July 2013 - Users - libvirt List Archives

[libvirt-users] How to handle IP-based Networkfilters
by Matthias Babisch 19 Jul '13

19 Jul '13

Hello People. We are currently exploring the possibility to use libvirt and kvm/quemu for production purposes. The general stability seems good enough and the performance is great. There are some issues we do not understand here yet. For security reasons we are considering the extensive use of Networkfilters for virtual machines. But we found some simple scheme for a test-server not to be working as we expected. It might well be that we misunderstand something here, so I am hoping someone could point out to us, where either we or perhaps libvirt failed in this example. We are using an ubuntu 13.04 Server running the provided "1.0.2-0ubuntu11.13.04.2" libvirt-bin using amd64-architecture. The type of VM should not be relevant for this problem. Its a linux-based xmpp-Server which uses ucarp. I reduced the used filter-file just so i could prove my point. It contains: <filter name='linux-based-xmpp-server' chain='root'> <uuid>fb539996-eed5-11e2-8bd3-00e081e0f040</uuid> <rule action='accept' direction='in' priority='999'> <tcp state='NEW' dstportstart='5222'/> </rule> <rule action='accept' direction='in' priority='999'> <tcp state='NEW' dstportstart='5269'/> </rule> <rule action='accept' direction='inout' priority='999'> <ip dstipaddr='224.0.0.18' proto='112'/> </rule> <rule action='reject' direction='inout' priority='999'> <all/> </rule> </filter> Practically it should allow TCP-traffic on Ports 5222,5269 incoming and incoming and outgoing traffic for ip protocol 112 to destination ip 224.0.0.18 (VRRP used by ucarp). All other traffic should be rejected. There is only one VM on the system and the VM has this ruleset attached. Note: It is clear to me that this example won't work as areal world example, because packets of the state ESTABLISHED,RELATED are not allowed through the firewall. I removed these rules because they where in a filter-file i referenced. After reloading the libvirt-bin i do get part of the rules in would expect in iptables: Chain FI-vnet0 (1 references) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain FO-vnet0 (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5222 state NEW ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5269 state NEW REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain HI-vnet0 (1 references) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable What is missing is any reference to the rule for ucarp (protocol 112). Please note though that removing the protocol and just allowing any ip traffic to 224.0.0.18 as a rule, does not appear in the iptables either. Am i misunderstanding anything here? Is there a bug in libvirt? How do you interpret this? Do you know of any other way to achieve the simple ruleset intended? I am hoping to get more information from this list. If you are replying, please cc me (matthias.babisch(a)bmiag.de) because i receive this list as a digest. Sincerely Matthias Babisch IT/Organisation *b+m Informatik AG* Rotenhofer Weg 20 24109 Melsdorf T +49 4340/404-1444 F +49 4340/404-111 M +49 160/8866426 matthias.babisch(a)bmiag.de Aktuelle Informationen unter www.bmiag.de <%5C%22http://www.bmiag.de%5C%22> Die b+m Informatik AG ist ein Unternehmen der Allgeier Gruppe <%5C%22http://www.allgeier-holding.de%5C%22> Vorsitzender des Aufsichtsrates: Dr. Marcus Goedsche Vorstand: Dipl-Ing. Frank Mielke Amtsgericht Kiel, HRB 5526

2 1

[libvirt-users] Hotplug of disk devices in LXC failed with libvirt of version 1.0.2
by hzguanqiang 19 Jul '13

19 Jul '13

Hi Daniel, I noticed that the patch "Add support for hotplug/unplug of disk devices in LXC" you wrote had been merged into libvirt of version 1.0.2. But when I used this function, it report an error with details as following: ubuntu@lxc:~$ vir attach-device instance-0000002c disk.xml --config error: Failed to attach device from disk.xml error: Unable to create device /proc/18377/root/dev/sdb: Permission denied ubuntu@lxc:~$ vir attach-device instance-0000002c disk.xml error: Failed to attach device from disk.xml error: Unable to create device /proc/18377/root/dev/sdb: Permission denied ubuntu@lxc:~$ cat disk.xml <disk type='block' device='disk'> <driver type='raw' cache='none'/> <source dev='/dev/dm-0'/> <target dev='sdb' bus='scsi'/> </disk> ubuntu@lxc:~$ ll /dev/dm-0 brw-rw---- 1 root disk 252, 0 Jul 15 03:39 /dev/dm-0 ubuntu@lxc:~$ dpkg -l|grep libvirt ii libvirt-bin 1.0.2-0ubuntu11 programs for the libvirt library ii libvirt0 1.0.2-0ubuntu11 library for interfacing with different virtualization systems ii python-libvirt 1.0.2-0ubuntu11 libvirt Python bindings And in this lxc vm, through dmesg the following information can be seen: ubuntu@lxc2:~$ dmesg [433287.227288] type=1400 audit(1373874475.861:55): apparmor="DENIED" operation="mknod" info="Failed name lookup" error=-13 parent=1 profile="/usr/sbin/libvirtd" name="dev/sdb" pid=1541 comm="libvirtd" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 What's the real problem and How can I fix it. I really appreciate your help. Thanks! -------------- Best regards! GuanQiang 2013-07-15

3 7

[libvirt-users] Libvirt "tc ingress qdisc" automatically removed by ovs vlan tag setting, how?
by Qiu Yu 18 Jul '13

18 Jul '13

With outbound QoS setting in Libvirt XML, libvirt will add a tc ingress qdisc for traffic shaping. Then if you set VLAN tag to that tap device, this qdisc will automatically gone by no reason. Could anyone shed some lights where should I look into? I'm really confused and got no clue here. Thanks! Steps to reproduce -- # virsh start instance-name # virsh dumpxml instance-name ... <interface type='bridge'> <mac address='fa:16:3e:b9:8f:2a'/> <source bridge='br-int'/> <virtualport type='openvswitch'> <parameters interfaceid='0a2b02ca-4824-4bda-baa9-05fff7a3146d'/> </virtualport> <target dev='tap0a2b02ca-48'/> <model type='virtio'/> <bandwidth> <outbound average='256' peak='512' burst='512'/> </bandwidth> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> ... # tc qdisc ls dev tap0a2b02ca-48 qdisc htb 1: root refcnt 2 r2q 10 default 1 direct_packets_stat 0 qdisc sfq 2: parent 1:1 limit 127p quantum 1514b perturb 10sec qdisc ingress ffff: parent ffff:fff1 ---------------- (<-- already showed up) # ovs-vsctl set port tap0a2b02ca-48 tag=1 # tc qdisc ls dev tap0a2b02ca-48 qdisc htb 1: root refcnt 2 r2q 10 default 1 direct_packets_stat 0 qdisc sfq 2: parent 1:1 limit 127p quantum 1514b perturb 10sec (<-- ingress qdisc is gone) After that, if add this qdisc manually and re-set vlan tag, problem no longer exists. But it can always be reproduced after "virsh destroy / start" cycle. # tc qdisc add dev tap0a2b02ca-48 handle ffff: ingress # ovs-vsctl clear port tap0a2b02ca-48 tag # ovs-vsctl set port tap0a2b02ca-48 tag=1 # tc qdisc ls dev tap0a2b02ca-48 qdisc htb 1: root refcnt 2 r2q 10 default 1 direct_packets_stat 0 qdisc sfq 2: parent 1:1 limit 127p quantum 1514b perturb 10sec qdisc ingress ffff: parent ffff:fff1 ---------------- (<-- still exists) Other information -- # ovs-vsctl --version ovs-vsctl (Open vSwitch) 1.9.2 Compiled May 27 2013 14:19:16 # uname -r 2.6.32-358.111.1.openstack.el6.x86_64 # virsh --version (This is a version I built from libvirt upstream origin/v0.9.11-stable branch) 0.9.11.9 -- Qiu Yu

