February 2012 - Users - libvirt List Archives

[libvirt-users] virsh list not working with xen 4
by Rogério Vinhal Nunes 21 Sep '12

21 Sep '12

Hi, I'm having some trouble to get libvirt to show the correct power state of my virtual machines. I'm using Ubuntu 10.04 + Xen 4.1.1 + libvirt 0.8.8. virsh list --all only shows turned off machines registered in xend. If I turn them on, they just "disappear", and when I start machines directly from xml, they just doesn't appear at all. Libvirt is correctly connecting to xen as I can use the other commands fine, just the list option doesn't seem to work at all. What can I do to change that? # virsh version Compiled against library: libvir 0.8.8 Using library: libvir 0.8.8 Using API: Xen 3.0.1 Running hypervisor: Xen 4.1.0

2 1

[libvirt-users] converting save/dump output into physical memory image
by Andrew Tappert 05 Jun '12

05 Jun '12

A lot of people in the security community, myself included, are interested in memory forensics these days. Virtualization is a natural fit with memory forensics because it allows one to get access to a guest's memory without having to introduce any extra software into the guest or otherwise interfere with it. Incident responders are particularly interested in getting memory dumps from systems they're investigating. Virsh has "save" and "dump" commands for storing the state of a guest to a file on disk, but memory of KVM guests doesn't get saved in the "standard" input format for memory forensics tools, which is a raw physical memory image. (This is what you'd get via the classical "dd /dev/mem" approach or the contemporary equivalent using the crash driver; and VMware Server and Workstation produce .vmem files, which are such raw physical memory images, when a guest is paused or snapshotted.) In order to analyze the memory of Libvirt/KVM guests with my Linux memory forensics software, Second Look, I've created a tool for converting Libvirt-QEMU-save files (output of virsh save command) or QEMU-savevm files (output of virsh dump command) to raw physical memory images. I've got a basic working capability, though I'm still tracking down some problems with a guest allocated 8GB RAM--not all the memory seems to be present in the save or dump file. And I haven't tested very extensively yet, version support is limited to what I myself am currently running, etc. I'd like to know if this is a capability that others are interested in. Is this something that would be of interest to the Libvirt project if I were to contribute the code, or to the KVM project, or do you think it best exists as a separate project? I've also got a proof-of-concept tool for converting hibernate images to raw physical memory images. Perhaps a collection of tools for converting various memory dump formats would be a good project. Anyone else interested in this kind of stuff? As an author of commercial memory forensics software I've got a vested interest in availability of good memory acquisition capabilities. But there are a number of people working on FOSS Linux memory analysis tools, too... Andrew

4 5

[libvirt-users] Thread-safety issues with vbox driver ?
by Jean-Baptiste Rouault 20 Apr '12

20 Apr '12

Hi, I'm experiencing weird things with the vbox driver when using multiple threads. Following is the snippet of code I experience problems with /*****************************************************/ #include <stdlib.h> #include <stdio.h> #include <pthread.h> #include <libvirt/libvirt.h> void *create_and_destroy(void *arg) { virDomainPtr dom = (virDomainPtr)arg; char buf[VIR_UUID_STRING_BUFLEN]; virDomainGetUUIDString(dom, buf); if (virDomainCreate(dom) != 0) { printf("failed to start %s\n", buf); goto end; } printf("%s started\n", buf); if (virDomainDestroy(dom) != 0) { printf("failed to destroy %s\n", buf); } printf("%s destroyed\n", buf); end: virDomainFree(dom); pthread_exit(NULL); } int main(int argc, char **argv) { virConnectPtr conn = virConnectOpen("vbox:///session"); int i; int count = virConnectNumOfDefinedDomains(conn); char **names = malloc(count * sizeof(char *)); virConnectListDefinedDomains(conn, names, count); virDomainPtr *doms = malloc(count * sizeof(virDomainPtr)); for (i = 0 ; i < count ; ++i) { doms[i] = virDomainLookupByName(conn, names[i]); } pthread_t *threads = malloc(count * sizeof(pthread_t)); pthread_attr_t attr; pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); for (i = 0 ; i < count ; ++i) { pthread_create(&threads[i], &attr, create_and_destroy, (void *)doms[i]); } pthread_attr_destroy(&attr); for (i = 0 ; i < count ; ++i) { pthread_join(threads[i], NULL); } virConnectClose(conn); pthread_exit(NULL); } /************************************************/ Here is the output of the program with 2 defined domains: > libvir: VBOX error : operation failed: OpenRemoteSession/LaunchVMProcess failed, domain can't be started > failed to start c538c89a-70da-42ab-a88a-5aeb15698c12 > 034cf837-abe7-4c48-8373-0ddcf480d416 started > 034cf837-abe7-4c48-8373-0ddcf480d416 destroyed Sometimes the first domain really fails to start, but sometimes it starts correctly but libvirt reports an error. Sometimes domains aren't destroyed but libvirt reports no error at all. If there is only one domain, no problem occurs at all. I also tried the same code (ie with multiple domains) but with only one thread and it works well. I managed to reproduce these issues with libvirt 0.9.4, 0.9.7, using VirtualBox 4.0 and 4.1. -- Jean-Baptiste ROUAULT Ingénieur R&D - diateam : Architectes de l'information Phone : +33 (0)9 53 16 02 70 Fax : +33 (0)2 98 050 051

