- Users - libvirt List Archives

[libvirt-users] problem with nwfilter direction='out'
by Stephan Sachse 20 Feb '14

20 Feb '14

i test the following simple filter <filter name='nwfilter-test-fedora2' chain='root'> <uuid>ccbd255f-4be5-4f0f-8835-770ea40cb2c9</uuid> <rule action='accept' direction='out' priority='500'> <tcp dstipaddr='10.1.24.0' dstipmask='24' comment='test test test'/> </rule> </filter> but i get strange results (look at the attached output of iptables-save) for me it looks like the direction='out' filters are attached to every chain for this domain. additional there are wrong conntrack, state and ctdir matches. is this a bug or my fault? /stephan -- Software is like sex, it's better when it's free!

1 1

[libvirt-users] Networkfilters in Routed setup
by h0rst 20 Feb '14

20 Feb '14

Hello! Since i could not find any information on the internet about this subject, i'm going to try my luck on this list. I'm trying to setup network-filter on a routed setup. I have a root-server at Hetzner, a german hosting provider. Along with my server i ordered a (/28) subnet to be able to setup dedicated IPs for my virtual machines (KVM). My Server is running Ubuntu 12.04 with libvirt 0.9.8 . Since Hetzner does not allow any bridged traffic, i had to setup a routed network. Currently my (via libvirt) defined network looks like this: (lets assume my subnet is 1.2.3.64/28): <network> <name>hetzner-subnet-v4</name> <forward dev='eth0' mode='route'> <interface dev='eth0'/> </forward> <bridge name='route-br0' stp='off' delay='0' /> <mac address='52:54:00:F0:D0:AA'/> <ip address='1.2.3.65' netmask='255.255.255.240'></ip> </network> The network definition for all running VMs looks like this: <interface type='network'> <mac address='52:54:00:00:00:##'/> <source network='hetzner-subnet-v4'/> </interface> Without using Network-Filters, this setup is running as expected. All traffic is correctly forwarded to my virtual machines connected to "route-br0" and the following iptables-rules are created in the FORWARD Chain: Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) target prot opt in out source destination ACCEPT all -- eth0 route-br0 0.0.0.0/0 1.2.3.64/28 ACCEPT all -- route-br0 eth0 1.2.3.64/28 0.0.0.0/0 ACCEPT all -- route-br0 route-br0 0.0.0.0/0 0.0.0.0/0 REJECT all -- * route-br0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable REJECT all -- route-br0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable When i try to setup a network-filter for a VM (a modified version of http://libvirt.org/formatnwfilter.html last example): <filter name='server-x' chain='root'> <filterref filter='clean-traffic'/> <rule action='accept' direction='in' priority='500'> <all state='ESTABLISHED'/> </rule> <rule action='accept' direction='out' priority='500'> <all state='ESTABLISHED,RELATED'/> </rule> <rule action='accept' direction='in' priority='500'> <tcp state='NEW' dstportstart='22'/> </rule> <rule action='accept' direction='out' priority='500'> <all state='NEW'/> </rule> <rule action='drop' direction='inout' priority='500'> <all/> </rule> </filter> and adding the filter to my interface-definition of a VM using the following syntax: <filterref filter='server-x'> <parameter name='IP' value='1.2.3.70'/> </filterref> additional iptable-rules are getting created. The problematic rule seems to be the following: -A libvirt-out -m physdev --physdev-out vnetX -g FO-vnetX which should trigger the following rules: -A FO-vnetX -p all -m state --state ESTABLISHED -j ACCEPT -A FO-vnetX -p tcp --dport 22 -m state --state NEW -j ACCEPT But this actually never happens. The FO-vnetX Chain never sees any packets and my syslog says: xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore Am i doing something wrong? I hope i did not write too much useless stuff here. I'm tried to figure it all out by myself, but im currently stuck. Lets hope some wise guys can help me out here. Maybe there is some documentation i have missed? Thanks! kind regards, Sebastian

3 6

[libvirt-users] Errors with ESX driver & floppy0.filename
by Phil Mayers 20 Feb '14

20 Feb '14

We're getting the following error with one or two ESX VMs using libvirt; I'm only trying to read the domain config here, not make changes: libvir: error : internal error Invalid or not yet handled value 'Floppy drive 1' for VMX entry 'floppy0.fileName' Is there a way I can tell it to ignore unknown stuff?

