- Devel - libvirt List Archives

[libvirt] [PATCH RFC 0/3] Keep original file label
by Michal Privoznik 01 Mar '13

01 Mar '13

Just sending out early to make sure this time I am going in acceptable direction before digging into selinux. Hopefully, apparmor won't be any deal as I don't see anything that should be restored on domain shut off process. Michal Privoznik (3): security_dac: Remember owner prior chown() and restore on relabel security_manager: Introduce {Save,Load}Status security_dac: Implement {save,load}Status src/lxc/lxc_controller.c | 2 +- src/lxc/lxc_driver.c | 1 + src/qemu/qemu_driver.c | 3 + src/security/security_dac.c | 465 ++++++++++++++++++++++++++++++++++----- src/security/security_driver.h | 12 + src/security/security_manager.c | 161 +++++++++++++- src/security/security_manager.h | 2 + tests/seclabeltest.c | 2 +- tests/securityselinuxlabeltest.c | 3 +- tests/securityselinuxtest.c | 3 +- 10 files changed, 590 insertions(+), 64 deletions(-) -- 1.8.1.4

3 12

[libvirt] [PATCH 0/4]typo fix and codes improvement in generator.py
by Guannan Ren 01 Mar '13

01 Mar '13

This four patches try to fix various typoes, fd leaks and optimize codes in generator.py script. This is the first round. Guannan Ren(4) [PATCH 1/4] python: global variable and debugging improvement for [PATCH 2/4] python: fix typoes and repeated global vars references [PATCH 3/4] python: optimize SAX xml parsing event handler [PATCH 4/4] python: fix fd leak in generator.py python/generator.py | 158 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------------------------------------------- 1 file changed, 70 insertions(+), 88 deletions(-)

2 9

[libvirt] [PATCH] qemu: Make sure qemuProcessStart is run within a job
by Jiri Denemark 01 Mar '13

01 Mar '13

qemuProcessStart expects to be run with a job already set and every caller except for qemuMigrationPrepareAny use it correctly. This bug can be observed in libvirtd logs during incoming migration as warning : qemuDomainObjEnterMonitorInternal:979 : This thread seems to be the async job owner; entering monitor without asking for a nested job is dangerous --- src/qemu/qemu_domain.c | 35 ++++++++++++++++++++++++----------- src/qemu/qemu_domain.h | 4 ++++ src/qemu/qemu_migration.c | 11 +++++++---- 3 files changed, 35 insertions(+), 15 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index eca85fc..0e56596 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -881,6 +881,29 @@ int qemuDomainObjBeginAsyncJob(virQEMUDriverPtr driver, asyncJob); } +int +qemuDomainObjBeginNestedJob(virQEMUDriverPtr driver, + virDomainObjPtr obj, + enum qemuDomainAsyncJob asyncJob) +{ + qemuDomainObjPrivatePtr priv = obj->privateData; + + if (asyncJob != priv->job.asyncJob) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("unexpected async job %d"), asyncJob); + return -1; + } + + if (priv->job.asyncOwner != virThreadSelfID()) { + VIR_WARN("This thread doesn't seem to be the async job owner: %d", + priv->job.asyncOwner); + } + + return qemuDomainObjBeginJobInternal(driver, obj, + QEMU_JOB_ASYNC_NESTED, + QEMU_ASYNC_JOB_NONE); +} + /* * obj must be locked before calling @@ -955,17 +978,7 @@ qemuDomainObjEnterMonitorInternal(virQEMUDriverPtr driver, qemuDomainObjPrivatePtr priv = obj->privateData; if (asyncJob != QEMU_ASYNC_JOB_NONE) { - if (asyncJob != priv->job.asyncJob) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("unexpected async job %d"), asyncJob); - return -1; - } - if (priv->job.asyncOwner != virThreadSelfID()) - VIR_WARN("This thread doesn't seem to be the async job owner: %d", - priv->job.asyncOwner); - if (qemuDomainObjBeginJobInternal(driver, obj, - QEMU_JOB_ASYNC_NESTED, - QEMU_ASYNC_JOB_NONE) < 0) + if (qemuDomainObjBeginNestedJob(driver, obj, asyncJob) < 0) return -1; if (!virDomainObjIsActive(obj)) { virReportError(VIR_ERR_OPERATION_FAILED, "%s", diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h index 30e6b97..e114f89 100644 --- a/src/qemu/qemu_domain.h +++ b/src/qemu/qemu_domain.h @@ -192,6 +192,10 @@ int qemuDomainObjBeginAsyncJob(virQEMUDriverPtr driver, virDomainObjPtr obj, enum qemuDomainAsyncJob asyncJob) ATTRIBUTE_RETURN_CHECK; +int qemuDomainObjBeginNestedJob(virQEMUDriverPtr driver, + virDomainObjPtr obj, + enum qemuDomainAsyncJob asyncJob) + ATTRIBUTE_RETURN_CHECK; bool qemuDomainObjEndJob(virQEMUDriverPtr driver, virDomainObjPtr obj) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index a58a79d..4c6d7e1 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -2118,6 +2118,10 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, goto endjob; } + if (qemuDomainObjBeginNestedJob(driver, vm, + QEMU_ASYNC_JOB_MIGRATION_IN) < 0) + goto endjob; + /* Start the QEMU daemon, with the same command-line arguments plus * -incoming $migrateFrom */ @@ -2126,9 +2130,8 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, VIR_QEMU_PROCESS_START_PAUSED | VIR_QEMU_PROCESS_START_AUTODESTROY) < 0) { virDomainAuditStart(vm, "migrated", false); - /* Note that we don't set an error here because qemuProcessStart - * should have already done that. - */ + if (qemuDomainObjEndJob(driver, vm) < 0) + vm = NULL; goto endjob; } @@ -2235,7 +2238,7 @@ stop: qemuProcessStop(driver, vm, VIR_DOMAIN_SHUTOFF_FAILED, 0); endjob: - if (!qemuMigrationJobFinish(driver, vm)) { + if (vm && !qemuMigrationJobFinish(driver, vm)) { vm = NULL; } goto cleanup; -- 1.8.1.4

2 2

[libvirt] [RFC] DHCP Relay agent functionality
by TJ 01 Mar '13

01 Mar '13

Recently I needed to implement functionality to operate a DHCP relay instead of dnsmasq's DHCP server on the virtual networks managed by libvirt. The primary benefit of operating a relay is that the central DHCP and DNS servers for the physical network can manage IP address allocation and hostname resolution for the entire network and, potentially, expose VMs via hostname and IP address on the public network too, as well as being able to monitor VM instance creation for resource planning. I originally implemented this functionality on libvirt 0.9.8 included with Ubuntu 12.04 as a hack to simply disable dnsmasq entirely and use dhcp-helper[1] (the DHCP relay written by Simon Kelley, author of dnsmaq) although I've constructed it so that another relay-agent could be used. After proving it works well I've reworked the code on the current libvirt master branch. If it's thought to be of use to the project please let me know. [1] http://www.thekelleys.org.uk/dhcp-helper/ The following changes since commit 34f1a618a5c4507f27f3f467b723c9119c1db3c7: conf: Avoid leaking of RNG device definition (2013-02-25 22:31:11 +0100) are available in the git repository at: git://github.com/iam-TJ/libvirt.git dhcp_relay_network for you to fetch changes up to dfc0609403106712b205e60b53b29dc850cad68d: docs: Describe the <dhcp> 'enable' and 'relay' attributes (2013-02-27 20:35:06 +0000) ---------------------------------------------------------------- TJ (10): conf: DHCP - add state for DHCP Relay and On/Off switch conf: Network - add ability to read/write XML DHCP state conf: Network - add pointers to enabled virNetworkIpDef DHCP settings conf: Network - keep track of active DHCP stanza in virNetworkDef network: Bridge - use IPv4 and IPv6 active DHCP stanza pointers network: Bridge - Add support for a DHCP Relay Agent network: Bridge - don't offer dnsmasq DHCP services when DHCP relay is enabled configure: Add DHCPRELAY to the set of external program definitions Add copyright attribution for DHCP relay functionality docs: Describe the <dhcp> 'enable' and 'relay' attributes configure.ac | 4 +++ docs/formatnetwork.html.in | 22 +++++++++++++- src/conf/network_conf.c | 36 +++++++++++++++++++--- src/conf/network_conf.h | 7 +++++ src/network/bridge_driver.c | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------- 5 files changed, 229 insertions(+), 55 deletions(-)

5 44

[libvirt] [trivial PATCH 1/1] Fix a message typo
by Serge Hallyn 28 Feb '13

28 Feb '13

As pointed out in https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1034661 The sentence "The function of PCI device addresses must less than 8" does not quite make sense. Update that to read "The function of PCI device addresses must be less than 8" Signed-off-by: Serge Hallyn <serge.hallyn(a)ubuntu.com> --- src/qemu/qemu_command.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index f8f3ade..201fac1 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1743,7 +1743,7 @@ qemuBuildDeviceAddressStr(virBufferPtr buf, if (info->addr.pci.function > 7) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("The function of PCI device addresses must " - "less than 8")); + "be less than 8")); return -1; } } else { -- 1.8.1.2

2 1

[libvirt] [PATCH] Revert hack for autodestroy in qemuProcessStop
by Daniel P. Berrange 28 Feb '13

28 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> This reverts the hack done in commit 568a6cda277f04ab9baaeb97490e548b7b608aa6 Author: Jiri Denemark <jdenemar(a)redhat.com> Date: Fri Feb 15 15:11:47 2013 +0100 qemu: Avoid deadlock in autodestroy since we now have a fix which avoids the deadlock scenario entirely --- src/qemu/qemu_conf.h | 4 ---- src/qemu/qemu_domain.h | 1 - src/qemu/qemu_process.c | 8 +------- 3 files changed, 1 insertion(+), 12 deletions(-) diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h index d547d97..6bb3dee 100644 --- a/src/qemu/qemu_conf.h +++ b/src/qemu/qemu_conf.h @@ -254,10 +254,6 @@ struct qemuDomainDiskInfo { int io_status; }; -/* - * To avoid a certain deadlock this callback must never call any - * virQEMUCloseCallbacks* API. - */ typedef virDomainObjPtr (*virQEMUCloseCallback)(virQEMUDriverPtr driver, virDomainObjPtr vm, virConnectPtr conn); diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h index 30e6b97..dacbb54 100644 --- a/src/qemu/qemu_domain.h +++ b/src/qemu/qemu_domain.h @@ -138,7 +138,6 @@ struct _qemuDomainObjPrivate { bool gotShutdown; bool beingDestroyed; - bool autoDestroyed; char *pidfile; int nvcpupids; diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 1b9eede..9f1507a 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4232,8 +4232,7 @@ void qemuProcessStop(virQEMUDriverPtr driver, qemuDomainCleanupRun(driver, vm); /* Stop autodestroy in case guest is restarted */ - if (!priv->autoDestroyed) - qemuProcessAutoDestroyRemove(driver, vm); + qemuProcessAutoDestroyRemove(driver, vm); /* now that we know it's stopped call the hook if present */ if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) { @@ -4614,13 +4613,8 @@ qemuProcessAutoDestroy(virQEMUDriverPtr driver, VIR_DEBUG("Killing domain"); - /* We need to prevent qemuProcessStop from removing this function from - * closeCallbacks since that would cause a deadlock. - */ - priv->autoDestroyed = true; qemuProcessStop(driver, dom, VIR_DOMAIN_SHUTOFF_DESTROYED, VIR_QEMU_PROCESS_STOP_MIGRATED); - priv->autoDestroyed = false; virDomainAuditStop(dom, "destroyed"); event = virDomainEventNewFromObj(dom, -- 1.7.11.7

2 1

[libvirt] [PATCH] Fix deadlock in QEMU close callback APIs
by Daniel P. Berrange 28 Feb '13

28 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> There is a lock ordering problem in the QEMU close callback APIs. When starting a guest we have a lock on the VM. We then set a autodestroy callback, which acquires a lock on the close callbacks. When running auto-destroy, we obtain a lock on the close callbacks, then run each callbacks - which obtains a lock on the VM. This causes deadlock if anyone tries to start a VM, while autodestroy is taking place. The fix is to do autodestroy in 2 phases. First obtain all the callbacks and remove them from the list under the close callback lock. Then invoke each callback from outside the close callback lock. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_conf.c | 106 ++++++++++++++++++++++++++++++++++++++++++-------- src/util/virnetlink.c | 5 ++- 2 files changed, 92 insertions(+), 19 deletions(-) diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 1cd4b7c..f3b09cf 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -797,20 +797,37 @@ virQEMUCloseCallbacksGet(virQEMUCloseCallbacksPtr closeCallbacks, return cb; } + +typedef struct _virQEMUCloseCallbacksListEntry virQEMUCloseCallbacksListEntry; +typedef virQEMUCloseCallbacksListEntry *virQEMUCloseCallbacksListEntryPtr; +struct _virQEMUCloseCallbacksListEntry { + unsigned char uuid[VIR_UUID_BUFLEN]; + virQEMUCloseCallback callback; +}; + + +typedef struct _virQEMUCloseCallbacksList virQEMUCloseCallbacksList; +typedef virQEMUCloseCallbacksList *virQEMUCloseCallbacksListPtr; +struct _virQEMUCloseCallbacksList { + size_t nentries; + virQEMUCloseCallbacksListEntryPtr entries; +}; + + struct virQEMUCloseCallbacksData { - virHashTablePtr list; - virQEMUDriverPtr driver; virConnectPtr conn; + virQEMUCloseCallbacksListPtr list; + bool oom; }; + static void -virQEMUCloseCallbacksRunOne(void *payload, +virQEMUCloseCallbacksGetOne(void *payload, const void *key, void *opaque) { struct virQEMUCloseCallbacksData *data = opaque; qemuDriverCloseDefPtr closeDef = payload; - virDomainObjPtr dom; const char *uuidstr = key; unsigned char uuid[VIR_UUID_BUFLEN]; @@ -823,35 +840,90 @@ virQEMUCloseCallbacksRunOne(void *payload, if (data->conn != closeDef->conn || !closeDef->cb) return; - if (!(dom = virDomainObjListFindByUUID(data->driver->domains, uuid))) { - VIR_DEBUG("No domain object with UUID %s", uuidstr); + if (VIR_EXPAND_N(data->list->entries, + data->list->nentries, 1) < 0) { + data->oom = true; return; } - dom = closeDef->cb(data->driver, dom, data->conn); - if (dom) - virObjectUnlock(dom); + memcpy(data->list->entries[data->list->nentries - 1].uuid, + uuid, VIR_UUID_BUFLEN); + data->list->entries[data->list->nentries - 1].callback = closeDef->cb; +} + + +static virQEMUCloseCallbacksListPtr +virQEMUCloseCallbacksGetForConn(virQEMUCloseCallbacksPtr closeCallbacks, + virConnectPtr conn) +{ + virQEMUCloseCallbacksListPtr list = NULL; + struct virQEMUCloseCallbacksData data; + + if (VIR_ALLOC(list) < 0) { + virReportOOMError(); + return NULL; + } + + data.conn = conn; + data.list = list; + data.oom = false; + + virHashForEach(closeCallbacks->list, virQEMUCloseCallbacksGetOne, &data); - virHashRemoveEntry(data->list, uuid); + if (data.oom) { + VIR_FREE(list->entries); + VIR_FREE(list); + virReportOOMError(); + return NULL; + } + + return list; } + void virQEMUCloseCallbacksRun(virQEMUCloseCallbacksPtr closeCallbacks, virConnectPtr conn, virQEMUDriverPtr driver) { - struct virQEMUCloseCallbacksData data = { - .driver = driver, - .conn = conn - }; + virQEMUCloseCallbacksListPtr list; + size_t i; VIR_DEBUG("conn=%p", conn); - virObjectLock(closeCallbacks); - data.list = closeCallbacks->list; - virHashForEach(data.list, virQEMUCloseCallbacksRunOne, &data); + /* We must not hold the lock while running the callbacks, + * so first we obtain the list of callbacks, then remove + * them all from the hash. At that point we can release + * the lock and run the callbacks safely. */ + virObjectLock(closeCallbacks); + list = virQEMUCloseCallbacksGetForConn(closeCallbacks, conn); + if (!list) + return; + + for (i = 0 ; i < list->nentries ; i++) { + virHashRemoveEntry(closeCallbacks->list, + list->entries[i].uuid); + } virObjectUnlock(closeCallbacks); + + for (i = 0 ; i < list->nentries ; i++) { + virDomainObjPtr vm; + + if (!(vm = virDomainObjListFindByUUID(driver->domains, + list->entries[i].uuid))) { + char uuidstr[VIR_UUID_STRING_BUFLEN]; + virUUIDFormat(list->entries[i].uuid, uuidstr); + VIR_DEBUG("No domain object with UUID %s", uuidstr); + continue; + } + + vm = list->entries[i].callback(driver, vm, conn); + if (vm) + virObjectUnlock(vm); + } + VIR_FREE(list->entries); + VIR_FREE(list); } struct _qemuSharedDiskEntry { diff --git a/src/util/virnetlink.c b/src/util/virnetlink.c index 0b36fdc..8b47ede 100644 --- a/src/util/virnetlink.c +++ b/src/util/virnetlink.c @@ -335,8 +335,9 @@ virNetlinkEventCallback(int watch, if (length == 0) return; if (length < 0) { - virReportSystemError(errno, - "%s", _("nl_recv returned with error")); + virReportError(VIR_ERR_INTERNAL_ERROR, + _("nl_recv returned with error: %s"), + nl_geterror(length)); return; } -- 1.7.11.7

2 5

[libvirt] [PATCH] Fix crash in QEMU auto-destroy with transient guests
by Daniel P. Berrange 28 Feb '13

28 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> When the auto-destroy callback runs it is supposed to return NULL if the virDomainObjPtr is no longer valid. It was not doing this for transient guests, so we tried to virObjectUnlock a mutex which had been freed. This often led to a crash. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_process.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index db95d6e..1b9eede 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4629,8 +4629,10 @@ qemuProcessAutoDestroy(virQEMUDriverPtr driver, if (!qemuDomainObjEndJob(driver, dom)) dom = NULL; - if (dom && !dom->persistent) + if (dom && !dom->persistent) { qemuDomainRemoveInactive(driver, dom); + dom = NULL; + } if (event) qemuDomainEventQueue(driver, event); -- 1.7.11.7

3 2

[libvirt] [PATCH v2] vl.c: Support multiple CPU ranges on -numa option
by Eduardo Habkost 28 Feb '13

28 Feb '13

This allows ":" to be used a separator between each CPU range, so the command-line may look like: -numa node,cpus=A-B:C-D Note that the following format, currently used by libvirt: -numa nodes,cpus=A-B,C-D will _not_ work, as "," is the option separator for the command-line option parser, and it would require changing the -numa option parsing code to handle "cpus" as a special case. Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com> --- Changes v2: - Use ":" as separator - Document the new format --- qemu-options.hx | 10 ++++++++-- vl.c | 14 +++++++++++++- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/qemu-options.hx b/qemu-options.hx index 4bc9c85..b135044 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -95,12 +95,18 @@ specifies the maximum number of hotpluggable CPUs. ETEXI DEF("numa", HAS_ARG, QEMU_OPTION_numa, - "-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL) + "-numa node[,mem=size][,cpus=cpu[-cpu][:...]][,nodeid=node]\n", QEMU_ARCH_ALL) STEXI @item -numa @var{opts} @findex -numa Simulate a multi node NUMA system. If mem and cpus are omitted, resources -are split equally. +are split equally. Multiple CPU ranges in the "cpus" option may be separated +by colons. e.g.: + +@example +-numa node,mem=1024,cpus=0-1:4-5:8-9 +-numa node,mem=1024,cpus=2-3:6-7:10-11 +@end example ETEXI DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd, diff --git a/vl.c b/vl.c index 955d2ff..fe632db 100644 --- a/vl.c +++ b/vl.c @@ -1244,7 +1244,7 @@ char *get_boot_devices_list(size_t *size) return list; } -static void numa_node_parse_cpus(int nodenr, const char *cpus) +static void numa_node_parse_cpu_range(int nodenr, const char *cpus) { char *endptr; unsigned long long value, endvalue; @@ -1288,6 +1288,18 @@ error: exit(1); } +static void numa_node_parse_cpus(int nodenr, const char *option) +{ + char **parts; + int i; + + parts = g_strsplit(option, ":", 0); + for (i = 0; parts[i]; i++) { + numa_node_parse_cpu_range(nodenr, parts[i]); + } + g_strfreev(parts); +} + static void numa_add(const char *optarg) { char option[128]; -- 1.8.1

6 30

[libvirt] virnettlscontexttest test fails on Fedora Rawhide x86_64
by Richard W.M. Jones 28 Feb '13

28 Feb '13

Still investigating, but the log is attached. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming blog: http://rwmj.wordpress.com Fedora now supports 80 OCaml packages (the OPEN alternative to F#)

2 2

[libvirt] [PATCHv2] qemu: fix graphics port allocation
by Ján Tomko 28 Feb '13

28 Feb '13

Only release ports that have been allocated before. This fixes these issues: * trying to release ports when qemuProcessStart fails before port allocation * trying to release the SPICE TLS port if spice_tls is 0 * failing to release SPICE port with autoport=off (when only one of them is -1) --- v1: https://www.redhat.com/archives/libvir-list/2013-February/msg01464.html Use a pair of booleans in domain private data instead of a new field in the domain definition. src/qemu/qemu_domain.h | 5 +++++ src/qemu/qemu_process.c | 28 +++++++++++++++++++--------- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h index 30e6b97..bac4d8b 100644 --- a/src/qemu/qemu_domain.h +++ b/src/qemu/qemu_domain.h @@ -163,6 +163,11 @@ struct _qemuDomainObjPrivate { qemuDomainCleanupCallback *cleanupCallbacks; size_t ncleanupCallbacks; size_t ncleanupCallbacks_max; + + /* Track port allocation state for SPICE + * (only one device is allowed per domain) */ + bool spicePortAllocated; + bool spiceTlsPortAllocated; }; struct qemuDomainWatchdogEvent diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index b9fdcd2..1442cc7 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3633,6 +3633,7 @@ int qemuProcessStart(virConnectPtr conn, } graphics->data.spice.port = port; + priv->spicePortAllocated = true; } if (cfg->spiceTLS && (graphics->data.spice.autoport || @@ -3645,10 +3646,12 @@ int qemuProcessStart(virConnectPtr conn, virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Unable to find an unused port for SPICE TLS")); virPortAllocatorRelease(driver->remotePorts, port); + priv->spicePortAllocated = false; goto cleanup; } graphics->data.spice.tlsPort = tlsPort; + priv->spiceTlsPortAllocated = true; } } @@ -4311,22 +4314,29 @@ retry: qemuProcessRemoveDomainStatus(driver, vm); - /* Remove VNC and Spice ports from port reservation bitmap, but only if - they were reserved by the driver (autoport=yes) + /* Remove VNC and SPICE ports from port reservation bitmap, but only if + they were reserved by the driver: + autoport = yes and non-zero port for VNC, + priv->spice(Tls)PortAllocated for SPICE. */ for (i = 0 ; i < vm->def->ngraphics; ++i) { virDomainGraphicsDefPtr graphics = vm->def->graphics[i]; if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC && - graphics->data.vnc.autoport) { + graphics->data.vnc.autoport && graphics->data.vnc.port) { ignore_value(virPortAllocatorRelease(driver->remotePorts, graphics->data.vnc.port)); } - if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE && - graphics->data.spice.autoport) { - ignore_value(virPortAllocatorRelease(driver->remotePorts, - graphics->data.spice.port)); - ignore_value(virPortAllocatorRelease(driver->remotePorts, - graphics->data.spice.tlsPort)); + if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) { + if (priv->spicePortAllocated) { + ignore_value(virPortAllocatorRelease(driver->remotePorts, + graphics->data.spice.port)); + priv->spicePortAllocated = false; + } + if (priv->spiceTlsPortAllocated) { + ignore_value(virPortAllocatorRelease(driver->remotePorts, + graphics->data.spice.tlsPort)); + priv->spiceTlsPortAllocated = false; + } } } -- 1.7.12.4

2 2

[libvirt] [PATCH 1/1] Clear PIIX3/PIIX4_USB capabilities for non-X86 platforms
by Li Zhang 28 Feb '13

28 Feb '13

From: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> Currently, PIIX3/PIIX4_USB capabilities are enabled for other platforms. Actually, it is only supported for X86. So this patch is to clear the capabilities for non-X86 platforms. Signed-off-by: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> --- src/conf/domain_conf.c | 1 + src/qemu/qemu_capabilities.c | 3 +++ src/qemu/qemu_command.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 995cf0c..d57334a 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -10453,6 +10453,7 @@ virDomainDefParseXML(virCapsPtr caps, VIR_FREE(nodes); /* If graphics are enabled, there's an implicit PS2 mouse */ + /* Todo: Add implicit USB mouse and keyboard for ppc64 */ if (def->ngraphics > 0) { virDomainInputDefPtr input; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 40022c1..ef5c69a 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -1307,8 +1307,11 @@ struct virQEMUCapsStringFlags virQEMUCapsObjectTypes[] = { { "hda-micro", QEMU_CAPS_HDA_MICRO }, { "ccid-card-emulated", QEMU_CAPS_CCID_EMULATED }, { "ccid-card-passthru", QEMU_CAPS_CCID_PASSTHRU }, +#if defined (__x86_64__) || \ + defined (__i386__) { "piix3-usb-uhci", QEMU_CAPS_PIIX3_USB_UHCI }, { "piix4-usb-uhci", QEMU_CAPS_PIIX4_USB_UHCI }, +#endif { "usb-ehci", QEMU_CAPS_USB_EHCI }, { "ich9-usb-ehci1", QEMU_CAPS_ICH9_USB_EHCI1 }, { "vt82c686b-usb-uhci", QEMU_CAPS_VT82C686B_USB_UHCI }, diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 1c9bfc9..0b18be0 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -5784,6 +5784,8 @@ qemuBuildCommandLine(virConnectPtr conn, } else if (cont->type == VIR_DOMAIN_CONTROLLER_TYPE_USB && cont->model == -1 && !virQEMUCapsGet(qemuCaps, QEMU_CAPS_PIIX3_USB_UHCI)) { + /* usblegacy is used for ppc64 temporarily */ + /* Todo: support -device xxx on ppc64 platform */ if (usblegacy) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", _("Multiple legacy USB controllers are " -- 1.7.10.1

2 9

[libvirt] [PATCHv3 0/5] snapshot revert-and-create
by Eric Blake 28 Feb '13

28 Feb '13

v2 was here: https://www.redhat.com/archives/libvir-list/2012-November/msg00818.html One patch from v2 has already been committed. This patch additionally adds a qemu implementation for the new flag, and I have tested creation of offline branches (I still need to test creation of a branch from a disk-only or online external snapshot). I've also started documenting my plans for a new revert FOLLOW flag, which updates to the current state of external files (rather than reverting completely to the point where the snapshot was taken); once that is working, then implementing the combination of createXML(LIVE|BRANCH) will really be creating the branch, then farming out to revert(FOLLOW) to switch over to the new branch. Eric Blake (5): snapshot: add revert-and-create branching of external snapshots snapshot: prepare to parse new XML snapshot: actually compute branch definition from XML snapshot: support revert-and-create branching in qemu snapshot: add another revert API flag docs/formatsnapshot.html.in | 16 ++++- docs/schemas/domainsnapshot.rng | 45 ++++++------ include/libvirt/libvirt.h.in | 6 ++ src/conf/snapshot_conf.c | 118 ++++++++++++++++++++++++++++--- src/conf/snapshot_conf.h | 2 + src/esx/esx_driver.c | 2 +- src/libvirt.c | 41 +++++++++-- src/qemu/qemu_driver.c | 50 +++++++++++-- src/vbox/vbox_tmpl.c | 2 +- tests/domainsnapshotxml2xmlin/branch.xml | 5 ++ tests/domainsnapshotxml2xmltest.c | 2 +- tools/virsh-snapshot.c | 44 +++++++++--- tools/virsh.pod | 25 ++++++- 13 files changed, 300 insertions(+), 58 deletions(-) create mode 100644 tests/domainsnapshotxml2xmlin/branch.xml -- 1.7.11.7

2 6

[libvirt] [PATCH v2] qemu: Don't fail to shutdown domains with unresponsive agent
by Michal Privoznik 28 Feb '13

28 Feb '13

Currently, qemuDomainShutdownFlags() chooses the agent method of shutdown whenever the agent is configured. However, this assumption is not enough as the guest agent may be unresponsive at the moment. So unless guest agent method has been explicitly requested, we should fall back to the ACPI method. --- diff to v1: - Rework some conditions as Eric suggested in v1 src/qemu/qemu_driver.c | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 1e96915..1e96aa4 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1702,40 +1702,40 @@ static int qemuDomainShutdownFlags(virDomainPtr dom, unsigned int flags) { virDomainObjPtr vm; int ret = -1; qemuDomainObjPrivatePtr priv; - bool useAgent = false; + bool useAgent = false, agentRequested, acpiRequested; virCheckFlags(VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN | VIR_DOMAIN_SHUTDOWN_GUEST_AGENT, -1); - /* At most one of these two flags should be set. */ - if ((flags & VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN) && - (flags & VIR_DOMAIN_SHUTDOWN_GUEST_AGENT)) { - virReportInvalidArg(flags, "%s", - _("flags for acpi power button and guest agent are mutually exclusive")); - return -1; - } - if (!(vm = qemuDomObjFromDomain(dom))) goto cleanup; priv = vm->privateData; + agentRequested = flags & VIR_DOMAIN_SHUTDOWN_GUEST_AGENT; + acpiRequested = flags & VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN; - if ((flags & VIR_DOMAIN_SHUTDOWN_GUEST_AGENT) || - (!(flags & VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN) && - priv->agent)) + /* Prefer agent unless we were requested to not to. */ + if (agentRequested || (!flags && priv->agent)) useAgent = true; - if (useAgent) { - if (priv->agentError) { + if (priv->agentError) { + if (agentRequested && !acpiRequested) { virReportError(VIR_ERR_AGENT_UNRESPONSIVE, "%s", _("QEMU guest agent is not " "available due to an error")); goto cleanup; + } else { + useAgent = false; } - if (!priv->agent) { + } + + if (!priv->agent) { + if (agentRequested && !acpiRequested) { virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED, "%s", _("QEMU guest agent is not configured")); goto cleanup; + } else { + useAgent = false; } } @@ -1752,7 +1752,13 @@ static int qemuDomainShutdownFlags(virDomainPtr dom, unsigned int flags) { qemuDomainObjEnterAgent(vm); ret = qemuAgentShutdown(priv->agent, QEMU_AGENT_SHUTDOWN_POWERDOWN); qemuDomainObjExitAgent(vm); - } else { + } + + /* If we are not enforced to use just an agent, try ACPI + * shutdown as well in case agent did not succeed. + */ + if (!useAgent || + (ret < 0 && (acpiRequested || !flags))) { qemuDomainSetFakeReboot(driver, vm, false); qemuDomainObjEnterMonitor(driver, vm); -- 1.8.1.4

2 4

[libvirt] a script for libvirt-llxc + systemd on Fedora18
by Kamezawa Hiroyuki 28 Feb '13

