April 2026 - Devel - libvirt List Archives

[PATCH v3 0/5] qemu: support async live vCPU unplug
by Akash Kulhalli 12 May '26

12 May '26

This series adds support for asynchronous live vCPU unplug in the QEMU driver. For live vCPU unplug libvirt currently waits only for a short synchronous completion window. If the unplug completes later there is no dedicated event reporting successful removal of the vCPU. This series adds a new domain event for successful unplug completion and extends the public APIs to allow requesting asynchronous unplug. As recommended, this changeset is split into five parts- Patch 1 adds the new event and the required public/internal plumbing. Patch 2 wires the event into the existing QEMU unplug completion path. Patch 3 adds the internal QEMU plumbing needed to skip waiting for unplug completion, but leaves it unused for now. Patches 4 and 5 then expose the new behaviour through virDomainSetVcpusFlags() and virDomainSetVcpu() together with the corresponding virsh changes. The new public flags are limited to live unplug. Rejected unplug requests continue to be reported via device-removal-failed. Most impactful change from the previous iteration is that event emission moves from 1 vcpu-removed per qemu event model to one vcpu-removed per vcpu actually removed. This change is effectively a no-op for x86 (because there is a 1:1 mapping), but is relevant for architectures where more than 1 vcpu might be grouped under a single logical qemu vcpu object. Changes from v2: - s/virDomainSetVcpuBehaviour/virDomainSetVcpuFlags/g - Reduce redundant phrasing - emit `vcpu-removed` for every vcpu removed instead of per qemu event - bump version ton 12.4.0 All test runs are still passing cleanly. Akash Kulhalli (5): API/qemu: add async unplug flag to virDomainSetVcpu API/qemu: add async unplug flag to virDomainSetVcpusFlags qemu: thread async vcpu unplug through internal helpers qemu: emit vcpu-removed event on unplug completion conf,remote: add vcpu-removed domain event Related discussion: RFC: https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/2J53… v2: https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/YZID…

2 10

[PATCH v3 0/2] allow migrations with the ext transport
by Mark Cave-Ayland 08 May '26

08 May '26

[MCA: I've now adopted these patches from Sergey] Hello, I have a use case for live-migration where the socket of the destination libvirtd is proxied by an mTLS WebSocket proxy. Since there is no WebSocket support in Libvirt, I've decided to use the existing ext transport and point it to a proxy binary on the source host of live-migration. While doing that, I've discovered a couple of roadblocks: 1. There is no way of passing cmdline arguments to the ext program 2. Live-migrations using ext transport fail localhost checks This short series addresses those limitations. v2 -> v3: - fix passing of extArgs v1 -> v2: - new way of passing argv Sergey Dyasli (2): remote: allow passing argv to the ext transport remote: allow migrations with the ext transport src/libvirt-domain.c | 8 +++++--- src/remote/remote_driver.c | 30 ++++++++++++++++++++++++++---- src/util/viruri.c | 32 ++++++++++++++++++++++++++++++++ src/util/viruri.h | 2 ++ 4 files changed, 65 insertions(+), 7 deletions(-) -- 2.43.0

1 3

[PATCH v2 00/35] qemu: Add infrastructure to prevent accidental disk shrink via 'virDomainBlockResize' (part 2)
by Peter Krempa 07 May '26

