au 27 Aug '24

27 Aug '24

I upgraded f38->f40 but left the vm saved rather than shutdown (my bad but here we are) Attempting to restore the vm with 'virsh restore /data1/VMs/libvirt/images/e4.saved' I get: error: Failed to restore domain from /data1/VMs/libvirt/images/e4.saved error: operation failed: guest CPU doesn't match specification: extra features: vmx-ins-outs,vmx-true-ctls,vmx-store-lma,vmx-activity-hlt,vmx-vmwrite-vmexit-fields,vmx-apicv-xapic,vmx-ept,vmx-desc-exit,vmx-rdtscp-exit,vmx-vpid,vmx-wbinvd-exit,vmx-unrestricted-guest,vmx-rdrand-exit,vmx-invpcid-exit,vmx-vmfunc,vmx-shadow-vmcs,vmx-rdseed-exit,vmx-pml,vmx-ept-execonly,vmx-page-walk-4,vmx-ept-2mb,vmx-ept-1gb,vmx-invept,vmx-eptad,vmx-invept-single-context,vmx-invept-all-context,vmx-invvpid,vmx-invvpid-single-addr,vmx-invvpid-all-context,vmx-intr-exit,vmx-nmi-exit,vmx-vnmi,vmx-preemption-timer,vmx-vintr-pending,vmx-tsc-offset,vmx-hlt-exit,vmx-invlpg-exit,vmx-mwait-exit,vmx-rdpmc-exit,vmx-rdtsc-exit,vmx-cr3-load-noexit,vmx-cr3-store-noexit,vmx-cr8-load-exit,vmx-cr8-store-exit,vmx-flexpriority,vmx-vnmi-pending,vmx-movdr-exit,vmx-io-exit,vmx-io-bitmap,vmx-mtf,vmx-msr-bitmap,vmx-monitor-exit,vmx-pause-exit,vmx-secondary-ctls,vmx-exit-nosave-debugctl,vmx-exit-load-perf-global-ctrl,vmx-exit-ack-i ntr,vmx-exit-save-pat,vmx-exit-load-pat,vmx-exit-save-efer,vmx-exit-load-efer,vmx-exit-save-preemption-timer,vmx-entry-noload-debugctl,vmx-entry-ia32e-mode,vmx-entry-load-perf-global-ctrl,vmx-entry-load-pat,vmx-entry-load-efer,vmx-eptp-switching Then, trying to resume from the "virtual Machine Manager" UI gets the message: ===== Error unpausing domain: Requested operation is not valid: domain is not running Error unpausing domain: Requested operation is not valid: domain is not running Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 72, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/asyncjob.py", line 108, in tmpcb callback(*args, **kwargs) File "/usr/share/virt-manager/virtManager/object/libvirtobject.py", line 57, in newfn ret = fn(self, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/share/virt-manager/virtManager/object/domain.py", line 1437, in resume self._backend.resume() File "/usr/lib64/python3.12/site-packages/libvirt.py", line 2425, in resume raise libvirtError('virDomainResume() failed') libvirt.libvirtError: Requested operation is not valid: domain is not running I searched for a solution and most say to fiddle with some settings and reboot. I cannot reboot, I want to resume (unpause). How can I restore the vm without crashing it (throwing away the saved memory), if it even boots this way? TIA

2 4

autostart fails on host boot. NAT-bridge doesn't come up fast enough
by Fred Clift 26 Aug '24

26 Aug '24

I have 18 VMs that are all supposed to attach to a NAT-bridge. The bridge definition seems to be ok - it used to work when I didn't have any guests defined. It worked when I had only a couple guests defined. Now that I have 18 of them, it seems to take more than a minute for virbr0 to come up, and the guests all fail to autostart because the bridge doesn't exist yet. The host system (AlmaLinux 9.4) has dual Xeon(R) CPU E5-2680v4 with plenty of cores and ram. Is there some easy way to delay the start of the guests to wait for virbr0 to be up? Or can I specify a boot order? I assume that libvirtd autostarts networks before guests but I really have no idea... Can I specify an autostart dependency? As a stopgap measure I turned 'autostart' off on these and made a systemd-run bash script that just starts the network, and then starts the guests all serially. It has worked 10 or so test boots in a row. I'd prefer not to have to use an external script if possible. Fred Clift