28 Feb '13

Hi. At playing libvirt-lxc on Fedora18, I found that the user needs some workarounds to run /sbin/init as the root process of container. With Fedora15, I found this https://gist.github.com/peo3/1142202. And I know virt-sandbox-service have some clever way to understand RPM to make domain running with a service. Here is a script I wrote for F18 inspired by above two. Creating LXC domain running systemd as /init program. I'd like to get some feedback....and ...can't this kind of scripts be maintained by some virt-tools project ? Anyway, playing with lxc is fun. I'm glad if someone makes this script better :) == A user can create a lxc container by # ./lxc_systemd_setup.py -r -n Test This will generate my.xml and lxc file tree on /opt/lxc/Test # virsh -c lxc:/// define my.xml # virsh -c lxc:/// start my.xml This domain has following characteristics - /usr is bind mounted to host's /usr - all files other than files in /usr are copied - systemd and pam modules are tweaked a bit - eth0 is up by dhcp. - systemd, rsyslog, sshd is running. Users can add rpm package as # ./lxc_systemd_setup.py -r -n Test -a httpd some options may not work because of my bad skills. ==lxc_systemd_setup.py== #!/usr/bin/python # # A scripts for creating LXC domain where some daemons are running under systemd. # Tested with Fedora18, running systemd, rsyslog, sshd in a container at default. # # Most config files, including all security settings as passwd, selinux, # ssl/pki files are copied from the host. So, please fix them before # running a domain. # # New root dir will be /opt/lxc/<domain name> at default and domain XML # definition will be saved as my.xml # # All instllation under /usr is shared among containres/host, binaries are # not copied at all. /etc and /var are copied. So, you can adjust config files # under container as you like. # # for easy creation, run # # lxc_systemd_setup.py -n Test -r # # virsh -c lxc:/// define my.xml # # virsh -c lxc:/// start Test --console # # This will build a lxc root filesystem under /opt/lxc/Test and copy # required files under it. /usr will be shared with the host. # # to add some packages, pass package name with '-a' option. But this script doesn't # handle dependency of RPM, at all. please take care of it. # # for running httpd. # # lxc_systemd_setup.py -n Test -r -a httpd # _and_ you need to fix hostname lookup problem to run httpd. i.e. you may need to fix # some files under /etc.... # # please see # # lxc_systemd_setup.py --help # for other options. some may not work ;) # import sys, os, shutil from subprocess import Popen, PIPE from optparse import OptionParser,OptionGroup import re import rpm parser = OptionParser() parser.add_option('-p', '--prefix', action='store', default='/opt/lxc', type='string', dest='pathname', help='prefix of guest root path') parser.add_option('-n', '--name', action='store', default='_unknown', type='string', dest='domain_name', help='name of domain') parser.add_option('-o', '--out', action='store', default='my.xml', type='string', dest='def_file', help='name of generated xml def') parser.add_option('-r', '--renew', action='store_true', default=False, dest='renew_tree', help='delete existing tree if exists') parser.add_option('-D', '--destroy', action='store_true', default=False, dest='destroy_tree', help='destroy existing tree and quit') parser.add_option('-f', '--force', action='store_true', default=False, dest='force', help='update all files without checking timestamp') parser.add_option('-a','--add-packages', action='append', type='string', dest='package_list', help='copy package config to container') parser.add_option('-s','--skip-packages', action='append', type='string', dest='skip_list', help='skip packages') parser.add_option('-m','--memory', action='store', default='1024000', type='str', dest='memory', help='memory size of domain') parser.add_option('-H','--hostname', action='store', default='lxc', type='str', dest='hostname', help='hostname of domain') (options, args) = parser.parse_args(sys.argv) # # Utility functions. # # # Remove all files under domain ROOT. # def destroy_all(path) : if (not os.path.exists(path)) : return shutil.rmtree(path, ignore_errors=True) # # Check a file in a container is newer than hosts. # def file_is_newer(a, b) : time_a = os.stat(a).st_mtime time_b = os.stat(b).st_mtime return a > b # # Check Host's distro. # def check_version() : useRPM=True version="unknown" if (os.path.exists('/etc/redhat-release')) : with open('/etc/redhat-release') as f: version_string = f.readline() if (re.match("Fedora release 18.+$", version_string)) : version = "Fedora18" else : useRPM=False return (version, useRPM) # # directories created at domain creation (tested with Fedora 18) # ROOTDIR= options.pathname + "/" + options.domain_name class InstallInfo : def __init__(self) : self.DIRS = [] self.BINDDIRS = [] self.SYMLINKS=[] self.PACKAGES = [] self.FILES = [] self.MERGED = [] def add_dirs(self, x) : if (isinstance(x, str)) : x = [x] self.DIRS = self.DIRS + x def dirs(self) : return self.DIRS def add_files(self, x) : if (isinstance(x, str)) : x = [x] self.FILES += x def files(self) : return self.FILES def add_binds(self, x) : if (isinstance(x, str)) : x = [x] self.BINDDIRS = self.BINDDIRS + x def binds(self) : return self.BINDDIRS def add_links(self, x) : self.SYMLINKS = self.SYMLINKS + x def links(self) : return self.SYMLINKS def add_packages(self, x) : self.PACKAGES = self.PACKAGES + x def packages(self) : return self.PACKAGES def merge(self) : self.DIRS = list(set(self.DIRS)) self.FILES = list(set(self.FILES)) self.BINDDIRS = sorted(list(set(self.BINDDIRS))) ret = True ents =[] paths = [] for ent in self.DIRS : ents.append((ent, 'dir', '')) paths.append(ent) for ent in self.FILES : ents.append((ent, 'file', '')) paths.append(ent) for ent in self.SYMLINKS : ents.append((ent[0], 'link', ent[1])) paths.append(ent[0]) if (len(paths) - len(list(set(paths)))) : ret = False self.MERGED = sorted(ents) return ret def merged(self) : return self.MERGED # # Gather RPM information and copy config files to proper place. # class CopyRPMHandler: def __init__(self, name) : self.name = name self.files = [] self.service = "" def verify(self) : ts = rpm.TransactionSet() mi = ts.dbMatch('name', self.name) if not mi : return False # get list of files. for h in mi : myhead = h break fi = myhead.fiFromHeader() for x in fi : self.files.append(x[0]); self.test_service() self.strip_binds() return True def paths(self) : return self.files # # check all files in RPM which are not under bind-mount. # def strip_binds(self) : # remove all ents under /usr for avoiding copy. temp = self.files self.files = [] for file in temp : if (file == '') : continue if (re.match("/usr/.+$", file)) : continue if (re.match("/bin/.+$", file)) : continue if (re.match("/lib/.+$", file)) : continue if (re.match("/sbin/.+$", file)) : continue if (re.match("/lib64/.+$", file)) : continue self.files.append(file) self.files.sort() return def test_service(self) : for file in self.files : if (re.match("/usr/lib/systemd/system.+\.service$", file)) : ent.service = file # # Functions for workarounds. # # # systemd: create our own basic.target for avoiding some startups. # def systemd_tune() : # # we need to avoid some special services by systemd. # modify basic.target and avoid them. # filename = ROOTDIR + "/etc/systemd/system/basic.target" data="""[Unit] Description=Basic System Documentation=man:systemd.special(7) Requires=systemd-tmpfiles-setup.service sockets.target After=systemd-tmpfiles-setup.service sockets.target RefuseManualStart=yes """ with open(filename,"w") as f: f.write(data) # # we need getty only with tty1 # os.symlink("/usr/lib/systemd/system/getty@.service", ROOTDIR + "/etc/systemd/system/getty.target.wants/getty(a)tty1.service") # # Create ifcfg-eth0 and add service to bring up it. # def eth0_service() : # # /etc/sysconfig/network is generated by annaconda and we cannot # find it by rpms. # filename = ROOTDIR + "/etc/sysconfig/network" shutil.copy("/etc/sysconfig/network", filename); # # ifconfig setting for eth0 # filename = ROOTDIR + "/etc/sysconfig/network-scripts/ifcfg-eth0" data="""DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes NAME=eth0 TYPE=Ethernet """ with open(filename, "w") as f: f.write(data) print "Creating %s" % filename filename = ROOTDIR + "/etc/systemd/system/lxc-eth0.service" data="""[Unit] Before=multi-user.target Conflicts=shutdown.target Description=bring up eth0 in this container [Service] ExecStart=/usr/sbin/ifup eth0 Type=simple """ with open(filename, "w") as f: f.write(data) print "Creating %s" % filename # # Bring up this. # filename = ROOTDIR + "/etc/systemd/system/basic.target.wants/lxc-eth0.service" src = "/etc/systemd/system/lxc-eth0.service" os.symlink(src, filename) # # Make fstab empty # def empty_fstab() : filename = ROOTDIR + "/etc/fstab" with open(filename, "w") as f: f.truncate(0) # # in Fedora18, pam's pam_loginuid.so doesn't work under container # we need to disable it. # def pam_tune() : pamdir = ROOTDIR + "/etc/pam.d" for root, dirs, files in os.walk(pamdir) : for path in files : path = root + "/" + path if (os.path.islink(path)) : continue data ="" with open(path) as f: for line in f : if (re.match("^.+pam_loginuid.so.*$", line)) : line = "#" + line data += line with open(path, "w") as f: f.write(data) # # securetty set up for login via system console. # def securetty_tune() : path = ROOTDIR + "/etc/securetty" with open(path, "a") as f: f.write("pts/0\n") # # set hostname of guest domain. # def hostname_modify() : path = ROOTDIR + "/etc/hostname" with open(path, "w") as f: f.write(options.hostname + "\n") # # parse memory size. # def parse_memory(data) : if data[-1] == 'K' : x = int(data[0:-1]) return str(x * 1024) elif data[-1] == 'M' : x = int(data[0:-1]) return str(x * 1024 * 1024) elif data[-1] == 'G' : x = int(data[0:-1]) return str(x * 1024 * 1024 * 1024) else : return data # # Main routine starts here ! # version, useRPM = check_version() if (not useRPM) : print 'now, we can handle RPM only' exit(1) info = InstallInfo() # Build a information. # # At first, gather required RPM information and some tweaks for distro. # if (version == 'Fedora18') : # # now, dont'handle yum and rpm info in container, so create fake dirs # instead of copying yum info by RPM. # info.add_dirs(["/etc/yum", "/etc/yum/protected.d", "/etc/yum/pluginconf.d","/etc/yum/vars"]) # # We share /usr between host and guest. # info.add_binds(["/usr"]) # # For Fedora18, we need following copies of configs packages at least. # info.add_packages(["filesystem","setup","rpm", "selinux-policy"]) info.add_packages(["systemd", "dbus", "initscripts","util-linux"]) info.add_packages(["pam","passwd", "crontabs","kmod","logrotate","rsyslog"]) info.add_packages(["openssh","openssh-server", "chkconfig","authconfig"]) info.add_packages(["glibc", "mailcap"]) # symlink and dirs for systemd info.add_links([["/etc/systemd/system/default.target", "/lib/systemd/system/multi-user.target"]]) info.add_dirs(["/etc/systemd/system/basic.target.wants"]) info.add_dirs(["/etc/systemd/system/default.target.wants"]) info.add_dirs(["/etc/systemd/system/getty.target.wants"]) info.add_dirs(["/etc/systemd/system/multi-user.target.wants"]) info.add_dirs(["/etc/systemd/system/sockets.target.wants"]) info.add_dirs(["/etc/systemd/system/sysinit.target.wants"]) info.add_dirs(["/etc/systemd/system/system-update.target.wants"]) # # Merge package list # package_names = info.packages() if (options.package_list) : package_names += options.package_list # Uniq. package_names = list(set(package_names)) # # delete unnecessary packages from list. # if (options.skip_list) : for name in options.skip_list : if (name in package_names) : package_names.remove(name) # # Verify package list (check installation of packages) # packages = [] error = False if (useRPM) : for name in package_names : ent = CopyRPMHandler(name) if (ent.verify()) : packages.append(ent) else : print "Couldn't find a package [%s] in RPM DB." % (name) error = True if (error) : exit(1) # # Now, we confirmed all RPMS required are installed in the host. # service_files = [] # # Extract dir,symlink,file information from RPMS. Later, we'll copy all # files other than /usr. # for ent in packages : for path in ent.paths() : if (not os.path.exists(path)) : continue if (os.path.islink(path)) : src = os.readlink(path) info.add_links([[path, src]]) elif (os.path.isfile(path)) : info.add_files(path) elif (os.path.isdir(path)) : info.add_dirs(path) if (ent.service != ""): service_files.append(ent.service) # # Uniq and sort it. # if (not info.merge()) : print "some confilction of files may happen..." # # Check Domain name is passed. # if (options.domain_name == '_unknown') : print "Guest Domain name must be specified" exit(1) # # Destroy tree. # if (options.destroy_tree) : destroy_all(ROOTDIR) exit(0) # # At first, clear tree if required. # (*) the scirpt may not work if we don't destroy the tree .... # if (os.path.exists(ROOTDIR)) : if (options.renew_tree) : destroy_all(ROOTDIR) # Create root dir try: os.mkdir(ROOTDIR) except: print "cannot create root dir %s" % ROOTDIR exit(1) # Ok, make world based on information gathered from RPMS. for ents in info.merged() : guestpath = ROOTDIR + ents[0] try: if (ents[1] == 'dir') : if (not os.path.exists(guestpath)) : print "Creating dir %s" % (guestpath) os.makedirs(guestpath) elif (ents[1] == 'link') : if (not os.path.exists(guestpath)) : print "Creating symlink %s => %s" % (guestpath, ents[2]) os.symlink(ents[2], guestpath) elif (ents[1] == 'file') : if (options.force or not os.path.exists(guestpath) or file_is_newer(ents[0], guestpath)) : print "Copyfile %s" % (guestpath) shutil.copy(ents[0], guestpath) except: print "error at creating tree %s" % guestpath exit(1) # # setup service files if necessary. # for file in service_files : service = os.path.basename(file) p = re.compile('WantedBy=(.+)$') for line in open(file, 'r') : m = p.match(line) if (m) : target = m.group(1) pathname = ROOTDIR + "/etc/systemd/system/" + target + ".wants/" + service print "%s=>%s" % (pathname, file) os.symlink(file, pathname) # # Tweak system settings. # if (version == "Fedora18") : # diable some services. dir = ROOTDIR + "/etc/systemd/system/" os.symlink("/dev/null", dir + "sysinit.target") os.symlink("/dev/null", dir + "console-shell.service") os.symlink("/dev/null", dir + "fedora-readonly.service") os.symlink("/dev/null", dir + "fedora-storage-init.service") systemd_tune() # modify basic.target etc... eth0_service() # bringup eth0 without udev empty_fstab() # make /etc/fstab empty pam_tune() # disable some pam module securetty_tune() # add pts/0 to securetty hostname_modify() # # Generate a Domain Def. # domain = r""" <domain type='lxc'> <name>%(NAME)s</name> <memory unit='bytes'>%(MEMORY)s</memory> <vcpu>1</vcpu> <os> <type arch='x86_64'>exe</type> <init>/sbin/init</init> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='%(ROOTDIR)s'/> <target dir='/'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/usr'/> <target dir='/usr'/> </filesystem> <filesystem type='ram'> <source usage='%(MEMORY)s'/> <target dir='/tmp'/> </filesystem> <filesystem type='ram'> <source usage='%(MEMORY)s'/> <target dir='/dev/shm'/> </filesystem> <interface type="network"> <source network="default"/> </interface> <console type='pty'> <target type='lxc' port='0'/> </console> </devices> </domain> """ % {'NAME':options.domain_name, 'MEMORY': parse_memory(options.memory), 'ROOTDIR':ROOTDIR} with open(options.def_file, "w") as f : f.write(domain)

3 2

[libvirt] [PATCH] qemu: virConnectGetVersion returns bogus value
by Viktor Mihajlovski 28 Feb '13

28 Feb '13

The unitialized local variable qemuVersion can cause an random value to be returned for the hypervisor version, observable with virsh version. Introduced by commit b46f7f4a0b96c2d2d01d64d960bd7bc90dc16b0c Signed-off-by: Viktor Mihajlovski <mihajlov(a)linux.vnet.ibm.com> --- src/qemu/qemu_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 0f6a431..825babd 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1382,7 +1382,7 @@ cleanup: static int qemuGetVersion(virConnectPtr conn, unsigned long *version) { virQEMUDriverPtr driver = conn->privateData; int ret = -1; - unsigned int qemuVersion; + unsigned int qemuVersion = 0; virCapsPtr caps = NULL; if (!(caps = virQEMUDriverGetCapabilities(driver, false))) -- 1.7.9.5

2 1

[libvirt] [PATCH 1/1] Remove contiguous CPU indexes assumption
by Li Zhang 28 Feb '13

28 Feb '13

From: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> When getting CPUs' information, it assumes that CPU indexes are not contiguous. But for ppc64 platform, CPU indexes are not contiguous because SMT is needed to be disabled, so CPU information is not right on ppc64 and vpuinfo, vcpupin can't work corretly. This patch is to remove the assumption to be compatible with ppc64. Test: 4 vcpus are assigned to one VM and execute vcpuinfo command. Without patch: There is only one vcpu informaion can be listed. With patch: All vcpus' information can be listed correctly. Signed-off-by: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> --- src/qemu/qemu_monitor_json.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index 9991a0a..e130f8c 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -1230,13 +1230,6 @@ qemuMonitorJSONExtractCPUInfo(virJSONValuePtr reply, goto cleanup; } - if (cpu != i) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("unexpected cpu index %d expecting %d"), - i, cpu); - goto cleanup; - } - threads[i] = thread; } -- 1.7.10.1

2 4

[libvirt] [PATCH 0/4] Add cpuset support for LXC
by Gao feng 28 Feb '13

28 Feb '13

This patchset intend to add cpuset support for LXC. in order to don't create too many redundant codes, this patchset also rename some functions. Gao feng (4): rename qemuGetNumadAdvice to virDomainGetNumadAdvice LXC: allow uses advisory nodeset from querying numad remove the redundant codes LXC: add cpuset support for lxc src/conf/domain_conf.c | 144 ++++++++++++++++++++++++++++++++++++++++++ src/conf/domain_conf.h | 4 ++ src/libvirt_private.syms | 3 +- src/lxc/lxc_cgroup.c | 58 ++++++++++++++++- src/lxc/lxc_cgroup.h | 2 +- src/lxc/lxc_controller.c | 117 +++++++++-------------------------- src/qemu/qemu_process.c | 158 ++--------------------------------------------- 7 files changed, 242 insertions(+), 244 deletions(-) -- 1.7.11.7

2 9

[libvirt] [PATCH] maint: fix typo in network docs
by Eric Blake 28 Feb '13

28 Feb '13

* docs/formatnetwork.html.in: Spell variation correctly. --- Pushing under the trivial rule. docs/formatnetwork.html.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 41a83fa..4dd0415 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -780,7 +780,7 @@ </network></pre> <p> - Below is another IPv6 varition. Instead of a dhcp range being + Below is another IPv6 variation. Instead of a dhcp range being specified, this example has a couple of IPv6 host definitions. Note that most of the dhcp host definitions use an "id" (client id or DUID) since this has proven to be a more reliable way -- 1.8.1.2

1 0

[libvirt] Compile libvirt V1.0.1 error
by harryxiyou 28 Feb '13

28 Feb '13

Hi all, When i compiled libvirt like following 1. git clone git://libvirt.org/libvirt.git；cd libvirt 2. git reset --hard v1.0.1 3. wget http://cloudxy.googlecode.com/svn/branches/hlfs/person/harry/hlfs/patches/h… 4. wget http://cloudxy.googlecode.com/svn/branches/hlfs/person/harry/hlfs/patches/h… 5. git apply hlfs_driver_for_libvirt_network_disk.patch 6. git apply hlfs_driver_for_libvirt_add_classpath.patch 7. ./autogen.sh 8. ./configure 9. make i got following errors. [...] cc1: error: AVA_HOME/include: No such file or directory [-Werror] cc1: error: AVA_HOME/include/linux: No such file or directory [-Werror] cc1: all warnings being treated as errors make[3]: *** [libvirt_driver_storage_impl_la-storage_driver.lo] Error 1 make[3]: Leaving directory `/home/jiawei/workshop1/libvirt/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/jiawei/workshop1/libvirt/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/jiawei/workshop1/libvirt' make: *** [all] Error 2 It seems that the errors have no relationship with HLFS(the patches i patched) but AVA_HOME. Could anyone give me some suggestions? Thanks in advance ;-) -- Thanks Harry Wei

2 4

Re: [libvirt] [Dnsmasq-discuss] Chaining instances?
by Laine Stump 28 Feb '13

28 Feb '13

This discussion should really be taking place on libvir-list - I'm Cc'ing it there. On 02/24/2013 04:11 PM, TJ wrote: > On 24/02/13 19:19, Laine Stump wrote: >> On 02/24/2013 05:09 AM, TJ wrote: >>> I wondered if maybe configuring the libvirtd dnsmasq instances to be dhcp proxies for the LAN dnsmasq, and use multiple dhcp-range's with tags might do it? >>> >>> My brain is a bit fried right now having had to fix several bugs in vmbuilder and libvirt, plus add new functionality to libvirtd to allow its dnsmasq instance to read a conf-file and use a separate log-facility, >> What you're talking about doing sounds *very* useful to have supported >> directly in libvirt, but you may want to contact libvirt's upstream >> developers (at libvir-list(a)redhat.com, or on irc.oftc.net in #virt) >> prior to expending a lot of effort on libvirt code - in general a >> problem may already be solved in a different manner, or somebody else >> may already be working on it. Failing that, there may have already been >> considerable debate on a particular subject, and a path to a solution >> generally agreed on, but with nobody yet working on the code. > It turns out that what I need(ed) to do was completely *disable* libvirt's use of dnsmasq > and instead use Simon's related "dhcp-helper" program which acts as a full dhcp-relay using, f.e: > > /usr/sbin/dhcp-helper -u libvirt-dnsmasq -i virbr1 -b eth0 > > This forwards all requests to the primary dnsmasq DHCP server on the LAN which matches against the > appropriate dhcp-range: > > # physical network leases > dhcp-range=set:phys,10.254.251.50,10.254.251.199,255.255.255.0,1440m > # subnet for VMs on server1 > dhcp-range=set:vmlan1,10.254.1.100,10.254.1.199,255.255.255.0,1440m > # default route (gateway) > dhcp-option=tag:phys,option:router,10.254.251.1 > dhcp-option=tag:vmlan1,option:router,10.254.1.1 > # DNS server > dhcp-option=6,10.254.251.1 > > > To that end this evening I added two additional options to libvirt: > > <dnsmasq enabled='true'/> > <dhcphelper enabled='false'/> libvirt's XML should remain implementation-agnostic. We don't want to have an option to disable the specific implementation of dns+dhcp called "dnsmasq"; rather we want to be able to enable/disable a network's dhcp server and/or dns server. (The reason for this is that we want to leave the door open for someone to implement a different backend using a different dhcp server and/or dns server and be able to use the same configuration.) We have actually previously discussed disabling dns and/or dhcp (see http://www.redhat.com/archives/libvir-list/2012-November/msg00861.html) It is already possible to completely disable dhcp - simply don't include a <dhcp> element in the network definition. As for dns, from the very beginning dns has been *always* enabled on all networks, so even though there is a <dns> element, simply having not having one is not a valid way to say "no dns server" (as it would cause backward compatibility problems with existing installations). Instead, the conclusion of the above-mentioned thread was that the proper way to handle this would be to add an "enable" element to the existing <dns> element, which would default to "yes". To disable libvirt-supplied dns services for a subnet, you would just put: <dns enable='no'/> in the network definition. In the case that dns had enable='no' AND there was no <dhcp> element, dnsmasq simply wouldn't be started at all. That hasn't been implemented yet, but shouldn't be too complex to do. As for dhcp-helper, aside from the fact that again you've created an option that is specific to a particular implementation of what is needed, that command isn't universally available anyway (it's not in any package for Fedora/RHEL, for example), and I'm not sure that it's really necessary to have it started up by libvirt anyway - can it detect newly created/upped interfaces as dnsmasq can? If so, it could be started up by regular host system config even before libvirt was started. > > These are the default values when the options are *not* defined. They allow the admin to disable dnsmasq entirely: > > <dnsmasq enabled='false'/> > > and to enable dhcp-helper: > > <dhcphelper enabled='true'/> > > Using two new functions: > > int networkBuildDhcphelperArgv(...) > int networkBuildDhcpHelperCommandLine(...) > > the existing function: > > int networkStartDhcpDaemon(...) > > is able to launch either or both of dnsmasq and dhcp-helper with the correct options. > > dhcp-helper's "-i" option is filled from network->def->bridge and its "-b" option is taken from > the first forward device declared in a <forward dev='?'/> or <interface dev='?'/>. If no forward > device is declared it throws a VIR_ERR_INVALID_INTERFACE error with appropriate explanatory text. > > >

2 4

[libvirt] q35 machine type and libvirt.
by Laine Stump 28 Feb '13

28 Feb '13

Now that qemu is getting the q35 machine type, libvirt needs to support it. As far as I understand, from libvirt's point of view, q35 is just another x86_64 system, but with a different set of implicit devices, and possibly some extra rules limiting which devices can be plugged into which bus/slot on the guest. That means that in order to support it, we will need to recognize when a q35-based machine type is being created, and auto-add all the implicit devices to libvirt's config model for that domain, then pay attention to the extra rules when assigning addresses for all the user-added devices. We already add implicit controllers/devices for pc-based machine types; as a matter of fact, currently, libvirt improperly assumes (for the purposes of adding implicit devices) that *every* virtual machine is based on the "pc" machine type (or rather it just doesn't pay attention), so it always adds all the implicit devices for a pc machine type for every domain. This of course is already incorrect for many (probably all?) non-x86 machine types, even before we add q35 into the mix. To fix this, it might be reasonable (and arguably, it's necessary to fix the problem in a backward-compatible manner) to just setup a table of machinetype ==> implicit device lists, look up the machine type in this table, and add the devices needed for that machine type. This goes against libvirt's longstanding view of machinetype as being an opaque value that it merely passes through to qemu, but it's manageable for the existing machine types (even including q35), since it's a finite set. But it starts to be a pain to maintain when you think about future additions - yet another case where new functionality in qemu will require an update to libvirt before it can be fully used via libvirt. In the long term, it would be very useful / more easily maintainable to have a qemu status command available via QMP which would return the list of implicit devices (and their PCI addresses) for any requested machine type. It would be necessary that this command be callable multiple times within a single execution of qemu, giving it a different machinetype each time. This way libvirt could first query the list of available machinetypes in this particular qemu binary, then request the list of implicit devices for each machine type (libvirt runs each available qemu binary *once* the first time it's requested, and caches all such capabilities information so that it doesn't need to re-run qemu again and again). My limited understanding of qemu's code is that qemu itself doesn't have a table of this information as data, but instead has lines of code that are executed to create it, thus making it impractical to provide the list of devices for a machinetype without actually instantiating a machine of that type. What's the feasibility of adding such a capability (and in the process likely making the list of implicit devices in qemu itself table/data driven rather than constructed with lines of code). More questions: 1) It seems that the exact list of devices for the basic q35 machine type hasn't been settled on yet, is that correct? 2) Are there other issues aside from implicit controller devices I need to consider for q35? For example, are there any devices that (as I recall is the case for some devices on "pc") may or may not be present, but if they are present they are always at a particular PCI address (meaning that address must be reserved)? I've also just learned that certain types of PCIe devices must be plugged into certain locations on the guest bus? ("root complex" devices - is there a good source of background info to learn the meaning of terms like that, and the rules of engagement? libvirt will need to know/follow these rules.) 3) What new types of devices/controllers must be supported for a properly functioning q35 machine?

6 8

[libvirt] [PATCH RESEND] Add support for <option> tag in network config
by Pieter Hollants 27 Feb '13

27 Feb '13

This patch adds support for a new <option>-Tag in the <dhcp> block of network configs, based on a subset of the fifth proposal by Laine Stump in the mailing list discussion at https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html. Any such defined option will result in a dhcp-option=<number>,"<value>" statement in the generated dnsmasq configuration file. Currently, DHCP options can be specified by number only and there is no whitelisting or blacklisting of option numbers, which should probably be added. Signed-off-by: Pieter Hollants <pieter(a)hollants.com> --- AUTHORS.in | 1 + docs/schemas/network.rng | 6 +++ docs/schemas/networkcommon.rng | 6 +++ src/conf/network_conf.c | 54 +++++++++++++++++++++ src/conf/network_conf.h | 10 ++++ src/network/bridge_driver.c | 10 ++++ tests/networkxml2xmlin/netboot-network.xml | 1 + tests/networkxml2xmlin/netboot-proxy-network.xml | 1 + tests/networkxml2xmlout/netboot-network.xml | 1 + tests/networkxml2xmlout/netboot-proxy-network.xml | 1 + 10 Dateien geändert, 91 Zeilen hinzugefügt(+) diff --git a/AUTHORS.in b/AUTHORS.in index 39fe68d..074185e 100644 --- a/AUTHORS.in +++ b/AUTHORS.in @@ -74,6 +74,7 @@ Michel Ponceau <michel.ponceau(a)bull.net> Nobuhiro Itou <fj0873gn(a)aa.jp.fujitsu.com> Pete Vetere <pvetere(a)redhat.com> Philippe Berthault <philippe.berthault(a)Bull.net> +Pieter Hollants <pieter(a)hollants.com> Saori Fukuta <fukuta.saori(a)jp.fujitsu.com> Shigeki Sakamoto <fj0588di(a)aa.jp.fujitsu.com> Shuveb Hussain <shuveb(a)binarykarma.com> diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 09d7c73..a2ce1c9 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -293,6 +293,12 @@ </optional> </element> </optional> + <zeroOrMore> + <element name="option"> + <attribute name="number"><ref name="unsignedByte"/></attribute> + <attribute name="value"><text/></attribute> + </element> + </zeroOrMore> </element> </optional> </element> diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng index 51ff759..3510928 100644 --- a/docs/schemas/networkcommon.rng +++ b/docs/schemas/networkcommon.rng @@ -173,6 +173,12 @@ </data> </define> + <define name='unsignedByte'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">255</param> + </data> + </define> <define name='unsignedShort'> <data type='integer'> <param name="minInclusive">0</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index 3604ff7..9d84c7e 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -777,6 +777,45 @@ cleanup: } static int +virNetworkDHCPOptionDefParseXML(const char *networkName, + xmlNodePtr node, + virNetworkDHCPOptionDefPtr option) +{ + char *number = NULL; + int ret = -1; + + if (!(number = virXMLPropString(node, "number"))) { + virReportError(VIR_ERR_XML_ERROR, + _("Option definition in IPv4 network '%s' " + "must have number attribute"), + networkName); + goto cleanup; + } + if (number && + virStrToLong_ui(number, NULL, 10, &option->number) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Cannot parse <option> 'number' attribute")); + goto cleanup; + } + /* TODO: either whitelist numbers or blacklist numbers already occupied + * by other XML statements (eg. submask) */ + if (!(option->value = virXMLPropString(node, "value"))) { + virReportError(VIR_ERR_XML_ERROR, + _("Option definition in IPv4 network '%s' " + "must have value attribute"), + networkName); + goto cleanup; + } + + ret = 0; + +cleanup: + VIR_FREE(number); + return ret; +} + + +static int virNetworkDHCPDefParseXML(const char *networkName, xmlNodePtr node, virNetworkIpDefPtr def) @@ -837,6 +876,17 @@ virNetworkDHCPDefParseXML(const char *networkName, def->bootfile = file; def->bootserver = inaddr; VIR_FREE(server); + } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "option")) { + if (VIR_REALLOC_N(def->options, def->noptions + 1) < 0) { + virReportOOMError(); + return -1; + } + if (virNetworkDHCPOptionDefParseXML(networkName, cur, + &def->options[def->noptions])) { + return -1; + } + def->noptions++; } cur = cur->next; @@ -2045,6 +2095,10 @@ virNetworkIpDefFormat(virBufferPtr buf, virBufferAddLit(buf, "/>\n"); } + for (ii = 0 ; ii < def->noptions ; ii++) { + virBufferAsprintf(buf, "<option number='%u' value='%s' />\n", + def->options[ii].number, def->options[ii].value); + } virBufferAdjustIndent(buf, -2); virBufferAddLit(buf, "</dhcp>\n"); diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 4c634ed..14f852a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -77,6 +77,13 @@ struct _virNetworkDHCPHostDef { virSocketAddr ip; }; +typedef struct _virNetworkDHCPOptionDef virNetworkDHCPOptionDef; +typedef virNetworkDHCPOptionDef *virNetworkDHCPOptionDefPtr; +struct _virNetworkDHCPOptionDef { + unsigned int number; + char *value; +}; + typedef struct _virNetworkDNSTxtDef virNetworkDNSTxtDef; typedef virNetworkDNSTxtDef *virNetworkDNSTxtDefPtr; struct _virNetworkDNSTxtDef { @@ -139,6 +146,9 @@ struct _virNetworkIpDef { char *tftproot; char *bootfile; virSocketAddr bootserver; + + size_t noptions; /* Zero or more additional dhcp options */ + virNetworkDHCPOptionDefPtr options; }; typedef struct _virNetworkForwardIfDef virNetworkForwardIfDef; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c834f83..c7c0a9e 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -926,6 +926,15 @@ networkDnsmasqConfContents(virNetworkObjPtr network, virBufferAsprintf(&configbuf, "dhcp-boot=%s\n", ipdef->bootfile); } } + + /* Any additional DHCP options? */ + if (ipdef->noptions > 0) { + for (r = 0 ; r < ipdef->noptions ; r++) { + virBufferAsprintf(&configbuf, "dhcp-option=%u,\"%s\"\n", + ipdef->options[r].number, + ipdef->options[r].value); + } + } } ipdef = (ipdef == ipv6def) ? NULL : ipv6def; } @@ -959,6 +968,7 @@ networkDnsmasqConfContents(virNetworkObjPtr network, virBufferAsprintf(&configbuf, "addn-hosts=%s\n", dctx->addnhostsfile->path); + /* Are we doing RA instead of radvd? */ if (DNSMASQ_RA_SUPPORT(caps)) { if (ipv6def) diff --git a/tests/networkxml2xmlin/netboot-network.xml b/tests/networkxml2xmlin/netboot-network.xml index ed75663..4de8976 100644 --- a/tests/networkxml2xmlin/netboot-network.xml +++ b/tests/networkxml2xmlin/netboot-network.xml @@ -9,6 +9,7 @@ <dhcp> <range start="192.168.122.2" end="192.168.122.254" /> <bootp file="pxeboot.img" /> + <option number="252" value="\n" /> </dhcp> </ip> </network> diff --git a/tests/networkxml2xmlin/netboot-proxy-network.xml b/tests/networkxml2xmlin/netboot-proxy-network.xml index ecb6738..4c5c480 100644 --- a/tests/networkxml2xmlin/netboot-proxy-network.xml +++ b/tests/networkxml2xmlin/netboot-proxy-network.xml @@ -8,6 +8,7 @@ <dhcp> <range start="192.168.122.2" end="192.168.122.254" /> <bootp file="pxeboot.img" server="10.20.30.40" /> + <option number="252" value="\n" /> </dhcp> </ip> </network> diff --git a/tests/networkxml2xmlout/netboot-network.xml b/tests/networkxml2xmlout/netboot-network.xml index b8a4d99..c3ea95a 100644 --- a/tests/networkxml2xmlout/netboot-network.xml +++ b/tests/networkxml2xmlout/netboot-network.xml @@ -9,6 +9,7 @@ <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <bootp file='pxeboot.img' /> + <option number='252' value='\n' /> </dhcp> </ip> </network> diff --git a/tests/networkxml2xmlout/netboot-proxy-network.xml b/tests/networkxml2xmlout/netboot-proxy-network.xml index e11c50b..f5f2c0d 100644 --- a/tests/networkxml2xmlout/netboot-proxy-network.xml +++ b/tests/networkxml2xmlout/netboot-proxy-network.xml @@ -8,6 +8,7 @@ <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <bootp file='pxeboot.img' server='10.20.30.40' /> + <option number='252' value='\n' /> </dhcp> </ip> </network> -- 1.7.10.4

