July 2019 - Users - libvirt List Archives

[libvirt-users] [virtual interface] detach interface during boot succeed with no changes
by Yalan Zhang 08 Sep '22

08 Sep '22

Hi guys, when I detach an interface from vm during boot (vm boot not finished), it always fail. I'm not sure if there is an existing bug. I have confirmed with someone that for disk, there is similar behavior, if this is also acceptable? # virsh destroy rhel7.2; virsh start rhel7.2 ;sleep 2; virsh detach-interface rhel7.2 network 52:54:00:98:c4:a0; sleep 2; virsh dumpxml rhel7.2 |grep /interface -B9 Domain rhel7.2 destroyed Domain rhel7.2 started Interface detached successfully <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </controller> <interface type='network'> <mac address='52:54:00:98:c4:a0'/> <source network='default' bridge='virbr0'/> <target dev='vnet0'/> <model type='rtl8139'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> When I detach after the vm boot, expand the sleep time to 10, it will succeed. # virsh destroy rhel7.2; virsh start rhel7.2 ;sleep 10; virsh detach-interface rhel7.2 network 52:54:00:98:c4:a0; sleep 2; virsh dumpxml rhel7.2 |grep /interface -B9 Domain rhel7.2 destroyed Domain rhel7.2 started Interface detached successfully ------- Best Regards, Yalan Zhang IRC: yalzhang Internal phone: 8389413

3 4

[libvirt-users] Add Virtlyst to the list of libvirt users
by Daniel Nicoletti 24 Sep '20

24 Sep '20

Hi, I've just released v1.0.0 of Virtlyst[1] a web tool to manage VMs using Qt/C++/Cutelyst https://dantti.wordpress.com/2018/04/19/announcing-virtlyst-a-web-interface… Thanks. 1 - https://github.com/cutelyst/Virtlyst -- Daniel Nicoletti KDE Developer - http://dantti.wordpress.com

4 5

[libvirt-users] Question about disabling UFO on guest
by Bao Nguyen 05 Aug '20

05 Aug '20

Hello everyone, I would like to ask a question regarding to disable UFO of virtio vNIC in my guest. I have read the document at https://libvirt.org/formatdomain.html *host* The csum, gso, tso4, tso6, ecn and ufo attributes with possible values on and off can be used to turn off host offloading options. By default, the supported offloads are enabled by QEMU. *Since 1.2.9 (QEMU only)* The mrg_rxbuf attribute can be used to control mergeable rx buffers on the host side. Possible values are on (default) and off. *Since 1.2.13 (QEMU only)* *guest* The csum, tso4, tso6, ecn and ufo attributes with possible values on and off can be used to turn off guest offloading options. By default, the supported offloads are enabl ed by QEMU. *Since 1.2.9 (QEMU only)* Then I disabled UFO on my vNIC on guest as the following configuration <devices> <interface type='network'> <source network='default'/> <target dev='vnet1'/> <model type='virtio'/> <driver name='vhost' txmode='iothread' ioeventfd='on' event_idx='off' queues='5' rx_queue_size='256' tx_queue_size='256'> *<host gso='off' ufo='off' />* *<guest ufo='off'/>* </driver> </interface> </devices> Then I reboot my node to get the change effect and it works. However, can I disable the UFO without touching the host OS? or it always has to disable on both host and guest like that? Thanks, Brs, Natsu