3 5

[libvirt-users] Cluster discovery using Libvert
by Narendra 16 Jul '13

16 Jul '13

Hello, I'm beginner user of Libvert. I want to find out the nodes (ESX servers) in cluster. I'm using following way but unable to get results. I'm not sure whether I'm using correct command or not. Please help me to achieve the expected result. ========================================================= Virsh # connect esx://192.168.10.1/DatacenterC2/Cluster2?no_verify=1 Enter username for 192.168.10.1 [administrator]: Enter administrator's password for 192.168.10.1: error: Failed to connect to the hypervisor error: invalid argument: Path '/DatacenterC2/Cluster2' does not specify a host system ========================================================= Regards, Narendra

2 1

[libvirt-users] libvrtd-1.1.0 crashes when attempting to start some (but not all) LXC containers
by Dennis Jenkins 15 Jul '13

15 Jul '13

Hello all, I have two issues: 1) I am unable to start a seemingly correct LXC domain (I cloned it from a working domain). 2) I am able to crash "libvirtd" by attempting to start the cloned domain, but starting the original works just fine. I humbly submit that item #2 is a bug - the "libvirtd" daemon should never crash due to anything the "libvirt" client throws at it. As for item #1, I'm not sure where I went wrong. A full walk-through is below (ending with a DIFF of the XML from the two domains). I created by original domain ("dwj-lnx-dev") a long time ago. Today I created the new domain ("dwj-hfax-dev") as follows: 1) Shutdown "dwj-lnx-dev" 2) Clone the root file system: "cd /vm/lxc/; cp -a dwj-lnx-dev dwj-hfax-dev" (2.5GB, ~5 min) 3) "libvirt -c lxc:/// dumpxml dwj-lnx-dev > a.xml" 4) ${EDITOR} a.xml a) changed MAC address, name, memory, source directory for "/" 5) "libvirt -c lxc:/// define a.xml" 6) Edit "/etc/bind/pri/*" and "/etc/dhcp/dhcpd.conf" on my host. It does not matter is "dwj-lnx-dev" is running or not. Any attempt to start "dwj-hfax-dev" will crash libvirtd. In the past I was asked to turn on some debugging and capture a detailed log ( https://www.redhat.com/archives/libvirt-users/2013-May/msg00076.html) I will do this soon and post my results as a follow up. ostara ~ # uname -a Linux ostara 3.8.13-gentoo #1 SMP PREEMPT Mon Jun 3 17:10:56 CDT 2013 x86_64 Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz GenuineIntel GNU/Linux ostara ~ # equery l libvirt * Searching for libvirt ... [IP-] [ ] app-emulation/libvirt-1.1.0-r1:0 ostara ~ # virsh -c lxc:/// version Compiled against library: libvirt 1.1.0 Using library: libvirt 1.1.0 Using API: LXC 1.1.0 Running hypervisor: LXC 3.8.13 ostara ~ # /etc/init.d/libvirtd restart * Caching service dependencies ... [ ok ] * Stopping libvirtd ... * Shutting down network(s): * default [ ok ] * Starting libvirtd ... [ ok ] ostara ~ # virsh -c lxc:/// list --all Id Name State ---------------------------------------------------- - dwj-hfax-dev shut off - dwj-lnx-dev shut off - vm1 shut off ostara ~ # virsh -c lxc:/// start dwj-lnx-dev Domain dwj-lnx-dev started ostara ~ # virsh -c lxc:/// list --all Id Name State ---------------------------------------------------- 9441 dwj-lnx-dev running - dwj-hfax-dev shut off - vm1 shut off ostara ~ # virsh -c lxc:/// start dwj-hfax-dev error: Failed to start domain dwj-hfax-dev error: End of file while reading data: Input/output error error: One or more references were leaked after disconnect from the hypervisor error: Failed to reconnect to the hypervisor ostara ~ # virsh -c lxc:/// list --all error: failed to connect to the hypervisor error: no valid connection error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': Connection refused ostara ~ # ls -l /var/run/libvirt/libvirt-sock srwx------ 1 root root 0 Jul 12 11:21 /var/run/libvirt/libvirt-sock ostara ~ # ps axfw | grep libvirt 9997 pts/2 S+ 0:00 \_ grep --colour=auto libvirt 8446 ? S 0:00 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf 9441 ? Ss 0:00 /usr/libexec/libvirt_lxc --name dwj-lnx-dev --console 19 --security=none --handshake 23 --background --veth veth1 ostara ~ # /etc/init.d/libvirtd restart * Stopping libvirtd ... * start-stop-daemon: no matching processes found [ ok ] * Starting libvirtd ... [ ok ] ostara ~ # ps axfw | grep libvirt 10130 pts/2 S+ 0:00 \_ grep --colour=auto libvirt 8446 ? S 0:00 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf 9441 ? Ss 0:00 /usr/libexec/libvirt_lxc --name dwj-lnx-dev --console 19 --security=none --handshake 23 --background --veth veth1 10033 ? Sl 0:00 /usr/sbin/libvirtd -d --listen ostara ~ # virsh -c lxc:/// list --all Id Name State ---------------------------------------------------- 9441 dwj-lnx-dev running - dwj-hfax-dev shut off - vm1 shut off ostara ~ # virsh -c lxc:/// dumpxml dwj-hfax-dev <domain type='lxc'> <name>dwj-hfax-dev</name> <uuid>681410de-7b56-41bd-b38d-3c66ce97e7b3</uuid> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static'>4</vcpu> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64'>exe</type> <init>/sbin/init</init> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='/vm/lxc/dwj-hfax-dev'/> <target dir='/'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr/portage'/> <target dir='/usr/portage'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr/src'/> <target dir='/usr/src'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/home'/> <target dir='/home'/> </filesystem> <interface type='bridge'> <mac address='82:00:00:00:01:01'/> <source bridge='br0'/> <target dev='veth0'/> </interface> <console type='pty'> <target type='lxc' port='0'/> </console> </devices> <seclabel type='none'/> </domain> ostara ~ # virsh -c lxc:/// dumpxml dwj-lnx-dev <domain type='lxc' id='9441'> <name>dwj-lnx-dev</name> <uuid>fbcd8c3a-9939-12b4-727d-5d3526bc448f</uuid> <memory unit='KiB'>500000</memory> <currentMemory unit='KiB'>500000</currentMemory> <vcpu placement='static'>2</vcpu> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64'>exe</type> <init>/sbin/init</init> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='/vm/lxc/dwj-lnx-dev'/> <target dir='/'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr/portage'/> <target dir='/usr/portage'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr/src'/> <target dir='/usr/src'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/home'/> <target dir='/home'/> </filesystem> <interface type='bridge'> <mac address='82:00:00:00:01:00'/> <source bridge='br0'/> <target dev='veth0'/> </interface> <console type='pty' tty='/dev/pts/3'> <source path='/dev/pts/3'/> <target type='lxc' port='0'/> <alias name='console0'/> </console> </devices> <seclabel type='none'/> </domain> ostara ~ # virsh -c lxc:/// dumpxml dwj-lnx-dev > lnx.xml ostara ~ # virsh -c lxc:/// dumpxml dwj-hfax-dev > hfax.xml ostara ~ # diff lnx.xml hfax.xml 1,6c1,6 < <domain type='lxc' id='9441'> < <name>dwj-lnx-dev</name> < <uuid>fbcd8c3a-9939-12b4-727d-5d3526bc448f</uuid> < <memory unit='KiB'>500000</memory> < <currentMemory unit='KiB'>500000</currentMemory> < <vcpu placement='static'>2</vcpu> --- > <domain type='lxc'> > <name>dwj-hfax-dev</name> > <uuid>681410de-7b56-41bd-b38d-3c66ce97e7b3</uuid> > <memory unit='KiB'>4194304</memory> > <currentMemory unit='KiB'>4194304</currentMemory> > <vcpu placement='static'>4</vcpu> 21c21 < <source dir='/vm/lxc/dwj-lnx-dev'/> --- > <source dir='/vm/lxc/dwj-hfax-dev'/> 37c37 < <mac address='82:00:00:00:01:00'/> --- > <mac address='82:00:00:00:01:01'/> 41,42c41 < <console type='pty' tty='/dev/pts/3'> < <source path='/dev/pts/3'/> --- > <console type='pty'> 44d42 < <alias name='console0'/> (After reseting everything, and attempting to boot hfax with dev offline, libvirtd still crashes) ostara ~ # virsh -c lxc:/// list --all Id Name State ---------------------------------------------------- - dwj-hfax-dev shut off - dwj-lnx-dev shut off - vm1 shut off ostara ~ # virsh -c lxc:/// start dwj-hfax-dev error: Failed to start domain dwj-hfax-dev error: End of file while reading data: Input/output error error: One or more references were leaked after disconnect from the hypervisor error: Failed to reconnect to the hypervisor

