June 2012 - Users - libvirt List Archives

[libvirt-users] A RFE for libvirt
by whuang 07 Jun '12

07 Jun '12

Hi, I am a libvirt user , there is a requirement about libvirt : I need a virsh cmd like "#virsh *create-as* --disk --net " to create a very sample guest I have not xml file and I think it's a little hard for me to create a NEW xml for libvirt , so I need a virsh cmd like "vol-create-as " help me do that. I know there are a lot of options for creating a guest , I just need --disk and --net options , others libvirt can set a defaut value . I just want an easy way to create a guest :> Wenlong -- Best Regards! Wenlong Huang IRC Account: wenlong Phone: 62608117 / 15011214521

4 6

[libvirt-users] Fine grained authorisation
by Sam Wilson 07 Jun '12

07 Jun '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi List, I am trying to provide a solution using KVM on RHEL for a number of technical staff sharing server resources. We would like to be able to "restrict" a number of guests from certain users to follow the principle of least privilege. So in short, is there a way of defining access to individual guests via libvirt / polkit or is read only / read write the best we can expect for the foreseeable future? Cheers, Sam -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iF4EAREIAAYFAk/QWhsACgkQFdt86iEfl/cYagD9FGktnsqyGkfzXWkUyFtJmQc2 VX6ZG2iXmKD75R7c6IgA/j5WvnsXdBA6jPO9/WnX83CmmorPc9oRN6lpYTxXgkON =38VZ -----END PGP SIGNATURE-----

2 1

Re: [libvirt-users] The default location of vm snapshots
by SimpleCloud 07 Jun '12

07 Jun '12

Thanks a lot for the details. From http://wiki.libvirt.org/page/Snapshots, we have to pause the domain before taking snapshot and resume after. Is there any way to do "live" snapshotting for running domain or reduce pause time? Thanks, Lei ------------------ Original ------------------ From: "Eric Blake"<eblake(a)redhat.com>; Date: Wed, Jun 6, 2012 08:24 PM To: "SimpleCloud"<simplecloud(a)qq.com>; Cc: "libvirt-users"<libvirt-users(a)redhat.com>; Subject: Re: [libvirt-users] The default location of vm snapshots On 06/06/2012 03:20 AM, SimpleCloud wrote: > Hi all, > > > Where could I find the memory dump and disk snapshots for vm after command "virsh snapshot-create <some_running_vm>"? Thanks in advance. This particular form of snapshot is called the 'system checkpoint' snapshot, and the current qemu implementation is that the snapshot creates internal snapshots in your qcow2 files. If you do 'qemu-img info $path_to_img', you will see the disk snapshots listed as internal snapshots for each image associated with the domain, as well as the first qcow2 file also having memory associated with the internal snapshot. > > > I found the xml files in /var/lib/libvirt/qemu/snapshot/, but hava no idea about the raw snapshot file. Looking in /var/lib/libvirt is generally unsupported (that is an internal libvirt detail, and subject to change in future releases). The only way to safely look at the snapshot XML is via the API (virDomainSnapshotGetXMLDesc, which is wrapped by 'virsh snapshot-dumpxml'). I am also hoping to submit a patch that will allow you the option to create an external snapshot rather than using qcow2 internal snapshots, but that's not in the code base yet. -- Eric Blake eblake(a)redhat.com +1-919-301-3266 Libvirt virtualization library http://libvirt.org

3 3

[libvirt-users] qemu-img snapshots with backing stores?
by Sean Abbott 07 Jun '12

