May 2011 - Users - libvirt List Archives

[libvirt-users] converting save/dump output into physical memory image
by Andrew Tappert 05 Jun '12

05 Jun '12

A lot of people in the security community, myself included, are interested in memory forensics these days. Virtualization is a natural fit with memory forensics because it allows one to get access to a guest's memory without having to introduce any extra software into the guest or otherwise interfere with it. Incident responders are particularly interested in getting memory dumps from systems they're investigating. Virsh has "save" and "dump" commands for storing the state of a guest to a file on disk, but memory of KVM guests doesn't get saved in the "standard" input format for memory forensics tools, which is a raw physical memory image. (This is what you'd get via the classical "dd /dev/mem" approach or the contemporary equivalent using the crash driver; and VMware Server and Workstation produce .vmem files, which are such raw physical memory images, when a guest is paused or snapshotted.) In order to analyze the memory of Libvirt/KVM guests with my Linux memory forensics software, Second Look, I've created a tool for converting Libvirt-QEMU-save files (output of virsh save command) or QEMU-savevm files (output of virsh dump command) to raw physical memory images. I've got a basic working capability, though I'm still tracking down some problems with a guest allocated 8GB RAM--not all the memory seems to be present in the save or dump file. And I haven't tested very extensively yet, version support is limited to what I myself am currently running, etc. I'd like to know if this is a capability that others are interested in. Is this something that would be of interest to the Libvirt project if I were to contribute the code, or to the KVM project, or do you think it best exists as a separate project? I've also got a proof-of-concept tool for converting hibernate images to raw physical memory images. Perhaps a collection of tools for converting various memory dump formats would be a good project. Anyone else interested in this kind of stuff? As an author of commercial memory forensics software I've got a vested interest in availability of good memory acquisition capabilities. But there are a number of people working on FOSS Linux memory analysis tools, too... Andrew

4 5

[libvirt-users] Compatibility with Parallels Virtouzo
by Andreas Mauf 12 Jul '11

12 Jul '11

Hi, will libvirt work with the commercial parallels virtuozzo, too? Cause the linux version of virtuozzo is based on openvz, which ist supported by libvirt. Does someone have some experencies with that? Thanks for any feedback, Andreas -- SysEleven GmbH Rosenthaler Str. 34/35 10178 Berlin Firmensitz: Berlin Registergericht: AG Berlin Charlottenburg, HRB 108571 B Geschäftsführer: Marc Korthaus

2 7

Re: [libvirt-users] [Qemu-devel] Qcow2
by Stefan Hajnoczi 16 Jun '11

16 Jun '11

On Wed, May 18, 2011 at 5:18 PM, <arun.sasi1(a)wipro.com> wrote: > Hello Stefan, > > > > Thank you very much for considering my issue... > > > > Here is My problem... > > > > 1) I have 4 VM`s Running on Base server. > > 2) Base server is having 15GB RAM. > > 3) I can start all VM`s apart from my file server. > > 4) File server is having OS image and 1.2TB QCOW2 Image. > > 5) When I remove 1.2TB from xml file (vdb.img) I can start my server but > Data partition is null becase I have not added 1.2TB in XML. > > 6) Command I am using virsh start <Domain> > > 7) Even through virt-manager also I am not able to start the VM. Attached is > the error message Unfortunately the message gives no details: "libvirtError: internal error unable to start guest:" > 8) Keep on trying adding and removing and defining the XML after 2 Hrs I am > able to start. What did you change that made it work? > 9) Operating system Ubuntu 9.04 > > 10) I have 3 location file server having the same issue… even all file > servers are same configuration… Libvirt keeps log files for each VM under /var/log/libvirt/qemu/<domain>.log. You might find more detailed error information in that file and it will at least contain the qemu-kvm command-line used to launch the domain. Please take a look at that file and post the lines surrounding the error, especially the "starting up" log line. Have you verified that the .qcow2 image file is accessible, ownership and permissions should be the same as the image files of your other domains. Stefan > -----Original Message----- > From: Stefan Hajnoczi [mailto:stefanha@linux.vnet.ibm.com] > Sent: Wednesday, May 18, 2011 9:28 PM > To: Arun Sasi V (WI01 - Manage IT) > Subject: Re: Qcow2 > > > > On Wed, May 18, 2011 at 07:30:05PM +0530, arun.sasi1(a)wipro.com wrote: > >> The Guest VM which is larger example 1.2TB is not starting after the > >> base server reboot... Pleae help what needs to be do in this situation. > > > > You have not provided information on what is happening. Are you getting > > an error message during boot from the 1.2TB guest? Is the 1.2TB guest > > even being autostarted (use "virsh autostart <domain>" to enable > > autostart on a domain)? > > > > Please send support questions like this to qemu-devel(a)nongnu.org in the > > future. That way other people in the QEMU community can help too. > > > > Stefan > > Please do not print this email unless it is absolutely necessary. > > The information contained in this electronic message and any attachments to > this message are intended for the exclusive use of the addressee(s) and may > contain proprietary, confidential or privileged information. If you are not > the intended recipient, you should not disseminate, distribute or copy this > e-mail. Please notify the sender immediately and destroy all copies of this > message and any attachments. > > WARNING: Computer viruses can be transmitted via email. The recipient should > check this email and any attachments for the presence of viruses. The > company accepts no liability for any damage caused by any virus transmitted > by this email. > > www.wipro.com