2 1

[libvirt-users] OVS / KVM / libvirt / MTU
by Sven Vogel 09 Aug '19

09 Aug '19

Hey there, I hope anyone can bring some light in the following problem. <interface type='bridge'> <source bridge='cloudbr0'/> <mtu size='2000'/> <mac address='02:00:74:76:00:01'/> <model type='virtio'/> <virtualport type='openvswitch'> </virtualport> <vlan trunk='no'> <tag id='2097'/> </vlan><link state='up'/> </interface> we have an base bridge for example and cloudbr0. After we add an mtu to the vm bridge here it seems the base bridge gets the same mtu like the vnet adapter. Is this normal behaviour of libvirt together with OVS? —ovs-vsctl show 5b154321-534d-413e-9761-60476ae06640 Bridge "cloudbr0" Port "cloudbr0" Interface "cloudbr0" type: internal —MTU from the bridge after set an MTU into the XML File (before we had here 9000) mtu : 2000 mtu_request : [] name : "cloudbr0" ofport : 65534 —MTU of the vnet interface mac_in_use : "fe:00:74:76:00:01" mtu : 1450 mtu_request : 1450 name : „vnet2" Thanks for help… __ Sven Vogel Teamlead Platform EWERK RZ GmbH Brühl 24, D-04109 Leipzig P +49 341 42649 - 11 F +49 341 42649 - 18 S.Vogel(a)ewerk.com www.ewerk.com Geschäftsführer: Dr. Erik Wende, Hendrik Schubert, Frank Richter Registergericht: Leipzig HRB 17023 Zertifiziert nach: ISO/IEC 27001:2013 DIN EN ISO 9001:2015 DIN ISO/IEC 20000-1:2011 EWERK-Blog | LinkedIn | Xing | Twitter | Facebook Auskünfte und Angebote per Mail sind freibleibend und unverbindlich. Disclaimer Privacy: Der Inhalt dieser E-Mail (einschließlich etwaiger beigefügter Dateien) ist vertraulich und nur für den Empfänger bestimmt. Sollten Sie nicht der bestimmungsgemäße Empfänger sein, ist Ihnen jegliche Offenlegung, Vervielfältigung, Weitergabe oder Nutzung des Inhalts untersagt. Bitte informieren Sie in diesem Fall unverzüglich den Absender und löschen Sie die E-Mail (einschließlich etwaiger beigefügter Dateien) von Ihrem System. Vielen Dank. The contents of this e-mail (including any attachments) are confidential and may be legally privileged. If you are not the intended recipient of this e-mail, any disclosure, copying, distribution or use of its contents is strictly prohibited, and you should please notify the sender immediately and then delete it (including any attachments) from your system. Thank you.

4 7

[libvirt-users] Researching why different cache modes result in 'some' guest filesystem corruption..
by vincent＠cojot.name 02 Aug '19

02 Aug '19

Hi All, I've been chasing down an issue in recent weeks (my own lab, so no prod here) and I'm reaching out in case someone might have some guidance to share. I'm running fairly large VMs (RHOSP underclouds - 8vcpu, 32gb ram, about 200gb single disk as a growable qcow2) on some RHEL7.6 hypervisors (kernel 3.10.0-927.2x.y, libvirt 4.5.0, qemu-kvm-1.5.3) on top of SSD/NVMe drives with various filesystems (vxfs, zfs, etc..) and using ECC RAM. The issue can be described as follows: - the guest VMs work fine for a while (days, weeks) but after a kernel update (z-stream) comes in, I am often greeted by the following message immediately after rebooting (or attempting to reboot into the new kernel): "error: not a correct xfs inode" - booting the previous kernel works fine and re-generating the initramfs for the new kernel (from the n-1 kernel) does not solve anything. - if booted from an ISO, xfs_repair does not find errors. - on ext4, there seems to be some kind of corruption there too. I'm building the initial guest image qcow2 for those guest VMs this way: 1) start with a rhel-guest image (currently rhel-server-7.6-update-5-x86_64-kvm.qcow2) 2) convert to LVM by doing this: qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=1048576,lazy_refcounts=off final_guest.qcow2 512G virt-format -a final_guest.qcow2 --partition=mbr --lvm=/dev/rootdg/lv_root --filesystem=xfs guestfish --ro -a rhel_guest.qcow2 -m /dev/sda1 -- tar-out / - | \ guestfish --rw -a final_guest.qcow2 -m /dev/rootdg/lv_root -- tar-in - / 3) use "final_guest.qcow2" as the basis for my guests with LVM. After chasing down this issue some more and attempting various things (build the image on Fedora29, build a real XFS filesystem inside a VM and use the generated qcow2 as a basis instead of virt-format).. ..I've noticed that the SATA disk of each of those guests were using 'directsync' (instead of 'Hypervisor Default'). As soon as I switched to 'None', the XFS issues disappeared and I've now applied several consecutive kernel updates without issues. Also, 'directsync' or 'writethrough', while providing decent performance, both exhibited the XFS 'corruption' behaviour.. Only 'none' seem to have solved that. I've read the docs but I thought it was OK to use those modes (UPS, Battery-Backed RAID, etc..) Does anyone have any idea what's going on or what I may be doing wrong? Thanks for reading, Vincent

2 1

[libvirt-users] Why librbd disallow VM live migration if the disk cache mode is not none or directsync
by Ming-Hung Tsai 01 Aug '19

01 Aug '19

I'm curious that why librbd sets this limitation? The rule first appeared in librbd.git commit d57485f73ab. Theoretically, a write-through cache is also safe for VM migration, if the cache implementation guarantees that cache invalidation and disk write are synchronous operations. For example, I'm using Ceph RBD images as VM storage backend. The Ceph librbd supports synchronous write-through cache, by setting rbd_cache_max_dirty to zero, and setting rbd_cache_block_writes_upfront to true, thus it would be safe for VM migration. Is that true? Any suggestion would be appreciated. Thanks. Ming-Hung Tsai

