October 2016 - Users - libvirt List Archives

[libvirt-users] bridge / ubuntu / no arp reply
by François Chenais 15 Oct '26

15 Oct '26

Hello I'm trying to setup a bridged guest on an ubuntu 13.10 but it doesn't work. (Everything is ok with NAT) Network sniffing shows that arp replies don't come back to the guest. Test 1 ------ Guest : ping host_bridge_ip (ok) Test 2 ------ Guest: ping other_lan_host (KO) other_lan_host - receives arp who-is request - sends arp reply - arp -a shows the guest macaddr => Guest doesn't receive reply Test 3 ------ other_lan_host ping the Guest (KO) - arp -a shows "incomplete" addr - Guest receives nothing On Host ------- network tcpdump on bridge or vnet interfaces shows request but no reply ... Thanks in advance for help or ideas François

3 4

[libvirt-users] ceph rbd pool and libvirt manageability (virt-install)
by Jelle de Jong 28 Aug '18

28 Aug '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I created a rbd pool and activated it, but I can't seem to create volumes in it with virsh or virt-install? # virsh pool-dumpxml myrbdpool <pool type='rbd'> <name>myrbdpool</name> <uuid>2d786f7a-2df3-4d79-ae60-1535bcf1c6b5</uuid> <capacity unit='bytes'>6997998301184</capacity> <allocation unit='bytes'>10309227031</allocation> <available unit='bytes'>6977204658176</available> <source> <host name='ceph01.powercraft.nl' port='6789'/> <host name='ceph02.powercraft.nl' port='6789'/> <host name='ceph03.powercraft.nl' port='6789'/> <name>libvirt-pool</name> <auth type='ceph' username='libvirt'> <secret uuid='029a334e-ed57-4293-bb99-ffafa8867122'/> </auth> </source> </pool> # virt-install --version 1.0.1 # virsh --version 1.2.9 I ended using virsh edit ceph-test.powercraft.nl and making creating the disk manually. <disk type='network' device='disk'> <auth username='libvirt'> <secret type='ceph' uuid='029a334e-ed57-4293-bb99-ffafa8867122'/> </auth> <source protocol='rbd' name='libvirt-pool/kvm01-storage'> <host name='ceph01.powercraft.nl' port='6789'/> <host name='ceph02.powercraft.nl' port='6789'/> <host name='ceph03.powercraft.nl' port='6789'/> </source> <target dev='vdc' bus='virtio'/> </disk> I use virt-install a lot to define, import and undefine domains, how can I use virt-install to manage my rdb disks? Kind regards, Jelle de Jong -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iJwEAQECAAYFAlV1xlQACgkQ1WclBW9j5HkbPQP+PjNrzvlqysslOp2Yk7wH4Mxy 2sh2dn96G0KOAHEeEn3BN6IWlnD1TADZbHdpTtMwkdv48Xwn0sP1s+3QDM4pb3gP n+z+dVxS8FouDIy/eiso3IBCj3g4TWbEX8ZHqs3jKqe0lZgAXBzB9xYSUowcEBrZ ddkPbr8p8ozWyOG+9V8= =lkK7 -----END PGP SIGNATURE-----

2 3

[libvirt-users] virRandomBits - not very random
by Brian Rak 01 Jun '18

01 Jun '18

I just ran into an issue where I had about 30 guests get duplicate mac addresses assigned. These were scattered across 30 different machines. Some debugging revealed that: 1) All the host machines were restarted within a couple seconds of each other 2) All the host machines had fairly similar libvirtd pids (within ~100 PIDs of each other) 3) Libvirt seeds the RNG using 'time(NULL) ^ getpid()' This perfectly explains why I saw so many duplicate mac addresses. Why is the RNG seed such a predictable value? Surely there has to be a better source of a random seed then the timestamp and the pid? The PID seems to me to be a very bad source of any randomness. I just ran a test across 60 of our hosts. 43 of them shared their PID with at least one other machine.