3 12

[libvirt-users] unable to migrate guests
by PREETHI RAMESH 31 May '11

31 May '11

I'm new to libvirt and I'm facing a problem while migrating the guest domain. Both guest and host are of the same config(checked it with uname -a) Migrating using virsh, I get: virsh # migrate hda2 --desturi qemu+ssh://root@10.129.54.254/system root(a)10.129.54.254's password: error: operation failed: migration to 'tcp:kvm-lab:49168' failed: migration failed. The details of the problem are shown by the Virtual machine manger are: Unable to migrate guest: operation failed: migration to 'tcp:kvm-lab:49165' failed: migration failed Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 45, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/migrate.py", line 523, in _async_migrate vm.migrate(dstconn, migrate_uri, rate, live, secure, meter=meter) File "/usr/share/virt-manager/virtManager/domain.py", line 1141, in migrate self._backend.migrate(destconn.vmm, flags, newname, interface, rate) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 521, in migrate if ret is None:raise libvirtError('virDomainMigrate() failed', dom=self) libvirtError: operation failed: migration to 'tcp:kvm-lab:49165' failed: migration failed I've tried disabling apparmor and then migrating by- pre@pre-Inspiron-N4010:~$ sudo invoke-rc.d apparmor kill .: 35: Can't open /lib/apparmor/functions invoke-rc.d: initscript apparmor, action "kill" failed. and stopping iptables- pre@pre-Inspiron-N4010:~$ sudo /etc/init.d/iptables stop [sudo] password for pre: sudo: /etc/init.d/iptables: command not found Thank you.

1 0

[libvirt-users] no virtio in virt-manager
by Konstantin Svist 31 May '11

31 May '11

Hi, For some reason, I don't have virtio as an option in virt-manager on one of my computers. I'm using Fedora 14 with virt-preview repo, x64 architecture. It must be some package that I missed, does anyone know what it might be? Thanks

1 0

[libvirt-users] Forward routed network bridge on system's vlan
by RaSca 30 May '11

30 May '11

Hi all, I created a two node cluster that manages virtual machines with two servers connected via a cross cable on the network 10.0.0.0/24. I want that machines that runs on different servers in the network 172.16.0.0/24 can see all the others. To make this possible I've configured a vlan on each server: ... ... 5: eth1.111@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 5c:d9:98:b1:4c:4d brd ff:ff:ff:ff:ff:ff inet 172.16.0.0/24 brd 172.16.0.255 scope global eth1.111 inet6 fe80::5ed9:98ff:feb1:4c4d/64 scope link valid_lft forever preferred_lft forever ... ... And created a "lan" network, via virsh: <network> <name>lan</name> <uuid>8ac034c8-553d-b995-5a80-c1c711cb088c</uuid> <forward dev='eth1.111' mode='route'/> <bridge name='virbr1' stp='on' delay='0' /> <ip address='172.16.0.2' netmask='255.255.255.0'> </ip> </network> but with this setup "lan" never comes up because, for some reason, the network is locked: # virsh net-start lan error: Failed to start network lan error: internal error Network 172.16.0.1/255.255.255.0 is already in use by interface eth1.111 What is not clear to me is why, if I turn down the eth1.111 device, start the lan network, turn eth1.111 up and then force the brctl addif command, everything works: # ifdown eth1.111 Removed VLAN -:eth1.111:- # virsh net-start lan Network lan started # ifup eth1.111 Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 111 to IF -:eth1:- # brctl addif virbr1 eth1.111 # brctl show bridge name bridge id STP enabled interfaces br0 8000.6c626dd7518e no eth0 virbr0 8000.000000000000 yes virbr1 8000.5cd998b14c4d yes eth1.111 Why manually is possible to make things work? What am I ignoring? Thanks a lot, -- RaSca Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene! rasca(a)miamammausalinux.org http://www.miamammausalinux.org

