- Devel - libvirt List Archives

[libvirt] [RFC v2] external (pull) backup API
by Nikolay Shirokovskiy 25 Apr '18

25 Apr '18

Hi, all. This is another RFC on pull backup API. This API provides means to read domain disks in a snapshotted state so that client can back them up as well as means to write domain disks to revert them to backed up state. The previous version of RFC is [1]. I'll also describe the API implementation details to shed light on misc qemu dirty bitmap commands usage. This API does not use existent disks snapshots. Instead it introduces snapshots provided by qemu's blockdev-backup command. The reason is we need snapshotted disk state only temporarily for duration of backup operation and newly introduced snapshots can be easily discarded at the end of operation without block commit operation. Technically difference is next. On usual snapshot we create new image backed by original and all new data goes to the new image thus original image stays in a snapshotted state. In temporary snapshots we create new image backed by original and all new data still goes to the original image but before new data is written old data to be overwritten is popped out to the new image thus we get snapshotted state thru new image. Disks snapshots as well as disks itself are avaiable to read/write thru qemu NBD server. Here is typical actions on domain backup: - create temporary snapshot of domain disks of interest - export snaphots thru NBD - back them up - remove disks from export - delete temporary snapshot and typical actions on domain restore: - start domain in paused state - export domain disks of interest thru NBD for write - restore them - remove disks from export - resume or destroy domain Now let's write down API in more details. There are minor changes in comparison with previous version [1]. *Temporary snapshot API* In previous version it is called 'Fleece API' after qemu terms and I'll still use BlockSnapshot prefix for commands as in previous RFC instead of TmpSnapshots which I inclined more now. virDomainBlockSnapshotPtr virDomainBlockSnapshotCreateXML(virDomainPtr domain, const char *xmlDesc, unsigned int flags); virDomainBlockSnapshotDelete(virDomainBlockSnapshotPtr snapshot, unsigned int flags); virDomainBlockSnapshotList(virDomainPtr domain, virDomainBlockSnapshotPtr **snaps, unsigned int flags); virDomainBlockSnapshotGetXMLDesc(virDomainBlockSnapshotPtr snapshot, unsigned int flags); virDomainBlockSnapshotPtr virDomainBlockSnapshotLookupByName(virDomainPtr domain, const char *name, unsigned int flags); Here is an example of snapshot xml description: <domainblocksnapshot> <name>d068765e-8b50-4d74-9b72-1e55c663cbf8</name> <disk name='sda' type="file"> <fleece file="/tmp/snapshot-a.hdd"/> </disk> <disk name='sdb' type="file"> <fleece file="/tmp/snapshot-b.hdd"/> </disk> </domainblocksnapshot> Temporary snapshots are indepentent thus they are not organized in tree structure as usual snapshots, so the 'list snapshots' and 'lookup' function will suffice. Qemu can track what disk's blocks are changed from snapshotted state so on next backup client can backup only changed blocks. virDomainBlockSnapshotCreateXML accepts VIR_DOMAIN_BLOCK_SNAPSHOT_CREATE_CHECKPOINT flag to turn this option for snapshot which means to track changes from this particular snapshot. I used checkpoint term and not [dirty] bitmap because many qemu dirty bitmaps are used to provide changed blocks from the given checkpoint to current snapshot in current implementation (see *Implemenation* section for more details). Also bitmap keeps block changes and thus itself changes in time and checkpoint is a more statical terms means you can query changes from that moment in time. Checkpoints are visible in active domain xml: <disk type='file' device='disk'> .. <target dev='sda' bus='scsi'/> <alias name='scsi0-0-0-0'/> <checkpoint name="93a5c045-6457-2c09-e56c-927cdf34e178"> <checkpoint name="5768a388-c1c4-414c-ac4e-eab216ba7c0c"> .. </disk> Every checkpoint requires qemu dirty bitmap which eats 16MiB of RAM with default dirty block size of 64KiB for 1TiB disk and the same amount of disk space is used. So client need to manage checkpoints and delete unused. Thus next API function: int virDomainBlockCheckpointRemove(virDomainPtr domain, const char *name, unsigned int flags); *Block export API* I guess it is natural to treat qemu NBD server as a domain device. So we can use virDomainAttachDeviceFlags/virDomainDetachDeviceFlags API to start/stop NBD server and virDomainUpdateDeviceFlags to add/delete disks to be exported. While I'm have no doubts about start/stop operations using virDomainUpdateDeviceFlags looks a bit inconvinient so I decided to add a pair of API functions just to add/delete disks to be exported: int virDomainBlockExportStart(virDomainPtr domain, const char *xmlDesc, unsigned int flags); int virDomainBlockExportStop(virDomainPtr domain, const char *xmlDesc, unsigned int flags); I guess more appropriate names are virDomainBlockExportAdd and virDomainBlockExportRemove but as I already have a patch series implementing pull backups with these names I would like to keep these names now. These names also reflect that in the implementation I decided to start/stop NBD server in a lazy manner. While it is a bit innovative for libvirt API I guess it is convinient because to refer NBD server to add/remove disks to we need to identify it thru it's parameters like type, address etc until we introduce some device id (which does not looks consistent with current libvirt design). So it looks like we have all parameters to start/stop server in the frame of these calls so why have extra API calls just to