August 2021 - Users - libvirt List Archives

[libvirt-users] [virtual interface] detach interface during boot succeed with no changes
by Yalan Zhang 08 Sep '22

08 Sep '22

Hi guys, when I detach an interface from vm during boot (vm boot not finished), it always fail. I'm not sure if there is an existing bug. I have confirmed with someone that for disk, there is similar behavior, if this is also acceptable? # virsh destroy rhel7.2; virsh start rhel7.2 ;sleep 2; virsh detach-interface rhel7.2 network 52:54:00:98:c4:a0; sleep 2; virsh dumpxml rhel7.2 |grep /interface -B9 Domain rhel7.2 destroyed Domain rhel7.2 started Interface detached successfully <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </controller> <interface type='network'> <mac address='52:54:00:98:c4:a0'/> <source network='default' bridge='virbr0'/> <target dev='vnet0'/> <model type='rtl8139'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> When I detach after the vm boot, expand the sleep time to 10, it will succeed. # virsh destroy rhel7.2; virsh start rhel7.2 ;sleep 10; virsh detach-interface rhel7.2 network 52:54:00:98:c4:a0; sleep 2; virsh dumpxml rhel7.2 |grep /interface -B9 Domain rhel7.2 destroyed Domain rhel7.2 started Interface detached successfully ------- Best Regards, Yalan Zhang IRC: yalzhang Internal phone: 8389413

3 4

a test email (& dmarc) @admins
by lejeczek 10 Dec '21

10 Dec '21

hi guys. I sent email a while ago and I wonder, also having not received a single reply, because I did not get that own email - is there are problem I'm having here or DMARC(yahoo & others?) are not fixed in by this mailing list - would an admin(anybody) know? many thanks, L.

2 4

Need more doc for libvirt-console-proxy
by Guy Godfroy 05 Oct '21

05 Oct '21

Hello, I'm making a web app for my company that will enable different teams to manage their own VMs. I wish to make possible to interact with each VM console, so I plan to use some xterm.js with websockets. So I discovered libvirt-console-proxy [1] when I looked for something to put a libvirt console into a websocket. That seems like the right tool for the job. The only doc I found is this article from 2017 [2]. After trying to understand from this article and from --help, I still have many questions. I am really bad at reading code so I can't even get answers from the sources. My main concern is: How a client is supposed to talk to the proxy? It is said that a security token must be provided. How? HTTP header? Which header? Am I missing something in websocket protocol? I think an example client implementation would help a lot. Also, I tried to use virtconsoleresolveradm to set up metadata on my domains like explained in the article [1] : ./virtconsoleresolveradm enable milou Enabled access to domain 'milou' But that doesn't seem to do anything (except defining the metadata namespace in the XML): virsh metadata milou http://libvirt.org/schemas/console-proxy/1.0 <consoles/> I precise that I have already this in my XML: <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> Should I remove that? Should I edit that? Thanks for your help. Guy Godfroy [1] https://gitlab.com/libvirt/libvirt-console-proxy [2] https://www.berrange.com/posts/2017/01/26/announce-new-libvirt-console-prox…

1 1

Are secrets hidden from admins too - ?
by lejeczek 29 Sep '21

29 Sep '21

Hi guys. On a remote & "shared" systems - are private secrets completely 100% safe? Can root get to those? (naturally excluding hacking of unknown bugs & exploits and theories such as "no computer system is ultimately safe") And if answer is yes then - do you have any best practices for storing & managing of those secrets? many thanks, L.

3 6

one qustion about the snapshot of the libvirt, thanks.
by Guozhonghua 06 Sep '21

06 Sep '21

Hello, When we test snapshot features and review the code of libvirt, there is one question, not an issue. /* do the memory snapshot if necessary */ if (memory) { /* check if migration is possible */ if (!qemuMigrationSrcIsAllowed(driver, vm, false, 0)) goto cleanup; While making one snapshot with memory on one vm, but it is not allowed while the vm which has some src devices, such as pci devs, with which the vm is not allowed to be migrated. I want to known the reason, why should it check this conditions? Thank You!