1 0

[libvirt-users] libvirt boots from Knoppix-CD but not Debian-CD
by Christian Brandt 30 May '11

30 May '11

Debian Squeeze, libvirt 0.8.3, qemu-kvm 0.15.5 After configuring the cd image the bios screen shows: (tested with virsh, virt-install and virt-manager) Starting SeaBIOS (version 0.5.1-20110523_174945-brahms) Booting from CD-Rom 65MB medium found (bzw. whatever size) Boot failed: Could not read from CDROM (code 000c) ... the cd images (debian6-cd1, debian6-netinst, debian6-buisnesscard) have the correct md5sum an can be mounted, they simply do not boot. On the other hand, a recent knoppix ISO works well. Tested countless times. All access rights are 777. Only special feature: the host is a minimal installation done with debootstrap and contains not much else than libvirt, virt-manager and lxterminal. I am out of wit. Any ideas? -- Christian Brandt life is short and in most cases it ends with death but my tombstone will carry the hiscore

1 2

[libvirt-users] kvm.h not found
by --[ UxBoD ]-- 28 May '11

28 May '11

Hello all, Am attempting to compile the latest version of libvirt against a custom kernel 2.6.32.40 under CentOS 5.6 and see this in the configure output: checking linux/kvm.h usability... no checking linux/kvm.h presence... no checking for linux/kvm.h... no I have tried to change where it is looking using: CPPFLAGS="-I /home/compuser/linux-2.6.32.40/include" ./configure but end up with the same result. What am I doing wrong ? -- Thanks, Phil

2 1

[libvirt-users] polkit error when starting virt-manager on fedora14
by Alex 27 May '11

27 May '11

Hi, I have the following error in syslog when starting virt-manager and trying to connect: May 25 16:39:33 sage libvirtd: 16:39:33.525: error : remoteDispatchAuthPolkit:3846 : Policy kit denied action org.libvirt.unix.manage from pid 27509, uid 500, result: 512 I can manually start the kvm guest using virsh, but why can't virt-manager start them? This is on fedora14 x86_64: # rpm -qva|egrep 'virt|polkit|qemu' polkit-qt-0.99.0-2.fc14.x86_64 qemu-img-0.13.0-1.fc14.x86_64 python-virtkey-0.50-8.fc14.x86_64 qemu-kvm-0.13.0-1.fc14.x86_64 polkit-0.98-5.fc14.x86_64 polkit-gnome-0.97-4.fc14.x86_64 libvirt-python-0.8.3-9.fc14.x86_64 virt-viewer-0.2.1-1.fc13.x86_64 gpxe-roms-qemu-1.0.1-3.fc14.noarch virt-top-1.0.4-3.fc13.x86_64 libvirt-client-0.8.3-9.fc14.x86_64 virtuoso-opensource-6.1.2-1.fc14.x86_64 qemu-common-0.13.0-1.fc14.x86_64 polkit-desktop-policy-0.98-5.fc14.noarch redland-virtuoso-1.0.12-1.fc14.x86_64 python-virtinst-0.500.6-1.fc14.noarch libvirt-0.8.3-9.fc14.x86_64 qemu-system-x86-0.13.0-1.fc14.x86_64 virt-manager-0.8.7-2.fc14.noarch Please let me know what other information I can provide to fix this problem. I haven't rebooted yet, but I suspect at least that would fix it? Thanks, Alex