2 3

splitting a bt wifi combo between two vms
by daggs 26 Aug '24

26 Aug '24

Greetings, I have the following combo device: dagg@NCC-5001D ~ $ lsusb -d8087:0029 Bus 001 Device 002: ID 8087:0029 Intel Corp. AX200 Bluetooth dagg@NCC-5001D ~ $ lspci -vv -s 03:00.0 03:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a) Subsystem: Intel Corporation Wi-Fi 6 AX200NGW Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 34 IOMMU group: 13 Region 0: Memory at fc600000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel modules: iwlwifi I want to pass each of them to a different vm. should I expect problems? Thanks, Dagg

3 3

Updating authentication for a Ceph (RBD) disk in a live domain
by will.gorman＠joyent.com 21 Aug '24

21 Aug '24

Is it possible to update and change the <auth/> for an RBD network disk while the domain the disk is attached to is running and without detaching/reattaching the disk? For example if I have a disk attached like the following: <disk type='network' device='disk'> <driver name='qemu' type='raw'/> <auth username='someuser'> <secret type='ceph' usage='someuser key'/> </auth> <source protocol='rbd' name='somepool/someimage'> <host name='127.0.0.1' port='3300'/> </source> <target dev='sdd' bus='scsi'/> <alias name='scsi0-0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> If I want to change the auth to <auth username='someotheruser'> <secret type='ceph' usage='someotheruser key'/> </auth> can I do that without either attaching/detaching the disk or stopping/restarting the domain? I've tried `virsh update-device domain disk.xml --live --persistent` using xml identical to the current disk except for the auth and it says "Device updated successfully" but when I check the domain with `dumpxml` I can still see the original auth settings for the disk.

2 1

cap seach for session libvirt
by daggs 09 Aug '24

09 Aug '24

Greetings, I'm working on allowing a session vm to create a tap iface. the vm has this defintion: <interface type='ethernet'> <mac address='52:54:00:a7:79:6b'/> <target dev='veth0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </interface> when I try to start the vm, I get this error: Unable to create tap device veth0: Operation not permitted searching the code led me to this line: https://github.com/libvirt/libvirt/blob/0caacf47d7b423db9126660fb0382ed56cd… I've looked on line and found out I need the net_admin_cap set. so I took the relevant code in to a dedicated test file and using pam_cap I've defined such cap for the test file, all went well. so I took it back to virsh and defined that cap to virsh but I'm still getting the same issue, see: https://ibb.co/zHggRQZ the os is debian 12 any ideas why I'm still getting this error? Thanks, Dagg