start/stop server manually. If we later need to have NBD server without disks we can perfectly support virDomainAttachDeviceFlags/virDomainDetachDeviceFlags. Here is example of xml to add/remove disks (specifying checkpoint attribute is not needed for removing disks of course): <domainblockexport type="nbd"> <address type="ip" host="0.0.0.0" port="8000"/> <disk name="sda" snapshot="0044757e-1a2d-4c2c-b92f-bb403309bb17" checkpoint="d068765e-8b50-4d74-9b72-1e55c663cbf8"/> <disk name="sdb" snapshot="0044757e-1a2d-4c2c-b92f-bb403309bb17" checkpoint="d068765e-8b50-4d74-9b72-1e55c663cbf8"/> </domainblockexport> And this is how this NBD server will be exposed in domain xml: <devices> ... <blockexport type="nbd"> <address type="ip" host="0.0.0.0" port="8000"/> <disk name="sda" snapshot="0044757e-1a2d-4c2c-b92f-bb403309bb17" checkpoint="d068765e-8b50-4d74-9b72-1e55c663cbf8" exportname="sda-0044757e-1a2d-4c2c-b92f-bb403309bb17"/> <disk name="sdb" snapshot="0044757e-1a2d-4c2c-b92f-bb403309bb17" checkpoint="d068765e-8b50-4d74-9b72-1e55c663cbf8 exportname="sdb-0044757e-1a2d-4c2c-b92f-bb403309bb17"/> </blockexport> ... </devices> *Implementation details from qemu-libvirt interactions POV* 1. Temporary snapshot - create snapshot - add fleece blockdev backed by disk of interest - start fleece blockjob which will pop out data to be overwritten to fleece blockdev { "execute": "blockdev-add" "arguments": { "backing": "drive-scsi0-0-0-0", "driver": "qcow2", "file": { "driver": "file", "filename": "/tmp/snapshot-a.hdd" }, "node-name": "snapshot-scsi0-0-0-0" }, } { "execute": "transaction" "arguments": { "actions": [ { "type": "blockdev-backup" "data": { "device": "drive-scsi0-0-0-0", "target": "snapshot-scsi0-0-0-0" "sync": "none", }, } ] }, } - delete snapshot - cancel fleece blockjob - delete fleece blockdev { "execute": "block-job-cancel" "arguments": { "device": "drive-scsi0-0-0-0" }, } { "execute": "blockdev-del" "arguments": { "node-name": "snapshot-scsi0-0-0-0" }, } 2. Block export - add disks to export - start NBD server if it is not started - add disks { "execute": "nbd-server-start" "arguments": { "addr": { "type": "inet" "data": { "host": "0.0.0.0", "port": "49300" }, } }, } { "execute": "nbd-server-add" "arguments": { "device": "snapshot-scsi0-0-0-0", "name": "sda-d068765e-8b50-4d74-9b72-1e55c663cbf8", "writable": false }, } - remove disks from export - remove disks - stop NBD server if there are no disks left { "arguments": { "mode": "hard", "name": "sda-d068765e-8b50-4d74-9b72-1e55c663cbf8" }, "execute": "nbd-server-remove" } { "execute": "nbd-server-stop" } 3. Checkpoints (the most interesting part) First a few facts about qemu dirty bitmaps. Bitmap can be either in active or disable state. In disabled state it does not get changed on guest writes. And oppositely in active state it tracks guest writes. This implementation uses approach with only one active bitmap at a time. This should reduce guest write penalties in the presence of checkpoints. So on first snapshot we create bitmap B_1. Now it tracks changes from the snapshot 1. On second snapshot we create bitmap B_2 and disable bitmap B1 and so on. Now bitmap B1 keep changes from snaphost 1 to snapshot 2, B2 - changes from snaphot 2 to snapshot 3 and so on. Last bitmap is active and gets most disk change after latest snapshot. Getting changed blocks bitmap from some checkpoint in past till current snapshot is quite simple in this scheme. For example if the last snapshot is 7 then to get changes from snapshot 3 to latest snapshot we need to merge bitmaps B3, B4, B4 and B6. Merge is just logical OR on bitmap bits. Deleting a checkpoint somewhere in the middle of checkpoint sequence requires merging correspondent bitmap to the previous bitmap in this scheme. We use persitent bitmaps in the implementation. This means upon qemu process termination bitmaps are saved in disks images metadata and restored back on qemu process start. This makes checkpoint a persistent property that is we keep them across domain start/stops. Qemu does not try hard to keep bitmaps. If upon save something goes wrong bitmap is dropped. The same is applied to the migration process too. For backup process it is not critical. If we don't discover a checkpoint we always can make a full backup. Also qemu provides no special means to track order of bitmaps. These facts are critical for implementation with one active bitmap at a time. We need right order of bitmaps upon merge - for snapshot N and block changes from snanpshot K, K < N to N we need to merge bitmaps B_{K}, ..., B_{N-1}. Also if one of the bitmaps to be merged is missing we can't calculate desired block changes too. So the implementation encode bitmap order in their names. For snapshot A1, bitmap name will be A1, for snapshot A2 bitmap name will be A2^A1 and so on. Using this naming encoding upon domain start we can find out bitmap order and check for missing ones. This complicates a bit bitmap removing though. For example removing a bitmap somewhere in the middle looks like this: - removing bitmap K (bitmap name is NAME_{K}^NAME_{K-1} - create new bitmap named NAME_{K+1}^NAME_{K-1} ---. - disable new bitmap | This is effectively renaming - merge bitmap NAME_{K+1}^NAME_{K} to the new bitmap | of bitmap K+1 to comply the naming scheme - remove bitmap NAME_{K+1}^NAME_{K} ___/ - merge bitmap NAME_{K}^NAME_{K-1} to NAME_{K-1}^NAME_{K-2} - remove bitmap NAME_{K}^NAME_{K-1} As you can see we need to change name for bitmap K+1 to keep our bitmap naming scheme. This is done creating new K+1 bitmap with appropriate name and copying old K+1 bitmap into new. So while it is possible to have only one active