07 Jun '12

So, I was attempting to use qemu snapshots with backing stores. The QEMU docs (http://wiki.qemu.org/Documentation/CreateSnapshot) make it sound like you simply point your qemu at the snapshot after it's creation, and you're golden. When attempting this with libvirt, though, it fails. I created a snapshot using the above tutorial. the resulting file is disk.0, and a qmeu-img info on it returns: image: disk.0 file format: qcow2 virtual size: 29G (31457280000 bytes) disk size: 140K cluster_size: 65536 backing file: /var/lib/one/public/lin_client_current.qcow2 (actual path: /var/lib/one/public/lin_client_current.qcow2) So that all looks groovy, right? Then, I created (via opennebula) an xml deployment file like so: http://paste.ubuntu.com/1027145/ When I attempt to do a virsh create, I get the following errors: virsh # create deployment.0 error: Failed to create domain from deployment.0 error: internal error process exited while connecting to monitor: file=/var/lib/one/vm/56/images/disk.0,if=none,id=drive-virtio-disk0,boot=on,format=qcow2,cache=none qemu-kvm: boot=on|off is deprecated and will be ignored. Future versions will reject this parameter. Please update your scripts. qemu-system-x86_64: -drive file=/var/lib/one/vm/56/images/disk.0,if=none,id=drive-virtio-disk0,boot=on,format=qcow2,cache=none,boot=on: could not open disk image /var/lib/one/vm/56/images/disk.0: Invalid argument So...something isn't working. Is it possible to do this, or should I give up on this path? Thanks! sean

2 6

[libvirt-users] The default location of vm snapshots
by SimpleCloud 06 Jun '12

06 Jun '12

Hi all, Where could I find the memory dump and disk snapshots for vm after command "virsh snapshot-create <some_running_vm>"? Thanks in advance. I found the xml files in /var/lib/libvirt/qemu/snapshot/, but hava no idea about the raw snapshot file. Thanks, Lei

2 1

[libvirt-users] [Fwd: error: this function is not supported by the connection driver : virConnectNumOfStoragePool]
by Onkar 05 Jun '12

05 Jun '12

Hello All, Any idea on this issue ? Regards, Onkar -------- Forwarded Message -------- From: Onkar <kernzap(a)gmail.com> To: libvir-list <libvir-list(a)redhat.com> Subject: error: this function is not supported by the connection driver : virConnectNumOfStoragePool Date: Wed, 30 May 2012 21:29:42 +0530 Hello, I configured libvirt like this ./configure --prefix=/ --exec-prefix=/usr/ --libdir=/usr/lib64/ --with-storage-dir --with-storage-dir --with-storage-dir --with-storage-dir --with-storage-dir --with-storage-dir --with-storage-dir --with-storage-dir --with-qemu --with-libvirtd --with-selinux --with-network --with-libblkid and then, make -j4 make install and then # virsh list --all Id Name State ---------------------------------------------------- - vm1 shut off # virsh pool-list --all error: Failed to list active pools error: this function is not supported by the connection driver: virConnectNumOfStoragePools getting this error , any clues on why is this error ? Regards, Onkar

4 4

[libvirt-users] converting save/dump output into physical memory image
by Andrew Tappert 04 Jun '12

04 Jun '12

A lot of people in the security community, myself included, are interested in memory forensics these days. Virtualization is a natural fit with memory forensics because it allows one to get access to a guest's memory without having to introduce any extra software into the guest or otherwise interfere with it. Incident responders are particularly interested in getting memory dumps from systems they're investigating. Virsh has "save" and "dump" commands for storing the state of a guest to a file on disk, but memory of KVM guests doesn't get saved in the "standard" input format for memory forensics tools, which is a raw physical memory image. (This is what you'd get via the classical "dd /dev/mem" approach or the contemporary equivalent using the crash driver; and VMware Server and Workstation produce .vmem files, which are such raw physical memory images, when a guest is paused or snapshotted.) In order to analyze the memory of Libvirt/KVM guests with my Linux memory forensics software, Second Look, I've created a tool for converting Libvirt-QEMU-save files (output of virsh save command) or QEMU-savevm files (output of virsh dump command) to raw physical memory images. I've got a basic working capability, though I'm still tracking down some problems with a guest allocated 8GB RAM--not all the memory seems to be present in the save or dump file. And I haven't tested very extensively yet, version support is limited to what I myself am currently running, etc. I'd like to know if this is a capability that others are interested in. Is this something that would be of interest to the Libvirt project if I were to contribute the code, or to the KVM project, or do you think it best exists as a separate project? I've also got a proof-of-concept tool for converting hibernate images to raw physical memory images. Perhaps a collection of tools for converting various memory dump formats would be a good project. Anyone else interested in this kind of stuff? As an author of commercial memory forensics software I've got a vested interest in availability of good memory acquisition capabilities. But there are a number of people working on FOSS Linux memory analysis tools, too... Andrew

4 5

[libvirt-users] guest fails to start: Error initializing virtio-net-pci
by Ekkard Gerlach 03 Jun '12

