- Devel - libvirt List Archives

[libvirt] Problem installing KVM Guest from command line
by aliahsan naqvi 01 Mar '09

01 Mar '09

Hi All >From past many days i am trying to install KVM Guest Machine from command line via virt-install.Below is many command i have testing this on Fedora 9 and fedora 10 but not able to do it. virt-install -n testing -r 256 -w bridge:virbr0 --location /mnt/Fedora-10-i386-DVD.iso --accelerate --os-type=linux --hvm --nographics -f /var/imgVM1 --force -x "console=ttyS0" I am installing from HTTP server.After give Network information.Following error comes.i have also tried with NFS and ftp but same result.It seem guest machine not able to get ip address.Because when i ping the ip address of the guest which is provided in Networking setting during guest installation.It was not pingable.And this http server is working fine.i can browse all the install directory with no problem and i have install other machine with the http install directory. I am getting following error after TCP/IP Manual/ DHCP Configuration Network Settings +-----------+ Error +------------+ | | | Unable to retrieve | | http://192.168.1.8/fedora | | /linux/releases/10/Fedora/i38 | | 6/os//images/install.img. | | | | +----+ | | | OK | | | +----+ | | | | | +--------------------------------+ Please Advise.Please let me if i am doing some thing wrong or this a bug. _________________________________________________________________ Windows Live™: Life without walls. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_032009

1 0

RE: [libvirt] Help with bridged networking
by Jesus Urroa 28 Feb '09

28 Feb '09

Hi, Thanks all for your help, I installed libvirt 0.6.0-4 and kvm 84-1 from fedora's rawhide and that solved the problem. However know I have a new problem I tried the other virtual machines and some of them just don't start, they seem to stop when the bios jumps to the disk and grub, any ideas? The only thing I can think of is to upgrade the host kernel but if I'm not wrong I have to upgrade to Fedora 9 or 10, and I would like to try something else before because I want to have everything running before leaving xen completely > Subject: RE: [libvirt] Help with bridged networking > From: lutter(a)redhat.com > To: observer1(a)hotmail.es > Date: Fri, 27 Feb 2009 08:48:13 -0800 > > On Fri, 2009-02-27 at 00:55 +0000, Jesus Urroa wrote: > > My mistake I see the lines for the ip config commented out in the file > > and I place them again > > Anyway I remove the card from the bridge to simplify the problem a > > little, this the output of brctl show for the bridge using only xen > > (no libvirt at all) and using kvm with libvirt and running only 2 vms: > > > > worknet 8000.feffffffffff no vif1.0 > > vif4.0 > > vif5.0 > > vif6.1 > > vif7.1 > > vif8.0 > > > > worknet 8000.00ff52959073 no vnet0 > > > > vnet3 > > With the non-Xen setup, your bridge should have the same IP address as > the enslaved NIC. > > What exactly is not working ? Can VM's on the same bridge ping each > other ? > > Did you add teh following iptables rule (to forward packages from the > bridge to the outside): > > # echo "-I FORWARD -m physdev --physdev-is-bridged -j ACCEPT" > /etc/sysconfig/iptables-forward-bridged > # lokkit --custom-rules=ipv4:filter:/etc/sysconfig/iptables-forward-bridged > # service libvirtd reload > > Otherwise, your VM;s can't talk to the outside. > > David > > _________________________________________________________________ Anímate y disfruta con los mejores juegos de Messenger, ¡descúbrelos! http://www.vivelive.com/juegos/

1 0

[libvirt] internal error Timed out while reading console log output
by jmandawg 28 Feb '09