bitmap at a time it costs some exersices at managment layer. To me it looks like qemu itself is a better place to track bitmaps chain order and consistency. Now how exporting bitmaps looks like. - add to export disk snapshot N with changes from checkpoint K - add fleece blockdev to NBD exports - create new bitmap T - disable bitmap T - merge bitmaps K, K+1, .. N-1 into T - add bitmap to T to nbd export - remove disk snapshot from export - remove fleece blockdev from NBD exports - remove bitmap T Here is qemu commands examples for operation with checkpoints, I'll make several snapshots with checkpoints for purpuse of better illustration. - create snapshot d068765e-8b50-4d74-9b72-1e55c663cbf8 with checkpoint - same as without checkpoint but additionally add bitmap on fleece blockjob start ... { "execute": "transaction" "arguments": { "actions": [ { "type": "blockdev-backup" "data": { "device": "drive-scsi0-0-0-0", "sync": "none", "target": "snapshot-scsi0-0-0-0" }, }, { "type": "block-dirty-bitmap-add" "data": { "name": "libvirt-d068765e-8b50-4d74-9b72-1e55c663cbf8", "node": "drive-scsi0-0-0-0", "persistent": true }, } ] }, } - delete snapshot d068765e-8b50-4d74-9b72-1e55c663cbf8 - same as without checkpoints - create snapshot 0044757e-1a2d-4c2c-b92f-bb403309bb17 with checkpoint - same actions as for the first snapshot, but additionally disable the first bitmap ... { "execute": "transaction" "arguments": { "actions": [ { "type": "blockdev-backup" "data": { "device": "drive-scsi0-0-0-0", "sync": "none", "target": "snapshot-scsi0-0-0-0" }, }, { "type": "x-vz-block-dirty-bitmap-disable" "data": { "name": "libvirt-d068765e-8b50-4d74-9b72-1e55c663cbf8", "node": "drive-scsi0-0-0-0" }, }, { "type": "block-dirty-bitmap-add" "data": { "name": "libvirt-0044757e-1a2d-4c2c-b92f-bb403309bb17^d068765e-8b50-4d74-9b72-1e55c663cbf8", "node": "drive-scsi0-0-0-0", "persistent": true }, } ] }, } - delete snapshot 0044757e-1a2d-4c2c-b92f-bb403309bb17 - create snapshot 8fc02db3-166f-4de7-b7aa-1f7303e6162b with checkpoint - add disk snapshot 8fc02db3-166f-4de7-b7aa-1f7303e6162b to export and bitmap with changes from checkpoint d068765e-8b50-4d74-9b72-1e55c663cbf8 - same as add export without checkpoint, but aditionally - form result bitmap - add bitmap to NBD export ... { "execute": "transaction" "arguments": { "actions": [ { "type": "block-dirty-bitmap-add" "data": { "node": "drive-scsi0-0-0-0", "name": "libvirt-__export_temporary__", "persistent": false }, }, { "type": "x-vz-block-dirty-bitmap-disable" "data": { "node": "drive-scsi0-0-0-0" "name": "libvirt-__export_temporary__", }, }, { "type": "x-vz-block-dirty-bitmap-merge" "data": { "node": "drive-scsi0-0-0-0", "src_name": "libvirt-d068765e-8b50-4d74-9b72-1e55c663cbf8" "dst_name": "libvirt-__export_temporary__", }, }, { "type": "x-vz-block-dirty-bitmap-merge" "data": { "node": "drive-scsi0-0-0-0", "src_name": "libvirt-0044757e-1a2d-4c2c-b92f-bb403309bb17^d068765e-8b50-4d74-9b72-1e55c663cbf# "dst_name": "libvirt-__export_temporary__", }, } ] }, } { "execute": "x-vz-nbd-server-add-bitmap" "arguments": { "name": "sda-8fc02db3-166f-4de7-b7aa-1f7303e6162b" "bitmap": "libvirt-__export_temporary__", "bitmap-export-name": "d068765e-8b50-4d74-9b72-1e55c663cbf8", }, } - remove snapshot 8fc02db3-166f-4de7-b7aa-1f7303e6162b from export - same as without checkpoint but additionally remove temporary bitmap ... { "arguments": { "name": "libvirt-__export_temporary__", "node": "drive-scsi0-0-0-0" }, "execute": "block-dirty-bitmap-remove" } - delete checkpoint 0044757e-1a2d-4c2c-b92f-bb403309bb17 (similar operation is described in the section about naming scheme for bitmaps, with difference that K+1 is N here and thus new bitmap should not be disabled) { "arguments": { "actions": [ { "type": "block-dirty-bitmap-add" "data": { "node": "drive-scsi0-0-0-0", "name": "libvirt-8fc02db3-166f-4de7-b7aa-1f7303e6162b^d068765e-8b50-4d74-9b72-1e55c663cbf8", "persistent": true }, }, { "type": "x-vz-block-dirty-bitmap-merge" "data": { "node": "drive-scsi0-0-0-0", "src_name": "libvirt-0044757e-1a2d-4c2c-b92f-bb403309bb17^d068765e-8b50-4d74-9b72-1e55c663cbf# "dst_name": "libvirt-d068765e-8b50-4d74-9b72-1e55c663cbf8", }, }, { "type": "x-vz-block-dirty-bitmap-merge" "data": { "node": "drive-scsi0-0-0-0", "src_name": "libvirt-8fc02db3-166f-4de7-b7aa-1f7303e6162b^0044757e-1a2d-4c2c-b92f-bb403309bb1# "dst_name": "libvirt-8fc02db3-166f-4de7-b7aa-1f7303e6162b^d068765e-8b50-4d74-9b72-1e55c663cbf# }, }, ] }, "execute": "transaction" } { "execute": "x-vz-block-dirty-bitmap-remove" "arguments": { "node": "drive-scsi0-0-0-0" "name": "libvirt-8fc02db3-166f-4de7-b7aa-1f7303e6162b^0044757e-1a2d-4c2c-b92f-bb403309bb17", }, }, { "execute": "x-vz-block-dirty-bitmap-remove" "arguments": { "node": "drive-scsi0-0-0-0" "name": "libvirt-0044757e-1a2d-4c2c-b92f-bb403309bb17^d068765e-8b50-4d74-9b72-1e55c663cbf8", }, } Here is a list of bitmap commands used in implementation but not yet in upstream (AFAIK). x-vz-block-dirty-bitmap-remove x-vz-block-dirty-bitmap-merge x-vz-block-dirty-bitmap-disable x-vz-block-dirty-bitmap-enable (not in the examples; used when removing most recent checkpoint) x-vz-nbd-server-add-bitmap *Restore operation nuances* As it was written above to restore a domain one needs to start it in paused state, export domain's disks and write them from backup. However qemu currently does not let export disks for write even for a domain that never starts guests CPU. We have an experimental qemu command option -x-vz-nbd-restore (passed together with -incoming option) to fix it. *Links* [1] Previous version of RFC https://www.redhat.com/archives/libvir-list/2017-November/msg00514.html