2 8

[libvirt-users] OSX: trying to use libvirt 1.1.0 with VirtualBox 4.2
by Brian Candler 15 Jul '13

15 Jul '13

I see that libvirt 1.1.0 should now support virtualbox 4.2, but I'm having problems getting it to work in OSX. I have built it using homebrew, which now has 1.1.0 in its formulae. The error I get when tying to connect is shown below. Any suggestions for where I should look next? The error about "Failed to find user record for uid 'NNNNN'" is odd. libvirtd *is* started automatically, and runs as my own userid (brian, id 502). Each time libvirtd times out, and restarts again, it shows a different uid in this error message. Thanks, Brian. Brians-MacBook-Air:~ $ virsh -c vbox:///session list error: failed to connect to the hypervisor error: no valid connection error: Failed to find user record for uid '32691': Success Brians-MacBook-Air:~ $ virsh -V Virsh command line tool of libvirt 1.1.0 See web site at http://libvirt.org/ Compiled with support for: Hypervisors: VMWare VirtualBox ESX Test Networking: Remote Storage: Dir SCSI Miscellaneous: Daemon Secrets Debug Readline Modular Brians-MacBook-Air:~ $ LIBVIRT_DEBUG=1 virsh -c vbox:///session list 2013-07-14 20:18:52.004+0000: 18446744073709551615: info : libvirt version: 1.1.0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virGlobalInit:436 : register drivers 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e39fa58 name=Test 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering Test as driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterNetworkDriver:609 : registering Test as network driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterInterfaceDriver:636 : registering Test as interface driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterStorageDriver:663 : registering Test as storage driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterNodeDeviceDriver:690 : registering Test as device driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterSecretDriver:717 : registering Test as secret driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterNWFilterDriver:744 : registering Test as network filter driver 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e3a10e8 name=VMWARE 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering VMWARE as driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e3a16e0 name=ESX 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering ESX as driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterInterfaceDriver:636 : registering ESX as interface driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNetworkDriver:609 : registering ESX as network driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterStorageDriver:663 : registering ESX as storage driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNodeDeviceDriver:690 : registering ESX as device driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterSecretDriver:717 : registering ESX as secret driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNWFilterDriver:744 : registering ESX as network filter driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e3a0420 name=remote 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering remote as driver 3 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNetworkDriver:609 : registering remote as network driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterInterfaceDriver:636 : registering remote as interface driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterStorageDriver:663 : registering remote as storage driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNodeDeviceDriver:690 : registering remote as device driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterSecretDriver:717 : registering remote as secret driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNWFilterDriver:744 : registering remote as network filter driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventRegisterDefaultImpl:230 : registering default event implementation 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollAddHandle:111 : Used 0 handle slots, adding at least 10 more 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollInterruptLocked:712 : Skip interrupt, 0 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=1 fd=4 events=1 cb=0x10e1b313f opaque=0x0 ff=0x0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventRegisterImpl:203 : addHandle=0x10e1b1b1b updateHandle=0x10e1b1df6 removeHandle=0x10e1b1f2d addTimeout=0x10e1b2064 updateTimeout=0x10e1b2212 removeTimeout=0x10e1b2385 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virConnectOpenAuth:1446 : name=vbox:///session, auth=0x10e39f940, flags=0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c45d60 classname=virConnect 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630d00050 classname=virConnectCloseCallbackData 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=1 timeout=-1 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1158 : name "vbox:///session" to URI components: scheme vbox server (null) user (null) port 0 path /session 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 0 (Test) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1211 : driver 0 Test returned DECLINED 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 1 (VMWARE) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1211 : driver 1 VMWARE returned DECLINED 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 2 (ESX) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1211 : driver 2 ESX returned DECLINED 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 3 (remote) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : remoteConnectOpen:978 : Auto-spawn user daemon instance 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : doRemoteOpen:590 : proceeding with name = vbox:///session 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : doRemoteOpen:599 : Connecting with transport 1 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : doRemoteOpen:688 : Proceeding with sockname /Users/brian/.cache/libvirt/libvirt-sock 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetSocketNew:155 : localAddr=0x7fff6dd47340 remoteAddr=0x7fff6dd472b0 fd=6 errfd=-1 pid=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c465d0 classname=virNetSocket 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetSocketNew:205 : RPC_SOCKET_NEW: sock=0x7fa630c465d0 fd=6 errfd=-1 pid=0 localAddr=127.0.0.1;0, remoteAddr=127.0.0.1;0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c46440 classname=virNetClient 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetClientNew:326 : RPC_CLIENT_NEW: client=0x7fa630c46440 sock=0x7fa630c465d0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46440 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c465d0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=2 fd=6 events=1 cb=0x10e28e43e opaque=0x7fa630c465d0 ff=0x10e28e489 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virKeepAliveNew:196 : client=0x7fa630c46440, interval=-1, count=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630d004d0 classname=virKeepAlive 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virKeepAliveNew:215 : RPC_KEEPALIVE_NEW: ka=0x7fa630d004d0 client=0x7fa630c46440 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46440 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630d00050 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c467b0 classname=virNetClientProgram 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c46210 classname=virNetClientProgram 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c46240 classname=virNetClientProgram 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c467b0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46210 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46240 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : doRemoteOpen:805 : Trying authentication 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=1 w=2, f=6 e=1 d=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetMessageNew:46 : msg=0x7fa630d00450 tracked=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetMessageEncodePayload:383 : Encode length as 28 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=2 timeout=-1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetClientSendInternal:1959 : RPC_CLIENT_MSG_TX_QUEUE: client=0x7fa630c46440 len=28 prog=536903814 vers=1 proc=66 type=0 status=0 serial=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetClientCallNew:1912 : New call 0x7fa630d00570: msg=0x7fa630d00450, expectReply=1, nonBlock=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIO:1719 : Outgoing message prog=536903814 version=1 serial=0 proc=66 type=0 length=28 dispatch=0x0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIO:1778 : We have the buck head=0x7fa630d00570 