October 2012 - Users - libvirt List Archives

[libvirt-users] LXC guest memory recycling under RHEL6
by Rudy Godoy Guillén 14 Oct '12

14 Oct '12

Hello, I'm running a LXC guest using libvirtd under RHEL6. The guest has this particular memory behavior that I'm unable to explain. I've the following memory settings for this guest's memory. Inside the guest I'm running a Apache webserver serving PHP scripts and static content. <memory unit='GB'>2</memory> <currentMemory unit='GB'>2</currentMemory> <memtune> <hard_limit unit='GB'>2</hard_limit> </memtune> Now, when querying using virsh dominfo I see the amount of used RAM increases every second and it gets to the point where it reaches the limit causing the guest to be unresponsive. The current solution is destroying the guest process (virsh destroy) and starting again, but the behavior repeats again. As I understand what is happening is that the amount of memory used by Apache's processes (4 mpm forks) is never released so every request causes more memory comsumption reaching that point. If I'm correct on this what can I do to handle it? thanks! -- Rudy Godoy http://stone-head.org

1 0

[libvirt-users] What to configure for a guest with 2.2. kernel ...
by Stefan G. Weichinger 13 Oct '12

13 Oct '12

Greetings, libvirt-users ... I ask for help with virtualizing an ancient machine with a linux kernel 2.2. I already succeeded doing that but I face random performance issues and I somehow get lost in all the settings and options. I am using Virtual Machine Manager: * I can't chose something like Linux for the OS and 2.2 for the kernel. Does the combination "linux/2.4 kernel" work or should I choose "Other" or "Generic" ? * Later there I get a choice of "Architektur" (or "architecture" ? german here): for a 32bit-guest, should it be "i686" to reflect the environment for the guest or "x86_64" to fully use the potential of the host? Please forgive my questions, maybe they are FAQ somewhere, I really fiddled a lot already ... Thanks, Stefan

2 5

[libvirt-users] Libvirt mpiexec networking issue
by Shawn Furrow 12 Oct '12

12 Oct '12

Hi all, Not sure if this is the best place to put this question since I'm not sure if it's a Libvirt issue but... I currently have two VMs up with networking and I can successfully ssh to and from each VM and I have confirmed that I can successfully download things from the internet. However, when trying to run mpiexec (which uses ssh), the connection fails and gives me the following errors: [proxy:0:0@guestVM] HYDU_sock_connect (./utils/sock/sock.c:188): unable to connect from "guestVM" to "guestVM" (Connection refused) [proxy:0:0@guestVM] main (./pm/pmiserv/pmip.c:205): unable to connect to server guestVM at port 56514 (check for firewalls!) Just so it is clear, I know that the two guests host names are the same (they are clones) but I am giving explicit IP address for the connection so it should not be an issue. Does any one know if there is something unique with how Libvirt networking is set up that would cause such an error? I have tried checking for firewalls and there don't seem to be any. Thanks, Shawn -- Virginia Tech Bradley Department of Electrical and Computer Engineering B.S. Electrical Engineering B.S. Computer Engineering

1 1

[libvirt-users] libvirt java api create volume bug?
by zhijun liu 12 Oct '12

12 Oct '12

hi,all I use libirt Java AP { pool.storageVolCreateXML(xml,0)} to create a volume ,notice:here I define the format is "qcow2", the xml file is : <volume> <name>volume8</name> <capacity unit="KB">512000</capacity> <target> <format type="qcow2" /> </target> </volume> when use command check the volume's format, root@60:/dev/vgtest2# qemu-img info volume8 image: volume8 file format: raw virtual size: 500M (524288000 bytes) disk size: 0 I think this is a bug.can you fix it? the libvirt version is 0.9.8 libivrt-java version is 0.4.9 os:ubuntu12.04 thanks liuzhijun