5 51

[libvirt] [dbus PATCH 00/15] Some more get APIs for Domain Interface
by Katerina Koukiou 25 Apr '18

25 Apr '18

Katerina Koukiou (15): Implement GetTime method for Domain Interface Implement MigrateGetCompressionCache method for Domain Interface Implement GetBlockIoTune method for Domain Interface Implement GetBlockJobInfo method for Domain Interface Implement GetDiskErrors method for Domain Interface Impement GetFSInfo method for Domain Interface Implement GetGuestVcpus method for Domain interface Implement GetHostname method for Domain Interface Implement GetInterfaceParameters method for Domain Interface Implement GetIOThreadInfo method for Domain Interface Implement GetJobStats method for Domain Interface Implement GetMetadata method for Domain Interface Implement GetNumaParameters method for Domain Interface Implement GetPerfEvents method for Domain Interface Implement GetCPUStats method for Domain Interface data/org.libvirt.Domain.xml | 98 +++++++ src/domain.c | 665 ++++++++++++++++++++++++++++++++++++++++++++ tests/test_domain.py | 6 + 3 files changed, 769 insertions(+) -- 2.15.0

4 36

[libvirt] [PATCH v2] qemu: Add I/O thread support info into domain capabilities
by Martin Kletzander 25 Apr '18

