- Users - libvirt List Archives

[libvirt-users] (no subject)
by Abhishek Gupta 15 May '11

15 May '11

Hello, I am using python bindings of libvirt. When I use the function listDomainsID( ) it successfully returns me the list of the ids of my current virtual machines, but when I call function listDefinedDomains( ) it returns me an empty list. Is this some kind of bug because as per my understanding listDefinedDomains should return a superset of vm's as returned by listDefinedDomains(). I am using 0.8.8 version of the libvirt. -- Thanks Abhishek

2 2

Re: [libvirt-users] Problem after restarting libvirt
by Nikita A Menkovich 15 May '11

15 May '11

I could not find that cgroups are not persistent now. And there is no such information in changelog. Could you show me commit where it was changed? On 9 May 2011 15:50, Nikita A Menkovich <menkovich(a)gmail.com> wrote: > It is really bad. Ok, I will write a script, that will set up cgroups > for every domain. > > On 9 May 2011 10:44, Osier Yang <jyang(a)redhat.com> wrote: >> 于 2011年05月05日 21:32, Nikita A Menkovich 写道: >>> >>> After restarting libvirt cgroups for VMs are not recovered. >>> Is there available to restore cgroup state after restart? >>> >> except "cpu.shares" (Since 0.9.0), all other cgroup related stuffs >> have no persistent XML yet, so they can't be recovered. >> >> Regards >> Osier >> > > > > -- > Nikita A Menkovich > http://libc6.org/ > JID: menkovich(a)gmail.com > Tel: +7 (921) 423-96-48 > -- Nikita A Menkovich http://libc6.org/ JID: menkovich(a)gmail.com Tel: +7 (921) 423-96-48

2 1

[libvirt-users] Booting from scsi
by bhasker＠unixindia.com 14 May '11

14 May '11

Hi all, I am starting up to use libvirt with virsh and virt-install. I used virt-install successfully and have a running linux system with raw disk exported to the virtual machine as scsi. (the whole of qemu + libvirt + virtmanager is compiled and installed on /usr/local from source) After the virtual OS installation (which succeeds) I am not able to boot into the OS from the harddisk. Following are some excerpts from my xml file. Please get back to me if you need any more information <os> <type arch='x86_64' machine='pc-0.14'>hvm</type> <boot dev='hd'/> <bootmenu enable='yes'/> </os> I also tried removing the boot parametes from <os> and added <boot order='1'/> in the scsi disk section. Still I am not able to use the scsi disk to boot (my qemu-system-x86_64 however has the boot=on option) <disk type='block' device='disk'> <driver name='qemu' type='raw'/> <source dev='/dev/venkatb1/deb'/> <target dev='sda' bus='scsi'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> I could not find any more information or any posts where someone else had faced this issue. I presume I am doing something wrong here. Can someone help please ? thanks Bhasker C V

1 1

[libvirt-users] Problems using virt-install to create KVM CentOS 5.6 guest
by Emmanuel Noobadmin 13 May '11

13 May '11

I was having problems creating a KVM CentOS 5.6 Initially the host was CentOS 5.6 but I switched to Scientific Linux 6 during the process of trying to solve it. I was able to install a working guest in the end by manually writing an XML and using virsh. However, as it shouldn't be so complicated, Gleb over at the KVM list asked me to share this with the libvirtd ML. I don't know it's an old bug, since current libvirt seems to be several sub-versions ahead of mine so decided to post to the user list first in case it's a known bug. Hopefully somebody will be able to pinpoint what went wrong. Host system: SL 6.0 with libvirtd (libvirt) 0.8.1 Network: 2 physical NICs, eth0 bridged to br0 for WAN connectivity, eth1 is for internal use Installation medium: CentOS 5.6 DVD ISO Original problem virt-install would simply not work, I get a blank console with nothing happening and qemu-kvm will be 100% load on one core. This was eventually traced to virt-install not being able to mount/use the ISO. Mounting the ISO as loopback allowed the installation to proceed. However, the guest was not able to see the installation "cdrom". With httpd running off the host, and tested accessibly via Internet, a network install did not work either. After much frustration, I followed the documentation at libvirt website to write my own XML file. The result of this was the discovery that 1. permissions on initrd.img and vmlinux was not allowing virsh access - copying these files to disk and adjusting the xml allowed installation to proceed. virt-install appears to do this on the fly. 2. virt-install guest could not see any disk. The anaconda installer could not find any CDROM or hard disk. - Part of the problem seems to be that virt-install did not save the source for the installation medium, the generated XML did not have the source information under the <disk> element. I specified this in my manual XML and the CentOS guest was able to see the "cdrom" and install properly. As I did not have any problem with missing hard disks with my manually written XML so I'm not sure what went wrong with virt-install's 3. Can't install via network - This was traced to networking not working at all. Even in my manual XML, networking did not work although the guest could install from the disk. Eventually, this was solved by adding the <model type='virtio' /> to the device definition.