1 0

[libvirt-users] Libvirt Error guest wont start
by Shawn Furrow 12 Oct '12

12 Oct '12

Hi all, I have been using Libvirt for several months now and I have only had minimal problems. I had a particular setup and was starting up multiple guests just fine. However, with seemingly no changes I now get the following error when trying to start a guest: virsh start guest0 error: Failed to start domain guest0 error: internal error Process exited while reading console log output: Supported machines are: pc Standard PC (alias of pc-0.12) pc-0.12 Standard PC (default) pc-0.11 Standard PC, qemu 0.11 pc-0.10 Standard PC, qemu 0.10 isapc ISA-only PC Apparently, the machine argument settings were changed in recent versions of Libvirt. Or at least that is what it seems. My guest's OS settings were: <os> <type arch='x86_64' machine='pc-1.1'>hvm</type> <boot dev='hd'/> </os> After getting this error I tried setting the machine argument to one of the "supported" ones. Then I get this error: virsh start guest0 error: Failed to start domain guest0 error: Unable to read from monitor: Connection reset by peer Anyone have any ideas as to why this happened all of a sudden? I was not having any problems before. Thanks, Shawn -- Virginia Tech Bradley Department of Electrical and Computer Engineering B.S. Electrical Engineering B.S. Computer Engineering

3 4

[libvirt-users] virsh start failed (Failed to query file context on ...)
by Binknight 11 Oct '12

11 Oct '12

hi all, I try to follow the instructions in http://libvirt.org/drvlxc.html to config libvirt-lxc, but failed when starting the lxc. The domain config file: # cat b.xml <domain type='lxc'> <name>b</name> <memory>32768</memory> <os> <type>exe</type> <init>/bin/sh</init> </os> <vcpu>1</vcpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/libexec/libvirt_lxc</emulator> <filesystem type='mount'> <source dir='/data/lxc/centos6'/> <target dir='/'/> </filesystem> <interface type='network'> <source network='default'/> </interface> <console type='pty' /> </devices> </domain> then define it: # virsh --connect lxc:/// define b.xml Domain b defined from b.xml then start: # virsh --connect lxc:/// start b error: Failed to start domain b error: internal error guest failed to start: 2012-10-10 09:56:17.369+0000: 452722: info : libvirt version: 0.9.10, package: 21.el6_3.4 (CentOS BuildSystem <http://bugs.centos.org>, 2012-08-23-18:28:26, c6b9.bsys.dev.centos.org) 2012-10-10 09:56:17.369+0000: 452722: error : lxcControllerRun:1484 : Failed to query file context on /data/lxc/centos6: No data available It's the filesystem mount section that cause this problem. The tutorial says the path '/data/lxc/centos6' should be "private root filesystem (perhaps hand-crafted using busybox, or installed from media, debootstrap, whatever)", but I am not quite clear about what this path should be. In my case, the "/data/lxc/centos6" is the root of template downloaded from http://wiki.openvz.org/Download/template/precreated. # pwd /data/lxc/centos6 # ls bin boot dev etc fastboot home lib media mnt opt proc root sbin selinux srv sys tmp usr var Can someone elaborate what should <source dir='/data/lxc/centos6'/> be? many thanks

1 0

[libvirt-users] can not connect hypervisor using libvirt-0.9.8 on windows
by xuanmao_001 10 Oct '12

10 Oct '12

Hi, Eric: I compiled libvirt-0.9.8 source code with the msys environment on windows xp. the compiltion was successed. but when I connect the remote host using virsh.exe, it occured error like: error: Failed to connect to the hypervisor error: Unable to set close-on-exec flag: No such file or directory Is there something wrong? give me some help, thanks! xuanmao_001