4 6

[libvirt] <seclabel> inside a //disk/source element
by Richard W.M. Jones 27 Feb '13

27 Feb '13

According to the docs, it should be possible to do: <disk device="disk" type="file"> <source file="/path/to/some/file"> <seclabel relabel="no"/> <---- NB </source> <target dev="sda" bus="scsi"/> <driver name="qemu" type="qcow2"/> </disk> However I tried it, and it simply doesn't work. Furthermore I looked at the code in domain_conf.c, and I can't see how it's even supposed to work. It doesn't look to me as if <seclabel> is ever parsed in that context. Can anyone else confirm that this is a bug or point out my error? Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones virt-p2v converts physical machines to virtual machines. Boot with a live CD or over the network (PXE) and turn machines into KVM guests. http://libguestfs.org/virt-v2v

2 2

[libvirt] [PATCH] Fix autodestroy of QEMU guests
by Daniel P. Berrange 27 Feb '13

27 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> The virQEMUCloseCallbacksRunOne method was passing a uuid string to virDomainObjListFindByUUID, when it actually expected to get a raw uuid buffer. This was not caught by the compiler because the method was using a 'void *uuid' instead of first casting it to the expected type. This regression was accidentally caused by refactoring in commit 568a6cda277f04ab9baaeb97490e548b7b608aa6 Author: Jiri Denemark <jdenemar(a)redhat.com> Date: Fri Feb 15 15:11:47 2013 +0100 qemu: Avoid deadlock in autodestroy Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_conf.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 4f0cb18..1cd4b7c 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -805,22 +805,26 @@ struct virQEMUCloseCallbacksData { static void virQEMUCloseCallbacksRunOne(void *payload, - const void *uuid, + const void *key, void *opaque) { struct virQEMUCloseCallbacksData *data = opaque; qemuDriverCloseDefPtr closeDef = payload; virDomainObjPtr dom; + const char *uuidstr = key; + unsigned char uuid[VIR_UUID_BUFLEN]; + + if (virUUIDParse(uuidstr, uuid) < 0) + return; VIR_DEBUG("conn=%p, thisconn=%p, uuid=%s, cb=%p", - closeDef->conn, data->conn, (const char *) uuid, closeDef->cb); + closeDef->conn, data->conn, uuidstr, closeDef->cb); if (data->conn != closeDef->conn || !closeDef->cb) return; if (!(dom = virDomainObjListFindByUUID(data->driver->domains, uuid))) { - VIR_DEBUG("No domain object with UUID %s", - (const char *) uuid); + VIR_DEBUG("No domain object with UUID %s", uuidstr); return; } -- 1.7.11.7

2 1

[libvirt] [PATCH] Fix typo in internal VIR_QEMU_PROCESS_START_AUTODESROY constant
by Daniel P. Berrange 27 Feb '13

27 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> s/VIR_QEMU_PROCESS_START_AUTODESROY/VIR_QEMU_PROCESS_START_AUTODESTROY/ Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_driver.c | 4 ++-- src/qemu/qemu_migration.c | 2 +- src/qemu/qemu_process.c | 4 ++-- src/qemu/qemu_process.h | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 8dae8f9..0f6a431 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1460,7 +1460,7 @@ static virDomainPtr qemuDomainCreate(virConnectPtr conn, const char *xml, if (flags & VIR_DOMAIN_START_PAUSED) start_flags |= VIR_QEMU_PROCESS_START_PAUSED; if (flags & VIR_DOMAIN_START_AUTODESTROY) - start_flags |= VIR_QEMU_PROCESS_START_AUTODESROY; + start_flags |= VIR_QEMU_PROCESS_START_AUTODESTROY; if (!(caps = virQEMUDriverGetCapabilities(driver, false))) goto cleanup; @@ -5403,7 +5403,7 @@ qemuDomainObjStart(virConnectPtr conn, unsigned int start_flags = VIR_QEMU_PROCESS_START_COLD; start_flags |= start_paused ? VIR_QEMU_PROCESS_START_PAUSED : 0; - start_flags |= autodestroy ? VIR_QEMU_PROCESS_START_AUTODESROY : 0; + start_flags |= autodestroy ? VIR_QEMU_PROCESS_START_AUTODESTROY : 0; /* * If there is a managed saved state restore it instead of starting diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index cae58fa..a58a79d 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -2124,7 +2124,7 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, if (qemuProcessStart(dconn, driver, vm, migrateFrom, dataFD[0], NULL, NULL, VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START, VIR_QEMU_PROCESS_START_PAUSED | - VIR_QEMU_PROCESS_START_AUTODESROY) < 0) { + VIR_QEMU_PROCESS_START_AUTODESTROY) < 0) { virDomainAuditStart(vm, "migrated", false); /* Note that we don't set an error here because qemuProcessStart * should have already done that. diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index b9fdcd2..db95d6e 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3516,7 +3516,7 @@ int qemuProcessStart(virConnectPtr conn, * but doesn't hurt to check */ virCheckFlags(VIR_QEMU_PROCESS_START_COLD | VIR_QEMU_PROCESS_START_PAUSED | - VIR_QEMU_PROCESS_START_AUTODESROY, -1); + VIR_QEMU_PROCESS_START_AUTODESTROY, -1); cfg = virQEMUDriverGetConfig(driver); @@ -4043,7 +4043,7 @@ int qemuProcessStart(virConnectPtr conn, VIR_DOMAIN_PAUSED_USER); } - if (flags & VIR_QEMU_PROCESS_START_AUTODESROY && + if (flags & VIR_QEMU_PROCESS_START_AUTODESTROY && qemuProcessAutoDestroyAdd(driver, vm, conn) < 0) goto cleanup; diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h index bc4d54d..7d0aaa8 100644 --- a/src/qemu/qemu_process.h +++ b/src/qemu/qemu_process.h @@ -47,7 +47,7 @@ int qemuProcessAssignPCIAddresses(virDomainDefPtr def); typedef enum { VIR_QEMU_PROCESS_START_COLD = 1 << 0, VIR_QEMU_PROCESS_START_PAUSED = 1 << 1, - VIR_QEMU_PROCESS_START_AUTODESROY = 1 << 2, + VIR_QEMU_PROCESS_START_AUTODESTROY = 1 << 2, } qemuProcessStartFlags; int qemuProcessStart(virConnectPtr conn, -- 1.7.11.7

3 2

[libvirt] [PATCH] Avoid spamming logs with cgroups warnings
by Daniel P. Berrange 27 Feb '13

27 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> The code for putting the emulator threads in a separate cgroup would spam the logs with warnings 2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 3 2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 4 2013-02-27 16:08:26.732+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 6 This is because it has only created child cgroups for 3 of the controllers, but was trying to move the processes from all the controllers. The fix is to only try to move threads in the controllers we actually created. Also remove the warning and make it return a hard error to avoid such lazy callers in the future. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_cgroup.c | 5 +++++ src/util/vircgroup.c | 3 +-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_cgroup.c b/src/qemu/qemu_cgroup.c index e65b486..671d613 100644 --- a/src/qemu/qemu_cgroup.c +++ b/src/qemu/qemu_cgroup.c @@ -692,6 +692,11 @@ int qemuSetupCgroupForEmulator(virQEMUDriverPtr driver, } for (i = 0; i < VIR_CGROUP_CONTROLLER_LAST; i++) { + if (i != VIR_CGROUP_CONTROLLER_CPU && + i != VIR_CGROUP_CONTROLLER_CPUACCT && + i != VIR_CGROUP_CONTROLLER_CPUSET) + continue; + if (!qemuCgroupControllerActive(driver, i)) continue; rc = virCgroupMoveTask(cgroup, cgroup_emulator, i); diff --git a/src/util/vircgroup.c b/src/util/vircgroup.c index 48cba93..532e704 100644 --- a/src/util/vircgroup.c +++ b/src/util/vircgroup.c @@ -884,8 +884,7 @@ int virCgroupMoveTask(virCgroupPtr src_group, virCgroupPtr dest_group, if (!src_group->controllers[controller].mountPoint || !dest_group->controllers[controller].mountPoint) { - VIR_WARN("no vm cgroup in controller %d", controller); - return 0; + return -EINVAL; } rc = virCgroupGetValueStr(src_group, controller, "tasks", &content); -- 1.7.11.7

2 1

[libvirt] [PATCH] Don't try to add non-existant devices to ACL
by Daniel P. Berrange 27 Feb '13

27 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> The QEMU driver has a list of devices nodes that are whitelisted for all guests. The kernel has recently started returning an error if you try to whitelist a device which does not exist. This causes a warning in libvirt logs and an audit error for any missing devices. eg 2013-02-27 16:08:26.515+0000: 29625: warning : virDomainAuditCgroup:451 : success=no virt=kvm resrc=cgroup reason=allow vm="vm031714" uuid=9d8f1de0-44f4-a0b1-7d50-e41ee6cd897b cgroup="/sys/fs/cgroup/devices/libvirt/qemu/vm031714/" class=path path=/dev/kqemu rdev=? acl=rw Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_cgroup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/src/qemu/qemu_cgroup.c b/src/qemu/qemu_cgroup.c index 671d613..9d6e88b 100644 --- a/src/qemu/qemu_cgroup.c +++ b/src/qemu/qemu_cgroup.c @@ -265,6 +265,12 @@ int qemuSetupCgroup(virQEMUDriverPtr driver, } for (i = 0; deviceACL[i] != NULL ; i++) { + if (access(deviceACL[i], F_OK) < 0) { + VIR_DEBUG("Ignoring non-existant device %s", + deviceACL[i]); + continue; + } + rc = virCgroupAllowDevicePath(cgroup, deviceACL[i], VIR_CGROUP_DEVICE_RW); virDomainAuditCgroupPath(vm, cgroup, "allow", deviceACL[i], "rw", rc); -- 1.7.11.7

2 1

[libvirt] [PATCH] qemu: -numa doesn't (yet) support disjoint range
by Eric Blake 27 Feb '13

27 Feb '13

https://bugzilla.redhat.com/show_bug.cgi?id=896092 mentions that qemu 1.4 and earlier only accept a simple start-stop range for the cpu=... argument of -numa. Libvirt would attempt to use -numa cpu=1,3 for a disjoint range, which did not work as intended. Upstream qemu will be adding a new syntax for disjoint cpu ranges in 1.5; but the design for that syntax is still under discussion at the time of this patch. So for libvirt 1.0.3, it is safest to just reject attempts to build an invalid qemu command line; in the future, we can add a capability bit and translate to the final accepted design for selecting a disjoint cpu range in numa. * src/qemu/qemu_command.c (qemuBuildNumaArgStr): Reject disjoint ranges. --- Also in response to: https://www.redhat.com/archives/libvir-list/2013-February/msg01414.html src/qemu/qemu_command.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 1c9bfc9..4f426e5 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -4756,32 +4756,47 @@ qemuBuildNumaArgStr(const virDomainDefPtr def, virCommandPtr cmd) { int i; virBuffer buf = VIR_BUFFER_INITIALIZER; - char *cpumask; + char *cpumask = NULL; + int ret = -1; for (i = 0; i < def->cpu->ncells; i++) { + VIR_FREE(cpumask); virCommandAddArg(cmd, "-numa"); virBufferAsprintf(&buf, "node,nodeid=%d", def->cpu->cells[i].cellid); virBufferAddLit(&buf, ",cpus="); cpumask = virBitmapFormat(def->cpu->cells[i].cpumask); if (cpumask) { - virBufferAsprintf(&buf, "%s", cpumask); - VIR_FREE(cpumask); + /* Up through qemu 1.4, -numa does not accept a cpus + * argument any more complex than start-stop. + * + * XXX For qemu 1.5, the syntax has not yet been decided; + * but when it is, we need a capability bit and + * translation of our cpumask into the qemu syntax. */ + if (strchr(cpumask, ',')) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("disjoint NUMA cpu ranges are not supported " + "with this QEMU")); + goto cleanup; + } + virBufferAdd(&buf, cpumask, -1); } def->cpu->cells[i].mem = VIR_DIV_UP(def->cpu->cells[i].mem, 1024) * 1024; virBufferAsprintf(&buf, ",mem=%d", def->cpu->cells[i].mem / 1024); - if (virBufferError(&buf)) - goto error; + if (virBufferError(&buf)) { + virReportOOMError(); + goto cleanup; + } virCommandAddArgBuffer(cmd, &buf); } - return 0; + ret = 0; -error: +cleanup: + VIR_FREE(cpumask); virBufferFreeAndReset(&buf); - virReportOOMError(); - return -1; + return ret; } static int -- 1.8.1.2

2 2

[libvirt] [PATCH] util: Add docs for virXMLProp string
by Peter Krempa 27 Feb '13

27 Feb '13

To avoid confusion about usage of this function explicitly document that this function returns copy of the attribute string. --- src/util/virxml.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/src/util/virxml.c b/src/util/virxml.c index 74f8beb..aa55a33 100644 --- a/src/util/virxml.c +++ b/src/util/virxml.c @@ -468,6 +468,16 @@ virXPathLongLong(const char *xpath, return ret; } +/** + * virXMLPropString: + * @node: XML dom node pointer + * @name: Name of the property (attribute) to get + * + * Convenience function to return copy of an attribute value of a XML node. + * + * Returns the property (attribute) value as string or NULL in case of failure. + * The caller is responsible for freeing the returned buffer. + */ char * virXMLPropString(xmlNodePtr node, const char *name) -- 1.8.1.1

2 3

[libvirt] ANNOUNCE: Perl binding Sys-Virt release 1.0.2
by Daniel P. Berrange 27 Feb '13

27 Feb '13

I am pleased to announce that release 1.0.2 of Sys-Virt, the libvirt Perl API binding is now available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-1.0.2.tar.gz Changed in this release: - Add all new APIs and constants in libvirt 1.0.2 Further information, including online API documentation & previous release archives, is available from the CPAN home page http://search.cpan.org/dist/Sys-Virt/ Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt] Hard requirement on gcrypt.h?
by Eugene Marcotte 27 Feb '13

27 Feb '13

Hi, I'm building libvirt for the first time and figuring out what libraries are required to get the simplest possible thing working. Is there a hard requirement on gcrypt? I got libvirt past the configure script but the build failed on gcrypt.h. It looks like the include for it could be moved inside the #if WITH_GNUTLS section of libirt.c, if I understand what configure.ac is trying to set up. Thoughts? Thanks! Eugene

3 6

[libvirt] [PATCH] tests: fix leaks in storagevolxml2argvtest
by Ján Tomko 27 Feb '13

27 Feb '13

Reported by John Ferlan. --- tests/storagevolxml2argvtest.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/storagevolxml2argvtest.c b/tests/storagevolxml2argvtest.c index 416bb6f..77ba800 100644 --- a/tests/storagevolxml2argvtest.c +++ b/tests/storagevolxml2argvtest.c @@ -89,6 +89,10 @@ cleanup: virCommandFree(cmd); VIR_FREE(actualCmdline); VIR_FREE(expectedCmdline); + VIR_FREE(poolXmlData); + VIR_FREE(volXmlData); + VIR_FREE(inputvolXmlData); + virObjectUnref(conn); return ret; } -- 1.7.12.4

2 2

[libvirt] [PATCH] libvirt.c: Make VIR_MIGRATE_NON_SHARED_{INC, DISK} mutually exclusive
by Michal Privoznik 27 Feb '13

27 Feb '13

These two flags in fact are mutually exclusive. Requesting them both doesn't make any sense regardless of hypervisor driver. Hence, we have to make it within libvirt.c file instead of fixing it in each driver. --- src/libvirt.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/src/libvirt.c b/src/libvirt.c index 934997a..63416aa 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -5161,6 +5161,10 @@ virDomainMigrateDirect(virDomainPtr domain, * XML includes details of the support URI schemes. If omitted * the dconn will be asked for a default URI. * + * If you want to copy non-shared storage within migration you + * can use either VIR_MIGRATE_NON_SHARED_DISK or + * VIR_MIGRATE_NON_SHARED_INC as they are mutually exclusive. + * * In either case it is typically only necessary to specify a * URI if the destination host has multiple interfaces and a * specific interface is required to transmit migration data. @@ -5221,6 +5225,15 @@ virDomainMigrate(virDomainPtr domain, goto error; } + if (flags & VIR_MIGRATE_NON_SHARED_DISK && + flags & VIR_MIGRATE_NON_SHARED_INC) { + virReportInvalidArg(flags, + _("flags 'shared disk' and 'shared incremental' " + "in %s are mutually exclusive"), + __FUNCTION__); + goto error; + } + if (flags & VIR_MIGRATE_OFFLINE) { if (!VIR_DRV_SUPPORTS_FEATURE(domain->conn->driver, domain->conn, VIR_DRV_FEATURE_MIGRATION_OFFLINE)) { @@ -5375,6 +5388,10 @@ error: * XML includes details of the support URI schemes. If omitted * the dconn will be asked for a default URI. * + * If you want to copy non-shared storage within migration you + * can use either VIR_MIGRATE_NON_SHARED_DISK or + * VIR_MIGRATE_NON_SHARED_INC as they are mutually exclusive. + * * In either case it is typically only necessary to specify a * URI if the destination host has multiple interfaces and a * specific interface is required to transmit migration data. @@ -5448,6 +5465,15 @@ virDomainMigrate2(virDomainPtr domain, goto error; } + if (flags & VIR_MIGRATE_NON_SHARED_DISK && + flags & VIR_MIGRATE_NON_SHARED_INC) { + virReportInvalidArg(flags, + _("flags 'shared disk' and 'shared incremental' " + "in %s are mutually exclusive"), + __FUNCTION__); + goto error; + } + if (flags & VIR_MIGRATE_OFFLINE) { if (!VIR_DRV_SUPPORTS_FEATURE(domain->conn->driver, domain->conn, VIR_DRV_FEATURE_MIGRATION_OFFLINE)) { @@ -5601,6 +5627,10 @@ error: * * VIR_MIGRATE_TUNNELLED requires that VIR_MIGRATE_PEER2PEER be set. * + * If you want to copy non-shared storage within migration you + * can use either VIR_MIGRATE_NON_SHARED_DISK or + * VIR_MIGRATE_NON_SHARED_INC as they are mutually exclusive. + * * If a hypervisor supports renaming domains during migration, * the dname parameter specifies the new name for the domain. * Setting dname to NULL keeps the domain name the same. If domain @@ -5648,6 +5678,15 @@ virDomainMigrateToURI(virDomainPtr domain, virCheckNonNullArgGoto(duri, error); + if (flags & VIR_MIGRATE_NON_SHARED_DISK && + flags & VIR_MIGRATE_NON_SHARED_INC) { + virReportInvalidArg(flags, + _("flags 'shared disk' and 'shared incremental' " + "in %s are mutually exclusive"), + __FUNCTION__); + goto error; + } + if (flags & VIR_MIGRATE_OFFLINE && !VIR_DRV_SUPPORTS_FEATURE(domain->conn->driver, domain->conn, VIR_DRV_FEATURE_MIGRATION_OFFLINE)) { @@ -5741,6 +5780,10 @@ error: * * VIR_MIGRATE_TUNNELLED requires that VIR_MIGRATE_PEER2PEER be set. * + * If you want to copy non-shared storage within migration you + * can use either VIR_MIGRATE_NON_SHARED_DISK or + * VIR_MIGRATE_NON_SHARED_INC as they are mutually exclusive. + * * If a hypervisor supports changing the configuration of the guest * during migration, the @dxml parameter specifies the new config * for the guest. The configuration must include an identical set @@ -5799,6 +5842,15 @@ virDomainMigrateToURI2(virDomainPtr domain, goto error; } + if (flags & VIR_MIGRATE_NON_SHARED_DISK && + flags & VIR_MIGRATE_NON_SHARED_INC) { + virReportInvalidArg(flags, + _("flags 'shared disk' and 'shared incremental' " + "in %s are mutually exclusive"), + __FUNCTION__); + goto error; + } + if (flags & VIR_MIGRATE_PEER2PEER) { if (VIR_DRV_SUPPORTS_FEATURE(domain->conn->driver, domain->conn, VIR_DRV_FEATURE_MIGRATION_P2P)) { -- 1.8.1.4

2 2

[libvirt] [PATCH] add dtb support
by Olivia Yin 27 Feb '13

27 Feb '13

Signed-off-by: Olivia Yin <hong-hua.yin(a)freescale.com> --- src/conf/domain_conf.c | 4 ++++ src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 6 ++++++ 3 files changed, 11 insertions(+), 0 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 0c75838..07ad6b9 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -1771,6 +1771,7 @@ void virDomainDefFree(virDomainDefPtr def) VIR_FREE(def->os.kernel); VIR_FREE(def->os.initrd); VIR_FREE(def->os.cmdline); + VIR_FREE(def->os.dtb); VIR_FREE(def->os.root); VIR_FREE(def->os.loader); VIR_FREE(def->os.bootloader); @@ -9993,6 +9994,7 @@ virDomainDefParseXML(virCapsPtr caps, def->os.kernel = virXPathString("string(./os/kernel[1])", ctxt); def->os.initrd = virXPathString("string(./os/initrd[1])", ctxt); def->os.cmdline = virXPathString("string(./os/cmdline[1])", ctxt); + def->os.dtb = virXPathString("string(./os/dtb[1])", ctxt); def->os.root = virXPathString("string(./os/root[1])", ctxt); def->os.loader = virXPathString("string(./os/loader[1])", ctxt); } @@ -14506,6 +14508,8 @@ virDomainDefFormatInternal(virDomainDefPtr def, def->os.initrd); virBufferEscapeString(buf, " <cmdline>%s</cmdline>\n", def->os.cmdline); + virBufferEscapeString(buf, " <dtb>%s</dtb>\n", + def->os.dtb); virBufferEscapeString(buf, " <root>%s</root>\n", def->os.root); diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 4ffa4aa..892640f 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -1545,6 +1545,7 @@ struct _virDomainOSDef { char *kernel; char *initrd; char *cmdline; + char *dtb; char *root; char *loader; char *bootloader; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index dee493f..0c68778 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -5628,6 +5628,8 @@ qemuBuildCommandLine(virConnectPtr conn, virCommandAddArgList(cmd, "-initrd", def->os.initrd, NULL); if (def->os.cmdline) virCommandAddArgList(cmd, "-append", def->os.cmdline, NULL); + if (def->os.dtb) + virCommandAddArgList(cmd, "-dtb", def->os.dtb, NULL); } else { virCommandAddArgList(cmd, "-bootloader", def->os.bootloader, NULL); } @@ -8794,6 +8796,10 @@ virDomainDefPtr qemuParseCommandLine(virCapsPtr qemuCaps, WANT_VALUE(); if (!(def->os.cmdline = strdup(val))) goto no_memory; + } else if (STREQ(arg, "-dtb")) { + WANT_VALUE(); + if (!(def->os.dtb = strdup(val))) + goto no_memory; } else if (STREQ(arg, "-boot")) { const char *token = NULL; WANT_VALUE(); -- 1.6.4

3 2

[libvirt] [PATCH 0/4] doc: storage.html updates
by Philipp Hahn 27 Feb '13

27 Feb '13

Hello, some documentation updates for new storage pools and volumes. Philipp Hahn (4): doc: document new storage volume/pool types doc: add storage format entries doc: fix writing of QEMU doc: white space changes docs/storage.html.in | 40 +++++++++++++++++++++++++++++++++------- 1 file changed, 33 insertions(+), 7 deletions(-) -- 1.7.10.4

2 8

[libvirt] [PATCH v2 0/2] QEMU: add -dtb option support
by Olivia Yin 27 Feb '13

27 Feb '13

Sometime qemu need load specific device tree binary image. These patches provides -dtb option support and update docs/tests. Olivia Yin (2): QEMU: add -dtb option support update documents and test cases for -dtb support src/conf/domain_conf.c | 4 ++++ src/conf/domain_conf.h | 1 + src/qemu/qemu_capabilities.c | 3 +++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 6 ++++++ docs/formatdomain.html.in | 5 ++++ docs/schemas/domaincommon.rng | 5 ++++ tests/qemuxml2argvdata/qemuxml2argv-ppc-dtb.args | 1 + tests/qemuxml2argvdata/qemuxml2argv-ppc-dtb.xml | 28 ++++++++++++++++++++++

1 2

[libvirt] Problem about CPU index
by Li Zhang 27 Feb '13

27 Feb '13

Hi all, In this function qemuMonitorJSONExtractCPUInfo(), It assumes that cpu index is always contiguous. if (cpu != i) { virReportError(VIR_ERR_INTERNAL_ERROR, _("unexpected cpu index %d expecting %d"), i, cpu); goto cleanup; } For x86, in what kind of situation does this error happen? This assumption causes the problem for ppc64. For ppc64, it's quite different from x86. SMT is needed to be disabled because of hardware's limitation. So, only one thread per core is online. These threads are not contiguous. For example, smt=4, 64 CPUs and 16 Cores CPU information is as the following: Architecture: ppc64 Byte Order: Big Endian CPU(s): 64 On-line CPU(s) list: 0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60 Off-line CPU(s) list: 1-3,5-7,9-11,13-15,17-19,21-23,25-27,29-31,33-35,37-39,41-43,45-47,49-51,53-55,57-59,61-63 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 16 NUMA node(s): 2 All CPUs we get are only 0,4, ..., 60. If possible, can this assumption be removed? Thanks. -- Li Zhang IBM China Linux Technology Centre

3 2

[libvirt] How to trigger autoheader after configure.ac changes?
by TJ 27 Feb '13

27 Feb '13

I'm currently adding support for running a DHCP relay daemon instead of using dnsmasq for DHCP. Everything is looking good but I've stumbled on one issue. I've added a new variable to 'configure.a' (DHCPRELAY) but found that 'autogen.sh' doesn't call 'autoheader' to remake 'config.h.in' so it contains the definition of DHCPRELAY for the compiler. Reading 'autogen.sh' and 'bootstrap' I can see convoluted functionality but can't figure out what the recommended best practice would be in terms of generating the new 'config.h.in'. If I call 'autoheader' manually the definition is added correctly. Should I just do that and then add the changed 'config.h.in' to the commit that introduces the new definition?