25 Apr '18

Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- docs/schemas/domaincaps.rng | 10 ++++++++++ src/conf/domain_capabilities.c | 3 +++ src/conf/domain_capabilities.h | 1 + src/qemu/qemu_capabilities.c | 11 +++++++++++ tests/domaincapsschemadata/basic.xml | 1 + tests/domaincapsschemadata/full.xml | 1 + tests/domaincapsschemadata/qemu_1.7.0.x86_64.xml | 1 + .../domaincapsschemadata/qemu_2.12.0-virt.aarch64.xml | 1 + tests/domaincapsschemadata/qemu_2.12.0.ppc64.xml | 1 + tests/domaincapsschemadata/qemu_2.12.0.s390x.xml | 1 + tests/domaincapsschemadata/qemu_2.12.0.x86_64.xml | 1 + .../domaincapsschemadata/qemu_2.6.0-virt.aarch64.xml | 1 + tests/domaincapsschemadata/qemu_2.6.0.aarch64.xml | 1 + tests/domaincapsschemadata/qemu_2.6.0.ppc64.xml | 1 + tests/domaincapsschemadata/qemu_2.6.0.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.7.0.s390x.xml | 1 + tests/domaincapsschemadata/qemu_2.8.0-tcg.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.8.0.s390x.xml | 1 + tests/domaincapsschemadata/qemu_2.8.0.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.9.0-q35.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.9.0-tcg.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.9.0.x86_64.xml | 1 + 22 files changed, 43 insertions(+) diff --git a/docs/schemas/domaincaps.rng b/docs/schemas/domaincaps.rng index 39053181eb9a..049b2ae7b64f 100644 --- a/docs/schemas/domaincaps.rng +++ b/docs/schemas/domaincaps.rng @@ -28,6 +28,9 @@ <optional> <ref name='vcpu'/> </optional> + <optional> + <ref name='iothreads'/> + </optional> <optional> <ref name='os'/> </optional> @@ -53,6 +56,13 @@ </element> </define> + <define name='iothreads'> + <element name='iothreads'> + <ref name='supported'/> + <empty/> + </element> + </define> + <define name='loader'> <element name='loader'> <ref name='supported'/> diff --git a/src/conf/domain_capabilities.c b/src/conf/domain_capabilities.c index bebbaf44d00e..f18bea99d63f 100644 --- a/src/conf/domain_capabilities.c +++ b/src/conf/domain_capabilities.c @@ -562,6 +562,9 @@ virDomainCapsFormat(virDomainCapsPtr const caps) if (caps->maxvcpus) virBufferAsprintf(&buf, "<vcpu max='%d'/>\n", caps->maxvcpus); + virBufferAsprintf(&buf, "<iothreads supported='%s'/>\n", + caps->iothreads ? "yes" : "no"); + virDomainCapsOSFormat(&buf, &caps->os); virDomainCapsCPUFormat(&buf, &caps->cpu); diff --git a/src/conf/domain_capabilities.h b/src/conf/domain_capabilities.h index fa4c1e442f57..3b5ce214d636 100644 --- a/src/conf/domain_capabilities.h +++ b/src/conf/domain_capabilities.h @@ -147,6 +147,7 @@ struct _virDomainCaps { /* Some machine specific info */ int maxvcpus; + bool iothreads; /* Whether I/O threads are supported or not. */ virDomainCapsOS os; virDomainCapsCPU cpu; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 833c75514c25..00634abb1649 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -4632,6 +4632,16 @@ virQEMUCapsFillDomainCPUCaps(virCapsPtr caps, } +static int +virQEMUCapsFillDomainIOThreadCaps(virQEMUCapsPtr qemuCaps, + virDomainCapsPtr domCaps) +{ + domCaps->iothreads = virQEMUCapsGet(qemuCaps, QEMU_CAPS_OBJECT_IOTHREAD); + + return 0; +} + + static int virQEMUCapsFillDomainDeviceDiskCaps(virQEMUCapsPtr qemuCaps, const char *machine, @@ -4866,6 +4876,7 @@ virQEMUCapsFillDomainCaps(virCapsPtr caps, if (virQEMUCapsFillDomainOSCaps(os, firmwares, nfirmwares) < 0 || virQEMUCapsFillDomainCPUCaps(caps, qemuCaps, domCaps) < 0 || + virQEMUCapsFillDomainIOThreadCaps(qemuCaps, domCaps) < 0 || virQEMUCapsFillDomainDeviceDiskCaps(qemuCaps, domCaps->machine, disk) < 0 || virQEMUCapsFillDomainDeviceGraphicsCaps(qemuCaps, graphics) < 0 || diff --git a/tests/domaincapsschemadata/basic.xml b/tests/domaincapsschemadata/basic.xml index 6b788d9144c8..7f9582430a7a 100644 --- a/tests/domaincapsschemadata/basic.xml +++ b/tests/domaincapsschemadata/basic.xml @@ -3,6 +3,7 @@ <domain>uml</domain> <machine>my-machine-type</machine> <arch>x86_64</arch> + <iothreads supported='no'/> <os supported='no'/> <cpu> <mode name='host-passthrough' supported='no'/> diff --git a/tests/domaincapsschemadata/full.xml b/tests/domaincapsschemadata/full.xml index ab6ef9f2ef17..b97bc883262a 100644 --- a/tests/domaincapsschemadata/full.xml +++ b/tests/domaincapsschemadata/full.xml @@ -4,6 +4,7 @@ <machine>my-machine-type</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='no'/> <os supported='yes'> <loader supported='yes'> <value>/foo/bar</value> diff --git a/tests/domaincapsschemadata/qemu_1.7.0.x86_64.xml b/tests/domaincapsschemadata/qemu_1.7.0.x86_64.xml index 8d1ad865703e..d71d948477ef 100644 --- a/tests/domaincapsschemadata/qemu_1.7.0.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_1.7.0.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-1.7</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='no'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.12.0-virt.aarch64.xml b/tests/domaincapsschemadata/qemu_2.12.0-virt.aarch64.xml index 9cba942fbf8e..9feceeea74c6 100644 --- a/tests/domaincapsschemadata/qemu_2.12.0-virt.aarch64.xml +++ b/tests/domaincapsschemadata/qemu_2.12.0-virt.aarch64.xml @@ -4,6 +4,7 @@ <machine>virt-2.12</machine> <arch>aarch64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.12.0.ppc64.xml b/tests/domaincapsschemadata/qemu_2.12.0.ppc64.xml index 4029e9e386a9..62f2d4f78a6e 100644 --- a/tests/domaincapsschemadata/qemu_2.12.0.ppc64.xml +++ b/tests/domaincapsschemadata/qemu_2.12.0.ppc64.xml @@ -4,6 +4,7 @@ <machine>pseries-2.12</machine> <arch>ppc64</arch> <vcpu max='1024'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.12.0.s390x.xml b/tests/domaincapsschemadata/qemu_2.12.0.s390x.xml index 50680c1ef8d2..be505ee331a4 100644 --- a/tests/domaincapsschemadata/qemu_2.12.0.s390x.xml +++ b/tests/domaincapsschemadata/qemu_2.12.0.s390x.xml @@ -4,6 +4,7 @@ <machine>s390-ccw-virtio-2.12</machine> <arch>s390x</arch> <vcpu max='248'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.12.0.x86_64.xml b/tests/domaincapsschemadata/qemu_2.12.0.x86_64.xml index 851d914bc9c6..84a83551ad42 100644 --- a/tests/domaincapsschemadata/qemu_2.12.0.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.12.0.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-2.12</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.6.0-virt.aarch64.xml b/tests/domaincapsschemadata/qemu_2.6.0-virt.aarch64.xml index 7c019b230868..b3dc0dd8004b 100644 --- a/tests/domaincapsschemadata/qemu_2.6.0-virt.aarch64.xml +++ b/tests/domaincapsschemadata/qemu_2.6.0-virt.aarch64.xml @@ -4,6 +4,7 @@ <machine>virt-2.6</machine> <arch>aarch64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.6.0.aarch64.xml b/tests/domaincapsschemadata/qemu_2.6.0.aarch64.xml index 3b142806217b..13bb19198d38 100644 --- a/tests/domaincapsschemadata/qemu_2.6.0.aarch64.xml +++ b/tests/domaincapsschemadata/qemu_2.6.0.aarch64.xml @@ -4,6 +4,7 @@ <machine>integratorcp</machine> <arch>aarch64</arch> <vcpu max='1'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.6.0.ppc64.xml b/tests/domaincapsschemadata/qemu_2.6.0.ppc64.xml index 98c72d36de04..d9a243d9d573 100644 --- a/tests/domaincapsschemadata/qemu_2.6.0.ppc64.xml +++ b/tests/domaincapsschemadata/qemu_2.6.0.ppc64.xml @@ -4,6 +4,7 @@ <machine>pseries-2.6</machine> <arch>ppc64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.6.0.x86_64.xml b/tests/domaincapsschemadata/qemu_2.6.0.x86_64.xml index de81886237ee..7eabf6756b89 100644 --- a/tests/domaincapsschemadata/qemu_2.6.0.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.6.0.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-2.6</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.7.0.s390x.xml b/tests/domaincapsschemadata/qemu_2.7.0.s390x.xml index b93d00ece197..c2045263530f 100644 --- a/tests/domaincapsschemadata/qemu_2.7.0.s390x.xml +++ b/tests/domaincapsschemadata/qemu_2.7.0.s390x.xml @@ -4,6 +4,7 @@ <machine>s390-ccw-virtio-2.7</machine> <arch>s390x</arch> <vcpu max='248'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.8.0-tcg.x86_64.xml b/tests/domaincapsschemadata/qemu_2.8.0-tcg.x86_64.xml index d860cd833fed..93e0a610f6ce 100644 --- a/tests/domaincapsschemadata/qemu_2.8.0-tcg.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.8.0-tcg.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-2.8</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.8.0.s390x.xml b/tests/domaincapsschemadata/qemu_2.8.0.s390x.xml index ee40d1e84ec3..6555e99c68a3 100644 --- a/tests/domaincapsschemadata/qemu_2.8.0.s390x.xml +++ b/tests/domaincapsschemadata/qemu_2.8.0.s390x.xml @@ -4,6 +4,7 @@ <machine>s390-ccw-virtio-2.8</machine> <arch>s390x</arch> <vcpu max='248'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.8.0.x86_64.xml b/tests/domaincapsschemadata/qemu_2.8.0.x86_64.xml index 33161f7b8234..2a6edd9a0f80 100644 --- a/tests/domaincapsschemadata/qemu_2.8.0.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.8.0.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-2.8</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.9.0-q35.x86_64.xml b/tests/domaincapsschemadata/qemu_2.9.0-q35.x86_64.xml index 07e1db641a76..aef8a90f3930 100644 --- a/tests/domaincapsschemadata/qemu_2.9.0-q35.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.9.0-q35.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-q35-2.9</machine> <arch>x86_64</arch> <vcpu max='288'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.9.0-tcg.x86_64.xml b/tests/domaincapsschemadata/qemu_2.9.0-tcg.x86_64.xml index 6c2bbac190c7..e4afdeedc4e6 100644 --- a/tests/domaincapsschemadata/qemu_2.9.0-tcg.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.9.0-tcg.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-2.9</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> diff --git a/tests/domaincapsschemadata/qemu_2.9.0.x86_64.xml b/tests/domaincapsschemadata/qemu_2.9.0.x86_64.xml index 2fc3b721389d..8f0f4fb7369b 100644 --- a/tests/domaincapsschemadata/qemu_2.9.0.x86_64.xml +++ b/tests/domaincapsschemadata/qemu_2.9.0.x86_64.xml @@ -4,6 +4,7 @@ <machine>pc-i440fx-2.9</machine> <arch>x86_64</arch> <vcpu max='255'/> + <iothreads supported='yes'/> <os supported='yes'> <loader supported='yes'> <value>/usr/share/AAVMF/AAVMF_CODE.fd</value> -- 2.17.0