3 6

[libvirt-users] qemu - could not load kernel and dynamic ownership setting
by Shantanu Pavgi 06 Mar '12

06 Mar '12

Hi, I am getting following 'qemu: could not load kernel' error while trying to create a new VM using virt-install or virt-manager. The software versions are as follows: CentOS 6.2, Libvirt 0.9.4, qemu-kvm 2:0.12.1.2-2.209.el6_2.1. The qemu.conf has disabled dynamic_ownership setting. The VM instantiation has worked fine before when dynamic_ownership was enabled (default). So is this error related to dynamic ownership being disabled? I appreciate any help on how to debug this error further. Also, is there any documentation on why/when dynamic_ownership setting should be used? We have enabled it to figure this out through some test installs but right now unable to move further with the install step itself. {{{ virt-install --connect qemu:///system \ -n $guestname \ -r 512 \ --vcpus=1 \ --os-type=linux \ --os-variant=rhel6 \ --accelerate \ --graphics vnc,keymap=en-us \ -v \ -w bridge:br1 \ --disk path=$datastore/$guestname.img,size=40 \ -l $repo \ -x "ks=$ksurl/$ksfile ksdevice=eth0 ip=$guestip netmask=$netmask nameserver=$nameserver gateway=$gw" }}} {{{ Starting install... Retrieving file .treeinfo... | 798 B 00:00 ... Retrieving file vmlinuz... | 7.5 MB 00:00 ... Retrieving file initrd.img... | 59 MB 00:01 ... Allocating 'virtinst-vmlinuz.l4mEAd' | 3.8 MB 00:00 Transferring virtinst-vmlinuz.l4mEAd | 3.8 MB 00:00 Allocating 'virtinst-initrd.img.IvGhFr' | 29 MB 00:00 Transferring virtinst-initrd.img.IvGhFr | 29 MB 00:05 Creating storage file generic-server.img | 40 GB 00:00 ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 qemu: could not load kernel '/var/lib/libvirt/boot/virtinst-vmlinuz.l4mEAd': Permission denied Domain installation does not appear to have been successful. }}} -- Thanks, Shantanu

2 3

[libvirt-users] libvirt-manager , details / console ...
by Marko Weber 02 Mar '12

02 Mar '12

Hi all, we have an easy question for you maybe. when we start the virt-manager, and doubleclick an listed virtual machine, we always bei transported to CONSOLE page. Thats very annoying for us. Is there a possibility to set an option, that on doubleclick you are getting the CONSOLE TAB. in 95% we need Console and not Details. thanks for any costructive hints. marko , from cloudy rainy germany

3 3

[libvirt-users] Problems running virtual machines after an upgrade
by Bhasker C V 29 Feb '12

29 Feb '12

Hi all, I upgraded qemu-kvm and libvirt to the new versions qemu-kvm at : 1.0 libvirt at : git version 0.9.10 I lost the original machines but the xml files were are all present (it is not showing up in virsh list --all) But when I import an xml I get an error: Attached is some information which might be helpful Can someone help please ? If this is a compatibility issue please can someone tell me which is the latest version of qemu-kvm and libvirt combination which will work ? I cannot use qemu plain since it does not yet support boot from scsi thanks ----------------------------------------------- $ sudo virsh list --all Id Name State ---------------------------------------------------- $ lsmod | grep kvm kvm_intel 112920 0 kvm 280656 1 kvm_intel $ /usr/local/sbin/libvirtd --version /usr/local/sbin/libvirtd (libvirt) 0.9.10 $ ./qemu-system-x86_64 --version QEMU emulator version 1.0-bcv (qemu-kvm-1.0), Copyright (c) 2003-2008 Fabrice Bellard $ sudo virsh define ./debian.xml error: Failed to define domain from ./debian.xml error: unknown OS type hvm $ cat debian.xml <domain type='kvm'> <name>debian</name> <uuid>0aab8869-ff87-14ce-a00b-944cdca7acf7</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu cpuset='6-7'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='6'/> <vcpupin vcpu='1' cpuset='7'/> </cputune> <os> <type arch='x86_64' machine='pc-0.14'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu match='exact'> <model>core2duo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='1'/> <feature policy='disable' name='lahf_lm'/> </cpu> <clock offset='localtime'> <timer name='hpet' tickpolicy='catchup'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/VIRT/disks/DEBIAN'/> <target dev='sda' bus='scsi'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='scsi' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:71:62:f3'/> <source bridge='virt'/> <model type='e1000'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-gb'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> -- Bhasker C V