1 1

[libvirt] [PATCH] schema: Restrict mode to ocal
by Philipp Hahn 27 Feb '13

27 Feb '13

virStrToLong(..., 8, ...) already requires the mode to be octal. Change the relax-ng schema to check for octal as well. Signed-off-by: Philipp Hahn <hahn(a)univention.de> --- docs/schemas/basictypes.rng | 6 ++++++ docs/schemas/storagepool.rng | 2 +- docs/schemas/storagevol.rng | 2 +- 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/docs/schemas/basictypes.rng b/docs/schemas/basictypes.rng index ec1d940..e6cf907 100644 --- a/docs/schemas/basictypes.rng +++ b/docs/schemas/basictypes.rng @@ -20,6 +20,12 @@ </data> </define> + <define name='octalMode'> + <data type="unsignedInt"> + <param name='pattern'>[0-7]+</param> + </data> + </define> + <define name="uint8range"> <choice> <data type="string"> diff --git a/docs/schemas/storagepool.rng b/docs/schemas/storagepool.rng index 165e276..2b1f08d 100644 --- a/docs/schemas/storagepool.rng +++ b/docs/schemas/storagepool.rng @@ -175,7 +175,7 @@ <optional> <element name='permissions'> <element name='mode'> - <ref name='unsignedInt'/> + <ref name='octalMode'/> </element> <element name='owner'> <choice> diff --git a/docs/schemas/storagevol.rng b/docs/schemas/storagevol.rng index 10b7847..d4a29c7 100644 --- a/docs/schemas/storagevol.rng +++ b/docs/schemas/storagevol.rng @@ -46,7 +46,7 @@ <optional> <element name='permissions'> <element name='mode'> - <ref name='unsignedInt'/> + <ref name='octalMode'/> </element> <element name='owner'> <ref name='unsignedInt'/> -- 1.7.10.4

2 1

[libvirt] [PATCH] tests: skip virstoragetest on RHEL 5
by Eric Blake 26 Feb '13

26 Feb '13

virstoragetest was failing on RHEL 5, but with no good error message: TEST: virstoragetest 0 FAIL It turns out that qemu-img was so old, that it lacked support for -o backing_file. It didn't help that the test was also using qemu-img from PATH, even after first probing for kvm-img. * tests/virstoragetest.c (testPrepImages): Consistently use discovered binary. Skip instead of fail if qemu-img fails during setup. --- Pushing under the build-breaker rule; this gets RHEL 5 from 5 test failures down to 4. tests/virstoragetest.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/tests/virstoragetest.c b/tests/virstoragetest.c index 6ca7b9a..d495e6a 100644 --- a/tests/virstoragetest.c +++ b/tests/virstoragetest.c @@ -89,10 +89,8 @@ testPrepImages(void) qemuimg = virFindFileInPath("kvm-img"); if (!qemuimg) qemuimg = virFindFileInPath("qemu-img"); - if (!qemuimg) { - fputs("qemu-img missing or too old; skipping this test\n", stderr); - return EXIT_AM_SKIP; - } + if (!qemuimg) + goto skip; if (virAsprintf(&absraw, "%s/raw", datadir) < 0 || virAsprintf(&absqcow2, "%s/qcow2", datadir) < 0 || @@ -116,8 +114,10 @@ testPrepImages(void) /* I'm lazy enough to use a shell one-liner instead of open/write/close */ virCommandFree(cmd); cmd = virCommandNewArgList("sh", "-c", "printf %1024d 0 > raw", NULL); - if (virCommandRun(cmd, NULL) < 0) + if (virCommandRun(cmd, NULL) < 0) { + fprintf(stderr, "unable to create raw file\n"); goto cleanup; + } if (!(canonraw = canonicalize_file_name(absraw))) { virReportOOMError(); goto cleanup; @@ -126,20 +126,17 @@ testPrepImages(void) /* Create a qcow2 wrapping relative raw; later on, we modify its * metadata to test other configurations */ virCommandFree(cmd); - cmd = virCommandNewArgList("qemu-img", "create", "-f", "qcow2", + cmd = virCommandNewArgList(qemuimg, "create", "-f", "qcow2", "-obacking_file=raw,backing_fmt=raw", "qcow2", NULL); if (virCommandRun(cmd, NULL) < 0) - goto cleanup; + goto skip; /* Make sure our later uses of 'qemu-img rebase' will work */ virCommandFree(cmd); - cmd = virCommandNewArgList("qemu-img", "rebase", "-u", "-f", "qcow2", + cmd = virCommandNewArgList(qemuimg, "rebase", "-u", "-f", "qcow2", "-F", "raw", "-b", "raw", "qcow2", NULL); - if (virCommandRun(cmd, NULL) < 0) { - fputs("qemu-img is too old; skipping this test\n", stderr); - ret = EXIT_AM_SKIP; - goto cleanup; - } + if (virCommandRun(cmd, NULL) < 0) + goto skip; if (!(canonqcow2 = canonicalize_file_name(absqcow2))) { virReportOOMError(); goto cleanup; @@ -148,21 +145,21 @@ testPrepImages(void) /* Create a second qcow2 wrapping the first, to be sure that we * can correctly avoid insecure probing. */ virCommandFree(cmd); - cmd = virCommandNewArgList("qemu-img", "create", "-f", "qcow2", NULL); + cmd = virCommandNewArgList(qemuimg, "create", "-f", "qcow2", NULL); virCommandAddArgFormat(cmd, "-obacking_file=%s,backing_fmt=qcow2", absqcow2); virCommandAddArg(cmd, "wrap"); if (virCommandRun(cmd, NULL) < 0) - goto cleanup; + goto skip; /* Create a qed file. */ virCommandFree(cmd); - cmd = virCommandNewArgList("qemu-img", "create", "-f", "qed", NULL); + cmd = virCommandNewArgList(qemuimg, "create", "-f", "qed", NULL); virCommandAddArgFormat(cmd, "-obacking_file=%s,backing_fmt=raw", absraw); virCommandAddArg(cmd, "qed"); if (virCommandRun(cmd, NULL) < 0) - goto cleanup; + goto skip; /* Create some symlinks in a sub-directory. */ if (symlink("../qcow2", datadir "/sub/link1") < 0 || @@ -177,6 +174,11 @@ cleanup: if (ret) testCleanupImages(); return ret; + +skip: + fputs("qemu-img is too old; skipping this test\n", stderr); + ret = EXIT_AM_SKIP; + goto cleanup; } typedef struct _testFileData testFileData; -- 1.8.1.2

1 0

[libvirt] [PATCH] interface: udev backend coverity NULL deref
by Doug Goldstein 26 Feb '13

26 Feb '13

This fixes a potential NULL deref identified by John Ferlan <jferlan(a)redhat.com> if scandir() didn't return an expected value. --- src/interface/interface_backend_udev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/src/interface/interface_backend_udev.c b/src/interface/interface_backend_udev.c index dca85b3..1034429 100644 --- a/src/interface/interface_backend_udev.c +++ b/src/interface/interface_backend_udev.c @@ -779,6 +779,13 @@ udevIfaceGetIfaceDefBond(struct udev *udev, * so we use the part after the _ */ tmp_str = strchr(slave_list[i]->d_name, '_'); + if (!tmp_str || strlen(tmp_str) < 2) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Invalid enslaved interface name '%s' seen for " + "bond '%s'", slave_list[i]->d_name, name)); + goto cleanup; + } + /* go past the _ */ tmp_str++; ifacedef->data.bond.itf[i] = -- 1.7.12.4

3 2

[libvirt] [PATCH] Remove some C99 variable decls in parallels driver
by Daniel P. Berrange 26 Feb '13

26 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> The parallels storage driver declared some loop variables inside the for(;;). This is not allowed by libvirt coding standards Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> Pushed under build breaker rule - RHEL-5 gcc chokes on them --- src/parallels/parallels_storage.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/src/parallels/parallels_storage.c b/src/parallels/parallels_storage.c index f696fcb..ac65a1d 100644 --- a/src/parallels/parallels_storage.c +++ b/src/parallels/parallels_storage.c @@ -129,9 +129,11 @@ static char *parallelsMakePoolName(virConnectPtr conn, const char *path) { parallelsConnPtr privconn = conn->privateData; char *name; + unsigned int i; - for (unsigned int i = 0; i < UINT_MAX; i++) { + for (i = 0; i < UINT_MAX; i++) { bool found = false; + int j; if (!(name = strdup(path))) { virReportOOMError(); @@ -148,11 +150,11 @@ static char *parallelsMakePoolName(virConnectPtr conn, const char *path) return 0; } - for (int j = 0; j < strlen(name); j++) + for (j = 0; j < strlen(name); j++) if (name[j] == '/') name[j] = '-'; - for (int j = 0; j < privconn->pools.count; j++) { + for (j = 0; j < privconn->pools.count; j++) { if (STREQ(name, privconn->pools.objs[j]->def->name)) { found = true; break; @@ -226,6 +228,7 @@ parallelsPoolAddByDomain(virConnectPtr conn, virDomainObjPtr dom) virStoragePoolObjListPtr pools = &privconn->pools; char *poolPath; virStoragePoolObjPtr pool = NULL; + int j; if (!(poolPath = strdup(pdom->home))) { virReportOOMError(); @@ -234,7 +237,7 @@ parallelsPoolAddByDomain(virConnectPtr conn, virDomainObjPtr dom) poolPath = dirname(poolPath); - for (int j = 0; j < pools->count; j++) { + for (j = 0; j < pools->count; j++) { if (STREQ(poolPath, pools->objs[j]->def->target.path)) { pool = pools->objs[j]; break; -- 1.8.1.2

1 0

[libvirt] ANNOUNCE: Perl binding Sys-Virt release 1.0.1
by Daniel P. Berrange 26 Feb '13

26 Feb '13

I am pleased to announce that release 1.0.1 of Sys-Virt, the libvirt Perl API binding is now available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-1.0.1.tar.gz Changed in this release: - Add all new APIs and constants in libvirt 1.0.1 - Fix typo preventing listing of NWFilters - Add more testing of object list APIs - Fix some incorrect error handling tests in binding - Remove bogus compare < 0 for size_t variables - Fix const-ness of functions for populating constants - Add option to turn on more GCC warning flags - Fix typos in POD docs Further information, including online API documentation & previous release archives, is available from the CPAN home page http://search.cpan.org/dist/Sys-Virt/ Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt] [PATCH 0/2] fix some RHEL 5 test failures
by Eric Blake 26 Feb '13

26 Feb '13

A couple of patches that I noticed while testing the release candidate on a RHEL 5 VM. Eric Blake (2): tests: consistent skip messages tests: old automake lacks abs_builddir tests/Makefile.am | 25 ++----------------------- tests/qemumonitorjsontest.c | 2 +- tests/virstoragetest.c | 4 ++-- 3 files changed, 5 insertions(+), 26 deletions(-) -- 1.8.1.2

2 3

[libvirt] [PATCH 0/4] Virtio-RNG followup
by Peter Krempa 26 Feb '13

26 Feb '13

This series adds rate limiting and multiple device support and fixes docs and adds test for XML entities and multiple RNG devices. Peter Krempa (4): virtio-rng: allow multiple RNG devices docs: Fix attribute name for virtio-rng backend virtio-rng: Add rate limiting options for virtio-RNG tests: Test multiple RNG devices and support for XML entities in paths docs/formatdomain.html.in | 14 +++- docs/schemas/domaincommon.rng | 18 ++++- src/conf/domain_conf.c | 78 +++++++++++++--------- src/conf/domain_conf.h | 6 +- src/qemu/qemu_command.c | 28 +++++--- .../qemuxml2argv-virtio-rng-random.args | 2 +- .../qemuxml2argv-virtio-rng-random.xml | 4 ++ 7 files changed, 106 insertions(+), 44 deletions(-) -- 1.8.1.1

2 8

[libvirt] [PATCH] vl.c: Support multiple CPU ranges on -numa option
by Eduardo Habkost 26 Feb '13

26 Feb '13

This allows "," to be used a separator between each CPU range. Note that commas inside key=value command-line options have to be escaped using ",,", so the command-line will look like: -numa node,cpus=A,,B,,C,,D Note that the following format, currently used by libvirt: -numa nodes,cpus=A,B,C,D will _not_ work yet, as "," is the option separator for the command-line option parser, and it will require changing the -numa option parsing code to handle "cpus" as a special case. Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com> --- vl.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/vl.c b/vl.c index 955d2ff..cd247be 100644 --- a/vl.c +++ b/vl.c @@ -1244,7 +1244,7 @@ char *get_boot_devices_list(size_t *size) return list; } -static void numa_node_parse_cpus(int nodenr, const char *cpus) +static void numa_node_parse_cpu_range(int nodenr, const char *cpus) { char *endptr; unsigned long long value, endvalue; @@ -1288,6 +1288,18 @@ error: exit(1); } +static void numa_node_parse_cpus(int nodenr, const char *option) +{ + char **parts; + int i; + + parts = g_strsplit(option, ",", 0); + for (i = 0; parts[i]; i++) { + numa_node_parse_cpu_range(nodenr, parts[i]); + } + g_strfreev(parts); +} + static void numa_add(const char *optarg) { char option[128]; -- 1.8.1

6 12

[libvirt] [PATCH] qemu: fix graphics port allocation
by Ján Tomko 26 Feb '13

26 Feb '13

Right now, we allocate a port or a TLS port for SPICE if it's set to -1, even if autoport is off. But we only free them if autoport is on. With autoport on, we only allocate TLS port if cfg->spiceTLS is set, but we free it even if it's not, leading to an error message. This patch separates the autoport=yes|no XML option into autoport and tlsAutoport in virDomainGraphicsDef: if autoport is yes, we set them both to 1 (and vice versa) if either of the port numbers is -1, the corresponding autoport is set to 1 and it's used as a condition for acquiring/releasing the port. For TLS ports, cfg->spiceTLS is checked before releasing the port as well. Also check the port number before trying to release it - the vnc port will be 0, the spice port will be -1 or 0 if it hasn't been allocated yet (if qemuProcessStart fails before port allocation). --- src/conf/domain_conf.c | 17 +++++++++++------ src/conf/domain_conf.h | 1 + src/qemu/qemu_hotplug.c | 3 ++- src/qemu/qemu_process.c | 26 ++++++++++++++------------ 4 files changed, 28 insertions(+), 19 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index b65e52a..cb27f82 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -7083,8 +7083,10 @@ virDomainGraphicsDefParseXML(xmlNodePtr node, } if ((autoport = virXMLPropString(node, "autoport")) != NULL) { - if (STREQ(autoport, "yes")) + if (STREQ(autoport, "yes")) { def->data.spice.autoport = 1; + def->data.spice.tlsAutoport = 1; + } VIR_FREE(autoport); } @@ -7102,12 +7104,14 @@ virDomainGraphicsDefParseXML(xmlNodePtr node, VIR_FREE(defaultMode); } - if (def->data.spice.port == -1 && def->data.spice.tlsPort == -1) { - /* Legacy compat syntax, used -1 for auto-port */ + /* Legacy compat syntax, used -1 for auto-port */ + if (def->data.spice.port == -1) def->data.spice.autoport = 1; - } + if (def->data.spice.tlsPort == -1) + def->data.spice.tlsAutoport = 1; - if (def->data.spice.autoport && (flags & VIR_DOMAIN_XML_INACTIVE)) { + if (def->data.spice.autoport && def->data.spice.tlsAutoport && + (flags & VIR_DOMAIN_XML_INACTIVE)) { def->data.spice.port = 0; def->data.spice.tlsPort = 0; } @@ -14201,7 +14205,8 @@ virDomainGraphicsDefFormat(virBufferPtr buf, def->data.spice.tlsPort); virBufferAsprintf(buf, " autoport='%s'", - def->data.spice.autoport ? "yes" : "no"); + (def->data.spice.autoport && + def->data.spice.tlsAutoport) ? "yes" : "no"); if (listenAddr) virBufferAsprintf(buf, " listen='%s'", listenAddr); diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 0828954..cc67716 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -1356,6 +1356,7 @@ struct _virDomainGraphicsDef { char *keymap; virDomainGraphicsAuthDef auth; unsigned int autoport :1; + unsigned int tlsAutoport :1; int channels[VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_LAST]; int defaultMode; /* enum virDomainGraphicsSpiceChannelMode */ int image; diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 78961a7..d8f9007 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1879,9 +1879,10 @@ qemuDomainChangeGraphics(virQEMUDriverPtr driver, case VIR_DOMAIN_GRAPHICS_TYPE_SPICE: if ((olddev->data.spice.autoport != dev->data.spice.autoport) || + (olddev->data.spice.tlsAutoport != dev->data.spice.tlsAutoport) || (!dev->data.spice.autoport && (olddev->data.spice.port != dev->data.spice.port)) || - (!dev->data.spice.autoport && + (!dev->data.spice.tlsAutoport && (olddev->data.spice.tlsPort != dev->data.spice.tlsPort))) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("cannot change port settings on spice graphics")); diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 732964f..7c2a54e 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3622,8 +3622,7 @@ int qemuProcessStart(virConnectPtr conn, graphics->data.vnc.port = port; } else if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) { unsigned short port = 0; - if (graphics->data.spice.autoport || - graphics->data.spice.port == -1) { + if (graphics->data.spice.autoport) { if (virPortAllocatorAcquire(driver->remotePorts, &port) < 0) goto cleanup; @@ -3635,9 +3634,7 @@ int qemuProcessStart(virConnectPtr conn, graphics->data.spice.port = port; } - if (cfg->spiceTLS && - (graphics->data.spice.autoport || - graphics->data.spice.tlsPort == -1)) { + if (cfg->spiceTLS && graphics->data.spice.tlsAutoport) { unsigned short tlsPort; if (virPortAllocatorAcquire(driver->remotePorts, &tlsPort) < 0) goto cleanup; @@ -4318,16 +4315,21 @@ retry: for (i = 0 ; i < vm->def->ngraphics; ++i) { virDomainGraphicsDefPtr graphics = vm->def->graphics[i]; if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC && - graphics->data.vnc.autoport) { + graphics->data.vnc.autoport && graphics->data.vnc.port) { ignore_value(virPortAllocatorRelease(driver->remotePorts, graphics->data.vnc.port)); } - if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE && - graphics->data.spice.autoport) { - ignore_value(virPortAllocatorRelease(driver->remotePorts, - graphics->data.spice.port)); - ignore_value(virPortAllocatorRelease(driver->remotePorts, - graphics->data.spice.tlsPort)); + if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) { + if (graphics->data.spice.autoport && + graphics->data.spice.port > 0) { + ignore_value(virPortAllocatorRelease(driver->remotePorts, + graphics->data.spice.port)); + } + if (cfg->spiceTLS && graphics->data.spice.tlsAutoport && + graphics->data.spice.tlsPort > 0) { + ignore_value(virPortAllocatorRelease(driver->remotePorts, + graphics->data.spice.tlsPort)); + } } } -- 1.7.12.4

2 1

[libvirt] [PATCH] libvirt: fix error message when connection can't be opened
by Ján Tomko 26 Feb '13

26 Feb '13

VIR_ERR_NO_CONNECT already contains "no connection driver available". This patch changes: no connection driver available for No connection for URI hello to: no connection driver available for hello Bug: https://bugzilla.redhat.com/show_bug.cgi?id=851413 --- src/libvirt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/libvirt.c b/src/libvirt.c index 934997a..8a28e4a 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -1216,7 +1216,7 @@ do_open(const char *name, if (!ret->driver) { /* If we reach here, then all drivers declined the connection. */ virLibConnError(VIR_ERR_NO_CONNECT, - _("No connection for URI %s"), + "%s", NULLSTR(name)); goto failed; } -- 1.7.12.4

2 2

[libvirt] [PATCH 0/4] uid_t|gid_t fixes for 32 bit Linux
by Philipp Hahn 26 Feb '13

26 Feb '13

Hello, on 2012-11-23 I already reported a problem with running libvirt on 32 Bit Linuxes (libvirt 0.9.12 on Debian Squeeze in my case) on this ML: [BUG] storage.xml: owner|group=-1 → 2^32-1 on 32 Bit Due to multiple castings the initial -1 gets casted to (unsigned int)4294967295, which failes to be cased to an (signed int) on read-back. Thus the default storage pool is not launched: 2013-02-22 16:50:10.182+0000: 28550: info : libvirt version: 0.9.12 2013-02-22 16:50:10.182+0000: 28550: error : virStorageDefParsePerms:635 : XML error: malformed owner element This is caused by uid_t and gid_t being opaque types: their exact type ranges from s32 to u32 to u64. (Solaris until 2007, Linux, Windows64) The following patch series fixes several issues, which I found while investigating the storage pool startup problem: - mismatch between printf format and types - implicit casts of -1 to uid_t and gid_t - missing casts of uid_t and gid_t for printing - virXPathLong() failing on +(2^32-1) @Guido: for Debian only the 4th patch is relevant, which applies with some re-indention. Additional issues: - UID and GID 4294967295 happens to be the same as -1, so hopefully nobody uses it. Should this be documented somewhere? - Some regression test? Philipp Hahn (4): util: Fix printf format for uid_t|gid_t storage: Cast uid_t|gid_t to unsigned int storage: cast -1 for uid_t|gid_t storage: fix uid_t|gid_t handling on 32 bit Linux src/conf/storage_conf.c | 82 ++++++++++++++++++++++++++++++++--------- src/storage/storage_backend.c | 22 ++++++----- src/util/virutil.c | 10 ++--- 3 files changed, 81 insertions(+), 33 deletions(-) -- 1.7.10.4

4 11

[libvirt] [PATCH] qemu: do not set unpriv_sgio if neither supported nor requested
by Paolo Bonzini 26 Feb '13

26 Feb '13

Currently we call virSetDeviceUnprivSGIO with val == 0 if a block device has an sgio attribute. But for sgio='filtered', we know that a kernel with no unpriv_sgio support will always behave as the user wanted. In this case, there is no need to call the function and report a (bogus) error. Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> --- src/qemu/qemu_process.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index b560d2e..4c152b2 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3455,36 +3455,35 @@ qemuProcessReconnectAll(virConnectPtr conn, virQEMUDriverPtr driver) int qemuSetUnprivSGIO(virDomainDiskDefPtr disk) { + char *sysfs_path = NULL; int val = -1; + int ret = 0; /* "sgio" is only valid for block disk; cdrom * and floopy disk can have empty source. */ if (disk->type != VIR_DOMAIN_DISK_TYPE_BLOCK || + disk->device != VIR_DOMAIN_DISK_DEVICE_LUN || !disk->src) return 0; - if (disk->sgio) - val = (disk->sgio == VIR_DOMAIN_DISK_SGIO_UNFILTERED); - - /* Ignore the setting if unpriv_sgio is not supported by the - * kernel, otherwise defaults to filter the SG_IO commands, - * I.E. Set unpriv_sgio to 0. - */ - if (disk->sgio == VIR_DOMAIN_DISK_SGIO_DEFAULT && - disk->device == VIR_DOMAIN_DISK_DEVICE_LUN) { - char *sysfs_path = NULL; + sysfs_path = virGetUnprivSGIOSysfsPath(disk->src, NULL); + if (sysfs_path == NULL) + return -1; - if ((sysfs_path = virGetUnprivSGIOSysfsPath(disk->src, NULL)) && - virFileExists(sysfs_path)) - val = 0; - VIR_FREE(sysfs_path); - } + /* By default, filter the SG_IO commands, i.e. set unpriv_sgio to 0. */ + val = (disk->sgio == VIR_DOMAIN_DISK_SGIO_UNFILTERED); - if (val >= 0 && virSetDeviceUnprivSGIO(disk->src, NULL, val) < 0) - return -1; + /* Do not do anything if unpriv_sgio is not supported by the kernel and the + * whitelist is enabled. But if requesting unfiltered access, always call + * virSetDeviceUnprivSGIO, to report an error for unsupported unpriv_sgio. + */ + if ((virFileExists(sysfs_path) || val == 1) && + virSetDeviceUnprivSGIO(disk->src, NULL, val) < 0) + ret = -1; - return 0; + VIR_FREE(sysfs_path); + return ret; } int qemuProcessStart(virConnectPtr conn, -- 1.8.1.2

2 1

[libvirt] RFC: APIs for managing resource groups
by Daniel P. Berrange 26 Feb '13

26 Feb '13

Historically for the QEMU/LXC drivers we've simply put each virtual instance in a dedicated cgroup, under the path $LIBVIRT_CGROUP_LOCATION | +- libvirt | +- qemu | | | +- vm1 | +- vm2 | +- vm3 | +- lxc | +- cont1 +- cont2 +- cont3 for a variety of reasons this nesting sucks. It is too deep causing kernel performance problems, its structure does not easily allow for calculating fixed % shares, it does not allow for grouping of VMs. We need to simplify our layout and also introduce some APIs for the grouping of VMs. I won't go into specifics of a new cgroups layout here, just focus on the question of defining a set of APIs that are generic to any hypervisor, for the purpose of setting up VM resource groups. I'm calling the resource cgroup a "partition", since this is all about partitioning workloads. I anticipate a new top level object and APIs for creating/defining it in the usual manner: typedef struct _virPartition virPartition; typedef virPartition *virPartitionPtr; int virConnectListAllPartitions(virConnectPtr conn, virPartitionPtr **partitions, unsigned int flags); virPartitionPtr virPartitionDefineXML(virConnectPtr conn, const char *xml, unsigned int flags); int virPartitionCreate(virPartitionPtr partition, unsigned int flags); int virPartitionCreateXML(virPartitionPtr partition, const char *xml, unsigned int flags); int virPartitionDestroy(virPartitionPtr partition, unsigned int flags); int virPartitionUndefine(virPartitionPtr partition, unsigned int flags); Then I think we'll duplicate all the APIs for setting resource tunables from virDomainPtr against the new object, so we get int virPartitionGetSchedulerParameters(virPartitionPtr partition, virTypedParameterPtr params, int *nparams, unsigned int flags); int virPartitionSetSchedulerParameters(virPartitionPtr partition, virTypedParameterPtr params, int nparams, unsigned int flags) int virDomainSetBlkioParameters(virDomainPtr domain, virTypedParameterPtr params, int nparams, unsigned int flags); int virDomainGetBlkioParameters(virDomainPtr domain, virTypedParameterPtr params, int *nparams, unsigned int flags); int virDomainSetMemoryParameters(virDomainPtr domain, virTypedParameterPtr params, int nparams, unsigned int flags); int virDomainGetMemoryParameters(virDomainPtr domain, virTypedParameterPtr params, int *nparams, unsigned int flags); int virDomainSetNumaParameters(virDomainPtr domain, virTypedParameterPtr params, int nparams, unsigned int flags); int virDomainGetNumaParameters(virDomainPtr domain, virTypedParameterPtr params, int *nparams, unsigned int flags); Finally we need a way to associate a domain with a partition virPartitionPtr virDomainGetPartition(virDomainPtr dom, unsigned int flags); void virDomainSetPartition(virDomainPtr dom, unsigned int flags); There'd also likely be a new VM XML element <partition name="..partition name..."/> which is what the Get/SetPartition methods would be touching. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

3 3

[libvirt] [PATCH] qemu: Don't fail to shutdown domains with unresponsive agent
by Michal Privoznik 26 Feb '13

26 Feb '13

Currently, qemuDomainShutdownFlags() chooses the agent method of shutdown whenever the agent is configured. However, this assumption is not enough as the guest agent may be unresponsive at the moment. So unless guest agent method has been explicitly requested, we should fall back to the ACPI method. --- src/qemu/qemu_driver.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 435c37c..06b14ae 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1702,7 +1702,7 @@ static int qemuDomainShutdownFlags(virDomainPtr dom, unsigned int flags) { virDomainObjPtr vm; int ret = -1; qemuDomainObjPrivatePtr priv; - bool useAgent = false; + bool useAgent = false, agentRequested; virCheckFlags(VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN | VIR_DOMAIN_SHUTDOWN_GUEST_AGENT, -1); @@ -1719,23 +1719,32 @@ static int qemuDomainShutdownFlags(virDomainPtr dom, unsigned int flags) { goto cleanup; priv = vm->privateData; + agentRequested = flags & VIR_DOMAIN_SHUTDOWN_GUEST_AGENT; - if ((flags & VIR_DOMAIN_SHUTDOWN_GUEST_AGENT) || + if (agentRequested || (!(flags & VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN) && priv->agent)) useAgent = true; if (useAgent) { if (priv->agentError) { - virReportError(VIR_ERR_AGENT_UNRESPONSIVE, "%s", - _("QEMU guest agent is not " - "available due to an error")); - goto cleanup; + if (agentRequested) { + virReportError(VIR_ERR_AGENT_UNRESPONSIVE, "%s", + _("QEMU guest agent is not " + "available due to an error")); + goto cleanup; + } else { + useAgent = false; + } } if (!priv->agent) { - virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED, "%s", - _("QEMU guest agent is not configured")); - goto cleanup; + if (agentRequested) { + virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED, "%s", + _("QEMU guest agent is not configured")); + goto cleanup; + } else { + useAgent = false; + } } } @@ -1752,7 +1761,12 @@ static int qemuDomainShutdownFlags(virDomainPtr dom, unsigned int flags) { qemuDomainObjEnterAgent(vm); ret = qemuAgentShutdown(priv->agent, QEMU_AGENT_SHUTDOWN_POWERDOWN); qemuDomainObjExitAgent(vm); - } else { + } + + /* If we are not enforced to use just an agent, try ACPI + * shutdown as well in case agent did not succeed */ + if (!useAgent || + ((ret < 0) && !agentRequested)) { qemuDomainSetFakeReboot(driver, vm, false); qemuDomainObjEnterMonitor(driver, vm); -- 1.8.1.4

2 2

[libvirt] The problem of CPU index
by Li Zhang 26 Feb '13

26 Feb '13

Hi all, In the function qemuMonitorJSONExtractCPUInfo(), it assumes that CPU indexes should be contiguous. As the following: if (cpu != i) { virReportError(VIR_ERR_INTERNAL_ERROR, _("unexpected cpu index %d expecting %d"), i, cpu); goto cleanup; } For x86, in what kind of situation will cause this error? Actually, on ppc64, the CPU indexes always are not contiguous, because smt is always disabled because of hardware's limitation for KVM. For example, smt=4, CPUs=64, cores=16. If with SMT enabled, 0~3 will run on core 0, 4~7 will run on core 1, .... If SMT is disabled, only one thread is active. It should be 0, 4, 8,.... CPU information on my machine is as the following: Architecture: ppc64 Byte Order: Big Endian CPU(s): 64 On-line CPU(s) list: 0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60 Off-line CPU(s) list: 1-3,5-7,9-11,13-15,17-19,21-23,25-27,29-31,33-35,37-39,41-43,45-47,49-51,53-55,57-59,61-63 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 16 NUMA node(s): 2 Model: 8246-L2C L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 4096K L4 cache: 4096K NUMA node0 CPU(s): 0,36,40,44,48,52,56,60 NUMA node1 CPU(s): 4,8,12,16,20,24,28,32 Actually, only 16 CPUs are online. All we get CPUs are 0,4,8,...,60. If possible, could this assumption be removed? Thanks --Li