28 Feb '09

Hi, I just compiled installed Libvirt from the latest git repo, and for some reason when I try to start a VM from virsh I get the following error: virsh # start XPTest error: Failed to start domain XPTest error: internal error unable to start guest: and the corresponding output from libvirtd running in verbose mode: 08:19:53.163: info : Received unexpected signal 17 08:20:00.083: info : Received unexpected signal 17 08:20:00.095: info : Received unexpected signal 17 08:20:03.200: error : internal error Timed out while reading console log output libvir: QEMU error : internal error Timed out while reading console log output 08:20:03.200: error : internal error unable to start guest: libvir: QEMU error : internal error unable to start guest: Here is the command virsh is trying to run from the Libvirt log file: LC_ALL=C PATH=/usr/bin:/bin:/root/bin:/usr/X11R6/bin:/usr/local/kvm/bin:/usr/local/sb in:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/root USER=root LOGNAME=root /usr/bin/kvm -S -M pc -m 512 -smp 1 -name XPTest -uuid 732fcba8-b71f-face-e067-cf8431fc94aa -monitor pty -pidfile /var/run/libvirt/qemu//XPTest.pid -localtime -no-acpi -boot c -drive file=/var/kvm-images/XPTest/XP_Test.img,if=ide,index=0,boot=on -net nic,macaddr=00:0c:29:f6:c4:f8,vlan=0,model=e1000 -net tap,fd=20,script=,vlan=0,ifname=vnet3 -serial none -parallel none -usb -usbdevice tablet -vnc 0.0.0.0:9 If I start the VM from the commandline manually using this command and then shutdown, I can successfully start it from Virsh qemu-system-x86_64 -no-acpi -m 512 -hda XP_Test.img \ -net nic,macaddr=00:0C:29:F6:C4:F8 \ -net tap \ -usb -usbdevice tablet \ -monitor unix:monitor,server,nowait \ -soundhw all \ -pidfile pid & virsh # version Compiled against library: libvir 0.6.0 Using library: libvir 0.6.0 Using API: QEMU 0.6.0 Running hypervisor: QEMU 0.9.1 Any help would be appreciated. Thanks, John

1 1

[libvirt] [PATCH]: Fix non-live migration failure
by Chris Lalancette 28 Feb '09

28 Feb '09

There is a logic error in the Qemu driver when doing a non-live migrate. During a non-live migrate, on the source host during the Perform step, we pause the domain; however, if there was ever a failure, we were forgetting to unpause the domain, meaning that the domain was paused forever. Add a flag to tell us when we should unpause the domain after a failure. Also, as pointed out by DV, we were unnecessarily using a snprintf to a buffer to execute qemu monitor commands, when we could get away with just sending a static string. Fix that as well. Signed-off-by: Chris Lalancette <clalance(a)redhat.com>

2 2

[libvirt] libvirt tls vnc
by Michael Kress 28 Feb '09

28 Feb '09

Hi, is there a comprehensive howto/tutorial you can recommend me on how to set up libvirt with vnc over tls properly? What I'm trying to do is to use vnc for production use outside my local network and therefore I'd like to secure the vnc sessions. I already made some attempts with ssvnc and Ultr@VNC (both windows clients) but these attemps all failed. I can't get the vnc server (launched by virt-install / kvm) to be displayed via tls. It all runs perfectly without tls. Thanx for any hints! Michael

4 16

[libvirt] using virsh remotely
by Andreas Rittershofer 28 Feb '09

28 Feb '09

I can use virsh as a command line tool, for exampe virsh list gives me the list of the running machines and I am back to the prompt. When I make virsh -c qemu+ssh://maschine-2/system list I get the list of the running machine on the remote machine-2 - but that's it, I am not back to the prompt automatically. I want virsh to behave used remotely as used locally - execute the command and go back to the prompt. How this can be done? mfg ar -- Hier könnte keine Signatur stehen.