1 0

[libvirt-users] Right way to do SAN-based shared storage?
by urgrue 19 Feb '14

19 Feb '14

I'm trying to set up SAN-based shared storage in KVM, key word being "shared" across multiple KVM servers for a) live migration and b) clustering purposes. But it's surprisingly sparsely documented. For starters, what type of pool should I be using?

3 3

[libvirt-users] Error when building from source
by arnaud gaboury 19 Feb '14

19 Feb '14

Hi all, I can not build from source since a few days. Make left me with this error: Making install in tools/wireshark make[1]: Entering directory '/developement/aur/libvirt-git/src/libvirt/tools/wireshark' make[2]: Entering directory '/developement/aur/libvirt-git/src/libvirt/tools/wireshark' make[3]: Entering directory '/developement/aur/libvirt-git/src/libvirt/tools/wireshark' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/developement/aur/libvirt-git/src/libvirt/tools/wireshark' make[2]: Leaving directory '/developement/aur/libvirt-git/src/libvirt/tools/wireshark' make[1]: Leaving directory '/developement/aur/libvirt-git/src/libvirt/tools/wireshark' mv: cannot stat ‘/developement/aur/libvirt-git/pkg/libvirt-git/lib/*’: No such file or directory I am on Arch linux and use the AUR mechanism package to build/install packages from source. Here is the build part of the PKGBUILD file : build() { cd "$srcdir/libvirt" export LDFLAGS=-lX11 export RADVD=/usr/bin/radvd ./autogen.sh #./configure --prefix=/usr --libexec=/usr/lib/"$pkgname" --sbindir=/usr/bin \ ./configure --prefix=/usr --libexec=/usr/lib/"${pkgname/-git/}" --sbindir=/usr/bin \ --with-storage-lvm --without-xen --with-udev --without-hal --disable-static \ --with-init-script=systemd --with-audit \ --with-qemu-user=nobody --with-qemu-group=nobody \ --without-netcf --with-interface Thank you for help.

2 1

[libvirt-users] lxc state driver is not active
by Tom Taylor 18 Feb '14

18 Feb '14

So I've followed this tutorial on a vanilla CentOS 6.5 (x64) hardware install ... http://wiki.centos.org/HowTos/LXC-on-CentOS6 (barring the name and location of the container) I'm getting the following error when trying to intialise the container ... # virt-install --connect lxc:/// --name dns --ram 512 --vcpu 1 --filesystem /srv/lxc/dns,/ --noautoconsole ERROR internal error lxc state driver is not active Does this howto miss a step somewhere? Is something in the CentOS distribution broken? # rpm -qa | egrep 'lxc|libvirt' lxc-0.9.0-2.el6.x86_64 libvirt-python-0.10.2-29.el6_5.3.x86_64 lxc-libs-0.9.0-2.el6.x86_64 libvirt-client-0.10.2-29.el6_5.3.x86_64 libvirt-0.10.2-29.el6_5.3.x86_64 lxc-templates-0.9.0-2.el6.x86_64 Thanks Tom Taylor

1 0

[libvirt-users] libvirtd ssl configuration
by Гусев Павел 18 Feb '14

18 Feb '14

Hi! I found little semantics bug: [13:53:40] root@dedicated-04:~ # LC_ALL=C libvirtd -h libvirtd: invalid option -- 'h' Usage: libvirtd [options] Options: -v | --verbose Verbose messages. -d | --daemon Run as a daemon & write PID file. -l | --listen Listen for TCP/IP connections. -t | --timeout <secs> Exit after timeout period. -f | --config <file> Configuration file. | --version Display version information. -p | --pid-file <file> Change name of PID file. libvirt management daemon: Default paths: Configuration file (unless overridden by -f): /etc/libvirt/libvirtd.conf Sockets: /var/run/libvirt/libvirt-sock /var/run/libvirt/libvirt-sock-ro TLS: CA certificate: /etc/pki/CA/caert.pem Server certificate: /etc/pki/libvirt/servercert.pem Server private key: /etc/pki/libvirt/private/serverkey.pem PID file (unless overridden by -p): /var/run/libvirtd.pid I think that caert.pem should be cacert.pem =) Tnx. С уважением, Гусев Павел Руководитель отдела системного администрирования QSOFT | Ведущий web-интегратор офис 7(495) 771-7363 #110 | моб. 7(926) 850-1108 pgusev(a)qsoft.ru Москва, Авангардная улица, 3 | qsoft.ru San Francisco, 222 Columbus Ave | qsoftus.com