1 0

[libvirt] [PATCH 1/1] Add NVRAM device
by Li Zhang 26 Feb '13

26 Feb '13

From: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device. Users are allowed to specify spapr-vio devices'address. But NVRAM is not supported in libvirt. So this patch is to add NVRAM device to allow users to specify its address. In QEMU, NVRAM device's address is specified by "-global spapr-nvram.reg=xxxxx". In libvirt, XML file is defined as the following: <nvram> <address type='spapr-vio' reg='0x3000'/> </nvram> Signed-off-by: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> --- src/conf/domain_conf.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++- src/conf/domain_conf.h | 10 ++++++ src/qemu/qemu_command.c | 31 ++++++++++++++++++ src/qemu/qemu_command.h | 2 ++ 4 files changed, 125 insertions(+), 1 deletion(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 10f361c..8c1e8ae 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -175,7 +175,8 @@ VIR_ENUM_IMPL(virDomainDevice, VIR_DOMAIN_DEVICE_LAST, "redirdev", "smartcard", "chr", - "memballoon") + "memballoon", + "nvram") VIR_ENUM_IMPL(virDomainDeviceAddress, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_LAST, "none", @@ -1442,6 +1443,16 @@ void virDomainMemballoonDefFree(virDomainMemballoonDefPtr def) VIR_FREE(def); } +void virDomainNVRAMDefFree(virDomainNVRAMDefPtr def) +{ + if (!def) + return; + + virDomainDeviceInfoClear(&def->info); + + VIR_FREE(def); +} + void virDomainWatchdogDefFree(virDomainWatchdogDefPtr def) { if (!def) @@ -1602,6 +1613,7 @@ void virDomainDeviceDefFree(virDomainDeviceDefPtr def) case VIR_DOMAIN_DEVICE_SMARTCARD: case VIR_DOMAIN_DEVICE_CHR: case VIR_DOMAIN_DEVICE_MEMBALLOON: + case VIR_DOMAIN_DEVICE_NVRAM: case VIR_DOMAIN_DEVICE_LAST: break; } @@ -1791,6 +1803,7 @@ void virDomainDefFree(virDomainDefPtr def) virDomainWatchdogDefFree(def->watchdog); virDomainMemballoonDefFree(def->memballoon); + virDomainNVRAMDefFree(def->nvram); for (i = 0; i < def->nseclabels; i++) virSecurityLabelDefFree(def->seclabels[i]); @@ -2342,6 +2355,12 @@ int virDomainDeviceInfoIterate(virDomainDefPtr def, if (cb(def, &device, &def->memballoon->info, opaque) < 0) return -1; } + if (def->nvram) { + device.type = VIR_DOMAIN_DEVICE_NVRAM; + device.data.nvram = def->nvram; + if (cb(def, &device, &def->nvram->info, opaque) < 0) + return -1; + } device.type = VIR_DOMAIN_DEVICE_HUB; for (i = 0; i < def->nhubs ; i++) { device.data.hub = def->hubs[i]; @@ -7461,6 +7480,23 @@ error: goto cleanup; } +static virDomainNVRAMDefPtr +virDomainNVRAMDefParseXML(const xmlNodePtr node, + unsigned int flags) +{ + virDomainNVRAMDefPtr def; + + if (VIR_ALLOC(def) < 0) { + virReportOOMError(); + return NULL; + } + + if ( virDomainDeviceInfoParseXML(node, NULL, &def->info, flags) < 0 ) + return NULL; + + return def; +} + static virSysinfoDefPtr virSysinfoParseXML(const xmlNodePtr node, xmlXPathContextPtr ctxt) @@ -10572,6 +10608,32 @@ virDomainDefParseXML(virCapsPtr caps, } } + def->nvram = NULL; + if ((n = virXPathNodeSet("./devices/nvram", ctxt, &nodes)) < 0) { + goto error; + } + + if (n > 1) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("only a single nvram device is supported")); + goto error; + } + + if (n > 0) { + virDomainNVRAMDefPtr nvram = + virDomainNVRAMDefParseXML(nodes[0], flags); + if (!nvram) + goto error; + def->nvram = nvram; + VIR_FREE(nodes); + } else { + virDomainNVRAMDefPtr nvram; + if (VIR_ALLOC(nvram) < 0) + goto no_memory; + nvram->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE; + def->nvram = nvram; + } + /* analysis of the hub devices */ if ((n = virXPathNodeSet("./devices/hub", ctxt, &nodes)) < 0) { goto error; @@ -13547,6 +13609,21 @@ virDomainMemballoonDefFormat(virBufferPtr buf, } static int +virDomainNVRAMDefFormat(virBufferPtr buf, + virDomainNVRAMDefPtr def, + unsigned int flags) +{ + virBufferAsprintf(buf, " <nvram>\n"); + if (virDomainDeviceInfoIsSet(&def->info, flags)) + if (virDomainDeviceInfoFormat(buf, &def->info, flags) < 0) + return -1; + + virBufferAddLit(buf, " </nvram>\n"); + + return 0; +} + +static int virDomainSysinfoDefFormat(virBufferPtr buf, virSysinfoDefPtr def) { @@ -14787,6 +14864,9 @@ virDomainDefFormatInternal(virDomainDefPtr def, if (def->memballoon) virDomainMemballoonDefFormat(buf, def->memballoon, flags); + if (def->nvram) + virDomainNVRAMDefFormat(buf, def->nvram, flags); + virBufferAddLit(buf, " </devices>\n"); virBufferAdjustIndent(buf, 2); @@ -16061,6 +16141,7 @@ virDomainDeviceDefCopy(virCapsPtr caps, case VIR_DOMAIN_DEVICE_SMARTCARD: case VIR_DOMAIN_DEVICE_CHR: case VIR_DOMAIN_DEVICE_MEMBALLOON: + case VIR_DOMAIN_DEVICE_NVRAM: case VIR_DOMAIN_DEVICE_LAST: virReportError(VIR_ERR_INTERNAL_ERROR, _("Copying definition of '%d' type " diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 4ffa4aa..8e5f1d8 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -108,6 +108,9 @@ typedef virDomainChrDef *virDomainChrDefPtr; typedef struct _virDomainMemballoonDef virDomainMemballoonDef; typedef virDomainMemballoonDef *virDomainMemballoonDefPtr; +typedef struct _virDomainNVRAMDef virDomainNVRAMDef; +typedef virDomainNVRAMDef *virDomainNVRAMDefPtr; + typedef struct _virDomainSnapshotObj virDomainSnapshotObj; typedef virDomainSnapshotObj *virDomainSnapshotObjPtr; @@ -133,6 +136,7 @@ typedef enum { VIR_DOMAIN_DEVICE_SMARTCARD, VIR_DOMAIN_DEVICE_CHR, VIR_DOMAIN_DEVICE_MEMBALLOON, + VIR_DOMAIN_DEVICE_NVRAM, VIR_DOMAIN_DEVICE_LAST } virDomainDeviceType; @@ -158,6 +162,7 @@ struct _virDomainDeviceDef { virDomainSmartcardDefPtr smartcard; virDomainChrDefPtr chr; virDomainMemballoonDefPtr memballoon; + virDomainNVRAMDefPtr nvram; } data; }; @@ -1418,6 +1423,9 @@ struct _virDomainMemballoonDef { virDomainDeviceInfo info; }; +struct _virDomainNVRAMDef { + virDomainDeviceInfo info; +}; enum virDomainSmbiosMode { VIR_DOMAIN_SMBIOS_NONE, @@ -1849,6 +1857,7 @@ struct _virDomainDef { /* Only 1 */ virDomainWatchdogDefPtr watchdog; virDomainMemballoonDefPtr memballoon; + virDomainNVRAMDefPtr nvram; virCPUDefPtr cpu; virSysinfoDefPtr sysinfo; virDomainRedirFilterDefPtr redirfilter; @@ -1951,6 +1960,7 @@ int virDomainChrSourceDefCopy(virDomainChrSourceDefPtr src, void virDomainSoundCodecDefFree(virDomainSoundCodecDefPtr def); void virDomainSoundDefFree(virDomainSoundDefPtr def); void virDomainMemballoonDefFree(virDomainMemballoonDefPtr def); +void virDomainNVRAMDefFree(virDomainNVRAMDefPtr def); void virDomainWatchdogDefFree(virDomainWatchdogDefPtr def); void virDomainVideoDefFree(virDomainVideoDefPtr def); virDomainHostdevDefPtr virDomainHostdevDefAlloc(void); diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index dee493f..6e1e0e6 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -941,6 +941,13 @@ int qemuDomainAssignSpaprVIOAddresses(virDomainDefPtr def, goto cleanup; } + if (def->os.arch == VIR_ARCH_PPC64 && + STREQ(def->os.machine, "pseries")) + def->nvram->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO; + if (qemuAssignSpaprVIOAddress(def, &def->nvram->info, + 0x3000ul) < 0) + goto cleanup; + /* No other devices are currently supported on spapr-vio */ ret = 0; @@ -3406,6 +3413,17 @@ error: return NULL; } +char * +qemuBuildNVRAMDevStr(virDomainNVRAMDefPtr dev) +{ + virBuffer buf = VIR_BUFFER_INITIALIZER; + if (dev->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO && + dev->info.addr.spaprvio.has_reg) + virBufferAsprintf(&buf, "spapr-nvram.reg=0x%llx", + dev->info.addr.spaprvio.reg); + + return virBufferContentAndReset(&buf); +} char * qemuBuildUSBInputDevStr(virDomainInputDefPtr dev, @@ -7006,6 +7024,19 @@ qemuBuildCommandLine(virConnectPtr conn, } } + if (def->nvram && + def->os.arch == VIR_ARCH_PPC64 && + STREQ(def->os.machine, "pseries")) { + char *optstr; + virCommandAddArg(cmd, "-global"); + optstr = qemuBuildNVRAMDevStr(def->nvram); + if (!optstr) + goto error; + if (optstr) + virCommandAddArg(cmd, optstr); + VIR_FREE(optstr); + } + if (snapshot) virCommandAddArgList(cmd, "-loadvm", snapshot->def->name, NULL); diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h index e4db000..7a0fe17 100644 --- a/src/qemu/qemu_command.h +++ b/src/qemu/qemu_command.h @@ -118,6 +118,8 @@ char * qemuBuildWatchdogDevStr(virDomainWatchdogDefPtr dev, char * qemuBuildMemballoonDevStr(virDomainMemballoonDefPtr dev, virQEMUCapsPtr qemuCaps); +char * qemuBuildNVRAMDevStr(virDomainNVRAMDefPtr dev); + char * qemuBuildUSBInputDevStr(virDomainInputDefPtr dev, virQEMUCapsPtr qemuCaps); -- 1.7.10.1

1 4

[libvirt] [PATCH v2 1/1] Add NVRAM device
by Li Zhang 26 Feb '13

26 Feb '13

From: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device. Users are allowed to specify spapr-vio devices'address. But NVRAM is not supported in libvirt. So this patch is to add NVRAM device to allow users to specify its address. In QEMU, NVRAM device's address is specified by "-global spapr-nvram.reg=xxxxx". In libvirt, XML file is defined as the following: <nvram> <address type='spapr-vio' reg='0x3000'/> </nvram> Signed-off-by: Li Zhang <zhlcindy(a)linux.vnet.ibm.com> --- * v2 -> v1: Add NVRAM parameters parsing in qemuParseCommandLine. src/conf/domain_conf.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++- src/conf/domain_conf.h | 10 ++++++ src/qemu/qemu_command.c | 48 +++++++++++++++++++++++++++ src/qemu/qemu_command.h | 2 ++ 4 files changed, 142 insertions(+), 1 deletion(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 10f361c..8c1e8ae 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -175,7 +175,8 @@ VIR_ENUM_IMPL(virDomainDevice, VIR_DOMAIN_DEVICE_LAST, "redirdev", "smartcard", "chr", - "memballoon") + "memballoon", + "nvram") VIR_ENUM_IMPL(virDomainDeviceAddress, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_LAST, "none", @@ -1442,6 +1443,16 @@ void virDomainMemballoonDefFree(virDomainMemballoonDefPtr def) VIR_FREE(def); } +void virDomainNVRAMDefFree(virDomainNVRAMDefPtr def) +{ + if (!def) + return; + + virDomainDeviceInfoClear(&def->info); + + VIR_FREE(def); +} + void virDomainWatchdogDefFree(virDomainWatchdogDefPtr def) { if (!def) @@ -1602,6 +1613,7 @@ void virDomainDeviceDefFree(virDomainDeviceDefPtr def) case VIR_DOMAIN_DEVICE_SMARTCARD: case VIR_DOMAIN_DEVICE_CHR: case VIR_DOMAIN_DEVICE_MEMBALLOON: + case VIR_DOMAIN_DEVICE_NVRAM: case VIR_DOMAIN_DEVICE_LAST: break; } @@ -1791,6 +1803,7 @@ void virDomainDefFree(virDomainDefPtr def) virDomainWatchdogDefFree(def->watchdog); virDomainMemballoonDefFree(def->memballoon); + virDomainNVRAMDefFree(def->nvram); for (i = 0; i < def->nseclabels; i++) virSecurityLabelDefFree(def->seclabels[i]); @@ -2342,6 +2355,12 @@ int virDomainDeviceInfoIterate(virDomainDefPtr def, if (cb(def, &device, &def->memballoon->info, opaque) < 0) return -1; } + if (def->nvram) { + device.type = VIR_DOMAIN_DEVICE_NVRAM; + device.data.nvram = def->nvram; + if (cb(def, &device, &def->nvram->info, opaque) < 0) + return -1; + } device.type = VIR_DOMAIN_DEVICE_HUB; for (i = 0; i < def->nhubs ; i++) { device.data.hub = def->hubs[i]; @@ -7461,6 +7480,23 @@ error: goto cleanup; } +static virDomainNVRAMDefPtr +virDomainNVRAMDefParseXML(const xmlNodePtr node, + unsigned int flags) +{ + virDomainNVRAMDefPtr def; + + if (VIR_ALLOC(def) < 0) { + virReportOOMError(); + return NULL; + } + + if ( virDomainDeviceInfoParseXML(node, NULL, &def->info, flags) < 0 ) + return NULL; + + return def; +} + static virSysinfoDefPtr virSysinfoParseXML(const xmlNodePtr node, xmlXPathContextPtr ctxt) @@ -10572,6 +10608,32 @@ virDomainDefParseXML(virCapsPtr caps, } } + def->nvram = NULL; + if ((n = virXPathNodeSet("./devices/nvram", ctxt, &nodes)) < 0) { + goto error; + } + + if (n > 1) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("only a single nvram device is supported")); + goto error; + } + + if (n > 0) { + virDomainNVRAMDefPtr nvram = + virDomainNVRAMDefParseXML(nodes[0], flags); + if (!nvram) + goto error; + def->nvram = nvram; + VIR_FREE(nodes); + } else { + virDomainNVRAMDefPtr nvram; + if (VIR_ALLOC(nvram) < 0) + goto no_memory; + nvram->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE; + def->nvram = nvram; + } + /* analysis of the hub devices */ if ((n = virXPathNodeSet("./devices/hub", ctxt, &nodes)) < 0) { goto error; @@ -13547,6 +13609,21 @@ virDomainMemballoonDefFormat(virBufferPtr buf, } static int +virDomainNVRAMDefFormat(virBufferPtr buf, + virDomainNVRAMDefPtr def, + unsigned int flags) +{ + virBufferAsprintf(buf, " <nvram>\n"); + if (virDomainDeviceInfoIsSet(&def->info, flags)) + if (virDomainDeviceInfoFormat(buf, &def->info, flags) < 0) + return -1; + + virBufferAddLit(buf, " </nvram>\n"); + + return 0; +} + +static int virDomainSysinfoDefFormat(virBufferPtr buf, virSysinfoDefPtr def) { @@ -14787,6 +14864,9 @@ virDomainDefFormatInternal(virDomainDefPtr def, if (def->memballoon) virDomainMemballoonDefFormat(buf, def->memballoon, flags); + if (def->nvram) + virDomainNVRAMDefFormat(buf, def->nvram, flags); + virBufferAddLit(buf, " </devices>\n"); virBufferAdjustIndent(buf, 2); @@ -16061,6 +16141,7 @@ virDomainDeviceDefCopy(virCapsPtr caps, case VIR_DOMAIN_DEVICE_SMARTCARD: case VIR_DOMAIN_DEVICE_CHR: case VIR_DOMAIN_DEVICE_MEMBALLOON: + case VIR_DOMAIN_DEVICE_NVRAM: case VIR_DOMAIN_DEVICE_LAST: virReportError(VIR_ERR_INTERNAL_ERROR, _("Copying definition of '%d' type " diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 4ffa4aa..8e5f1d8 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -108,6 +108,9 @@ typedef virDomainChrDef *virDomainChrDefPtr; typedef struct _virDomainMemballoonDef virDomainMemballoonDef; typedef virDomainMemballoonDef *virDomainMemballoonDefPtr; +typedef struct _virDomainNVRAMDef virDomainNVRAMDef; +typedef virDomainNVRAMDef *virDomainNVRAMDefPtr; + typedef struct _virDomainSnapshotObj virDomainSnapshotObj; typedef virDomainSnapshotObj *virDomainSnapshotObjPtr; @@ -133,6 +136,7 @@ typedef enum { VIR_DOMAIN_DEVICE_SMARTCARD, VIR_DOMAIN_DEVICE_CHR, VIR_DOMAIN_DEVICE_MEMBALLOON, + VIR_DOMAIN_DEVICE_NVRAM, VIR_DOMAIN_DEVICE_LAST } virDomainDeviceType; @@ -158,6 +162,7 @@ struct _virDomainDeviceDef { virDomainSmartcardDefPtr smartcard; virDomainChrDefPtr chr; virDomainMemballoonDefPtr memballoon; + virDomainNVRAMDefPtr nvram; } data; }; @@ -1418,6 +1423,9 @@ struct _virDomainMemballoonDef { virDomainDeviceInfo info; }; +struct _virDomainNVRAMDef { + virDomainDeviceInfo info; +}; enum virDomainSmbiosMode { VIR_DOMAIN_SMBIOS_NONE, @@ -1849,6 +1857,7 @@ struct _virDomainDef { /* Only 1 */ virDomainWatchdogDefPtr watchdog; virDomainMemballoonDefPtr memballoon; + virDomainNVRAMDefPtr nvram; virCPUDefPtr cpu; virSysinfoDefPtr sysinfo; virDomainRedirFilterDefPtr redirfilter; @@ -1951,6 +1960,7 @@ int virDomainChrSourceDefCopy(virDomainChrSourceDefPtr src, void virDomainSoundCodecDefFree(virDomainSoundCodecDefPtr def); void virDomainSoundDefFree(virDomainSoundDefPtr def); void virDomainMemballoonDefFree(virDomainMemballoonDefPtr def); +void virDomainNVRAMDefFree(virDomainNVRAMDefPtr def); void virDomainWatchdogDefFree(virDomainWatchdogDefPtr def); void virDomainVideoDefFree(virDomainVideoDefPtr def); virDomainHostdevDefPtr virDomainHostdevDefAlloc(void); diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index dee493f..30694d6 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -941,6 +941,13 @@ int qemuDomainAssignSpaprVIOAddresses(virDomainDefPtr def, goto cleanup; } + if (def->os.arch == VIR_ARCH_PPC64 && + STREQ(def->os.machine, "pseries")) + def->nvram->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO; + if (qemuAssignSpaprVIOAddress(def, &def->nvram->info, + 0x3000ul) < 0) + goto cleanup; + /* No other devices are currently supported on spapr-vio */ ret = 0; @@ -3406,6 +3413,17 @@ error: return NULL; } +char * +qemuBuildNVRAMDevStr(virDomainNVRAMDefPtr dev) +{ + virBuffer buf = VIR_BUFFER_INITIALIZER; + if (dev->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO && + dev->info.addr.spaprvio.has_reg) + virBufferAsprintf(&buf, "spapr-nvram.reg=0x%llx", + dev->info.addr.spaprvio.reg); + + return virBufferContentAndReset(&buf); +} char * qemuBuildUSBInputDevStr(virDomainInputDefPtr dev, @@ -7006,6 +7024,19 @@ qemuBuildCommandLine(virConnectPtr conn, } } + if (def->nvram && + def->os.arch == VIR_ARCH_PPC64 && + STREQ(def->os.machine, "pseries")) { + char *optstr; + virCommandAddArg(cmd, "-global"); + optstr = qemuBuildNVRAMDevStr(def->nvram); + if (!optstr) + goto error; + if (optstr) + virCommandAddArg(cmd, optstr); + VIR_FREE(optstr); + } + if (snapshot) virCommandAddArgList(cmd, "-loadvm", snapshot->def->name, NULL); @@ -9139,6 +9170,23 @@ virDomainDefPtr qemuParseCommandLine(virCapsPtr qemuCaps, goto error; } + } else if (STREQ(arg, "-global") && + STRPREFIX(progargv[i + 1], "spapr-nvram.reg=")) { + + WANT_VALUE(); + + if (VIR_ALLOC(def->nvram) < 0) + goto no_memory; + + val += strlen("spapr-nvram.reg="); + if (virStrToLong_ull(val, NULL, 16, + &def->nvram->info.addr.spaprvio.reg) < 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("invalid value for spapr-nvram.reg :" + "'%s'"), val); + goto error; + } + } else if (STREQ(arg, "-S")) { /* ignore, always added by libvirt */ } else { diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h index e4db000..7a0fe17 100644 --- a/src/qemu/qemu_command.h +++ b/src/qemu/qemu_command.h @@ -118,6 +118,8 @@ char * qemuBuildWatchdogDevStr(virDomainWatchdogDefPtr dev, char * qemuBuildMemballoonDevStr(virDomainMemballoonDefPtr dev, virQEMUCapsPtr qemuCaps); +char * qemuBuildNVRAMDevStr(virDomainNVRAMDefPtr dev); + char * qemuBuildUSBInputDevStr(virDomainInputDefPtr dev, virQEMUCapsPtr qemuCaps); -- 1.7.10.1

1 1

[libvirt] [PATCH] wrap some long lines
by liguang 26 Feb '13

26 Feb '13

Signed-off-by: liguang <lig.fnst(a)cn.fujitsu.com> --- src/qemu/qemu_command.c | 71 ++++++++++++++++++++++++++++++---------------- 1 files changed, 46 insertions(+), 25 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 9ad3c77..ad62120 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -611,7 +611,8 @@ qemuAssignDeviceNetAlias(virDomainDefPtr def, virDomainNetDefPtr net, int idx) } if ((thisidx = qemuDomainDeviceAliasIndex(&def->nets[i]->info, "net")) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Unable to determine device index for network device")); + _("Unable to determine device index for " + "network device")); return -1; } if (thisidx >= idx) @@ -638,7 +639,8 @@ qemuAssignDeviceHostdevAlias(virDomainDefPtr def, virDomainHostdevDefPtr hostdev int thisidx; if ((thisidx = qemuDomainDeviceAliasIndex(def->hostdevs[i]->info, "hostdev")) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Unable to determine device index for hostdev device")); + _("Unable to determine device index for " + "hostdev device")); return -1; } if (thisidx >= idx) @@ -665,7 +667,8 @@ qemuAssignDeviceRedirdevAlias(virDomainDefPtr def, virDomainRedirdevDefPtr redir int thisidx; if ((thisidx = qemuDomainDeviceAliasIndex(&def->redirdevs[i]->info, "redir")) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Unable to determine device index for redirected device")); + _("Unable to determine device index for" + " redirected device")); return -1; } if (thisidx >= idx) @@ -1001,8 +1004,8 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED, if (info->addr.pci.function != 0) { virReportError(VIR_ERR_XML_ERROR, _("Attempted double use of PCI Address '%s' " - "(may need \"multifunction='on'\" for device on function 0)"), - addr); + "(may need \"multifunction='on'\" for " + "device on function 0)"), addr); } else { virReportError(VIR_ERR_XML_ERROR, _("Attempted double use of PCI Address '%s'"), addr); @@ -1036,7 +1039,8 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED, goto cleanup; } - VIR_DEBUG("Remembering PCI addr %s (multifunction=off for function 0)", addr); + VIR_DEBUG("Remembering PCI addr %s (multifunction=off" + " for function 0)", addr); if (virHashAddEntry(addrs->used, addr, addr)) goto cleanup; addr = NULL; @@ -1468,7 +1472,8 @@ qemuAssignDevicePCISlots(virDomainDefPtr def, def->controllers[i]->info.addr.pci.slot != 1 || def->controllers[i]->info.addr.pci.function != 2) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("PIIX3 USB controller must have PCI address 0:0:1.2")); + _("PIIX3 USB controller must have" + " PCI address 0:0:1.2")); goto error; } reservedUSB = true; @@ -1524,7 +1529,8 @@ qemuAssignDevicePCISlots(virDomainDefPtr def, primaryVideo->info.addr.pci.slot != 2 || primaryVideo->info.addr.pci.function != 0) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Primary video card must have PCI address 0:0:2.0")); + _("Primary video card must have " + "PCI address 0:0:2.0")); goto error; } /* If TYPE==PCI, then qemuCollectPCIAddress() function @@ -1814,12 +1820,14 @@ qemuBuildRomStr(virBufferPtr buf, if (info->rombar || info->romfile) { if (info->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - "%s", _("rombar and romfile are supported only for PCI devices")); + "%s", _("rombar and romfile are supported " + "only for PCI devices")); return -1; } if (!qemuCapsGet(caps, QEMU_CAPS_PCI_ROMBAR)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - "%s", _("rombar and romfile not supported in this QEMU binary")); + "%s", _("rombar and romfile not supported " + "in this QEMU binary")); return -1; } @@ -1900,8 +1908,8 @@ qemuBuildRBDString(virConnectPtr conn, VIR_SECRET_GET_VALUE_INTERNAL_CALL); if (secret == NULL) { virReportError(VIR_ERR_INTERNAL_ERROR, - _("could not get the value of the secret for username %s"), - disk->auth.username); + _("could not get the value of the secret for " + "username %s"), disk->auth.username); goto error; } /* qemu/librbd wants it base64 encoded */ @@ -2330,7 +2338,8 @@ qemuBuildDriveStr(virConnectPtr conn ATTRIBUTE_UNUSED, } if (!disk->readonly) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("cannot create virtual FAT disks in read-write mode")); + _("cannot create virtual FAT disks " + "in read-write mode")); goto error; } if (disk->device == VIR_DOMAIN_DISK_DEVICE_FLOPPY) @@ -3231,7 +3240,8 @@ qemuBuildNicDevStr(virDomainNetDefPtr net, } } else { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("virtio-net-pci 'tx' option not supported in this QEMU binary")); + _("virtio-net-pci 'tx' option not supported " + "in this QEMU binary")); goto error; } } @@ -3538,7 +3548,8 @@ qemuBuildSoundCodecStr(virDomainSoundDefPtr sound, } virBufferAsprintf(&buf, "%s,id=%s-codec%d,bus=%s.0,cad=%d", - stype, sound->info.alias, codec->cad, sound->info.alias, codec->cad); + stype, sound->info.alias, codec->cad, + sound->info.alias, codec->cad); return virBufferContentAndReset(&buf); @@ -4978,7 +4989,9 @@ qemuBuildGraphicsCommandLine(virQEMUDriverPtr driver, case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_SECURE: if (!driver->spiceTLS) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("spice secure channels set in XML configuration, but TLS is disabled in qemu.conf")); + _("spice secure channels set in XML " + "configuration, but TLS is disabled " + "in qemu.conf")); goto error; } virBufferAsprintf(&opt, ",tls-channel=%s", @@ -5218,7 +5231,8 @@ qemuBuildCommandLine(virConnectPtr conn, } if (!driver->hugepage_path) { virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("hugepages are disabled by administrator config")); + "%s", _("hugepages are disabled by " + "administrator config")); goto error; } if (!qemuCapsGet(caps, QEMU_CAPS_MEM_PATH)) { @@ -5268,7 +5282,8 @@ qemuBuildCommandLine(virConnectPtr conn, if (!qemuCapsGet(caps, QEMU_CAPS_SMBIOS_TYPE)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("the QEMU binary %s does not support smbios settings"), + _("the QEMU binary %s does not support " + "smbios settings"), emulator); goto error; } @@ -6386,7 +6401,8 @@ qemuBuildCommandLine(virConnectPtr conn, if (!qemuCapsGet(caps, QEMU_CAPS_CHARDEV) || !qemuCapsGet(caps, QEMU_CAPS_DEVICE)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - "%s", _("guestfwd requires QEMU to support -chardev & -device")); + "%s", _("guestfwd requires QEMU to support " + "-chardev & -device")); goto error; } @@ -6405,8 +6421,9 @@ qemuBuildCommandLine(virConnectPtr conn, virCommandAddArg(cmd, "-netdev"); virCommandAddArgFormat(cmd, - "user,guestfwd=tcp:%s:%i,chardev=char%s,id=user-%s", - addr, port, channel->info.alias, + "user,guestfwd=tcp:%s:%i,chardev=char%s, " + "id=user-%s", addr, port, + channel->info.alias, channel->info.alias); VIR_FREE(addr); break; @@ -6414,7 +6431,8 @@ qemuBuildCommandLine(virConnectPtr conn, case VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO: if (!qemuCapsGet(caps, QEMU_CAPS_DEVICE)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("virtio channel requires QEMU to support -device")); + _("virtio channel requires QEMU to support " + "-device")); goto error; } @@ -6643,7 +6661,8 @@ qemuBuildCommandLine(virConnectPtr conn, char *str; if (def->videos[i]->type != VIR_DOMAIN_VIDEO_TYPE_QXL) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("video type %s is only valid as primary video card"), + _("video type %s is only valid as " + "primary video card"), virDomainVideoTypeToString(def->videos[0]->type)); goto error; } @@ -6930,7 +6949,8 @@ qemuBuildCommandLine(virConnectPtr conn, VIR_FREE(devstr); } else { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("PCI device assignment is not supported by this version of qemu")); + _("PCI device assignment is not supported by " + "this version of qemu")); goto error; } } @@ -7010,7 +7030,8 @@ qemuBuildCommandLine(virConnectPtr conn, def->memballoon->model != VIR_DOMAIN_MEMBALLOON_MODEL_NONE) { if (def->memballoon->model != VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("Memory balloon device type '%s' is not supported by this version of qemu"), + _("Memory balloon device type '%s' is not supported " + "by this version of qemu"), virDomainMemballoonModelTypeToString(def->memballoon->model)); goto error; } -- 1.7.2.5

2 1

[libvirt] [PATCH 0/5] fix qemumonitorjsontest
by Eric Blake 26 Feb '13

26 Feb '13

I hit a segv in qemumonitorjsontest on a new machine, and traced it to through several layers of issues, including not having yajl-devel installed on my end. This series fixes the test failure, and several incidental things that I found along the way. Eric Blake (5): qemu: don't override earlier json error qemu: minor monitor lock cleanups tests: avoid segfault if json monitor not present tests: don't test json when not compiled in tests: uniformly report test failures cfg.mk | 7 +++++++ src/qemu/qemu_agent.c | 13 ++++++------- src/qemu/qemu_monitor.c | 12 ++++-------- src/qemu/qemu_monitor_json.c | 8 +++----- tests/commandhelper.c | 7 +++---- tests/qemumonitorjsontest.c | 14 ++++++++------ tests/qemumonitortestutils.c | 4 ++++ tests/seclabeltest.c | 8 ++++---- tests/securityselinuxlabeltest.c | 6 +++--- tests/securityselinuxtest.c | 6 +++--- tests/testutils.c | 8 ++++---- tests/testutils.h | 4 ++-- 12 files changed, 51 insertions(+), 46 deletions(-) -- 1.8.1.2

2 11

[libvirt] [PATCH] ESX: Add AnyType_Serialize routine to esx_vi_types.c
by Ata E Husain Bohra 25 Feb '13

25 Feb '13

Add esxVI_AnyType_Serialize routine to allow serialization of objects containing variables of type "AnyType". The routine attempts to determine the type of the object that covers: boolean, long, int, string, short, byte. If variables does not fall under any above mentioned types then it is added as "anyType". --- src/esx/esx_vi_types.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ src/esx/esx_vi_types.h | 3 ++- 2 files changed, 50 insertions(+), 1 deletion(-) diff --git a/src/esx/esx_vi_types.c b/src/esx/esx_vi_types.c index d1f91ff..2076ce4 100644 --- a/src/esx/esx_vi_types.c +++ b/src/esx/esx_vi_types.c @@ -1130,6 +1130,54 @@ esxVI_AnyType_Deserialize(xmlNodePtr node, esxVI_AnyType **anyType) +int +esxVI_AnyType_Serialize(esxVI_AnyType *anyType, const char *element, + virBufferPtr output) +{ + if (element == NULL || output == NULL) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Invalid argument")); + return -1; + } + + if (anyType == NULL || anyType->value == NULL) { + return 0; + } + + switch (anyType->type) { + case esxVI_Type_Boolean: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:boolean"); + break; + case esxVI_Type_String: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:string"); + break; + case esxVI_Type_Short: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:short"); + break; + case esxVI_Type_Byte: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:byte"); + break; + case esxVI_Type_Int: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:int"); + break; + case esxVI_Type_Long: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:long"); + break; + case esxVI_Type_Undefined: + case esxVI_Type_Other: + default: + ESV_VI__XML_TAG__OPEN(output, element, "xsd:anyType"); + break; + } + + virBufferAdd(output, anyType->value, -1); + + ESV_VI__XML_TAG__CLOSE(output, element); + + return 0; +} + + /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * XSD: String */ diff --git a/src/esx/esx_vi_types.h b/src/esx/esx_vi_types.h index 92dc16f..5150377 100644 --- a/src/esx/esx_vi_types.h +++ b/src/esx/esx_vi_types.h @@ -161,7 +161,8 @@ const char *esxVI_AnyType_TypeToString(esxVI_AnyType *anyType); int esxVI_AnyType_ExpectType(esxVI_AnyType *anyType, esxVI_Type type); int esxVI_AnyType_DeepCopy(esxVI_AnyType **dest, esxVI_AnyType *src); int esxVI_AnyType_Deserialize(xmlNodePtr node, esxVI_AnyType **anyType); - +int esxVI_AnyType_Serialize(esxVI_AnyType *anyType, const char *element, + virBufferPtr output); /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -- 1.7.9.5

3 3

[libvirt] [PATCHv2 0/8] VirtIO RNG device support
by Peter Krempa 25 Feb '13

25 Feb '13

Version 2 fixes comments by John and several improvements I noticed. There's 1 new patch in this series. See patch notes for more info. Peter Krempa (8): conf: Add fake switch statement to warn for new device types doc: schema: Add basic documentation for the virtual RNG device support conf: Add support for RNG device configuration in XML conf: Add RNG device ABI compatibility check qemu: Implement support for default 'random' backend for virtio-rng qemu: Implement support for EGD backend for virtio-rng tests: Add tests for virtio-rng device handling virtio-rng: Add rate limiting options for virtio-RNG docs/formatdomain.html.in | 78 ++++++ docs/schemas/domaincommon.rng | 48 ++++ src/conf/domain_conf.c | 293 ++++++++++++++++++++- src/conf/domain_conf.h | 39 +++ src/libvirt_private.syms | 2 + src/qemu/qemu_capabilities.c | 6 + src/qemu/qemu_capabilities.h | 4 + src/qemu/qemu_command.c | 123 +++++++++ .../qemuxml2argv-virtio-rng-egd.args | 1 + .../qemuxml2argv-virtio-rng-egd.xml | 26 ++ .../qemuxml2argv-virtio-rng-random.args | 1 + .../qemuxml2argv-virtio-rng-random.xml | 24 ++ tests/qemuxml2argvtest.c | 5 + tests/qemuxml2xmltest.c | 3 + 14 files changed, 652 insertions(+), 1 deletion(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-egd.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-egd.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml -- 1.8.1.1