call=0x7fa630d00570 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=2 events=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 2 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=1 w=2, f=6 e=0 d=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=1 timeout=-1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetMessageDecodeLength:153 : Got length, now need 192 total (188 more) 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientCallDispatch:1126 : RPC_CLIENT_MSG_RX: client=0x7fa630c46440 len=192 prog=536903814 vers=1 proc=66 type=1 status=1 serial=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virKeepAliveCheckMessage:374 : ka=0x7fa630d004d0, client=0x7fa630c46440, msg=0x7fa630c464c0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetMessageClear:57 : msg=0x7fa630c464c0 nfds=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1425 : Giving up the buck 0x7fa630d00570 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1439 : No thread to pass the buck to 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=2 events=1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIO:1808 : All done with our call head=0x0 call=0x7fa630d00570 rv=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetMessageFree:74 : msg=0x7fa630d00450 nfds=0 cb=0x0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c467b0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46210 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46240 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientCloseInternal:686 : client=0x7fa630c46440 wantclose=0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientMarkClose:632 : client=0x7fa630c46440, reason=3 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollRemoveHandle:193 : mark delete 1 6 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollInterruptLocked:712 : Skip interrupt, 0 4537835520 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1425 : Giving up the buck 0x0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1439 : No thread to pass the buck to 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientCloseLocked:645 : client=0x7fa630c46440, sock=0x7fa630c465d0, reason=3 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupHandles:577 : EVENT_POLL_PURGE_HANDLE: watch=2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virKeepAliveStop:307 : RPC_KEEPALIVE_STOP: ka=0x7fa630d004d0 client=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630d004d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630d004d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetSocketDispose:1004 : RPC_SOCKET_DISPOSE: sock=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virKeepAliveDispose:227 : RPC_KEEPALIVE_DISPOSE: ka=0x7fa630d004d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virFileClose:90 : Closed fd 6 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientDispose:598 : RPC_CLIENT_DISPOSE: client=0x7fa630c46440 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630d00050 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c467b0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c467b0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=1 timeout=-1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46210 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c46210 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46240 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c46240 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virFileClose:90 : Closed fd 8 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virFileClose:90 : Closed fd 7 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virNetMessageClear:57 : msg=0x7fa630c464c0 nfds=0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : do_open:1211 : driver 3 remote returned ERROR 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c45d60 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c45d60 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630d00050 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630d00050 error: failed to connect to the hypervisor error: no valid connection error: Failed to find user record for uid '32691': Success 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollAddTimeout:225 : Used 0 timeout slots, adding at least 10 more 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollAddTimeout:248 : EVENT_POLL_ADD_TIMEOUT: timer=1 frequency=0 cb=0x10e14d03f opaque=0x0 ff=0x0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:448 : EVENT_POLL_DISPATCH_TIMEOUT: timer=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollRemoveTimeout:300 : EVENT_POLL_REMOVE_TIMEOUT: timer=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollInterruptLocked:712 : Skip interrupt, 0 4537835520 Brians-MacBook-Air:~ $ Here's the output from the configure step (using brew install -v) configure: configure: Configuration summary configure: ===================== configure: configure: Drivers configure: configure: Xen: no configure: QEMU: no configure: UML: no configure: OpenVZ: no configure: VMware: yes configure: VBox: yes configure: XenAPI: no configure: xenlight: no configure: LXC: no configure: PHYP: no configure: ESX: yes configure: Hyper-V: no configure: Parallels: no configure: Test: yes configure: Remote: yes configure: Network: no configure: Libvirtd: yes configure: Interface: no configure: macvtap: no configure: virtport: no configure: configure: Storage Drivers configure: configure: Dir: yes configure: FS: no configure: NetFS: no configure: LVM: no configure: iSCSI: no configure: SCSI: yes configure: mpath: no configure: Disk: no configure: RBD: no configure: Sheepdog: no configure: configure: Security Drivers configure: configure: SELinux: no () configure: AppArmor: no configure: configure: Driver Loadable Modules configure: configure: dlopen: configure: configure: Libraries configure: configure: apparmor: no configure: attr: no configure: audit: no configure: avahi: no configure: blkid: no configure: capng: no configure: curl: yes (CFLAGS='-DCURL_DISABLE_TYPECHECK ' LIBS='-lcurl ') configure: dbus: no configure: fuse: no configure: hal: no configure: netcf: no configure: numactl: no configure: openwsman: no configure: pciaccess: no configure: sanlock: no configure: sasl: yes (CFLAGS='' LIBS='-lsasl2') configure: selinux: no configure: ssh2: no configure: udev: no configure: yajl: yes (CFLAGS='' LIBS='-lyajl') configure: libxml: -I/usr/include/libxml2 -lxml2 configure: dlopen: configure: openwsman: no configure: gnutls: -I/usr/local/Cellar/libtasn1/3.3/include -I/usr/local/Cellar/p11-kit/0.18.1/include/p11-kit-1 -I/usr/local/Cellar/gnutls/3.1.10/include -DGCRYPT_NO_DEPRECATED -L/usr/local/Cellar/gnutls/3.1.10/lib -lgnutls -lgcrypt configure: firewalld: no configure: polkit: no configure: xen: no configure: xenapi: no configure: xenlight: no configure: pcap: no configure: nl: no configure: mscom: no configure: xdr: configure: rbd: no configure: configure: Test suite configure: configure: Coverage: no configure: Alloc OOM: no configure: configure: Miscellaneous configure: configure: Debug: yes configure: Use -Werror: no configure: Warning Flags: -W -Waddress -Wall -Warray-bounds -Wattributes -Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wcomment -Wcomments -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wempty-body -Wendif-labels -Wextra -Wformat-extra-args -Wformat-security -Wformat-y2k -Wformat-zero-length -Wformat=2 -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast -Winvalid-pch -Wmain -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-format-attribute -Wmissing-include-dirs -Wmissing-noreturn -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wold-style-definition -Woverflow -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wreturn-type -Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wswitch -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvariadic-macros -Wvolatile-register-var -Wwrite-strings -Wno-missing-field-initializers -Wno-sign-compare -Wno-format-nonliteral -Wframe-larger-than=4096 -fexceptions -fasynchronous-unwind-tables -fdiagnostics-show-option -funit-at-a-time configure: Readline: yes configure: Python: yes configure: DTrace: no configure: numad: no configure: XML Catalog: /etc/xml/catalog configure: Init script: none configure: Char device locks: no configure: configure: Privileges configure: configure: QEMU: root:root configure: If I run libvirtd by itself manually with the -v flag, this is all I get: Brians-MacBook-Air:~ $ /usr/local/Cellar/libvirt/1.1.0/sbin/libvirtd -v 2013-07-14 20:26:14.853+0000: 18446744073709551615: info : libvirt version: 1.1.0 2013-07-14 20:26:14.853+0000: 18446744073709551615: error : virGetUserEnt:696 : Failed to find user record for uid '32704': Success All entries in /usr/local/etc/libvirt/libvirtd.conf are commented out.