7 13

[libvirt-users] stream finish throws exception via python API
by Shahar Havivi 27 Nov '16

27 Nov '16

Hi, The following snippet works fine e.g. receiving the data but when calling stream.finish() we get the following error: stream = con.newStream() vol.download(stream, 0, 0, 0) buf = stream.recv(1024) stream.finish() libvirt: I/O Stream Utils error : internal error: I/O helper exited abnormally Traceback (most recent call last): File "./helpers/kvm2ovirt", line 149, in <module> download_volume(vol, item[1], diskno, disksitems, pksize) File "./helpers/kvm2ovirt", line 102, in download_volume stream.finish() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 5501, in finish if ret == -1: raise libvirtError ('virStreamFinish() failed') libvirt.libvirtError: internal error: I/O helper exited abnormally Am I doing something wrong? Thank you, Shahar.

5 12

[libvirt-users] sttic vnet device for guest
by Anton Gorlov 08 Nov '16

08 Nov '16

Can i assign static vnet* device for some guests?

4 9

[libvirt-users] Guest startup process blocks if a hook's child process is still running (i.e : after forking)
by Nicolas Roy-Renaud 08 Nov '16

08 Nov '16

I've been having issues with KVM lately where I sometimes put my host into sleep while a guest is still running, which prevents it from waking up properly. This is somewhat expected due to my setup, but I have mistakenly done this more than once and could use a workaround to stop this from happening. So I've been trying to setup a libvirt hook to fork an instance of systemd-inhibit when the start hook is called and keep it running until the shutdown hook is called. This seems to work well when I run the hook script in a normal bash shell, but running it through libvirt simply blocks the starting process until systemd-inhibit quits. Here's the script : LOCK_FILE="/tmp/vfio-lock-$OBJECT" if [ "$OPERATION" == "start" ]; then ( touch "$LOCK_FILE"; systemd-inhibit --what="sleep" \ --who="libvirt" \ --mode="block" \ inotifywait -qq -e delete "$LOCK_FILE" ) & disown $! exit fi if [ "$OPERATION" == "shutdown" ]; then rm "$LOCK_FILE" fi Is there some way to make it so libvirt sees the hook script exiting and carries on with the rest of its guest startup process even after a process fork or would that require changes in the internal hook handling functions? - Nicolas

1 1

[libvirt-users] pci-assign fails with read error on config-space file
by Henning Schild 02 Nov '16

02 Nov '16

Hey, i am running an unusual setup where i assign pci devices behind the back of libvirt. I have two options to do that: 1. a wrapper script for qemu that takes care of suid-root and appends arguments for pci-assign 2. virsh qemu-monitor-command ... 'device_add pci-assign...' I know i should probably not be doing this, it is a workaround to introduce fine-grained pci-assignment in an openstack setup, where vendor and device id are not enough to pick the right device for a vm. In both cases qemu will crash with the following output: > qemu: hardware error: pci read failed, ret = 0 errno = 22 followed by the usual machine state dump. With strace i found it to be a failing read on the config space file of my device. /sys/bus/pci/devices/0000:xx:xx.x/config A few reads out of that file succeeded, as well as accesses on vendor etc. Manually launching a qemu with the pci-assign works without a problem, so i "blame" libvirt and the cgroup environment the qemu ends up in. So i put a bash into the exact same cgroup setup - next to a running qemu, expecting a dd or hexdump on the config-space file to fail. But from that bash i can read the file without a problem. Has anyone seen that problem before? Right now i do not know what i am missing, maybe qemu is hitting some limits configured for the cgroups or whatever. I can not use pci-assign from libvirt, but if i did would it configure cgroups in a different way or relax some limits? What would be a good next step to debug that? Right now i am looking at kernel event traces, but the machine is pretty big and so is the trace. That assignment used to work and i do not know how it broke, i have tried combinations of several kernels, versions of libvirt and qemu. (kernel 3.18 and 4.4, libvirt 1.3.2 and 2.0.0, and qemu 2.2.1 and 2.7) All combinations show the same problem, even the ones that work on other machines. So when it comes to software versions the problem could well be caused by a software update of another component, that i got with the package manager and did not compile myself. It is a debian 8.6 with all recent updates installed. My guess would be that systemd could have an influence on cgroups or limits causing such a problem. regards, Henning