3 25

[libvirt] [PATCH] conf: Avoid leaking of RNG device definition
by Peter Krempa 25 Feb '13

25 Feb '13

--- Yet another place not guarded by the compiler :( This should qualify as trivial, so I'm pushing it directly. src/conf/domain_conf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 3cb780d..b65e52a 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -1775,6 +1775,8 @@ void virDomainDefFree(virDomainDefPtr def) virDomainRedirdevDefFree(def->redirdevs[i]); VIR_FREE(def->redirdevs); + virDomainRNGDefFree(def->rng); + VIR_FREE(def->os.type); VIR_FREE(def->os.machine); VIR_FREE(def->os.init); -- 1.8.1.1

1 0

[libvirt] [PATCH] qemu: enable direct migration over IPv6
by Ján Tomko 25 Feb '13

25 Feb '13

Use virURIParse in qemuMigrationPrepareDirect to allow parsing IPv6 addresses, which would cause an 'incorrect :port' error message before. To be able to migrate over IPv6, QEMU needs to listen on [::] instead of 0.0.0.0. This patch adds a call to getaddrinfo and sets the listen address based on the result. It also uses the same listen address for the NBD server. This will break migration if a hostname does not resolve to the same address family on both sides. Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013 --- Diff to V1: * initialize uri_str * reuse STRSKIP("tcp:") result instead of doing strlen on it * print a warning instead of failing when the hostname can't be resolved Diff to V2: * freeaddrinfo * separate the listen address to allow reuse in qemuMigrationStartNBDServer src/qemu/qemu_migration.c | 77 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 59 insertions(+), 18 deletions(-) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index cae58fa..ff9b959 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -22,7 +22,10 @@ #include <config.h> +#include <netdb.h> +#include <sys/socket.h> #include <sys/time.h> +#include <sys/types.h> #ifdef WITH_GNUTLS # include <gnutls/gnutls.h> # include <gnutls/x509.h> @@ -1103,12 +1106,12 @@ error: */ static int qemuMigrationStartNBDServer(virQEMUDriverPtr driver, - virDomainObjPtr vm) + virDomainObjPtr vm, + const char *listenAddr) { int ret = -1; qemuDomainObjPrivatePtr priv = vm->privateData; unsigned short port = 0; - const char *listenAddr = "0.0.0.0"; char *diskAlias = NULL; size_t i; @@ -1981,6 +1984,7 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, const char *dom_xml, const char *migrateFrom, virStreamPtr st, + const char *listenAddr, unsigned long flags) { virDomainDefPtr def = NULL; @@ -2168,7 +2172,7 @@ done: if (flags & VIR_MIGRATE_TUNNELLED) VIR_DEBUG("NBD in tunnelled migration is currently not supported"); else { - if (qemuMigrationStartNBDServer(driver, vm) < 0) { + if (qemuMigrationStartNBDServer(driver, vm, listenAddr) < 0) { /* error already reported */ goto endjob; } @@ -2271,7 +2275,7 @@ qemuMigrationPrepareTunnel(virQEMUDriverPtr driver, */ ret = qemuMigrationPrepareAny(driver, dconn, cookiein, cookieinlen, cookieout, cookieoutlen, dname, dom_xml, - "stdio", st, flags); + "stdio", st, NULL, flags); return ret; } @@ -2292,9 +2296,14 @@ qemuMigrationPrepareDirect(virQEMUDriverPtr driver, static int port = 0; int this_port; char *hostname = NULL; + char listenAddr[8]; char migrateFrom [64]; const char *p; + char *uri_str = NULL; int ret = -1; + bool ipv6 = false; + struct addrinfo *info; + virURIPtr uri; VIR_DEBUG("driver=%p, dconn=%p, cookiein=%s, cookieinlen=%d, " "cookieout=%p, cookieoutlen=%p, uri_in=%s, uri_out=%p, " @@ -2343,16 +2352,39 @@ qemuMigrationPrepareDirect(virQEMUDriverPtr driver, * URI when passing it to the qemu monitor, so bad * characters in hostname part don't matter. */ - if (!STRPREFIX(uri_in, "tcp:")) { + if (!(p = STRSKIP(uri_in, "tcp:"))) { virReportError(VIR_ERR_INVALID_ARG, "%s", _("only tcp URIs are supported for KVM/QEMU" " migrations")); goto cleanup; } - /* Get the port number. */ - p = strrchr(uri_in, ':'); - if (p == strchr(uri_in, ':')) { + /* Convert uri_in to well-formed URI with // after tcp: */ + if (!(STRPREFIX(uri_in, "tcp://"))) { + if (virAsprintf(&uri_str, "tcp://%s", p) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + uri = virURIParse(uri_str ? uri_str : uri_in); + VIR_FREE(uri_str); + + if (uri == NULL) { + virReportError(VIR_ERR_INVALID_ARG, _("unable to parse URI: %s"), + uri_in); + goto cleanup; + } + + if (uri->server == NULL) { + virReportError(VIR_ERR_INVALID_ARG, _("missing host in migration" + " URI: %s"), uri_in); + goto cleanup; + } else { + hostname = uri->server; + } + + if (uri->port == 0) { /* Generate a port */ this_port = QEMUD_MIGRATION_FIRST_PORT + port++; if (port == QEMUD_MIGRATION_NUM_PORTS) @@ -2365,25 +2397,34 @@ qemuMigrationPrepareDirect(virQEMUDriverPtr driver, } } else { - p++; /* definitely has a ':' in it, see above */ - this_port = virParseNumber(&p); - if (this_port == -1 || p-uri_in != strlen(uri_in)) { - virReportError(VIR_ERR_INVALID_ARG, - "%s", _("URI ended with incorrect ':port'")); - goto cleanup; - } + this_port = uri->port; } } + if (getaddrinfo(hostname, NULL, NULL, &info)) { + VIR_WARN("unable to get address info for %s, defaulting to IPv4", + hostname); + } else { + ipv6 = info->ai_family == AF_INET6; + freeaddrinfo(info); + } + if (*uri_out) VIR_DEBUG("Generated uri_out=%s", *uri_out); - /* QEMU will be started with -incoming tcp:0.0.0.0:port */ - snprintf(migrateFrom, sizeof(migrateFrom), "tcp:0.0.0.0:%d", this_port); + /* QEMU will be started with -incoming tcp:0.0.0.0:port + * or -incoming tcp:[::]:port for IPv6 */ + if (ipv6) + snprintf(listenAddr, sizeof(listenAddr), "[::]"); + else + snprintf(listenAddr, sizeof(listenAddr), "0.0.0.0"); + + snprintf(migrateFrom, sizeof(migrateFrom), + "tcp:%s:%d", listenAddr, this_port); ret = qemuMigrationPrepareAny(driver, dconn, cookiein, cookieinlen, cookieout, cookieoutlen, dname, dom_xml, - migrateFrom, NULL, flags); + migrateFrom, NULL, listenAddr, flags); cleanup: VIR_FREE(hostname); if (ret != 0) -- 1.7.12.4

2 1

[libvirt] [PATCH 0/2] network: add force attribute for dhcp options
by Laine Stump 25 Feb '13

25 Feb '13

The firs patch just fixes unexpected behavior in virNetworkDHCPOptionDefParseXML found when testing the second patch. The second patch adds the "force" attribute I mentioned in the review of the patch that added support for specifying dhcp options in network config. While documenting this new attribute, I noticed that I'd neglected to see that original patch didn't include documentation, so I added full documentation for <option> in order to have a place to add the documentation for "force='yes'". I'm also working on a way to allow specification of option names rather than numbers, but didn't know if I could get it in before the freeze, so I'm sending this patch now. Laine Stump (2): conf: use VIR_EXPAND instead of VIR_REALLOC in virNetworkDHCPDefParseXML network: add force attribute for dhcp options docs/formatnetwork.html.in | 21 ++++++++++++++++++++ src/conf/network_conf.c | 32 +++++++++++++++++++++--------- src/conf/network_conf.h | 3 ++- src/network/bridge_driver.c | 3 ++- tests/networkxml2confdata/nat-network.conf | 2 +- tests/networkxml2confdata/nat-network.xml | 2 +- 6 files changed, 50 insertions(+), 13 deletions(-) -- 1.7.11.7

3 5

[libvirt] [PATCH tck] Avoid multicast MAC addrs in tests
by Daniel P. Berrange 25 Feb '13

25 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> Certain MAC addrs are used for multicast and recent libvirt will refuse to start VMs using those addrs. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- scripts/domain/215-nic-hotplug-many.t | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/domain/215-nic-hotplug-many.t b/scripts/domain/215-nic-hotplug-many.t index 5b935cc..8b4afbd 100644 --- a/scripts/domain/215-nic-hotplug-many.t +++ b/scripts/domain/215-nic-hotplug-many.t @@ -47,9 +47,9 @@ diag "Creating a new transient domain"; my $dom; ok_domain(sub { $dom = $conn->create_domain($xml) }, "created transient domain object"); -my $mac1 = "01:11:22:33:44:55"; -my $mac2 = "02:11:22:33:44:55"; -my $mac3 = "03:11:22:33:44:55"; +my $mac1 = "02:11:22:33:44:51"; +my $mac2 = "02:11:22:33:44:52"; +my $mac3 = "02:11:22:33:44:53"; my $model = "virtio"; my $netxml1 = <<EOF; -- 1.8.1.2

2 1

[libvirt] [PATCH] Fix crash changing CDROM media
by Daniel P. Berrange 25 Feb '13

25 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> This change tried to fix a crash with changing CDROM media but failed to actually do so commit d0172d2b1b5d865aaa042070d7c2d00effb2ff8c Author: Osier Yang <jyang(a)redhat.com> Date: Tue Feb 19 20:27:45 2013 +0800 qemu: Remove the shared disk entry if the operation is ejecting or updating It was still accessing disk->src, when the entire 'disk' object has been free'd already. Even if it weren't free'd, accessing the 'src' value of virDomainDiskDef is not allowed without first validating disk->type is file or block. Just remove the broken code entirely. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_driver.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 1e96915..8dae8f9 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -5778,13 +5778,14 @@ qemuDomainAttachDeviceDiskLive(virConnectPtr conn, dev->data.disk = tmp; ret = qemuDomainChangeEjectableMedia(driver, vm, disk, orig_disk, false); + /* 'disk' must not be accessed now - it has been free'd. + * 'orig_disk' now points to the new disk, while 'dev_copy' + * now points to the old disk */ /* Need to remove the shared disk entry for the original disk src * if the operation is either ejecting or updating. */ - if (ret == 0 && - orig_disk->src && - STRNEQ_NULLABLE(orig_disk->src, disk->src)) + if (ret == 0) ignore_value(qemuRemoveSharedDisk(driver, dev_copy->data.disk, vm->def->name)); break; -- 1.8.1.2

2 1

[libvirt] [PATCH] qemu: Refactor qemuDomainSetMemoryParameters
by Peter Krempa 25 Feb '13

25 Feb '13

The new TypedParam helper APIs allow to simplify this function significantly. This patch integrates the fix in 75e5bec97b3045e4f926248d5c742f8a50d0f9 by correctly ordering the setting functions instead of reordering the parameters. --- src/qemu/qemu_driver.c | 149 ++++++++++++++++++------------------------------- 1 file changed, 54 insertions(+), 95 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 23499ef..f2f5872 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7140,15 +7140,15 @@ qemuDomainSetMemoryParameters(virDomainPtr dom, unsigned int flags) { virQEMUDriverPtr driver = dom->conn->privateData; - int i; virDomainDefPtr persistentDef = NULL; virCgroupPtr group = NULL; virDomainObjPtr vm = NULL; - virTypedParameterPtr hard_limit = NULL; - virTypedParameterPtr swap_hard_limit = NULL; - int hard_limit_index = 0; - int swap_hard_limit_index = 0; - unsigned long long val = 0; + unsigned long long swap_hard_limit; + unsigned long long memory_hard_limit; + unsigned long long memory_soft_limit; + bool set_swap_hard_limit = false; + bool set_memory_hard_limit = false; + bool set_memory_soft_limit = false; virQEMUDriverConfigPtr cfg = NULL; int ret = -1; int rc; @@ -7167,13 +7167,9 @@ qemuDomainSetMemoryParameters(virDomainPtr dom, NULL) < 0) return -1; - vm = virDomainObjListFindByUUID(driver->domains, dom->uuid); - if (vm == NULL) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("No such domain %s"), dom->uuid); - goto cleanup; - } + if (!(vm = qemuDomObjFromDomain(dom))) + return -1; cfg = virQEMUDriverGetConfig(driver); @@ -7198,110 +7194,73 @@ qemuDomainSetMemoryParameters(virDomainPtr dom, } } - for (i = 0; i < nparams; i++) { - if (STREQ(params[i].field, VIR_DOMAIN_MEMORY_HARD_LIMIT)) { - hard_limit = &params[i]; - hard_limit_index = i; - } else if (STREQ(params[i].field, VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT)) { - swap_hard_limit = &params[i]; - swap_hard_limit_index = i; - } - } +#define VIR_GET_LIMIT_PARAMETER(PARAM, VALUE) \ + if ((rc = virTypedParamsGetULLong(params, nparams, PARAM, &VALUE) < 0)) \ + goto cleanup; \ + \ + if (rc == 1) \ + set_ ## VALUE = true; + + VIR_GET_LIMIT_PARAMETER(VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT, swap_hard_limit) + VIR_GET_LIMIT_PARAMETER(VIR_DOMAIN_MEMORY_HARD_LIMIT, memory_hard_limit) + VIR_GET_LIMIT_PARAMETER(VIR_DOMAIN_MEMORY_SOFT_LIMIT, memory_soft_limit) + +#undef VIR_GET_LIMIT_PARAMETER + /* It will fail if hard limit greater than swap hard limit anyway */ - if (swap_hard_limit && - hard_limit && - (hard_limit->value.ul > swap_hard_limit->value.ul)) { + if (set_swap_hard_limit && set_memory_hard_limit && + (memory_hard_limit > swap_hard_limit)) { virReportError(VIR_ERR_INVALID_ARG, "%s", _("hard limit must be lower than swap hard limit")); goto cleanup; } - if (flags & VIR_DOMAIN_AFFECT_LIVE) { - /* Get current swap hard limit */ - rc = virCgroupGetMemSwapHardLimit(group, &val); - if (rc != 0) { + if (set_swap_hard_limit) { + if (flags & VIR_DOMAIN_AFFECT_LIVE && + (rc = virCgroupSetMemSwapHardLimit(group, swap_hard_limit)) < 0) { virReportSystemError(-rc, "%s", - _("unable to get swap hard limit")); + _("unable to set memory swap_hard_limit tunable")); goto cleanup; } - /* Swap hard_limit and swap_hard_limit to ensure the setting - * could succeed if both of them are provided. - */ - if (swap_hard_limit && hard_limit) { - virTypedParameter param; - - if (swap_hard_limit->value.ul > val) { - if (hard_limit_index < swap_hard_limit_index) { - param = params[hard_limit_index]; - params[hard_limit_index] = params[swap_hard_limit_index]; - params[swap_hard_limit_index] = param; - } - } else { - if (hard_limit_index > swap_hard_limit_index) { - param = params[hard_limit_index]; - params[hard_limit_index] = params[swap_hard_limit_index]; - params[swap_hard_limit_index] = param; - } - } - } + if (flags & VIR_DOMAIN_AFFECT_CONFIG) + persistentDef->mem.swap_hard_limit = swap_hard_limit; } - ret = 0; - for (i = 0; i < nparams; i++) { - virTypedParameterPtr param = &params[i]; - - if (STREQ(param->field, VIR_DOMAIN_MEMORY_HARD_LIMIT)) { - if (flags & VIR_DOMAIN_AFFECT_LIVE) { - rc = virCgroupSetMemoryHardLimit(group, param->value.ul); - if (rc != 0) { - virReportSystemError(-rc, "%s", - _("unable to set memory hard_limit tunable")); - ret = -1; - } - } + if (set_memory_hard_limit) { + if (flags & VIR_DOMAIN_AFFECT_LIVE && + (rc = virCgroupSetMemoryHardLimit(group, memory_hard_limit)) < 0) { + virReportSystemError(-rc, "%s", + _("unable to set memory hard_limit tunable")); + goto cleanup; + } - if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - persistentDef->mem.hard_limit = param->value.ul; - } - } else if (STREQ(param->field, VIR_DOMAIN_MEMORY_SOFT_LIMIT)) { - if (flags & VIR_DOMAIN_AFFECT_LIVE) { - rc = virCgroupSetMemorySoftLimit(group, param->value.ul); - if (rc != 0) { - virReportSystemError(-rc, "%s", - _("unable to set memory soft_limit tunable")); - ret = -1; - } - } + if (flags & VIR_DOMAIN_AFFECT_CONFIG) + persistentDef->mem.hard_limit = memory_hard_limit; + } - if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - persistentDef->mem.soft_limit = param->value.ul; - } - } else if (STREQ(param->field, VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT)) { - if (flags & VIR_DOMAIN_AFFECT_LIVE) { - rc = virCgroupSetMemSwapHardLimit(group, param->value.ul); - if (rc != 0) { - virReportSystemError(-rc, "%s", - _("unable to set swap_hard_limit tunable")); - ret = -1; - } - } - if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - persistentDef->mem.swap_hard_limit = param->value.ul; - } + if (set_memory_soft_limit) { + if (flags & VIR_DOMAIN_AFFECT_LIVE && + (rc = virCgroupSetMemorySoftLimit(group, memory_soft_limit)) < 0) { + virReportSystemError(-rc, "%s", + _("unable to set memory soft_limit tunable")); + goto cleanup; } - } - if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - if (virDomainSaveConfig(cfg->configDir, persistentDef) < 0) - ret = -1; + if (flags & VIR_DOMAIN_AFFECT_CONFIG) + persistentDef->mem.soft_limit = memory_soft_limit; } + if (flags & VIR_DOMAIN_AFFECT_CONFIG && + virDomainSaveConfig(cfg->configDir, persistentDef) < 0) + goto cleanup; + + ret = 0; + cleanup: virCgroupFree(&group); - if (vm) - virObjectUnlock(vm); + virObjectUnlock(vm); virObjectUnref(caps); virObjectUnref(cfg); return ret; -- 1.8.1.1

2 2

[libvirt] [PATCHv2 0/5] Add API to allow TCP connection tunelling
by Peter Krempa 25 Feb '13

25 Feb '13

This series adds ability for the qemu driver to tunnel connections to TCP ports from the host. This is useful for enabling remote VNC/SPICE sessions without the need to configure SSH tunnels or portforwards and without the need to open the ports for public. There's also an advantage for tools such as virt-viewer that have to guess the remote connection parameters and you have to hope that nothing is in your way. With spice/VNC clients that have support for read/write callbacks, this would allow also direct connection without an intermediate socket. The API and tunelling works but there's no (stable and good working) client for this API. I hacked up a dirty netcat-like terminal into virsh for testing purposes (see patch 5/5) but that isn't what I'd like to see. The client should be able to open a listening socket and when a client connects to it, it opens a stream and connects it to the remote host. For the client there are two options: 1) do all the stuff in virsh: + one tool to rule them all - i'd like to daemonize it and I don't know if that's okay in virsh 2) add a new tool "virtunnel": + less virsh pollution - separate tool ... As nobody responded, I'd like to re-ask for someones opinion on this. (note: this is my personal effort, I'm annoyed of opening ssh tunnels to remote displays on my server and I don't want to open the ports to public. ) After this it would be great to add support for this to virt-viewer. I will have a look at that later. ---- Diff to v1: - fixed error reporting in 2/5 - documented limitation to "localhost" in 3/5 - fixed possible segfault in 4/5 --- Peter Krempa (5): api: Add API to allow TCP tunneling through streams to the host fdstream: Add support for TCP connections of streams qemu: Add configuration options to enable TCP tunelling qemu: Implement virNodeTunnelTcp for the qemu driver NOT_TO_BE_APPLIED_UPSTREAM: quick and dirty virsh client to test the stuff include/libvirt/libvirt.h.in | 11 +++++++ src/driver.h | 8 +++++ src/fdstream.c | 73 ++++++++++++++++++++++++++++++++++++++++++++ src/fdstream.h | 5 +++ src/libvirt.c | 67 ++++++++++++++++++++++++++++++++++++++++ src/libvirt_private.syms | 1 + src/libvirt_public.syms | 1 + src/qemu/qemu.conf | 16 ++++++++++ src/qemu/qemu_conf.c | 26 ++++++++++++++++ src/qemu/qemu_conf.h | 13 ++++++++ src/qemu/qemu_driver.c | 48 +++++++++++++++++++++++++++++ src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 9 +++++- src/remote_protocol-structs | 6 ++++ src/rpc/gendispatch.pl | 1 + tools/console.c | 66 +++++++++++++++++++++------------------ tools/console.h | 9 ++---- tools/virsh-domain.c | 17 +++++++++-- tools/virsh-host.c | 60 ++++++++++++++++++++++++++++++++++++ 19 files changed, 397 insertions(+), 41 deletions(-) -- 1.8.0

2 7

[libvirt] [PATCH 0/2] Using client-id for DHCPv6 host identification
by Gene Czarcinski 25 Feb '13

25 Feb '13

The first patch is a trivial fix to the network schema since the name in dhcp-host is really optional. The second patch adds the capability to use the client id to improve the reliability of having a system use a fixed IPv6 address. Gene Czarcinski (2): Trivial fix: in dhcp-host the name is optional use client id for IPv6 DHCP host definition docs/formatnetwork.html.in | 18 ++++++- docs/schemas/basictypes.rng | 59 ++++++++++++++++++++++ docs/schemas/network.rng | 7 ++- src/conf/network_conf.c | 29 +++++++++-- src/conf/network_conf.h | 1 + src/network/bridge_driver.c | 3 +- src/util/virdnsmasq.c | 20 ++++++-- src/util/virdnsmasq.h | 1 + tests/networkxml2confdata/dhcp6-nat-network.xml | 5 +- tests/networkxml2confdata/dhcp6-network.xml | 5 +- .../dhcp6host-routed-network.xml | 5 +- 11 files changed, 138 insertions(+), 15 deletions(-) -- 1.8.1.2

3 11

[libvirt] Versioning/Compatibility in the XML schemas
by Pieter Hollants 25 Feb '13

25 Feb '13

Out of curiosity, seeing that we doing modifications to the XML schema all the time, there does not seem to be some sort of version identifier in the XML schemas. If I take the recently merged patch for DHCP options, for instance, suppose virt-manager would add support for it in its GUI. How would such a network XML definition be interpreted by older libvirt versions? Is it supposed to ignore elements it doesn't know or do we have an implicit requirement of "always use the latest versions together"? -- Pieter Hollants <pieter(a)hollants.com>

2 1

[libvirt] [PATCH v2 resend 0/4]use VIR_ENUM_DECL for domain NIC model and add usb-net
by Guannan Ren 25 Feb '13

25 Feb '13

v1 to v2 *removed i8* NIC models support for QEMU/KVM *updated docs *rebased This patchset uses VIR_ENUM_DECL and VIR_ENUM_IMPL macros for NIC models and changes the related codes to use them. All of NIC models supported by various hypervisors comprise of the enum, so the problem is that we need to do further checking in hypervisor-specific implementation. Fortunately, VMX and Vbox did this checking very well already. In 4/4, a similar job is performed for QEMU/KVM. And, adds usb-net support. The vendorId and productID of is 0525:a4a2. The corresponding item in usb-ids is as follows: 0525 Netchip Technology, Inc. a4a2 Linux-USB Ethernet/RNDIS Gadget In my opinion, using usb-net directly is good enough, so I keep it. Any other idea is welcome. Libvirt XML sample: <devices> <interface type='user'> <mac address='52:54:00:32:6a:91'/> <model type='usb-net'/> <alias name='net1'/> <address type='usb' bus='0' port='1'/> </interface> </devices> qemu commandline: qemu ${other_vm_args} -netdev user,id=hostnet1 \ -device usb-net,netdev=hostnet1,id=net1,\ mac=52:54:00:32:6a:91,bus=usb.0,port=1 Guannan Ren(4) [PATCH v2 resend 1/4] add domain NIC model enum macro [PATCH v2 resend 2/4] net: use virDomainNICModelType{From|To}String functions [PATCH v2 resend 3/4] qemu: add NIC model checking for qemu hypervisor [PATCH v2 resend 4/4] qemu: add usb-net support docs/formatdomain.html.in | 29 +++++++++++------------------ src/conf/domain_conf.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------ src/conf/domain_conf.h | 32 +++++++++++++++++++++++++++++++- src/libvirt_private.syms | 2 ++ src/libxl/libxl_conf.c | 5 +++-- src/parallels/parallels_driver.c | 2 +- src/qemu/qemu_command.c | 41 +++++++++++++++++++++++++++-------------- src/qemu/qemu_driver.c | 2 +- src/qemu/qemu_hotplug.c | 10 ++++++---- src/qemu/qemu_process.c | 14 +++++++------- src/vbox/vbox_tmpl.c | 57 +++++++++++++++++++++++++++------------------------------ src/vmx/vmx.c | 31 ++++++++++++++++--------------- src/xenxs/xen_sxpr.c | 21 +++++++++++---------- src/xenxs/xen_xm.c | 21 +++++++++++---------- 14 files changed, 208 insertions(+), 137 deletions(-)

1 4

[libvirt] [PATCH] interface: Fix udev backend bridge device display
by Doug Goldstein 25 Feb '13

25 Feb '13

The bridge device was showing the vnet devices created for the domains as connected to the bridge. libvirt should only show host devices when trying to get the interface definition rather than the domain devices as well. --- Honestly this method sucks. But it makes the code path work and doesn't result in brokenness. I was really thinking of sscanf() but I don't really care to store the values. Suggestions? --- src/interface/interface_backend_udev.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/src/interface/interface_backend_udev.c b/src/interface/interface_backend_udev.c index bd83545..dca85b3 100644 --- a/src/interface/interface_backend_udev.c +++ b/src/interface/interface_backend_udev.c @@ -24,7 +24,9 @@ #include <libudev.h> #include "virerror.h" +#include "c-ctype.h" #include "datatypes.h" +#include "domain_conf.h" #include "interface_driver.h" #include "interface_conf.h" #include "viralloc.h" @@ -527,6 +529,16 @@ udevIfaceBridgeScanDirFilter(const struct dirent *entry) if (STREQ(entry->d_name, ".") || STREQ(entry->d_name, "..")) return 0; + /* Omit the domain interfaces from the list of bridge attached + * devices. All we can do is check for the device name matching + * vnet%d. Improvements to this check are welcome. + */ + if (strlen(entry->d_name) >= 5) { + if (STRPREFIX(entry->d_name, VIR_NET_GENERATED_PREFIX) && + c_isdigit(entry->d_name[4])) + return 0; + } + return 1; } -- 1.7.12.4

2 1

[libvirt] [PATCH] docs: add forward mode='hostdev' example
by Laine Stump 25 Feb '13

25 Feb '13

Also rearrange examples so that all "managed" networks (those with bridges created by libvirt) are together. --- docs/formatnetwork.html.in | 52 +++++++++++++++++++++++++++++++++------------- 1 file changed, 37 insertions(+), 15 deletions(-) diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 4b4c47b..46b7270 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -332,7 +332,7 @@ </p> <pre> ... - <forward mode='passthrough'> + <forward mode='passthrough' managed='yes'> <pf dev='eth0'/> </forward> ... @@ -863,6 +863,27 @@ </ip> </network></pre> + <h3><a name="examplesNoGateway">Network config with no gateway addresses</a></h3> + + <p> + A valid network definition can contain no IPv4 or IPv6 addresses. + Such a definition can be used for a "very private" or "very + isolated" network since it will not be possible to communicate + with the virtualization host via this network. However, this + virtual network interface can be used for communication between + virtual guest systems. This works for IPv4 + and <span class="since">(Since 1.0.1)</span> IPv6. However, + the <code>ipv6</code> attribute must be set to "yes" for + functional guest-to-guest IPv6 communication. + </p> + + <pre> + <network ipv6='yes'> + <name>nogw</name> + <bridge name="virbr2" stp="on" delay="0"/> + </network> + </pre> + <h3><a name="examplesBridge">Using an existing host bridge</a></h3> <p> @@ -916,25 +937,26 @@ </forward> </network></pre> - <h3><a name="examplesNoGateway">Network config with no gateway addresses</a></h3> + <h3><a name="examplesPCIPassthrough">Assigning SR-IOV Virtual Functions via PCI Passthrough</a></h3> <p> - A valid network definition can contain no IPv4 or IPv6 addresses. Such a definition - can be used for a "very private" or "very isolated" network since it will not be - possible to communicate with the virtualization host via this network. However, - this virtual network interface can be used for communication between virtual guest - systems. This works for IPv4 and <span class="since">(Since 1.0.1)</span> IPv6. - However, the new ipv6='yes' must be added for guest-to-guest IPv6 - communication. + <span class="since">Since 0.9.10, requires a host with working + IOMMU</span> This example shows how to use a libvirt network to + assign individual SR-IOV Virtual Functions (VF) to guests using + PCI passthrough. Only the Physical Function (PF) of the SR-IOV + network adapter needs to be listed in the network definition; a + list of all VFs will be automatically derived from that, and VFs + will be allocated to guest domains as requested. </p> <pre> - <network ipv6='yes'> - <name>nogw</name> - <uuid>7a3b7497-1ec7-8aef-6d5c-38dff9109e93</uuid> - <bridge name="virbr2" stp="on" delay="0" /> - <mac address='00:16:3E:5D:C7:9E'/> - </network></pre> + <network> + <name>passthrough</name> + <forward mode='hostdev' managed='yes'> + <pf dev='eth3'/> + </forward> + </network> + </pre> </body> </html> -- 1.7.11.7

1 0

[libvirt] [PATCH] virsh: add --start option to the define command
by Doug Goldstein 25 Feb '13

25 Feb '13

Adds the --start option to the define command to simplify the often used case of virsh "define dom.xml; start dom" or virsh define dom.xml && virsh start dom. This is just a rebased version of: https://www.redhat.com/archives/libvir-list/2013-January/msg00490.html There's a competing patchset available at: https://www.redhat.com/archives/libvir-list/2013-February/msg01298.html --- tools/virsh-domain.c | 23 +++++++++++++++++++++-- tools/virsh.pod | 5 +++-- 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c index 96dd4fa..6d62197 100644 --- a/tools/virsh-domain.c +++ b/tools/virsh-domain.c @@ -6602,6 +6602,10 @@ static const vshCmdOptDef opts_define[] = { .flags = VSH_OFLAG_REQ, .help = N_("file containing an XML domain description") }, + {.name = "start", + .type = VSH_OT_BOOL, + .help = N("start the domain after definition") + }, {.name = NULL} }; @@ -6612,6 +6616,7 @@ cmdDefine(vshControl *ctl, const vshCmd *cmd) const char *from = NULL; bool ret = true; char *buffer; + bool start = false; if (vshCommandOptStringReq(ctl, cmd, "file", &from) < 0) return false; @@ -6619,17 +6624,31 @@ cmdDefine(vshControl *ctl, const vshCmd *cmd) if (virFileReadAll(from, VSH_MAX_XML_FILE, &buffer) < 0) return false; + start = vshCommandOptBool(cmd, "start"); + dom = virDomainDefineXML(ctl->conn, buffer); VIR_FREE(buffer); if (dom != NULL) { vshPrint(ctl, _("Domain %s defined from %s\n"), virDomainGetName(dom), from); - virDomainFree(dom); } else { vshError(ctl, _("Failed to define domain from %s"), from); - ret = false; + return false; } + + /* Start the domain if the user requested it and it was defined */ + if (start) { + if (virDomainCreate(dom) < 0) { + vshError(ctl, _("Failed to start domain %s, which was " + "successfully defined."), virDomainGetName(dom)); + ret = false; + } else { + vshPrint(ctl, _("Domain %s started\n"), virDomainGetName(dom)); + } + } + + virDomainFree(dom); return ret; } diff --git a/tools/virsh.pod b/tools/virsh.pod index a5d8fe6..660331c 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -555,11 +555,12 @@ B<Example> vi domain.xml (or make changes with your other text editor) virsh create domain.xml -=item B<define> I<FILE> +=item B<define> I<FILE> [I<--start>] Define a domain from an XML <file>. The domain definition is registered but not started. If domain is already running, the changes will take -effect on the next boot. +effect on the next boot. If I<--start> is requested, start the domain +after defining it. =item B<desc> I<domain> [[I<--live>] [I<--config>] | [I<--current>]] [I<--title>] [I<--edit>] [I<--new-desc> -- 1.7.12.4