2 2

[libvirt] adding bandwidth control support
by Max Zhen 27 Feb '09

27 Feb '09

My last post failed, resend... Max Zhen at 2008-12-24 18:39 wrote: > Hi, > > I'm working on adding bandwidth control support in > virt-install/virsh/libvirt on Xen. > This support can allow setting bandwidth control in dom0 (I'm working on > Solaris dom0 now) for virtual nic devices used in a domU. > I've attached my design in this email. > Basically, this design is about how to represent bandwidth limit > information in command line for virsh/virt-install and how to represent > it in current XML configuration file for a domU. > > Your comments will be highly appreciated :). > > Thanks, > Max > > There are a few things to do to achieve this goal: 1. extend current command line syntax of 'virsh attach-interface' 2. extend current command line syntax of 'virt-install' 3. define bandwidth representation in XML format For 1. I will change the current command line syntax to: virsh attach-interface <domain> <type> <source> [--target <target>] [--mac <mac>] [--script <script>] [--rate <rate-string>] So that we are able to specify bandwidth as "--rate 100M" in command line, like: #virsh attach-interface domu bridge bge0 --rate 100M In this case, bandwidth is specified as an integer with one of the scale suffixes K, M, or G for Kbps, Mbps, or Gbps. For 2. I will add one more option "--rate=rate-string" to current option set of virt-install command. Users can repeatedly add more than one 'rate' options to set bandwidth for multiple nic devices respectively, if needed. For example, with below command line, we start installing a domain with two nic devices whose bandwidth are set to 100Mb/s and 200Mb/s respectively: #virt-install -n snv105 -r 2048 -p --file=/root/snv105 --location=/solarisdvd.iso -b bge0 --rate=100M -b bge1 --rate=200M In this case, bandwidth is specified as an integer with one of the scale suffixes K, M, or G for Kbps, Mbps, or Gbps. For 3. All user specified bandwidth will be represented as part of interface element currently defined in XML configuration file. The new format looks like: <interface type='bridge'> <source bridge='e1000g1'/> <flowcontrol> <rate unit='megabit' period='second' value='100'/> </flowcontrol> </interface> So, I create a new element, "flowcontrol", inside "interface" element. Inside "flowcontrol", I provide bandwidth by setting "rate" element with three attributes, "unit", "period" and "value" to express the bandwidth limit. The supported unit can be 'gigabit', 'megabit' and 'kilobit'. The supported period can be 'second', 'millisecond' and 'microsecond'. And value is an integer to express the amount of data in unit allowed to be transfered in period of time. More elements can be added inside "flowcontrol" element, if we want to add more flow control policies in the future.

2 5

[libvirt] Help with bridged networking
by watcher lines 27 Feb '09

27 Feb '09

Hi, I have setup my virtual networks with initscripts like in this link: http://wiki.libvirt.org/page/Networking#Bridged_networking_.28aka_.22shared…, but there is no networking whitin any system either between vms or with the host and the vms. This setup is for kvm, but with Xen in Fedora 8 it works perfect, but xen is now deprecated in Fedora. This is my setup: /etc/sysconfig/network-scripts/ifcfg-worknet: # worknet bridge DEVICE=worknet BOOTPROTO=none BROADCAST=172.16.1.255 #HWADDR=00:50:56:C0:00:01 IPADDR=172.16.1.1 NETMASK=255.255.255.0 NETWORK=172.16.1.0 ONBOOT=yes TYPE=Bridge STP=off DELAY=0 With Xen this alone lets ip traffic pass between host and to allow dhcp and other protocols i have this line in my iptables: -A FORWARD -i worknet -j ACCEPT This is the software I'm using: libvirt-0.4.4-2.fc8 kvm-60-7.fc8 Thanks for your attention. _________________________________________________________________ Consigue gratis el nuevo Messenger. ¡Descárgatelo! http://download.live.com/

1 0

[libvirt] networking with two hosts
by Andreas Rittershofer 27 Feb '09

27 Feb '09

The following situation is given: Host A with VM1 and VM2 running. Host B with VM3 und VM4 running. Task 1.) Each VM must have network access to each other VM and to the outside. Task 2.) When one host fails, all VMs are running on the remainig host and 1.) must still be fulfilled. Does somebody has any hints about realising this scenario with libvirt and KVM? mfg ar -- Hier könnte keine Signatur stehen.

3 7

[libvirt] Adding VirtualBox support to libvirt
by Pritesh Kothari 27 Feb '09

27 Feb '09

Hi, I am in the process of adding support for virtualbox in libvirt. Basically Virtualbox exports its API through XPCOM. Now to simplify things I was thinking of using C++ and already existing xpcom component in virtualbox but since libvirt exports C API i am not sure if i should use C++ or stick to plain C. I would like to request the libvirt community for its comment on this. Regards, Pritesh

4 10