- Devel - libvirt List Archives

[libvirt] [PATCH python 0/4] setup.py: Don't unconditionally run pkg-config
by Cole Robinson 26 Mar '14

26 Mar '14

This series reorganizes setup.py to not unconditionally call pkg-config. This will allow 'setup.py clean' and 'setup.py --help' to work correctly even if pkg-config or libvirt-devel aren't installed. https://bugzilla.redhat.com/show_bug.cgi?id=1074170 Cole Robinson (4): setup.py: Remove unused import setup.py: Move module list building to its own function setup.py: Make have_libvirt_lxc a function setup.py: Allow running --help or clean without pkg-config setup.py | 144 +++++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 85 insertions(+), 59 deletions(-) -- 1.8.5.3

2 6

[libvirt] [PATCH] bhyve: don't fail on busy tap devices
by Roman Bogorodskiy 26 Mar '14

26 Mar '14

We use virBhyveTapGetRealDeviceName() to map network interface name to a real device path, trying to open possible devices and getting names by ioctl. Make it skip devices that fail to open with EBUSY because they're most likely already used by other VMs. --- src/bhyve/bhyve_command.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/bhyve/bhyve_command.c b/src/bhyve/bhyve_command.c index 6d64c27..e569aab 100644 --- a/src/bhyve/bhyve_command.c +++ b/src/bhyve/bhyve_command.c @@ -69,6 +69,8 @@ virBhyveTapGetRealDeviceName(char *name) goto cleanup; } if ((fd = open(devpath, O_RDWR)) < 0) { + if (errno == EBUSY) + continue; virReportSystemError(errno, _("Unable to open '%s'"), devpath); goto cleanup; } -- 1.8.4.2

2 2

[libvirt] [PATCH] libxl: Create log directory earlier
by Stefan Bader 26 Mar '14

26 Mar '14

Commit d9f19c30d054c86b15a304f4118baa4fa75af9d2 moved a lot of the configuration setup into libxlDriverConfigNew(). However that tries to create the libxl/libxl-driver.log before the libxl directory gets created in libxlStateInitialize(). This causes the daemon to fail on systems that have not had the directory created before. Move the code to create the libxl directory into libxlDriverConfigNew(). Signed-off-by: Stefan Bader <stefan.bader(a)canonical.com> --- src/libxl/libxl_conf.c | 8 ++++++++ src/libxl/libxl_driver.c | 7 ------- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c index a6bf1cf..56bb84a 100644 --- a/src/libxl/libxl_conf.c +++ b/src/libxl/libxl_conf.c @@ -1108,6 +1108,14 @@ libxlDriverConfigNew(void) if (virAsprintf(&log_file, "%s/libxl-driver.log", cfg->logDir) < 0) goto error; + if (virFileMakePath(cfg->logDir) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("failed to create log dir '%s': %s"), + cfg->logDir, + virStrerror(errno, ebuf, sizeof(ebuf))); + goto error; + } + if ((cfg->logger_file = fopen(log_file, "a")) == NULL) { VIR_ERROR(_("Failed to create log file '%s': %s"), log_file, virStrerror(errno, ebuf, sizeof(ebuf))); diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c index 0c6672b..e6316a7 100644 --- a/src/libxl/libxl_driver.c +++ b/src/libxl/libxl_driver.c @@ -306,13 +306,6 @@ libxlStateInitialize(bool privileged, goto error; libxl_driver->config = cfg; - if (virFileMakePath(cfg->logDir) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("failed to create log dir '%s': %s"), - cfg->logDir, - virStrerror(errno, ebuf, sizeof(ebuf))); - goto error; - } if (virFileMakePath(cfg->stateDir) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("failed to create state dir '%s': %s"), -- 1.7.9.5

2 1

[libvirt] [PATCHv2] network: fix problems with SRV records
by Laine Stump 26 Mar '14

