- Users - libvirt List Archives

[libvirt-users] Xm driver only supports modifying persistent config.
by zhuxuegang 05 Jul '11

05 Jul '11

Dear all. I use libvirt to attach a volume to xen's guest VM,but l got the following message: Attached device: /dev/sdb [Mon Jul 4 09:18:58 2011][006640][EUCAERROR ] libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) [Mon Jul 4 09:18:58 2011][006640][EUCAERROR ] AttachVolume() failed (err=-1) XML=<disk type='block'><driver name='phy'/><source dev='/dev/sdb'/><target dev='sdae'/></d isk> [Mon Jul 4 09:18:58 2011][006640][EUCAERROR ] ERROR: doAttachVolume() failed error=1 [Mon Jul 4 09:19:02 2011][006640][EUCADEBUG ] doDescribeResource() invoked [Mon Jul 4 09:19:02 2011][006640][EUCADEBUG ] doDescribeInstances() invoked any help will be greatly appreciated. Thank you in advance... 2011-07-05 zhuxuegang

1 0

[libvirt-users] Helping on libvirt
by negar behinaeen 03 Jul '11

03 Jul '11

*Writting myVirt* ------------------------------ Dear all, I'm new in libvirt. I would be glad if you help me. I want to write a program for controlling all libvirt servers named "MYVIRT". The libvirtd works as fallow: { CLIENT } ---------------------> { SERVER A } | | ------------------------------> { SERVER B } Now, I want to place MYVIRT between client and libvirtd servers. By calling a command, MYVIRT should execute the command for all servers. { CLIENT } | | { MYVIRT } ---------------------> { SERVER A } | | ------------------------------> { SERVER B } The client softwares for libvirtd are virsh and virt-manager. Now I want them to connect to MYVIRT and look it as a libvirtd server. Would you please guide me for connecting to MYVIRT through virsh and execute a command on all servers?

1 0

[libvirt-users] Unable to boot from a vdi image
by yeswanth swami 03 Jul '11

03 Jul '11

Hi, I am not able to boot a vdi image on virtualbox using libvirt .It keeps showing me "Bootable medium not found". I have tried booting it manually with virtualbox GUI and it boots without any problem. May there is some problem with my libvirt domain XML . I also realized on some investigation that it is not detecting the vdi image file as a hard disk (when i am booting from a live cd) A part of my libvirt domain XML is here: <os> <type>hvm</type> <boot dev='hd'/> </os> ------------------------------ <devices> <disk type='file' device='disk'> <source file='disk.vdi'/> <target dev='hdd' bus='ide'/> </disk> </devices> Thanks for replying -- Cheers, Yeswanth

1 0

[libvirt-users] [PATCH] Use correct param names in Product getters
by Zeeshan Ali (Khattak) 01 Jul '11

01 Jul '11

From: "Zeeshan Ali (Khattak)" <zeeshanak(a)gnome.org> --- osinfo/osinfo_product.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/osinfo/osinfo_product.c b/osinfo/osinfo_product.c index 89e01bd..bbbcf67 100644 --- a/osinfo/osinfo_product.c +++ b/osinfo/osinfo_product.c @@ -158,15 +158,15 @@ void osinfo_product_add_related(OsinfoProduct *product, OsinfoProductRelationshi const gchar *osinfo_product_get_vendor(OsinfoProduct *prod) { - return osinfo_entity_get_param_value(OSINFO_ENTITY(prod), OSINFO_PRODUCT_PROP_NAME); + return osinfo_entity_get_param_value(OSINFO_ENTITY(prod), OSINFO_PRODUCT_PROP_VENDOR); } const gchar *osinfo_product_get_version(OsinfoProduct *prod) { - return osinfo_entity_get_param_value(OSINFO_ENTITY(prod), OSINFO_PRODUCT_PROP_NAME); + return osinfo_entity_get_param_value(OSINFO_ENTITY(prod), OSINFO_PRODUCT_PROP_VERSION); } const gchar *osinfo_product_get_short_id(OsinfoProduct *prod) { - return osinfo_entity_get_param_value(OSINFO_ENTITY(prod), OSINFO_PRODUCT_PROP_NAME); + return osinfo_entity_get_param_value(OSINFO_ENTITY(prod), OSINFO_PRODUCT_PROP_SHORT_ID); } const gchar *osinfo_product_get_name(OsinfoProduct *prod) { -- 1.7.5.4