2 2

We need excellent and well-written documentation for setting up open source NAS software
by Turritopsis Dohrnii Teo En Ming 31 Aug '21

31 Aug '21

Subject: We need excellent and well-written documentation for setting up open source NAS software Good day from Singapore, Our company, which is a Systems Integrator (SI) in Singapore, is evaluating more than 30 different open source Network Attached Storage (NAS) software. We need excellent and well-written documentation for your open source NAS software. Please provide us with links on how to setup your open source NAS software. We are looking forward to your replies. Thank you very much for your kind assistance. Mr. Turritopsis Dohrnii Teo En Ming, 43 years old as of 31 August 2021, is a TARGETED INDIVIDUAL living in Singapore. He is an IT Consultant with a System Integrator (SI)/computer firm in Singapore. He is an IT enthusiast. -----BEGIN EMAIL SIGNATURE----- The Gospel for all Targeted Individuals (TIs): [The New York Times] Microwave Weapons Are Prime Suspect in Ills of U.S. Embassy Workers Link: https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html ******************************************************************************************** Singaporean Targeted Individual Mr. Turritopsis Dohrnii Teo En Ming's Academic Qualifications as at 14 Feb 2019 and refugee seeking attempts at the United Nations Refugee Agency Bangkok (21 Mar 2017), in Taiwan (5 Aug 2019) and Australia (25 Dec 2019 to 9 Jan 2020): [1] https://tdtemcerts.wordpress.com/ [2] https://tdtemcerts.blogspot.sg/ [3] https://www.scribd.com/user/270125049/Teo-En-Ming -----END EMAIL SIGNATURE-----

1 0

issues with vm after upgrade
by daggs 30 Aug '21

30 Aug '21

Greetings, a few weeks ago I've upgraded my system, this resulted with qemu and libvirt being upgraded to 6.0.0 and ~7.5.0 respectfully. I have two vms running on my system, router and streamer. the router vm works great, the streamer vm doesn't. after the streamer vm start, the monitor screen gets black and thats it. no relevant error are found in the log, see: http://dpaste.com/ERWDEJQPC the xml ca be found at https://dpaste.com/FQDN6NTN2 in contrast the following oneliner works: qemu-system-x86_64 \ -machine pc-q35-5.0,accel=kvm,usb=off,smm=on,dump-guest-core=off \ -cpu host,migratable=on \ -m 15360 \ -smp 4,sockets=1,dies=1,cores=2,threads=2 \ -drive file=/home/streamer/streamer.img.qcow2.new,if=virtio,format=qcow2 \ -device vfio-pci,host=0000:00:02.0,romfile=/home/streamer/gpu-8086:5912-uefi.rom,multifunction=on \ -device vfio-pci,host=0000:00:1f.3,multifunction=on \ -usb \ -device usb-host,vendorid=0x046d,productid=0xc52e \ -device usb-host,vendorid=0x2548,productid=0x1002 \ -display none \ -netdev tap,id=hostnet0,ifname=virtsw-streamer,script=no,downscript=no \ -device e1000e,netdev=hostnet0,id=net0,mac=52:54:00:5a:4c:8c \ -blockdev '{"driver":"file","filename":"/usr/share/edk2-ovmf/OVMF_CODE.secboot.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"driver":"file","filename":"/var/lib/libvirt/qemu/nvram/streamer-vm-q35_VARS.fd","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' another issue encountered caused by this param: "-audiodev id=audio1,driver=none" which is auto added to the qemu line. if I add the line to the above oneliner, the guest doesn't detects the pt sound card. without it it does and it works. help on solving both issues will be appreciated. Thanks, Dagg

5 30

Question The order of the output of virsh guestinfo --filesystem
by liuyd.fnst＠fujitsu.com 24 Aug '21