26 Mar '14

A patch submitted by Steven Malin last week pointed out a problem with libvirt's DNS SRV record configuration: https://www.redhat.com/archives/libvir-list/2014-March/msg00536.html When searching for that message later, I found another series that had been posted by Guannan Ren back in 2012 that somehow slipped between the cracks: https://www.redhat.com/archives/libvir-list/2012-July/msg00236.html That patch was very much out of date, but also pointed out some real problems. This patch fixes all the noted problems by refactoring virNetworkDNSSrvDefParseXML() and networkDnsmasqConfContents(), then verifies those fixes by added several new records to the test case. Problems fixed: * both service and protocol now have an underscore ("_") prepended on the commandline, as required by RFC2782. <srv service='sip' protocol='udp' domain='example.com' target='tests.example.com' port='5060' priority='10' weight='150'/> before: srv-host=sip.udp.example.com,tests.example.com,5060,10,150 after: srv-host=_sip._udp.example.com,tests.example.com,5060,10,150 * if "domain" wasn't specified in the <srv> element, the extra trailing "." will no longer be added to the dnsmasq commandline. <srv service='sip' protocol='udp' target='tests.example.com' port='5060' priority='10' weight='150'/> before: srv-host=sip.udp.,tests.example.com,5060,10,150 after: srv-host=_sip._udp,tests.example.com,5060,10,150 * when optional attributes aren't specified, the separating comma is also now not placed on the dnsmasq commandline. If optional attributes in the middle of the line are not specified, they are replaced with a default value in the commandline (1 for port, 0 for priority and weight). <srv service='sip' protocol='udp' target='tests.example.com' port='5060'/> before: srv-host=sip.udp.,tests.example.com,5060,, after: srv-host=_sip._udp,tests.example.com,5060 (actually the would have generated an error, because "optional" attributes weren't really optional.) * The allowed characters for both service and protocol are now limited to alphanumerics, plus a few special characters that are found in existing names in /etc/services and /etc/protocols. (One exception is that both of these files contain names with an embedded ".", but "." can't be used in these fields of an SRV record because it is used as a field separator and there is no method to escape a "." into a field.) (Previously only the strings "tcp" and "udp" were allowed for protocol, but this restriction has been removed, since RFC2782 specifically says that it isn't limited to those, and that anyway it is case insensitive.) * the "domain" attribute is no longer required in order to recognize the port, priority, and weight attributes during parsing. Only "target" is required for this. * if "target" isn't specified, port, priority, and weight are not allowed (since they are meaningless - an empty target means "this service is *not available* for this domain"). * port, priority, and weight are now truly optional, as the comments originally suggested, but which was not actually true. --- Changes from V1: https://www.redhat.com/archives/libvir-list/2014-March/msg01172.html src/conf/network_conf.c | 129 ++++++++++++++------- src/network/bridge_driver.c | 80 ++++++++----- .../nat-network-dns-srv-record-minimal.conf | 2 +- .../nat-network-dns-srv-record.conf | 8 +- .../nat-network-dns-srv-record.xml | 8 +- 5 files changed, 149 insertions(+), 78 deletions(-) diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index 9be06d3..f1e6243 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -924,6 +924,21 @@ error: return -1; } +/* This includes all characters used in the names of current + * /etc/services and /etc/protocols files (on Fedora 20), except ".", + * which we can't allow because it would conflict with the use of "." + * as a field separator in the SRV record, there appears to be no way + * to escape it in, and the protocols/services that use "." in the + * name are obscure and unlikely to be used anyway. + */ +#define PROTOCOL_CHARS \ + "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789" \ + "-+/" + +#define SERVICE_CHARS \ + "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789" \ + "_-+/*" + static int virNetworkDNSSrvDefParseXML(const char *networkName, xmlNodePtr node, @@ -931,80 +946,108 @@ virNetworkDNSSrvDefParseXML(const char *networkName, virNetworkDNSSrvDefPtr def, bool partialOkay) { + int ret; + xmlNodePtr save_ctxt = ctxt->node; + + ctxt->node = node; + if (!(def->service = virXMLPropString(node, "service")) && !partialOkay) { virReportError(VIR_ERR_XML_DETAIL, _("Missing required service attribute in DNS SRV record " "of network %s"), networkName); goto error; } - if (def->service && strlen(def->service) > DNS_RECORD_LENGTH_SRV) { - virReportError(VIR_ERR_XML_DETAIL, - _("Service name '%s' in network %s is too long, limit is %d bytes"), - def->service, networkName, DNS_RECORD_LENGTH_SRV); - goto error; + if (def->service) { + if (strlen(def->service) > DNS_RECORD_LENGTH_SRV) { + virReportError(VIR_ERR_XML_DETAIL, + _("service attribute '%s' in network %s is too long, " + "limit is %d bytes"), + def->service, networkName, DNS_RECORD_LENGTH_SRV); + goto error; + } + if (strspn(def->service, SERVICE_CHARS) < strlen(def->service)) { + virReportError(VIR_ERR_XML_DETAIL, + _("invalid character in service attribute '%s' " + "in network %s DNS SRV record"), + def->service, networkName); + goto error; + } } if (!