- Devel - libvirt List Archives

[libvirt] [PATCH] Recognize available media in nodedev hal driver
by Cole Robinson 02 Mar '09

02 Mar '09

The host device hal driver can't tell when a storage device has media available, the culprit being an incorrect return value check. The attached patch fixes this. Unfortunately the driver also doesn't properly detect media eject and media inserted hal events. I've been poking at this but it's a more involved fix. Thanks, Cole

3 3

[libvirt] [PATCH] Mark defined networks as persistent
by Cole Robinson 02 Mar '09

02 Mar '09

We aren't setting the persistent bit when a network is defined, so 'destroy' makes them disappear (though they will reappear later since their persistent config is never removed). Attached patch fixes this. Thanks, Cole

3 5

[libvirt] [PATCH] Don't validate disk type in virsh attach-disk
by Cole Robinson 02 Mar '09

02 Mar '09

virsh attempts to validate the requested disk type, rather than just let the underlying driver do it. This was erroneously denying floppy device attaches. Patch attached. Thanks, Cole

3 8

[libvirt] [PATCH 0/6] Add device assignment related node device methods (v2)
by Mark McLoughlin 02 Mar '09

02 Mar '09

Hey, Okay, here's the patches again with the following changes: - Pass virConnectPtr to all pciDevice methods - Read the vendor/product ID from sysfs rather than supplying it to pciGetDevice() - Re-factor the Dettach/ReAttach() so that it can be more easily used with pciback - Add <hostdev managed='(yes|no)'> - Dettach and reset managed hostdev devices before starting a QEMU guest Cheers, Mark.

3 9

[libvirt] How to stop libvirt from deleting tap device after shutdown
by Matthias Dahl 02 Mar '09

02 Mar '09

Hi. I am currently setting up a new server machine which will host several kvm's managed largely by libvirt. The network setup though is done prior to libvirtd startup and shouldn't be touched by it. So currently everything works just fine with 0.6.0 except that libvirt deletes the tap device after I shut a kvm machine down which is something I naturally don't want. I looked through all the documentation I could find but I could not come up with a solution. Forgot to mention: all kvm machine are connected through a tap device with no bridge or whatsoever but 1:1 NAT. This done for performance reasons. As model I use "virtio". Any help would be greatly appreciated. Best regards, Matthias Dahl = XML File for one of the machines =========================================== <domain type='kvm'> <name>charon</name> <uuid>08a3af0e-f145-54c6-30a2-efdab5478523</uuid> <memory>2097152</memory> <currentMemory>524288</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/dev/diskspace/kvm_charon'/> <target dev='vda' bus='virtio'/> </disk> <interface type='ethernet'> <mac address='52:54:00:25:6f:3f'/> <script path='/bin/true'/> <target dev='charon_pvnet1'/> <model type='virtio'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> </console> </devices> </domain>

2 1

[libvirt] PATCH: Fix DBus thread safety
by Daniel P. Berrange 02 Mar '09

02 Mar '09

We are using DBus from multiple threads in libvirtd. We are not calling dbus_threads_init_default(). Very bad things result. Happy-crashy-daemon This patch fixes that, and also stops DBus messing around with SIGPIPE and also stops it calling exit() when the bus disconnects, so we can actually see the error & continue with life. Daniel diff -rup libvirt-0.6.0.orig/qemud/qemud.c libvirt-0.6.0.new/qemud/qemud.c --- libvirt-0.6.0.orig/qemud/qemud.c 2009-02-18 10:56:34.000000000 +0000 +++ libvirt-0.6.0.new/qemud/qemud.c 2009-02-18 12:52:18.000000000 +0000 @@ -860,6 +860,10 @@ static struct qemud_server *qemudNetwork if (auth_unix_rw == REMOTE_AUTH_POLKIT || auth_unix_ro == REMOTE_AUTH_POLKIT) { DBusError derr; + + dbus_connection_set_change_sigpipe(FALSE); + dbus_threads_init_default(); + dbus_error_init(&derr); server->sysbus = dbus_bus_get(DBUS_BUS_SYSTEM, &derr); if (!(server->sysbus)) { @@ -868,6 +872,7 @@ static struct qemud_server *qemudNetwork dbus_error_free(&derr); goto cleanup; } + dbus_connection_set_exit_on_disconnect(server->sysbus, FALSE); } #endif diff -rup libvirt-0.6.0.orig/src/node_device_hal.c libvirt-0.6.0.new/src/node_device_hal.c --- libvirt-0.6.0.orig/src/node_device_hal.c 2009-01-16 12:44:22.000000000 +0000 +++ libvirt-0.6.0.new/src/node_device_hal.c 2009-02-18 12:52:48.000000000 +0000 @@ -685,6 +685,9 @@ static int halDeviceMonitorStartup(void) nodeDeviceLock(driverState); /* Allocate and initialize a new HAL context */ + dbus_connection_set_change_sigpipe(FALSE); + dbus_threads_init_default(); + dbus_error_init(&err); hal_ctx = libhal_ctx_new(); if (hal_ctx == NULL) { @@ -696,6 +699,8 @@ static int halDeviceMonitorStartup(void) fprintf(stderr, "%s: dbus_bus_get failed\n", __FUNCTION__); goto failure; } + dbus_connection_set_exit_on_disconnect(dbus_conn, FALSE); + if (!libhal_ctx_set_dbus_connection(hal_ctx, dbus_conn)) { fprintf(stderr, "%s: libhal_ctx_set_dbus_connection failed\n", __FUNCTION__); -- |: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|