24 Aug '21

Hi all. I'm curious about the output order of virsh guestinfo --filesystem. Is the output random? E.g Guest info ``` [root@localhost ~]# lsblk -Jp -o KNAME,FSTYPE,TYPE,MOUNTPOINT,PKNAME,SERIAL { "blockdevices": [ {"kname": "/dev/sr0", "fstype": null, "type": "rom", "mountpoint": null, "pkname": null, "serial": "drive-scsi0-0-0-0"}, {"kname": "/dev/vda", "fstype": null, "type": "disk", "mountpoint": null, "pkname": null, "serial": null}, {"kname": "/dev/vda1", "fstype": "vfat", "type": "part", "mountpoint": "/boot/efi", "pkname": "/dev/vda", "serial": null}, {"kname": "/dev/vda2", "fstype": "xfs", "type": "part", "mountpoint": "/boot", "pkname": "/dev/vda", "serial": null}, {"kname": "/dev/vda3", "fstype": "LVM2_member", "type": "part", "mountpoint": null, "pkname": "/dev/vda", "serial": null}, {"kname": "/dev/vdb", "fstype": null, "type": "disk", "mountpoint": null, "pkname": null, "serial": null}, {"kname": "/dev/vdb1", "fstype": "xfs", "type": "part", "mountpoint": "/mnt/test1", "pkname": "/dev/vdb", "serial": null}, {"kname": "/dev/vdb2", "fstype": "xfs", "type": "part", "mountpoint": "/mnt/test2", "pkname": "/dev/vdb", "serial": null}, {"kname": "/dev/vdb3", "fstype": "xfs", "type": "part", "mountpoint": "/mnt/test3", "pkname": "/dev/vdb", "serial": null}, {"kname": "/dev/dm-0", "fstype": "xfs", "type": "lvm", "mountpoint": "/", "pkname": "/dev/vda3", "serial": null}, {"kname": "/dev/dm-1", "fstype": "swap", "type": "lvm", "mountpoint": "[SWAP]", "pkname": "/dev/vda3", "serial": null} ] } ``` virsh guestinfo output. It is not sorted by name or total-bytes/used-bytes ``` [root@hpe-apollo80-01-n00 ~]# virsh guestinfo fj-kvm-vm --filesystem fs.count : 6 fs.0.name : dm-0 fs.0.mountpoint : / fs.0.fstype : xfs fs.0.total-bytes : 7946108928 fs.0.used-bytes : 3202314240 fs.0.disk.count : 1 fs.0.disk.0.alias : vda fs.0.disk.0.device : /dev/vda3 fs.1.name : vda2 fs.1.mountpoint : /boot fs.1.fstype : xfs fs.1.total-bytes : 1063256064 fs.1.used-bytes : 180252672 fs.1.disk.count : 1 fs.1.disk.0.alias : vda fs.1.disk.0.device : /dev/vda2 fs.2.name : vda1 fs.2.mountpoint : /boot/efi fs.2.fstype : vfat fs.2.total-bytes : 627900416 fs.2.used-bytes : 7065600 fs.2.disk.count : 1 fs.2.disk.0.alias : vda fs.2.disk.0.device : /dev/vda1 fs.3.name : vdb2 fs.3.mountpoint : /mnt/test2 fs.3.fstype : xfs fs.3.total-bytes : 204111872 fs.3.used-bytes : 12185600 fs.3.disk.count : 1 fs.3.disk.0.alias : vdb fs.3.disk.0.device : /dev/vdb2 fs.4.name : vdb3 fs.4.mountpoint : /mnt/test3 fs.4.fstype : xfs fs.4.total-bytes : 751706112 fs.4.used-bytes : 39084032 fs.4.disk.count : 1 fs.4.disk.0.alias : vdb fs.4.disk.0.device : /dev/vdb3 fs.5.name : vdb1 fs.5.mountpoint : /mnt/test1 fs.5.fstype : xfs fs.5.total-bytes : 99254272 fs.5.used-bytes : 6213632 fs.5.disk.count : 1 fs.5.disk.0.alias : vdb fs.5.disk.0.device : /dev/vdb1 ``` -- Best Regards. Yiding Liu

2 2

vmware ESXi in KVM
by Gunnar 11 Aug '21

11 Aug '21

I am trying to install esxi7 inside a KVM machine virt-install --name=esxi7 \ --vcpus=2 \ --memory=4096 \ --cdrom=/home/username/isos/VMware-VMvisor-Installer-7.0U2a-17867351.x86_64.iso \ --disk size=33 \ --os-variant=unknown the installation process starts but does not get fails with a "No network adapters" error. This does not happen with other VM's. What do I have to add to above command in order to attach the default network adapter to the machine? or is there any other trick I have to be aware of when it comes to installing ESXi thx ... Gunnar