1 1

[libvirt-users] point-to-point connection between vm and host
by Jorge Somavilla 12 May '11

12 May '11

Hi! hopefully someone can give me a hint with this: I need to create a vm with a point-to-point connection to the host using a /30 subnet. Right now i have this in the vm's xml for libvirt: <interface type="network" name="eth0" onboot="yes"> <source network="default"/> <mac address="02:fd:00:00:01:00"/> </interface> Which brings up an interface in the vm that is configured later by a a daemon, getting to this: vnx@r2:~$ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 02:fd:00:00:01:00 inet addr:10.250.0.2 Bcast:10.250.0.3 Mask:255.255.255.252 While in the host the other interface is created: root@tau:/home/jorge/workspace/vnx# ifconfig r2-e0 r2-e0 Link encap:Ethernet HWaddr 0a:81:b6:3c:24:15 inet addr:10.250.0.1 Bcast:10.250.0.3 Mask:255.255.255.252 However there is no connectivity between them, probably because of some mistake in the <interface> tag, perhaps a wrong 'type' attribute, but i haven't found out yet. I wouldn't want to create a bridge and connect both interfaces (vm's and host's) to the bridge, but to have this ptp, if possible. How would i go about doing that? thanks! Jorge

2 3

[libvirt-users] blkio issue
by Nikita A Menkovich 12 May '11

12 May '11

When I run virsh blkiotune alias --weight 100 I receive: error: Unable to change blkio parameters error: this function is not supported by the connection driver: blkio cgroup isn't mounted But I have mounted blkio: cgroup /dev/cgroup/cpu cgroup rw,relatime,cpu 0 0 cgroup /dev/cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0 cgroup /dev/cgroup/devices cgroup rw,relatime,devices 0 0 cgroup /dev/cgroup/blkio cgroup rw,relatime,blkio 0 0 cgroup /dev/cgroup/freezer cgroup rw,relatime,freezer 0 0 cgroup /dev/cgroup/cpuset cgroup rw,relatime,cpuset 0 0 why it is not worked? -- Nikita A Menkovich http://libc6.org/ JID: menkovich(a)gmail.com Tel: +7 (921) 423-96-48

1 0

[libvirt-users] Problems connecting to Virtualbox hypervisor using libvirt java binding
by Tarciso Oliveira 12 May '11

12 May '11

I am trying to connect to the virtualbox hypervisor through libvirt java binding. I am on Ubuntu 10.04 and I have installed libvirt-0.85, libvirt-java-0.4.6 and virtualbox-ose-dkms. I have configured libvirt project and its java binding at Eclipse and the default test of the binding runs properly. When I try to run a simple test in java with the connection: conn = new Connect("vbox:///session", false) I get the following exception: "exception caught:org.libvirt. LibvirtException: Failed to start the nwfilter driver: Is the daemon running ?" If I try to do the same thing, but instead of using the java biding I use virsh, it works. I am able to connect and start the virtual machine successfully, although none of the nwfilter commands work in virsh. (The nwfilter-list command shows this error: Failed to list network filters. This function is not supported by the connection driver: virConnectNumOfNWFilters) If I run the same java test using the Test hypervisor connection, things work properly. I don't know if I have to install or configure something else in order to get the nwfilter working or if virtualbox doesn't provide support for it, and if it doesn't provide, how can I get rid of this exception and use virtualbox virtual machine connection through java binding ? My objective is being able to use libvirt library commands in a software (in java) which uses virtualization to run jobs in different machines, but without the connection to the hypervisor I can't do anything. I apologize if this question has been already answered. I have tried hard to get the answers for it looking at forums and also in the discussions of this list, but I couldn't. What am I missing? Thanks! -- Tarciso Braz de Oliveira Filho Graduando em Ciência da Computação LSD - Laboratório de Sistemas Distribuídos UFCG 2011

2 1

[libvirt-users] Logfile with domain states
by s.b＠post.com 11 May '11

11 May '11

Hi, Is there any logfile where I can find information about startup, shutdown, etc of domains virtual machines (domains)? Thanks, Stef

2 1

[libvirt-users] Audio pass through
by Mike Hall 10 May '11

10 May '11

I'm running a RHEL6 as a development desktop with Fedora 14 (multimedia stuff) and Win XP (corporate email and calendars) running on it as KVM VMs. Everything runs great except for audio pass through. Audio works on the RHEL host. Both VMs see sound cards provided by the VM, but no sound is forthcoming. I have tried adding a PCI audio device from the physical host to the Fedora VM, but then it refuses to boot. I remember reading that physical hardware can only be passed through to VMs if it is not in use on the physical host. Any suggestions on how to get audio pass through happening? How can I get the host to "relinquish" the audio device so that a VM can use it? Thanks Michael Hall IT Communications Officer Alice Springs Town Council mhall(a)astc.nt.gov.au (08) 8950 0561

3 2

[libvirt-users] Problem after restarting libvirt
by Nikita A Menkovich 09 May '11

09 May '11

After restarting libvirt cgroups for VMs are not recovered. Is there available to restore cgroup state after restart? -- Nikita A Menkovich http://libc6.org/ JID: menkovich(a)gmail.com Tel: +7 (921) 423-96-48

2 1