2 1

[libvirt] [PATCH v2 00/11] Add support for VM Generation ID (vmgenid)
by John Ferlan 25 Apr '18

25 Apr '18

v1: https://www.redhat.com/archives/libvir-list/2018-April/msg00913.html Changes since v1: - Remove the qemuProcessCheckGenID and clean up from the fallout of that - Alter the *.args based on all the recent caps default change adjustments John Ferlan (11): Check return status for virUUIDGenerate conf: Modify last arg to virDomainDefCopy qemu: Add flags to qemuDomainMigratableDefCheckABIStability conf: Add VM Generation ID to virDomainDef conf: Add flag to regenerate genid for virDomainDefCopy conf: Add VM Generation ID parse/format support qemu: Add VM Generation ID device capability qemu: Handle genid processing during startup/launch Remove check for duplicitous GenID in another VM qemu: Add VM Generation ID to qemu command line docs: Add news article for VM Generation ID docs/formatdomain.html.in | 29 ++++++++ docs/news.xml | 12 ++++ docs/schemas/domaincommon.rng | 8 +++ src/conf/domain_conf.c | 81 +++++++++++++++++++++-- src/conf/domain_conf.h | 19 +++++- src/conf/network_conf.c | 2 +- src/conf/secret_conf.c | 2 +- src/libxl/libxl_domain.c | 4 +- src/openvz/openvz_conf.c | 2 +- src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 31 +++++++++ src/qemu/qemu_domain.c | 23 ++++--- src/qemu/qemu_domain.h | 6 +- src/qemu/qemu_driver.c | 31 ++++++--- src/qemu/qemu_migration.c | 4 +- src/qemu/qemu_process.c | 46 ++++++++++++- src/qemu/qemu_process.h | 1 + src/test/test_driver.c | 6 +- src/xenconfig/xen_common.c | 2 +- tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 + tests/qemuxml2argvdata/genid-auto.args | 24 +++++++ tests/qemuxml2argvdata/genid-auto.xml | 32 +++++++++ tests/qemuxml2argvdata/genid.args | 24 +++++++ tests/qemuxml2argvdata/genid.xml | 32 +++++++++ tests/qemuxml2argvtest.c | 4 ++ tests/qemuxml2xmloutdata/genid-active.xml | 32 +++++++++ tests/qemuxml2xmloutdata/genid-auto-active.xml | 32 +++++++++ tests/qemuxml2xmloutdata/genid-auto-inactive.xml | 32 +++++++++ tests/qemuxml2xmloutdata/genid-inactive.xml | 32 +++++++++ tests/qemuxml2xmltest.c | 5 +- 33 files changed, 527 insertions(+), 37 deletions(-) create mode 100644 tests/qemuxml2argvdata/genid-auto.args create mode 100644 tests/qemuxml2argvdata/genid-auto.xml create mode 100644 tests/qemuxml2argvdata/genid.args create mode 100644 tests/qemuxml2argvdata/genid.xml create mode 100644 tests/qemuxml2xmloutdata/genid-active.xml create mode 100644 tests/qemuxml2xmloutdata/genid-auto-active.xml create mode 100644 tests/qemuxml2xmloutdata/genid-auto-inactive.xml create mode 100644 tests/qemuxml2xmloutdata/genid-inactive.xml -- 2.13.6

3 33

[libvirt] [PATCH 00/29] syntax: Require spaces after casts
by Martin Kletzander 25 Apr '18