3 3

[libvirt-users] Virtualizing a an old SuSE system
by Dale Amon 29 Feb '12

29 Feb '12

I'm in the midst of an attempt to convert an old and rather large SuSE server (5 disks) into a virsh loadable VM. Has anyone else dealt with the issues of systems of this sort? I'm at the moment trying to hand construct a machine xml file for it. I managed to create one which would load but not start. I'd appreciate some pointers and can supply whatever info you'd like about what I am trying to do and what the dd'd image of the system disk and other disks are like. Not that they do have LVM's, although the boot should be off a base partition that is not in the LVM.

3 6

[libvirt-users] Fwd: Unable to connect qemu:///system on Fedora16 X86_64
by suyi wang 29 Feb '12

29 Feb '12

---------- 已转发邮件 ---------- 发件人： suyi wang <wangsuyi640(a)gmail.com> 日期： 2012年2月29日上午10:57 主题： Re: [libvirt-users] Unable to connect qemu:///system on Fedora16 X86_64 收件人： Eric Blake <eblake(a)redhat.com> So, thanks a lot . Eric. I attached the figure，which showed when I ran the command "virt-manager". I also tested the commad as follows, sa you can see my output. [root@localhost ~]# virt-manager --debug 2012-02-29 10:56:13,555 (cli:71): virt-manager startup 2012-02-29 10:56:13,555 (virt-manager:292): Launched as: /usr/share/virt-manager/virt-manager.py --debug 2012-02-29 10:56:13,555 (virt-manager:293): GTK version: (2, 24, 7) 2012-02-29 10:56:13,555 (virt-manager:294): virtManager import: <module 'virtManager' from '/usr/share/virt-manager/virtManager/__init__.pyc'> 2012-02-29 10:56:13,671 (engine:555): No inspection thread because libguestfs is too old, not available, or libvirt is not thread safe. 2012-02-29 10:56:13,674 (engine:346): About to connect to uris ['qemu:///system'] 2012-02-29 10:56:13,720 (engine:471): window counter incremented to 1 2012-02-29 10:56:13,726 (connection:954): Scheduling background open thread for qemu:///system 2012-02-29 10:56:13,727 (connection:1140): Background 'open connection' thread is running Thanks! Suyi Wang 2012/2/29 Eric Blake <eblake(a)redhat.com> > On 02/28/2012 10:23 AM, suyi wang wrote: > > Dear all: > > I ust installed Fedora16Fedora16 X86_64 on my new machine, and then I > > ran the commands as follows(ran as root): > > > > yum install qemu-kvm > > yum install qemu > > yum install libvirt > > yum install virt-manager > > > > then I started the libvirtd as follow: > > /etc/init.d/lbvirtd start > > > > So , it ran well. > > > > > > However, after a few days , when I ran the command "virt-manager" , it > > showed as bellow: > > > > > > > > it seemed that ti cannot connect the hipervisor. > > This list is plain-text only. Your embedded graphic (at least, I'm > assuming you attempted to embed a graphic) got eaten by the list server, > so we don't know what message you got. Can you paste the actual error > message you got? > > Meanwhile, we have a wiki page for diagnosing common problems. Perhaps > your issue is covered by one of the items there; and if not, it would > help if you could add a new page with the steps you take in resolving > the issue. http://wiki.libvirt.org/page/Troubleshooting > > > > > > > Then I did a little test: > > I ran the conmand "virsh list" , but it didnot work,either. > > Again, knowing the exact output of 'virsh -c qemu:///system list', > rather than just saying it didn't work, will help others in diagnosing > your issue. > > -- > Eric Blake eblake(a)redhat.com +1-919-301-3266 > Libvirt virtualization library http://libvirt.org > >

1 0

[libvirt-users] Unable to connect qemu:///system on Fedora16 X86_64
by suyi wang 29 Feb '12