4 5

[libvirt] [PATCH] small fixes in storage_conf.c
by Ryota Ozaki 02 Mar '09

02 Mar '09

Hi, These patches fix: - missing VIR_FREE for the return value of virXPathString - wrong error message "missing owner element" where should be "missing group element" Signed-off-by: Ryota Ozaki <ozaki.ryota(a)gmail.com>

3 3

[libvirt] [PATCH] don't dereference uninitialized pointer
by Jim Meyering 02 Mar '09

02 Mar '09

>From a907d2da7e7f9d1f58009ff6a95454ac0eb2cbf1 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering(a)redhat.com> Date: Mon, 2 Mar 2009 10:10:02 +0100 Subject: [PATCH] don't dereference uninitialized pointer * src/storage_conf.c (virStoragePoolDefParsePerms): Initialize "ptr" to NULL. --- ChangeLog | 6 ++++++ src/storage_conf.c | 2 +- 2 files changed, 7 insertions(+), 1 deletions(-) diff --git a/ChangeLog b/ChangeLog index 12715f5..ede7e0d 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,9 @@ +2009-03-02 Jim Meyering <meyering(a)redhat.com> + + don't dereference uninitialized pointer + * src/storage_conf.c (virStoragePoolDefParsePerms): Initialize + "ptr" to NULL. + Fri Feb 27 17:15:00 CET 2009 Chris Lalancette <clalance(a)redhat.com> * src/qemu_driver.c: If there is a failure during offline migrate, diff --git a/src/storage_conf.c b/src/storage_conf.c index 70107a2..4a53ff4 100644 --- a/src/storage_conf.c +++ b/src/storage_conf.c @@ -381,7 +381,7 @@ virStoragePoolDefParsePerms(virConnectPtr conn, if (!mode) { perms->mode = 0700; } else { - char *end; + char *end = NULL; perms->mode = strtol(mode, &end, 8); if (*end || perms->mode < 0 || perms->mode > 0777) { virStorageReportError(conn, VIR_ERR_XML_ERROR, -- 1.6.2.rc1.285.gc5f54

2 2

[libvirt] Update on host interface configuration
by David Lutterkort 01 Mar '09

01 Mar '09

Hi, I thought I'd write an update of what I've been doing with the host interface configuration previously discussed[1] After talking with Dan Williams, who is working in NetworkManager, it is clear that the network interface functionality for libvirt is also useful for NM and would help them with handling system-wide interface configuration. To accomodate that, I will implement network interface configuration in a separate library (inspiringly called 'netcf', until somebody thinks of something catchier) and add public API to libvirt that will use netcf to do the actual work. One thorny issue is how libvirt's public API and netcf's public API relate to each other, especially since both libvirt and netcf use XML descriptions to describe network interfaces (netcf does that for exactly the same reasons that libvirt does it, since it will have to deal with similar stability issues) For the time being, I am assuming that the two XML descriptions are identical, with no guarantee that that will always be the case. If and when we run into a case where libvirt's and netcf's needs diverge, we'll break that identity. On the implementation side, that means that, for now, netcf will do all the validation and pass errors back to libvirt. In more concrete terms, I put up a git repo[2] for netcf. There's hardly any code in there, the things I'd particularly appreciate review/feedback on are * the RelaxNG specification of the interface XML (in xml/interface.rng) together with examples of such interface specifications (in tests/interface/) * the (very rough) sketch of the netcf public API, which should map almost 1-1 to the public libvirt API in src/netcf.h I know that the XML schema doesn't cover everything we've discussed in [1], but I think it's a small enough subset to tackle relatively quickly and large enough to be useful. So, one of the main things to think about when looking at the schema is places where the schema would make it hard to make desirable enhancements in the near future (like Marius' point about default routes/gateways) One important point about the model of network config in the schema is that it is centered around what NM calls a 'connection' (though it's called 'interface' in the schema): a grouping of the components that make up the interface the user really cares about (a bridge or a bond) together with the components subordinate to it (e.g. ethernet interfaces enslaved to the bridge or bond) It's those groups that netcf deals with, i.e. if eth0 is enslaved to br0, netcf won't list eth0 as an interface, but only br0, with eth0 as a subinterface. For the implementation, netcf will have a separate backend for each network configuration regime (initscripts for Fedora/RHEL, /etc/network/interfaces for Debian, ...) - once the initscripts backend is done, I'd be very grateful for contributions for the other backends. To sketch out the initscripts implementation, I wrote two XSL stylesheets, xml/initscripts-get.xml that goes from interface XML -> initscripts files (via Augeas) and xml/initscripts-put.xml to go the other way for querying; I'll use those for the core of the initscripts backend. Whether other backands can be done in a similar manner is TBD. David [1] https://www.redhat.com/archives/libvir-list/2009-January/msg00350.html [2] http://git.et.redhat.com/?p=netcf.git;a=tree

5 10

[libvirt] virsh and api
by Zvi Dubitzky 01 Mar '09

01 Mar '09

Hi How about adding the following info to the virsh / dominfo command ( and to the programmable libvirt API:): - IP address of the domain in case the host was configured as a bridge - cpu utilization (at least for Linux) Is that possible ? thanks Zvi Dubitzky Virtualization and System Architecture Email:dubi@il.ibm.com IBM Haifa Research Laboratory Phone: +972-4-8296182 Haifa, 31905, ISRAEL

1 0