2 1

[libvirt-users] ANNOUNCE: oz 0.5.0 release
by Chris Lalancette 01 Jul '11

01 Jul '11

All, I'm pleased to announce release 0.5.0 of Oz. Oz is a program for doing automated installation of guest operating systems with limited input from the user. Release 0.5.0 is a bugfix and feature release for Oz. Some of the highlights between Oz 0.4.0 and 0.5.0 are: - Replace icicle-nc binary with a shell script to try various methods. Besides being more portable, this also allows us to convert Oz to a noarch RPM (thanks to Padraig Brady) - Support for Ubuntu 6.06 - Support for md5sum/sha1sum/sha256sum checking of ISOs after download - New -x flag for oz-install to write the libvirt XML file to a user-specified location (thanks to Steve Dake) - Support for OpenSUSE customization - Support for F-15 customization (thanks to Steve Dake) - Support for running commands at the end of package installation (thanks to Steve Dake) Fedora 14 and RHEL-6 packages are available for this release. Note that to install the RHEL-6 packages, you must be running RHEL-6.1 or later. Instructions of how to get and use Oz are available at http://aeolusproject.org/oz.html If you have any questions or comments about Oz, please feel free to contact aeolus-devel(a)lists.fedorahosted.org or me (clalance(a)redhat.com) directly. -- Chris Lalancette

1 0

[libvirt-users] vnc over ssh failing
by Pete Ashdown 30 Jun '11

30 Jun '11

I'm using virt-manager 0.8.6 client side on Ubuntu 11.04. I can't get vnc over ssh to work to a kvm guest running on a Ubuntu 10.04 host. kvmhost:~> virsh vncdisplay testing :0 kvmhost:~> telnet 127.0.0.1 5900 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. RFB 003.008 Client virt-manager debug: 2011-06-24 11:28:56,055 (console:923): Starting connect process for proto=vnc trans=tcp connhost=192.168.1.10 connuser=pashdown connport=None gaddr=127.0.0.1 gport=5900 gsocket=None 2011-06-24 11:28:56,120 (console:810): Viewer disconnected I can reach the console with: xtightvncviewer -via 192.168.1.10 127.0.0.1:0 Any suggestions are appreciated.

1 0

[libvirt-users] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.2.8 release
by Daniel P. Berrange 30 Jun '11

30 Jun '11

I am happy to announce a new release[1] of the libvirt Perl bindings, Sys::Virt 0.2.8 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.2.8.tar.gz Changes in this release - Add all new APIs in libvirt 0.9.0 - Add examples for different ways of using stream APIs to download/upload storage volumes - Requires libvirt >= 0.9.0 The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc Regards, Daniel [1] Yes, 2 releases in 2 days. I'm playing catchup with main libvirt releases and instead of going straight to latest one (0.9.2), I'm releasing Perl bindings for the 2 intermediate releases since those are needed in various distros. Guess what to expect tomorrow.... -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt-users] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.2.7 release
by Daniel P. Berrange 30 Jun '11

30 Jun '11

I am happy to announce a new release of the libvirt Perl bindings, Sys::Virt 0.2.7 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.2.7.tar.gz Changes in this release - Honour flags parameter when dumping XML - Use thread local error APIs exclusively - Fix bogus extra URI parameter in migrate_to_uri function - Implement all virStream APIs in Sys::Virt::Stream - Impement virDomainGetSysinfo binding - Call virInitialize when loading module - Add all missing error constants - Update example RPM spec to match Fedora - Requires libvirt >= 0.8.8 The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt-users] Starting libvirtd cuts off host access to external network
by PLD 24 Jun '11

