- Devel - libvirt List Archives

[libvirt] Fwd: Re: [PATCH] virsh domxml-from-native to treat SCSI as the bus type for pseries by default
by Shivaprasad bhat 05 Nov '13

05 Nov '13

Hi Eric, I realised you have not received my mails due to some problem with IMAP server. I sent out second version of my patch with your suggestions last week. https://www.redhat.com/archives/libvir-list/2013-October/msg01110.html Could you please help me reviewing the V2 ? Thanks and Regards, Shiva ---------- Forwarded message ---------- From: Shivaprasad G Bhat <sbhat(a)linux.vnet.ibm.com> Date: Tue, Nov 5, 2013 at 12:07 PM Subject: Fwd: Re: [libvirt] [PATCH] virsh domxml-from-native to treat SCSI as the bus type for pseries by default To: Shivaprasad G Bhat <shivaprasadbhat(a)gmail.com> -------- Original Message -------- Message-ID: <526E1EB5.5050902(a)linux.vnet.ibm.com> <526E1EB5.5050902(a)linux.vnet.ibm.com> Date: Mon, 28 Oct 2013 13:52:13 +0530 From: Shivaprasad G Bhat <sbhat(a)linux.vnet.ibm.com> <sbhat(a)linux.vnet.ibm.com> User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: Eric Blake <eblake(a)redhat.com> <eblake(a)redhat.com>, Shivaprasad G Bhat <shivaprasadbhat(a)gmail.com> <shivaprasadbhat(a)gmail.com>, libvir-list(a)redhat.com, zhlcindy(a)linux.vnet.ibm.com CC: bpradip(a)in.ibm.com Subject: Re: [libvirt] [PATCH] virsh domxml-from-native to treat SCSI as the bus type for pseries by default References: <20131024070709.13853.10308.stgit(a)localhost.localdomain><20131024070709.13853.10308.stgit(a)localhost.localdomain> <5268CB8C.3090404(a)redhat.com> <5268CB8C.3090404(a)redhat.com> In-Reply-To: <5268CB8C.3090404(a)redhat.com> <5268CB8C.3090404(a)redhat.com> Content-Type: multipart/alternative; boundary="------------050306080405050600030204" Thanks Eric and Li. Sending out the v2 with the recommended changes. Regards, Shiva On 10/24/2013 12:56 PM, Eric Blake wrote: On 10/24/2013 08:07 AM, Shivaprasad G Bhat wrote: From: Shivaprasad G Bhat <sbhat(a)linux.vnet.ibm.com> <sbhat(a)linux.vnet.ibm.com> The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the disk types. Pseries platform needs this to appear as SCSI instead of IDE. Signed-off-by: Shivaprasad G Bhat <sbhat(a)linux.vnet.ibm.com> <sbhat(a)linux.vnet.ibm.com> --- src/qemu/qemu_command.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index abb62e9..728409f 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -9995,6 +9995,7 @@ error: static virDomainDiskDefPtr qemuParseCommandLineDisk(virDomainXMLOptionPtr xmlopt, const char *val, + virDomainDefPtr dom, TAB damage. Please run 'make syntax-check' and fix that. int nvirtiodisk, bool old_style_ceph_args) { @@ -10018,7 +10019,11 @@ qemuParseCommandLineDisk(virDomainXMLOptionPtr xmlopt, if (VIR_ALLOC(def) < 0) goto cleanup; - def->bus = VIR_DOMAIN_DISK_BUS_IDE; + if (((dom->os.arch == VIR_ARCH_PPC64) && + dom->os.machine && STREQ(dom->os.machine, "pseries"))) + def->bus = VIR_DOMAIN_DISK_BUS_SCSI; + else + def->bus = VIR_DOMAIN_DISK_BUS_IDE; I'm wondering if we should reuse our post-XML-parse callbacks here, rather than open-coding a machine check. In other words, since we already have code that knows how to do per-machine fixups to a domain definition, we should be reusing those instead of open-coding duplicate checks. (Actually, domxml-from-native needs a LOT of TLC, there's much more wrong with it, even on non-pseries machines, than what you are trying to patch). -- libvir-list mailing listlibvir-list@redhat.comhttps://www.redhat.com/mailman/listinfo/libvir-list

1 0

[libvirt] [PATCHv2 0/3] glusterfs storage pool
by Eric Blake 05 Nov '13

05 Nov '13

Fixes some problems identified in v1: https://www.redhat.com/archives/libvir-list/2013-October/msg01354.html Eric Blake (3): storage: initial support for linking with libgfapi storage: document gluster pool storage: implement rudimentary glusterfs pool refresh configure.ac | 21 +++ docs/formatstorage.html.in | 11 +- docs/schemas/storagepool.rng | 21 +++ docs/storage.html.in | 90 ++++++++++- libvirt.spec.in | 15 ++ m4/virt-gluster.m4 | 26 +++ po/POTFILES.in | 1 + src/Makefile.am | 9 ++ src/conf/storage_conf.c | 20 ++- src/conf/storage_conf.h | 3 +- src/storage/storage_backend.c | 6 + src/storage/storage_backend.h | 6 +- src/storage/storage_backend_gluster.c | 228 +++++++++++++++++++++++++++ src/storage/storage_backend_gluster.h | 29 ++++ tests/storagepoolxml2xmlin/pool-gluster.xml | 8 + tests/storagepoolxml2xmlout/pool-gluster.xml | 11 ++ tests/storagepoolxml2xmltest.c | 1 + 17 files changed, 493 insertions(+), 13 deletions(-) create mode 100644 m4/virt-gluster.m4 create mode 100644 src/storage/storage_backend_gluster.c create mode 100644 src/storage/storage_backend_gluster.h create mode 100644 tests/storagepoolxml2xmlin/pool-gluster.xml create mode 100644 tests/storagepoolxml2xmlout/pool-gluster.xml -- 1.8.3.1