07 May '26

v2: - possibility to query flags for every API at once A comment in v1 suggested that polling flags one by one is ineffective. It was also limited to virDomainBlockResize. This version adds an API 'virConnectGetIntrospection' which allows to probe for every flag of every API at once via the introspection XML which also informs users about supported typed parameters. Patches 1-34 are new in the series. Patch 35 is adapted to use the new introspection API. This is partially a RFC: - documentation and schema for the new XML will be contributed later - I've contemplated adding typed parameters as input for the new API if we'd want to extend it to e.g. allow probing supported stuff for e.g. a hypervisor version Breakdown of patches: Semi-unrelated refactors/fixes: remote_protocol-structs: fix mis-aligned 'remote_domain_set_throttle_group_args' qemu: driver: Unify coding style util: typedparam: Convert VIR_TYPED_PARAM_CHECK_TYPE into a function util: virTypedParamValidateType: Don't report unknown typed parameter type as '(null)' util: Replace open-coded internals of VIR_TYPED_PARAMS_DEBUG with 'virTypedParamDebugstr' util: typedparam: Unexport virTypedParameterTypeFromString/virTypedParameterTypeToString util: typedparam: Refactor and fix typed param validation scripts: check-symfile: Allow also symbols in 'readonly' section virHostCPUGet(Map|Stats): Remove unused 'flags' virHostMemGet(Stats|Parameters): Remove unused 'flags' virNodeSuspend: Remove unused 'flags' Changes to allow the introspection script to parse flags: qemu: backup: Move 'virCheckFlags' to top level functions qemu: attach/detach device: Move 'virCheckFlags' to top level functions qemu: dump: Move 'virCheckFlags' to top level functions qemu: checkpoint: Move 'virCheckFlags' to top level functions qemuDomainRestore(Flags|Params): Refactor flag checking qemu: snapshot: Move flag checks to top level functions qemuDomainGetLaunchSecurityInfo: Move flag check to top level qemuDomainDetachDeviceAlias: Move 'flags' validation to top level qemuDomainManagedSaveDefineXML: Add top-level flag validation qemuDomainQemuMonitorCommand: Add top-level flag validation qemuConnectDomainQemuMonitorEventRegister: Add top-level flag validation qemuDomainGetMetadata: Add top-level flag validation API addition and implementation of the introspection api supporting flag introspection: API: Introduce 'virConnectGetIntrospection' virsh: Introduce 'introspection' command which uses 'virConnectGetIntrospection' scripts: Introduce 'getintrospection' script qemu: Implement 'virConnectGetIntrospection' Cleanups needed in order to support typed parameter introspection util: typedparam: Introduce 'virTypedParamsValidateTemplate' qemu: migration: Use 'virTypedParamsValidateTemplate' for migration params qemu: Reimplement 'qemuDomainValidateBlockIoTune' using 'virTypedParamsValidateTemplate' util: hostmem: Make parameters for 'virHostMemSetParameters' introspectable qemuDomainSetSchedulerParameters: Make typed parameters introspectable qemuDomainSetIOThreadParams: Move typed parameter validation to top level Implementation of typed parameter introspection: introspection: Add introspection of input typed parameters Original patch to prevent shrink in virsh: virsh: blockresize: Use VIR_DOMAIN_BLOCK_RESIZE_EXTEND when available and introduce --allow-shrink docs/manpages/virsh.rst | 30 +- include/libvirt/libvirt-host.h | 3 + scripts/check-symfile.py | 2 +- scripts/genintrospection.py | 347 ++++++++++++++++++++ scripts/meson.build | 1 + src/bhyve/bhyve_driver.c | 20 +- src/ch/ch_driver.c | 11 +- src/conf/domain_conf.c | 3 +- src/conf/domain_conf.h | 4 + src/conf/domain_event.c | 4 +- src/conf/domain_event.h | 5 + src/driver-hypervisor.h | 5 + src/libvirt-host.c | 40 +++ src/libvirt_private.syms | 10 +- src/libvirt_public.syms | 5 + src/lxc/lxc_driver.c | 24 +- src/openvz/openvz_driver.c | 12 +- src/qemu/meson.build | 18 ++ src/qemu/qemu_backup.c | 8 +- src/qemu/qemu_backup.h | 3 +- src/qemu/qemu_checkpoint.c | 11 - src/qemu/qemu_driver.c | 543 ++++++++++++++++++++------------ src/qemu/qemu_migration.c | 29 ++ src/qemu/qemu_migration.h | 32 +- src/qemu/qemu_snapshot.c | 27 -- src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 15 +- src/remote_protocol-structs | 21 +- src/util/meson.build | 1 + src/util/virhostcpu.c | 10 +- src/util/virhostcpu.h | 6 +- src/util/virhostmem.c | 53 ++-- src/util/virhostmem.h | 11 +- src/util/virintrospection.c | 82 +++++ src/util/virintrospection.h | 20 ++ src/util/virnodesuspend.c | 5 +- src/util/virnodesuspend.h | 3 +- src/util/virtypedparam-public.c | 54 ++-- src/util/virtypedparam.c | 222 +++++++++---- src/util/virtypedparam.h | 26 +- src/vz/vz_driver.c | 12 +- tests/virhostcputest.c | 2 +- tools/virsh-domain.c | 59 ++++ tools/virsh-host.c | 43 +++ 44 files changed, 1384 insertions(+), 459 deletions(-) create mode 100644 scripts/genintrospection.py create mode 100644 src/util/virintrospection.c create mode 100644 src/util/virintrospection.h -- 2.54.0