3 2

RX throttling causes keep-alive timeout
by Ivan Teterevkov 05 Aug '21

05 Aug '21

Hello folks, I recently discovered that the max_client_requests configuration option affects the keep-alive RPC and can cause the connection timeout, and I wanted to verify if my understanding is correct. Let me outline the context. Under certain circumstances, one of the connected clients in my setup issued multiple concurrent long-standing live-migration requests and reached the default limit of five concurrent requests. Consequently, it triggered the RX throttling, so the server stopped reading the incoming data from this client's file descriptor. Meanwhile, the server issued the keepalive "ping" requests but ignored the "pong" responses from the client due to the RX throttling. As a result, the server concluded the client was dead and closed the connection with the "connection closed due to keepalive timeout" message after the default five "ping" attempts with five seconds timeout each. The idea of throttling makes perfect sense: the server prevents hogging of the worker thread pool (or would prevent the unbounded growth of the memory footprint if the libvirtd server continued parsing the incoming data and queued the requests). What concerns me is that the server drops the connection for the alive clients when they're throttled. One approach to this problem is implementing the EAGAIN-like handling: parse the incoming data above the limit and respond with the error response, but handle the keep-alive RPCs gracefully. However, I see two problems here: either it's a backwards-compatibility concern if implemented unconditionally or polluting the configuration space if implemented conditionally. What is the community's opinion on the above issue? Kind regards, Ivan

2 2

ERROR Couldn't find hvm kernel for Ubuntu tree.
by Kaushal Shriyan 05 Aug '21

05 Aug '21

Hi, I am running the below command to spawn Ubuntu 18.04 based Virtual Machine using KVM based technology. #virt-install --version 1.5.0 # virt-install --name=snipeitassetmanagement > --file=/linuxkvmguestosdisk/snipeitassetmanagement.img --file-size=40 > --nonsparse --vcpus=2 --ram=8096 --network=bridge:br0 --os-type=linux > --os-variant=ubuntu18.04 --graphics none > --location=/linuxkvmguestosdisk/var/lib/libvirt/isos/ubuntu-18.04.5-live-server-amd64.iso > --extra-args="console=ttyS0" > > Starting install... > Retrieving file .treeinfo... > > | 0 B 00:00:00 > Retrieving file content... > > | 0 B 00:00:00 > Retrieving file info... > > | 70 B 00:00:00 > ERROR Couldn't find hvm kernel for Ubuntu tree. > Domain installation does not appear to have been successful. > If it was, you can restart your domain by running: > virsh --connect qemu:///system start snipeitassetmanagement > otherwise, please restart your installation. > > Any clue and i look forward to hearing from you. Thanks in advance. Best Regards,

2 3

Usage of virsh commands on guest lxc container are failing
by Yuva Raj 05 Aug '21

05 Aug '21

Hi Team, I am new to the Qemu/KVM, libvirt and these technologies. Hypervisor is running on linux kernel with libvirtd version 1.3.2. I am trying to spawn LXC ubuntu(21.04) container using virsh -c lxc:// commands on the hypervisor and ubuntu container is running now. On the ubuntu 21.04 container, I have installed debian "libvirt-clients" package to use the virsh utility. Updated the /etc/libvirt/libvirt.conf with to the hypervisor Qemu URI. When I run virsh commands without URI, observing below error root@host:~# virsh list error: failed to connect to the hypervisor error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory root@host:~# virsh -c <Qemu URI> list Id Name State ------------------------- 2 VM running If I execute the virsh commands without "-c" option, then ubuntu 21.04 container would display the VM's running as same as hypervisor. Could you please help to manage this on the LXC ubuntu container? LIBVIRT xml used to spawn LXC ubuntu 21.04 container: <domain type='lxc'> <name>host</name> <uuid>096f46bf-80bb-4441-a512-043a9c7a64d4</uuid> <memory unit='KiB'>1048576</memory> <currentMemory unit='KiB'>1048576</currentMemory> <vcpu placement='static' cpuset='7'>1</vcpu> <os> <type arch='x86_64'>exe</type> <init>/sbin/init</init> </os> <features> <capabilities policy='allow'> <audit_control state='on'/> <audit_write state='on'/> <block_suspend state='on'/> <chown state='on'/> <ipc_lock state='on'/> <ipc_owner state='on'/> <kill state='on'/> <mac_admin state='on'/> <mac_override state='on'/> <mknod state='on'/> <net_admin state='on'/> <net_bind_service state='on'/> <net_broadcast state='on'/> <net_raw state='on'/> <sys_admin state='on'/> <sys_boot state='on'/> <sys_ptrace state='on'/> <sys_rawio state='on'/> <sys_resource state='on'/> <sys_time state='on'/> <syslog state='on'/> </capabilities> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/lib64/libvirt/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='/junos/lxc/jdm/jdm1/rootfs'/> <target dir='/'/> </filesystem> </devices> </domain> Thanks, Yuvaraj.