5 7

[libvirt-users] pass-through hwrng
by lejeczek 01 Nov '16

01 Nov '16

hi all I have in my centos 7 this: crw-------. 1 root root 10, 183 Oct 11 21:28 /dev/hwrng and VM fails, complains like this: virsh # start volatile-work6 error: Failed to start domain volatile-work6 error: internal error: process exited while connecting to monitor: 2016-10-19T09:42:05.988142Z qemu-kvm: -object rng-random,id=objrng0,filename=/dev/hwrng: Could not open '/dev/hwrng': Permission denied which reads logical. Now - is this normal that hwrng is created with these permissions? And if yes then how to pass-through it to the VMs? How to aid VMs with hardware random numbers generator? many thanks. L

2 1

[libvirt-users] How do you set real time bandwidth for a container?
by Peter Steele 30 Oct '16

30 Oct '16

When I create a VM using libvirt, the VM comes up the path /sys/fs/cgroup/cpu/cpu.rt_runtime_us set to something like 1000000. When I create a container however, the path /sys/fs/cgroup/cpu/cpu.rt_runtime_us is 0. This prevents my containers from being able to run any real time applications. I have to explicitly echo a value into this field in order to give the container some real time bandwidth and allow it to run real time processes. Is it possible to define this in a container's XML config? Or is there another method I should be using to enable real time capability in a container? Peter

2 1

[libvirt-users] command guest-file-open failed to open file - Permission denied
by 刘梦可 30 Oct '16

30 Oct '16

hello, I am using libvirt 1.2.17 on CentOS 7.2 - kernel 3.10.0-327.13.1.el7.x86_64. The command guest-file-open failed to open file with error "Permission denied", the detail is as below: virsh qemu-agent-command instance-00000a9c '{"execute":"guest-file-open", "arguments":{"path":"/home/centos/test","mode":"r"}}' error: internal error: unable to execute QEMU agent command 'guest-file-open': failed to open file '/home/centos/test' (mode: 'r'): Permission denied In the guest, the file '/home/centos/test' exist and the access permissions is 777 as below: -rwxrwxrwx. 1 centos centos 18 Oct 27 11:16 test How can I fix it? Thanks very much!!! -mkliu28

2 1

Re: [libvirt-users] Libvirt newer than 2.1.0 doesnt start up
by Rene Pasing 29 Oct '16

29 Oct '16

Hi all, thanks so far for your time and ideas. Please find the gdb output and also the debug-output of libvirt (as requested by Michal Privoznik and Laine Stump) here: https://paste.xinu.at/m-gPSHl/ On 10/19/2016 01:58 AM, Michal Privoznik wrote: > Those "Network is already in use by interface virbr1" error messages > worry me. Is the bridge active before you start libvirtd? If so we might > be losing netowrk state XML (or fail to parse it) and thus think network > is not started and because of autostart we try to start it again (which > fails). > [...] > Before you start libvirt, are there any files under > /var/run/libvirt/network/ ? If so, what's their content? Laine was already correct about that, this error message only appears when I manually try to restart libvirt after it already hung up. Maybe I should've made that more clear. Additionaly, no, there are no files in that directory, also I am pretty sure that I only got one instance of libvirt running According to the GDB log, the libvirt process is endlessly iterating over [1]. Any ideas what could be wrong? Thanks in advance Regards Rene [1] = https://github.com/libvirt/libvirt/blob/master/src/network/bridge_driver.c#…

2 3

[libvirt-users] Failed to launch libvirt 1.2.7
by Marina Danial 25 Oct '16

25 Oct '16

Hello, I am currently working on Redhat 6 - Kernel 2.6.32-358.el6.x86_64. It has by default libvirt 0.10.2. I wanted version 1.2.7. So I downloaded this and libvirt-1.2.7.tar.gz and I followed the following steps: 1. ./configure (with its default settings) 2. make 3. make install Currently, the installation is in: /usr/local and the source tree is in /export/home/libvirt. I stopped the previously installed daemon so that the new one takes effect. I launched the daemon from /export/home/libvirt/daemon/libvirtd -d. However every time I launch the C++ code, this message appears: libvir: XML-RPC error : Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory Failed to open connection to qemu:///system My questions are: 1. How can I launch the daemon from the source tree? It does not behave as it should when it is launched from /etc/init.d 2. How can any application e.g. virt-manager look at the new paths of the newly installed libvirt? 3. How can I get libvirt to work from the source tree as if it was originally installed in Redhat? Thanks Marina

5 4

[libvirt-users] security BPC
by Michael Ströder 20 Oct '16

20 Oct '16

HI! Disclaimer: I'm a libvirt beginner using it for managing virtual machines based on qemu-kvm. Is there any documentation describing how to harden libvirt/qemu-kvm installations? Escpecially how to improve isolation of VMs: - secure time sync (with or without ntpd?) - random number generation - running VMs as different host OS users I do not need general OS hardening advice. Ciao, Michael.