3 44

[PATCH] sync_qemu_models_i386: add new features for nested virtualization
by Paolo Bonzini 07 May '26

07 May '26

These features do not appear yet in the CPU models, but will be added soon: https://lore.kernel.org/qemu-devel/20260330193428.1663253-2-jon@nutanix.com/ https://lore.kernel.org/qemu-devel/20260330193428.1663253-4-jon@nutanix.com/ Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> --- src/cpu_map/sync_qemu_models_i386.py | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/cpu_map/sync_qemu_models_i386.py b/src/cpu_map/sync_qemu_models_i386.py index 447a77f389..68f162b964 100755 --- a/src/cpu_map/sync_qemu_models_i386.py +++ b/src/cpu_map/sync_qemu_models_i386.py @@ -220,6 +220,7 @@ def translate_feature(name, model): "CPUID_SVM_PFTHRESHOLD": "pfthreshold", "CPUID_SVM_V_VMSAVE_VMLOAD": "v-vmsave-vmload", "CPUID_SVM_VGIF": "vgif", + "CPUID_SVM_GMET": "gmet", "CPUID_TSC": "tsc", "CPUID_VME": "vme", "CPUID_XSAVE_XGETBV1": "xgetbv1", @@ -287,6 +288,7 @@ def translate_feature(name, model): "VMX_SECONDARY_EXEC_XSAVES": "vmx-xsaves", "VMX_SECONDARY_EXEC_TSC_SCALING": "vmx-tsc-scaling", "VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE": "vmx-enable-user-wait-pause", + "VMX_SECONDARY_EXEC_MODE_BASED_EPT_EXEC": "vmx-mbec", # FEAT_VMX_PINBASED_CTLS "VMX_PIN_BASED_EXT_INTR_MASK": "vmx-intr-exit", -- 2.54.0