2 5

[libvirt] libvirt-1.4.4 is out
by Daniel Veillard 05 Nov '13

05 Nov '13

As planned I tagged the git tree earlier today and pushed tarballs and rpms to the usual place: ftp://libvirt.org/libvirt/ The release is a bit smaller than usual in terms of commited patches probably due to a large part of the team travelling to KVM Forum ! This is mostly a bug fix and maintainance release, it includes 4 important security patches in addition to the usual set of bug and leak fixes. To note the added support for ARM 64 bits arch, and quite a large set of portability fixes: Features: - Add support for AArch64 architecture (Pranavkumar Sawargaonkar) - Various improvements on test code and test driver (many people) Security: - Don't link virt-login-shell against libvirt.so (CVE-2013-4400) (Daniel P. Berrange) - Close all non-stdio FDs in virt-login-shell (CVE-2013-4400) (Daniel P. Berrange) - Only allow 'stderr' log output when running setuid (CVE-2013-4400) (Daniel P. Berrange) - Fix perms for virConnectDomainXML{To,From}Native (CVE-2013-4401) (Daniel P. Berrange) Documentation: - generate links from plain text documentation (Claudio Bley) - define style of code blocks inside descriptions (Claudio Bley) - add class "description" to div's containing descriptions (Claudio Bley) - process code blocks similar to Markdown (Claudio Bley) - fix typos in formatnwfilter (Chen Hanxiao) - fix a typo in formatdomain (Chen Hanxiao) - virsh: fix doc typos (Eric Blake) - maint: typo fixes (Eric Blake) - fix some typos about 'informations' (Chen Hanxiao) - fix a typo in formatdomain (Chen Hanxiao) - Expand description of host-model CPU mode (Jiri Denemark) - virsh: fix a typo in virsh-domain (Chen Hanxiao) - storage: document existing pools (Eric Blake) - remote-driver: Fix 'leav' typo in comment (Christophe Fergeau) - change the minimum weight description for blkio (Chen Hanxiao) - Add some notes about secure usage of libvirt (Daniel P. Berrange) - lxc: Fix an improper comment in lxc_process.c (Chen Hanxiao) - nwfilter: fix a typo in nwfilter_gentech_driver.c (Hongwei Bi) - cgroup: fix a comment typo in vircgroup.c (Chen Hanxiao) - fix typo in HACKING (Chen Hanxiao) - aclpolkit: Fix a heading typo (Cole Robinson) Portability: - virnetsocket: fix getsockopt on FreeBSD (Ryota Ozaki) - MacOS: Handle changes to xdrproc_t definition (Doug Goldstein) - fix api changes in xen restore (Bamvor Jian Zhang) - MacOS: Re-add support for QEMU backend (Doug Goldstein) - rpc: Retrieve peer PID via new getsockopt() for Mac (Doug Goldstein) - build: fix build of virt-login-shell on systems with older gnutls (Jim Fehlig) - build: fix linking virt-login-shell (Jim Fehlig) - nodeinfo: fix physical memory size on Mac OS X (Ryota Ozaki) - Add stub getegid impl for platforms lacking it (Daniel P. Berrange) - better error checking for LOCAL_PEERCRED (Brian Candler) - Add support for detecting PPC little endian arches (Daniel P. Berrange) - xenapi: Fix build after const correctnes changes (Peter Krempa) - rpc: Fix getsockopt on Snow Leopard and lower (Doug Goldstein) - build: fix linker error on FreeBSD (Giuseppe Scrivano) - tests: avoid compile failure on linux kernels older than 2.6.19 (Giuseppe Scrivano) - nodeinfo: make freebsdNodeGetCPUCount work on Mac OS X (Ryota Ozaki) - rpc: fix getsockopt for LOCAL_PEERCRED on Mac OS X (Ryota Ozaki) - build: fix build on 32-bit platforms (Eric Blake) - build: fix build on RHEL 5 (Eric Blake) - build: fix build --without-remote (Eric Blake) Bug fixes: - Fix race in starting transient VMs (Daniel P. Berrange) - Use a port from the migration range for NBD as well (Ján Tomko) - nodedev_hal: fix segfault when virDBusGetSystemBus fails (Ryota Ozaki) - Fix race condition reconnecting to vms & loading configs (Daniel P. Berrange) - Don't update dom->persistent without lock held (Daniel P. Berrange) - storage: fix incorrect typedef (Eric Blake) - apparmor: Fix typo in function name in driver struct initialization (Peter Krempa) - qemu: fix well-formed migration URI formatting (Michael Chapman) - LXC: don't free tty before using it in lxcContainerSetupDevices (Gao feng) - python: Fix Create*WithFiles filefd passing (Marian Neagul) - networkStartDhcpDaemon: Check for dnsmasqCapsRefresh failure (Hongwei Bi) - virsh: Fix job watching when STDIN is not a tty (Peter Krempa) - qemu: fix removal of <interface type='hostdev'> (Laine Stump) - Fix a problem introduced by commit 99889012 (Geoff Hickey) - qemu: Avoid assigning unavailable migration ports (Wang Yufei) - viralloc.h: Fix typo in VIR_APPEND_ELEMENT_COPY_QUIT (Michal Privoznik) - remote: fix regression in event deregistration (Zhou Yimin) - daemon: don't free domain if it's null (Chen Hanxiao) - Remove ATTRIBUTE_NONNULL(3) from qemuMonitorJSONDrivePivot (John Ferlan) - rpc: Correct the wrong payload size checking (Osier Yang) - Fix typo breaking cgroups for NBD backed filesystems (Daniel P. Berrange) - Ignore thin pool LVM devices. (Dusty Mabe) - domain_conf.c: Initialize arrVar and cntVar (Michal Privoznik) - vbox: handle 'saved' state of VMs (Ryota Ozaki) - esx: Fix floppy.fileName handling in the vmx file parser (Geoff Hickey) - Convert uuid to a string before printing it (Ján Tomko) - Initialize threading & error layer in LXC controller (Daniel P. Berrange) - Don't ignore all dbus connection errors (Daniel P. Berrange) - Fix exit status of lxc controller (Daniel P. Berrange) - Fix flaw in detecting log format (Daniel P. Berrange) - qemu_migration: Avoid crashing if domain dies too quickly (Michal Privoznik) - util: fix two virCompareLimitUlong bugs (Bing Bu Cao) - storage_backend: Fix issue with allocation of 0 length volume (John Ferlan) - qemu: Init @pcidevs in qemuPrepareHostdevPCIDevices (Michal Privoznik) - LXC: Fix handling of RAM filesystem size units (Ján Tomko) - Don't clobber 'ret' variable in testCompareXMLToXMLHelper (Daniel P. Berrange) - Adjust legacy max payload size to account for header information (Claudio Bley) - storage: fix file allocation behavior in file cloning (Oskari Saarenmaa) - virfile: safezero: fix buffer allocation max size (Oskari Saarenmaa) - test: Fix coverity warnings (Cole Robinson) - nodedev: Resolve Relax-NG validity error (John Ferlan) - Free cmd in virNetDevVethCreate (Gao feng) - Free cmd in virNetDevVethDelete (Gao feng) - qemu: check actual netdev type rather than config netdev type during init (Laine Stump) - qemuMonitorTestFree: Join worker thread (Michal Privoznik) - Avoid deleting NULL veth device name (Daniel P. Berrange) - qemuMonitorJSONSendKey: Avoid double free (Michal Privoznik) - qemuMonitorJSONGetVirtType: Fix error message (Michal Privoznik) - qemu: cgroup: Fix crash if starting nographics guest (Cole Robinson) - selinux: Only close the selabel_handle once (Ján Tomko) - Fix handling of IPv6 listen addresses in cmdDomDisplay (Ján Tomko) - util: recognize SMB/CIFS filesystems as shared (Laine Stump) - Fix leak of objects when reconnecting to QEMU instances (Daniel P. Berrange) Improvements: - libxl: fix dubious cpumask handling in libxlDomainSetVcpuAffinities (Jeremy Fitzhardinge) - Improve debugging of QEMU start/stop (Daniel P. Berrange) - Improve debugging of job enter/exit code (Daniel P. Berrange) - storage: use correct type for array count (Eric Blake) - maint: avoid further typedef accidents (Eric Blake) - libvirt.c: indent code of virDomainGetMemoryParameters's documentation (Claudio Bley) - libvirt.c: add 2 spaces of indentation to example code of virStreamSend (Claudio Bley) - Add '+' to uid/gid printing for label processing (John Ferlan) - Push RPM deps down into libvirt-daemon-driver-XXXX sub-RPMs (Daniel P. Berrange) - capabilities: add baselabel per sec driver/virt type to secmodel (Giuseppe Scrivano) - security: add new internal function "virSecurityManagerGetBaseLabel" (Giuseppe Scrivano) - security: use a single function to set DAC user and group (Giuseppe Scrivano) - virsh: new environment variable VIRSH_HISTSIZE (Pavel Raiskup) - maint: update to latest gnulib (Eric Blake) - Skip debug message in lxcContainerSetID if no map is set. (Chen Hanxiao) - Avoid Coverity DEADCODE warning (John Ferlan) - virsh: allow alias to expand to opt=value pair (Eric Blake) - Ignore GNU Global tag files (Martin Kletzander) - build: Fix prohibit_int_ijk (and iijjkk) on RHEL 5 (Martin Kletzander) - Get rid of shadowed booleans (Michal Privoznik) - vircgroupmock: Mock access() to some more files (Michal Privoznik) - tests: Use lv_abs_top_builddir instead of bare abs_top_builddir (Michal Privoznik) - qemu: move qemuDomainRemoveNetDevice to avoid forward reference (Laine Stump) - qemu: simplify calling qemuDomainHostdevNetConfigRestore (Laine Stump) - Move virt-login-shell into libvirt-login-shell sub-RPM (Daniel P. Berrange) - Block all use of libvirt.so in setuid programs (Daniel P. Berrange) - Remove (nearly) all use of getuid()/getgid() (Daniel P. Berrange) - Don't allow remote driver daemon autostart when running setuid (Daniel P. Berrange) - Only allow the UNIX transport in remote driver when setuid (Daniel P. Berrange) - Block all use of getenv with syntax-check (Daniel P. Berrange) - Remove all direct use of getenv (Daniel P. Berrange) - Make virCommand env handling robust in setuid env (Daniel P. Berrange) - Set a sane $PATH for virt-login-shell (Daniel P. Berrange) - Add helpers for getting env vars in a setuid environment (Daniel P. Berrange) - qemu: Fix augeas support for migration ports (Michal Privoznik) - qemu: Make migration port range configurable (Jiri Denemark) - netcf: Don't complain when cleanup is called before init (Christophe Fergeau) - virsh: improve usability of '--print-xml' flag for attach-disk command (Chen Hanxiao) - esx: Remove unnecessary NULL comparisons (3/3) (Geoff Hickey) - esx: Remove unnecessary NULL comparisons (2/3) (Geoff Hickey) - esx: Remove unnecessary NULL comparisons (1/3) (Geoff Hickey) - Add support for enabling SASL for SPICE guests (Daniel P. Berrange) - qemuDomainCleanupRemove: s/memmove/VIR_DELETE_ELEMENT_INPLACE/ (Michal Privoznik) - build: use the gnulib version of the .m4 files when present (Giuseppe Scrivano) - storage: allow interleave in pool XML (Eric Blake) - Add some logging to LXC disk/fs nbd/loop setup (Daniel P. Berrange) - Add logging to LXC cgroup devices setup (Daniel P. Berrange) - Add log statement when NBD device is setup (Daniel P. Berrange) - AArch64: Add qemu capabilities schemeta for test. (Pranavkumar Sawargaonkar) - Implement minimal sysinfo for AArch64 platforms. (Pranavkumar Sawargaonkar) - AArch64: Parse cputopology from /proc/cpuinfo. (Pranavkumar Sawargaonkar) - AArch64: CPU Support for AArch64 (ARMv8 64bit). (Pranavkumar Sawargaonkar) - AArch64: Add AArch64 architecture to list of valid arches. (Pranavkumar Sawargaonkar) - cpu: x86: Clean up error messages in x86VendorLoad() (Peter Krempa) - cpu: x86: Use whitespace to clarify context and use consistent labels (Peter Krempa) - cpu: x86: Fix function header formatting and whitespace (Peter Krempa) - cpu: x86: Fix return types of x86cpuidMatch and x86cpuidMatchMasked (Peter Krempa) - cpu: x86: Rename data_iterator and DATA_ITERATOR_INIT (Peter Krempa) - cpu: x86: Rename x86DataAddCpuid as virCPUx86DataAddCPUID (Jiri Denemark) - cpu: x86: Rename x86MakeCPUData as virCPUx86MakeData (Jiri Denemark) - cpu: x86: Rename x86DataFree() as virCPUx86DataFree() (Jiri Denemark) - cpu: x86: Rename struct cpuX86Data as virCPUx86Data (Jiri Denemark) - cpu: x86: Rename struct cpuX86cpuid as virCPUx86CPUID (Jiri Denemark) - cpu: Add support for loading and storing CPU data (Jiri Denemark) - qemu: command: Fix macro indentation (Peter Krempa) - conf: Mark user provided strings in error messages when parsing XML (Peter Krempa) - schema: Rename option 'hypervtristate' to 'featurestate' (Peter Krempa) - fix typo in lxc_driver.c and virsh-nodedev.c (Hongwei Bi) - build: Add lxc testcase to dist list (Daniel Hansel) - cgroup: leave blkio cgroup value checking to kernel (Chen Hanxiao) - cgroup: show error when EINVAL is returned (Chen Hanxiao) - vbox: merge duplicate state conversions (Ryota Ozaki) - build: syntax check to avoid 'const fooPtr' (Eric Blake) - maint: avoid 'const fooPtr' in all remaining places (Eric Blake) - maint: avoid 'const fooPtr' in qemu (Eric Blake) - maint: avoid 'const fooPtr' in security (Eric Blake) - maint: avoid 'const fooPtr' in conf (Eric Blake) - maint: avoid 'const fooPtr' in domain_conf (Eric Blake) - maint: fix awkward typing of virDomainChrGetDomainPtrs (Eric