29 Feb '12

Dear all: I ust installed Fedora16Fedora16 X86_64 on my new machine, and then I ran the commands as follows(ran as root): yum install qemu-kvm yum install qemu yum install libvirt yum install virt-manager then I started the libvirtd as follow: /etc/init.d/lbvirtd start So , it ran well. However, after a few days , when I ran the command "virt-manager" , it showed as bellow: it seemed that ti cannot connect the hipervisor. Then I did a little test: I ran the conmand "virsh list" , but it didnot work,either. Then I used Python as follows: import libvirt cc = libvirt.open(r'qemu:///system') but it didnot work,either. All the test above are under root . I hope that someone can give me some suggestiion. Thanks to all! Suyi Wang

2 1

[libvirt-users] Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
by Guido Winkelmann 28 Feb '12

28 Feb '12

Hi, As the subject line indicates, when I'm calling virDomainCreate() to start a defined domain, and that command fails because the domain is already running at that point, virGetLastError() will return NULL, instead of a proper pointer to an error code. Libvirt will, however, print an error to the console: libvir: QEMU error : Requested operation is not valid: domain is already running This looks like a bug to me, and I'm fairly certain that earlier version would return an error code of VIR_ERR_OPERATION_INVALID at that point. Or maybe that was just virDomainDestroy(), and I'm just blindly assuming that virDomainCreate() will work analogously... Anyway, no error code is bad, because I can't tell what happened. This is version 0.9.8. I couldn't find anything about this issue in the changelogs for 0.9.9 and 0.9.10, so I'm assuming the issue has not been addressed since. Guido

2 6

[libvirt-users] Sys::Virt
by Evaggelos Balaskas 28 Feb '12

28 Feb '12

Can anyone help me: $ perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Sys::Virt Writing MYMETA.yml and MYMETA.json $ make /usr/bin/perl "-Iblib/arch" "-Iblib/lib" perl-Sys-Virt.spec.PL perl-Sys-Virt.spec make: *** [perl-Sys-Virt.spec] Segmentation fault make: *** Deleting file `perl-Sys-Virt.spec' Evaggelos Balaskas - Unix System Engineer http://gr.linkedin.com/in/evaggelosbalaskas

2 5

[libvirt-users] Not able to mount iSCSI volume to Guest VM
by Sarath P R 25 Feb '12

25 Feb '12

Hi All, I have created a 10GB logical volume in iSCSCI target machine. I am abe to mount the volume in my Dom0 . But I am not able to attach the volume to Guest VM I tried "<pool type='iscsi'>"+ "<name>virtvolume</name>"+ "<source>"+ "<host name='192.168.1.1'/>"+ "<device path='"+src+"'/>"+ "</source>"+ "<target>"+ "<path>/dev/disk/by-path</path>"+ "</target>"+ "</pool>" I Could create a storage pool using the above xml. But how can I attach that volume to the guest VM. Please Help. Thanks in Advance -- Thank You Sarath P R

1 0

[libvirt-users] lockmanager for use with clvm
by Michael Menge 25 Feb '12

25 Feb '12

Hi, i am setting up a cluster of kvm hypervisors managed with libvirt. The storage pool is on iscsi with clvm. To prevent that a vm is started on more than one hypervisor, I want to use a lockmanager with libvirt. I could only find sanlock as lockmanager, but AFSIK sanlock will not work in my setup as I don't have a shared filesystem. I have dlm running for clvm. Are there lockmanager implementations that use dlm? Or other implementations that can be used in my setup? Regards Michael Menge -------------------------------------------------------------------------------- M.Menge Tel.: (49) 7071/29-70316 Universität Tübingen Fax.: (49) 7071/29-5912 Zentrum für Datenverarbeitung mail: michael.menge(a)zdv.uni-tuebingen.de Wächterstraße 76 72074 Tübingen

3 2

[libvirt-users] Regarding file vs block devices for the guest
by Udayan Bapat 25 Feb '12

25 Feb '12

Hi There is a general consensus in regards to use of a block device (exported partition) over a file device (.img or .qcow2) image. It is expected to see a big performance jump in case of a block device. However in my test I have seen it is not always the case. My testbed has Fedora-14.0 as the host and Ubuntu-10.0 as guest running on Intel x86 4 core/8 thread VTX enabled system. I ran file system benchmarks from the guest using iozone and measure throughput as well as CPU utilization. I observed that upto device sizes of 8 GB, file device (.img with ext3 partition) consistently outperformed block device (ext3 partition exported directly to the guest). Is similar anomaly seen by the community too? If not, i.e. block device should always outperform file, which layer should I be looking at to understand what could be happening. Just to make sure, I repeated same test a bunch of times to eliminate noise. As I increased the HDD size, then block device performance drastically improved and consistently performed better than fileIO. In both tests, my guest had 512 MB RAM with 1 vcpu. I ran all 11 iozone test to do performance comparisons. Any pointer/insight would be extremely helpful. Thank you in advance. -- Udayan