2 1

[PATCH v6] vmx: configure TPM device in the XML
by Srihari Parimi 04 May '26

04 May '26

Parses vtpm.present from VMX files and converts to libvirt TPM device with CRB model and emulator backend. VMware vTPM uses TPM 2.0 as specified in the document below https://techdocs.broadcom.com/us/en/vmware-cis/vsphere/vsphere/8-0/vsphere-… implement support for formatting TPM devices in virVMXFormatConfig Signed-off-by: Srihari Parimi <sparimi(a)redhat.com> --- src/vmx/vmx.c | 74 ++++++++++++++++++++++++++++++++++++++ tests/vmx2xmldata/vtpm.vmx | 22 ++++++++++++ tests/vmx2xmldata/vtpm.xml | 32 +++++++++++++++++ tests/vmx2xmltest.c | 2 ++ 4 files changed, 130 insertions(+) create mode 100644 tests/vmx2xmldata/vtpm.vmx create mode 100644 tests/vmx2xmldata/vtpm.xml diff --git a/src/vmx/vmx.c b/src/vmx/vmx.c index 57dfd57cfc..977fd3b346 100644 --- a/src/vmx/vmx.c +++ b/src/vmx/vmx.c @@ -599,6 +599,7 @@ static int virVMXParseSerial(virVMXContext *ctx, virConf *conf, int port, static int virVMXParseParallel(virVMXContext *ctx, virConf *conf, int port, virDomainChrDef **def); static int virVMXParseSVGA(virConf *conf, virDomainVideoDef **def); +static int virVMXParseTPM(virConf *conf, virDomainTPMDef **def); static int virVMXFormatVNC(virDomainGraphicsDef *def, virBuffer *buffer); static int virVMXFormatDisk(virVMXContext *ctx, virDomainDiskDef *def, @@ -609,6 +610,7 @@ static int virVMXFormatFileSystem(virDomainFSDef *def, int number, virBuffer *buffer); static int virVMXFormatEthernet(virDomainNetDef *def, int controller, virBuffer *buffer, int virtualHW_version); +static int virVMXFormatTPM(virDomainTPMDef *def, virBuffer *buffer); static int virVMXFormatSerial(virVMXContext *ctx, virDomainChrDef *def, virBuffer *buffer); static int virVMXFormatParallel(virVMXContext *ctx, virDomainChrDef *def, @@ -1938,6 +1940,15 @@ virVMXParseConfig(virVMXContext *ctx, def->nvideos = 1; + /* def:tpms */ + { + virDomainTPMDef *tpm = NULL; + if (virVMXParseTPM(conf, &tpm) < 0) + goto cleanup; + if (tpm) + VIR_APPEND_ELEMENT(def->tpms, def->ntpms, tpm); + } + /* def:sounds */ /* FIXME */ @@ -3367,6 +3378,27 @@ virVMXParseSVGA(virConf *conf, virDomainVideoDef **def) return result; } +static int +virVMXParseTPM(virConf *conf, virDomainTPMDef **def) +{ + bool vtpm_present = false; + + /* vmx:vtpm.present */ + if (virVMXGetConfigBoolean(conf, "vtpm.present", &vtpm_present, + false, true) < 0) { + return -1; + } + + if (!vtpm_present) + return 0; + + *def = g_new0(virDomainTPMDef, 1); + (*def)->type = VIR_DOMAIN_TPM_TYPE_EMULATOR; + (*def)->model = VIR_DOMAIN_TPM_MODEL_CRB; + (*def)->data.emulator.version = VIR_DOMAIN_TPM_VERSION_2_0; + + return 0; +} /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -3701,6 +3733,31 @@ virVMXFormatConfig(virVMXContext *ctx, virDomainXMLOption *xmlopt, virDomainDef goto cleanup; } + /* def:vTPM */ + if (def->ntpms > 0) { + /* Validate TPM requirements */ + if (def->ntpms > 1) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("VMware only supports a single TPM device")); + goto cleanup; + } + + if (virtualHW_version < 14) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("vTPM requires virtual hardware version 14 or higher")); + goto cleanup; + } + + if (def->os.firmware != VIR_DOMAIN_OS_DEF_FIRMWARE_EFI) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("vTPM requires EFI firmware")); + goto cleanup; + } + + if (virVMXFormatTPM(def->tpms[0], &buffer) < 0) + goto cleanup; + } + /* def:inputs */ /* FIXME */ @@ -4231,6 +4288,23 @@ virVMXFormatEthernet(virDomainNetDef *def, int controller, } +static int virVMXFormatTPM(virDomainTPMDef *def, virBuffer *buffer) +{ + /* VMware vTPM specifically requires TPM 2.0 */ + if (def->model != VIR_DOMAIN_TPM_MODEL_CRB || + def->type != VIR_DOMAIN_TPM_TYPE_EMULATOR || + def->data.emulator.version != VIR_DOMAIN_TPM_VERSION_2_0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("VMware driver only supports TPM 2.0 with the CRB model")); + return -1; + } + + /* VMX parameters for vTPM */ + virBufferAddLit(buffer, "vtpm.present = \"TRUE\"\n"); + + return 0; +} + static int virVMXFormatSerial(virVMXContext *ctx, virDomainChrDef *def, diff --git a/tests/vmx2xmldata/vtpm.vmx b/tests/vmx2xmldata/vtpm.vmx new file mode 100644 index 0000000000..6e2fd725b7 --- /dev/null +++ b/tests/vmx2xmldata/vtpm.vmx @@ -0,0 +1,22 @@ +config.version = "8" +virtualHW.version = "19" +displayName = "test-vtpm" +memsize = "4096" +numvcpus = "2" +guestOS = "windows9-64" + +# Disk Configuration +scsi0.present = "TRUE" +scsi0.virtualDev = "lsisas1068" +scsi0:0.present = "TRUE" +scsi0:0.deviceType = "scsi-hardDisk" +scsi0:0.fileName = "test_disk.vmdk" + +# vTPM configuration +vtpm.present = "TRUE" + +# Network Configuration +ethernet0.present = "TRUE" +ethernet0.connectionType = "nat" +ethernet0.virtualDev = "e1000e" +ethernet0.addressType = "generated" diff --git a/tests/vmx2xmldata/vtpm.xml b/tests/vmx2xmldata/vtpm.xml new file mode 100644 index 0000000000..cbb23ce673 --- /dev/null +++ b/tests/vmx2xmldata/vtpm.xml @@ -0,0 +1,32 @@ +<domain type='vmware'> + <name>test-vtpm</name> + <uuid>00000000-0000-0000-0000-000000000000</uuid> + <memory unit='KiB'>4194304</memory> + <currentMemory unit='KiB'>4194304</currentMemory> + <vcpu placement='static'>2</vcpu> + <os> + <type arch='x86_64'>hvm</type> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <disk type='file' device='disk'> + <source file='[datastore] directory/test_disk.vmdk'/> + <target dev='sda' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='scsi' index='0' model='lsisas1068'/> + <interface type='user'> + <mac address='00:00:00:00:00:00' type='generated'/> + <model type='e1000e'/> + </interface> + <tpm model='tpm-crb'> + <backend type='emulator' version='2.0'/> + </tpm> + <video> + <model type='vmvga' vram='4096' primary='yes'/> + </video> + </devices> +</domain> diff --git a/tests/vmx2xmltest.c b/tests/vmx2xmltest.c index fcca765bed..3ffc04fda4 100644 --- a/tests/vmx2xmltest.c +++ b/tests/vmx2xmltest.c @@ -243,6 +243,8 @@ mymain(void) DO_TEST("firmware-efi"); + DO_TEST("vtpm"); + ctx.datacenterPath = "folder1/folder2/datacenter1"; DO_TEST("datacenterpath"); -- 2.53.0