24 Jun '11

I've spent some hours on this without success - any help greatly appreciated. I've just done a new RHEL6 setup, with a KVM guest (first time). The basic installation works fine until I start libvirtd; at this point, the host machine loses access to the external network: step 1: ping from host to network works; external machine on network can ping both eth0 and br1 on the host step 2: /sbin/service libvirtd start step 3: ping from host to network fails; external machine on the network can't ping either eth0 or br1 on the host Stopping libvirtd (/sbin/service libvirtd stop) makes no difference - the network remains unreachable. Any idea why this would happen? I have installed a kvm guest, using the default network script at /etc/libvirtd/qemu/networks/default.xml (although I've changed the IP addresses to be on my subnet, and the DHCP server returns only one address). I have also configured a bridge; I've attached ifcfg-eth0, ifcfg-eth1, and ifcfg-br1 below. I haven't changed any iptables configuration. If I run the guest (also RHEL6) the guest can talk to the host, but it can't see the outside world. Thanks - Paul ================================================ ifcfg-eth0: ----------- NM_CONTROLLED="no" DEVICE="eth0" HWADDR=00:16:E6:8A:C7:20 ONBOOT=yes TYPE=Ethernet DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System eth0" NETMASK=255.255.255.0 BOOTPROTO=dhcp ifcfg-eth1: ----------- NM_CONTROLLED="no" DEVICE="eth1" HWADDR=00:16:E6:8A:C7:21 ONBOOT=yes TYPE=Ethernet DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System eth1" BRIDGE=br1 NETMASK=255.255.255.0 ifcfg-br1: ---------- NM_CONTROLLED="no" DEVICE=br1 BOOTPROTO=dhcp ONBOOT=yes TYPE=Bridge DELAY=0