(def->protocol = virXMLPropString(node, "protocol")) && !partialOkay) { virReportError(VIR_ERR_XML_DETAIL, _("Missing required protocol attribute " - "in dns srv record '%s' of network %s"), + "in DNS SRV record '%s' of network %s"), def->service, networkName); goto error; } - - /* Check whether protocol value is the supported one */ - if (def->protocol && STRNEQ(def->protocol, "tcp") && - (STRNEQ(def->protocol, "udp"))) { + if (def->protocol && + strspn(def->protocol, PROTOCOL_CHARS) < strlen(def->protocol)) { virReportError(VIR_ERR_XML_DETAIL, - _("Invalid protocol attribute value '%s' " - "in DNS SRV record of network %s"), + _("invalid character in protocol attribute '%s' " + "in network %s DNS SRV record"), def->protocol, networkName); goto error; } /* Following attributes are optional */ - if ((def->target = virXMLPropString(node, "target")) && - (def->domain = virXMLPropString(node, "domain"))) { - xmlNodePtr save_ctxt = ctxt->node; - - ctxt->node = node; - if (virXPathUInt("string(./@port)", ctxt, &def->port) < 0 || - def->port > 65535) { - virReportError(VIR_ERR_XML_DETAIL, - _("Missing or invalid port attribute " - "in network %s"), networkName); - goto error; - } - - if (virXPathUInt("string(./@priority)", ctxt, &def->priority) < 0 || - def->priority > 65535) { - virReportError(VIR_ERR_XML_DETAIL, - _("Missing or invalid priority attribute " - "in network %s"), networkName); - goto error; - } + def->domain = virXMLPropString(node, "domain"); + def->target = virXMLPropString(node, "target"); - if (virXPathUInt("string(./@weight)", ctxt, &def->weight) < 0 || - def->weight > 65535) { - virReportError(VIR_ERR_XML_DETAIL, - _("Missing or invalid weight attribute " - "in network %s"), networkName); - goto error; - } + ret = virXPathUInt("string(./@port)", ctxt, &def->port); + if (ret >= 0 && !def->target) { + virReportError(VIR_ERR_XML_DETAIL, + _("DNS SRV port attribute not permitted without " + "target for service %s in network %s"), + def->service, networkName); + goto error; + } + if (ret == -2 || (ret >= 0 && (def->port < 1 || def->port > 65535))) { + virReportError(VIR_ERR_XML_DETAIL, + _("Invalid DNS SRV port attribute " + "for service %s in network %s"), + def->service, networkName); + goto error; + } - ctxt->node = save_ctxt; + ret = virXPathUInt("string(./@priority)", ctxt, &def->priority); + if (ret >= 0 && !def->target) { + virReportError(VIR_ERR_XML_DETAIL, + _("DNS SRV priority attribute not permitted without " + "target for service %s in network %s"), + def->service, networkName); + goto error; + } + if (ret == -2 || (ret >= 0 && def->priority > 65535)) { + virReportError(VIR_ERR_XML_DETAIL, + _("Invalid DNS SRV priority attribute " + "for service %s in network %s"), + def->service, networkName); + goto error; } - if (!(def->service || def->protocol)) { + ret = virXPathUInt("string(./@weight)", ctxt, &def->weight); + if (ret >= 0 && !def->target) { virReportError(VIR_ERR_XML_DETAIL, - _("Missing required service attribute or protocol " - "in DNS SRV record of network %s"), networkName); + _("DNS SRV weight attribute not permitted without " + "target for service %s in network %s"), + def->service, networkName); + goto error; + } + if (ret == -2 || (ret >= 0 && def->weight > 65535)) { + virReportError(VIR_ERR_XML_DETAIL, + _("Invalid DNS SRV weight attribute " + "for service %s in network %s"), + def->service, networkName); goto error; } + + ctxt->node = save_ctxt; return 0; error: virNetworkDNSSrvDefClear(def); + ctxt->node = save_ctxt; return -1; } diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index 59b6c09..e256dba 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -736,10 +736,6 @@ networkDnsmasqConfContents(virNetworkObjPtr network, int r, ret = -1; int nbleases = 0; size_t i; - char *record = NULL; - char *recordPort = NULL; - char *recordWeight = NULL; - char *recordPriority = NULL; virNetworkDNSDefPtr dns = &network->def->dns; virNetworkIpDefPtr tmpipdef, ipdef, ipv4def, ipv6def; bool ipv6SLAAC; @@ -880,33 +876,57 @@ networkDnsmasqConfContents(virNetworkObjPtr network, } for (i = 0; i < dns->nsrvs; i++) { - if (dns->srvs[i].service && dns->srvs[i].protocol) { - if (dns->srvs[i].port && - virAsprintf(&recordPort, "%d", dns->srvs[i].port) < 0) - goto cleanup; - if (dns->srvs[i].priority && - virAsprintf(&recordPriority, "%d", dns->srvs[i].priority) < 0) - goto cleanup; - if (dns->srvs[i].weight && - virAsprintf(&recordWeight, "%d", dns->srvs[i].weight) < 0) - goto cleanup; + /* service/protocol are required, and should have been validated + * by the parser. + */ + if (!dns->srvs[i].service) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Missing required 'service' " + "attribute in SRV record of network '%s'"), + network->def->name); + goto cleanup; + } + if (!dns->srvs[i].protocol) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Missing required 'service' " + "attribute in SRV record of network '%s'"), + network->def->name); + goto cleanup; + } + /* RFC2782 requires that service and protocol be preceded by + * an underscore. + */ + virBufferAsprintf(&configbuf, "srv-host=_%s._%s", + dns->srvs[i].service, dns->srvs[i].protocol); - if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", - dns->srvs[i].service, - dns->srvs[i].protocol, - dns->srvs[i].domain ? dns->srvs[i].domain : "", - dns->srvs[i].target ? dns->srvs[i].target : "", - recordPort ? recordPort : "", - recordPriority ? recordPriority : "", - recordWeight ? recordWeight : "") < 0) - goto cleanup; + /* domain is optional - it defaults to the domain of this network */ + if (dns->srvs[i].domain) + virBufferAsprintf(&configbuf, ".%s", dns->srvs[i].domain); - virBufferAsprintf(&configbuf, "srv-host=%s\n", record); - VIR_FREE(record); - VIR_FREE(recordPort); - VIR_FREE(recordWeight); - VIR_FREE(recordPriority); + /* If target is empty or ".", that means "the service is + * decidedly not available at this domain" (RFC2782). In that + * case, any port, priority, or weight is irrelevant. + */ + if (dns->srvs[i].target && STRNEQ(dns->srvs[i].target, ".")) { + + virBufferAsprintf(&configbuf, ",%s", dns->srvs[i].target); + /* port, priority, and weight are optional, but are + * identified by their position in the line. If an item is + * unspecified, but something later in the line *is* + * specified, we need to give the default value for the + * unspecified item. (According to the dnsmasq manpage, + * the default for port is 1). + */ + if (dns->srvs[i].port || + dns->srvs[i].priority || dns->srvs[i].weight) + virBufferAsprintf(&configbuf, ",%d", + dns->srvs[i].port ? dns->srvs[i].port : 1); + if (dns->srvs[i].priority || dns->srvs[i].weight) + virBufferAsprintf(&configbuf, ",%d", dns->srvs[i].priority); + if (dns->srvs[i].weight) + virBufferAsprintf(&configbuf, ",%d", dns->srvs[i].weight); } + virBufferAddLit(&configbuf, "\n"); } /* Find the first dhcp for both IPv4 and IPv6 */ @@ -1082,10 +1102,6 @@ networkDnsmasqConfContents(virNetworkObjPtr network, cleanup: virBufferFreeAndReset(&configbuf); - VIR_FREE(record); - VIR_FREE(recordPort); - VIR_FREE(recordWeight); - VIR_FREE(recordPriority); return ret; } diff --git a/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf b/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf index ce4dd6f..e60411b 100644 --- a/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf +++ b/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf @@ -12,7 +12,7 @@ listen-address=192.168.123.1 listen-address=fc00:db8:ac10:fe01::1 listen-address=fc00:db8:ac10:fd01::1 listen-address=10.24.10.1 -srv-host=name.tcp.,,,, +srv-host=_name._tcp dhcp-range=192.168.122.2,192.168.122.254 dhcp-no-override dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases diff --git a/tests/networkxml2confdata/nat-network-dns-srv-record.conf b/tests/networkxml2confdata/nat-network-dns-srv-record.conf index b47cbe7..16e7dca 100644 --- a/tests/networkxml2confdata/nat-network-dns-srv-record.conf +++ b/tests/networkxml2confdata/nat-network-dns-srv-record.conf @@ -8,7 +8,13 @@ strict-order except-interface=lo bind-dynamic interface=virbr0 -srv-host=name.tcp.test-domain-name,.,1024,10,10 +srv-host=_name._tcp.test-domain-name.com,test.example.com,1111,11,111 +srv-host=_name2._udp,test2.example.com,2222,22,222 +srv-host=_name3._tcp.test3.com,test3.example.com,3333,33 +srv-host=_name4._tcp.test4.com,test4.example.com,4444 +srv-host=_name5._udp,test5.example.com,1,55,555 +srv-host=_name6._tcp.test6.com,test6.example.com,6666,0,666 +srv-host=_name7._tcp.test7.com,test7.example.com,1,0,777 dhcp-range=192.168.122.2,192.168.122.254 dhcp-no-override dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases diff --git a/tests/networkxml2confdata/nat-network-dns-srv-record.xml b/tests/networkxml2confdata/nat-network-dns-srv-record.xml index 3dd19e6..d01b331 100644 --- a/tests/networkxml2confdata/nat-network-dns-srv-record.xml +++ b/tests/networkxml2confdata/nat-network-dns-srv-record.xml @@ -6,7 +6,13 @@ </forward> <bridge name='virbr0' stp='on' delay='0'/> <dns> - <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10'/> + <srv service='name' protocol='tcp' domain='test-domain-name.com' target='test.example.com' port='1111' priority='11' weight='111'/> + <srv service='name2' protocol='udp' target='test2.example.com' port='2222' priority='22' weight='222'/> + <srv service='name3' protocol='tcp' domain='test3.com' target='test3.example.com' port='3333' priority='33'/> + <srv service='name4' protocol='tcp' domain='test4.com' target='test4.example.com' port='4444'/> + <srv service='name5' protocol='udp' target='test5.example.com' priority='55' weight='555'/> + <srv service='name6' protocol='tcp' domain='test6.com' target='test6.example.com' port='6666' weight='666'/> + <srv service='name7' protocol='tcp' domain='test7.com' target='test7.example.com' weight='777'/> </dns> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> -- 1.8.5.3

