October 2012 - Users - libvirt List Archives

[libvirt-users] some problem with snapshot by libvirt
by xingxing gao 21 Nov '14

21 Nov '14

Hi,all,i am using libvirt to manage my vm,in these days i am testing the libvirt snapshot ,but meet some problem: the snapshot was created from this command: snapshot-create-as win7 --disk-only --diskspec vda,snapshot=external --diskspec hda,snapshot=no but when i tried to revert from the snapshot which created from the above command ,i got error below: virsh # snapshot-revert win7 1338041515 --force error: unsupported configuration: revert to external disk snapshot not supported yet version: virsh # version Compiled against library: libvir 0.9.4 Using library: libvir 0.9.4 Using API: QEMU 0.9.4 Running hypervisor: QEMU 1.0.93

4 8

[libvirt-users] About IBM PowerVM hypervisor support
by Dennis Chen 22 Nov '12

22 Nov '12

Hi, I noticed that libvirt support the following hypervisors currently: * The KVM/QEMU <http://libvirt.org/drvqemu.html> Linux hypervisor * The Xen <http://libvirt.org/drvxen.html> hypervisor on Linux and Solaris hosts. * The LXC <http://libvirt.org/drvlxc.html> Linux container system * The OpenVZ <http://libvirt.org/drvopenvz.html> Linux container system * The User Mode Linux <http://libvirt.org/drvuml.html> paravirtualized kernel * The VirtualBox <http://libvirt.org/drvvbox.html> hypervisor * The VMware ESX and GSX <http://libvirt.org/drvesx.html> hypervisors * The VMware Workstation and Player <http://libvirt.org/drvvmware.html> hypervisors * The Microsoft Hyper-V <http://libvirt.org/drvhyperv.html> hypervisor /"the goal of libvirt: *to provide a common and stable layer sufficient to securely manage domains on a node, possibly remote*."/ My question is, does redhat's libvirt team have the plan to support IBM PowerVM hypervisor? If the answer is NO, what's the reason to make the support for IBM PowerVM hypervisor doesn't make sense... BRs, Dennis

5 17

[libvirt-users] can not create "qcow2" format volume by Java library.
by zhijun liu 06 Nov '12

06 Nov '12

hi，all, when I use Java library to create volume ,specified format "qcow2"，but when I check it use qemu-img info ,it show format is "raw".。 I think it a bug,can you fix it .. thanks very much. the java library version：0.4.8 libvirt version：0.9.8

3 2

[libvirt-users] hotplug
by Douglas Russell 03 Nov '12

03 Nov '12

Another separate thread for a slightly separate issue. For some reason, hotplugging disks does not work for me. I built my guest with ubuntu's vmbuilder. It's Precise, virtual. I have acpiphp in my /etc/modules file: $ lsmod Module Size Used by psmouse 97443 0 serio_raw 13211 0 virtio_balloon 13108 0 acpiphp 24231 0 floppy 70365 0 hotplug_pci seems to be compiled into the kernel: $ grep HOTPLUG_PCI /boot/config-3.2.0-32-virtual CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_HOTPLUG_PCI_CPCI=y CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m CONFIG_HOTPLUG_PCI_SHPC=m But when I attach a disk, absolutely nothing happens in the guest. No messages in the logs, no change to /proc/partitions, no new device nodes. When I reboot, the disk appears. Any ideas? Thanks, Douglas

2 2

[libvirt-users] libvirt python api error
by 宣铭艺 01 Nov '12

01 Nov '12

I use the code below: import libvirt auth = [[libvirt.VIR_CRED_AUTHNAME,libvirt.VIR_CRED_NOECHOPROMPT],'root',None] conn = libvirt.openAuth("qemu:///system",auth,0) with open("/root/cflinux.xml") as f: xml=f.read() domain = conn.defineXML(xml) domain.createWithFlags(0) and report the error: libvir: Security Labeling error : internal error cannot load AppArmor profile 'libvirt-f0655289-318d-4aa7-b87a-6ce7cdead4ee' Traceback (most recent call last): File "a.py", line 7, in <module> domain.createWithFlags(0) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 581, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirt.libvirtError: internal error cannot load AppArmor profile 'libvirt-f0655289-318d-4aa7-b87a-6ce7cdead4ee' who can help me fix the error?What may cause the error? Thanks. -- 樱宝宝: http://www.xuanmingyi.com