2 2

Re: [libvirt-users] libvirt-users Digest, Vol 18, Issue 17
by m m 21 Jun '11

21 Jun '11

Yes, I also think that iptables module should be loaded before libvirt-bin and I have seen a post which regarded loading conntrack modules and these modules also seem to be necessary... I know a little about Upstart in Ubuntu. However, I still don't know how to properly solve this problem. ip_tables module depend on other modules being loaded and since I don't know the full list of modules which should be loaded (for IP tables to work) I don't know how to handle that. Besides, even if I had this list, it could change for some time, so it is not a good idea to rely on that. Version which I have installed is the newest release from Ubuntu repositories. Thank you for help. I will be grateful for any further suggestions. 2011/6/13 <libvirt-users-request(a)redhat.com> > Send libvirt-users mailing list submissions to > libvirt-users(a)redhat.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://www.redhat.com/mailman/listinfo/libvirt-users > or, via email, send a message with subject or body 'help' to > libvirt-users-request(a)redhat.com > > You can reach the person managing the list at > libvirt-users-owner(a)redhat.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of libvirt-users digest..." > > > Today's Topics: > > 1. Re: libvirt-bin MOSTLY fails to create default virtual > network (Laine Stump) > 2. Boot delay (Jeff) > 3. e: How to disconnect the ISO image using virsh (Jeff) > 4. Difference between function Migrate and Migrate2 (Abhishek Gupta) > 5. Re: Boot delay (Michal Privoznik) > 6. hook scripts - not in Ubuntu packages? (Whit Blauvelt) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 12 Jun 2011 12:03:17 -0400 > From: Laine Stump <laine(a)laine.org> > To: libvirt-users(a)redhat.com > Subject: Re: [libvirt-users] libvirt-bin MOSTLY fails to create > default virtual network > Message-ID: <4DF4E345.7060104(a)laine.org> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 06/06/2011 03:24 PM, m m wrote: > > I have observed 3 scenarios after I reboot the host with 2 guests > > (which are supposed to autostart after boot/reboot of the host): > > 1. Default network is created but I can not ping guests. Gests don't > > have assigned IP address or they both have IP address 192.168.122.100. > > 2. Default network is not created. > > 3. Default netork is properly created and everything works fine. > > In each case guests are started and they work properly. Cases 1. and > > 2. happen a lot more often then case 3. > > > > My solutions: > > - When I restart libvirt-bin then everything is fine. > > - When I set 'sleep 40' in 'pre-start' section of > > /etc/init/libvirt-bin.conf and modify 'start on' section in the > > following way: > > > > start on (runlevel [2345] and net-device-up IFACE=br0) > > > > then everything works fine. > > > > > > However, none of the above solutions indeed solves the problem. > > Please, let me know if there is solution to this problem or what are > > your suggestions regarding this issue. > > > > **** > > HOST$ uname -a > > Linux ras 2.6.32-32-server #62-Ubuntu SMP Wed Apr 20 22:07:43 UTC 2011 > > x86_64 GNU/Linux > > > > GUEST1 and GUEST2 > > $ uname -a > > Linux server1-desktop 2.6.32-32-generic #62-Ubuntu SMP Wed Apr 20 > > 21:54:21 UTC 2011 i686 GNU/Linux > > > > HOST$ libvirtd --version > > libvirtd (libvirt) 0.7.5 > > > > My idea was that some kernel modules sometimes are loaded before > > libvirt-bin starts, and sometimes libvirt-bin starts earlier, or in > > the middle of loading of these modules, that is why 3 scenarios can be > > observed. > > That is why I have added: > > cp /proc/modules /home/wsadmin2/modules1 > > cp /proc/modules /home/wsadmin2/modules2 > > to 'pre-start' and 'post-start' parts respectively of > > /etc/init/libvirt-bin.conf. > > > > Of course, beween execution of > > - pre-start part > > - exec /usr/sbin/libvirtd -d > > - post-start part > > other kernel modules can be loaded, so we can not be sure which > > additional modules in file 'modules2' were indeed loaded before > > libvirtd was actually started. > > > > Here are my observations: > > Scenatio 1. > > 33 (fixed) modules were logged - call them BASE MODULES. > > > > Scenatio 2. > > Beside BASE MODULES + the following modules were loaded: > > > > > iptable_filter 1841 0 - Live 0xffffffffa007c000 > > > ip_tables 18201 1 iptable_filter, Live 0xffffffffa0172000 > > > x_tables 22361 1 ip_tables, Live 0xffffffffa0164000 > > In your "scenario 1" the modules necessary for iptables to function > haven't been loaded. Each virtual network requires a set of iptables > rules to function properly, and if there is no iptables, the rules can't > be added and network creation fails. Your libvirtd.log confirms that > problem: > > 10:06:06.980: error : networkAddIptablesRules:750 : failed to add > iptables rule to allow DHCP requests from 'virbr0': Invalid argument > > > 0.7.5 is quite old (> 1 year), is there perhaps a newer pre-built > version of libvirt available for your release of Ubuntu? > > It seems that Ubuntu's method of starting up libvirtd (at least on your > machine) is missing a dependency to force iptables to be loaded before > libvirtd starts. I'm unfamiliar with Ubuntu/debian startup stuff > (upstart, I guess), but that's where you need to look for the solution. > > I found the following in the ubuntu bug database, which seems similar, > but not identical (basically the system networking isn't completely > ready by the time the autostart domains are brought up): > > https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/495394 > > > > > Scenatio 3. > > Beside BASE MODULES + the following modules were loaded: > > > > $ diff modules1 modules2 > > 1c1,6 > > < iptable_filter 1841 0 - Live 0xffffffffa008b000 > > --- > > > xt_state 1490 14 - Live 0xffffffffa01ab000 > > > xt_tcpudp 2667 12 - Live 0xffffffffa01a5000 > > > nf_conntrack_ipv4 12742 14 - Live 0xffffffffa019b000 > > > nf_conntrack 73326 2 xt_state,nf_conntrack_ipv4, Live > 0xffffffffa017d000 > > conntrack is used by iptables. I haven't tried it, but wouldn't be > surprised if adding rules that required conntrack failed if it hadn't > been loaded, or something like that. > > > > nf_defrag_ipv4 1481 1 nf_conntrack_ipv4, Live 0xffffffffa0177000 > > > iptable_filter 1841 1 - Live 0xffffffffa008b000 > > 3c8 > > < x_tables 22361 1 ip_tables, Live 0xffffffffa0162000 > > --- > > > x_tables 22361 3 xt_state,xt_tcpudp,ip_tables, Live 0xffffffffa0162000 > > > > Other observations: > > Scenatio 1. > > No errors in libvirtd.log > > Scenario 2. > > > > 10:06:06.980: error : networkAddIptablesRules:750 : failed to add > > iptables rule to allow DHCP requests from 'virbr0': Invalid argument > > (...) > > 10:06:08.630: error : qemudNetworkIfaceConnect:1445 : Failed to add > > tap interface to bridge 'virbr0': No such device > > 10:06:08.630: error : qemuAutostartDomain:584 : Failed to autostart VM > > 'cluster_server1': Failed to add tap interface to bridge 'virbr0': No > > such device > > > > 10:06:08.921: info : qemudDispatchSignalEvent:390 : Received > > unexpected signal 17 > > 10:06:08.927: debug : virExecWithHook:617 : LC_ALL=C /usr/bin/kvm -help > > 10:06:08.938: info : qemudDispatchSignalEvent:390 : Received > > unexpected signal 17 > > 10:06:09.000: error : qemudNetworkIfaceConnect:1445 : Failed to add > > tap interface to bridge 'virbr0': No such device > > 10:06:09.000: error : qemuAutostartDomain:584 : Failed to autostart VM > > 'cluster_server2': Failed to add tap interface to bridge 'virbr0': No > > such device > > (...) > > Scenatio 3. > > No errors in libvirtd.log > > > > > > I didn't see any valuable logs in /var/log/boot.log, > > /var/log/messages, /var/log/syslog. Please let me know if you want to > > see them anyway or have any suggestions right away. > > > > > > _______________________________________________ > > libvirt-users mailing list > > libvirt-users(a)redhat.com > > https://www.redhat.com/mailman/listinfo/libvirt-users > > > > ------------------------------ > > Message: 2 > Date: Mon, 13 Jun 2011 08:25:00 -0500 > From: Jeff <jwk1230(a)gmail.com> > To: libvirt-users(a)redhat.com > Subject: [libvirt-users] Boot delay > Message-ID: <4609858C-FB73-4E8A-B81B-3EDCBB83B755(a)gmail.com> > Content-Type: text/plain; charset=us-ascii > > Is there a method of tweaking the boot sequence of a KVM instance so that > you can delay the process for X number of seconds? I don't have enough time > between starting the KVM and connecting via VNC. > > Thanks > > Jeff > > > > ------------------------------ > > Message: 3 > Date: Fri, 10 Jun 2011 15:12:36 -0500 > From: Jeff <jwk1230(a)gmail.com> > To: Osier Yang <jyang(a)redhat.com>, libvirt-users(a)redhat.com > Subject: [libvirt-users] e: How to disconnect the ISO image using > virsh > Message-ID: <F301FBCE-65F1-411A-980E-EF8B6A46241B(a)gmail.com> > Content-Type: text/plain; charset="utf-8" > > I am trying to detach an ISO from a KVM machine and I've tried both > attach-disk using " " in the file path as well as the update-device option > but am getting this error > > error: Failed to update device from /var/run/libvirt/qemu/kvmtest1.xml > error: XML description for unknown device type is not well formed or > invalid. > > I tried doing a virsh edit on the xml file to remove the source file path > to the ISO, as I assume is the correct method, and then running the virsh > update-device but it's not working. > > Can anyone advise the correct steps to detach a device from a running > and/or offline domain? > > Additionally - anyone have any guidance on how to attach a CD device to a > domain that is currently shutdown, for example, if I wanted to boot the > domain to a rescue CD image? > > Thanks > > Jeff > > > ? 