1 0

Re: [libvirt-users] [SeaBIOS] RFE: Print amount of RAM
by Igor Galić 23 Feb '12

23 Feb '12

Cross posting from seabios@ [snip] > > Now I'd like to ask you guys if you could print the amount > > of RAM available -- like most other BIOSes out there already > > do - it would be extremely helpful to aid troubleshooting. > > SeaBIOS boots too fast for anything useful to be seen on the screen. > That said, one can add "-chardev stdio,id=seabios -device > isa-debugcon,iobase=0x402,chardev=seabios" to the qemu command line > to > see the SeaBIOS debugging output. That output has the memory info > and much more. I guess that's then something to propose for libvirt as RFE as an extra argument for <bios useserial='yes' /> we could introduce <bios useserial='debug' /> perhaps. > -Kevin Thanks Kevin. So long, i -- Igor Galić Tel: +43 (0) 664 886 22 883 Mail: i.galic(a)brainsware.org URL: http://brainsware.org/ GPG: 6880 4155 74BD FD7C B515 2EA5 4B1D 9E08 A097 C9AE

1 0

[libvirt-users] libvirt doesn't boot kVM, hangs, qemu on 100% CPU
by Igor Galić 23 Feb '12

23 Feb '12

Hi folks, it's been adventurous. Yesterday night I've started debugging this particular issue of why my KVMs don't boot on Ubuntu 11.10. A first hint was apparmor, which seemed to deny access to the LVM partitions I had assigned as disks. After correctly configuring apparmor, or even disabling it the issue was still the same. After a wild goose chase, I decided to update everything, I now have * libvirt 0.9.8 (built from Ubuntu 12.04 sources) * qemu 1.0 (built from Ubuntu 12.04 sources) * SeaBIOS (built from git master: pre-1.6.4-20120221_203841) I even installed sgabios to see what's going on without having to connect with virt-manager every time. So what's going on? What am I trying to do? I'm trying to boot an Ubuntu amd64 VM, which looks pretty much the same as the Ubuntu host, except that I uninstalled libvirt and qemu-kvm, which felt out of place. This I'm trying to accomplish by booting it with the host's kernel and initrd (os/kernel and os/initrd). So much for the starting conditions. You can find my configuration here: http://sprunge.us/gCVj (I'm attaching it just in case the pastebin goes stale). The first thing that is slightly irritating is that it doesn't validate: """ Relax-NG validity error : Extra element kernel in interleave web.xml:9: element kernel: Relax-NG validity error : Element os failed to validate content web.xml:8: element type: Relax-NG validity error : Error validating value web.xml:8: element type: Relax-NG validity error : Element type failed to validate content web.xml:1: element domain: Relax-NG validity error : Invalid sequence in interleave web.xml:1: element domain: Relax-NG validity error : Element domain failed to validate content web.xml fails to validate """ Interestingly, even if I remove some of the elements that `virt-xml-validate` complains about via `virsh edit`, next time I `edit`, or `dumpxml` it'll be back in place. With sgabios in place, I can fortunately just c/p to show you what a boot looks like: """ SeaBIOS (version pre-1.6.4-20120221_203841-bacon) iPXE (http://ipxe.org) 00:03.0 C100 PCI2.10 PnP PMM+001C9B80+00189B80 C100 iPXE (http://ipxe.org) 00:04.0 C200 PCI2.10 PnP PMM 001C9B80 00189B80 C200 Booting from ROM... """ And that's it. And that's wrong. But I can't seem to figure out how and why. I'll be hugely in debt for your help and welcome any suggestions, ready to provide as much information as you need to solve this issue. So long, i -- Igor Galić Tel: +43 (0) 664 886 22 883 Mail: i.galic(a)brainsware.org URL: http://brainsware.org/ GPG: 6880 4155 74BD FD7C B515 2EA5 4B1D 9E08 A097 C9AE

4 5

[libvirt-users] [libvirt] a question about sanlock
by Alex Jia 22 Feb '12

22 Feb '12

Hi Daniel, I got a question about lock manager, if I enable 'sanlock' in qemu.conf and uncomment 'auto_disk_leases = 1' in qemu-sanlock.conf then restart libvirtd service, libvirtd will be dead, I know I should also uncomment 'host_id = 1' in qemu-sanlock.conf, because I enable 'auto_disk_leases'. The question is the libvirtd must die due to a error users configuration? or could we give some warning information instead of libvirtd die? Thanks & Regards, Alex