1 1

[libvirt-users] Failed to connect to Xen 4.1 using virsh
by YAO 27 May '11

27 May '11

Hi, I installed xen 4.1 and libvirt 0.9.1 on ubuntu 10.04 x86 when I tried "*virsh -c xen:/// list*", the terminal give me error: *error: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: No such file or directory* *error: failed to connect to the hypervisor* But when I tried "*sudo virsh -c xen:/// list*", there's different error: *error: unable to connect to 'localhost:8000': Connection refused* *error: failed to connect to the hypervisor* That really confused me. Do I need to start libvirtd like "*sudo libvirtd*"? cause "*virsh -c test:///default list*" is OK without it. I have started xencommons and xend, so I really don't know what I missed... Thanks, Yao

1 0

[libvirt-users] Replace library WinXPs by virtual WinXPs as on a linux Fedora system?
by Rob 25 May '11

25 May '11

Hi, The current situation: * About 500 university library PCs run WinXP as the main OS. I would like to achieve the following: * Replace the WinXP by a linux system (Fedora?) with virtualizationsoftware (KVM?) and have WinXP as a guest OS, in such a way that the users immediately boot into WinXP without noticing the virtualization. * Over the network I should still be able to access the host Fedora OS. Is this a feasible idea? If yes, can you give me some clues how to start? Thank you! Rob.

1 0

[libvirt-users] Replace library WinXPs by virtual WinXPs as on a linux Fedora system?
by Rob 25 May '11

25 May '11

Hi, The current situation: * About 500 university library PCs run WinXP as the main OS. I would like to achieve the following: * Replace the WinXP by a linux system (Fedora?) with virtualizationsoftware (KVM?) and have WinXP as a guest OS, in such a way that the users immediately boot into WinXP without noticing the virtualization. * Over the network I should still be able to access the host Fedora OS. Is this a feasible idea? If yes, can you give me some clues how to start? Thank you! Rob.

1 0

[libvirt-users] Xen and live migration with VIR_MIGRATE_PERSIST_DEST
by Thibault VINCENT 25 May '11

25 May '11

Hi, I'm having a hard time to figure how to perform Xen live migration using the python API with the same rate of success than virt-manager. # virsh version Compiled against library: libvir 0.8.3 Using library: libvir 0.8.3 Using API: Xen 3.0.1 Running hypervisor: Xen 3.2.0 The goal is to have the migration done in only one call, including a definition in the remote xend and undefinition from the source, which requires the VIR_MIGRATE_PERSIST_DEST and VIR_MIGRATE_UNDEFINE_SOURCE flags. Here's the code doing the migration: ---------- flags = (libvirt.VIR_MIGRATE_LIVE ^ libvirt.VIR_MIGRATE_PERSIST_DEST ^ libvirt.VIR_MIGRATE_UNDEFINE_SOURCE) uri = 'xenmigr://remote.host.com:8002' domain_obj.migrate(con_handle, flags, None, uri, 0) ---------- There are various problems that occur randomly, such as the VM completely disappearing 5 seconds after a succesful migration, but the main issue is with VIR_MIGRATE_PERSIST_DEST that doesn't seem to have any effect. The domU is not defined in xend and will vanish when destroyed or on hypervisor reboot. Could that be a known problem or related to a bug ? I'm really out of ideas. Any help appreciated, Thank you ! -- Thibault VINCENT - IT SmartJog S.A.S. - Groupe TDF - Pôle multimédia 27 Bd Hippolyte Marques, 94200 Ivry-sur-Seine, France Phone: +33.1.58.68.62.38 / Fax: +33.1.58.68.60.97

1 0

[libvirt-users] Java Bindings for libvirt
by Atul Gosain 25 May '11

25 May '11

Hi I looked at the java bindings for libvirt at http://libvirt.org/sources/java/ . Latest version here is 0.4.7 whereas the latest version of libvirtd is 0.9.1 . Does the java binding use latest libvirtd ? If not, can it be created easily ? Also, is there any plan to support HyperV support in future ? Thanks Atul