03 Jun '12

Hi, squeeze host, winxp guest. guest fails to start: PCI: devfn 24 not available fpr virtio-net-pci, in use by virtio-blk-pci Error initializing virtio-net-pci xml-File: ======== <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/winxp'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> this added: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/winxp-d'/> <target dev='hdb' bus='virtio'/> <address type='drive' controller='0' bus='0' unit='1'/> </disk> root@squeeze64:~# lsmod | grep virt virtio_balloon 2961 0 virtio_net 10573 0 virtio_blk 4225 0 virtio_pci 5511 0 virtio_ring 3258 1 virtio_pci virtio 3309 4 virtio_balloon,virtio_net,virtio_blk,virtio_pci root@squeeze64:~# dpkg -l | egrep "kvm|qemu|virt" ii etherboot-qemu 5.4.4-9 Bootstrapping for various network adapters (qemu) ii gvfs 1.6.4-3 userspace virtual filesystem - server ii kvm 1:0.12.5+dfsg-5+squeeze8 dummy transitional package from kvm to qemu-kvm ii libvirt-bin 0.8.3-5+squeeze2 the programs for the libvirt library ii libvirt0 0.8.3-5+squeeze2 library for interfacing with different virtualization systems ii python-libvirt 0.8.3-5+squeeze2 libvirt Python bindings ii qemu 0.12.5+dfsg-3squeeze1 fast processor emulator ii qemu-keymaps 0.12.5+dfsg-3squeeze1 QEMU keyboard maps ii qemu-kvm 0.12.5+dfsg-5+squeeze8 Full virtualization on x86 hardware ii qemu-system 0.12.5+dfsg-3squeeze1 QEMU full system emulation binaries ii qemu-user 0.12.5+dfsg-3squeeze1 QEMU user mode emulation binaries ii qemu-utils 0.12.5+dfsg-3squeeze1 QEMU utilities ii virt-manager 0.8.4-8 desktop application for managing virtual machines ii virt-viewer 0.2.1-1 Displaying the graphical console of a virtual machine ii virtinst 0.500.3-2 Programs to create and clone virtual machines I sucessfully added a virtio NIC: <interface type='bridge'> <mac address='52:54:00:a6:fb:ab'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> an I installed the driver from red hat "virtio-win-0.1-22.iso". But adding a virtio disk fails. any ideas? Ekkard

1 0

[libvirt-users] PCI Passthrough, AMD, fails to initialize
by Chris Sanders 03 Jun '12