1 0

[libvirt-users] ★ Libvirt Users, Rene Bon Ciric te ha dejado un mensaje
by Badoo 13 Jul '13

13 Jul '13

Rene Bon Ciric te ha dejado un mensaje Este mensaje es personal. Sólo tú y su remitente tenéis acceso a él y te recordamos que lo puedes eliminar en cualquier momento. Si quieres responder puedes hacerlo desde el chat. Para leer tu mensaje, haz clic en el siguiente enlace: http://us1.badoo.com/renich/in/l-47pIIAagA/?lang_id=7&g=57&m=21&mid=51e1403… Otras personas de tu zona están en Badoo Marioo (Guadalajara, México) Angela (Guadalajara, México) http://us1.badoo.com/renich/in/l-47pIIAagA/?lang_id=7&g=57&m=21&mid=51e1403… Si al hacer clic en el enlace de este mensaje no funciona, copia y pégalo en la barra de tu navegador. Este email es parte del proceso de entrega del mensaje enviado por Rene Bon Ciric. Si has recibido este email por error, por favor ignóralo. En un breve periodo de tiempo será eliminado del sistema. ¡Divértete! El Equipo de Badoo Has recibido este email de Badoo Trading Limited (dirección postal a continuación). Si no desea recibir futuras comunicaciones por parte de Badoo, haz clic aquí para desactivarlas: https://us1.badoo.com/impersonation.phtml?lang_id=7&email=libvirt-users%40r… Badoo Trading Limited es una sociedad de responsabilidad limitada registrada en Inglaterra y Gales con número 7540255 y domicilio en Media Village, 131 - 151 Great Titchfield Street, Londres, W1W 5BB.

1 0

[libvirt-users] Permission problem with /dev/net/tun
by Thomas Karcher 11 Jul '13

11 Jul '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi lxc folks, the symptom my libvirt LXC container suffers from is: root@depot:/dev/net# ls -la total 0 drwxr-xr-x 2 root root 40 Jun 29 16:26 . drwxr-xr-x 5 root root 480 Jun 29 16:26 .. root@depot:/dev/net# mknod tun c 10 200 mknod: `tun': Operation not permitted The host is an up-to-date AMD64 Ubuntu raring on 3.8.0-25-generic that was formerly installed from precise and then upgraded. The guest is Ubuntu precise; however, I see the same symptom in another raring container on the same host. What I tried to resolve this: 1) On the host, I echoed various stuff to the cgroup device files: cd /sys/fs/cgroup/devices/libvirt/lxc echo "c 10:200 rwm" > devices.allow echo "c 10:200 rwm" > depot/devices.allow echo a > depot/devices.allow ... and I see the successful results in depot/devices.list, but no success. 2) I inserted a line "/dev/net/tun rwk," into /etc/apparmor.d/abstractions/lxc/container-base - no change. (I know, it seems kind of pointless - because it's about permissions to a device, not a path. You may deduce my desperation from this ... SELinux is not active. Mounts on /dev look normal to me: devfs on /dev type tmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) devpts on /dev/ptmx type devpts (rw,nosuid,relatime,gid=5,mode=620,ptmxmode=666) cgroup on /sys/fs/cgroup/devices type cgroup (rw,relatime,devices) Now comes the weird part: Once I umount /dev inside the container, the "hidden" /dev appears which contains a usable /dev/net/tun. So the mknod problem is probably due to the dropped capabilities - but why/how mounts the container a more restricted /dev on top of the prepared one ...? Thanks & regards Thomas -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlHYdysACgkQiMyIQtYO79yUMQCfUrbaAWcZsqYkopRL6F2evWdq XnMAoOq6/wopgBGZniWDGnIiYBEsFX61 =BIr9 -----END PGP SIGNATURE-----

3 8

[libvirt-users] guests not shutting down when host shuts down
by Lentes, Bernd 11 Jul '13

11 Jul '13

Hi, i have a SLES 11 SP2 64bit host with three guests: - Windows XP 32 - Ubuntu 12.04 LTS 64bit - SLES 11 SP2 64bit The SLES guest shuts down with the host shutdown. The others not. When i shutdown these two guests with the virt-manager, they shutdown fine. ACPI is activated in virt-manager for both of them. Acpid is running in the Ubuntu Client. When the host shuts down, the two guests get a signal (excerpt from the log of the host:) =========================================================== 2013-07-07 16:39:51.674: starting up LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -S -M pc-0.15 -enable-kvm -m 1025 -smp 1,sockets=1,cores=1,threads=1 -name greensql_2 -uuid 2cfbac9c-dbb2-c4bf-4aba-2d18dc49d18e -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/greensql_2.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/kvm/images/greensql_2/disk0.raw,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=17,id=hostnet0,vhost=on,vhostfd=20 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:37:92:a9,bus=pci.0,addr=0x3 -usb -vnc 127.0.0.1:2 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Domain id=3 is tainted: high-privileges qemu: terminating on signal 15 from pid 24958 2013-07-08 13:58:29.651: starting up ========================================================== I'm a bit astonished about "no-shutdown" in the commandline, but the sles guest also has it in its commandline, so it should not bother. I'm using kvm-0.15.1-0.23.1, libvirt-client-0.9.6-0.23.1, libvirt-0.9.6-0.23.1 and virt-manager-0.9.0-3.19.1 in the host. Thanks for any help. Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg Wer nichts verdient außer Geld verdient nichts außer Geld Helmholtz Zentrum München Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH) Ingolstädter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir´in Bärbel Brumme-Bothe Geschäftsführer: Prof. Dr. Günther Wess Dr. Nikolaus Blum Dr. Alfons Enhsen Registergericht: Amtsgericht München HRB 6466 USt-IdNr: DE 129521671

2 4

[libvirt-users] Connect issue - libvirt.dylib
by Utpal Das 11 Jul '13

11 Jul '13

Hi All, I am trying to use libvirt to connect to hypervisor. I need some help with this. 1. I am using mac os - Mountain Lion. 2. I have installed libvirt using macports. 3. I am able to connect to the vcenter server using virsh tool. 4. However i am not able to connect using libvirt java program. The issue it seems that virt library cannot be found. (Sample output attached). The question is how do i get libvirt.dylib on my mac. Any pointers would be really helpful Re, Utpal Exception in thread "main" java.lang.UnsatisfiedLinkError: Unable to load library 'virt': Native library (darwin/libvirt.dylib) not found in resource path