3 4

[libvirt-users] network setup
by anita.sivakumar＠wipro.com 09 Oct '12

09 Oct '12

Hi All, I am a newbie to libvirt. I am trying to set up a Lxc container using a nat based network. I am able to create the container and log into it. But I don't see any interface created by default in the container. In other words my ifconfig inside the container does not show up any interfaces even if I run 'ifconfig lo up' for a loop back interface. Also I don't have any dhcp configured in my machine. I am not sure why this is happening... These are my network and domain configurations. Any help will be highly appreciated. <network> <name>mynetwork</name> <forward mode="nat" dev="em2"/> <bridge name="virbr1" /> <ip address="192.168.123.1" netmask="255.255.255.0"> <dhcp> <range start="192.168.123.2" end="192.168.123.10" /> <host mac="18:03:73:F8:8A:75" name="vm100" ip="192.168.123.3"/> </dhcp> </ip> </network> Domain xml: <domain type='lxc'> <name>helloworld</name> <memory>102400</memory> <os> <type>exe</type> <init>/bin/sh</init> </os> <devices> <console type='pty'/> </devices> <interface type='network'> <source network='mynetwork'/> <mac address="18:03:73:F8:8A:75"/> <target dev='vm100'/> </interface> </domain> Regards, Anita

1 0

[libvirt-users] network problem
by Evaggelos Balaskas 07 Oct '12

07 Oct '12

Hi, i have a lvm partition that i need to share from the host server to the virtual machines. em1: 10.0.0.251 em2: 10.0.0.252 macvtap:em1 10.0.0.249 macvtap:em2 10.0.0.250 With identical configs (so i believe that they are) from VM win2003 i can ping to all the above IPs and open the samba share as a map drive. >From VM: win2008 i can ping to VMwin2003 but not at hosts IPs .251 & 252. I have attached some info on my setup. Plz advice. -- Evaggelos Balaskas - Unix System Engineer http://gr.linkedin.com/in/evaggelosbalaskas

1 0

[libvirt-users] alias as volume names for multipath storrage pools
by Michael Menge 05 Oct '12

05 Oct '12

Hi, I use virt-manager 0.9.4 and libvirt 0.9.13-0 and have configured a multipath storage pool. In the storage management window of virtmanager, only the short device name "dm-1" is shown as volumename. Is there a way to display the alias name or the path in thes storage window, as example_vm_root oder /dev/mapper/example_vm_root is more informative as dm-1 Regards Michael Menge -------------------------------------------------------------------------------- M.Menge Tel.: (49) 7071/29-70316 Universität Tübingen Fax.: (49) 7071/29-5912 Zentrum für Datenverarbeitung mail: michael.menge(a)zdv.uni-tuebingen.de Wächterstraße 76 72074 Tübingen

2 2

[libvirt-users] error: authentication failed: Authorization requires authentication but no agent is available
by Yih Chuang 05 Oct '12

05 Oct '12

I ran into this error. Any way to fix it? [vmcuser@rhel60h207kvm .ssh]$ virsh -c qemu+ssh:// vmcuser(a)9.10.110.241/system list --all error: authentication failed: Authorization requires authentication but no agent is available. error: failed to connect to the hypervisor Here is my settings different from default: [root@rhel60e201c libvirt]# diff libvirtd.conf libvirtd.conf.old 81c81 < unix_sock_group = "vmcuser" --- > #unix_sock_group = "libvirt" 88c88 < unix_sock_ro_perms = "0777" --- > #unix_sock_ro_perms = "0777" 98c98 < unix_sock_rw_perms = "0770" --- > #unix_sock_rw_perms = "0770" 129c129 < auth_unix_ro = "none" --- > #auth_unix_ro = "none" [root@rhel60e201c libvirt]# diff qemu.conf qemu.conf.old 151c151 < user = "vmcuser" --- > #user = "root" 154c154 < group = "vmcuser" --- > #group = "root" Thanks. --Yih

1 0

[libvirt-users] no callback on VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE in 0.10.2
by Ben Clay 04 Oct '12