25 Apr '18

6 38

[libvirt] Plans for next release
by Daniel Veillard 25 Apr '18

25 Apr '18

Though May 1st is usually closed for most countries, let's try to shoot for a next release around that time. Best might be to enter freeze tomorrow morning (my time), allowing for 2 days of reviews, then an RC2 over the week-end and if there is nothing serious shoot for a release around Tues. I hope this works well for everybody, thanks, Daniel -- Daniel Veillard | Red Hat Developers Tools http://developer.redhat.com/ veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[libvirt] [PATCH] po: don't install gmo files when --disable-nls is given
by Daniel P. Berrangé 25 Apr '18

25 Apr '18

With --disable-nls is given we turn off use of gettext in the source code, but mistakenly still installed the gmo files. Reported-by: Olaf Hering <olaf(a)aepfle.de> Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- m4/virt-nls.m4 | 1 + po/Makefile.am | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/m4/virt-nls.m4 b/m4/virt-nls.m4 index f9fb27ceb5..be3c53fe4d 100644 --- a/m4/virt-nls.m4 +++ b/m4/virt-nls.m4 @@ -61,6 +61,7 @@ AC_DEFUN([LIBVIRT_CHECK_NLS],[ msgfmt_is_gnu=no fi AC_MSG_RESULT([$msgfmt_is_gnu]) + AM_CONDITIONAL([ENABLE_NLS], [test "x$enable_nls" = "xyes"]) AM_CONDITIONAL([HAVE_GNU_GETTEXT_TOOLS], [test "x$XGETTEXT" != "xno" && test "x$MSGFMT" != "xno" && \ test "x$MSGMERGE" != "xno" && test "x$msgfmt_is_gnu" != "xno"]) diff --git a/po/Makefile.am b/po/Makefile.am index 812c6324ac..da117edbd5 100644 --- a/po/Makefile.am +++ b/po/Makefile.am @@ -89,6 +89,8 @@ $(srcdir)/%.gmo: $(srcdir)/%.po endif HAVE_GNU_GETTEXT_TOOLS +if ENABLE_NLS + # Cannot use 'localedir' since this conflicts with autoconf. langinstdir = $(datadir)/locale @@ -105,3 +107,5 @@ uninstall-hook: d=$(DESTDIR)$(langinstdir)/$$lang/LC_MESSAGES; \ rm -f $$d/$(DOMAIN).mo; \ done + +endif ENABLE_NLS -- 2.14.3

1 0

[libvirt] GSoC student introduction
by Prafullkumar Tale 25 Apr '18

25 Apr '18

Hello, I'm Prafullkumar, a student participant from Google Summer of Code program. I'll be working to convert OCI-formatted containers to libvirt lxc containers[1] over the summer. I'm excited to be working with libvirt community and hope to make valuable contribution. I hangout on IRC with the handle *talep158.* I'm available in IST working hours. [1] https://wiki.libvirt.org/page/Google_Summer_of_Code_Ideas Regards -- Prafullkumar

1 0

[libvirt] [PATCH] qemu: use target.port for isa-serial
by Thilo Cestonaro 25 Apr '18