3 2

[libvirt-users] Passing "migratable=no" to qemu in domain's XML
by Žilvinas Žaltiena 20 Oct '16

20 Oct '16

Hi, I want to use Invariant TSC with qemu, and to do that qemu must get the following args: "-cpu host,migratable=no,+invtsc". invtsc works only if migratable=no is passed too. The "+invtsc" part is sucessfully handled by using <feature name="invtsc"/> inside domain's XML, however I don't how/where to put the "migratable=no" there. Is there an elegant way to pass "migratable=no" to qemu via domain's XML without using <qemu:arg/> tags?

1 0

[libvirt-users] Libvirt newer than 2.1.0 doesnt start up
by Rene Pasing 19 Oct '16

19 Oct '16

Hi all, I have some problems with libvirt >2.1.0 (so 2.2.0 and 2.3.0): I have a working environment using libvirt 2.1.0 with 1 domain (called "mail") and one network (called "default6"), both are autostarted. I have no problems with this environment using libvirt 2.1.0, everything works great. But after (testwise) updating to libvirt 2.2.0 or 2.3.0, libvirt doesn't start up anymore. Some investigations showed that apparently my "default6" network is the problem. Libvirt is starting correctly after disabling all autostarts. When I then virsh' into the system daemon and type "net-start default6", then nothing happens and that command just hangs infinitely. Further information, relevant log entries and e.g. the used default6.xml configuration file can be found here, as I first thought it would be a configuration error from my side: https://bbs.archlinux.org/viewtopic.php?pid=1653221 Do you maybe have an idea what could be going on? Or do you maybe need more information, and if yes, which exactly? Thanks in advance Regards Rene

3 3

[libvirt-users] Fw: HELP
by zhunxun＠gmail.com 18 Oct '16

18 Oct '16

zhunxun(a)gmail.com From: zhunxun(a)gmail.com Date: 2016-10-18 18:46 To: berrange Subject: HELP Now I want to get qemu:commandline XML content in Libvirt,and then do my own job,but I do not know how to do it.Can you help me?? thank you ! the xml content is follows: <qemu:commandline> <qemu:arg value='-enable-kvm'/> <qemu:arg value='-drive'/> <qemu:arg value='file=/root/nvram_2.0-jin.qcow2,if=none,id=nvram0-0-0,format=qcow2'/> <qemu:arg value='-device'/> <qemu:arg value='tpm-tis,tpmdev=tpm-tpm0,id=tpm0'/> <qemu:arg value='-tpmdev'/> <qemu:arg value='libtpms,id=tpm-tpm0,nvram=nvram0-0-0,startup=clear'/> <qemu:arg value='-bios'/> <qemu:arg value='/root/xenSeabios/out/bios.bin'/> </qemu:commandline> Now I want to get third file path,how can I get it ?? thanks very much!! zhunxun(a)gmail.com

1 0

[libvirt-users] Fwd: Libvirt adds extra parameters in domain XML
by Marina Danial 18 Oct '16