04 Oct '12

I'm trying to track balloon growth after issuing a setmem command to a KVM guest with libvirt 0.10.2 and qemu-kvm 0.12.1.2 on CentOS 6.3. libvirt 0.10.2 was built from tar today and appears to be working fine. The guest is running CentOS 6.3 as well. Using the provided test programs under examples/domain-events/ in C and Python, I'm not seeing VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE ever tick, although I do see other events like VIR_DOMAIN_EVENT_ID_LIFECYCLE, VIR_DOMAIN_EVENT_ID_REBOOT, and VIR_DOMAIN_EVENT_ID_RTC_CHANGE. The balloon is definitely changing, and is reflected by both virsh -c qemu:///system dommemstat <dom> and free inside the guest. Here's the balloon in my config for reference: <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> Is my understanding incorrect of what VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE is? Is there something else this event is tracking, other than a virsh -c qemu:///system setmem <dom> <mem in KB> command and/or subsequent balloon movement inside the guest? Or, is my old version of qemu-kvm not passing this event back to libvirt? The latter doesn't seem correct because I'm getting seemingly-valid values from dommemstat - ie, if I setmem 200MB when the guest OS and applications are consuming 300MB, it reports near 300MB (and the guest no longer responds) instead of just parroting the 200MB value I fed it. Thanks! Ben Clay rbclay(a)ncsu.edu

2 3

[libvirt-users] Problems connecting with a remote VirtualBox server
by john Sanabria 04 Oct '12

04 Oct '12

Hi, I want to connect to my VirtualBox hypervisor using a string connection similar to this virsh -c vbox+ssh://localhost/session but it does not work however I can run virsh -c vbox:///session successfully. josanabr@leader:~$ virsh -c vbox+ssh://localhost/session error: End of file while reading data: : Input/output error error: failed to connect to the hypervisor josanabr@leader:~$ virsh -c vbox:///session Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # I have not modified any libvirt configuration file. I appreciate your feedback. -- John Sanabria - Profesor de la EISC Universidad del Valle

1 0

[libvirt-users] IPv4 routed virtual networks
by Gene Czarcinski 04 Oct '12

04 Oct '12

OK, either I have taken a stupid pill and am missing something basic or routed network do not work. I assume that, if they did work, it would be in more or less that same manner as a nat network as far as ping'ing, ssh'ing, etc. to another real host on the same real LAN as the virtualization host. At least that is what I believe I should expect. I have googled for info and everything says that it should work. On of the referenced documents was this: http://berrange.com/posts/2009/12/13/routed-subnets-without-nat-for-libvirt… I checked through everything and it all matches what is in the document. I can go from the guest to the host (ping, ssh, etc) but not from that guest to another real host on the same real LAN. I am patching the relevant info below: ---------------------------------- net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.p32p1.forwarding = 1 net.ipv4.conf.virbr8.forwarding = 1 -------------------------------- <network> <name>routed</name> <uuid>1b2a0197-e708-165c-f266-6822e73cfbdd</uuid> <forward dev='p32p1' mode='route'> <interface dev='p32p1'/> </forward> <bridge name='virbr8' stp='on' delay='0' /> <mac address='52:54:00:B9:59:49'/> <domain name='routed'/> <ip address='192.168.123.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.123.128' end='192.168.123.254' /> </dhcp> </ip> </network> ------------------------------- Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT udp -- virbr8 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- virbr8 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- virbr8 * 0.0.0.0/0 0.0.0.0/0 udp dpt:67 0 0 ACCEPT tcp -- virbr8 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:67 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- p32p1 virbr8 0.0.0.0/0 192.168.123.0/24 0 0 ACCEPT all -- virbr8 p32p1 192.168.123.0/24 0.0.0.0/0 0 0 ACCEPT all -- virbr8 virbr8 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- * virbr8 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 REJECT all -- virbr8 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ------------------------------ This is Fedora 17 with an updated libvirt 0.10.1-4.fc17 [another system with the same "problem" is running libvirt 0.10.2-1.fc17]. Anyone know what is going on? BTW, I searched bugzilla for the comment containing the string routed filed against packages libvirt, qemu, qemu-kvm, or kvm ...Result .. no hits! If this is really a bug rather than something I did or did not do, then nobody is using routed virtual networks. BTW, I have a real F17 systems sitting between to networks on two different NICs and it routes things nicely, thank you very much. It does work but not for the virtual networks. I would really like it to be something I am missing. Gene

