- Users - libvirt List Archives

[libvirt-users] virt-install and IOThreads
by Igor Gnatenko 18 Jan '19

18 Jan '19

Hello, is there any way of specifying iothreads via virt-install command? I've tried appending ",iothread='1'" but that didn't work. Thanks in advance! -- -Igor Gnatenko

3 3

[libvirt-users] VM running with storage image file deleted
by Roosen, Nicolas 17 Jan '19

17 Jan '19

Hello, I have a strange issue I'd like to have some insights on. We have 2 running VM, the storage pool is over NFS. Unfortunately, the backend storage folder has been deleted (so the image file in it as well, obviously) ... Yet, the 2 VM are still up and running, with their root filesystem being mounted "rw". - how does that work? I was expecting that with the file image being deleted, the VM would not work at all. - since the VM is still running, is there a way to create a snapshot of it in order to re-create the image file on another storage pool ? I'm currently exploring "virsh snapshot-create-as ...", but if access to the image file is needed, it will fail. Thanks. -- Nicolas

4 5

[libvirt-users] cpu0 unhandled rdmsr:
by Christophe Dumont 16 Jan '19

16 Jan '19

Hello, Do you know what this means : kvm: 2918: cpu0 unhandled rdmsr: 0x345 kvm: 2918: cpu0 unhandled rdmsr: 0x1c9 kvm: 2918: cpu0 unhandled rdmsr: 0x1a6 kvm: 2918: cpu0 unhandled rdmsr: 0x1a7 kvm: 2918: cpu0 unhandled rdmsr: 0x3f6 tap110i0: no IPv6 routers present kvm: 2952: cpu0 unhandled rdmsr: 0x345 kvm: 2952: cpu0 unhandled rdmsr: 0x1c9 kvm: 2952: cpu0 unhandled rdmsr: 0x1a6 kvm: 2952: cpu0 unhandled rdmsr: 0x1a7 kvm: 2952: cpu0 unhandled rdmsr: 0x3f6 I think it causes instability, we had to reboot the server twice and a backup script still fails. Thx -- Christophe Dumont 4, Passage du Lycée 38000 Grenoble 0633475733

2 2

[libvirt-users] forcing order of vnet creation
by daggs 13 Jan '19

13 Jan '19

dummy0 Link encap:Ethernet HWaddr C6:C8:2A:04:FD:23 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:22048 errors:0 dropped:0 overruns:0 frame:0 TX packets:22048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1068960 (1.0 MiB) TX bytes:1068960 (1.0 MiB) Greetings, I have a host that has two vms, one is a router that all the machines on the network connect to it and that other a test virtual machine. the router vm is connected to the host using a virt net, the test virtual machine is connected to the router via a virtual switch. my /etc/network/interfaces defines vnet1 as dhcp by assuming that it is the vnet for the host (it was seen multiple times). yesterday I came back from a vacation, booted the system and didn't got any ip to the host, the rest of the machines on the network got ip. at the end, the issue was that vnet1 was the virtual switch rather than the host's virtual nic. is there a way for "lock" the vnics config so they won't change? the host is Debian 9.6, the output of ifconfig -a is below (the "faulty" scenario) virtsw0 Link encap:Ethernet HWaddr 52:54:00:6B:1B:92 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:92908 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13257095 (12.6 MiB) TX bytes:756 (756.0 B) virtsw0-nic Link encap:Ethernet HWaddr 52:54:00:6B:1B:92 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr FE:54:00:8B:66:C1 inet addr:10.0.0.3 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::fc54:ff:fe8b:66c1/64 Scope:Link inet6 addr: fdab:9802:eb52:0:fc54:ff:fe8b:66c1/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:528665 errors:0 dropped:0 overruns:0 frame:0 TX packets:752585 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44311555 (42.2 MiB) TX bytes:2165654771 (2.0 GiB) vnet1 Link encap:Ethernet HWaddr FE:54:00:A7:79:6B inet6 addr: fe80::fc54:ff:fea7:796b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:92983 errors:0 dropped:0 overruns:0 frame:0 TX packets:81658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14566221 (13.8 MiB) TX bytes:4249914 (4.0 MiB) vnet2 Link encap:Ethernet HWaddr FE:54:00:54:78:BE inet6 addr: fe80::fc54:ff:fe54:78be/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15 errors:0 dropped:0 overruns:0 frame:0 TX packets:257 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1962 (1.9 KiB) TX bytes:42261 (41.2 KiB) thanks, Dagg.