2 1

[libvirt] [PATCH 00/24] Indent top-level labels by one space
by Ján Tomko 26 Mar '14

26 Mar '14

3 28

[libvirt] [python PATCHv2 0/2] arbitrary qemu events
by Eric Blake 26 Mar '14

26 Mar '14

Changes since v1: rebase to latest code base, address review comments regarding a leak of dom, add prereq patch to fix bugs that I had been copying and pasting Eric Blake (2): event: fix domain reference bugs qemu: support arbitrary monitor events generator.py | 20 +-- libvirt-override.c | 319 +++++++++++++++++++++++++++++------------------ libvirt-qemu-override.c | 223 ++++++++++++++++++++++++++++++++- libvirt-qemu-override.py | 35 ++++++ 4 files changed, 469 insertions(+), 128 deletions(-) create mode 100644 libvirt-qemu-override.py -- 1.8.5.3

2 4

[libvirt] [libvirt-python PATCH] generator: Add virConnectDomainQemuMonitorEventCallback to skipped_types
by Martin Kletzander 25 Mar '14

25 Mar '14

Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- Notes: pushed as a build-breaker generator.py | 1 + 1 file changed, 1 insertion(+) diff --git a/generator.py b/generator.py index 0e9600f..e409921 100755 --- a/generator.py +++ b/generator.py @@ -273,6 +273,7 @@ skipped_types = { 'virConnectDomainEventWatchdogCallback': "No function types in python", 'virConnectDomainEventIOErrorCallback': "No function types in python", 'virConnectDomainEventGraphicsCallback': "No function types in python", + 'virConnectDomainQemuMonitorEventCallback': "No function types in python", 'virStreamEventCallback': "No function types in python", 'virEventHandleCallback': "No function types in python", 'virEventTimeoutCallback': "No function types in python", -- 1.9.1

1 0

[libvirt] [PATCH 0/2] sanlock: Forbid unsupported lock failure actions
by Jiri Denemark 25 Mar '14

25 Mar '14

Some lock failure actions do not make any sense in combination with sanlock driver. Let's just report an error if someone tries to use them instead of causing unexpected and possibly quite bad thing to happen. Jiri Denemark (2): sanlock: Forbid VIR_DOMAIN_LOCK_FAILURE_IGNORE sanlock: Forbid VIR_DOMAIN_LOCK_FAILURE_RESTART src/locking/lock_driver_sanlock.c | 12 +++++++++++- src/locking/sanlock_helper.c | 28 +++------------------------- 2 files changed, 14 insertions(+), 26 deletions(-) -- 1.9.1