1 0

[libvirt] [PATCH 0/5] storage: add tests for qemu-img command line
by Ján Tomko 24 Feb '13

24 Feb '13

This series adds tests to check for changes in the generated qemu-img command line and moves the options in front of positional arguments. Ján Tomko (5): storage: move flag setting after declarations storage: separate qemu-img command generation and execution storage: add test for qemu-img command line generation storage: move qemu-img options before positional arguments storage: qemu-img: change INFO to DEBUG src/storage/storage_backend.c | 131 ++++++++------ src/storage/storage_backend.h | 8 + tests/Makefile.am | 9 + tests/storagevolxml2argvdata/pool-dir.xml | 18 ++ tests/storagevolxml2argvdata/qcow2-flag.argv | 1 + .../qcow2-nobacking-convert-flag.argv | 1 + .../qcow2-nobacking-convert-none.argv | 1 + .../qcow2-nobacking-convert-prealloc.argv | 1 + .../qcow2-nobacking-flag.argv | 1 + .../qcow2-nobacking-none.argv | 1 + .../qcow2-nobacking-prealloc.argv | 1 + tests/storagevolxml2argvdata/qcow2-none.argv | 1 + tests/storagevolxml2argvdata/qcow2.argv | 1 + tests/storagevolxml2argvdata/vol-file.xml | 20 +++ .../storagevolxml2argvdata/vol-qcow2-nobacking.xml | 21 +++ tests/storagevolxml2argvdata/vol-qcow2.xml | 31 ++++ tests/storagevolxml2argvtest.c | 189 +++++++++++++++++++++ 17 files changed, 380 insertions(+), 56 deletions(-) create mode 100644 tests/storagevolxml2argvdata/pool-dir.xml create mode 100644 tests/storagevolxml2argvdata/qcow2-flag.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-nobacking-convert-flag.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-nobacking-convert-none.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-nobacking-convert-prealloc.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-nobacking-flag.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-nobacking-none.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-nobacking-prealloc.argv create mode 100644 tests/storagevolxml2argvdata/qcow2-none.argv create mode 100644 tests/storagevolxml2argvdata/qcow2.argv create mode 100644 tests/storagevolxml2argvdata/vol-file.xml create mode 100644 tests/storagevolxml2argvdata/vol-qcow2-nobacking.xml create mode 100644 tests/storagevolxml2argvdata/vol-qcow2.xml create mode 100644 tests/storagevolxml2argvtest.c -- 1.7.12.4

2 11

[libvirt] [PATCH 0/2] Support PCI passthrough in libxl driver
by Chunyan Liu 24 Feb '13

24 Feb '13

This patch series is to add PCI passthrough support to libxenlight driver so that it can create VM with managed/non-managed host pci device defined. Chunyan Liu (2): libxl: add APIs to prepare/release host pci device libxl: support pci passthrough po/POTFILES.in | 1 + src/Makefile.am | 1 + src/libxl/libxl_conf.c | 44 ++++ src/libxl/libxl_conf.h | 5 +- src/libxl/libxl_driver.c | 16 ++ src/libxl/libxl_hostdev.c | 600 +++++++++++++++++++++++++++++++++++++++++++++ src/libxl/libxl_hostdev.h | 44 ++++ 7 files changed, 710 insertions(+), 1 deletions(-) create mode 100644 src/libxl/libxl_hostdev.c create mode 100644 src/libxl/libxl_hostdev.h -- 1.7.3.4

6 7

[libvirt] [PATCH] run: license as LGPL
by Eric Blake 23 Feb '13

23 Feb '13

It makes no sense to prohibit reuse of the wrapper in other LGPL projects, since most of libvirt is designed to be LGPL. Of course, when using the wrapper to wrap a GPL program, the combined result is still effectively GPL, but that shouldn't force us to license the wrapper as GPL in isolation. * run.in: Relicense to LGPLv2+. --- Any objections to this? run.in | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/run.in b/run.in index 5063522..5d4a04c 100644 --- a/run.in +++ b/run.in @@ -2,18 +2,19 @@ # libvirt 'run' programs locally script # Copyright (C) 2012-2013 Red Hat, Inc. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. # -# This program is distributed in the hope that it will be useful, +# This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU General Public License -# along with this program; If not, see <http://www.gnu.org/licenses/>. +# You should have received a copy of the GNU Lesser General Public +# License along with this library; If not, see +# <http://www.gnu.org/licenses/>. #---------------------------------------------------------------------- # -- 1.8.1.2

2 3

[libvirt] [PATCH v4 0/9] Rework storage migration
by Michal Privoznik 23 Feb '13

23 Feb '13

Since there are many hidden problems with auto-creating storage for the domain in here, as previous rounds of reviewing the series has shown, I've decided to not do anything about it for now and the auto allocation is dropped completely. So we are back to the assumption we already have - users need to make sure files already exists and have the right size. Hawk. diff to v1: -Eric's and Daniel's suggestions worked in. To point out the bigger ones: don't do NBD style when TUNNELLED requested, added 'b:writable' to 'nbd-server-add' -drop '/qemu-migration/nbd/disk/@src' attribute from migration cookie. As pointed out by Jirka, disk->src can be changed during migration (e.g. by migration hook or by passed xml). So I've tried (as suggested on the list) passing disk alias. However, since qemu hasn't been started on destination yet, the aliases hasn't been generated yet. So we have to rely on ordering completely. diff to v2: -rebase to reflect changes made by offline migration patch -send initial nbd cookie only if needed diff to v2.1: -nbd cookie reworked -don't rely on disk ordering in the cookie, but use disk target for that -adapt to virPortAllocator -unlink pre-created storage on migration fail -other of Jirka's suggestions worked in "diff" to v3: -just rebase & adapt to new qemu code after dropping QDL (Qemu Driver Lock) diff to v4: -drop storage auto-allocation -include John's and Jirka's reviews Note, that most of the patches has been ACKed already. Michal Privoznik (9): qemu: Introduce NBD_SERVER capability Introduce NBD migration cookie qemu: Introduce nbd-server-start command qemu: Introduce nbd-server-add command qemu: Introduce nbd-server-stop command qemu_migration: Introduce qemuMigrationStartNBDServer() qemu_migration: Introduce qemuMigrationDriveMirror qemu_migration: Stop NBD server at Finish phase qemu_migration: Cancel running jobs on failed migration src/qemu/qemu_capabilities.c | 4 +- src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_domain.h | 1 + src/qemu/qemu_migration.c | 458 +++++++++++++++++++++++++++++++++++++++++-- src/qemu/qemu_monitor.c | 63 ++++++ src/qemu/qemu_monitor.h | 7 + src/qemu/qemu_monitor_json.c | 102 ++++++++++ src/qemu/qemu_monitor_json.h | 7 + src/qemu/qemu_process.c | 5 + 9 files changed, 631 insertions(+), 17 deletions(-) -- 1.8.1.2

3 21

[libvirt] [PATCH] run: use portable shell
by Eric Blake 23 Feb '13

23 Feb '13

Nothing in run required bash, except for the shebang. On systems where /bin/bash doesn't exist (I hit it on FreeBSD), using /bin/sh instead fixes a 'make check' failure: gmake[3]: Entering directory `/usr/home/dummy/libvirt/python' GEN check-local /usr/local/bin/bash: ../run: /bin/bash: bad interpreter: No such file or directory * run.in: Use /bin/sh, not bash. --- Pushing under the build-breaker rule. run.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/run.in b/run.in index 845eef5..5063522 100644 --- a/run.in +++ b/run.in @@ -1,6 +1,6 @@ -#!/bin/bash - +#!/bin/sh # libvirt 'run' programs locally script -# Copyright (C) 2012 Red Hat, Inc. +# Copyright (C) 2012-2013 Red Hat, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -- 1.8.1.2

1 0

[libvirt] [PATCH] storage: use f_frsize, not f_bsize, for calculating available space
by Sage Weil 23 Feb '13

23 Feb '13

The bfree and blocks fields are supposed to be in units of frsize. We were calculating capacity correctly using those units, but the available calculation was using bsize instead. Most file systems report these as the same value specifically because many programs are buggy, but that is no reason to rely on that behavior, or to behave inconsistently. This bug has been present since e266ded (2008) and aa296e6c, when the code was originally introduced (the latter via cut and paste). Signed-off-by: Sage Weil <sage(a)newdream.net> --- src/parallels/parallels_storage.c | 2 +- src/storage/storage_backend_fs.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/parallels/parallels_storage.c b/src/parallels/parallels_storage.c index 1186296..f696fcb 100644 --- a/src/parallels/parallels_storage.c +++ b/src/parallels/parallels_storage.c @@ -709,7 +709,7 @@ parallelsStoragePoolGetAlloc(virStoragePoolDefPtr def) def->capacity = ((unsigned long long)sb.f_frsize * (unsigned long long)sb.f_blocks); def->available = ((unsigned long long)sb.f_bfree * - (unsigned long long)sb.f_bsize); + (unsigned long long)sb.f_frsize); def->allocation = def->capacity - def->available; return 0; diff --git a/src/storage/storage_backend_fs.c b/src/storage/storage_backend_fs.c index a582804..c1684f7 100644 --- a/src/storage/storage_backend_fs.c +++ b/src/storage/storage_backend_fs.c @@ -910,7 +910,7 @@ virStorageBackendFileSystemRefresh(virConnectPtr conn ATTRIBUTE_UNUSED, pool->def->capacity = ((unsigned long long)sb.f_frsize * (unsigned long long)sb.f_blocks); pool->def->available = ((unsigned long long)sb.f_bfree * - (unsigned long long)sb.f_bsize); + (unsigned long long)sb.f_frsize); pool->def->allocation = pool->def->capacity - pool->def->available; return 0; -- 1.7.2.5

2 1

[libvirt] [PATCH] maint: check all symfiles for sorting
by Eric Blake 23 Feb '13

23 Feb '13

On FreeBSD, I got a 'make check' failure: GEN check-symsorting Symbol block at ./libvirt_atomic.syms:4: viratomic.h not found * src/Makefile.am (SYM_FILES): New define. (check-symsorting): Check on all symfiles, even when not used. * src/libvirt_atomic.syms: Fix offender. --- Pushing under the build-breaker rule. src/Makefile.am | 23 ++++++++++++++++++++++- src/libvirt_atomic.syms | 2 +- 2 files changed, 23 insertions(+), 2 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index 3ef9a9c..c1659a4 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -389,7 +389,7 @@ check-symfile: endif check-symsorting: $(AM_V_GEN)$(PERL) $(srcdir)/check-symsorting.pl \ - $(srcdir) $(USED_SYM_FILES) + $(srcdir) $(SYM_FILES) EXTRA_DIST += check-symfile.pl check-symsorting.pl PROTOCOL_STRUCTS = \ @@ -809,6 +809,7 @@ libvirt_driver_la_CFLAGS = \ libvirt_driver_la_LIBADD = \ $(NUMACTL_LIBS) $(GNUTLS_LIBS) $(CURL_LIBS) $(DLOPEN_LIBS) +SYM_FILES = $(USED_SYM_FILES) USED_SYM_FILES = $(srcdir)/libvirt_private.syms if WITH_TEST @@ -1410,42 +1411,62 @@ check-augeas-lockd: test_libvirt_lockd.aug if WITH_DRIVER_MODULES USED_SYM_FILES += $(srcdir)/libvirt_driver_modules.syms +else +SYM_FILES += $(srcdir)/libvirt_driver_modules.syms endif if WITH_LINUX USED_SYM_FILES += $(srcdir)/libvirt_linux.syms +else +SYM_FILES += $(srcdir)/libvirt_linux.syms endif if WITH_ESX USED_SYM_FILES += $(srcdir)/libvirt_esx.syms +else +SYM_FILES += $(srcdir)/libvirt_esx.syms endif if WITH_LIBVIRTD USED_SYM_FILES += $(srcdir)/libvirt_daemon.syms +else +SYM_FILES += $(srcdir)/libvirt_daemon.syms endif if WITH_OPENVZ USED_SYM_FILES += $(srcdir)/libvirt_openvz.syms +else +SYM_FILES += $(srcdir)/libvirt_openvz.syms endif if WITH_VMX USED_SYM_FILES += $(srcdir)/libvirt_vmx.syms +else +SYM_FILES += $(srcdir)/libvirt_vmx.syms endif if WITH_XENXS USED_SYM_FILES += $(srcdir)/libvirt_xenxs.syms +else +SYM_FILES += $(srcdir)/libvirt_xenxs.syms endif if WITH_SASL USED_SYM_FILES += $(srcdir)/libvirt_sasl.syms +else +SYM_FILES += $(srcdir)/libvirt_sasl.syms endif if WITH_SSH2 USED_SYM_FILES += $(srcdir)/libvirt_libssh2.syms +else +SYM_FILES += $(srcdir)/libvirt_libssh2.syms endif if WITH_ATOMIC_OPS_PTHREAD USED_SYM_FILES += $(srcdir)/libvirt_atomic.syms +else +SYM_FILES += $(srcdir)/libvirt_atomic.syms endif EXTRA_DIST += \ diff --git a/src/libvirt_atomic.syms b/src/libvirt_atomic.syms index db80ce8..e2c2363 100644 --- a/src/libvirt_atomic.syms +++ b/src/libvirt_atomic.syms @@ -2,7 +2,7 @@ # These symbols are dependent upon !VIR_ATOMIC_OPS_GCC. # -# viratomic.h +# util/viratomic.h virAtomicLock; # Let emacs know we want case-insensitive sorting -- 1.8.1.2

1 0

[libvirt] [RFC PATCH 1/4] libvirt: add VIR_DOMAIN_START_PERSISTENT flag
by Doug Goldstein 22 Feb '13

22 Feb '13

Added a VIR_DOMAIN_START_PERSISTENT flag for virDomainCreateXML() so that the guest remains defined after it is destroyed. The result of using this flag is equivilent to calling virDomainDefineXML() followed by virDomainCreate() or virDomainCreateWithFlags(). --- Not sure if this is the correct place to add "Since 1.0.3 (likely 1.0.4)" --- include/libvirt/libvirt.h.in | 1 + src/libvirt.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index ad30cd0..e119215 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -336,6 +336,7 @@ typedef enum { VIR_DOMAIN_START_AUTODESTROY = 1 << 1, /* Automatically kill guest when virConnectPtr is closed */ VIR_DOMAIN_START_BYPASS_CACHE = 1 << 2, /* Avoid file system cache pollution */ VIR_DOMAIN_START_FORCE_BOOT = 1 << 3, /* Boot, discarding any managed save */ + VIR_DOMAIN_START_PERSISTENT = 1 << 4, /* Define guest to exist after it is destroyed */ } virDomainCreateFlags; diff --git a/src/libvirt.c b/src/libvirt.c index 1e78500..abe59cd 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -1951,6 +1951,10 @@ virDomainGetConnect(virDomainPtr dom) * is destroyed, or if the host is restarted (see virDomainDefineXML() to * define persistent domains). * + * If the VIR_DOMAIN_START_PERSISTENT flag is set, the guest domain + * will remain defined even after the guest is destroyed. This is + * similar to if you had called virDomainDefineXML() and virDomainCreate(). + * * If the VIR_DOMAIN_START_PAUSED flag is set, the guest domain * will be started, but its CPUs will remain paused. The CPUs * can later be manually started using virDomainResume. -- 1.7.12.4

2 6

[libvirt] [PATCH] Add support for qxl.revision in domain XML
by Christophe Fergeau 22 Feb '13

22 Feb '13

QXL devices have an associated 'revision' which is raised when new features have been introduced which would break migration to older versions. This commit makes it possible to set this revision as QEMU sometimes support newer QXL revisions than what it defaults to. --- docs/formatdomain.html.in | 5 ++++- docs/schemas/domaincommon.rng | 5 +++++ src/conf/domain_conf.c | 17 +++++++++++++++++ src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 8 ++++++++ .../qemuxml2argv-graphics-spice-compression.args | 3 ++- .../qemuxml2argv-graphics-spice-compression.xml | 4 ++-- .../qemuxml2argv-graphics-spice-qxl-vga.args | 3 ++- .../qemuxml2argv-graphics-spice-qxl-vga.xml | 4 ++-- tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args | 3 ++- tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml | 4 ++-- 11 files changed, 47 insertions(+), 10 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 7ad8aea..4b269c8 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -3569,7 +3569,10 @@ qemu-kvm -net nic,model=? /dev/null attribute <code>ram</code> (<span class="since">since 1.0.2</span>) is allowed for "qxl" type only and specifies the size of the primary bar, while <code>vram</code> specifies the - secondary bar size. If "ram" is not supplied a default value is used. + secondary bar size. If "ram" or "vram" are not supplied a default + value is used. The optional attribute <code>revision</code> (<span + class="since">since 1.0.3</span>) specifies the revision of + the QXL device, newer revisions provides more functionality. </dd> <dt><code>model</code></dt> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 049f232..fc78e2d 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -2280,6 +2280,11 @@ <ref name="unsignedInt"/> </attribute> </optional> + <optional> + <attribute name="revision"> + <ref name="unsignedInt"/> + </attribute> + </optional> </group> </choice> <optional> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 5782abb..83be711 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -7391,6 +7391,7 @@ virDomainVideoDefParseXML(const xmlNodePtr node, char *vram = NULL; char *ram = NULL; char *primary = NULL; + char *revision = NULL; if (VIR_ALLOC(def) < 0) { virReportOOMError(); @@ -7406,6 +7407,7 @@ virDomainVideoDefParseXML(const xmlNodePtr node, ram = virXMLPropString(cur, "ram"); vram = virXMLPropString(cur, "vram"); heads = virXMLPropString(cur, "heads"); + revision = virXMLPropString(cur, "revision"); if ((primary = virXMLPropString(cur, "primary")) != NULL) if (STREQ(primary, "yes")) @@ -7456,6 +7458,19 @@ virDomainVideoDefParseXML(const xmlNodePtr node, def->vram = virDomainVideoDefaultRAM(dom, def->type); } + if (revision) { + if (def->type != VIR_DOMAIN_VIDEO_TYPE_QXL) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("revision attribute only supported for type of qxl")); + goto error; + } + if (virStrToLong_ui(revision, NULL, 10, &def->revision) < 0) { + virReportError(VIR_ERR_XML_ERROR, + _("cannot parse video revision '%s'"), revision); + goto error; + } + } + if (heads) { if (virStrToLong_ui(heads, NULL, 10, &def->heads) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, @@ -13406,6 +13421,8 @@ virDomainVideoDefFormat(virBufferPtr buf, virBufferAsprintf(buf, " heads='%u'", def->heads); if (def->primary) virBufferAddLit(buf, " primary='yes'"); + if (def->revision) + virBufferAsprintf(buf, " revision='%u'", def->revision); if (def->accel) { virBufferAddLit(buf, ">\n"); virDomainVideoAccelDefFormat(buf, def->accel); diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 9a9e0b1..81925b1 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -1160,6 +1160,7 @@ struct _virDomainVideoDef { unsigned int ram; /* kibibytes (multiples of 1024) */ unsigned int vram; /* kibibytes (multiples of 1024) */ unsigned int heads; + unsigned int revision; bool primary; virDomainVideoAccelDefPtr accel; virDomainDeviceInfo info; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index f6273c1..e45c808 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -3598,6 +3598,9 @@ qemuBuildDeviceVideoStr(virDomainVideoDefPtr video, /* QEMU accepts bytes for vram_size. */ virBufferAsprintf(&buf, ",vram_size=%u", video->vram * 1024); + + if (video->revision != 0) + virBufferAsprintf(&buf, ",revision=%u", video->revision); } if (qemuBuildDeviceAddressStr(&buf, &video->info, caps) < 0) @@ -6631,6 +6634,11 @@ qemuBuildCommandLine(virConnectPtr conn, virCommandAddArgFormat(cmd, "%s.vram_size=%u", dev, vram * 1024); } + if (def->videos[0]->revision) { + virCommandAddArg(cmd, "-global"); + virCommandAddArgFormat(cmd, "%s.revision=%u", + dev, def->videos[0]->revision); + } } } diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.args b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.args index 59f064b..05f5579 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.args @@ -7,5 +7,6 @@ image-compression=auto_glz,jpeg-wan-compression=auto,\ zlib-glz-wan-compression=auto,\ playback-compression=on,streaming-video=filter -vga \ qxl -global qxl.ram_size=67108864 -global qxl.vram_size=18874368 \ --device qxl,id=video1,ram_size=67108864,vram_size=33554432,bus=pci.0,addr=0x4 \ +-global qxl.revision=4 \ +-device qxl,id=video1,ram_size=67108864,vram_size=33554432,revision=4,bus=pci.0,addr=0x4 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.xml b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.xml index a8c4ad8..2dc5776 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-compression.xml @@ -31,10 +31,10 @@ <streaming mode='filter'/> </graphics> <video> - <model type='qxl' ram='65536' vram='18432' heads='1'/> + <model type='qxl' ram='65536' vram='18432' heads='1' revision='4'/> </video> <video> - <model type='qxl' ram='65536' vram='32768' heads='1'/> + <model type='qxl' ram='65536' vram='32768' heads='1' revision='4'/> </video> <memballoon model='virtio'/> </devices> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.args b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.args index ef499e6..0b08038 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.args @@ -4,5 +4,6 @@ unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb -hda \ /dev/HostVG/QEMUGuest1 -spice port=5903,tls-port=5904,addr=127.0.0.1,\ x509-dir=/etc/pki/libvirt-spice,tls-channel=main,plaintext-channel=inputs -vga \ qxl -global qxl-vga.ram_size=67108864 -global qxl-vga.vram_size=33554432 \ --device qxl,id=video1,ram_size=67108864,vram_size=67108864,bus=pci.0,addr=0x4 \ +-global qxl-vga.revision=4 \ +-device qxl,id=video1,ram_size=67108864,vram_size=67108864,revision=4,bus=pci.0,addr=0x4 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.xml b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.xml index 563d371..3cd0c42 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.xml @@ -28,10 +28,10 @@ <channel name='inputs' mode='insecure'/> </graphics> <video> - <model type='qxl' ram='65536' vram='32768' heads='1'/> + <model type='qxl' ram='65536' vram='32768' heads='1' revision='4'/> </video> <video> - <model type='qxl' ram='65536' vram='65536' heads='1'/> + <model type='qxl' ram='65536' vram='65536' heads='1' revision='4'/> </video> <memballoon model='virtio'/> </devices> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args index d7cfae0..082eaf7 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args @@ -6,5 +6,6 @@ x509-dir=/etc/pki/libvirt-spice,tls-channel=default,tls-channel=main,plaintext-c image-compression=auto_glz,jpeg-wan-compression=auto,zlib-glz-wan-compression=auto,\ playback-compression=on,streaming-video=filter,disable-copy-paste -vga \ qxl -global qxl.ram_size=67108864 -global qxl.vram_size=18874368 \ --device qxl,id=video1,ram_size=67108864,vram_size=33554432,bus=pci.0,addr=0x4 \ +-global qxl.revision=4 \ +-device qxl,id=video1,ram_size=67108864,vram_size=33554432,revision=4,bus=pci.0,addr=0x4 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml index 9a36660..e99dbc8 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml @@ -34,10 +34,10 @@ <clipboard copypaste='no'/> </graphics> <video> - <model type='qxl' ram='65536' vram='18432' heads='1'/> + <model type='qxl' ram='65536' vram='18432' heads='1' revision='4'/> </video> <video> - <model type='qxl' ram='65536' vram='32768' heads='1'/> + <model type='qxl' ram='65536' vram='32768' heads='1' revision='4'/> </video> <memballoon model='virtio'/> </devices> -- 1.8.1

3 6

[libvirt] [PATCHv2] storage: fix uid_t|gid_t handling on 32 bit Linux
by Philipp Hahn 22 Feb '13

22 Feb '13

uid_t and gid_t are opaque types, ranging from s32 to u32 to u64. Unfortunately libvirt uses the value -1 to mean "current process", which on Linux32 gets converted to UINT_MAX := +(2^32-1) = 4294967295. Different libvirt versions used different formatting in the past, which break one or the other parsing function: virXPathLong(): (signed long)-1 != (double)UINT_MAX virXPathULong(): (unsigned long)-1 != (double)-1 Roll our own version of virXPathULong(), which also accepts -1, which is silently converted to UINT_MAX. For output: do the reverse and print -1 instead of UINT_MAX. Allow -1 for owner and group in schema for storage volumes. Change UINT_MAX in one test case to -1 to follow the changes from above. Signed-off-by: Philipp Hahn <hahn(a)univention.de> --- [v2] - change schema for storage volume to accept -1 for owner and group - Use UINT_MAX instead of ALLONE - Windows64 uses s64, mention s16 and u16 as well - Fix Sheepdog test case to use -1 instead of UINT_MAX --- docs/schemas/storagevol.rng | 10 +++- src/conf/storage_conf.c | 76 ++++++++++++++++++++++----- tests/storagevolxml2xmlout/vol-sheepdog.xml | 4 +- 3 files changed, 72 insertions(+), 18 deletions(-) diff --git a/docs/schemas/storagevol.rng b/docs/schemas/storagevol.rng index d4a29c7..ba95c55 100644 --- a/docs/schemas/storagevol.rng +++ b/docs/schemas/storagevol.rng @@ -49,10 +49,16 @@ <ref name='octalMode'/> </element> <element name='owner'> - <ref name='unsignedInt'/> + <choice> + <ref name='unsignedInt'/> + <value>-1</value> + </choice> </element> <element name='group'> - <ref name='unsignedInt'/> + <choice> + <ref name='unsignedInt'/> + <value>-1</value> + </choice> </element> <optional> <element name='label'> diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c index 9134a22..617b19f 100644 --- a/src/conf/storage_conf.c +++ b/src/conf/storage_conf.c @@ -659,13 +659,14 @@ cleanup: return ret; } + static int virStorageDefParsePerms(xmlXPathContextPtr ctxt, virStoragePermsPtr perms, const char *permxpath, int defaultmode) { char *mode; - long v; + double d; int ret = -1; xmlNodePtr relnode; xmlNodePtr node; @@ -699,26 +700,58 @@ virStorageDefParsePerms(xmlXPathContextPtr ctxt, VIR_FREE(mode); } + /* uid_t and gid_t are *opaque* types: on Linux they're u32, on Windows64 + * they're s64, on Solaris they were s32 in the past, and u16 and s16 have + * been used as well. + * + * Unfortunately libvirt uses the value -1 to mean "current process", which + * on Linux32 gets converted to UINT_MAX := +(2^32-1). + * + * Different libvirt versions used different formatting in the past, which + * break one or the other parsing function: + * virXPathLong(): (signed long)-1 != (double)UINT_MAX + * virXPathULong(): (unsigned long)-1 != (double)-1 + */ if (virXPathNode("./owner", ctxt) == NULL) { perms->uid = (uid_t) -1; } else { - if (virXPathLong("number(./owner)", ctxt, &v) < 0) { + ret = virXPathNumber("number(./owner)", ctxt, &d); + if (ret == 0) { + if (d == (double) -1) { + perms->uid = (uid_t) -1; + } else { + perms->uid = (uid_t) (unsigned long) d; + if (perms->uid != d) { + ret = -2; + } + } + } + if (ret < 0) { virReportError(VIR_ERR_XML_ERROR, "%s", _("malformed owner element")); goto error; } - perms->uid = (int)v; } if (virXPathNode("./group", ctxt) == NULL) { perms->gid = (gid_t) -1; } else { - if (virXPathLong("number(./group)", ctxt, &v) < 0) { + ret = virXPathNumber("number(./group)", ctxt, &d); + if (ret == 0) { + if (d == (double) -1) { + perms->gid = (gid_t)-1; + } else { + perms->gid = (gid_t) (unsigned long) d; + if (perms->gid != d) { + ret = -2; + } + } + } + if (ret < 0) { virReportError(VIR_ERR_XML_ERROR, "%s", _("malformed group element")); goto error; } - perms->gid = (int)v; } /* NB, we're ignoring missing labels here - they'll simply inherit */ @@ -1060,10 +1093,18 @@ virStoragePoolDefFormat(virStoragePoolDefPtr def) { virBufferAddLit(&buf," <permissions>\n"); virBufferAsprintf(&buf," <mode>0%o</mode>\n", def->target.perms.mode); - virBufferAsprintf(&buf," <owner>%d</owner>\n", - (int) def->target.perms.uid); - virBufferAsprintf(&buf," <group>%d</group>\n", - (int) def->target.perms.gid); + if (def->target.perms.uid == (uid_t) -1) { + virBufferAddLit(&buf, " <owner>-1</owner>\n"); + } else { + virBufferAsprintf(&buf, " <owner>%u</owner>\n", + (unsigned int) def->target.perms.uid); + } + if (def->target.perms.gid == (gid_t) -1) { + virBufferAddLit(&buf, " <group>-1</group>\n"); + } else { + virBufferAsprintf(&buf, " <group>%u</group>\n", + (unsigned int) def->target.perms.gid); + } if (def->target.perms.label) virBufferAsprintf(&buf," <label>%s</label>\n", @@ -1313,11 +1354,18 @@ virStorageVolTargetDefFormat(virStorageVolOptionsPtr options, virBufferAddLit(buf," <permissions>\n"); virBufferAsprintf(buf," <mode>0%o</mode>\n", def->perms.mode); - virBufferAsprintf(buf," <owner>%u</owner>\n", - (unsigned int) def->perms.uid); - virBufferAsprintf(buf," <group>%u</group>\n", - (unsigned int) def->perms.gid); - + if (def->perms.uid == (uid_t) -1) { + virBufferAddLit(buf, " <owner>-1</owner>\n"); + } else { + virBufferAsprintf(buf, " <owner>%u</owner>\n", + (unsigned int) def->perms.uid); + } + if (def->perms.gid == (gid_t) -1) { + virBufferAddLit(buf, " <group>-1</group>\n"); + } else { + virBufferAsprintf(buf, " <group>%u</group>\n", + (unsigned int) def->perms.gid); + } if (def->perms.label) virBufferAsprintf(buf," <label>%s</label>\n", diff --git a/tests/storagevolxml2xmlout/vol-sheepdog.xml b/tests/storagevolxml2xmlout/vol-sheepdog.xml index 2f19af8..fc04f19 100644 --- a/tests/storagevolxml2xmlout/vol-sheepdog.xml +++ b/tests/storagevolxml2xmlout/vol-sheepdog.xml @@ -10,8 +10,8 @@ <format type='unknown'/> <permissions> <mode>0600</mode> - <owner>4294967295</owner> - <group>4294967295</group> + <owner>-1</owner> + <group>-1</group> </permissions> </target> </volume> -- 1.7.10.4

1 0

[libvirt] [PATCH 00/14] Add support for XBZRLE migration compression
by Jiri Denemark 22 Feb '13