2 5

[PATCH v2] vmx: Add support for NVRAM configuration
by Surya Gupta 04 May '26

04 May '26

Some VMware guests specify NVRAM storage using the 'nvram' parameter. If found, parse it and store it in the domain's os.loader.nvram field, which gets formatted as: <os> <type arch='x86_64'>hvm</type> <nvram>[datastore] directory/dokuwiki.nvram</nvram> </os> The NVRAM path uses the same transformation functions as disk paths (ctx->parseFileName and ctx->formatFileName) to ensure consistent handling of datastore-qualified paths. The NVRAM is stored as a virStorageSource with type VIR_STORAGE_TYPE_FILE to ensure compatibility with libvirt's existing firmware handling infrastructure. Signed-off-by: Surya Gupta <surygupt(a)redhat.com> --- src/vmx/vmx.c | 27 ++++++++++++++++++++++++ tests/vmx2xmldata/case-insensitive-1.xml | 1 + tests/vmx2xmldata/case-insensitive-2.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-1.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-10.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-11.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-12.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-13.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-14.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-15.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-16.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-17.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-2.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-3.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-4.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-5.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-6.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-7.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-8.xml | 1 + tests/vmx2xmldata/esx-in-the-wild-9.xml | 1 + tests/vmx2xmldata/gsx-in-the-wild-1.xml | 1 + tests/vmx2xmldata/gsx-in-the-wild-2.xml | 1 + tests/vmx2xmldata/gsx-in-the-wild-3.xml | 1 + tests/vmx2xmldata/gsx-in-the-wild-4.xml | 1 + 24 files changed, 50 insertions(+) diff --git a/src/vmx/vmx.c b/src/vmx/vmx.c index 57dfd57cfc..4d21102861 100644 --- a/src/vmx/vmx.c +++ b/src/vmx/vmx.c @@ -1415,6 +1415,7 @@ virVMXParseConfig(virVMXContext *ctx, long long coresPerSocket = 0; virCPUDef *cpu = NULL; char *firmware = NULL; + g_autofree char *nvram = NULL; size_t saved_ndisks = 0; if (ctx->parseFileName == NULL) { @@ -2022,6 +2023,22 @@ virVMXParseConfig(virVMXContext *ctx, VIR_TRISTATE_BOOL_YES; } + /* vmx:nvram */ + if (virVMXGetConfigString(conf, "nvram", &nvram, true) < 0) { + goto cleanup; + } + + if (nvram != NULL) { + g_autoptr(virStorageSource) n = virStorageSourceNew(); + + def->os.loader = virDomainLoaderDefNew(); + + n->type = VIR_STORAGE_TYPE_FILE; + if (ctx->parseFileName(nvram, ctx->opaque, &(n->path), false) < 0) + goto cleanup; + def->os.loader->nvram = g_steal_pointer(&n); + } + if (virDomainDefPostParse(def, VIR_DOMAIN_DEF_PARSE_ABI_UPDATE, xmlopt, NULL) < 0) goto cleanup; @@ -3738,6 +3755,16 @@ virVMXFormatConfig(virVMXContext *ctx, virDomainXMLOption *xmlopt, virDomainDef if (def->os.firmware == VIR_DOMAIN_OS_DEF_FIRMWARE_EFI) virBufferAddLit(&buffer, "firmware = \"efi\"\n"); + /* vmx:nvram */ + if (def->os.loader && def->os.loader->nvram && def->os.loader->nvram->path) { + g_autofree char *nvramPath = NULL; + + nvramPath = ctx->formatFileName(def->os.loader->nvram->path, ctx->opaque); + if (nvramPath != NULL) { + virBufferAsprintf(&buffer, "nvram = \"%s\"\n", nvramPath); + } + } + if (virtualHW_version >= 7) { if (hasSCSI) { virBufferAddLit(&buffer, "pciBridge0.present = \"true\"\n"); diff --git a/tests/vmx2xmldata/case-insensitive-1.xml b/tests/vmx2xmldata/case-insensitive-1.xml index 7cb6413941..e854cc37cb 100644 --- a/tests/vmx2xmldata/case-insensitive-1.xml +++ b/tests/vmx2xmldata/case-insensitive-1.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/FEDORA11.NVRAM</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/case-insensitive-2.xml b/tests/vmx2xmldata/case-insensitive-2.xml index 188c3f3cd5..f5c4446ab5 100644 --- a/tests/vmx2xmldata/case-insensitive-2.xml +++ b/tests/vmx2xmldata/case-insensitive-2.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/fedora11.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-1.xml b/tests/vmx2xmldata/esx-in-the-wild-1.xml index c15275ccb9..9ae28c8497 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-1.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-1.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/Fedora11.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-10.xml b/tests/vmx2xmldata/esx-in-the-wild-10.xml index 78129682bd..1b1fdf0662 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-10.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-10.xml @@ -10,6 +10,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/windows2019biosvmware.nvram</nvram> </os> <cpu> <topology sockets='1' dies='1' clusters='1' cores='2' threads='1'/> diff --git a/tests/vmx2xmldata/esx-in-the-wild-11.xml b/tests/vmx2xmldata/esx-in-the-wild-11.xml index 8807a057d7..a0c1e05e90 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-11.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-11.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/esx6.7-rhel7.7-x86_64.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-12.xml b/tests/vmx2xmldata/esx-in-the-wild-12.xml index c5aad90677..ac83982b9b 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-12.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-12.xml @@ -13,6 +13,7 @@ <feature enabled='yes' name='enrolled-keys'/> <feature enabled='yes' name='secure-boot'/> </firmware> + <nvram>[datastore] directory/Auto-esx8.0-rhell9.3-efi-with-empty-cdrom.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-13.xml b/tests/vmx2xmldata/esx-in-the-wild-13.xml index e6ef947d50..cef9fd4e48 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-13.