3 2

[libvirt-users] SCSI/IDE Devices in Guest
by Douglas Russell 01 Nov '12

01 Nov '12

I'm experimenting with how to attach storage to a guest virtual machine (I sent another message to th elist about that as it's slightly different) Looking in the XML files for my virtual machine, I see this: <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/vm/myvm/tmpeuiVc9.qcow2'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> However, /dev/hda is not a device in the guest. It is /dev/sda. It's not really a problem in it's own right, but it's one of several connected things which don't make sense. Is there some explanation for this? I believe this is linked to some weirdness when I attach some extra storage like so: virsh attach-disk myvm /dev/lvm-group1/mystorage sdb --driver qemu --persistent This adds the following stanza: <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/lvm-group1/mystorage'/> <target dev='sdb' bus='scsi'/> <address type='drive' controller='0' bus='0' unit='1'/> </disk> Looks about right. In the guest though, it pushes /dev/sda (root and swap are here on sda1 and sda2) upto /dev/sdb (sdb1 and sdb2). Somehow it still boots correctly despite fstab referrencing /dev/sda1 and /dev/sda2 for / and swap. The new /dev/sda is this storage I tried to add as sdb. What could be causing this? Thanks, Douglas

2 2

[libvirt-users] Multicast with KVM NAT networking
by james pedia 31 Oct '12

31 Oct '12

I used omping to test multicast between 2 KVM VMs under same physical host, and it is not working in terms of multicast (normal pings/ssh works between these 2 VMs). How to enable multicast for KVM guests running under NAT networking mode under the same physical host? Per some doc from RedHat, it would be very slow using NAT with multicast for KVM. I have to use virbr0/NAT mode since I am using wireless. So although it would be slow, it should still work, but this is not the case for me.

1 0

[libvirt-users] Attaching storage to a virtual machine
by Douglas Russell 31 Oct '12

31 Oct '12

I am slightly lost trying to attach some storage to a functioning virtual machine. If this where a real machine, I would simply be trying to mount a LVM volume. I have found a lot of documentation about adding storage pools, but I'm unsure if that is actually what I should be doing. Is that just for storage of the virtual machines themselves? Once I'd added my LVM volume group to virsh I could see no way of then assigning one volume of that to be offered as a logical volume to one particular virtual machine. I've also seen this: http://docs.fedoraproject.org/en-US/Fedora/13/html/Virtualization_Guide/sec… Looks like I could use that to assign one of the LVM volumes in my LVM volume group to the VM. If anyone could explain the different function of these two techniques and which sounds applicable I would be most grateful. Thanks, Douglas

2 3

[libvirt-users] error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
by 何鑫 31 Oct '12

31 Oct '12

Hi all, When I try to start libvirtd, using "libvirtd -d", error notification shown below:error : virPidFileAcquirePath:345 : Failed to acquire pid file '/$HOME/.libvirt/libvirtd.pid': Resource temporarily unavailable Using "libvirtd -v", show: "libvirtd: error: Unable to obtain pidfile. Check /var/log/messages or run without --daemon for more info." The file "libvirtd.pid" only contains "2010" without any other infomation. I have checked that libvirtd has been installed in "/libvirt/sbin" with binary format by self-compiled. So how can I solve the problem? Or how to start libvirtd? Meanwhile, virsh can't search "libvirt-sock", because the libvirtd is not started successfully. Thanks a lot! Corey

4 4

[libvirt-users] overriding shutdown for LXC
by erkan yanar 31 Oct '12

31 Oct '12

Moin Im using lxc@libvirt for LXC-applicationcontainer. Works quite nice for now, beside shutting down the container, which is not implemented. Hooks don't help here, as far as I found out. Is there a way to override/define the shutdown function? Regards Erkan -- über den grenzen muß die freiheit wohl wolkenlos sein