18 Oct '16

I have a predetermined set of commands that I want to launch qemu with: sudo `which qemu-system-x86_64` -m 4G $(IMAGE) -enable-kvm \ -nographic \ -net nic,model=virtio,netdev=net0,macaddr=$(MAC),vlan=0 \ -netdev tap,id=net0,ifname=tap01,vhost=on,script=no,downscript=no \ -net nic,model=virtio,netdev=net1,macaddr=$(MANAGE_MAC),vlan=1 \ -netdev tap,id=net1,ifname=tap02,vhost=on,script=no,downscript=no \ I dont need any extra configuration from libvirt. is this possible? Or can anyone help with a possible xml configuration ? On Thu, Oct 13, 2016 at 1:13 PM, Martin Kletzander <mkletzan(a)redhat.com> wrote: > On Thu, Oct 13, 2016 at 11:49:44AM +0200, Marina Danial wrote: > >> Hello, >> >> In my C++ code, I generate my own domain XML file and I >> use virDomainCreateXML or virDomainDefineXML to launch my qemu VM. >> However, >> when I get to check which commands are sent to the qemu commandline, I >> find >> that libvirt has added so many extra parameters to the ones I have already >> set. How can I prevent libvirt from adding any extra parameters to the >> ones >> I originally defined in the domain XML? >> >> > What problems are you having with those? What specific ones are > problematic for you? Libvirt adds a lot of things so that the domain is > predictable, it can talk to it later on and so on. Some of them are > adding the same things you would have there without -no-defconfig and > similar. Just so we can guarantee some compatibility etc. > > Help will be highly appreciated. >> >> >> Thanks >> > > _______________________________________________ >> libvirt-users mailing list >> libvirt-users(a)redhat.com >> https://www.redhat.com/mailman/listinfo/libvirt-users >> >

3 3

[libvirt-users] How to tell spicy client to use SASL authentication?
by mordenkainen 13 Oct '16

13 Oct '16

I'm using libvirt in desktop environment. Single host machine, pair of users, a few guest machines. The first thought was that unix socket restricted to specific group is just enough for authentication. But virsh has the power like sudo: you could define pool on real device and write anything on it. So I decided to authenticate with password for each virsh use. I'm using SASL + saslauthd + PAM for that case. /etc/sasl2/libvirt.conf: mech_list: PLAIN pwcheck_method: saslauthd /etc/sasl2/qemu.conf: mech_list: PLAIN pwcheck_method: saslauthd /etc/pam.d/libvirt: auth requisite pam_listfile.so item=group sense=allow file=/etc/libvirt/allow_group auth required pam_tally2.so onerr=succeed auth required pam_nologin.so auth required pam_unix.so try_first_pass likeauth nullok account requisite pam_listfile.so item=group sense=allow file=/etc/libvirt/allow_group account required pam_nologin.so account required pam_unix.so /etc/pam.d/qemu: auth requisite pam_listfile.so item=group sense=allow file=/etc/libvirt/allow_group auth required pam_tally2.so onerr=succeed auth required pam_nologin.so auth required pam_unix.so try_first_pass likeauth nullok account requisite pam_listfile.so item=group sense=allow file=/etc/libvirt/allow_group account required pam_nologin.so account required pam_unix.so They are two identical configs for libvirt and for qemu. The first works flawlessly. virsh prompts for user and password and then login me to the shell. But spicy fails. It prompts only for the password and fails after receiving it leaving error message in syslog: Oct 13 23:24:21 paladin spicy[9001]: GSSAPI client step 1 What are the supposed actions I should perform to get further debug informations?

1 0

[libvirt-users] Fwd: Problems connecting to the libvirtd server
by Stefano Ricci 13 Oct '16

13 Oct '16

---------- Forwarded message ---------- From: Stefano Ricci <sfn.rcc(a)gmail.com> Date: 2016-10-11 12:35 GMT+02:00 Subject: Re: [libvirt-users] Problems connecting to the libvirtd server To: Michal Privoznik <mprivozn(a)redhat.com> There is not AppArmor and SElinux is disabled. The permits of the sock are as follows: libvirt-sock-admin 0700 (rwx) root: root libvirt-sock 0700 (rwx) root: root libvirt-sock-ro 0777 (rwxrwxrwx) root: root The libvirtd process runs with the root user. Below you will find the link to the requested log: http://pastebin.com/0jtpWU0h (libvirt_client.log command LIBVIRT_DEBUG = 1 virsh -c qemu: /// system list --all) Stefano 2016-10-11 11:04 GMT+02:00 Michal Privoznik <mprivozn(a)redhat.com>: > > On 10.10.2016 18:36, Stefano Ricci wrote: > > Hello everyone > > I do not know if it is correct address this mailing lists but I can > > not use libvirt. > > I run compile libvirt version 2.2.0 into environment lfs stable with > > qemu 2.7.0 and have not had any problems. > > The program when it starts not report any errors in the log, with > > activated debug level file. > > Only when you try to connect with the following command virsh -c > > qemu:///system remains hung without reporting any error either in the > > logs that screen. > > The command virsh -c test:///default list instead concludes on a regular basis. > > I attach the file libvirt.log and libvirt.conf > > Interesting. Maybe something else is causing the problem? Is there an > AppArmor running? What are the socket perms? Can you attach client debug > logs? (well, maybe paste them somewhere to pastebin-like service) > > http://wiki.libvirt.org/page/DebugLogs > > Michal