2 1

[libvirt-users] libvirt -user'question
by 冰淇淋 22 Feb '12

22 Feb '12

hi,: I am a new user of libvirt ,I asked a question about using libvirt to connect to esxi server. I got the answer is https://www.redhat.com/archives/libvir-list/2012-February/msg00860.html So,I try to make the change on the mailing list you just added. - * Add a dummy expect header to stop CURL from waiting for a response code + * Add an empty expect header to stop CURL from waiting for a response code - curl->headers = curl_slist_append(curl->headers, "Expect: nothing"); + curl->headers = curl_slist_append(curl->headers, "Expect:"); and I did the follow steps in my computer: 1../configure --with-esx 2.make 3.make install 4../autogen.sh --prefix=$HOME/usr 5.make 6.make install I complete installing the libvirt and run the command :virsh --version ,get the right answer 0.9.7 and I run the command :virsh -c esx://me@exampe.com/?tansport=http the error before I mentioned related to http did disappeared ,but and I still get a error like:error: internal error XPath evaluation of response for call to 'RetrieveServiceContent' failed I don't understand what does this error mean,or is my steps wrong ?so I hope you can help me to figure out the promble. thanks a lot and so sorry for trouble you too much .waiting for you reply on line. ps: I have another question about libvirt , I saw this :%if %{with_esx}%if 0%{?fedora} >= 9 || 0%{?rhel} >= 6 in /libvirt0.9.7/livirt.spec,I want to know if libvirt esx driver only can be useful on fedora>=9||rhel>=6,and the other OS like centos 6.0 or redhat ,will disable the use of esx driver of libvirt. thanks again. best regards! ------------------ 原始邮件 ------------------ 发件人: "Matthias Bolte"<matthias.bolte(a)googlemail.com>; 发送时间: 2012年2月21日(星期二) 凌晨5:44 收件人: "冰淇淋"<453193368(a)qq.com>; 抄送: "libvirt-users"<libvirt-users(a)redhat.com>; 主题: Re: [libvirt-users] the probelm in using libvirt to connect esx server 2012/2/20 冰淇淋 <453193368(a)qq.com>: > hi, > I am a new user of libvirt ,i really appreciate libvirt，and want to use it > in my work.I want to use it to conncet to a ESXi server.when I try to > connect to the server ,I use the command :virsh -c > esx://name@exmaple.com,And I get an > > 1.error :error: internal error curl_easy_perform() returned an error: > Couldn't connect to server (7) : couldn't connect to host > so I think maybe the firewall shutdown the 443 for https,so I used > command:virsh -c esx://name@example.com/?transport=http And I still get an > error like: > error: internal error HTTP response code 417 for call to > 'RetrieveServiceContent' > error: failed to connect to the hypervisor HTTP error code 417 is related to the Expect header. The error indicates that the server or a proxy in between doesn't handle the Expect header. I assume that the ESXi sever itself is not the problem, because it works for me here. Maybe there is a HTTP proxy between your computer and the ESXi server that returns this 417 error code. This problem is probably related to libvirt sending a dummy Expect header instead of sending no Expect at all. If you're building libvirt from source you can try this patch that I just send to the mailing list for review https://www.redhat.com/archives/libvir-list/2012-February/msg00860.html It fixes the Expect header problem and might fix your connection problem. -- Matthias Bolte http://photron.blogspot.com </:includetail>

3 2

[libvirt-users] the probelm in using libvirt to connect esx server
by 冰淇淋 21 Feb '12

21 Feb '12

hi, I am a new user of libvirt ,i really appreciate libvirt，and want to use it in my work.I want to use it to conncet to a ESXi server.when I try to connect to the server ,I use the command :virsh -c esx://name@exmaple.com,And I get an 1.error :error: internal error curl_easy_perform() returned an error: Couldn't connect to server (7) : couldn't connect to host so I think maybe the firewall shutdown the 443 for https,so I used command:virsh -c esx://name@example.com/?transport=http And I still get an error like: error: internal error HTTP response code 417 for call to 'RetrieveServiceContent' error: failed to connect to the hypervisor so ,I still can't find the way to connet the server,if you kown how to handle this problem ,i hope you can help me thanks a lot. i will wait for you letter day and night. Best regards

2 1

[libvirt-users] Error deleting a volume
by Bo Bo 18 Feb '12

18 Feb '12

Hello group. This is my first post here so first of all I'd like to greet everybody reading this group. Secondly, I have a problem with libvirt used from a perl script. I would like to undefine a domain and afterwards delete the volume that had been attached to the domain as a disk. The volume is a qcow2 file and is placed in a 'dir' type pool. I succeed in undefining the domain but trying to delete a volume using $vol->delete() crashes the libvirtd. The script catches an exception: libvirt error code: 38, message: server closed connection and the init process echoes an entry to the log: init: libvirt-bin main process (6999) killed by ABRT signal When I try to list volumes afterwards using virsh, I see that not only the volume, but also the pool are missing. Moreover the pool that holds a backing storage for the qcow2 file is also missing. It seems that the delete operation actualy succeeds because the file gets deleted from disk as well. Fortunately the backing storage file is still present on the disk although its pool in virsh disappears. Has anybody come across a similar problem before? Any help is highly appreciated. Best regards Bogdan Katynski