1 1

[libvirt-users] openVswitch
by lejeczek 10 Jan '19

10 Jan '19

hi guys I'm trying a typical, I'd presume, setup: two libvirt hosts with one lxc guest each. boxA: $ ovs-vsctl show 1a6a2e4f-11f3-48df-becd-03b59d00a1fb Bridge "ovsbr0" Port nm-team trunks: [55] Interface nm-team Port "vnet12" trunks: [55] Interface "vnet12" Port "ovsbr0" Interface "ovsbr0" type: internal ovs_version: "2.0.0" boxB: $ ovs-vsctl show 05ffa96c-a961-41e7-9f8a-74dbe214153a Bridge "ovsbr0" Port "vnet41" trunks: [55] Interface "vnet41" Port nm-team trunks: [55] Interface nm-team Port "ovsbr0" Interface "ovsbr0" type: internal ovs_version: "2.0.0" In libvirt openvswitch network defines & starts okey, both guests start okey, yet guests cannot ping one another. Ifaces in guests seem to instantiate okey cause each guest can ping its own IP (on libvirt openvswitch net) You can see that on each host openvswitch port is nm-team, which I presume must be pretty "regular" situation. Only thing I'm not sure is that the same nm-team (on each host) is also a port to NM's bridge. (which works fine, these bridge ifaces on both hosts ping each other no problems). Which bits I get wrong or am missing? many thanks, L.

1 0

[libvirt-users] Golang libvirt bindings problem
by Branimir Pejakovic 09 Jan '19

09 Jan '19

Hello everybody! First, allow me to wish you all a Happy New year! I have a problem with a small app that I wrote in Go and which uses libvirt go bindings. Actually, the problem exists only when I want to compile the code statically. Basically, when CGO_ENABLED=0 is exported, go (running go test, go run, go build) complains: undefined: libvirt.NewConnect When I try to compile the source dynamically (running the same go <command> commands) the app works/checks out as expected and works without any problem. I tried this on: - CentOS 7.6 (go version 1.11.2) - Ubuntu 18.04 LTS (go version 1.10.4) Both systems - as advised on project's github pages/godoc.org - have libvirt-dev package installed. Also, the libvirt module is imported as advised: libvirt "github.com/libvirt/libvirt-go" GOPATH is set to /home/$USER/go I downloaded the package via go get; go get -v -u github.com/libvirt/libvirt-go. Please if somebody encountered this before, could you give me a hint if possible in order to solve this? Thank you very much in advance! Regards, Branimir

2 1

[libvirt-users] virsh on mac os X
by Keith Bierman 09 Jan '19

09 Jan '19

Mac OS X 10.14.2 VirtualBox 5.2.22 and 6.0.0 libvirt installed via homebrew virsh -V Virsh command line tool of libvirt 4.10.0 See web site at https://libvirt.org/ Compiled with support for: Hypervisors: QEMU/KVM VMware VirtualBox ESX Test Networking: Remote Bridging Storage: Dir Miscellaneous: Daemon Secrets Debug brew services start libvirt virsh -c vbox:///session list error: failed to connect to the hypervisor error: internal error: unable to initialize VirtualBox driver API Unless there's a known issue with Mojave that's escaped me, surely I've done something clueless .. pointers to the FM or otherwise greatly appreciated. Keith Bierman khbkhb(a)gmail.com

1 4

[libvirt-users] xen and libvirt
by Christoph 08 Jan '19

08 Jan '19

Hi Does someone know how it is possible these parameters: e820_host max_grant_frames to set with libvirt xml config? I use them with xl config but I want to change to libvirt config/tools. (with libvirt 4.10 it is possible to start pvh domains) -- ------ Greetz

2 3

[libvirt-users] script called from qemu hook freezes.
by daggs 07 Jan '19

07 Jan '19

Greetings, I'm executing an external script when the qemu hook is called with start or release, the script is rather simple, upon start it iterates over the output of lsusb -t and for each device, it looks if it should be added to the vm we started, if so, it attaches it to the vm as follows: virsh --connect qemu:///system "${cmd}" "${domain}" /dev/stdin << END <hostdev mode='subsystem' type='usb'> <source> <address bus='${busnum}' device='${devnum}' /> </source> </hostdev> END where cmd is attach-device, domain is the vm's name, busnum and devnum come from the output of the lsusb -t. my issue is that upon the first attach attempt, the cmd hangs, I need to kill it and after than I cannot preform any virsh cmd, I must restart the host. if I try to execute the same cmd after the vm is up, it works great. why the attach process gets stuck? do I need to execute it under different stage? thanks, Dagg.