2 3

[libvirt-users] Libvirt Virtualization Problem
by 王金磊 30 Jul '19

30 Jul '19

Dear Sir/Madam: I use virt-manager to create a new virtual machine(it's name is generic), then I edit generic to set it's cpu_mode as 'host-model', and I start it, but when dumpxml generic, it's cpu_mode is changed as 'custom'. I want to know that why it is? And what's the principle of dumpxml? Thanks! A user of libvirt

2 1

[libvirt-users] virsh command to list CPU,Memory and Storage
by Kaushal Shriyan 30 Jul '19

30 Jul '19

Hi, Is there a way to find out total CPU's, Memory and Storage using virsh command? For example virsh list --all list out all VM's 11 dockerregistry01 running 12 gitlab running Any help will be highly appreciated. Thanks in Advance. Best Regards, Kaushal

3 2

[libvirt-users] <VM LIVE Migration> <Sync conntrack entries>
by bharath paulraj 26 Jul '19

26 Jul '19

Hi Team, I am using QEMU/KVM for launching VMs and libvirt to govern those VMs. I would like to synchronise the connection tracking entries specific to the VM during the VM LIVE migrations. It is required when the firewall is implemented at the host level like libvirt's "network filters". If stateful firewall is enabled, then unless these connection tracking entries are synchronised, all the connections to the VM are lost and all TCP connections should be reestablished. Is there any option already available? I don't think current libvirt hooks are helpful, as VM pause in the source hypervisor and VM on in the destination hypervisor is done by QEMU and it does not wait for any application that needs to sync-up some metadata — In my case, it is conntrack entries. Also I tried with the existing hooks - stop, release, startcpus and nothing worked well. Has anybody came across similar scenario? If yes, how you overcome this? -- Regards, Bharath

2 1

[libvirt-users] Define libvirt network portgroup with native untagged.
by Tanmoy Sinha 26 Jul '19

26 Jul '19

Hi, I have created a libvirt network on top of a OVS bridge (named vlan-br) which receives all VLAN tagged packets, i.e. connected to a trunk port. The definition xml is below. What I want to achieve in the portgroup definition 'trunk-native-1221' is to allow 1221 as untagged/native but rest all VLAN as tagged. The following portgroup definition works, but I don't want to enumerate all the tagged VLANs in the portgroup definition. I understand what libvirt does on the underlying OVS bridge, once a guest interface (say vNetX) is attached to the portgroup is to set the vnetX with tag=1221 and vlan_mode= native-untagged and it sets trunk = [1222,1221,1223,1224]. Now if I go and clear the trunk setting on the OVS bridge for that interface I am able to see both tagged and untagged (1221) packets on the guest. This is exactly what I want to achieve in the libvirt network definition, i.e. have one untagged VLAN and* allow all other VLANs without having to enumerate them in the portgroup definition, as that is hard to maintain. * <network> <name>kvm-core-net</name> <bridge name = 'vlan-br'/> <forward mode = 'bridge'/> <virtualport type='openvswitch'/> ....... <portgroup name='*trunk-native-1221*'> <vlan trunk='yes'> <tag id='1222'/> <tag id='1221' nativeMode='untagged'/> <tag id='1223'/> <tag id='1224'/> </vlan> </portgtroup> ..... </network> Regards Tanmoy Sinha