Blake) - maint: avoid 'const fooPtr' in python bindings (Eric Blake) - maint: avoid 'const fooPtr' in tests (Eric Blake) - maint: avoid 'const fooPtr' in nwfilter files (Eric Blake) - maint: avoid 'const fooPtr' in cpu files (Eric Blake) - maint: avoid 'const fooPtr' in virnet files (Eric Blake) - maint: avoid 'const fooPtr' in several util files (Eric Blake) - maint: avoid 'const fooPtr' in hashes (Eric Blake) - maint: avoid 'const fooPtr' in public API (Eric Blake) - Improve log filtering in virLXCProcessReadLogOutputData (Daniel P. Berrange) - Ensure lxcContainerResolveSymlinks reports errors (Daniel P. Berrange) - Ensure lxcContainerMain reports errors on stderr (Daniel P. Berrange) - VMX: Serial devices don't have to be attached (Doug Goldstein) - Revert "VMX: Some serial ports are not actually connected" (Doug Goldstein) - qemu: snapshot: Add support for compressing external snapshot memory (Peter Krempa) - qemu: managedsave: Add support for compressing managed save images (Peter Krempa) - Improve error reporting with LXC controller (Daniel P. Berrange) - Make LXC controller use a private dbus connection & close it (Daniel P. Berrange) - Add a method for closing the dbus system bus connection (Daniel P. Berrange) - Allow use of a private dbus bus connection (Daniel P. Berrange) - VMware: Do version detection earlier (Doug Goldstein) - VMware: Simplify array walk for driver type (Doug Goldstein) - qemu: Include listenAddress in debug prints (Michal Privoznik) - Move virNetDevVPort enum impl into virnetdevvportprofile.c (Daniel P. Berrange) - qemu_conf: Introduce "migration_address" (Michal Privoznik) - qemu: Implement support for VIR_MIGRATE_PARAM_LISTEN_ADDRESS (Michal Privoznik) - virsocket: Introduce virSocketAddrIsWildcard (Michal Privoznik) - Migration: Introduce VIR_MIGRATE_PARAM_LISTEN_ADDRESS (Michal Privoznik) - qemu: Introduce qemuDomainDefCheckABIStability (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONSendKey (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetVirtType (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetCPUInfo (Michal Privoznik) - qemumonitorjsontest: Extend the test for yet another monitor commands (Michal Privoznik) - qemu: Prefer VFIO for PCI device passthrough (Peter Krempa) - qemu: hostdev: Add checks if PCI passthrough is available in the host (Peter Krempa) - qemu: hostdev: Fix function spacing and header formatting (Peter Krempa) - qemu: refactor qemuCompressProgramAvailable() (Peter Krempa) - qemu: Fix coding style in qemuDomainSaveFlags() (Peter Krempa) - storage: Use bool instead of int (Ján Tomko) - tests: Add qemu test for multiple timers (Cole Robinson) - qemu: hostdev: Refactor PCI passhrough handling (Peter Krempa) - virerror: s/VIR_ERR_STORAGE_VOL_EXISTS/VIR_ERR_STORAGE_VOL_EXISTS/ (Michal Privoznik) - fix a ambiguous output of the command:'virsh vol-create-as' (Hongwei Bi) - build: add configure --without-readline (Eric Blake) - build: move readline check into its own macro (Eric Blake) - build: kill maintainer mode, always rebuild by default (Eric Blake) - Remove use of virConnectPtr from all remaining nwfilter code (Daniel P. Berrange) - Don't pass virConnectPtr in nwfilter 'struct domUpdateCBStruct' (Daniel P. Berrange) - Remove virConnectPtr arg from virNWFilterDefParse* (Daniel P. Berrange) - qemu: Use maximum guest memory size when getting NUMA placement advice (Peter Krempa) - virfile: safezero: fall back to writing block by block if mmap fails (Oskari Saarenmaa) - test: snapshot: Add REDEFINE support (Cole Robinson) - qemu: snapshot: Break out redefine preparation to shared function (Cole Robinson) - test: Implement snapshot create/delete/revert APIs (Cole Robinson) - test: Allow specifying domainsnapshot XML (Cole Robinson) - qemu: snapshots: Simplify REDEFINE flag check (Cole Robinson) - qemucapabilitiesdata: Add qemu-1.6.50 data (Michal Privoznik) - qemucapabilitiesdata: Add qemu-1.6.0 data (Michal Privoznik) - qemucapabilitiesdata: Add qemu-1.4.2 data (Michal Privoznik) - qemucapabilitiesdata: Add qemu-1.3.1 data (Michal Privoznik) - qemucapabilitiesdata: Add qemu-1.2.2 data (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONSystemPowerdown (Michal Privoznik) - Use 'vnet' as prefix for veth devices (Daniel P. Berrange) - Retry veth device creation on failure (Daniel P. Berrange) - Avoid reporting an error if veth device is already deleted (Daniel P. Berrange) - Don't set netdev offline in container cleanup (Daniel P. Berrange) - qemumonitorjsontest: Test qemuMonitorJSONGetMigrationCapability (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetTargetArch (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONSetBlockIoThrottle (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetPtyPaths (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetSpiceMigrationStatus (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetMigrationStatus (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetMigrationCacheSize (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetBlockStatsInfo (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetBlockInfo (Michal Privoznik) - qemumonitorjsontest: Test qemuMonitorJSONGetBalloonInfo (Michal Privoznik) - qemu_hotplug: Allow QoS update in qemuDomainChangeNet (Michal Privoznik) - virNetDevBandwidthEqual: Make it more robust (Michal Privoznik) - test: Implement readonly snapshot APIs (Cole Robinson) - test: Wire up managed save APIs (Cole Robinson) - test: Allow specifying object transient state in driver XML (Cole Robinson) - tests: Introduce qemucapabilitiestest (Michal Privoznik) - qemuMonitorTest: Make check for monitor command match optional (Michal Privoznik) - tests: Learn qemuMonitorTestNew optional greeting (Michal Privoznik) - qemu_capabilities: Introduce virQEMUCapsInitQMPMonitor (Michal Privoznik) Cleanups: - xenapi: fix coding style in xenapi_driver.c (Hongwei Bi) - virsh: undocument --shareable (--mode already covers it) (Eric Blake) - Remove test case average timing (Daniel P. Berrange) - Remove existing OOM test impl (Daniel P. Berrange) Thanks everybody for everyone who helped for this release, be it for documentation, bug reports, patches, etc ... Enjoy ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 2