1 0

Re: [libvirt-users] Libvirt and Glusterfs
by Vijay Bellur 10 Jul '13

10 Jul '13

> Hi, > > I'm trying to use qemu native glusterfs integration with libvirt. It's > all working well from the qemu side, but libvirt fails to start a domain > with a gluster drive or attach a drive. > I have exactly the same error as this person: > https://www.redhat.com/archives/libvirt-users/2013-April/msg00204.html > > I use qemu 1.5.1 with glusterfs 3.4 beta 4 and libvirt 1.0.6. > > [root bbox ~]# virsh start test > error: Failed to start domain test > error: internal error process exited while connecting to monitor: char > device redirected to /dev/pts/3 (label charserial0) > qemu-system-x86_64: -drive > file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw: > Gluster connection failed for server=127.0.0.1 port=0 volume=vol0 > image=test0.img transport=tcp > qemu-system-x86_64: -drive > file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw: > could not open disk image gluster://127.0.0.1/vol0/test0.img: No data > available > Do you observe errors in the logs from gluster bricks that make up vol0? Brick logs are available at /var/log/glusterfs/bricks. Thanks, Vijay

2 3

[libvirt-users] python equiv to perl list_domains()
by Brett Y 10 Jul '13

10 Jul '13

Hey, I'm trying to figure out a way to get a list of the running domains on a dom0. I can get the ID's but I'd prefer the names. We have another script written in perl, but I'm trying to get some other functionality in python as well as work on converting it all to python. It looks like perl has a list_domains() that will, according to the libvirt doc, "Return a list of all running domains currently known to the VMM". And this works for us, but I can't get the same thing in python as listAllDomains doesn't work with the version of libvirt running on RHEL 5.9 >From our machine that will be running the script RHEL 5.9 yum list | grep libvirt libvirt.x86_64 0.8.2-29.el5_9.1 libvirt-python.x86_64 0.8.2-29.el5_9.1 from the dom0 RHEL 5.9 yum list | grep xen xen.x86_64 3.0.3-142.el5_9.2 xen-libs.i386 3.0.3-142.el5_9.2 xen-libs.x86_64 3.0.3-142.el5_9.2 yum list | grep libvirt libvirt.i386 0.8.2-29.el5_9.1 installed libvirt.x86_64 0.8.2-29.el5_9.1 installed This is the error if I try to do listAllDomains from a FC18 box >>> conn.listAllDomains(1) libvir: Remote Driver error : unknown procedure: 273 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3695, in listAllDomains raise libvirtError("virConnectListAllDomains() failed", conn=self) libvirt.libvirtError: unknown procedure: 273

2 1

[libvirt-users] Unable to allocate multiple vcpus using virt-install
by Peeyush Gupta 09 Jul '13

09 Jul '13

I am trying to run a VM on Ubuntu 12.04 which in turn is guest on Fedora 18 host. I am using qemu, kvm and libvirt. I tried to run the following command: virt-install --name dsl --ram 1024 --vcpus 2 --cdrom /home/peeyush/Downloads/some_iso_file.iso --disk path=/path_to_disk My machine here runs with only one vcpu. While when I tried the exact same thing on my Fedora 18 host, it shows two cpus. What am I doing wrong? Thanks. ~Peeyush Gupta

1 0

[libvirt-users] Xen + libvirt: VM name 'Domain-Unnamed' already exists
by Postmaster - Aton Tech 09 Jul '13

09 Jul '13

I had to restart a paravirt guest and could not start over again. It's a xenstore crash? Compiled against library: libvirt 1.0.3 Using library: libvirt 1.0.3 Usando a API: Xen 1.0.3 Hypervisor em execução: Xen 4.2.0 CentOS 6 - x64 Linux eagle 3.9.8-1.el6xen.x86_64 #1 SMP Sat Jun 29 16:23:39 EST 2013 x86_64 x86_64 x86_64 GNU/Linux I've got this error: ... [07.08.2013 08:21:45 3322] INFO (XendDomainInfo: 169) Recreating domain 13, UUID 0a1ddba3-c1d7-5675-9e5d-1b79d02b5ea2. at / local/domain/13 [07.08.2013 08:21:45 3322] WARNING (XendDomainInfo: 191) / vm/0a1ddba3-c1d7-5675-9e5d-1b79d02b5ea2/uuid / is missing. recreate is confused, trying our best to recover [07.08.2013 08:21:45 3322] ERROR (XendDomain: 447) Unable to recreate domain Traceback (most recent call last): File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomain.py", line 445, in _refreshTxn new_dom XendDomainInfo.recreate = (dom, False) File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 204, in recreate vmpath = vmpath) File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 455, in __ init__ self._checkName (self.info ['name_label']) File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 3524, in _checkName ("The domain% s"% str (dom.domid)) or "")) VmError: VM name 'Domain-Unnamed' already exists ...

1 0

[libvirt-users] deadlock on connection loosing
by Александр 09 Jul '13

09 Jul '13

libvirtd will lock if for example kill programm which established connection, only sigkill + restart helps., to reproduce: virConnectPtr libvirt_connection = virConnectOpen("qemu:///system"); if(libvirt_connection == NULL) { std::cout<<"failed to connect to qemu:///system\n"; exit(-1); } exit(0);

2 7

[libvirt-users] Custom Live Migration Query
by Aaron Clausen 09 Jul '13

09 Jul '13

I'm using KVM, libvirt and DRBD to come up with a custom mirroring and live migration setup. I have two servers, each running KVM and libvirt, and both using DRBD to mirror guests (which are stored on raw DRBD partitions). If I shut down a guest on one, I can easily get it up and running on the other without issue. I have run into some file system corruption trouble if I try to do a live migration. I have a test script just to test out the bare functionality I'm looking for (this script would run on the second KVM server; kvmserv02): #!/bin/sh if virsh -c qemu+ssh://kvmserv01/system list | grep -q " guest "; then echo "Saving state on remote server..." if ! virsh -c qemu+ssh://kvmserv01/system save guest --running ~/guest.save; then echo "Could not save state of guest" exit 1 fi echo "Setting remote drbd node to secondary..." if ! ssh root@kvmserv01 "drbdadm secondary guest"; then echo "Could not change remote host to secondary for guest's DRBD partition" exit 1 fi sleep 5 echo "Setting local drbd node to primary..." if ! drbdadm primary guest; then echo "Could not change this host to primary for guest's DRBD partition" exit 1 fi sleep 5 echo "Restoring state on local server..." if ! virsh restore ~/guest.save --running; then echo "Could not restore guest state" exit 1 fi echo "Deleting state file on local server..." rm -f ~/guest.save else echo 'guest not running on this host' fi # End of script While the state is restored and the guest comes up on the second server, I end up with filesystem corruptions. My first test guest had its file system pretty heavily damaged after a few moves back and forth. What am I missing here? Or is this just simply a really horrible way to do it? -- Aaron Clausen mightymartianca(a)gmail.com