2 1

[libvirt-users] libvirt Java to connect at the XEN
by Felipe Oliveira Gutierrez 03 Oct '12

03 Oct '12

Hi people, I am new using libvirt for Java I created a class to test my conecction with XEN, but it is throwing a exception that I can't figure out how I solve this. Does anyone knoe how to configure it correctly? I cat use this class from the command line: $ javac -classpath /usr/java/jdk1.6.0_34/bin/libvirt-0.4.9.jar test.java $ java -classpath .:/usr/java/jdk1.6.0_34/bin/jna.jar:/usr/java/jdk1.6.0_34/bin/libvirt-0.4.9.jar test and it connect to the XEN. But when I put the code on my eclipse it doesn't work any more. ... conn = new Connect("xen:///", true); .... libvir: XML-RPC error : authentication failed: Error checking for authorization org.libvirt.unix.manage: Remote Exception invoking org.freedesktop.PolicyKit1.Authority.CheckAuthorization() on /org/freedesktop/PolicyKit1/Authority at name org.freedesktop.PolicyKit1: org.freedesktop.PolicyKit1.Error.Failed: Action org.libvirt.unix.manage is not registered exception caught:org.libvirt.LibvirtException: authentication failed: Error checking for authorization org.libvirt.unix.manage: Remote Exception invoking org.freedesktop.PolicyKit1.Authority.CheckAuthorization() on /org/freedesktop/PolicyKit1/Authority at name org.freedesktop.PolicyKit1: org.freedesktop.PolicyKit1.Error.Failed: Action org.libvirt.unix.manage is not registered level:VIR_ERR_ERROR code:VIR_ERR_AUTH_FAILED domain:VIR_FROM_RPC hasConn:false hasDom:false hasNet:false message:authentication failed: Error checking for authorization org.libvirt.unix.manage: Remote Exception invoking org.freedesktop.PolicyKit1.Authority.CheckAuthorization() on /org/freedesktop/PolicyKit1/Authority at name org.freedesktop.PolicyKit1: org.freedesktop.PolicyKit1.Error.Failed: Action org.libvirt.unix.manage is not registered str1:authentication failed: %s str2:Error checking for authorization org.libvirt.unix.manage: Remote Exception invoking org.freedesktop.PolicyKit1.Authority.CheckAuthorization() on /org/freedesktop/PolicyKit1/Authority at name org.freedesktop.PolicyKit1: org.freedesktop.PolicyKit1.Error.Failed: Action org.libvirt.unix.manage is not registered str3:null int1:-1 int2:-1 Exception in thread "main" java.lang.NullPointerException at TestLibVirt.main(TestLibVirt.java:88) -- *-- Felipe Oliveira Gutierrez* *-- **lipe.82(a)gmail.com* <lipe.82(a)gmail.com> *-- https://sites.google.com/site/lipe82/Home/diaadia*

1 0

[libvirt-users] Request to participate to the list
by Felipe Oliveira Gutierrez 02 Oct '12

02 Oct '12

Hi, I need to use libvirt on my eucalyptus server. Can I go into to the list? Do I have to install libvirt-0.10.2.tar.gz alone, or I need to install libvirt-java-0.4.9.tar.gz after to developing codes using java? Bets Regards, Felipe -- *-- Felipe Oliveira Gutierrez* *-- **lipe.82(a)gmail.com* <lipe.82(a)gmail.com> *-- https://sites.google.com/site/lipe82/Home/diaadia*

2 1