[libvirt] [PATCHv2 0/8] Introduce paravirtual spinlock support
by Peter Krempa 04 Nov '13

04 Nov '13

Version 2 fixes stuff pointed out in Dan's review Jiri Denemark (2): cpu: Export few x86-specific APIs qemu: Add monitor APIs to fetch CPUID data from QEMU Peter Krempa (6): cpu_x86: Refactor storage of CPUID data to add support for KVM features cpu: x86: Parse the CPU feature map only once cpu: x86: Add internal CPUID features support and KVM feature bits conf: Refactor storing and usage of feature flags qemu: Add support for paravirtual spinlocks in the guest qemu: process: Validate specific CPUID flags of a guest docs/formatdomain.html.in | 8 + docs/schemas/domaincommon.rng | 10 +- src/conf/domain_conf.c | 195 +++++++++--- src/conf/domain_conf.h | 3 +- src/cpu/cpu_x86.c | 350 +++++++++++---------- src/cpu/cpu_x86.h | 9 + src/cpu/cpu_x86_data.h | 20 +- src/libvirt_private.syms | 6 + src/libxl/libxl_conf.c | 9 +- src/lxc/lxc_container.c | 6 +- src/qemu/qemu_command.c | 28 +- src/qemu/qemu_monitor.c | 35 +++ src/qemu/qemu_monitor.h | 5 + src/qemu/qemu_monitor_json.c | 145 +++++++++ src/qemu/qemu_monitor_json.h | 2 + src/qemu/qemu_process.c | 53 ++++ src/vbox/vbox_tmpl.c | 45 ++- src/xenapi/xenapi_driver.c | 10 +- src/xenapi/xenapi_utils.c | 22 +- src/xenxs/xen_sxpr.c | 20 +- src/xenxs/xen_xm.c | 30 +- tests/Makefile.am | 1 + .../qemumonitorjson-getcpu-full.data | 5 + .../qemumonitorjson-getcpu-full.json | 46 +++ .../qemumonitorjson-getcpu-host.data | 6 + .../qemumonitorjson-getcpu-host.json | 45 +++ tests/qemumonitorjsontest.c | 76 +++++ .../qemuxml2argv-pv-spinlock-disabled.args | 5 + .../qemuxml2argv-pv-spinlock-disabled.xml | 26 ++ .../qemuxml2argv-pv-spinlock-enabled.args | 5 + .../qemuxml2argv-pv-spinlock-enabled.xml | 26 ++ tests/qemuxml2argvtest.c | 2 + tests/qemuxml2xmltest.c | 2 + 33 files changed, 952 insertions(+), 304 deletions(-) create mode 100644 tests/qemumonitorjsondata/qemumonitorjson-getcpu-full.data create mode 100644 tests/qemumonitorjsondata/qemumonitorjson-getcpu-full.json create mode 100644 tests/qemumonitorjsondata/qemumonitorjson-getcpu-host.data create mode 100644 tests/qemumonitorjsondata/qemumonitorjson-getcpu-host.json create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pv-spinlock-disabled.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pv-spinlock-disabled.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pv-spinlock-enabled.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pv-spinlock-enabled.xml -- 1.8.3.2

2 20

[libvirt] [RFC] net-dhcp-leases: Query: Reg: Leases API Script
by Nehal J Wani 04 Nov '13