2 4

[libvirt] [PATCH 0/4] bhyve integration: pie, blk, MAC, host API
by Wojciech Macek 25 Mar '14

25 Mar '14

Hi, I'm working on enabling OpenStack/libvirt support for FreeBSD hosts. Please look into some patches I'd like to submit for rewiev. 1. PIE-flag: on some FreeBSD-10 the clang toolchain is broken and cannot build executables with PIE option, so I added the flag to let the user choose. 2. bhyve MAC: add MAC address configuration for bhyve virtio network adapter 3. bhyve blk: add support for up to 8 blk devices, atapi/sata/virtio bus with file/block backend 4. bhyve host API: initial support for "host" functions on FreeBSD Regards, Wojtek Wojciech Macek (4): pie: add Position-Independent-Executable flag bhyve: MAC address configuration bhyve: multiple virtio-blk devices support bhyve: host API support configure.ac | 14 +++++++- src/bhyve/bhyve_command.c | 92 ++++++++++++++++++++++++++++++----------------- src/bhyve/bhyve_command.h | 8 +++++ src/bhyve/bhyve_driver.c | 66 ++++++++++++++++++++++++++++++++++ src/nodeinfo.c | 19 ++++++++++ 5 files changed, 165 insertions(+), 34 deletions(-) -- 1.9.0

4 13

[libvirt] [PATCHv2] gluster: Fix "key" attribute for gluster volumes
by Peter Krempa 25 Mar '14

25 Mar '14

According to our documentation the "key" value has the following meaning: "Providing an identifier for the volume which identifies a single volume." The currently used keys for gluster volumes consist of the gluster volume name and file path. This can't be considered unique as a different storage server can serve a volume with the same name. Unfortunately I wasn't able to figure out a way to retrieve the gluster volume UUID which would avoid the possibility of having two distinct keys identifying a single volume. Use the full URI as the key for the volume to avoid the more critical ambiguity problem and document the possible change to UUID. --- docs/storage.html.in | 6 ++++-- src/storage/storage_backend_gluster.c | 10 ++++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/docs/storage.html.in b/docs/storage.html.in index 2706bc5..f75996a 100644 --- a/docs/storage.html.in +++ b/docs/storage.html.in @@ -711,8 +711,10 @@ correspond to the files that can be found when mounting the gluster volume. The <code>name</code> is the path relative to the effective mount specified for the pool; and - the <code>key</code> is a path including the gluster volume - name and any subdirectory specified by the pool.</p> + the <code>key</code> is a string that identifies a single volume + uniquely. Currently the <code>key</code> attribute consists of the + URI of the volume but it may be changed to an UUID of the volume + in the future.</p> <pre> <volume> <name>myfile</name> diff --git a/src/storage/storage_backend_gluster.c b/src/storage/storage_backend_gluster.c index a22b23a..06292fa 100644 --- a/src/storage/storage_backend_gluster.c +++ b/src/storage/storage_backend_gluster.c @@ -187,6 +187,7 @@ virStorageBackendGlusterSetMetadata(virStorageBackendGlusterStatePtr state, const char *name) { int ret = -1; + char *path = NULL; char *tmp; VIR_FREE(vol->key); @@ -201,12 +202,12 @@ virStorageBackendGlusterSetMetadata(virStorageBackendGlusterStatePtr state, goto cleanup; } - if (virAsprintf(&vol->key, "%s%s%s", state->volname, state->dir, + if (virAsprintf(&path, "%s%s%s", state->volname, state->dir, vol->name) < 0) goto cleanup; tmp = state->uri->path; - if (virAsprintf(&state->uri->path, "/%s", vol->key) < 0) { + if (virAsprintf(&state->uri->path, "/%s", path) < 0) { state->uri->path = tmp; goto cleanup; } @@ -218,9 +219,14 @@ virStorageBackendGlusterSetMetadata(virStorageBackendGlusterStatePtr state, VIR_FREE(state->uri->path); state->uri->path = tmp; + /* the path is unique enough to serve as a volume key */ + if (VIR_STRDUP(vol->key, vol->target.path) < 0) + goto cleanup; + ret = 0; cleanup: + VIR_FREE(path); return ret; } -- 1.9.0

1 1