2 4

luks devices and libvirt
by Marc Haber 05 Aug '24

05 Aug '24

Hi, this is an ongoing issue. I don't know whether I ever have addresses this here, but it's still annoying. I am using debian unstable, libvirt 10.5.0, virt-manager 4.1.0, qemu 9.0.2. I work through virt-manager, rarely I use virsh. I regularly configure virtual disks that are located on a luks-encrypted LVM volume. when unlocked, the block devices appears as /dev/mapper/foo and is a symlink to a ../dm-xx node with xx being a random number, ../dm-xx being a regular block device. To facilitate this, I have defined a storage pool with this XML: <pool type="dir"> <name>mapper</name> <uuid></uuid> <capacity unit="bytes">24598757376</capacity> <allocation unit="bytes">0</allocation> <available unit="bytes">24598757376</available> <source> </source> <target> <path>/dev/mapper</path> <permissions> <mode>0755</mode> <owner>0</owner> <group>0</group> </permissions> </target> </pool> This is necessary as the storage type "LVM volume group" now insists on a volume group name, and the DM mappings created by LUKS dont have a volume group name. When I add a disk to a VM from this storage pool, it generates the XML: <disk type="file" device="disk"> <driver name="qemu" type="raw"/> <source file="/dev/mapper/wintest"/> <target dev="vda" bus="virtio"/> <address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/> </disk> qemu won't start with this settings: error: Failed to start domain 'win11test' error: internal error: QEMU unexpectedly closed the monitor (vm='win11test'): 2024-07-28T15:20:25.250387Z qemu-system-x86_64: -blockdev {"driver":"file","filename":"/dev/mapper/wintest","node-name":"libvirt-1-storage","read-only":false}: 'file' driver requires '/dev/mapper/wintest' to be a regular file Changing the XML to <disk type="block" device="disk"> <driver name="qemu" type="raw"/> <source dev="/dev/mapper/wintest"/> <target dev="vda" bus="virtio"/> <address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/> </disk> (note type="block" and "source dev") makes the VM work. Can virt-manager somehow be coaxed into generating XML that works here? If not, is this a virt-manager issue or should qemu just accept type="file" and "source file")? Greetings Marc -- ----------------------------------------------------------------------------- Marc Haber | "I don't trust Computers. They | Mailadresse im Header Leimen, Germany | lose things." Winona Ryder | Fon: *49 6224 1600402 Nordisch by Nature | How to make an American Quilt | Fax: *49 6224 1600421

2 1

setting bridge for VMs IP assignment by router's DHCP server
by Germano Massullo 02 Aug '24

02 Aug '24

I am running a libvirt hostmachine (Fedora 40) which has 192.168.1.6 IP address, assigned by router's DHCP server. I want the libvirt VMs IPs to be assigned by router's DHCP server, so I tried to setup a bridge via # virsh net-define foo.xml and trying the following files as xml file, but they all failed to achieve the task. Here I list the two XML variants I tried to use 1) <network> <name>bridge-no-nat</name> <bridge name='virbr1_no-nat' stp='on' delay='0'/> <forward mode='open'/> </network> RETURNS: open forwarding requested, but no IP address provided for network 'bridge-no-nat' 2) I created in nmtui the bridge virbr1_no_nat then I used following XML for virsh net-define <network> <name>br1_no_nat</name> <forward mode='bridge'/> <bridge name='virbr1_no_nat'/> <virtualport type='openvswitch'/> <portgroup name='default'/> </network> then I configure the VM network to use but when I start the VM I get error: internal error: Unable to add port vnet1 to OVS bridge virbr1_no_nat: <null> Do you know how I can solve this? Thank you

3 2

KVM static internal networking without host bridge interface (virbr)
by Daniel 01 Aug '24

01 Aug '24

How to set up an internal network between two KVM network interfaces while using static networking (avoiding dnsmasq) and while avoiding a host bridge interface (virbr)? Currently I am using this for the network. <network> <name>Internal</name> <bridge name='virbr2' stp='on' delay='0'/> </network> And then for the VM. <interface type='network'> <source network='Internal'/> <model type='virtio'/> <driver name='qemu'/> </interface> * I would like to avoid the host `virbr2` interface. This is because ideally package sniffers on the host such as tshark / wireshark would be unable to see these packages following between an internal network between two VMs. * SLIRP should be avoided due to past security issues. [1] * dnsmasq on the host operating system or inside the VMs should also be avoided in favor of static IP addresses. By comparison, this is possible in VirtualBox. [2] Is that possible with KVM too? Could you please show an example configuration file on how to accomplish that? [1] CVE-2019-6778 [2] VirtualBox has this capability. VirtualBox can have an internal network using static networking. No vibr bridge interfaces can be seen on the host operating system. And VM to VM internal traffic is not visible to package analyzers on the host operating system either. Regards, Daniel -- Daniel Winzen Steinkaulstr. 47 52070 Aachen Germany Web: https://danwin1210.de/ E-Mail: daniel(a)danwin1210.de Phone: +49 176 98819809 PGP-Key: https://danwin1210.de/pgp.txt

2 3