2 2

[libvirt-users] tftp server inside a container ?
by Thomas Elsgaard 16 Feb '14

16 Feb '14

Hi list I am trying to understand the containers in red hat 7, and i have following questions: 1) Would it be possible to run an tftp server inside an container ? 2) Can i have containers binding to vlans on the host, so that i can have containers with overlapping IP networks, but in different vlans ? What i am trying to achieve is 10 containers with an tftp server inside, where the containers are on isolated IP networks via vlans. Thomas

1 0

[libvirt-users] lxc and cgroups
by arnaud gaboury 15 Feb '14

15 Feb '14

Dear list, I am bulding a VM using libvirt and lxc for linux container. I have an issue with my cgroups settings: gabx@hortensia ➤➤ ~ # virsh start dahlia error: Failed to start domain dahlia error: internal error: No valid cgroup for machine dahlia My environement: Host : Arch Linux - systemd 208-11, libvirt 1.2.1-4 guest : Arch Linux , machine name : dahlia , /etc/libvirt/lxc/dahlia.xml , mounted in /machine/dahlia My set up so far : - gabx@hortensia ➤➤ ~ % sudo virsh uri [sudo] password for root: lxc:/// - gabx@hortensia ➤➤ ~ # virsh -c lxc:/// list --all Id Name State ---------------------------------------------------- - dahlia shut off - custom kernel with user space set gabx@hortensia ➤➤ ~ % zgrep USER_NS /proc/config.gz CONFIG_USER_NS=y - /etc/libvirt/lxc/dahlia.xml $ ls -al -rw------- 1 root root 1.1K Feb 15 12:11 /etc/libvirt/lxc/dahlia.xml $ cat <domain type='lxc'> <name>dahlia</name> <uuid>a34b58db-894f-4f4a-81f0-b13d2d5d7732</uuid> <memory unit='KiB'>409600</memory> <currentMemory unit='KiB'>409600</currentMemory> <vcpu placement='static'>1</vcpu> <resource> <partition>/machine/dahlia</partition> </resource> <os> <type arch='x86_64'>exe</type> <init>/bin/init</init> </os> <idmap> <uid start='0' target='1000' count='10'/> <gid start='0' target='1000' count='10'/> </idmap> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/lib/libvirt/libvirt_lxc</emulator> <interface type='network'> <mac address='52:54:00:89:8f:1a'/> <source network='default'/> </interface> <console type='pty'> <target type='lxc' port='0'/> </console> </devices> </domain> - fstab : UUID=f69d032f-c80f-4f2e-84cd-d2328a862818 /machine/dahlia ext4 defaults,relatime,discard 0 1 $ ls -al drwxr-xr-x 17 root root 4.0K Feb 11 21:41 dahlia/ - /etc/cgconfig: group dahlia { perm { # who can manage limits admin { uid = 1000; gid = 1004; } # who can add task task { uid = 1000; gid = 1004; } } # create this group in the controllers cpu { } cpuset { } memory { } devices { } freezer { } net_cls { } blkio { } } - /etc/cgrules is deafult one, so everything is commented. Maybe shall I edit a line ?? - gabx@hortensia ➤➤ ~ # cat /proc/cgroups #subsys_name hierarchy num_cgroups enabled cpuset 3 5 1 cpu 4 4 1 cpuacct 4 4 1 memory 5 5 1 devices 6 4 1 freezer 7 5 1 net_cls 8 5 1 blkio 9 4 1 Something puzzles me. In /sys/fs/cgroup/blkio, I see two dirs: dahlia and machine.slice. Inside machine.slice, I see another dir machine-dahlia. I guess there is something wrong here !! Same for cpuset or other controllers. - gabx@hortensia ➤➤ ~ % systemctl status machine-dahlia.slice machine-dahlia.slice - dahlia VM slice Loaded: loaded (/etc/systemd/system/machine-dahlia.slice; static) Active: active since Sat 2014-02-15 11:53:01 CET; 15min ago Feb 15 11:53:01 hortensia systemd[1]: Starting dahlia VM slice. Feb 15 11:53:01 hortensia systemd[1]: Created slice dahlia VM slice. My systemd unit file machine-dahlia.slice in /etc/systemd/system Apologize for the long post, but I wanted to detail everything. Thank you for help on my cgroup set up.