2011?03?31? 15:17, Masanari Iida ??: > Somebody sent me a tips. > Following command do what I wanted to do. > Thanks. > > attach-disk guest01 " " hdc --driver file --type cdrom > --mode readonly > Also using "update-device" with an xml which doesn't specify > the source file path will work. > > On Thu, Mar 31, 2011 at 3:29 PM, Masanari Iida<standby24x7 gmail com> > wrote: > Hello, > > I can attach disc ISO image to cd-rom from virsh. > And I can replace the ISO image from disc1 to disc2 using the 2nd example. > > (example) > attach-disk guest01 /root/disc1.iso hdc --driver file --type cdrom > --mode readonly > attach-disk guest01 /root/disc2.iso hdc --driver file --type cdrom > --mode readonly > > My question is, how can I disconnect the image from the cdrom drive using > virsh. > Because, if I try to detach-disk hdc, I got following errors. > > virsh # detach-disk guest01 hdc > error: Failed to detach disk > error: this function is not supported by the connection driver: > This type of device cannot be hot unplugged > > What I can do is possible from virt-manager's "Disconnect" button, > (next to source path: line) from Hardware's TAB, Disk hdc screen. > I want to do this from virsh. > > OS: RHEL5.6 > libvirt-0.8.2-15.el5_6.1 is used. > > Regards, > Masanari Iida > > _______________________________________________ > libvirt-users mailing list > libvirt-users redhat com > https://www.redhat.com/mailman/listinfo/libvirt-users > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > https://www.redhat.com/archives/libvirt-users/attachments/20110610/f4acfe4c… > > > > ------------------------------ > > Message: 4 > Date: Sat, 11 Jun 2011 06:39:46 +0530 > From: Abhishek Gupta <cs1090174(a)cse.iitd.ernet.in> > To: libvirt-users(a)redhat.com > Subject: [libvirt-users] Difference between function Migrate and > Migrate2 > Message-ID: <BANLkTinv6XiRMz=rS88A-U-b2Hz3SVTesg(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I was reading the API reference for the libvirt, when I came across > the function? virDomainMigrate and virDomainMigrate2. I am unable to > find the difference between the two. Can someone please tell the > difference in the application of the two? > > -- > Abhishek > > > > ------------------------------ > > Message: 5 > Date: Mon, 13 Jun 2011 17:21:02 +0200 > From: Michal Privoznik <mprivozn(a)redhat.com> > To: Jeff <jwk1230(a)gmail.com> > Cc: libvirt-users(a)redhat.com > Subject: Re: [libvirt-users] Boot delay > Message-ID: <4DF62ADE.60209(a)redhat.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On 13.06.2011 15:25, Jeff wrote: > > Is there a method of tweaking the boot sequence of a KVM instance so that > you can delay the process for X number of seconds? I don't have enough time > between starting the KVM and connecting via VNC. > > > You might consider using virt-viewer. It simply waits for domain to > boot, if it is down. > > Your other option is to create hook script: > http://libvirt.org/hooks.html > and put conditional sleep there, because libvirt just before running a > domain tries to execute qemu with some arguments (e.g. -help) to qeury > its capabilities. And you don't want your hook script to delay that. > > So you need something like this: > > if [ $2 == "start" ]; then > sleep 5 > fi > > > Thanks > > > > Jeff > > > > _______________________________________________ > > libvirt-users mailing list > > libvirt-users(a)redhat.com > > https://www.redhat.com/mailman/listinfo/libvirt-users > > Michal > > > > ------------------------------ > > Message: 6 > Date: Mon, 13 Jun 2011 11:42:44 -0400 > From: Whit Blauvelt <whit.virt(a)transpect.com> > To: libvirt-users(a)redhat.com > Subject: [libvirt-users] hook scripts - not in Ubuntu packages? > Message-ID: <20110613154244.GA28777(a)black.transpect.com> > Content-Type: text/plain; charset=us-ascii > > On Mon, Jun 13, 2011 at 05:21:02PM +0200, Michal Privoznik wrote: > > > Your other option is to create hook script: > > http://libvirt.org/hooks.html > > That looks useful. > > On several Ubuntu systems, with Ubuntu libvirt 0.8.8 and 0.8.3 packages > installed, there's no libvirt/hooks/ directory at all. Is this a directory > that can simply be created and used under libvirt, or does using this > feature on Ubuntu require custom installation? > > Thanks, > Whit > > > > ------------------------------ > > _______________________________________________ > libvirt-users mailing list > libvirt-users(a)redhat.com > https://www.redhat.com/mailman/listinfo/libvirt-users > > End of libvirt-users Digest, Vol 18, Issue 17 > ********************************************* >

2 1