1 0

[libvirt-users] make install libvirt v5.5.0 failed
by netsurfed 24 Jul '19

24 Jul '19

Hi all: Unable to install libvirt v5.5.0 correctly through the source code which clone from git. The error message is shown below. libtool: install: (cd /home/libvirt/src; /bin/sh /home/libvirt/libtool --silent --tag CC --mode=relink gcc -std=gnu99 -I/usr/include/libxml2 -fno-common -W -Waddress -Waggressive-loop-optimizations -Wall -Wattributes -Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wclobbered -Wcomment -Wcomments -Wcoverage-mismatch -Wcpp -Wdeprecated-declarations -Wdiv-by-zero -Wdouble-promotion -Wempty-body -Wendif-labels -Wextra -Wformat-contains-nul -Wformat-extra-args -Wformat-security -Wformat-y2k -Wformat-zero-length -Wfree-nonheap-object -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast -Winvalid-memory-model -Winvalid-pch -Wlogical-op -Wmain -Wmaybe-uninitialized -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-include-dirs -Wmissing-parameter-type -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wold-style-declaration -Wold-style-definition -Woverflow -Woverride-init -Wpacked-bitfield-compat -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wpragmas -Wpsabi -Wreturn-local-addr -Wreturn-type -Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wsuggest-attribute=const -Wsuggest-attribute=format -Wsuggest-attribute=noreturn -Wsuggest-attribute=pure -Wswitch -Wsync-nand -Wtrampolines -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-but-set-parameter -Wunused-but-set-variable -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvarargs -Wvariadic-macros -Wvector-operation-performance -Wvolatile-register-var -Wwrite-strings -Wnormalized=nfc -Wno-sign-compare -Wjump-misses-init -Wswitch-enum -Wno-format-nonliteral -fstack-protector-strong -fexceptions -fasynchronous-unwind-tables -fipa-pure-const -Wno-suggest-attribute=pure -Wno-suggest-attribute=const -Werror -Wframe-larger-than=4096 -g -O2 -module -avoid-version -Wl,-z -Wl,nodelete -export-dynamic -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--no-copy-dt-needed-entries -Wl,-z -Wl,defs -o libvirt_driver_vbox.la -rpath /usr/lib/libvirt/connection-driver libvirt_driver_vbox_impl.la libvirt.la ../gnulib/lib/libgnu.la -ldl ) ./.libs/libvirt_driver_vbox_impl.a(libvirt_driver_vbox_impl_la-vbox_common.o): In function `vboxAttachDrives': /home/libvirt/src/vbox/vbox_common.c:1124: undefined reference to `virDomainDeviceFindSCSIController' ./.libs/libvirt_driver_vbox_impl.a(libvirt_driver_vbox_impl_la-vbox_common.o): In function `vboxDomainSnapshotCreateXML': vbox_common.c:(.text+0x698f): undefined reference to `virObjectAutoUnref' vbox_common.c:(.text+0x80fa): undefined reference to `virObjectAutoUnref' ./.libs/libvirt_driver_vbox_impl.a(libvirt_driver_vbox_impl_la-vbox_common.o): In function `vboxDomainSnapshotGetXMLDesc': vbox_common.c:(.text+0xc430): undefined reference to `virDomainSnapshotDefNew' vbox_common.c:(.text+0xc7bc): undefined reference to `virObjectAutoUnref' vbox_common.c:(.text+0xe100): undefined reference to `virObjectAutoUnref' ./.libs/libvirt_driver_vbox_impl.a(libvirt_driver_vbox_impl_la-vbox_common.o): In function `vboxAttachNetwork.isra.17': vbox_common.c:(.text+0x10656): undefined reference to `virDomainNetModelTypeToString' ./.libs/libvirt_driver_vbox_impl.a(libvirt_driver_vbox_impl_la-vbox_common.o): In function `vboxDomainGetXMLDesc': vbox_common.c:(.text+0x1574d): undefined reference to `virDomainHostdevDefNew' collect2: error: ld returned 1 exit status libtool: install: error: relink `libvirt_driver_vbox.la' with the above command before installing it make[3]: *** [install-modLTLIBRARIES] Error 1 make[3]: Leaving directory `/home/libvirt/src' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/home/libvirt/src' make[1]: *** [install] Error 2 make[1]: Leaving directory `/home/libvirt/src' make: *** [install-recursive] Error 1 Here's how I do it. [root@localhost libvirt]# uname -a Linux localhost.localdomain 3.10.0-693.el7.x86_64 #1 SMP Tue Aug 22 21:09:27 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux [root@localhost libvirt]# git clone https://libvirt.org/git/libvirt.git [root@localhost libvirt]# cd libvirt [root@localhost libvirt]# git checkout v5.5.0 [root@localhost libvirt]# ./autogen.sh [root@localhost libvirt]# ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var [root@localhost libvirt]# make -j32 [root@localhost libvirt]# make install

2 2

[libvirt-users] Installing QEMU from source causing error
by Probir Roy 22 Jul '19

22 Jul '19

Hi, I am trying to run Qemu-4.0 installed from source code. When I run virt-manager to create a VM, I get the following error: ``` Unable to complete install: 'internal error: process exited while connecting to monitor: 2019-07-19T17:06:35.954242Z qemu-system-x86_64: -enable-kvm: unsupported machine type Use -machine help to list supported machines' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 89, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2553, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 498, in start_install doboot, transient) File "/usr/share/virt-manager/virtinst/guest.py", line 434, in _create_guest domain = self.conn.createXML(install_xml or final_xml, 0) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 3603, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: internal error: process exited while connecting to monitor: 2019-07-19T17:06:35.954242Z qemu-system-x86_64: -enable-kvm: unsupported machine type Use -machine help to list supported machines ``` I configured the Qemu with following command: ``` ./../configure --prefix=/usr --enable-spice --target-list=x86_64-softmmu --enable-kvm --enable-debug --enable-libssh2 ``` Is it that I missed enabling any configuration while installing Qemu? What is the expected QEMU configuration to run with libvirt? - Probir