03 Jun '12

I'm looking for assistance with pci-passthrough on CentOS 6.2. I've installed libvirt version: 0.9.4, package: 23.el6_2.8 from yum. I have a windows XP client setup via virt-manager which boots and runs fine until I attempt to assign a PCI device to it. The error log reads: -----------------/var/log/libvirt/qemu/SageTv.log---------------- 2012-06-02 22:55:07.801: starting up LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin QEMU_AUDIO_DRV=spice /usr/libexec/qemu-kvm -S -M rhel6.2.0 -cpu Opteron_G3,+wdt,+skinit,+osvw,+3dnowprefetch,+cr8legacy,+extapic,+cmp_legacy,+pdpe1gb,+fxsr_opt,+mmxext,+aes,+sse4.2,+sse4.1,+ssse3,+ht,+vme -enable-kvm -m 3048 -smp 2,sockets=2,cores=1,threads=1 -name SageTv -uuid bf80f6a5-1471-9415-e502-88c4999319c7 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/SageTv.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime,driftfix=slew -no-shutdown -boot order=c,menu=on -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive file=/dev/vg_hdd/lv_sagetv,if=none,id=drive-virtio-disk0,format=raw,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk0,id=virtio-disk0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=25 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:b9:bf:b0,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -chardev spicevmc,id=charchannel0,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0 -usb -device usb-tablet,id=input0 -spice port=5900,addr=127.0.0.1,disable-ticketing -vga std -device intel-hda,id=sound0,bus=pci.0,addr=0x4 -device hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device pci-assign,host=04:07.0,id=hostdev0,configfd=26,bus=pci.0,addr=0x8 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x7 char device redirected to /dev/pts/1 do_spice_init: starting 0.8.3 spice_server_add_interface: SPICE_INTERFACE_MIGRATION spice_server_add_interface: SPICE_INTERFACE_KEYBOARD spice_server_add_interface: SPICE_INTERFACE_MOUSE spice_server_add_interface: SPICE_INTERFACE_PLAYBACK spice_server_add_interface: SPICE_INTERFACE_RECORD Failed to assign device "hostdev0" : Invalid argument qemu-kvm: -device pci-assign,host=04:07.0,id=hostdev0,configfd=26,bus=pci.0,addr=0x8: Device 'pci-assign' could not be initialized 2012-06-02 22:55:08.744: shutting down -----------------/var/log/libvirt/qemu/SageTv.log---------------- After this I find the dmesg shows: -----------------dmesg------------------ pci-stub 0000:04:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci-stub 0000:04:07.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002) assign device 4:7.0 failed -----------------dmesg------------------ In case this was an IRQ problem I checked my /proc/interrupts. -----------------interrupts------------------ CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 130 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 0 0 1 1 0 0 0 0 IO-APIC-edge i8042 8: 0 1 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 17: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2, ehci_hcd:usb3 18: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb5, ohci_hcd:usb6, ohci_hcd:usb7 19: 587 2219 1807 588 602 600 687 607 IO-APIC-fasteoi ahci 21: 422 430 7316 402 410 405 429 412 IO-APIC-fasteoi 24: 0 0 0 0 0 0 0 0 PCI-MSI-edge AMD-Vi 25: 12 10 9 20 11 15 15 15 PCI-MSI-edge radeon 26: 7 8 7 10 9 8 10 9 PCI-MSI-edge hda_intel 27: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 28: 7098 36221 19 24 19 20 28 20 PCI-MSI-edge eth0 NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts LOC: 22088 22355 9472 12483 6371 11086 5211 7987 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts PND: 0 0 0 0 0 0 0 0 Performance pending work RES: 61166 42503 6683 11920 2681 3534 4120 2460 Rescheduling interrupts CAL: 197 302 301 303 290 300 314 318 Function call interrupts TLB: 1406 1551 464 1749 350 897 485 563 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 1 1 1 1 1 1 1 1 Machine check polls ERR: 0 MIS: 0 -----------------interrupts------------------ To get to this point I've confirmed IOMMU is loading on boot. during boot a grep for AMD-Vi returns: -----------------AMD-Vi------------------ AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 AMD-Vi: Initialized for Passthrough Mode AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 -----------------AMD-Vi------------------ I've set: allow_unsafe_assigned_interrupts. I've set selinux to permissive I've set user and group for qemu to 'root' I've set clear_emulator_capabilites = 0 I've set relaxed_acs_check = 1 Finally, if there's a better forum to ask this question in please let me know. I've already tried #kvm and #virt on IRC with no reply yet. I've tried the CentOS 6.2 forums with no reply. Thanks, Chris P.S. I didn't subscribe, just sent this email. If by some odd chance, I can't see replies w/o subscribing someone please let me know. (sanders.chris(a)gmail.com)

1 0

[libvirt-users] Resize qcow2 disks
by Javi Legido 01 Jun '12

01 Jun '12

Good morning. I already tried: 1. http://michael.orlitzky.com/articles/resizing_a_kvm_or_qemu_disk_image.php Result: OS system can't see the disk space sudo qemu-img resize /var/lib/libvirt/images/mysql-1.qcow2 +8G ls -lath /var/lib/libvirt/images/mysql-1.qcow2 -rw------- 1 libvirt-qemu kvm 10G jun 1 15:35 /var/lib/libvirt/images/mysql-1.qcow2 # pvresize /dev/vda5 Physical volume "/dev/vda5" changed 1 physical volume(s) resized / 0 physical volume(s) not resized # lvextend -L8G /dev/template/root Extending logical volume root to 8.00 GiB Insufficient free space: 1630 extents needed, but only 0 available 2. http://blog.wpkg.org/2010/10/04/resizing-qcow2-images/ Result: OS system can't see the disk space My 3rd option is to install libguestfs-tools package, but I would like to avoid it since it's not part of Debian release. Any good step by step guide to enlarge a qcow2 + LVM virtual disk? Thanks

1 0