2 7

[libvirt-users] problem with disk virtio driver
by Andrei Perietanu 13 Oct '16

13 Oct '16

I just ran into a problem I can't make heads or tails of, so I'm hoping to get some help here. I have a custom built Embedded Linux running qemu-kvm 1.1.2 and libvirt 1.2.20 I'm creating a domain with the following config: <domain type='kvm'> <name>myVM</name> <memory unit='KiB'>2097152</memory> <vcpu placement='static'>2</vcpu> <os> <type arch='x86_64'>hvm</type> <boot dev='hd'/> <boot dev='cdrom'/> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-model'/> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdb' bus='ide'/> <source file='custom.iso'/> <readonly/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/path/to/vdisk.img'/> <target dev='vda' bus='virtio'/> </disk> <controller type='pci' model='pci-root'/> <controller type='usb'/> <controller type='ide'/> <interface type='bridge'> <source bridge='virbr0'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/> </video> <watchdog model='i6300esb' action='reset'/> <memballoon model='none'/> </devices> </domain> Granted the OS I'm installing is again a custom Linux with some software running on top ..so It's not a well known OS...but I'm hoping that does not matter much. After installation I get all sorts of kernel panics and errors about services not being able to start. So I tried the same thing on ubuntu 14.04.2 LTS which installed qemu-kvm 2.0.0 and libvirt 1.2.2 Same config xml, but this time it worked better -I was not getting the kernel panics. The OS I'm installing does not support IDE disks, it needs a virtio disk. The obvious solution here would be to try and get a newer version of qemu, but since we're talking about a custom built Linux I'd have to add the package manually and compile from source...which cakes a long time to do. So before attempting that....just wondering....is there a better way? Anything I can try? Thanks, Andrei -- The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you receive this in error please contact the sender and delete the material from any computer immediately. It is the policy of Klas Limited to disavow the sending of offensive material and should you consider that the material contained in the message is offensive you should contact the sender immediately and also your I.T. Manager. Klas Telecom Inc., a Virginia Corporation with offices at 1101 30th St. NW, Washington, DC 20007. Klas Limited (Company Number 163303) trading as Klas Telecom, an Irish Limited Liability Company, with its registered office at Fourth Floor, One Kilmainham Square, Inchicore Road, Kilmainham, Dublin 8, Ireland.

3 7

[libvirt-users] Libvirt adds extra parameters in domain XML
by Marina Danial 13 Oct '16

13 Oct '16

Hello, In my C++ code, I generate my own domain XML file and I use virDomainCreateXML or virDomainDefineXML to launch my qemu VM. However, when I get to check which commands are sent to the qemu commandline, I find that libvirt has added so many extra parameters to the ones I have already set. How can I prevent libvirt from adding any extra parameters to the ones I originally defined in the domain XML? Help will be highly appreciated. Thanks

2 1

[libvirt-users] domain schema fails to validate sysinfo element
by mordenkainen 13 Oct '16

13 Oct '16

I'm puzzled why virt-xml-checker rejects minimal config xml if it includes sysinfo element: <domain type='kvm'> <name>example</name> <sysinfo> </sysinfo> </domain> with the following error: Relax-NG validity error : Extra element sysinfo in interleave minimal.xml:3: element sysinfo: Relax-NG validity error : Element domain failed to validate content minimal.xml fails to validate I tried xmllint it gives the same output

2 1

[libvirt-users] Windows 7 guest not starting with HyperV features enabled
by Aleksei 11 Oct '16