3 4

[libvirt-users] virsh edit has no impact on domain
by Probir Roy 22 Jul '19

22 Jul '19

Hi, I am using "virsh edit" to edit a domain. After edit it says >> Domain ubuntu18.04 XML configuration edited. However, reopening the domain with "virsh edit" shows old file. The domain is also turned off. $virsh list --all --persistent Id Name State ---------------------------------------------------- - ubuntu18.04 shut off I have also tried running "virsh define" to set new configuration. $virsh define ubuntu18.04.xml >>> Domain ubuntu18.04 defined from ubuntu18.04.xml However, it also did not change the file. How can I edit the domain config file? OS: Ubuntu 18.04.1 virsh: 4.0.0 -- Probir

2 1

[libvirt-users] domain xml questions
by Vasiliy Tolstov 19 Jul '19

19 Jul '19

Hi! If i want to use bridged network or openvswitch, does guestfwd only works with slirp network? Or how it work in case of using bridge/openvswitch? <devices> <channel type='unix'> <source mode='bind' path='/tmp/guestfwd'/> <target type='guestfwd' address='10.0.2.1' port='4600'/> </channel> </devices> If this cant't work with provided network types, how can i create inside guest serial console on 10 tty that binded to listening unix domain socket on host system? -- Vasiliy Tolstov, e-mail: v.tolstov(a)selfip.ru

2 2

[libvirt-users] Preloading shared library with libVirt
by Probir Roy 18 Jul '19

18 Jul '19

Hi, I am trying to preload two shared libraries while running Qemu using libvirt. To preload the shared libraries I have added an environment variable in the $domain.xml file with the following command: ``` virt-xml generic --edit --confirm --qemu-commandline 'env=LD_PRELOAD=/home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so:/home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so' ``` However, while running the domain, I get the following message of failure to preload the shared files in the log. ``` 2019-07-17 17:35:22.939+0000: starting up libvirt version: 1.3.1, package: 1ubuntu10.27 (Marc Deslauriers <marc.deslauriers(a)ubuntu.com> Tue, 02 Jul 2019 09:22:37 -0400), qemu version: 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.39), hostname: probir-XPS-13-9343 LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin QEMU_AUDIO_DRV=spice LD_PRELOAD=/home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so:/home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so /usr/bin/kvm-spice -name generic -S -machine pc-i440fx-xenial,accel=kvm,usb=off -cpu Broadwell-noTSX-IBRS -m 4096 -realtime mlock=off -smp 2,sockets=2,cores=1,threads=1 -uuid 8f755c9c-adf8-4baf-8d6a-947ebdf61ff8 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-generic/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet -no-shutdown -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x6.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6 -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x6.0x1 -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x6.0x2 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive file=/var/lib/libvirt/images/generic.img,format=qcow2,if=none,id=drive-ide0-0-0 -device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -drive if=none,id=drive-ide0-0-1,readonly=on -device ide-cd,bus=ide.0,unit=1,drive=drive-ide0-0-1,id=ide0-0-1 -netdev tap,fd=26,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:82:62:ba,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -chardev spicevmc,id=charchannel0,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0 -spice port=5900,addr=127.0.0.1,disable-ticketing,image-compression=off,seamless-migration=on -device qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vgamem_mb=16,bus=pci.0,addr=0x2 -device intel-hda,id=sound0,bus=pci.0,addr=0x4 -device hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -chardev spicevmc,id=charredir0,name=usbredir -device usb-redir,chardev=charredir0,id=redir0 -chardev spicevmc,id=charredir1,name=usbredir -device usb-redir,chardev=charredir1,id=redir1 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x7 -msg timestamp=on Domain id=9 is tainted: custom-argv ERROR: ld.so: object '/home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored. ERROR: ld.so: object '/home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored. ERROR: ld.so: object '/home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored. ERROR: ld.so: object '/home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored. char device redirected to /dev/pts/21 (label charserial0) ``` I further went ahead to verify the shared library with ldd and ls -l. Following results came out: ``` probir@probir-XPS-13-9343:~/Downloads/kpv_temp/temp/kvmTest/test/kvm$ ls -l /home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so -rwxrwxr-x 1 probir probir 834240 Jun 13 17:53 /home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so probir@probir-XPS-13-9343:~/Downloads/kpv_temp/temp/kvmTest/test/kvm$ ldd /home/probir/Downloads/kpv_temp/temp/kvmTest/build_kvm/libperform.so linux-vdso.so.1 => (0x00007ffdd97d5000) libxed.so => /home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/xed/kits/xed-install-base/lib/libxed.so (0x00007f706442e000) libmonitor.so.0 => /home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so.0 (0x00007f706420a000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f7063fed000) libbfd-2.26.1-system.so => /usr/lib/x86_64-linux-gnu/libbfd-2.26.1-system.so (0x00007f7063ca8000) libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f7063926000) libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f7063710000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f7063346000) /lib64/ld-linux-x86-64.so.2 (0x00007f7064f48000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f7063142000) libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f7062f28000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f7062c1f000) ``` and ``` probir@probir-XPS-13-9343:~/Downloads/kpv_temp/temp/kvmTest/test/kvm$ ls -l /home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so lrwxrwxrwx 1 probir probir 19 Mar 28 13:45 /home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so -> libmonitor.so.0.0.0 probir@probir-XPS-13-9343:~/Downloads/kpv_temp/temp/kvmTest/test/kvm$ ldd /home/probir/Downloads/kpv_temp/temp/kvmTest/dependencies/libmonitor/installDir/lib/libmonitor.so linux-vdso.so.1 => (0x00007ffc5d12b000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007ff8ae23e000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007ff8ade74000) /lib64/ld-linux-x86-64.so.2 (0x00007ff8ae666000) ``` I cannot figure out what is causing the failure of preload. Previously, I manually preloaded the same shared libraries for other application. Probir