22 Feb '13

QEMU supports XBZRLE compression of repeatedly transferred pages during live migration and this series makes it usable through libvirt. The first two patches add support for VIR_MIGRATE_COMPRESSED flag that enables XBZRLE compression. Patches 3--9 add an enhanced and extensible version of virDomainGetJobInfo and make various migration statistics available through it. The rest of the patches (10--14) add APIs for querying and changing XBZRLE compression cache size. Jiri Denemark (14): Introduce VIR_MIGRATE_COMPRESSED flag qemu: Add support for compressed migration Introduce virDomainGetJobStats API python: Implement virDomainGetJobStats wrapper remote: Auto-allocate params in remoteDeserializeTypedParameters remote: Implement virDomainGetJobStats virsh: Use virDomainGetJobStats in domjobinfo if available qemu: Parse more fields from query-migrate QMP command qemu: Implement virDomainGetJobStats Introduce virDomainMigrate*CompressionCache APIs python: Implement virDomainMigrateGetCompressionCache wrapper remote: Implement virDomainMigrate*CompressionCache virsh: Add migrate-compcache command qemu: Implement virDomainMigrate*CompressionCache daemon/remote.c | 44 ++++++ include/libvirt/libvirt.h.in | 213 ++++++++++++++++++++++++++ python/generator.py | 2 + python/libvirt-override-api.xml | 13 ++ python/libvirt-override.c | 70 +++++++++ src/driver.h | 18 +++ src/libvirt.c | 158 +++++++++++++++++++ src/libvirt_public.syms | 3 + src/qemu/qemu_domain.c | 1 + src/qemu/qemu_domain.h | 3 +- src/qemu/qemu_driver.c | 235 ++++++++++++++++++++++++++++ src/qemu/qemu_migration.c | 103 ++++++++++--- src/qemu/qemu_migration.h | 3 +- src/qemu/qemu_monitor.c | 101 ++++++++++-- src/qemu/qemu_monitor.h | 52 ++++++- src/qemu/qemu_monitor_json.c | 331 ++++++++++++++++++++++++++++++++++------ src/qemu/qemu_monitor_json.h | 15 +- src/qemu/qemu_monitor_text.c | 47 +++--- src/qemu/qemu_monitor_text.h | 5 +- src/remote/remote_driver.c | 138 ++++++++++++----- src/remote/remote_protocol.x | 31 +++- src/remote_protocol-structs | 26 ++++ src/rpc/gendispatch.pl | 2 +- tools/virsh-domain.c | 291 +++++++++++++++++++++++++++++------ tools/virsh.pod | 18 ++- 25 files changed, 1718 insertions(+), 205 deletions(-) -- 1.8.1.2

4 36

[libvirt] [PATCH] qemu: only release SPICE TLS port if it has been allocated
by Ján Tomko 22 Feb '13

22 Feb '13

Silence the error message that happens during shutdown of a domain with spice graphics, autoport enabled if spice_tls is disabled in qemu.conf: error : virPortAllocatorRelease:174 : port 0 must be in range (5900, 65534) --- src/qemu/qemu_process.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index b560d2e..1e2bcae 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4321,8 +4321,10 @@ retry: graphics->data.spice.autoport) { ignore_value(virPortAllocatorRelease(driver->remotePorts, graphics->data.spice.port)); - ignore_value(virPortAllocatorRelease(driver->remotePorts, - graphics->data.spice.tlsPort)); + if (cfg->spiceTLS) { + ignore_value(virPortAllocatorRelease(driver->remotePorts, + graphics->data.spice.tlsPort)); + } } } -- 1.7.12.4

2 1

[libvirt] Libvirt java build problems
by Daniel P. Berrange 22 Feb '13

22 Feb '13

The Fedora build of libvirt-java is currently broken with a strange error: http://kojipkgs.fedoraproject.org//work/tasks/4719/4994719/build.log Buildfile: /builddir/build/BUILD/libvirt-java-0.4.9/build.xml init: [mkdir] Created dir: /builddir/build/BUILD/libvirt-java-0.4.9/target/classes [mkdir] Created dir: /builddir/build/BUILD/libvirt-java-0.4.9/target/testclasses [copy] Copying 1 file to /builddir/build/BUILD/libvirt-java-0.4.9 build: [javac] /builddir/build/BUILD/libvirt-java-0.4.9/build.xml:42: warning: 'includeantruntime' was not set, defaulting to build.sysclasspath=last; set to false for repeatable builds [javac] Compiling 63 source files to /builddir/build/BUILD/libvirt-java-0.4.9/target/classes [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virError.java:9: error: virError is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virError extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virConnectAuth.java:9: error: virConnectAuth is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virConnectAuth extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virDomainBlockStats.java:8: error: virDomainBlockStats is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virDomainBlockStats extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virDomainBlockInfo.java:5: error: virDomainBlockInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virDomainBlockInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virDomainInfo.java:9: error: virDomainInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virDomainInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virDomainJobInfo.java:5: error: virDomainJobInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virDomainJobInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virSchedParameter.java:8: error: virSchedParameter is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virSchedParameter extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virVcpuInfo.java:8: error: virVcpuInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virVcpuInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virDomainInterfaceStats.java:8: error: virDomainInterfaceStats is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virDomainInterfaceStats extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virDomainMemoryStats.java:5: error: virDomainMemoryStats is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virDomainMemoryStats extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virNodeInfo.java:9: error: virNodeInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virNodeInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virStoragePoolInfo.java:8: error: virStoragePoolInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virStoragePoolInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virStorageVolInfo.java:8: error: virStorageVolInfo is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virStorageVolInfo extends Structure { [javac] ^ [javac] /builddir/build/BUILD/libvirt-java-0.4.9/src/main/java/org/libvirt/jna/virConnectCredential.java:8: error: virConnectCredential is not abstract and does not override abstract method getFieldOrder() in Structure [javac] public class virConnectCredential extends Structure implements Structure.ByReference { [javac] ^ [javac] 14 errors BUILD FAILED /builddir/build/BUILD/libvirt-java-0.4.9/build.xml:42: Compile failed; see the compiler error output for details. Not sure what we should do to fix this...so suggestions welcome. Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

2 3

[libvirt] [PATCH 0/2] qemu: allow multiple buses in PCI address allocation
by Ján Tomko 22 Feb '13

22 Feb '13

This miniseries converts the functions for reserving PCI addresses to use virDevicePCIAddress which we use in virDeviceInfo for PCI addresses (not to be confused with virPCIDeviceAddress from virpci.h used for host devices which should probably be merged with virDevicePCIAddress in a followup patch) and it makes them accept bus numbers up to 'maxbus', which should be set when creating the address set if multiple buses are allowed. Right now it's initialized to zero and these patches have no effect. Ján Tomko (2): qemu: switch PCI address alocation to use virDevicePCIAddress qemu: allow multiple buses in PCI address alocation src/qemu/qemu_command.c | 288 ++++++++++++++++++++++-------------------------- src/qemu/qemu_command.h | 13 +-- src/qemu/qemu_hotplug.c | 16 +-- 3 files changed, 147 insertions(+), 170 deletions(-) -- 1.7.12.4

2 6

[libvirt] How to connect to console of domain on PowerPC?
by Yin Olivia-R63875 22 Feb '13

22 Feb '13

Hi, I tried to use libvirt to run KVM/QEMU on Freescale PowerPC platforms. So far there's only one serial device (spapr-vty) defined in QEMU to work as console for IBM PSeries platform. There's no serial device support in QEMU for Freescale PowerPC (ePAPR). libvirt/src/qemu/qemu_command.c /* This function generates the correct '-device' string for character * devices of each architecture. */ char * qemuBuildChrDeviceStr(virDomainChrDefPtr serial, virBitmapPtr qemuCaps, char *os_arch, char *machine) { virBuffer cmd = VIR_BUFFER_INITIALIZER; if (STREQ(os_arch, "ppc64") && STREQ(machine, "pseries")) { if (serial->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL && serial->source.type == VIR_DOMAIN_CHR_TYPE_PTY && serial->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO) { virBufferAsprintf(&cmd, "spapr-vty,chardev=char%s", serial->info.alias); if (qemuBuildDeviceAddressStr(&cmd, &serial->info, qemuCaps) < 0) goto error; } } else virBufferAsprintf(&cmd, "isa-serial,chardev=char%s,id=%s", serial->info.alias, serial->info.alias); if (virBufferError(&cmd)) { virReportOOMError(); goto error; } return virBufferContentAndReset(&cmd); error: virBufferFreeAndReset(&cmd); return NULL; } We usually connect guest with telnet. For instance, /usr/bin/qemu-system-ppc -name demo -M ppce500v2 -enable-kvm -m 256 -nographic -kernel /media/ram/uImage -initrd /media/ram/ramdisk -append "root=/dev/ram rw console=ttyS0,115200" -serial tcp::4445,server Then to run 'telnet 10.193.20.xxx 4445' could connect the guest. The temporary workaround is not add '-device' string after '-serial' option. diff -Nur libvirt-0.10.1.orig/src/qemu/qemu_command.c libvirt-0.10.1/src/qemu/qemu_command.c --- libvirt-0.10.1.orig/src/qemu/qemu_command.c 2012-08-30 15:35:18.000000000 +0530 +++ libvirt-0.10.1/src/qemu/qemu_command.c 2012-10-05 17:19:32.060368755 +0530 @@ -5501,13 +5501,15 @@ virCommandAddArg(cmd, devstr); VIR_FREE(devstr); - virCommandAddArg(cmd, "-device"); - if (!(devstr = qemuBuildChrDeviceStr(serial, qemuCaps, + if (!STREQ(def->os.arch, "ppc")) { + virCommandAddArg(cmd, "-device"); + if (!(devstr = qemuBuildChrDeviceStr(serial, + qemuCaps, def->os.arch, def->os.machine))) - goto error; - virCommandAddArg(cmd, devstr); - VIR_FREE(devstr); + goto error; + virCommandAddArg(cmd, devstr); + VIR_FREE(devstr); + } } else { virCommandAddArg(cmd, "-serial"); if (!(devstr = qemuBuildChrArgStr(&serial->source, NULL))) Applying the above patch to libvirt, all the other domain control commands could work except 'virsh console domain'. # cat >demo.args <<EOF > /usr/bin/qemu-system-ppc -name demo -M ppce500v2 -enable-kvm -m 256 > -nographic -kernel /media/ram/uImage -initrd /media/ram/ramdisk > -append "root=/dev/ram rw console=ttyS0,115200" -serial > tcp::4445,server -net nic EOF # vi demo.args /usr/bin/qemu-system-ppc -name demo -M ppce500v2 -enable-kvm -m 256 -nographic -kernel /media/ram/uImage -initrd /media/ram/ramdisk -append "root=/dev/ram rw console=ttyS0,115200" -serial tcp::4445,server -net nic # virsh domxml-from-native qemu-argv demo.args >demo.xml # vi demo.xml <domain type='kvm'> <name>demo</name> <uuid>985d7154-83c8-0763-cbac-ecd159eee8a6</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='ppc' machine='ppce500v2'>hvm</type> <kernel>/media/ram/uImage</kernel> <initrd>/media/ram/ramdisk</initrd> <cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-ppc</emulator> <serial type='tcp'> <source mode='bind' host='' service='4445'/> <protocol type='raw'/> <target port='0'/> </serial> <console type='tcp'> <source mode='bind' host='' service='4445'/> <protocol type='raw'/> <target type='serial' port='0'/> </console> <memballoon model='virtio'/> </devices> </domain> # virsh -c qemu:///system define demo.xml # virsh -c qemu:///system start demo But it seemed that can't connect to the console. # virsh -c qemu:///system console demo Connected to domain test Escape character is ^] error: internal error character device (null) is not using a PTY I tried also use '-serial pty' option, /usr/bin/qemu-system-ppc -name test -M ppce500v2 -enable-kvm -m 256 -nographic -kernel /media/ram/uImage -initrd /media/ram/ramdisk -append "root=/dev/ram rw console=ttyS0,115200" -serial pty Then there's no other output after the below message: # virsh -c qemu:///system console demo Connected to domain test Escape character is ^] It seemed not libvirt group issue. I also tried the LXC. It could connect to the console if <init>/bin/sh/</init> instead of <init>/sbin/init</init> Best Regards, Olivia

2 5

[libvirt] [PATCH 1/2] conf: Don't leak 'primary' video property on error
by Christophe Fergeau 22 Feb '13

22 Feb '13

It's only freed on normal returns from virDomainVideoDefParseXML, but not when erroring out. --- src/conf/domain_conf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 10f361c..258ee93 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -7662,9 +7662,11 @@ virDomainVideoDefParseXML(const xmlNodePtr node, vram = virXMLPropString(cur, "vram"); heads = virXMLPropString(cur, "heads"); - if ((primary = virXMLPropString(cur, "primary")) != NULL) + if ((primary = virXMLPropString(cur, "primary")) != NULL) { if (STREQ(primary, "yes")) def->primary = 1; + VIR_FREE(primary); + } def->accel = virDomainVideoAccelDefParseXML(cur); } @@ -7728,7 +7730,6 @@ virDomainVideoDefParseXML(const xmlNodePtr node, VIR_FREE(ram); VIR_FREE(vram); VIR_FREE(heads); - VIR_FREE(primary); return def; -- 1.8.1.2

2 4

[libvirt] Reminder about coming freeze for 1.0.3
by Daniel Veillard 22 Feb '13

22 Feb '13

We are supposed to enter the freeze early Monday, so please try to push features today or over the w.e. , if there is something serious pending and that should go in and is in trouble please reply so it gets the required attention and can be processed in time :-) thanks ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[libvirt] [PATCHv2 0/6] interface: udev backend bond support
by Doug Goldstein 22 Feb '13

22 Feb '13

Refactor code, clean up error handling, and finally add bond support. The last patch optionally supports a patch I submitted to the Linux kernel which should go in for 3.9 (it was just accepted for net-next). After this patch when you have a bond device you'll get the following: $ ./tools/virsh iface-dumpxml br0 <interface type='bridge' name='br0'> <mtu size='1500'/> <bridge stp='on' delay='1499'> <interface type='bond' name='bond0'> <mtu size='1500'/> <bond mode='balance-rr'> <interface type='ethernet' name='eth2'> <mac address='d0:67:e5:fa:88:95'/> <mtu size='1500'/> </interface> <interface type='ethernet' name='eth3'> <mac address='d0:67:e5:fa:88:95'/> <mtu size='1500'/> </interface> </bond> </interface>  </bridge> </interface> Doug Goldstein (6): interface: Refactor udev bridge to helper func interface: udev bridge code error handling updates interface: Refactor interface vlan to helper func interface: Improve udev backend device type id interface: add bond support to udev backend interface: dev type support for bond interfaces src/interface/interface_backend_udev.c | 546 +++++++++++++++++++++++++++------ 1 file changed, 451 insertions(+), 95 deletions(-) -- 1.7.12.4

2 13

[libvirt] [PATCH] qemu: check backing chains even when cgroup is omitted
by Eric Blake 21 Feb '13

21 Feb '13

https://bugzilla.redhat.com/show_bug.cgi?id=896685 points out a regression caused by commit 38c4a9c - libvirt only labels the backing chain if the backing chain cache is populated, but the code to populate the cache was only conditionally performed if cgroup labeling was necessary. * src/qemu/qemu_cgroup.c (qemuSetupCgroup): Hoist cache setup... * src/qemu/qemu_process.c (qemuProcessStart): ...earlier into caller, where it is now unconditional. --- src/qemu/qemu_cgroup.c | 4 +--- src/qemu/qemu_process.c | 5 +++++ 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_cgroup.c b/src/qemu/qemu_cgroup.c index 4fde1af..e65b486 100644 --- a/src/qemu/qemu_cgroup.c +++ b/src/qemu/qemu_cgroup.c @@ -234,9 +234,7 @@ int qemuSetupCgroup(virQEMUDriverPtr driver, } for (i = 0; i < vm->def->ndisks ; i++) { - if (qemuDomainDetermineDiskChain(driver, vm->def->disks[i], - false) < 0 || - qemuSetupDiskCgroup(vm, cgroup, vm->def->disks[i]) < 0) + if (qemuSetupDiskCgroup(vm, cgroup, vm->def->disks[i]) < 0) goto cleanup; } diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 476e3ed..af8222b 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3706,6 +3706,11 @@ int qemuProcessStart(virConnectPtr conn, goto cleanup; VIR_DEBUG("Checking for CDROM and floppy presence"); + for (i = 0; i < vm->def->ndisks ; i++) { + if (qemuDomainDetermineDiskChain(driver, vm->def->disks[i], + false) < 0) + goto cleanup; + } if (qemuDomainCheckDiskPresence(driver, vm, flags & VIR_QEMU_PROCESS_START_COLD) < 0) goto cleanup; -- 1.8.1.2

2 2

[libvirt] [PATCH] virsh: add --start option to the define command
by Doug Goldstein 21 Feb '13

21 Feb '13

I often find myself doing virsh "define blah.xml; start blah". I figured adding this would be a easier^Hlazier way to do it. --- tools/virsh-domain.c | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-) diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c index e91939c..1a3af34 100644 --- a/tools/virsh-domain.c +++ b/tools/virsh-domain.c @@ -5597,6 +5597,7 @@ static const vshCmdInfo info_define[] = { static const vshCmdOptDef opts_define[] = { {"file", VSH_OT_DATA, VSH_OFLAG_REQ, N_("file containing an XML domain description")}, + {"start", VSH_OT_BOOL, 0, N_("start the domain after creation")}, {NULL, 0, 0, NULL} }; @@ -5607,6 +5608,7 @@ cmdDefine(vshControl *ctl, const vshCmd *cmd) const char *from = NULL; bool ret = true; char *buffer; + bool start; if (vshCommandOptString(cmd, "file", &from) <= 0) return false; @@ -5614,17 +5616,31 @@ cmdDefine(vshControl *ctl, const vshCmd *cmd) if (virFileReadAll(from, VSH_MAX_XML_FILE, &buffer) < 0) return false; + start = vshCommandOptBool(cmd, "start"); + dom = virDomainDefineXML(ctl->conn, buffer); VIR_FREE(buffer); if (dom != NULL) { vshPrint(ctl, _("Domain %s defined from %s\n"), virDomainGetName(dom), from); - virDomainFree(dom); } else { vshError(ctl, _("Failed to define domain from %s"), from); - ret = false; + return false; } + + /* Start the domain if the user requested it and it was defined */ + if (start) { + if (virDomainCreate(dom) < 0) { + vshError(ctl, _("Failed to start domain %s, which was " + "successfully defined."), virDomainGetName(dom)); + ret = false; + } else { + vshPrint(ctl, _("Domain %s started\n"), virDomainGetName(dom)); + } + } + + virDomainFree(dom); return ret; } -- 1.7.8.6

7 10

[libvirt] [PATCH] Update arch names in RNG schema to match virarch.c
by Daniel P. Berrange 21 Feb '13

21 Feb '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> When the virarch.c file was introduced to formalize the arch list, we forgot to update the RNG schema with the new arches. --- docs/schemas/basictypes.rng | 34 ++++++++++++++++++++++++++++++++++ docs/schemas/capability.rng | 17 ----------------- 2 files changed, 34 insertions(+), 17 deletions(-) diff --git a/docs/schemas/basictypes.rng b/docs/schemas/basictypes.rng index 2d2f442..cfc8208 100644 --- a/docs/schemas/basictypes.rng +++ b/docs/schemas/basictypes.rng @@ -231,4 +231,38 @@ </data> </define> + <define name='archnames'> + <choice> + <value>alpha</value> + <value>armv7l</value> + <value>cris</value> + <value>i686</value> + <value>ia64</value> + <value>lm32</value> + <value>m68k</value> + <value>microblaze</value> + <value>microblazeel</value> + <value>mips</value> + <value>mipsel</value> + <value>mips64</value> + <value>mips64el</value> + <value>openrisc</value> + <value>parisc</value> + <value>parisc64</value> + <value>ppc</value> + <value>ppc64</value> + <value>ppcemb</value> + <value>s390</value> + <value>s390x</value> + <value>sh4</value> + <value>sh4eb</value> + <value>sparc</value> + <value>sparc64</value> + <value>unicore32</value> + <value>x86_64</value> + <value>xtensa</value> + <value>xtensaeb</value> + </choice> + </define> + </grammar> diff --git a/docs/schemas/capability.rng b/docs/schemas/capability.rng index 53fb04a..8f3fbd9 100644 --- a/docs/schemas/capability.rng +++ b/docs/schemas/capability.rng @@ -367,23 +367,6 @@ </attribute> </define> - <define name='archnames'> - <choice> - <value>arm</value> - <value>i686</value> - <value>ia64</value> - <value>microblaze</value> - <value>microblazeel</value> - <value>mips</value> - <value>mipsel</value> - <value>ppc64</value> - <value>ppc</value> - <value>s390</value> - <value>sparc</value> - <value>x86_64</value> - </choice> - </define> - <define name='featureName'> <data type='string'> <param name='pattern'>[a-zA-Z0-9\-_]+</param> -- 1.8.1

2 1

[libvirt] [PATCH V8 0/3] Add support for QEMU file descriptor sets
by Stefan Berger 21 Feb '13

21 Feb '13

The following patch series adds initial support for QEMU file descriptor sets implementing support for creating the proper command line. Some devices are using the sets now. Regards, Stefan

1 3

[libvirt] [PATCH] docs: Add missing 'vram' in QXL video device doc
by Christophe Fergeau 21 Feb '13

21 Feb '13

--- Pushed under the trivial rule. docs/formatdomain.html.in | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index ffcc33e..a9003d7 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -3583,7 +3583,8 @@ qemu-kvm -net nic,model=? /dev/null attribute <code>ram</code> (<span class="since">since 1.0.2</span>) is allowed for "qxl" type only and specifies the size of the primary bar, while <code>vram</code> specifies the - secondary bar size. If "ram" is not supplied a default value is used. + secondary bar size. If "ram" or "vram" are not supplied a default + value is used. </dd> <dt><code>model</code></dt> -- 1.8.1.2

1 0

[libvirt] [test-API][PATCH v2] Add 2 host node memory API cases
by Wayne Sun 21 Feb '13

21 Feb '13

v1: add 2 host node memory cases and update conf - node_mem_param: tuning host node memory parameters - node_memory: get host node memory info, including host free memory, node free memory and node memory stats - numa_param conf is updated with the 2 new cases v2: node_mem_param: polish codes with better readability node_memory: direct fetch info in /sys/devices/system/node/node* other than using command 'numastat' Signed-off-by: Wayne Sun <gsun(a)redhat.com> --- cases/numa_param.conf | 8 ++++ repos/numa/node_mem_param.py | 81 ++++++++++++++++++++++++++++++++ repos/numa/node_memory.py | 107 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 196 insertions(+) create mode 100644 repos/numa/node_mem_param.py create mode 100644 repos/numa/node_memory.py diff --git a/cases/numa_param.conf b/cases/numa_param.conf index 64268a3..515fb1f 100644 --- a/cases/numa_param.conf +++ b/cases/numa_param.conf @@ -1,3 +1,11 @@ +numa:node_memory + +numa:node_mem_param + shm_pages_to_scan + 200 + shm_sleep_millisecs + 20 + domain:install_linux_cdrom guestname $defaultname diff --git a/repos/numa/node_mem_param.py b/repos/numa/node_mem_param.py new file mode 100644 index 0000000..86242b1 --- /dev/null +++ b/repos/numa/node_mem_param.py @@ -0,0 +1,81 @@ +#!/usr/bin/env python +# Test tuning host node memory parameters + +import libvirt +from libvirt import libvirtError + +from src import sharedmod + +required_params = () +optional_params = {"shm_pages_to_scan": 100, + "shm_sleep_millisecs": 20, + "shm_merge_across_nodes": 1 + } + +KSM_PATH = "/sys/kernel/mm/ksm/" + +def node_mem_param(params): + """test set host node memory parameters + """ + logger = params['logger'] + shm_pages_to_scan = params.get('shm_pages_to_scan') + shm_sleep_millisecs = params.get('shm_sleep_millisecs') + shm_merge_across_nodes = params.get('shm_merge_across_nodes') + + if not shm_pages_to_scan \ + and not shm_sleep_millisecs \ + and not shm_merge_across_nodes: + logger.error("given param is none") + return 1 + + param_dict = {} + for i in optional_params.keys(): + if eval(i): + param_dict[i] = int(eval(i)) + + logger.info("the given param dict is: %s" % param_dict) + + conn = sharedmod.libvirtobj['conn'] + + try: + logger.info("get host node memory parameters") + mem_pre = conn.getMemoryParameters(0) + logger.info("host node memory parameters is: %s" % mem_pre) + + logger.info("set host node memory parameters with given param %s" % + param_dict) + conn.setMemoryParameters(param_dict, 0) + logger.info("set host node memory parameters done") + + logger.info("get host node memory parameters") + mem_pos = conn.getMemoryParameters(0) + logger.info("host node memory parameters is: %s" % mem_pos) + + for i in param_dict.keys(): + if not mem_pos[i] == param_dict[i]: + logger.error("%s is not set as expected" % i) + + logger.info("node memory parameters is set as expected") + + logger.info("check tuning detail under %s" % KSM_PATH) + + ksm_dict = {} + for i in param_dict.keys(): + path = "%s%s" % (KSM_PATH, i[4:]) + f = open(path) + ret = int(f.read().split('\n')[0]) + f.close() + logger.info("%s value is: %s" % (path, ret)) + ksm_dict[i] = ret + + if ksm_dict == param_dict: + logger.info("tuning detail under %s is expected" % KSM_PATH) + else: + logger.error("check with tuning detail under %s failed" % KSM_PATH) + return 1 + + except libvirtError, e: + logger.error("libvirt call failed: " + str(e)) + return 1 + + return 0 diff --git a/repos/numa/node_memory.py b/repos/numa/node_memory.py new file mode 100644 index 0000000..0241f3c --- /dev/null +++ b/repos/numa/node_memory.py @@ -0,0 +1,107 @@ +#!/usr/bin/env python +# Test get host node memory info, including host free +# memory, node free memory and node memory stats. + +import math + +import libvirt +from libvirt import libvirtError + +from src import sharedmod +from utils import utils + +required_params = () +optional_params = {} + +NODE_MEMINFO_PATH = "/sys/devices/system/node/node*/meminfo" + +def node_memory(params): + """test get host node memory info + """ + logger = params['logger'] + + cmd = "lscpu|grep 'NUMA node(s)'" + ret, output = utils.exec_cmd(cmd, shell=True) + node_num = int(output[0].split(' ')[-1]) + logger.info("host total nodes number is: %s" % node_num) + + conn = sharedmod.libvirtobj['conn'] + + cmd = "grep 'MemFree' %s" % NODE_MEMINFO_PATH + node_mem = [] + free_total = 0 + ret, out = utils.exec_cmd(cmd, shell=True) + for i in range(node_num): + mem_free = int(out[i].split()[-2]) + node_mem.append(mem_free) + free_total += mem_free + + try: + logger.info("get host total free memory") + mem = conn.getFreeMemory()/1024 + logger.info("host free memory total is: %s KiB" % mem) + logger.info("free memory collected in %s is: %s KiB" % + (NODE_MEMINFO_PATH, free_total)) + + if math.fabs(mem - free_total) > 1024: + logger.error("free memory mismatch with info collected in %s" % + NODE_MEMINFO_PATH) + return 1 + else: + logger.info("get host free memory succeed") + + logger.info("get free memory of nodes") + ret = conn.getCellsFreeMemory(0, node_num) + mem_list = [i/1024 for i in ret] + logger.info("node free memory list is: %s" % mem_list) + logger.info("node free memory list collected in %s is: %s" % + (NODE_MEMINFO_PATH, node_mem)) + + for i in range(node_num): + if math.fabs(mem_list[i] - node_mem[i]) > 1024: + path = NODE_MEMINFO_PATH.replace('*', '%s') % i + logger.error("node %s free memory mismatch with collected in %s" + % (i, path)) + return 1 + + logger.info("get node free memory succeed") + + logger.info("get node memory stats") + node_dict = {} + for i in range(node_num): + ret = conn.getMemoryStats(i, 0) + node_dict[i] = ret + logger.info("node %s memory stats is: %s" % (i, node_dict[i])) + + node_tmp = {} + cmd_new = "grep 'MemTotal' %s" % NODE_MEMINFO_PATH + ret, out_free = utils.exec_cmd(cmd, shell=True) + ret, out_total = utils.exec_cmd(cmd_new, shell=True) + for i in range(node_num): + dict_tmp = {} + path = NODE_MEMINFO_PATH.replace('*', '%s') % i + dict_tmp['free'] = int(out_free[i].split()[-2]) + dict_tmp['total'] = int(out_total[i].split()[-2]) + node_tmp[i] = dict_tmp + logger.info("node %s memory stats collected in %s is: %s" % + (i, path, node_tmp[i])) + + for i in range(node_num): + path = NODE_MEMINFO_PATH.replace('*', '%s') % i + if math.fabs(node_tmp[i]['total'] - node_dict[i]['total']) > 1024: + logger.error("node %s total memory is mismatch with %s" % + (i, path)) + return 1 + + if math.fabs(node_tmp[i]['free'] - node_dict[i]['free']) > 1024: + logger.error("node %s free memory is mismatch with %s" % + (i, path)) + return 1 + + logger.info("get node memory stats succeed") + + except libvirtError, e: + logger.error("libvirt call failed: " + str(e)) + return 1 + + return 0 -- 1.8.1

1 0

[libvirt] libvirt maint branches
by Doug Goldstein 21 Feb '13

21 Feb '13

Instead of hijacking another thread I figured I'd start a new one. I tried to push the branch I had made as requested by Jiri, but I don't appear to have access. $ git push origin v1.0.2-maint Counting objects: 30, done. Delta compression using up to 4 threads. Compressing objects: 100% (18/18), done. Writing objects: 100% (22/22), 3.44 KiB, done. Total 22 (delta 16), reused 5 (delta 4)remote: *** Creating a branch is not allowed in this repository remote: error: hook declined to update refs/heads/v1.0.2-maint To ssh://libvirt.org/git/libvirt.git ! [remote rejected] v1.0.2-maint -> v1.0.2-maint (hook declined) error: failed to push some refs to 'ssh://libvirt.org/git/libvirt.git' How do we want to go about actually creating these branches? I make one everytime I have to backport a fix due to a regression from a previous release. I'll typically only keep them "maintained" until the next official release. I wouldn't consider them stable like what Cole maintains but more like someone ran into an issue and it needed a fix. So there might be other issues in them that go undiscovered or unsolved. I just say this because I don't want to clutter the repo with a lot of useless branches, but again if people think they'd be useful I'm happy to push them. -- Doug Goldstein

2 1

[libvirt] [PATCH 0/2] qemu: Fix deadlocks in autodestroy
by Jiri Denemark 21 Feb '13

21 Feb '13

After the recent removal of qemu driver locks, implicit driver locks were introduced in places that previously relied on being called from functions that alread had the driver locked. Thus calling anything complex (such as close callbacks) must not be called when the driver is locked... Jiri Denemark (2): qemu: Turn closeCallbacks into virObjectLockable qemu: Avoid deadlock in autodestroy src/qemu/qemu_conf.c | 172 ++++++++++++++++++++++++++++------------------ src/qemu/qemu_conf.h | 43 ++++++------ src/qemu/qemu_domain.h | 1 + src/qemu/qemu_driver.c | 12 ++-- src/qemu/qemu_migration.c | 6 +- src/qemu/qemu_process.c | 20 ++++-- 6 files changed, 153 insertions(+), 101 deletions(-) -- 1.8.1.2

4 10

[libvirt] [PATCH] docs: Fix HTML errors
by Jiri Denemark 21 Feb '13

21 Feb '13

<pre> is forbidden inside <p> --- Pushed as trivial. docs/formatnetwork.html.in | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index adb5bb9..f7c483d 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -143,6 +143,7 @@ The address range is set with the <code><address></code> subelements and <code>start</code> and <code>stop</code> attributes: + </p> <pre> ... <forward mode='nat'> @@ -150,8 +151,8 @@ <address start='1.2.3.4' end='1.2.3.10'/> </nat> </forward> -... - </pre> +...</pre> + <p> An singe IPv4 address can be set by setting <code>start</code> and <code>end</code> attributes to the same value. @@ -159,6 +160,7 @@ <p> The port range to be used for the <code><nat></code> can be set via the subelement <code><port></code>: + </p> <pre> ... <forward mode='nat'> @@ -166,9 +168,7 @@ <port start='500' end='1000'/> </nat> </forward> -... - </pre> - </p> +...</pre> </dd> <dt><code>route</code></dt> -- 1.8.1.2

1 0