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-13.xml @@ -23,6 +23,7 @@ package:20.6.2 </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/Test-Mig-VM-1 (01ce57d0-4e20-41a5-8b6c-bcbf49a032ec).nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-14.xml b/tests/vmx2xmldata/esx-in-the-wild-14.xml index dd5c2434ee..f10707d1d4 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-14.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-14.xml @@ -7,6 +7,7 @@ <vcpu placement='static'>12</vcpu> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/wild14.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-15.xml b/tests/vmx2xmldata/esx-in-the-wild-15.xml index 77b094e9d5..78d15e1538 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-15.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-15.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/dokuwiki.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-16.xml b/tests/vmx2xmldata/esx-in-the-wild-16.xml index 147bc0825a..51746dd77e 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-16.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-16.xml @@ -13,6 +13,7 @@ <feature enabled='yes' name='enrolled-keys'/> <feature enabled='yes' name='secure-boot'/> </firmware> + <nvram>[datastore] directory/Auto-esx8.0-rhel9.4-efi-nvme-disk.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-17.xml b/tests/vmx2xmldata/esx-in-the-wild-17.xml index ae66de7431..725f21bdf6 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-17.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-17.xml @@ -10,6 +10,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/esx8.0-win11-with-second-disk-in-subfolder.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-2.xml b/tests/vmx2xmldata/esx-in-the-wild-2.xml index 59071b5d3a..59c7087300 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-2.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-2.xml @@ -6,6 +6,7 @@ <vcpu placement='static' cpuset='0-2,5-7'>4</vcpu> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/Debian1.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-3.xml b/tests/vmx2xmldata/esx-in-the-wild-3.xml index cbe8eceb37..29c63d8d6b 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-3.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-3.xml @@ -6,6 +6,7 @@ <vcpu placement='static' cpuset='0,3-5'>2</vcpu> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/Debian2.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-4.xml b/tests/vmx2xmldata/esx-in-the-wild-4.xml index a8a2ac6f97..82eccca1c4 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-4.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-4.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/virtMonServ1.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-5.xml b/tests/vmx2xmldata/esx-in-the-wild-5.xml index 9eb975afe9..c88e60bdc0 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-5.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-5.xml @@ -13,6 +13,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/vmtest.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-6.xml b/tests/vmx2xmldata/esx-in-the-wild-6.xml index 51c74dd8a1..805f033561 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-6.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-6.xml @@ -6,6 +6,7 @@ <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/el6-test.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-7.xml b/tests/vmx2xmldata/esx-in-the-wild-7.xml index c117bd62e5..b641574776 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-7.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-7.xml @@ -6,6 +6,7 @@ <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/esx-rhel6-mini.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/esx-in-the-wild-8.xml b/tests/vmx2xmldata/esx-in-the-wild-8.xml index 47d22ced2a..f13e6f7448 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-8.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-8.xml @@ -9,6 +9,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/RHEL7_6.nvram</nvram> </os> <cpu> <topology sockets='4' dies='1' clusters='1' cores='2' threads='1'/> diff --git a/tests/vmx2xmldata/esx-in-the-wild-9.xml b/tests/vmx2xmldata/esx-in-the-wild-9.xml index ee6be2527f..6b4d878ab1 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-9.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-9.xml @@ -10,6 +10,7 @@ </cputune> <os> <type arch='x86_64'>hvm</type> + <nvram>[datastore] directory/v2v-windows-kkulkarn.nvram</nvram> </os> <cpu> <topology sockets='4' dies='1' clusters='1' cores='4' threads='1'/> diff --git a/tests/vmx2xmldata/gsx-in-the-wild-1.xml b/tests/vmx2xmldata/gsx-in-the-wild-1.xml index 62ec191c82..f189ff79e4 100644 --- a/tests/vmx2xmldata/gsx-in-the-wild-1.xml +++ b/tests/vmx2xmldata/gsx-in-the-wild-1.xml @@ -6,6 +6,7 @@ <vcpu placement='static'>1</vcpu> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/Debian-System1.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/gsx-in-the-wild-2.xml b/tests/vmx2xmldata/gsx-in-the-wild-2.xml index 906e4657ca..d1c1bf39df 100644 --- a/tests/vmx2xmldata/gsx-in-the-wild-2.xml +++ b/tests/vmx2xmldata/gsx-in-the-wild-2.xml @@ -6,6 +6,7 @@ <vcpu placement='static'>1</vcpu> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/Server2.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/gsx-in-the-wild-3.xml b/tests/vmx2xmldata/gsx-in-the-wild-3.xml index 61812851e1..acc9d6ba5d 100644 --- a/tests/vmx2xmldata/gsx-in-the-wild-3.xml +++ b/tests/vmx2xmldata/gsx-in-the-wild-3.xml @@ -6,6 +6,7 @@ <vcpu placement='static'>1</vcpu> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/Debian-System3.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/vmx2xmldata/gsx-in-the-wild-4.xml b/tests/vmx2xmldata/gsx-in-the-wild-4.xml index a65a7d137f..8c73224846 100644 --- a/tests/vmx2xmldata/gsx-in-the-wild-4.xml +++ b/tests/vmx2xmldata/gsx-in-the-wild-4.xml @@ -6,6 +6,7 @@ <vcpu placement='static'>1</vcpu> <os> <type arch='i686'>hvm</type> + <nvram>[datastore] directory/Debian-System4.nvram</nvram> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> -- 2.53.0