1 0

[libvirt-users] Libvirt and Glusterfs
by Olivier Mauras 07 Jul '13

07 Jul '13

Hi, I'm trying to use qemu native glusterfs integration with libvirt. It's all working well from the qemu side, but libvirt fails to start a domain with a gluster drive or attach a drive. I have exactly the same error as this person: https://www.redhat.com/archives/libvirt-users/2013-April/msg00204.html [1] I use qemu 1.5.1 with glusterfs 3.4 beta 4 and libvirt 1.0.6. [root@bbox ~]# virsh start test error: Failed to start domain test error: internal error process exited while connecting to monitor: char device redirected to /dev/pts/3 (label charserial0) qemu-system-x86_64: -drive file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw: Gluster connection failed for server=127.0.0.1 port=0 volume=vol0 image=test0.img transport=tcp qemu-system-x86_64: -drive file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw: could not open disk image gluster://127.0.0.1/vol0/test0.img: No data available Using this command to run qemu directly works like a charm: [root@bbox ~]# qemu-system-x86_64 -name test -machine pc-i440fx-1.5,accel=kvm,usb=off -m 8G -smp 1,maxcpus=4 -drive file=/pool/st01/test_1.img,if=none,id=drive-virtio-disk0,format=raw -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk1,id=virtio-disk1 -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -monitor stdio -qmp unix:/tmp/qmp-sock,server,nowait Image has been created using qemu-img. [root@bbox ~]# qemu-img info gluster://127.0.0.1/vol0/test0.img image: gluster://127.0.0.1/vol0/test0.img file format: raw virtual size: 10G (10737418240 bytes) disk size: 341K Everything is run as root, libvirtd daemon as well. Running libvirtd in debug mode doesn't seem to log more relevant informations than the virsh error. Has anyone been able to use glusterfs disks with livbirt ?? Any help appreciated, -O. Links: ------ [1] https://www.redhat.com/archives/libvirt-users/2013-April/msg00204.html

1 0

[libvirt-users] libvirt & virtio_net - host.freeze@reset.domain
by poma 05 Jul '13

05 Jul '13

Hello people, libvirtd (libvirt) 1.0.5.2 virsh 1.0.5.2 virt-manager 0.10.0 Host: Linux localhost 3.9.8-300.fc19.x86_64 #1 SMP Thu Jun 27 19:24:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Guest1: Linux localhost 3.9.8-300.fc19.i686.PAE #1 SMP Thu Jun 27 19:29:30 UTC 2013 i686 (none) Guest2: Linux localhost 3.9.8-300.fc19.x86_64 #1 SMP Thu Jun 27 19:24:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Virtual NIC - source & model: macvtap/NAT/bridge & virtio(virtio_net) Host freeze at "virsh reset <domain>" or "virt-manager - Force Reset" Need kernel.sysrq or power reset. poma

2 3

[libvirt-users] Libvirt, virtmanager & Windows 7 installation partition
by Roland Giesler 05 Jul '13

05 Jul '13

I need to use an existing windows 7 installation in a virtual machine form a libvirt host running Ubuntu 12.10. Windows 7 installs on two partitions. There a 100MB boot partitiona and then the main partition for the installation. If I boot the laptop (which dual boots), I can select Windows 7 and boot it just fine, or alternative Ubuntu. If I select /dev/sda1 in the virtmanager as the source path I can see dis activity, but in the VM window the "booting from hard disk..." text never does away. If I select /dev/sda2 (where the windows installation resides (and which is not marked as bootable), I get a boot failure right away. Here is what /var/log/syslog has: Jul 4 22:11:02 Matt-HP ntfs-3g[8385]: Version 2012.1.15AR.5 external FUSE 29 Jul 4 22:11:02 Matt-HP ntfs-3g[8385]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1) Jul 4 22:11:02 Matt-HP ntfs-3g[8385]: Cmdline options: rw,nosuid,nodev,uhelper=udisks2,uid=1001,gid=1001,dmask=0077,fmask=0177 Jul 4 22:11:02 Matt-HP ntfs-3g[8385]: Mount options: rw,nosuid,nodev,uhelper=udisks2,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sda2,blkdev,blksize=4096 Jul 4 22:11:02 Matt-HP ntfs-3g[8385]: Global ownership and permissions enforced, configuration type 7 Jul 4 22:11:02 Matt-HP udisksd[2569]: Mounted /dev/sda2 at /media/roland/BE26AE8326AE3C71 on behalf of uid 1001 Jul 4 22:12:31 Matt-HP kernel: [15366.356259] audit_printk_skb: 48 callbacks suppressed Jul 4 22:12:31 Matt-HP kernel: [15366.356265] type=1400 audit(1372968751.291:34): apparmor="STATUS" operation="profile_load" name="libvirt-c6a90ff5-9849-2ec5-fc8e-a331b144ceff" pid=8540 comm="apparmor_parser" Jul 4 22:12:31 Matt-HP kernel: [15366.584252] device vnet0 entered promiscuous mode Jul 4 22:12:31 Matt-HP kernel: [15366.588663] virbr0: topology change detected, propagating Jul 4 22:12:31 Matt-HP kernel: [15366.588669] virbr0: port 1(vnet0) entered forwarding state Jul 4 22:12:31 Matt-HP kernel: [15366.588685] virbr0: port 1(vnet0) entered forwarding state Jul 4 22:12:31 Matt-HP kernel: [15366.588963] IPv6: ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready Jul 4 22:12:31 Matt-HP NetworkManager[986]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/vnet0, iface: vnet0) Jul 4 22:12:31 Matt-HP NetworkManager[986]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/vnet0, iface: vnet0): no ifupdown configuration found. Jul 4 22:12:32 Matt-HP NetworkManager[986]: <warn> /sys/devices/virtual/net/vnet0: couldn't determine device driver; ignoring... Jul 4 22:12:33 Matt-HP avahi-daemon[935]: Joining mDNS multicast group on interface vnet0.IPv6 with address fe80::fc54:ff:fe8a:8f93. Jul 4 22:12:33 Matt-HP avahi-daemon[935]: New relevant interface vnet0.IPv6 for mDNS. Jul 4 22:12:33 Matt-HP avahi-daemon[935]: Registering new address record for fe80::fc54:ff:fe8a:8f93 on vnet0.*. Is there anything that I can learn from this log? What could I do to make this work. Dual booting it not an option in this case. regards Roland Giesler +27 (0)72-450-2817 http://www.giesler.za.net Disclaimer: The sender invokes the rule of "exemptus responsibilitus" pertaining to caffeine soluted inductions and/or decantations thereof into tactile communication interfaces and alternative apparatuses with respect to personal computation devices or otherwise implementations of electronic and/or bionic devices. This impartation is intended for the addressed party, unless conditions contrary to the aforementioned exist, in which case it is pertinent. Reduce without further ado to nothingness said impartation; alternatively "refrain from traversing the point of origination, be not enriched by 200 Randus and proceed without delay to enjailment".