2 3

[libvirt-users] Detecting Co-residency of VMs on KVM
by Shikhar Agarwal 16 Feb '12

16 Feb '12

I am doing an experiment which involves detecting co-resident VMs (testing if 2 VMs are on the same physical machine) on KVM. I have tried using cache covert channel, but this test does not work if the VMs are on different processors within the same host as the caches are not shared then. If I use the tools netperf and iperf to differentiate using network channels, I am not getting clear results. This is because the network is really good (10 Gbps). I believe there are better and more reliable ways for the same. Please suggest some of these. The idea is to find some resource (like memory, disk, etc) that is shared by the VMs and try to run some benchmarks that thrash this resource. Another idea is to take advantage of some optimization that kvm might be doing internally. Please help me. Thank you Shikhar Agarwal Undergraduate Senior IIT-Delhi

3 3

[libvirt-users] Detach devices using Libvirt+Xen
by Daniel Espling 16 Feb '12

16 Feb '12

Hi! We're struggling to get device detaching to work reliably using Xen. We can reliably use the same code to manage devices using Libvirt+KVM without any problems. We've tested this on Xen with both CD-ROM and USB devices without success. See below for detailed descriptions. Thankful for any help! Regards, Daniel Espling --- For CD-ROM, we can mount them using attach-device but cannot remove them using the correspoding call to detach-device: cdrom7.xml contains: <disk type='file' device='cdrom'> <driver name='file' type='raw'/> <source file='/opt/diskimages/test7.iso'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> eject.xml contains: <disk type='block' device='cdrom'> <driver name='file'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> cdrom8.xml is identical to cdrom7.xml apart from the .iso file used. # virsh attach-device deb cdrom7.xml Device attached successfully # virsh detach-device deb cdrom7.xml error: no such device in deb # virsh attach-device deb eject.xml error: Failed to attach device from eject.xml error: POST operation failed: xend_post: error from xen daemon: (xend.err 'Device 5632 not connected') # virsh update-device deb cdrom8.xml --persistent error: Failed to update device from cdrom8.xml error: POST operation failed: xend_post: error from xen daemon: (xend.err 'Device 5632 not connected') dumpxml shows the cdrom device attached exactly as it's defined in the xml. Using virsh we're able to use "virsh detach-disk deb hdc" to unmount the CD-ROM, but we need to be able to do this using the python API. We cannot find a corresponding call to detach-disk and we therefore have to rely on detach-device instead, right? Are there any flags we can use for detachDeviceFlags() to replicate the functionality of detach-disk? ---- Similarly for USB devices, we can mount them OK but not remove them using the corresponding call to detach-device. Calling detach-disk works, but again we need to find the corresponding call for this function using the python API. One thing we've found with mounting USB devices is that they seem to be mounted on the SCSI bus instead of the USB one as specified: Example: usb7.xml contains: <disk type='file' device='disk'> <driver name='file' type='raw'/> <source file='/opt/diskimages/test7.iso'/> <target dev='sda' bus='usb'/> <readonly/> </disk> dumpxml shows: <disk type='file' device='disk'> <driver name='file'/> <source file='/opt/diskimages/test7.iso'/> <target dev='sda' bus='scsi'/> <readonly/> </disk> # virsh attach-device deb usb7.xml Device attached successfully Test attaching again (expected to fail): # virsh attach-device deb usb7.xml error: Failed to attach device from usb7.xml error: Requested operation is not valid: target 'sda' already exists `-testgrid7.leeds.ac.uk /opt/recontext # virsh detach-device deb usb7.xml error: no such device in deb ---- Relevant info: Compiled against library: libvir 0.9.9 Using library: libvir 0.9.9 Using API: Xen 0.9.9 Running hypervisor: Xen 4.0.0 Running CentOS 5.5 (final) Linux 2.6.32.24 #3 SMP Fri Oct 29 16:22:02 BST 2010 x86_64 x86_64 x86_64 GNU/Linux