3 2

[libvirt-users] filesharing file owner problem
by Vojto Ľach 17 Jul '19

17 Jul '19

Hello, I'm having an issue with usage of libvirt driven qemu where I'm sharing directory with guest machine. virsh domain filesharing configuration: <filesystem type='mount' accessmode='passthrough'> <driver type='path' wrpolicy='immediate'/> <source dir='/media/share'/> <target dir='data'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </filesystem> /etc/libvirt/qemu.conf : user = "root" group = "root" dynamic_ownership = 0 clear_emulator_capabilities = 0 even with this unsecure configuration I wasn't able to achieve that newly created files/dirs in guest machine have ownership of guest machine user but they are still created under root user id. Also strange is that group of those files/dirs are correct. Can somebody help me with this? Thank you. Vojtech

2 1

[libvirt-users] libvirtd failing on MacOS in setgroups
by Marcus Furlong 17 Jul '19

17 Jul '19

Hi, I get the following error when running libvirtd on MacOS as root: $ sudo libvirtd 2019-07-11 00:12:33.379+0000: 123145573953536: info : libvirt version: 5.5.0 2019-07-11 00:12:33.379+0000: 123145573953536: warning : virProcessGetStartTime:1070 : Process start time of pid 49746 not available on this platform 2019-07-11 00:12:33.379+0000: 123145573953536: error : virSysinfoReadDMI:1172 : internal error: Failed to find path for dmidecode binary 2019-07-11 00:12:33.380+0000: 123145573953536: error : virFileFindHugeTLBFS:3734 : this function is not supported by the connection driver: virFileFindHugeTLBFS 2019-07-11 00:12:33.382+0000: 123145573953536: warning : virQEMUCapsInit:919 : Failed to get host CPU cache info 2019-07-11 00:12:33.401+0000: 123145573953536: error : virHostCPUGetTscInfo:1405 : Probing TSC is not supported on this platform: Function not implemented 2019-07-11 00:12:33.401+0000: 123145573953536: error : virExec:521 : Cannot find 'pm-is-supported' in path: No such file or directory 2019-07-11 00:12:33.401+0000: 123145573953536: warning : virQEMUCapsInit:926 : Failed to get host power management capabilities 2019-07-11 00:12:33.401+0000: 123145573953536: error : virNumaGetPages:988 : Operation not supported: page info is not supported on this platform 2019-07-11 00:12:33.401+0000: 123145573953536: warning : virQEMUCapsInit:933 : Failed to get pages info 2019-07-11 00:12:33.407+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-alpha for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.407+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-alpha: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-alpha for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.413+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-arm for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.413+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-arm: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-arm for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.419+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-arm for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.419+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-arm: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-arm for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.424+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-aarch64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.424+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-aarch64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-aarch64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.431+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-cris for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.431+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-cris: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-cris for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.437+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-i386 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.437+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-i386: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-i386 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.443+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-lm32 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.443+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-lm32: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-lm32 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.449+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-m68k for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.449+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-m68k: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-m68k for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.497+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-microblaze for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.497+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-microblaze: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-microblaze for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.503+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-microblazeel for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.503+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-microblazeel: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-microblazeel for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.509+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mips for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.509+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-mips: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mips for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.515+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mipsel for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.515+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-mipsel: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mipsel for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.521+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mips64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.521+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-mips64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mips64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.527+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mips64el for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.527+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-mips64el: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-mips64el for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.533+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-ppc for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.533+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-ppc: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-ppc for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.571+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-ppc64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.571+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-ppc64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-ppc64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.576+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-ppc64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.576+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-ppc64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-ppc64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.582+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-riscv32 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.582+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-riscv32: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-riscv32 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.588+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-riscv64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.588+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-riscv64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-riscv64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.594+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-s390x for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.594+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-s390x: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-s390x for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.600+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sh4 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.600+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-sh4: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sh4 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.605+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sh4eb for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.605+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-sh4eb: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sh4eb for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.612+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sparc for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.612+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-sparc: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sparc for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.619+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sparc64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.619+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-sparc64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-sparc64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.667+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-unicore32 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.667+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-unicore32: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-unicore32 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.673+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-x86_64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.673+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-x86_64: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-x86_64 for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.679+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-xtensa for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.679+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-xtensa: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-xtensa for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.685+0000: 123145573953536: error : qemuProcessQMPLaunch:8501 : internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-xtensaeb for probing: libvirt: error : cannot set supplemental groups: Invalid argument 2019-07-11 00:12:33.685+0000: 123145573953536: warning : virQEMUCapsLogProbeFailure:4578 : Failed to probe capabilities for /usr/local/bin/qemu-system-xtensaeb: internal error: Failed to start QEMU binary /usr/local/bin/qemu-system-xtensaeb for probing: libvirt: error : cannot set supplemental groups: Invalid argument As a result `virsh capabilities` as root returns nothing: $ sudo virsh capabilities | grep qemu <baselabel type='qemu'>+0:+0</baselabel> whereas running as a regular user works fine: $ virsh capabilites | grep qemu <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> <domain type='qemu'/> and by extension, running VMs as regular user works fine via qemu:///session , but qemu:///system does not work. It seems like setgroups is failing: https://github.com/libvirt/libvirt/blob/v5.5.0/src/util/virutil.c#L1045-L10… Is this the expected behaviour? Marcus. -- Marcus Furlong