2 2

[libvirt-users] access remote libvirtd fail
by yd c 05 Jul '13

05 Jul '13

I want to manage remote libvirt , have run libvirtd in the dest host : [root@dest_host ~]# ps aux | grep libvirtd root 3293 0.0 0.1 923796 5856 ? Sl 12:59 0:00 libvirtd --daemon then I use the command in source host : 1. [root@source_host ~]# ssh -l root 211.87.***.97 ## login the dest host 2. [root@dest_host ~]# virsh -c qemu+ssh://127.0.0.1/system list --all # query vm status output: Id Name State ---------------------------------------------------- - ubuntu shut off - vdisk shut off also I use the command in source host 1. [root@source_host ~]# ssh -l root 211.87.***.97 ## login the dest host 2. [root@dest_host ~]# virsh -c qemu+ssh://211.87.***.97/system list --all ### query vm status output: Id Name State ---------------------------------------------------- - ubuntu shut off - vdisk shut off however , in the source host , execute the command : 1. [root@source_host ~]# virsh -c qemu+ssh://211.87.228.97/system list --all ### query vm status output: error: failed to connect to the hypervisor error: no valid connection error: End of file while reading data: : Input/output error I have referred to http://wiki.libvirt.org/page/Failed_to_connect_to_the_hypervisor#Other_erro… , http://wiki.libvirt.org/page/SSHSetup and http://wiki.libvirt.org/page/SSHPolicyKitSetup . All of them don't work. how should I do ? Help .

1 0

[libvirt-users] best way to provide disk storage for vm without shared storage system
by Vasiliy Tolstov 04 Jul '13

04 Jul '13

Hello. I'm very happy with libvirt and qemu, that great software! (after some playing i want to create golang bindings to libvirt).. Now i provide ext4 fs for qcow2 images (raid1 with two sata disks). Now i don't need live migration (but may need it in feature). What is the best way to provide disks to vm in case of performance, ability to create backups (i don't want lvm snapshots)? As i search from google more speed can take physical storage - lvm. But may be QED or FVD can provide near lvm performance to me? -- Vasiliy Tolstov, e-mail: v.tolstov(a)selfip.ru jabber: vase(a)selfip.ru

2 1

[libvirt-users] F19 and virt-install
by Jay Vyas 04 Jul '13

04 Jul '13

Hi libvirt: -------- My "short" question is - is there a recipe for installing F19 100% automatically with static IPs? I'm using a combination of url based install with a kickstart script pasted to a gist in order to bootstrap the entire thing. It **used** to work (fedora16), but recently stopped. ------- Note : Right now Im not using the os-variant switch because fedora17+ arent listed as OS variant's in my version of virt-install. That in and of itself could be the problem -- any way to update virt-install's os-variant list? ------ With Fedora 16, I found that the url based install failed due to a corrupt rpm. I assume this is just because f16 isn't supported anymore so errors on the web site for it are not being fixed. With Fedora 18/19/... Im finding other types of errors related to missing downloaded components when the bootstrapping virt-install starts. In particular, a 404 (not found) error when fetching " product.img " from the OS url. Details below. <note, any insights into things I may be missing due to ignorance would also be appreciated here> -------- With Fedora 18: I've noticed that libvirt gives me some errors with the new generation of fedora formatted os's source directories. It looks for a file "product.img", which (I beleive) doesnt exist in fedora17+. In particular, it is looking for the "product.img" file, under http://redhat.download.fedoraproject.org/pub/fedora/linux/releases/19/Fedor… . virt-install --hvm --name f18x86_64a --ram 1024 --file /var/lib/libvirt/images/f18x86_64a.img,size=20 --location http://www.mirrorservice.org/sites/dl.fedoraproject.org/pub/fedora/linux/re… 20 -x "ks=<url_to_kickstart_file>" ------- Running "virt-install list", it seems that the only fedoras known to virt-install are up to fedora16: fedora16 : Fedora 16 fedora15 : Fedora 15 fedora14 : Fedora 14 fedora13 : Fedora 13 fedora12 : Fedora 12 fedora11 : Fedora 11 fedora10 : Fedora 10 fedora9 : Fedora 9 fedora8 : Fedora 8 fedora7 : Fedora 7 fedora6 : Fedora Core 6 fedora5 : Fedora Core 5 ------- Do I need to update virt-install in order to install F17+ from source? How is the os-variant used? Im assuming maybe os-variant needs to be updated somehow in order for the virt-install command to behave correctly. -- Jay Vyas http://jayunit100.blogspot.com

1 0

[libvirt-users] VM destroy faiing in 1.0.1
by Chandrashekhar Jamadarkhani (cjamadar) 04 Jul '13

04 Jul '13

Hi, Virsh destroy is always failing with below error. [host:~]$ virsh destroy XYZ--2 error: Failed to destroy domain XYZ--2 error: Requested operation is not valid: domain is not running [host:~]$ virsh list --all Id Name State ---------------------------------------------------- - XYZ--2 shut off [host:~]$ host:~]$ libvirtd --version libvirtd (libvirt) 1.0.1 [host:~]$ host:~]$ virsh version Compiled against library: libvirt 1.0.1 Using library: libvirt 1.0.1 Using API: QEMU 1.0.1 Running hypervisor: QEMU 0.13.0 [host:~]$ same VM was working with older libvirt vrsion: [host:~]$ virsh version Compiled against library: libvir 0.8.7 Using library: libvir 0.8.7 Using API: QEMU 0.8.7 Running hypervisor: QEMU 0.13.0 [host:~]$ when we upgrade to latest libvirt version:1.0.1, VM destroy is failing. Appreciate your help on this. Thanks, Chandrashekhar

3 3

[libvirt-users] fsck and guest images
by Jamie Fargen 03 Jul '13

03 Jul '13

Hey! I have some RHEL6 hypervisors and the VMs are in raw qemu image files in a local raid array linux raid + lvm + ext3. When a kernel update is installed a reboot is necessary, usually it has been more than 180 days since the last reboot and the file system is fsck'd and this takes 2-3 hours. I am curious to know if there is any documentation that addresses the pro's and con's of fsck'ing the volume containing /var/lib/libvirt/images. Could fsck make a change to the underlying file system that the guest images are stored on, which the guest operating system may not be able to handle when it runs its own file system maintenance, i.e. fsck or chkdsk. Is file system maintenance on the hypervisor volume storing the VM images redundant to the VM's own file system consistancy utilities. Regards, Jamie Ian Fargen

3 2

Re: [libvirt-users] backup procedure using blockcopy
by Thomas Stein 03 Jul '13

03 Jul '13

> virsh dumpxml --security-info dom > dom.xml > virsh undefine dom Hello. Someone was talking about this (undefining the VM) would not be neccessary anymore when qemu-1.5 has been released. Is that true? > virsh blockcopy dom vda /path/to/backup-vda > polling loop - check periodically until 'virsh blockjob dom vda' > shows 100% completion > virsh suspend dom > virsh save dom /path/to/memory-backup --running This does not work for me. hn ~ # virsh blockjob gentoo-template vda Block Copy: [100 %] hn ~ # virsh save gentoo-template /opt/virt-backup-blockcopy/gentoo-template/gentoo-template-memory-backup --running error: Failed to save domain gentoo-template to /opt/virt-backup-blockcopy/gentoo-template/gentoo-template-memory-backup error: Requested operation is not valid: domain has an active block job Obviously i can not save while the blockjob is running. cheers t.

2 4