2 3

[libvirt-users] qcow2 performance
by Stefan G. Weichinger 15 Feb '12

15 Feb '12

Greets, I have to research performance-issues of a W2003-VM within KVM. Right now it's a qcow2-image-file w/ default settings within libvirt (configured by vmm ...) My question: what caching to use? writeback/writethrough/etc ... what to use for data integrity while not getting ultraslow performance? Found https://www.linuxfoundation.jp/jp_uploads/JLS2009/jls09_hellwig.pdf Is there any other list/doc what to use and why? Thanks, Stefan

5 10

Re: [libvirt-users] [libvirt] Fail to import available VM image
by Laine Stump 15 Feb '12

15 Feb '12

On 02/14/2012 11:01 AM, Jun Koi wrote: > On Tue, Feb 14, 2012 at 11:47 PM, Alex Jia <ajia(a)redhat.com> wrote: >> Hi Jun, >> I assume you haven't changed libvirt default URI, it may be a issue, >> I want to know whether it works for you if you explicitly specify >> --connect qemu:///system with virt-install? I think a root reason >> probably is your disk image location, the log said it can't find >> storage volume, if you put img.winp under the /var/lib/libvirt/images, >> then give a disk absolute path to virt-install, Does it work for you? > ok, i change the command a bit, and it went further. > here is how i did: > > (1) compiled everything from source, then install (make install) to my Ubuntu > > (2) start libvirtd on commandline > # libvirtd -d > > (3) import my KVM image to libvirt > > $ virt-install --connect qemu:///system -n winxp -r 800 --accelerate > --vnc -v --noautoconsole --import -f /home/jun/img/img.winxp > > it failed, and the log is like below: > > .... > [Tue, 14 Feb 2012 23:51:49 virt-install 3831] DEBUG (cli:326) > Requesting libvirt URI qemu:///system > [Tue, 14 Feb 2012 23:51:51 virt-install 3831] DEBUG (cli:328) Received > libvirt URI qemu:///system > [Tue, 14 Feb 2012 23:51:52 virt-install 3831] DEBUG (virt-install:259) > Requesting virt method 'hvm', hv type 'default'. > [Tue, 14 Feb 2012 23:51:52 virt-install 3831] DEBUG (virt-install:469) > Received virt method 'hvm' > [Tue, 14 Feb 2012 23:51:52 virt-install 3831] DEBUG (virt-install:470) > Hypervisor name is 'kvm' > [Tue, 14 Feb 2012 23:51:52 virt-install 3831] ERROR (cli:439) Error in > network device parameters: Virtual network 'default' has not been > started. > [Tue, 14 Feb 2012 23:51:52 virt-install 3831] DEBUG (cli:440) > Traceback (most recent call last): > File "/usr/local/lib/python2.6/dist-packages/virtinst/cli.py", line > 884, in get_networks > dev = parse_network(guest, netstr, mac=mac) > File "/usr/local/lib/python2.6/dist-packages/virtinst/cli.py", line > 1642, in parse_network > bridge=opts.get("bridge")) > File "/usr/local/lib/python2.6/dist-packages/virtinst/VirtualNetworkInterface.py", > line 153, in __init__ > self.network = network > File "/usr/local/lib/python2.6/dist-packages/virtinst/XMLBuilderDomain.py", > line 309, in new_setter > fset(self, val, *args, **kwargs) > File "/usr/local/lib/python2.6/dist-packages/virtinst/VirtualNetworkInterface.py", > line 257, in set_network > "started.") % newnet) > ValueError: Virtual network 'default' has not been started. A very common cause of this problem is that a systemwide instance of dnsmasq is already (erroneously) listening on the bridge created by libvirt for the default network. I took your email as an oppurtunity to write an entry in the new Troubleshooting section of the libvirt wiki. It will explain to you how to solve your problem (*if* this is your problem, of course :-). http://wiki.libvirt.org/page/Virtual_network_%27default%27_has_not_been_sta… If that ends up not being your problem, please reply to this message, but sending the reply to libvirt-users(a)redhat.com (I also Cc'ed this message there) rather than to libvir-list(a)redhat.com. (The former is the official list for user questions about libvirt, whil libvir-list is intended for for people discussing the code.) > i guess perhaps just starting "libvirtd -d" on commandline is not > enough. do i need a script to configure and start libvirtd properly > for me? > and it seems i must configure the virtual network somehow? The "default" network should already be there as part of the stock install.

3 7

[libvirt-users] QEMU hook on restore
by Székelyi Szabolcs 14 Feb '12

14 Feb '12

Hi, I'm using libvirt 0.8.3. It looks like to me that when a QEMU domain is restored from save, the hook is called with the "stopped end -" arguments. I've also noticed that the domain description passed to the hook script doesn't contain the network device the host will be attached to (XPath: /domain/devices/interface/target/@dev). Are these a bugs or a features? Thanks, -- cc

3 10