- Users - libvirt List Archives

[libvirt-users] virInitialize dumps core intermittently.
by Sharad Mishra 12 Aug '11

12 Aug '11

Hi, I have a host with 6 VMs set to autostart. When this host reboots, it starts libvirtd, pegasus cimom and libvirt-cim. It also restarts the VMs. Intermittently we noticed a core during start up that points to the last call made by libvirt-cim to "virInitialize". I am thinking that it is a timing issue where virInitialize is called while libvirt is trying to autostart the VMs. Is this a known issue? Thanks, Sharad Mishra

3 2

[libvirt-users] iscsi w/ libvirt
by Stefan G. Weichinger 11 Aug '11

11 Aug '11

"Playing" with a NAS capable of iscsi ... trying to make use of it within the virtual machine manager. Could someone point me at or provide me an example/screenshot of adding iscsi to my KVM-host? I think I still don't get it. Should I add an iscsi-LUN as a storage-pool? Or as single disk to a VM? Could someone pls point me at some docs to make me understand? Thanks a lot, Stefan

2 2

[libvirt-users] the naming convention libvirt names a block based storage volume
by Yih-Herng Chuang 10 Aug '11

10 Aug '11

Seems like different libvirt versions generate a storage volume name in different format. We would like to learn how libvirt names a storage volume under a block based storage pool. So that we may properly extract the LUN identifier out of the volume name for now and in the future. On host A loaded with libvirt 0.8.7 # virsh vol-list SanPool1 Name Path ----------------------------------------- unit:0:0:11 /dev/disk/by-id/wwn-0x600a0b800013071a000035ec4e32b832 On host B loaded with libvirt 0.8.1 # virsh vol-list SanPool1 Name Path ----------------------------------------- 1.0.0.0 /dev/disk/by-id/wwn-0x60080e500017e1d40000d0b74d873b13 Regards, --Yih Yih-Herng Chuang IBM Center for Microsoft Technologies 3600 Carillon Point, Kirkland WA 98033 (DID) (425) 803-7285 (TIE) 977-7285 YihHerng(a)us.ibm.com

3 3

[libvirt-users] virt-manager - how to add /dev/mapper as a storage pool
by Marc Haber 09 Aug '11

09 Aug '11

Hi, I would like to be able to configure VMs running off dm-crypt devices that were unlocked in the host. Unlocked dm-crypt devices show up in /dev/mapper/devicename, with devicename being the second parameter given to cryptsetup luksOpen. The LVM storage pool type insists on searching in /dev/vgname and cannot be tricked into reading /dev/mapper by giving it a fake VG named mapper; the LVM storage pool type "dir" mishandles /dev/mapper/control ("illegal seek"). Is there a workaround to be able to use such devices in virt-manager without having to define a single storage pool for every device used? Greetings Marc -- ----------------------------------------------------------------------------- Marc Haber | "I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things." Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 3221 2323190

2 4

[libvirt-users] XML file location
by Jeff 08 Aug '11

08 Aug '11

Can anyone tell me how to change the default directory which stores the guest XML files? I want to keep them with the guest image files on a shared NFS filesystem. Thanks, Jeff

2 1

[libvirt-users] Create volume wit libvirt API for Python
by Anatoliy Guskov 06 Aug '11

06 Aug '11

Please help! How create volume with libvirt API for python? conn = libvirt.open(qemu:///system) vol = libvirt.virStoragePool(conn) conf_file = 'disk.xml' f = open(conf_file) xml = f.read() pool = "default" vol.createXML(pool,xml) xml file disk.xml: <volume> <name>name.img</name> <key>/var/lib/libvirt/images/name.img</key> <source> </source> <capacity>21474836480</capacity> <allocation>21474840576</allocation> <target> <path>/var/lib/libvirt/images/name.img</path> <format type='raw'/> </target> </volume> This script not work :-( Thanks for help!

1 0

[libvirt-users] Reg: Packaging format for LIBIVRT
by Alphonse Hansel Anthony 04 Aug '11

04 Aug '11

Hi, I am looking for an available Open Source Packaging model for Libvirt, similar to OVF/OVA supported by Vmware. The OVA model uses the manifest to define the resource requirements for the virtual appliance and the XML schema follows OVF. Are there similar specification to include libvirt XML in a package along with disk images/ISO... etc? Any pointers in this regard would be useful. Thanks, Alphonse

1 0

[libvirt-users] Using libvirt with a preexisting network infrastructure
by Vegard Vesterheim 04 Aug '11

04 Aug '11

I have a server running Ubuntu natty (libvirt 0.8.8) with separate ethernet interfaces. I have created an unnumbered bridge for each interface, these are connected to an already established network infrastructure, with preexisting DHCP and DNS services. I would like to handle *establishment* of these bridges outside libvirt (via /etc/network/interfaces), but still have them defined as networks within libvirt. So, libvirt shall not *configure* the bridges, just be aware of their existence and connect each VM to its configured bridge. This way I can use virt-manager/libvirt to connect my virtual hosts to the correct network. The libvirt commands net-start, net-destroy would become no-ops. It seems that libvirt is geared towards handling all network configuration itself, but I do not need help from libvirt for establishing the bridges, DHCP and DNS. I know that I can edit the <interface> element in the VM XML-files after creation, to assign a virtual host to a bridge, like this: <interface type='bridge'> <source bridge='br22'/> .... </interface> This works, but I would like to do this with libvirt mechanisms. Is this possible? - Vegard V -

3 3

[libvirt-users] Custom storage pools/volumes
by Mohammed Naser 04 Aug '11

04 Aug '11

Hello everyone, We're currently working with using libvirt as an abstract API to make our dealings with other hypervisors far easier and faster, however, we have our own storage API that connects/disconnects and makes LUNs available over iSCSI with iSER. We would have loved to use a storage pool however our system implements a one target per LUN/VDI, therefore, we'd have to create a pool for each server. We really would like to utilize the virStorageVolDownload / virStorageVolUpload API calls, however, it seems that those would only work if the storage volume is within a pool. Is there a way we could possibly define a storage volume without a pool or will we have to create a storage pool for each individual volume? Thank you, Mohammed Naser http://vexxhost.com

2 1

[libvirt-users] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.4 release
by Daniel P. Berrange 04 Aug '11

04 Aug '11

I am happy to announce a new release[1] of the libvirt Perl bindings, Sys::Virt 0.9.4 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.9.4.tar.gz Changes in this release - Add all new APIs in libvirt 0.9.4 - Requires libvirt >= 0.9.4 - Add missing VIR_DUMP_* and VIR_MIGRATE_* constants from previous releases The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0