04 Nov '13

Q1. The --dhcp-script option will require libvirt to provide a script or executable file to be run. Now as the man page says, this file is executed "Whenever a new DHCP ease is created, or an old one destroyed". Life was easy with the script, as it used the command sed to remove the destroyed lease. eblake had suggested me to use a C program instead. So I wanted to finalize whether to go with C or continue with shell script. Q2. The above executable file will be writing the custom formatted lease parameters to a file "dnsmasq-ip-mac.status" (suggestion open for name). This newly created/updated file will be parsed by the API. We need to decide the format for the file. Do we continue with space separated parameters as before? Q3. What should be the location of the above two files? Is there any example that I can follow in libvirt for deploying custom-script files/C programs which are not to be linked? Script is attached. -- Nehal J Wani

3 8

[libvirt] pvpanic plans?
by Paolo Bonzini 04 Nov '13

04 Nov '13

The thread from yesterday has died off (perhaps also because of my inappropriate answer to Michael, for which I apologize to him and everyone). I took some time to discuss the libvirt requirements further with Daniel Berrange and Eric Blake on IRC. If anyone is interested, I can give logs. This is a suggestion for how to proceed in both QEMU and libvirt. == Builtin pvpanic == QEMU will remove pvpanic from pc-1.5 in 1.6.1 and 1.5.4. This does not break migration. == Support in libvirt for current functionality == libvirt will add a <panic-notifier/> element, and possibly a capability for it accessible via "virsh capabilities". There are two possibilities: 1) On QEMU 1.5.4/1.6.1 and newer (and on QEMU 1.6.0 with a machine type other than pc-1.5), <on_crash> will only work if the element is there. On QEMU 1.5.0->1.5.3, and on QEMU 1.6.0 with the pc-1.5 machine type, <on_crash> will be obeyed always, and may override e.g. reboot-on-panic if a guest driver exist. 2) On all versions, <on_crash> will only work if the element is there. In turn, there are two ways to implement (2): 2a) libvirt will always add -global pvpanic.iobase=0 to neutralize the builtin pvpanic device if present. <panic-notifier/> will create the device with -device pvpanic,iobase=0x505 Advantage: no changes to QEMU Disadvantage 1: writes to port 0 with QEMU 1.{5.0,5.1,5.2,5.3,6.0} and pc-1.5 machine type will write to a pvpanic device instead of the DMA controller. Probably harmless, and limited to some QEMU versions. Disadvantage 2: libvirt has knowledge of the pvpanic port number 2b) QEMU will provide a way for libvirt to detect that no machine type has the builtin pvpanic. If some machine type may have the builtin pvpanic, and <panic-notifier/> is absent, libvirt will add "-global pvpanic.iobase=0" to neutralize it. Otherwise, libvirt will create the device normally. A possible way for libvirt to detect "good" machine types is a dummy property. This is a bit ugly in that the property would not affect the behavior of the device. The property would remain in the long term. Another possibility is for QEMU to rename the device, e.g. to isa-pvpanic. This is also somewhat gross, but not visible in the long term when the "pvpanic" name will be lost in history. Advantage 1: libvirt has no knowledge of the pvpanic port number Disadvantage 1: same as above Disadvantage 2: need a somewhat gross change in QEMU This method also provides an (also somewhat gross on the QEMU side) way to detect other changes in the pvpanic semantics. One example mentioned below, is making the panicked state temporary. == Possible improvements to pvpanic == The current implementation of pvpanic supports three modes: reset system on panic, destroy domain on panic, preserve domain with no possibility to resume it. (Optionally a domain can be dumped too). Long term, the choice to include pvpanic should not be on the guest admin's shoulders, but rather in libosinfo. Thus, it would be nice to have a fourth mode where the panic is logged but the guest otherwise keeps running. This mode would let libosinfo add pvpanic by default without affecting the guest's behavior on panic. With this change, <on_crash>ignore</on_crash> will behave as follows for the three possibilities above: (1) With QEMU 1.5.0 to 1.6.1, <on_crash> will _not_ obey the setting, never (even if no <panic-notifier/> is specified). libvirt will have to pick a fallback action. advantage of destroy as fallback: it is the default (but note that restart is the default for virt-install) advantage of preserve as fallback: lets the admin examine the panic advantage of restart as fallback: maximum availability of the VM, it is the default for virt-install (2a) With QEMU 1.5.0 to 1.6.1, <on_crash> will _not_ obey the setting if <panic-notifier/> is specified. libvirt has _no way_ to learn about this, so the capability would always be present with these QEMU versions and libosinfo would always add <panic-notifier/> with these versions. Given the libosinfo scenario being considered here, this is not very different from (1). (2b) With QEMU 1.5.0 to 1.6.1, the <panic-notifier/> element will not be available and not exposed in libvirt capabilities. Thus with this version libosinfo would omit <panic-notifier/> from the XML. Guest policy will always be followed correctly. The problem in both (1) and (2a) can be summarized as follows. First, libvirt will have to implement and document a fallback action for buggy QEMU. Second, even though the problems would be limited to some version of QEMU, they would be relatively hard to debug for a casual user, could start happening randomly by updating any one of QEMU, libvirt, libosinfo or the guest kernel, and there is no fallback action for libvirt that is always correct. Thus, considering future libosinfo support for pvpanic, (2b) is preferrable in my opinion. Now, making pvpanic reversible requires a change in QEMU (patch already posted). Andreas proposed using a pvpanic property to determine whether the panicked state is temporary or definitive. libvirt could piggyback on such a property to detect the "goodness" of machine types (as mentioned regarding solution 2b above). However: First, this would require a more intrusive patch, less appealing for 1.5 and 1.6 stable branches. Second, there is no reason why libvirt would want to make the panicked state definitive. To achieve the same effect, libvirt can just not issue the "continue" monitor command when the guest is panicked. Thus the new property would be useless except to communicate pvpanic behavior---and renaming the device still seems preferrable to me. Thanks for reading up to here! Paolo

12 54

Re: [libvirt] Libvirt support of mac-programming over macvtap planned?
by Amos Kong 04 Nov '13

04 Nov '13

On Tue, Oct 29, 2013 at 09:50:56AM -0400, Matthew Rosato wrote: > Amos Kong provided QEMU support to facilitate macvtap rx-filter change > notification here: > http://lists.nongnu.org/archive/html/qemu-devel/2013-07/msg02736.html > > Libvirt work was mentioned, but I haven't noticed any activity here > regarding exploitation -- Is someone working this or planning to in the > near future? Don't want to duplicate effort. Anything that I can do to > help? We have an redhat internal bug to track it: https://bugzilla.redhat.com/show_bug.cgi?id=848199 CC Laine > Thanks, > Matt -- Amos.