3 3

[libvirt-users] Live Migration UDP implementation
by prakash hr 24 May '11

24 May '11

Hi all, For my academic project to analyse the Performance of transport protocols in Live Migration of Virtual Machines.I have configured the live migration using tcp and I succeed the live migration. Now for my further remaining project work I need to do the same thing for the UDP implemataiton.When I changed the command in virsh, (My fianl command in TCP is virsh migrate --live ubuntu21 qemu+ssh://172.16.17.23/systemtcp:// 172.16.17.23:444) to udp it is not workng. It is given that qemu embeds user mode network stack which includes tcp,dhcp,udp.etc within the wemu process. Its giving the error no API found for UDP. ---Now i want to implement the patch file for migration using UDP if possible. ---Where I should change the API in order to perform the live migration using UDP. ---Is any patch file available so that modifying that patch file will perform the Live Migration using UDP. ---If implementation using not possible with UDP please give me the details why that can not be implemented and is any proofs for that reasons are appreciated. --Is there any other transport layer protocols can be used instead of TCP during Live migration.? --How about using RUDP instead of TCP. Thanking You in advance. Thanks and Regards Prakash H.R M.Tech Student at RVCE, Bangalore +91-8904301073

2 1

[libvirt-users] getting live migration to work..
by Jelle de Jong 24 May '11

24 May '11

Hello everybody, I am trying to get migration to work with the pacemaker VirtualDomain RA. However I hit some problems and went back to the basic. I also can't get virsh to do the migration so I am kind of stuck and can use some advice. # connection and general info and the migration tests http://paste.debian.net/117736/ # capabilities http://paste.debian.net/117745/ Thanks in advance, Kind regards, Jelle de Jong

1 1

[libvirt-users] Improving video for Windows7 kvm guest on fc14
by Alex 23 May '11

23 May '11

Hi, I have an existing windows7 x86_64 kvm guest running on fedora14 x86_64 with a Radeon HD5700 at 1680x1050, and would like to improve the resolution of the Windows guest. How can I change the Windows driver to something more capable than "standard vga"? It currently reports there is only 16MB of RAM at available at 1440x900. How can I increase this? I've tried using virsh or editing the xml directly, but it doesn't seem to be reflected in the guest. Some of the configuration options I've read in the documentation don't work with fedora14 and virt-manager, such as the acceleration options. This is my current configuration: <video> <model type='vmvga' vram='192000' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> How can I more effectively use the video card's capabilities in the Windows guest? Thanks, Alex

1 0

[libvirt-users] Migrate doesn't support copy-storage-all
by Abhishek Gupta 21 May '11

21 May '11

While using --copy-storage-all option while doing live migration I am getting following error : error: command 'migrate' doesn't support option --copy-storate-all I am using kvm hypervisor. Does that mean kvm doesn't support the option or libvirt doesn't provide support for the same with kvm as the hypervisor? -- Abhishek Student, IIT Delhi

1 0

[libvirt-users] Blank console and no boot
by Francesc Guasch 19 May '11

19 May '11

Hi. I was cloning a domain and now I can't boot the original nor the clone domain. Currently when I start one of those domains I can see only a blank screen. I am not sure what went wrong cloning. I was trying to use kpart to mount the new image and change info in the filesystem like hostname, ip and so. Anyway when I start the new or old domain: # virsh start --console thedomain Domain thedomain started Connected to domain thedomain Escape character is ^] And that's all.I see nothing with libvirt graphical console, nothing in the logs but this, that I guess it's the usual startup info: LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name .... ... This is qemu-kvm 0.12.5+noroms-0ubuntu7.1 on ubuntu server 10. Any hints so I can check what could have go wrong ? I am concerned about not being able to see what is going on. I guess there must be a way to start the domains and watch the boot process somehow. Is this possible ? thank you for you time

1 0

[libvirt-users] Trying to re-compile libvirt package on Ubuntu Lucid
by Lars Nordin 18 May '11