1 0

[libvirt-users] overriding shutdown for LXC
by erkan yanar 31 Oct '12

31 Oct '12

Moin Im using lxc@libvirt for LXC-applicationcontainer. Works quite nice for now, beside shutting down the container, which is not implemented. Hooks don't help here, as far as I found out. Is there a way to override/define the shutdown function? Regards Erkan -- über den grenzen muß die freiheit wohl wolkenlos sein

1 0

Re: [libvirt-users] libvirt-users Digest, Vol 34, Issue 35
by Chandana De Silva 30 Oct '12

30 Oct '12

You _can_ do NAT. Set up a different libvirt network on each machine, like this; 10.128.80.65 will have a libvirt network 192.168.65.0/24 10.128.80.66 will have a libvirt network 192.168.66.0/24 Set up each of these networks as routed networks. Now set up routing/iptables rules on each host to send traffic to each other, and NAT into the internal routed network On 31/10/12 01:46, libvirt-users-request(a)redhat.com wrote: > Message: 1 > Date: Tue, 30 Oct 2012 07:10:55 +0000 > From: ??<zhang_zhang(a)live.com> > To:<libvirt-users(a)redhat.com> > Subject: [libvirt-users] Can VMs on different machines communicate > with each other without IP? > Message-ID:<BLU172-W4666B32A6C9C8E75734C67FC620(a)phx.gbl> > Content-Type: text/plain; charset="gb2312" > > > Dear all, > I confront a somehow strange situation: > I have two machines configured with ip 10.128.80.65 and 10.128.80.66 respectively. Each has several VMs running on it. The problem is that I have no more ip ( such as 10.128.80.67...) to allocate to VMs, but VMs need to communicate with each other even when they are on different machines. > Two network options exist: NAT and bridge. > 1) NAT > But VMs on different machine cannot communicate with each other. > 2)bridge > But there is no more ip for vm to be bridged to host machine. > Is there any other way to work around this problem? > > > many thanks!

1 0

[libvirt-users] error: Cannot open network interface control socket
by 何鑫 30 Oct '12

30 Oct '12

Hi all， I try to use gdb to debug libvirt's source code, but when I tend to create a domain with xml, it shows "error: internal error Network 'default' is not active", so I use the net-related commands as below."virsh # net-start defaulterror: Failed to start network defaulterror: Cannot open network interface control socket: Operation not permitted" Then I check my URI, which is "qemu:///session", because adding "sudo virsh". I try to change URI to "qemu:///system" by clicking "virsh # connect qemu:///system". The following logs shown below:virsh # connect qemu:///systemerror: Failed to connect to the hypervisorerror: Failed to connect socket to '/usr/local/libvirt/var/run/libvirt/libvirt-sock': No such file or directory Could you please tell me the reason? Thanks a lot! Corey

2 1

[libvirt-users] Failed to connect socket to '/usr/local/libvirt/var/run/libvirt/libvirt-sock':
by 何鑫 30 Oct '12

30 Oct '12

Hi all, When I tend to use "virsh # connect qemu:///system", the debug info shown below:Failed to connect socket to '/usr/local/libvirt/var/run/libvirt/libvirt-sock': No such file or directory I use libvirt-bin's file "libvirt-sock" linking to the directory(usr/local/libvirt/var/run/libvirt) where virsh needs to search it, then the problem solved. But I need to debug libvirt with gdb tracing libvirt's source code, to avoid the effects of libvirt-bin, I should remove libvirt-bin. As a result, the symbolic of libvirt-sock is missed. Also I can't copy "libvirt-sock", because "cp: cannot open `/var/run/libvirt/libvirt-sock' for reading: No such device or address". So could you please give me some advise to add the file "libvirt-sock" after the source installation in ubuntu? Thanks a lot! Corey

2 1

Re: [libvirt-users] virtual machine seems to run, but can't connect to it
by Douglas Russell 30 Oct '12