2 2

[libvirt] [PATCHv2 1/2] virsh: move command cpu-baseline from domain group to host group.
by liyang 04 Nov '13

04 Nov '13

From: Li Yang <liyang.fnst(a)cn.fujitsu.com> cpu-baseline command can compute baseline CPU for a set of given CPUs, I think it should not belong to domain group, should belong to host group, so I moved the related source from virsh-domain.c to virsh-host.c Signed-off-by: Li Yang <liyang.fnst(a)cn.fujitsu.com> --- tools/virsh-domain.c | 116 ------------------------------------------------- tools/virsh-host.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 117 insertions(+), 116 deletions(-) diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c index 42c9920..8fc6c59 100644 --- a/tools/virsh-domain.c +++ b/tools/virsh-domain.c @@ -6107,116 +6107,6 @@ cleanup: } /* - * "cpu-baseline" command - */ -static const vshCmdInfo info_cpu_baseline[] = { - {.name = "help", - .data = N_("compute baseline CPU") - }, - {.name = "desc", - .data = N_("Compute baseline CPU for a set of given CPUs.") - }, - {.name = NULL} -}; - -static const vshCmdOptDef opts_cpu_baseline[] = { - {.name = "file", - .type = VSH_OT_DATA, - .flags = VSH_OFLAG_REQ, - .help = N_("file containing XML CPU descriptions") - }, - {.name = "features", - .type = VSH_OT_BOOL, - .help = N_("Show features that are part of the CPU model type") - }, - {.name = NULL} -}; - -static bool -cmdCPUBaseline(vshControl *ctl, const vshCmd *cmd) -{ - const char *from = NULL; - bool ret = false; - char *buffer; - char *result = NULL; - char **list = NULL; - unsigned int flags = 0; - int count = 0; - - xmlDocPtr xml = NULL; - xmlNodePtr *node_list = NULL; - xmlXPathContextPtr ctxt = NULL; - virBuffer buf = VIR_BUFFER_INITIALIZER; - size_t i; - - if (vshCommandOptBool(cmd, "features")) - flags |= VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES; - - if (vshCommandOptStringReq(ctl, cmd, "file", &from) < 0) - return false; - - if (virFileReadAll(from, VSH_MAX_XML_FILE, &buffer) < 0) - return false; - - /* add a separate container around the xml */ - virBufferStrcat(&buf, "<container>", buffer, "</container>", NULL); - if (virBufferError(&buf)) - goto no_memory; - - VIR_FREE(buffer); - buffer = virBufferContentAndReset(&buf); - - - if (!(xml = virXMLParseStringCtxt(buffer, from, &ctxt))) - goto cleanup; - - if ((count = virXPathNodeSet("//cpu[not(ancestor::cpus)]", - ctxt, &node_list)) == -1) - goto cleanup; - - if (count == 0) { - vshError(ctl, _("No host CPU specified in '%s'"), from); - goto cleanup; - } - - list = vshCalloc(ctl, count, sizeof(const char *)); - - for (i = 0; i < count; i++) { - if (!(list[i] = virXMLNodeToString(xml, node_list[i]))) { - vshSaveLibvirtError(); - goto cleanup; - } - } - - result = virConnectBaselineCPU(ctl->conn, - (const char **)list, count, flags); - - if (result) { - vshPrint(ctl, "%s", result); - ret = true; - } - -cleanup: - xmlXPathFreeContext(ctxt); - xmlFreeDoc(xml); - VIR_FREE(result); - if (list != NULL && count > 0) { - for (i = 0; i < count; i++) - VIR_FREE(list[i]); - } - VIR_FREE(list); - VIR_FREE(buffer); - VIR_FREE(node_list); - - return ret; - -no_memory: - vshError(ctl, "%s", _("Out of memory")); - ret = false; - goto cleanup; -} - -/* * "cpu-stats" command */ static const vshCmdInfo info_cpu_stats[] = { @@ -10517,12 +10407,6 @@ const vshCmdDef domManagementCmds[] = { .flags = 0 }, #endif - {.name = "cpu-baseline", - .handler = cmdCPUBaseline, - .opts = opts_cpu_baseline, - .info = info_cpu_baseline, - .flags = 0 - }, {.name = "cpu-compare", .handler = cmdCPUCompare, .opts = opts_cpu_compare, diff --git a/tools/virsh-host.c b/tools/virsh-host.c index 1d1bb97..b69de7c 100644 --- a/tools/virsh-host.c +++ b/tools/virsh-host.c @@ -35,6 +35,7 @@ #include "virbuffer.h" #include "viralloc.h" #include "virsh-domain.h" +#include "virfile.h" #include "virxml.h" #include "virtypedparam.h" #include "virstring.h" @@ -193,6 +194,116 @@ cleanup: } /* + * "cpu-baseline" command + */ +static const vshCmdInfo info_cpu_baseline[] = { + {.name = "help", + .data = N_("compute baseline CPU") + }, + {.name = "desc", + .data = N_("Compute baseline CPU for a set of given CPUs.") + }, + {.name = NULL} +}; + +static const vshCmdOptDef opts_cpu_baseline[] = { + {.name = "file", + .type = VSH_OT_DATA, + .flags = VSH_OFLAG_REQ, + .help = N_("file containing XML CPU descriptions") + }, + {.name = "features", + .type = VSH_OT_BOOL, + .help = N_("Show features that are part of the CPU model type") + }, + {.name = NULL} +}; + +static bool +cmdCPUBaseline(vshControl *ctl, const vshCmd *cmd) +{ + const char *from = NULL; + bool ret = false; + char *buffer; + char *result = NULL; + char **list = NULL; + unsigned int flags = 0; + int count = 0; + + xmlDocPtr xml = NULL; + xmlNodePtr *node_list = NULL; + xmlXPathContextPtr ctxt = NULL; + virBuffer buf = VIR_BUFFER_INITIALIZER; + size_t i; + + if (vshCommandOptBool(cmd, "features")) + flags |= VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES; + + if (vshCommandOptStringReq(ctl, cmd, "file", &from) < 0) + return false; + + if (virFileReadAll(from, VSH_MAX_XML_FILE, &buffer) < 0) + return false; + + /* add a separate container around the xml */ + virBufferStrcat(&buf, "<container>", buffer, "</container>", NULL); + if (virBufferError(&buf)) + goto no_memory; + + VIR_FREE(buffer); + buffer = virBufferContentAndReset(&buf); + + + if (!(xml = virXMLParseStringCtxt(buffer, from, &ctxt))) + goto cleanup; + + if ((count = virXPathNodeSet("//cpu[not(ancestor::cpus)]", + ctxt, &node_list)) == -1) + goto cleanup; + + if (count == 0) { + vshError(ctl, _("No host CPU specified in '%s'"), from); + goto cleanup; + } + + list = vshCalloc(ctl, count, sizeof(const char *)); + + for (i = 0; i < count; i++) { + if (!(list[i] = virXMLNodeToString(xml, node_list[i]))) { + vshSaveLibvirtError(); + goto cleanup; + } + } + + result = virConnectBaselineCPU(ctl->conn, + (const char **)list, count, flags); + + if (result) { + vshPrint(ctl, "%s", result); + ret = true; + } + +cleanup: + xmlXPathFreeContext(ctxt); + xmlFreeDoc(xml); + VIR_FREE(result); + if (list != NULL && count > 0) { + for (i = 0; i < count; i++) + VIR_FREE(list[i]); + } + VIR_FREE(list); + VIR_FREE(buffer); + VIR_FREE(node_list); + + return ret; + +no_memory: + vshError(ctl, "%s", _("Out of memory")); + ret = false; + goto cleanup; +} + +/* * "maxvcpus" command */ static const vshCmdInfo info_maxvcpus[] = { @@ -955,6 +1066,12 @@ const vshCmdDef hostAndHypervisorCmds[] = { .info = info_hostname, .flags = 0 }, + {.name = "cpu-baseline", + .handler = cmdCPUBaseline, + .opts = opts_cpu_baseline, + .info = info_cpu_baseline, + .flags = 0 + }, {.name = "maxvcpus", .handler = cmdMaxvcpus, .opts = opts_maxvcpus, -- 1.7.1