18 May '11

I'm trying to rebuild Ubuntu's libvirt packages to turn on ESX support. I've downloaded the Ubuntu source package for Lucid (updated Lucid package) dget -u http://archive.ubuntu.com/ubuntu/pool/main/libv/libvirt/libvirt_0.7.5-5ubun… I try and re-compile dpkg-buildpackage -rfakeroot -b DEB_BUILD_OPTIONS="--with-esx" fakeroot debian/rules binary and I get this error: ... testing with corrupted config: log_level Skipping test (due to Ubuntu buildd FTBFS): running libvirtd with a valid config file (2 seconds) FAIL: daemon-conf PASS: define-dev-segfault ... ==================== 1 of 37 tests failed ==================== make[4]: *** [check-TESTS] Error 1 make[4]: Leaving directory `/exp/h1/staff/lnordin/libvirt-pkg/libvirt-0.7.5/tests' make[3]: *** [check-am] Error 2 make[3]: Leaving directory `/exp/h1/staff/lnordin/libvirt-pkg/libvirt-0.7.5/tests' make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory `/exp/h1/staff/lnordin/libvirt-pkg/libvirt-0.7.5/tests' make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory `/exp/h1/staff/lnordin/libvirt-pkg/libvirt-0.7.5' make: *** [debian/stamp-makefile-check] Error 2 Anyone gone through this exercise before and would know how to get the packages re-built?

1 0

[libvirt-users] Howto set the option script=no for a tap device in the xml file
by Christian Spann 18 May '11

18 May '11

Hello, I am trying to run a virtual machine with qemu-kvm and libvirt as a user. In order to start the virtual machine I setup a tap device manually, add it to the bridge and activate it via ifconfig. But I cannot tell libvirt to not try to add the definded tap device to the bridge by itself. It always fails telling me it cannot add tap0 to br0. Thats the xml snippet for defining the network: <interface type='bridge'> <mac address='54:52:00:38:75:dd'/> <source bridge='br0'/> <target dev='tap0'/> <model type='virtio'/> </interface> Here I would like do define "script=no" to get an output like: -net tap,vlan=0,ifname=tap0,script=no when libvirt launches the vm. Regards, Christian -- Christian Spann - http://www-vs.informatik.uni-ulm.de/~spann

2 2

[libvirt-users] (no subject)
by Abhishek Gupta 17 May '11

17 May '11

Hi, I am using libvirt and virsh for my application. I am trying to manage snapshots for my infrastructure. All virsh commands are working fine like snapshot-create, delete, list, revert, current. But when I try to do the same using libvirt, I get out of memory error. Here are the commands that i execute on my host in a python shell... import libvirt conn = libvirt.open("qemu:///system") dom = conn.lookupByName("vmtest") *snap = dom.snapshotCreateXML(None,0);* The error is as follows libvir: Remote error : out of memory Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.6/dist-packages/libvirt.py", line 669, in snapshotCreateXML if ret is None:raise libvirtError('virDomainSnapshotCreateXML() failed', dom=self) libvirt.libvirtError: out of memory

2 2

[libvirt-users] Looking for a contact
by Dale Amon 17 May '11

17 May '11

I'm curious if there is anyone here from linode.

1 0

[libvirt-users] libvirt connection timeout
by Antoine COETSIER 16 May '11

16 May '11

Hi all, I would like to set a short connection timeout (only some seconds) when using libvirt in my Python program instead of the long default one. I found the C function: virEventAddTimeoutFunc() in the C libvirt API here: http://libvirt.org/html/libvirt-libvirt.html#virEventAddTimeoutFunc and eventInvokeTimeoutCallback(timer, callback, opaque) in libvirt.py around the line#150 but I do not know how to use it. I did not find any example on the net. I tried this but I get a segmentation fault: :-( import libvirt def timeout_cb_d(): print 'Timeout !' try: # try to set the libvirt timeout to 2 seconds: t = libvirt.eventInvokeTimeoutCallback(2, timeout_cb_d, "from dom0_class") except: ... Does anyone can give me a working example please? Antoine Coetsier

3 3

[libvirt-users] (no subject)
by Abhishek Gupta 16 May '11

16 May '11

Hello, In the documentation section of Python API Website it is written that the generation of python API and documentation is automated using generator.py file. This should produce the necessary files alongwith the documentation in libvirtclass.txt which should be present in docs or python folder. I executed generator.py file but was not able to find the libvirtclass.txt file to get the documentation. The easiest way I could think of was to manually browse the libvirt.py file for the available functions. Is there any other way of doing the same? -- Abhishek

2 1