2 1

attach a pcie root port as hostdev
by Jiatong Shen 04 Aug '21

04 Aug '21

Hello community, I am working on plugging a xilinx fpga card as a hostdev. This fpga card has 2 functions, each has a different role, for some reason, I would like to attach both of them but do not want to attach them separately, so I have tried to attach a pci bridge where fpga cards connect to. but got the following error, error: Failed to attach device from bridge.xml error: internal error: Non-endpoint PCI devices cannot be assigned to guests so, my question is is it possible to attach a pci-bridge as hostdev? thank you. -- Best Regards, Jiatong Shen

2 2

Sharing dhcp leases between multiple host systems
by Michael Ablassmeier 04 Aug '21

04 Aug '21

hi, assume i have multiple host systems which spin up virtual machines using the vagrant/vagrant-libvirt provider. Both host systems have a defined network (which has the same name on both hosts) which the first network interface of the virtual machine is assigned to. During boot of the virtual machine, the first network device is configured via DHCP and vagrant uses the mac address table or libvirt dhcp leases table to find out about the IP address that was assigned to the virtual machine: From that point on, i can reach the virtual machine locally on the host system. This works nicely if the network is a libvirt NAT network, as the IP addresses are unique on both host systems. Now i want to change the situation and provide routed addresses, thus i want to make sure that an IP that is assigned for a virtual machine on host A is not re-used on host B to not have IP address conflicts. What im searching for is the "libvirt" way to have a central lease file between multiple hosts for the same network (without having another layer like OVS/OVN). What i guess would work is: 1) share /var/lib/libvirt/dnsmasq between both host systems, of course means the virtual bridge for the network has to have the same name on both systems. 2) replace /usr/libexec/libvirt_leaseshelper with my own version, that stores the leases in an central place. 3) a way that exists and i dont know about? Option 2) sounds the best for me, but i currently dont see a way to specify the dhcp-script used for a network on libvirt side .. any opinions on this? Using libvirt 7.x and alike from the centos 8 advanced virtualization stream. thanks, - michael

2 1

Disk extend during migration
by Vojtech Juranek 02 Aug '21

02 Aug '21

Hi, as a follow-up of BZ #1883399 [1], we are reviewing vdsm VM migration flows and solve few follow-up bugs, e.g. BZ #1981079 [2]. I have couple of questions related to libvirt: * if we run disk extend during migration, it can happen that migration finishes sooner than disk extend. In such case we will try to set disk threshold on already stopped VM (we handle libvirt event that VM was stopper, but due to Python GIL there can be a delay between obtaining appropriate signal from libvirt and handling it). In such case we get libvirt VIR_ERR_OPERATION_INVALID when setting disk threshold. Is it safe to catch this exception and ignore it or it's thrown for various reasons and the root cause can be something else than stopped VM? * after disk extend, we resume VM if it's stopped (usually due to running out of the disk space). Is it safe to do so also when we do the disk extend during migration and VM can be stopped because it was already migrated? I.e. can we assume that libvirt will handle such situation and won't resume VM in such case? We do some checks before resume and try to avoid situation when we resume migrated VM, but there can be some corner cases and it would be useful to know if we can rely in libvirt to prevent resuming VM in unwanted cases like one when VM is stopper after migration. Thanks Vojta [1] https://bugzilla.redhat.com/1883399 [2] https://bugzilla.redhat.com/1981079

2 4