1 3

[libvirt] [PATCH] virnetsocket: fix getsockopt on FreeBSD
by Ryota Ozaki 04 Nov '13

04 Nov '13

aa0f099 introduced a strict error checking for getsockopt and it revealed that getting a peer credential of a socket on FreeBSD didn't work. Libvirtd hits the error: error : virNetSocketGetUNIXIdentity:1198 : Failed to get valid client socket identity groups SOL_SOCKET (0xffff) was used as a level of getsockopt for LOCAL_PEERCRED, however, it was wrong. 0 is correct as well as Mac OS X. So for LOCAL_PEERCRED our options are SOL_LOCAL (if defined) or 0 on Mac OS X and FreeBSD. According to the fact, the patch simplifies the code by removing ifdef __APPLE__. I tested the patch on FreeBSD 8.4, 9.2 and 10.0-BETA1. Signed-off-by: Ryota Ozaki <ozaki.ryota(a)gmail.com> --- src/rpc/virnetsocket.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/src/rpc/virnetsocket.c b/src/rpc/virnetsocket.c index 3eb5708..04bf25a 100644 --- a/src/rpc/virnetsocket.c +++ b/src/rpc/virnetsocket.c @@ -1152,18 +1152,17 @@ cleanup: /* VIR_SOL_PEERCRED - the value needed to let getsockopt() work with * LOCAL_PEERCRED */ -# ifdef __APPLE__ -# ifdef SOL_LOCAL -# define VIR_SOL_PEERCRED SOL_LOCAL -# else -/* Prior to Mac OS X 10.7, SOL_LOCAL was not defined and users were - * expected to supply 0 as the second value for getsockopt() when using - * LOCAL_PEERCRED - */ -# define VIR_SOL_PEERCRED 0 -# endif + +/* Mac OS X 10.8 provides SOL_LOCAL for LOCAL_PEERCRED */ +# ifdef SOL_LOCAL +# define VIR_SOL_PEERCRED SOL_LOCAL # else -# define VIR_SOL_PEERCRED SOL_SOCKET +/* FreeBSD and Mac OS X prior to 10.7, SOL_LOCAL is not defined and + * users are expected to supply 0 as the second value for getsockopt() + * when using LOCAL_PEERCRED. NB SOL_SOCKET cannot be used instead + * of SOL_LOCAL + */ +# define VIR_SOL_PEERCRED 0 # endif int virNetSocketGetUNIXIdentity(virNetSocketPtr sock, -- 1.8.4

3 4

[libvirt] Entering freeze for libvirt-1.1.4
by Daniel Veillard 04 Nov '13

04 Nov '13

I finally tagged and genrated tarballs for RC1 of 1.1.4, so we have now entered freeze. The bits are available as usual at: ftp://libvirt.org/libvirt/ My initial testing doesn't show anything suspicious but is limited, so please give it a try, especially for portability issues ! If all goes well i will probably make an rc2 by Thurday and release 1.1.4 for good on Monday 4th. Give it a try ! thanks, Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 3