1 0

[libvirt-users] Question regarding using multiple physical functions inside a network pool.
by Mohamed, Faris 16 Jul '19

16 Jul '19

Hello, I was planning on adding multiple physical functions using the built in SR-IOV features offered by libvirt to a create a bigger pool of virtual functions using the <forward mode='hostdev' managed='yes'> heading (I want to be able to use more virtual machines then there are virtual functions available on an ethernet port). As soon as I try to define multiple physical functions in a pool, I get this error: error: Failed to define network from biggernetwork.xml error: XML error: Only one <pf> element is allowed in <forward> of network bigger network when using this command: sudo virsh net-define biggernetwork.xml on the following XML document: <network> <name>bigger network</name> <forward mode='hostdev' managed='yes'> <pf dev='eth5'/> <pf dev='eth7'/> </forward> </network> It seems that you are not able to add multiple physical functions to this network to create a pool of more virtual functions. Is there anyway that you can do this using that I am missing? I seem to be looking at the documentation and there seems to be nothing related to this. I think this would be extremely useful and would make automate adding virtual functions to virtual machines much easier to manage. Thanks in advance, Faris ----------------------------------------------------------------------------------------------------------------------- Notice: This e-mail together with any attachments may contain information of Ribbon Communications Inc. that is confidential and/or proprietary for the sole use of the intended recipient. Any review, disclosure, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please notify the sender immediately and then delete all copies, including any attachments. -----------------------------------------------------------------------------------------------------------------------

2 1

Re: [libvirt-users] Strange issues with libvirt v5.5.0
by Peter Krempa 12 Jul '19

12 Jul '19

On Thu, Jul 11, 2019 at 16:46:29 +0200, Julian Sternberg wrote: > <html><head></head><body><div style="font-family: Verdana;font-size: 12.0px;"><div>Hey Peter,</div> Hi, at first I'd like to ask you to CC the libvirt-users or libvir-list with such kind of questions (questions implying regression of behaviour are okay on the development list). I've CC'd libvirt-users with this reply to archive this. Also I'd strongly encourage you _not_ to use HTML formatting on thechnical communications. As you can see I'm using a plain-text mail client and it messes up. > > <div> </div> > > <div>can you give me some insight regarding this commit:<br/> > https://github.com/libvirt/libvirt/commit/7d5b283065e484645b6116397ac55b068…</div> That one does not seem to be related to your issue. It simply assumes that when starting a qemu process (so nothing really related to any of the vol-* and pool-* virsh APIs) when the disk is referencing a volume from the storage driver and the referenced volume is a directory, then we assume that qemu should use 'fat' as the driver. > > <div> </div> > > <div>I'm having strange issues since switching from libvirt 5.4.0 to 5.5.0 which is as follows:</div> > > <div> </div> I'll have to cut off everything here and replace it with a non-HTML version so there might be weird quoting: > > on libvirt 5.5.0 the volumes list only show the first image from the remote ceph rbd cluster: > > # virsh vol-list vm_volumes > Name Path > ------------------------------------------------- > vmanager101-root vm_volumes/vmanager101-root > > But the rbd command itself all seing them: > # rbd -p vm_volumes ls > vmanager101-root > vmanager102-root > vmanager103-root > vmanager105-root > > on libvirt5.4.0 everything looks correct and it shows all the existing ones: > > # virsh vol-list vm_volumes > Name Path > ------------------------------------------------- > vmanager101-root vm_volumes/vmanager101-root > vmanager102-root vm_volumes/vmanager102-root > vmanager103-root vm_volumes/vmanager103-root > vmanager105-root vm_volumes/vmanager105-root I've looked at the git history and didn't find anything that could be related here unfortunately. I'm also not very familiar with RBD in libvirt. > > Seconds strange behavior is as follow: > virsh vol-create-as vm_volumes test.img --capacity 1G --format raw > error: Failed to create vol test.img error: unsupported configuration: only RAW volumes are supported by this storage pool So this is really weird. The error message is produced if the target format is not 'raw' but the above command clearly supplies it. I'd suggest you collect debug logs while trying both and attach them here. Unfortunately I don't see what could be wrong here.