30 Oct '12

Thanks, I just figured it out. It turns out that my institution issues 192. addresses to MAC addresses it doesn't recognize. I had not realized this so assumed that the IP address was coming from the VM setup somehow. Onto the next problem now! But I'll post separately about that. Thanks for the help On 30 October 2012 04:11, Rudy Godoy <rudy(a)stone-head.org> wrote: > On Mon, Oct 29, 2012 at 10:53:29AM +0000, Douglas Russell wrote: > > I'm using ubuntu 12.04LTS > > > > I setup a bridged network: > > > > <snip> > > > > > It generates fine and starts up seemingly without a problem as well when > I > > run > > > > virsh start myvm > > > > I am then able to resolve it's IP with MDNS and try > > > > ping myvm.local > > > > So presumably the VM is running? But for some reason I can't communicate > > with it, I can't SSH in, I don't even get a response to my ping. > > > > What does displays: > # virsh dominfo myvm > > Can you connect to the console? > > # virsh console myvm > > regards > > > -- > Rudy Godoy > http://stone-head.org >

1 0

[libvirt-users] libvirt and cgroups/blkio
by erkan yanar 29 Oct '12

29 Oct '12

Hi, is there a way to configure blkio via libvirt (xml)? Regards Erkan -- über den grenzen muß die freiheit wohl wolkenlos sein

2 4

[libvirt-users] Re-sizing qcow2 images
by Chandana De Silva 29 Oct '12

29 Oct '12

Hello All, I am using Centos 6.3 with libvirt 0.910 and qemu-kvm 0.12 I had to resize a qcow2 disk, and came across several issues; I used this command to resize the image: sudo -i /usr/bin/qemu-img /var/lib/libvirt/images/mydisk.img resize +100G . The disk is attached using virtio. I then tried to use parted from within the guest to resize the partition. The first problem was that the guest os did not see the increase disk size. Is there something that I need to do, to force the guest to see the higher disk size ? I got round this by re-starting the guest, but it would be better if there is some way to force the guest to see the new size. The second problem was that parted gave an error : Error: Filesystem has an incompatible feature enable. Some reading showed that this was caused by the "resize_inode" feature on the file system. I removed this feature using debugfs, and rans fsck, but parted still gave the same error: Error: Filesystem has an incompatible feature enable. I would like some advice on how this is supposed to be done. Thanks in advance. Chandana

3 3

[libvirt-users] Re-sizing qcow2 images
by Chandana De Silva 29 Oct '12

29 Oct '12

Hello Hristo, Thanks for your comments. I was really looking for an on-line resizing tool. Eric Blake's later response seem to cover this. Regards Chandana On 30/10/12 03:00, Hristo Deshev<hristo(a)deshev.com> > For my resizes I use libguestfs's virt-resize [1] tool. It's been > working flawlessly so far -- it resizes both the image file/device and > partitions inside that image. I can't recommend it enough. > > Best, > Hristo

1 0

[libvirt-users] virt-manager fails to connect to dbus
by sean darcy 29 Oct '12

29 Oct '12

On Fedora 17 updated: virt-manager-0.9.4-2.fc17.noarch libvirt-0.10.2.1-1.fc17.x86_64 after a reboot, virt-manager no longer starts. Used to! virt-manager & [1] 1676 [root@sixcore ~]# (virt-manager:1676): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Failed to connect to socket /tmp/dbus-0v4E2bXlqf: Connection refused Traceback (most recent call last): File "/usr/share/virt-manager/virt-manager.py", line 386, in <module> main() File "/usr/share/virt-manager/virt-manager.py", line 321, in main config = virtManager.config.vmmConfig(appname, appversion, ui_dir) File "/usr/share/virt-manager/virtManager/config.py", line 98, in __init__ self.conf.add_dir(self.conf_dir, gconf.CLIENT_PRELOAD_NONE) GError: No D-BUS daemon running [root@sixcore ~]# systemctl status dbus.service dbus.service - D-Bus System Message Bus Loaded: loaded (/usr/lib/systemd/system/dbus.service; enabled) Active: active (running) since Mon, 29 Oct 2012 16:53:41 -0400; 2s ago Process: 1669 ExecStartPre=/bin/rm -f /var/run/messagebus.pid (code=exited, status=0/SUCCESS) Process: 1666 ExecStartPre=/bin/dbus-uuidgen --ensure (code=exited, status=0/SUCCESS) Main PID: 1672 (dbus-daemon) CGroup: name=systemd:/system/dbus.service └ 1672 /bin/dbus-daemon --system --address=systemd: --nofork --systemd-activation Any help appreciated, sean