11 Oct '16

Hi, I have a Windows 7 SP1 Pro 64-bit VM which works fine on libvirt 2.3.0 and Qemu 2.7.0. If I enable HyperV features (https://libvirt.org/formatdomain.html#elementsFeatures) like "relaxed", "spinlocks" etc - VM doesn't boot. "Starting Windows" text appears for ~2 seconds (no flying dots, no logo) and then it just goes to black screen. If I switch HyperV features back off, it boots normally again. Running VM with debuggging enabled (virsh --log win7_hyperv.log --debug 1 start win7) doesn't produce any errors in the log. There are no logs for that attempted boot in the guest either - apparently it doesn't get to the point when Windows starts logging. Attaching VM xml definition (with HyperV features enabled). -- /--Regards, Aleksei/

2 1

[libvirt-users] Problems connecting to the libvirtd server
by Stefano Ricci 11 Oct '16

11 Oct '16

Hello everyone I do not know if it is correct address this mailing lists but I can not use libvirt. I run compile libvirt version 2.2.0 into environment lfs stable with qemu 2.7.0 and have not had any problems. The program when it starts not report any errors in the log, with activated debug level file. Only when you try to connect with the following command virsh -c qemu:///system remains hung without reporting any error either in the logs that screen. The command virsh -c test:///default list instead concludes on a regular basis. I attach the file libvirt.log and libvirt.conf Thank you Stefano Ricci

2 1

[libvirt-users] Dealing with swappiness on host systems
by Dennis Jacobfeuerborn 10 Oct '16

10 Oct '16

Hi, I'm looking for a way to prevent qemu processes on a libvirt host to use swap unless there is no physical memory free but apparently this is not as easy as I'd hoped it would be. This is on a CentOS 7 system. At first I tried setting /proc/sys/vm/swappiness to 1 (apparently setting it to 0 now means even the OOM killer takes precedence over swapping: https://www.percona.com/blog/2014/04/28/oom-relation-vm-swappiness0-new-ker… ). After doing this I could still see the used swap increase for a guest even though there were 28G of memory used only as page-cache on the host. Taking another look at it I notices that swappiness can now apparently be controlled on a per-process basis as well by means of using the files under /sys/fs/cgroup/memory/machine.slice however I found no good documentation describing which of the values takes precedence and whether these values can be modified on the fly the same way the files under /proc can. Has anyone pointers to documentation that explains how all of this works? More specifically: Which of these paths take precedence for a running process: /proc/sys/vm/swappiness /sys/fs/cgroup/memory/machine.slice/memory.swappiness /sys/fs/cgroup/memory/machine.slice/<guest-id>/memory.swappiness Can any/all of these values be modified on the fly and if not is there another way to tell qemu to prefer physical memory to swap and only use swap when no physical memory is available? Regards, Dennis

1 0

[libvirt-users] Permission denied for volume create in raw format
by Maciej Nabożny 07 Oct '16

07 Oct '16

Hi, I'm facing similar problem to described here: https://www.redhat.com/archives/libvirt-users/2016-February/msg00033.html I got Libvirt pool mounted over netfs and I'm trying to create new volume, with pool.createXML. When format is qcow2, everything works fine. Unfortunately, for raw images libvirt raises error Permission denied. Whole pool is owned by root. Libvirt starts as root user too. I've tried to change pool's permissions to 777 on filesystem, but i get the same error, only for RAW images. Volume's xml looks like: <volume> <name>{{user.id}}_{{image.id}}</name> <source> </source> <capacity unit='bytes'>{{image.size}}</capacity> <target> <format type='{{ image.format }}'/> <permissions> <mode>660</mode> </permissions> </target> </volume> I've tried to create it without defining permissions, but it's the same. Problem exists in Ubuntu Server 16.04 (libvirt from repo) and Raspbian (libvirt in version 1.2.9). Do you know if it is possible solve this problem with this version of libvirt? -- Maciej Nabożny cloudover.io

2 2

[libvirt-users] Differentiating Disk access from different VMs
by Affan Syed 05 Oct '16

05 Oct '16

All, I have a specific use case where I want to be ale look at vfs or blk_io requests on the host machine and differentiate which VMs the access is originating from. I am assuming a Disk backend, and looking for virsh command or libvirt API that can help me do so. I have tried quite a bit to Google-fu this problem; no such luck. Would love to know if there is some cute trick to do so. Thanks. Affan

2 1