3 2

[libvirt-users] UDP broadcasts vs. nat Masquerading issue
by Nikolai Zhubr 06 Jul '19

06 Jul '19

Hi all, I'm observing an issue that as soon as libvirt starts, UPD broadcasts going through physical network (and unrelated to any virtualization) get broken. Specifically, windows neighbourhood browsing through samba's nmbd starts suffering badly (Samba is running on this same box). At the moment I'm running a quite outdated version 1.2.9 of libvirt, but other than this issue, it does its job pretty well, so I'd first consider some patching/backporting rather than totally replacing it with a new one. Anyway, I first need to better understand what is going on and what is wrong with it. This could also be related somewhat to https://www.redhat.com/archives/libvir-list/2013-September/msg01311.html but I suppose it is not exactly that thing. I've already figured the source of trouble is anyway related to these rules added: -A POSTROUTING -o br0 -j MASQUERADE -A POSTROUTING -o enp0s25 -j MASQUERADE -A POSTROUTING -o virbr2_nic -j MASQUERADE -A POSTROUTING -o vnet0 -j MASQUERADE Here, virbr2_nic and vnet0 are used by libvirt for arranging network configurations for VMs, ok. However, br0 is a main interface of this host with primary ip address, with enp0s25 being a physical nic of this host, and it is used for all sorts of regular (unrelated to virtualization) communications. Also, br0 is used for attaching bridged (as opposed to NATed) VMs managed by libvirt. Clearly, libvirt somehow chooses to set up masquerading for literally all existing network interfaces here (except lo), but I can't see a real reason for the first two rules in the list above. Furthermore, they corrupt UDP broadcats coming from outside and reaching this host (through enp0s25/br0) such that source address gets replaced by this hosts primary address (as per masquerading). I've verified this by arranging a hand-crafted UDP listener and printing the respective source addresses as seen by normal userspace. Now I've discovered that I can "eliminate" the problem by either: 1. Removing "-A POSTROUTING -o br0 -j MASQUERADE" (manually) 2. Inserting "-A POSTROUTING -s 192.168.0.0/24 -d 192.168.0.255/32 -j ACCEPT" (Of course correcting rules by hand is not a solution, just a test) So question is, how the correct rules should ideally look like? And, is this issue known/fixed in most current libvirt? Thank you, Regards, Nikolai

3 3

[libvirt-users] libvirt-python Create External Snapshot
by Roger Jin 05 Jul '19

05 Jul '19

Hi Libvirt, Does libvirt-python currently support the creation of external snapshots? I ran domain.snapshotCreateXML(xml) where xml is <domainsnapshot> <name>snap1</name> <description>Snapshot of OS install and updates</description> <disks> <disk name='vda'> <source file='/home/potato/libvirt/backups/test-snap1.qcow2'/> </disk> </disks> </domainsnapshot> And got the following error: if ret is None:raise libvirtError('virDomainSnapshotCreateXML() failed', dom=self) libvirt.libvirtError: unsupported configuration: disk 'vda' must use snapshot mode 'internal' Is this expected? Thanks! Sincerely, Roger Jin

2 1

[libvirt-users] Blockpull while domain is shutoff
by Roger Jin 05 Jul '19

05 Jul '19

Hi Libvirt, Is there a command that performs the same operation as blockpull while a domain is shutoff? I have a backing chain base <-- A <-- B that I would like to shorten to base <-- B It seems like blockpull B, setting --base <path-to-base> does this, but only when the domain is running. Thanks! Sincerely, Roger Jin

2 1

[libvirt-users] libvirt-python blockPull
by Roger Jin 04 Jul '19

04 Jul '19

Hi Libvirt, Does libvirt-python currently support adding a base path to virDomain.blockPull()? In particular, I would like to have the behavior of the following virsh command (from https://kashyapc.wordpress.com/2013/01/22/live-backup-with-external-disk-sn…) in libvirt-python: [image: image.png] Thanks! Sincerely, Roger Jin

1 0