3 3

[PATCH] ZFS: fix incorrect volsize,refreservation on zvol creation
by George Melikov 03 May '26

03 May '26

From: George Melikov <mail(a)gmelikov.ru> Reproduce: ```bash # Order is crucial here, if we create zvol with name which won't be last - we'll get size from different zvol root@minime:~# virsh vol-list rpool Name Path ---------------------------------------------------------------------------------------------------- da52bdd9-eb75-5746-a2ce-a511067914f5 /dev/zvol/rpool/disks/da52bdd9-eb75-5746-a2ce-a511067914f5 faafd0f9-33c8-5b23-990c-fa7b4bfe8dcf /dev/zvol/rpool/disks/faafd0f9-33c8-5b23-990c-fa7b4bfe8dcf # Create zvol with name which will be before `faaf...` root@minime:~# cat > /tmp/vol <volume> <name>eeee</name> <capacity>4294967296</capacity> <allocation>4294967296</allocation> </volume> root@minime:~# virsh vol-create rpool /tmp/vol Vol eeee created from /tmp/vol root@minime:~# virsh vol-list rpool Name Path ---------------------------------------------------------------------------------------------------- da52bdd9-eb75-5746-a2ce-a511067914f5 /dev/zvol/rpool/disks/da52bdd9-eb75-5746-a2ce-a511067914f5 eeee /dev/zvol/rpool/disks/eeee faafd0f9-33c8-5b23-990c-fa7b4bfe8dcf /dev/zvol/rpool/disks/faafd0f9-33c8-5b23-990c-fa7b4bfe8dcf # Here we've got Capacity from last zvol (ordered by name) root@minime:~# virsh vol-info --pool rpool eeee Name: eeee Type: block Capacity: 10.00 GiB Allocation: 0.00 B # Full refresh fixes it root@minime:~# virsh pool-refresh --pool rpool Pool rpool refreshed root@minime:~# virsh vol-info --pool rpool eeee Name: eeee Type: block Capacity: 4.00 GiB Allocation: 4.06 GiB ``` Fix is trivial: check zvol by name and return early if this is different zvol. Signed-off-by: George Melikov <mail(a)gmelikov.ru> --- src/storage/storage_backend_zfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/storage/storage_backend_zfs.c b/src/storage/storage_backend_zfs.c index 33434d0cac..2cb555a6e6 100644 --- a/src/storage/storage_backend_zfs.c +++ b/src/storage/storage_backend_zfs.c @@ -132,8 +132,10 @@ virStorageBackendZFSParseVol(virStoragePoolObj *pool, if (vol == NULL) volume = virStorageVolDefFindByName(pool, vol_name); - else + else if (STREQ(vol_name, vol->name)) volume = vol; + else + return 0; if (volume == NULL) { volume = g_new0(virStorageVolDef, 1); -- 2.53.0

2 1

[PATCH 0/4] Fix vcpu stats present for inactive VMs and allow virsh completion while daemon is down
by Peter Krempa 30 Apr '26

30 Apr '26

Two things that annoyed me while I tried to reply to a mail. Peter Krempa (4): qemuDomainGetStatsCpuProc: Don't fetch stats for inactive VMs virProcessGetStatInfo: Improve debug message vsh: Suppress attempts to write to stderr when it was closed in 'cmdComplete' vsh: cmdComplete: Don't exit when connecting to the daemon fails src/qemu/qemu_driver.c | 3 +++ src/util/virprocess.c | 4 ++-- tools/vsh.c | 12 ++++++++++-- tools/vsh.h | 2 ++ 4 files changed, 17 insertions(+), 4 deletions(-) -- 2.54.0

2 6

Entering freeze for libvirt-12.3.0
by Jiri Denemark 29 Apr '26

29 Apr '26

I have just tagged v12.3.0-rc1 in the repository and pushed signed tarballs to https://download.libvirt.org/ Please give the release candidate some testing and in case you find a serious issue which should have a fix in the upcoming release, feel free to reply to this thread to make sure the issue is more visible. If you have not done so yet, please update NEWS.rst to document any significant change you made since the last release. Jirka

1 1

[PATCH] NEWS: multi pci root bus complex support
by ehanoc 29 Apr '26

29 Apr '26

From: Bruno Martins <ehanoc(a)protonmail.com> Signed-off-by: Bruno Martins <ehanoc(a)protonmail.com> --- NEWS.rst | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/NEWS.rst b/NEWS.rst index 56e344776b..65a8388607 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -41,6 +41,13 @@ v12.3.0 (unreleased) * **Improvements** + * Allow for multiple PCI root buses, not just for a single one numbered '0' + + `virPCIDeviceReset()` and `virPCIDeviceIsBehindSwitchLackingACS()` no longer + use a hardcoded check (e.g bus == 0 ) to determine if a device is attached + to a "root bus". This allows for better support on more complex PCI topologies. + + * **Bug fixes** -- 2.47.3

3 2