1 2

[libvirt-users] libvirt crashes with Caught Segmentation violation
by Minami Katsumata 14 Feb '14

14 Feb '14

Hi, I'm having problems with libvirt crashing after a couple hours when a specific domain monitoring program is running. I have pasted below the following: 1. libvirt version 2. qemu-kvm version 3. OS version 4. Kernel version 5. libvirt status post-crash 6. libvirtd.log (info level dump around crash; too long to post everything so just the beginning and end. UTC) 7. custom.log (on what this domain monitoring program was doing around the time of the crash. JST) 8. FYI on the program being executed 9. other related server settings Please, if anyone can look through these and give some insight as to what is causing libvirt to crash, that would be greatly appreciated. 1.) libvirt version: # rpm -q libvirt libvirt-0.9.10-21.el6.x86_64 2.) qemu-kvm version: qemu-kvm-0.12.1.2-3.295.el6.10.x86_64 3.) OS version: # cat /etc/redhat-release CentOS release 6.3 (Final) 4.) Kernel version: # uname -r 2.6.32-279.22.1.el6.x86_64 5.) libvirt status after crash: # service libvirtd status libvirtd dead but pid file exists 6.) libvirtd.log 2014-02-06 10:25:05.173+0000: 1187: info : remoteDispatchAuthList:2091 : Bypass polkit auth for privileged client pid:58626,uid:0 2014-02-06 10:25:05.237+0000: 1184: info : remoteDispatchAuthList:2091 : Bypass polkit auth for privileged client pid:58636,uid:0 2014-02-06 10:25:05.271+0000: 1185: info : remoteDispatchAuthList:2091 : Bypass polkit auth for privileged client pid:58646,uid:0 2014-02-06 10:25:05.301+0000: 1184: info : remoteDispatchAuthList:2091 : Bypass polkit auth for privileged client pid:58648,uid:0 2014-02-06 10:25:05.400+0000: 1184: info : remoteDispatchAuthList:2091 : Bypass polkit auth for privileged client pid:58650,uid:0 Caught Segmentation violation dumping internal log buffer: ====== start of log ===== ^(a)05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=19 w=21, f=32 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=20 w=22, f=34 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=21 w=23, f=33 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=22 w=24, f=36 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=23 w=25, f=38 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=24 w=26, f=39 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=25 w=27, f=41 e=25 d=0 2014-02-06 10:25:05.412+00001182: debug : virEventPollMakePollFDs:383 : Prepare n=26 w=28, f=40 e=25 d=0 (cut out due to length) 2014-02-06 10:25:05.423+00001182: debug : virEventPollDispatchHandles:488 : EVENT_POLL_DISPATCH_HANDLE: watch=2791 events=2 2014-02-06 10:25:05.423+00001182: debug : virNetMessageFree:75 : msg=0x2326a20 nfds=0 cb=(nil) 2014-02-06 10:25:05.423+00001182: debug : virNetServerClientCalculateHandleMode:137 : tls=(nil) hs=-1, rx=0x2266390 tx=(nil) 2014-02-06 10:25:05.423+00001182: debug : virNetServerClientCalculateHandleMode:167 : mode=1 2014-02-06 10:25:05.423+00001182: debug : virEventPollUpdateHandle:151 : EVENT_POLL_UPDATE_HANDLE: watch=2791 events=1 2014-02-06 10:25:05.423+00001182: debug : virEventPollInterruptLocked:702 : Skip interrupt, 1 -1675536288 2014-02-06 10:25:05.423+00001182: debug : virEventPollDispatchHandles:474 : i=33 w=2793 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupTimeouts:506 : Cleanup 12 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupHandles:554 : Cleanup 34 2014-02-06 10:25:05.423+00001182: debug : virNetServerClientClose:632 : client=0x22e6860 refs=3 2014-02-06 10:25:05.423+00001182: debug : virKeepAliveStop:382 : RPC_KEEPALIVE_STOP: ka=0x225bf20 client=0x22e6860 2014-02-06 10:25:05.423+00001182: debug : virEventPollRemoveTimeout:293 : EVENT_POLL_REMOVE_TIMEOUT: timer=8290 2014-02-06 10:25:05.423+00001182: debug : virEventPollInterruptLocked:702 : Skip interrupt, 0 -1675536288 2014-02-06 10:25:05.423+00001182: debug : virEventPollRemoveTimeout:293 : EVENT_POLL_REMOVE_TIMEOUT: timer=8289 2014-02-06 10:25:05.423+00001182: debug : virEventPollInterruptLocked:702 : Skip interrupt, 0 -1675536288 2014-02-06 10:25:05.423+00001182: debug : virKeepAliveFree:304 : RPC_KEEPALIVE_FREE: ka=0x225bf20 client=0x22e6860 refs=3 2014-02-06 10:25:05.423+00001182: debug : daemonRemoveAllClientStreams:493 : stream=(nil) 2014-02-06 10:25:05.423+00001182: debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2791 2014-02-06 10:25:05.423+00001182: debug : virEventPollRemoveHandle:193 : mark delete 32 50 2014-02-06 10:25:05.423+00001182: debug : virEventPollInterruptLocked:702 : Skip interrupt, 0 -1675536288 2014-02-06 10:25:05.423+00001182: debug : virNetMessageFree:75 : msg=0x2266390 nfds=0 cb=(nil) 2014-02-06 10:25:05.423+00001182: debug : virNetSocketFree:722 : RPC_SOCKET_FREE: sock=0x22e66a0 refs=2 2014-02-06 10:25:05.423+00001182: debug : virNetServerClientFree:591 : RPC_SERVER_CLIENT_FREE: client=0x22e6860 refs=3 2014-02-06 10:25:05.423+00001182: debug : virEventRunDefaultImpl:244 : running default event implementation 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupTimeouts:506 : Cleanup 12 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupTimeouts:519 : EVENT_POLL_PURGE_TIMEOUT: timer=8289 2014-02-06 10:25:05.423+00001182: debug : virKeepAliveFree:304 : RPC_KEEPALIVE_FREE: ka=0x225bf20 client=0x22e6860 refs=2 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupTimeouts:519 : EVENT_POLL_PURGE_TIMEOUT: timer=8290 2014-02-06 10:25:05.423+00001182: debug : virKeepAliveFree:304 : RPC_KEEPALIVE_FREE: ka=0x225bf20 client=0x22e6860 refs=1 2014-02-06 10:25:05.423+00001182: debug : virNetServerClientFree:591 : RPC_SERVER_CLIENT_FREE: client=0x22e6860 refs=2 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupHandles:554 : Cleanup 34 2014-02-06 10:25:05.423+00001182: debug : virEventPollCleanupHandles:567 : EVENT_POLL_PURGE_HANDLE: watch=2791 2014-02-06 10:25:05.423+00001182: debug : virNetServerClientFree:591 : RPC_SERVER_CLIENT_FREE: client=0x22e6860 refs=1 2014-02-06 10:25:05.423+00001182: debug : virConnectClose:1462 : conn=0x7f1b380c4630 2014-02-06 10:25:05.423+00001182: debug : virUnrefConnect:145 : unref connection 0x7f1b380c4630 1 2014-02-06 10:25:05.423+00001182: debug : virReleaseConnect:94 : release connection 0x7f1b380c4630 ====== end of log ===== 7.) custom.log Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh domifstat i-8-114-VM Interf ace Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh domifstat i-8-114-VM vnet4 Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh list --all Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh domiflist i-8-114-VM Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh domifstat i-8-114-VM Interf ace Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh domifstat i-8-114-VM vnet4 Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh list --all Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh list --all Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so Feb 6 19:25:05 jp7-rk90000 [authpriv.notice] sudo: zabbix : TTY=unknown ; PWD=/etc/zabbix/sender_scripts/compute ; USER=root ; COMMAND=/usr/bin/virsh list --all Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM unable to dlopen(/lib64/security/pam_fprintd.so): /lib64/security/pam_fprintd.so: cannot open shared object file: No such file or directory Feb 6 19:25:05 jp7-rk90000 [authpriv.err] sudo: PAM adding faulty module: /lib64/security/pam_fprintd.so 8.) FYI on this program: This program consists of three main scripts that are run via cron. 2 run every 5 minutes, and 1 runs every minute. The two scripts that are executed every 5 minutes rely heavily on the virsh command. However, it is made so that the simultaneous number of connections to libvirt is not too large; the max number of libvirt-sock connections at any given moment does not go over 6. As it is a domain monitoring program, it only executes the following virsh commands: virsh list --all virsh dominfo virsh domblklist virsh domblkstat virsh domiflist virsh domifstat 9.) other related server settings 9-1) user resource limits [root@ ~]# ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 773493 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 32768 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited 9-2) libvirtd.conf The following settings have been changed: #max_clients = 20 max_clients = 250 #max_workers = 20 max_workers = 250 #max_requests = 20 max_requests = 250 Regards, Minami

2 2