3 6

[libvirt-users] macvtap and tagged VLANs to the VM
by Marc Haber 05 Jan '19

05 Jan '19

Hi, I would like to run a network firewall as a VM on a KVM host. There are ~ 25 VLANs delivered to the KVM host on three dedicated links, no LACP or other things. I have the VLANs 100-180 on the host's enp1s0, the VLANs 200-280 on the host's enp2s0 and the VLANs 300-380 on the host's enp3s0. To save myself from configuring all VLANs on the KVM host, I'd like to hand the entire ethernet link to the VM and to have the VLAN interfaces there. Using classical Linux bridges (brctl), things work fine. They don't when I try macvlan: On the host: 4: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff promiscuity 1 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 5: unt382@enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff promiscuity 0 vlan protocol 802.1Q id 382 <REORDER_HDR> addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 15: macvtap3@enp3s0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 500 link/ether 52:54:00:bf:bb:ab brd ff:ff:ff:ff:ff:ff promiscuity 0 macvtap mode bridge addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 4: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff inet6 fe80::20d:b9ff:fe34:2afe/64 scope link valid_lft forever preferred_lft forever 5: unt382@enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff inet6 fe80::20d:b9ff:fe34:2afe/64 scope link valid_lft forever preferred_lft forever 15: macvtap3@enp3s0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 500 link/ether 52:54:00:bf:bb:ab brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:febf:bbab/64 scope link valid_lft forever preferred_lft forever In the XML: <interface type='direct'> <mac address='52:54:00:bf:bb:ab'/> <source dev='enp3s0' mode='bridge'/> <target dev='macvtap3'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> And in the VM: root@grml ~ # ip -d link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:bb:ab brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 3: vlan0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:bb:ab brd ff:ff:ff:ff:ff:ff promiscuity 0 vlan protocol 802.1Q id 382 <REORDER_HDR> addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 root@grml ~ # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:bf:bb:ab brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:febf:bbab/64 scope link valid_lft forever preferred_lft forever 3: vlan0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:bf:bb:ab brd ff:ff:ff:ff:ff:ff inet 192.168.252.220/24 brd 192.168.252.255 scope global vlan0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:febf:bbab/64 scope link valid_lft forever preferred_lft forever root@grml ~ # I then ping from the VM to 192.168.252.241, which is a differnt host on the network, neither the VM host the VM is running on nor another VM on the same host. That should rule out the connectivity issues that a macvtap interface has, right? On the VM, I see ARP requests going out, but no answers come in. On the pinged host, I see: 22:50:23.881163 52:54:00:bf:bb:ab > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 192.168.252.241 tell 192.168.252.220, length 46 22:50:23.881242 52:54:00:95:df:a6 > 52:54:00:bf:bb:ab, ethertype ARP (0x0806), length 42: Reply 192.168.252.241 is-at 52:54:00:95:df:a6, length 28 So, the packets going out from my VM are correctly delivered to the target, the target replies, but the replies never make it back to the VM. Do I see correctly that tcpdump on the VM host won't give accurate readings since macvtap will divert the frame before tcpdump will see it? On the other hand, a VM directly configured to the host's unt382 interface works fine: <interface type='direct'> <mac address='52:54:00:cb:ed:34'/> <source dev='unt382' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> I would however like to avoid having 25 interface stanzas in my XML. I would appeciate any ideas to solve this issue. I know this is most probably not a libvirt issue, but this list is about the only place that comes to my mind where people knowledgeable about those complex network stuff might hang around. If there is a better place to ask, I am open for suggestion. Please pardon my intrusion. Greetings Marc -- ----------------------------------------------------------------------------- Marc Haber | "I don't trust Computers. They | Mailadresse im Header Leimen, Germany | lose things." Winona Ryder | Fon: *49 6224 1600402 Nordisch by Nature | How to make an American Quilt | Fax: *49 6224 1600421

2 5