1 0

[libvirt-users] libvirt and thin provisionned LVM
by Daniel Berteaud 29 Oct '12

29 Oct '12

Hi there. I'm trying to use thin provisionned LVM for som eguests, and I'm having a problem. Until now, I use LVM pool with success. Here's my pool definition: <pool type='logical'> <name>data</name> <uuid>7f18e030-9d2d-805e-c65f-d12d0681b0a9</uuid> <capacity unit='bytes'>0</capacity> <allocation unit='bytes'>0</allocation> <available unit='bytes'>0</available> <source> <name>data</name> <format type='lvm2'/> </source> <target> <path>/dev/data</path> <permissions> <mode>0700</mode> <owner>-1</owner> <group>-1</group> </permissions> </target> </pool> Everything is working, until I create a thin privisionned pool like this: lvcreate --thin data/pool -L 50G Now, as soon as this is created, I cannot refresh my pool from libvirt POV: LANG=C_ALL virsh pool-refresh data error: Failed to start pool sys error: erreur interne Child process (/sbin/vgchange -aln vg_gerard) status unexpected: exit status 5 If I remove this LV, everything is working again. I'm using libvirt 0.9.10, the default one in CentOS 6.3 (x86_64). Has anybody managed to get it working ? Is this something fixed in more recent release ? Regards, Daniel -- Daniel Berteaud FIREWALL-SERVICES SARL. Société de Services en Logiciels Libres Technopôle Montesquieu 33650 MARTILLAC Tel : 05 56 64 15 32 Fax : 05 56 64 15 32 Web : http://www.firewall-services.com

1 0

[libvirt-users] virtual machine seems to run, but can't connect to it
by Douglas Russell 29 Oct '12

29 Oct '12

I'm using ubuntu 12.04LTS I setup a bridged network: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 Seems to work. Then I created a virtual machine using Ubuntu's vmbuilder tool like so: vmbuilder kvm ubuntu \ --suite 'precise' \ --flavour 'virtual' \ --arch 'amd64' \ --dest 'myvm' \ --hostname 'myvm' \ --mem '2048' \ --rootsize '4096' \ --swapsize '1024' \ --mirror 'http://archive.ubuntu.com/ubuntu' \ --name 'MyName' \ --user 'myuser' \ --pass 'password' \ --bridge 'br0' \ --addpkg acpid \ --addpkg vim \ --addpkg openssh-server \ --addpkg avahi-daemon \ --libvirt 'qemu:///system' \ --ip '192.168.0.100' It generates fine and starts up seemingly without a problem as well when I run virsh start myvm I am then able to resolve it's IP with MDNS and try ping myvm.local So presumably the VM is running? But for some reason I can't communicate with it, I can't SSH in, I don't even get a response to my ping. Any ideas? I'd be happy to provide further information. Thanks.

2 1

[libvirt-users] Health check
by Ali Nikzad 29 Oct '12

29 Oct '12

Hi, I want to write an application that Health checks a virtual machine to see whether the VM is up and running or not. I am using ESXi as my hypervisor. Are there any libvirt API functions that I can use for this purpose? Regards, Ali

1 0

Re: [libvirt-users] Re-sizing qcow2 images
by Rajesh Kumar Mallah 28 Oct '12

28 Oct '12

----- "Chandana De Silva" <chandana(a)desilva.id.au> wrote: | From: "Chandana De Silva" <chandana(a)desilva.id.au> | To: "Rajesh Kumar Mallah" <mallah(a)tradeindia.com> | Cc: libvirt-users(a)redhat.com | Sent: Sunday, October 28, 2012 3:35:05 PM | Subject: Re: [libvirt-users] Re-sizing qcow2 images | | Hello Rajesh, | | Thanks for the the suggestions. | | | On 28/10/12 17:43, Rajesh Kumar Mallah wrote: | > If you have a spare guest you may consider temporarily attaching the | said cow2 image to that guest | Do you mean detach from guest A and attach to guest B ? Yes. | > and use the partition tools (like parted , fdisk,cfdisk etc) | > and filesystem tools (like xfs_grow , resize2fs etc) to grow the | filesystem. | Assuming it will be possible to detach and attach, I still have the | problem of parted giving the incompatible feature error. These disk | have GPT partitions so I can use fdisk I am not sure about the "incompatible feature error" . May be you could try fdisk or cfdisk. It is usually a good idea to "free" the device before doing partition resizes. We had done it (resizing cow2) once and it was successful , we had to although convert from cow2 to raw , append a new dd'ed file and user fdisk over the raw image. eventually it worked. what is the size of your cow2 device if its not huge you may consider backing it up and restore to a larger device. hope it helps. mallah.

1 0

Re: [libvirt-users] Re-sizing qcow2 images
by Rajesh Kumar Mallah 28 Oct '12

28 Oct '12

Hi, If you have a spare guest you may consider temporarily attaching the said cow2 image to that guest and use the partition tools (like parted , fdisk,cfdisk etc) and filesystem tools (like xfs_grow , resize2fs etc) to grow the filesystem. use partprobe to reread the partition table into the kernel once partition editing tools are used. re-read of mounted root partions mostly do not work for me. hence i suggested using a separte vm for the image. Regards, Rajesh Kumar Mallah Tel. 91-11-46710500 (Ext:303) Cell +919811255597 Website: http://www.tradeindia.com/ \|/ \|/ \|/ stop printing \|/ \|/ \|/ | | | start planting | | | ----- "Chandana De Silva" <chandana(a)desilva.id.au> wrote: | From: "Chandana De Silva" <chandana(a)desilva.id.au> | To: libvirt-users(a)redhat.com | Sent: Sunday, October 28, 2012 8:13:50 AM | Subject: [libvirt-users] Re-sizing qcow2 images | | Hello All, | | I am using Centos 6.3 with libvirt 0.910 and qemu-kvm 0.12 | | I had to resize a qcow2 disk, and came across several issues; | | I used this command to resize the image: | | sudo -i /usr/bin/qemu-img /var/lib/libvirt/images/mydisk.img resize | +100G . The disk is attached using virtio. | | I then tried to use parted from within the guest to resize the | partition. | | The first problem was that the guest os did not see the increase disk | size. | Is there something that I need to do, to force the guest to see the | higher disk size ? | I got round this by re-starting the guest, but it would be better if | there is some way to force the guest to see the new size. | | The second problem was that parted gave an error : Error: Filesystem | has | an incompatible feature enable. | Some reading showed that this was caused by the "resize_inode" feature | | on the file system. I removed this feature using debugfs, and rans | fsck, | but parted still gave the same error: Error: Filesystem has an | incompatible feature enable. | | I would like some advice on how this is supposed to be done. | | Thanks in advance. | | Chandana | | | _______________________________________________ | libvirt-users mailing list | libvirt-users(a)redhat.com | https://www.redhat.com/mailman/listinfo/libvirt-users

2 1

[libvirt-users] hypervisor driver not found
by p.venkatasrinivas＠tcs.com 26 Oct '12

26 Oct '12

Hi, I installed Virtual box software in linux open suse. Unable to connect to the vbox hypervisor driver. Version-Release number of selected component (if applicable): libvirt-0.9.0 How reproducible: when i am giving the following command for virsh: virsh -connect vbox:///session then the following error is coming. error: no hypervisor driver available for vbox:///session error: failed to connect to the hypervisor Even I installed virtualbox the above error is coming. I am not able to find vbox hypervisor driver. Can anyone suggest where can i find vbox dirver. Awaiting Response Thanks and Regards, Srinivas. =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

2 5