25 Apr '18

A configured target.port is currently totaly ignored, while constructing qemu commandline, for all types of serial devices. This patch adds a -device parameter "index" for the target model isa-serial. This enables the user to specify which serial device will end in which ttySX device. Updated test results which failed because of this change. Added two tests serial-dev-without-target-port, serial-dev-with-target-port which test generating qemu command with multiple serial devices and different ports. Signed-off-by: Thilo Cestonaro <thilo.cestonaro(a)ts.fujitsu.com> --- v2: added tests which create qemu commandline with and without specified target ports. Updated existing tests to pass again. src/qemu/qemu_command.c | 16 ++++++++ tests/qemuxml2argvdata/bios.args | 2 +- .../qemuxml2argvdata/console-compat-auto.args | 2 +- .../console-compat-chardev.args | 2 +- tests/qemuxml2argvdata/console-compat.args | 2 +- .../qemuxml2argvdata/console-virtio-many.args | 2 +- tests/qemuxml2argvdata/controller-order.args | 2 +- .../q35-virt-manager-basic.args | 2 +- .../serial-dev-chardev-iobase.args | 2 +- .../qemuxml2argvdata/serial-dev-chardev.args | 2 +- tests/qemuxml2argvdata/serial-dev-chardev.xml | 4 +- .../serial-dev-with-target-port.args | 31 +++++++++++++++ .../serial-dev-with-target-port.xml | 38 +++++++++++++++++++ .../serial-dev-without-target-port.args | 31 +++++++++++++++ .../serial-dev-without-target-port.xml | 35 +++++++++++++++++ .../qemuxml2argvdata/serial-file-chardev.args | 2 +- tests/qemuxml2argvdata/serial-file-log.args | 2 +- .../qemuxml2argvdata/serial-many-chardev.args | 4 +- .../qemuxml2argvdata/serial-pty-chardev.args | 2 +- tests/qemuxml2argvdata/serial-spiceport.args | 2 +- .../qemuxml2argvdata/serial-tcp-chardev.args | 2 +- .../serial-tcp-telnet-chardev.args | 2 +- .../serial-tcp-tlsx509-chardev-notls.args | 4 +- .../serial-tcp-tlsx509-chardev-verify.args | 4 +- .../serial-tcp-tlsx509-chardev.args | 4 +- .../serial-tcp-tlsx509-secret-chardev.args | 4 +- .../qemuxml2argvdata/serial-udp-chardev.args | 4 +- .../qemuxml2argvdata/serial-unix-chardev.args | 2 +- tests/qemuxml2argvdata/serial-vc-chardev.args | 2 +- tests/qemuxml2argvdata/user-aliases.args | 4 +- tests/qemuxml2argvtest.c | 8 +++- 31 files changed, 191 insertions(+), 34 deletions(-) create mode 100644 tests/qemuxml2argvdata/serial-dev-with-target-port.args create mode 100644 tests/qemuxml2argvdata/serial-dev-with-target-port.xml create mode 100644 tests/qemuxml2argvdata/serial-dev-without-target-port.args create mode 100644 tests/qemuxml2argvdata/serial-dev-without-target-port.xml diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 514c3ab2e..5f770404b 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -10291,6 +10291,22 @@ qemuBuildSerialChrDeviceStr(char **deviceStr, virDomainChrSerialTargetModelTypeToString(serial->targetModel), serial->info.alias, serial->info.alias); + switch ((virDomainChrSerialTargetModel) serial->targetModel) { + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_ISA_SERIAL: + if (serial->target.port != -1) + virBufferAsprintf(&cmd, ",index=%d", serial->target.port); + break; + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_NONE: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_USB_SERIAL: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_PCI_SERIAL: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_SPAPR_VTY: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_PL011: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_SCLPCONSOLE: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_SCLPLMCONSOLE: + case VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_LAST: + break; + } + if (qemuBuildDeviceAddressStr(&cmd, def, &serial->info, qemuCaps) < 0) goto error; diff --git a/tests/qemuxml2argvdata/bios.args b/tests/qemuxml2argvdata/bios.args index 048d4ff96..81e4a8ba7 100644 --- a/tests/qemuxml2argvdata/bios.args +++ b/tests/qemuxml2argvdata/bios.args @@ -24,6 +24,6 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device usb-tablet,id=input0,bus=usb.0,port=1 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/console-compat-auto.args b/tests/qemuxml2argvdata/console-compat-auto.args index cab47dbb5..3b048c721 100644 --- a/tests/qemuxml2argvdata/console-compat-auto.args +++ b/tests/qemuxml2argvdata/console-compat-auto.args @@ -22,5 +22,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/console-compat-chardev.args b/tests/qemuxml2argvdata/console-compat-chardev.args index ff7678ebc..61f5712bd 100644 --- a/tests/qemuxml2argvdata/console-compat-chardev.args +++ b/tests/qemuxml2argvdata/console-compat-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/console-compat.args b/tests/qemuxml2argvdata/console-compat.args index fb96946f1..674c92696 100644 --- a/tests/qemuxml2argvdata/console-compat.args +++ b/tests/qemuxml2argvdata/console-compat.args @@ -22,4 +22,4 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 +-device isa-serial,chardev=charserial0,id=serial0,index=0 diff --git a/tests/qemuxml2argvdata/console-virtio-many.args b/tests/qemuxml2argvdata/console-virtio-many.args index 58a8a1fa0..f050cbb25 100644 --- a/tests/qemuxml2argvdata/console-virtio-many.args +++ b/tests/qemuxml2argvdata/console-virtio-many.args @@ -24,7 +24,7 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev pty,id=charconsole1 \ -device virtconsole,chardev=charconsole1,id=console1 \ -chardev pty,id=charconsole2 \ diff --git a/tests/qemuxml2argvdata/controller-order.args b/tests/qemuxml2argvdata/controller-order.args index 70a8ba9ce..0e8c10f6d 100644 --- a/tests/qemuxml2argvdata/controller-order.args +++ b/tests/qemuxml2argvdata/controller-order.args @@ -33,7 +33,7 @@ id=drive-ide0-1-0,media=cdrom,readonly=on \ -chardev spicevmc,id=charsmartcard0,name=smartcard \ -device ccid-card-passthru,chardev=charsmartcard0,id=smartcard0,bus=ccid0.0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev spicevmc,id=charchannel0,name=vdagent \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,\ id=channel0,name=com.redhat.spice.0 \ diff --git a/tests/qemuxml2argvdata/q35-virt-manager-basic.args b/tests/qemuxml2argvdata/q35-virt-manager-basic.args index c7dd514fe..83e6dde5f 100644 --- a/tests/qemuxml2argvdata/q35-virt-manager-basic.args +++ b/tests/qemuxml2argvdata/q35-virt-manager-basic.args @@ -38,7 +38,7 @@ id=virtio-disk0 \ -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:9a:e6:c6,bus=pci.1,\ addr=0x0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev socket,id=charchannel0,\ path=/tmp/channel/domain--1-virt-manager-basic/org.qemu.guest_agent.0,server,\ nowait \ diff --git a/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args b/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args index 3a52b9efc..c19b05a18 100644 --- a/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args +++ b/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev tty,id=charserial0,path=/dev/ttyS2 \ --device isa-serial,chardev=charserial0,id=serial0,iobase=0x3f8,irq=0x4 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0,iobase=0x3f8,irq=0x4 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-dev-chardev.args b/tests/qemuxml2argvdata/serial-dev-chardev.args index 55b939551..f78f51ab2 100644 --- a/tests/qemuxml2argvdata/serial-dev-chardev.args +++ b/tests/qemuxml2argvdata/serial-dev-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev tty,id=charserial0,path=/dev/ttyS2 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=1 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-dev-chardev.xml b/tests/qemuxml2argvdata/serial-dev-chardev.xml index dffd27d06..329a0fc19 100644 --- a/tests/qemuxml2argvdata/serial-dev-chardev.xml +++ b/tests/qemuxml2argvdata/serial-dev-chardev.xml @@ -23,11 +23,11 @@ <controller type='ide' index='0'/> <serial type='dev'> <source path='/dev/ttyS2'/> - <target port='0'/> + <target port='1'/> </serial> <console type='dev'> <source path='/dev/ttyS2'/> - <target port='0'/> + <target port='1'/> </console> <memballoon model='virtio'/> </devices> diff --git a/tests/qemuxml2argvdata/serial-dev-with-target-port.args b/tests/qemuxml2argvdata/serial-dev-with-target-port.args new file mode 100644 index 000000000..c8626bf4f --- /dev/null +++ b/tests/qemuxml2argvdata/serial-dev-with-target-port.args @@ -0,0 +1,31 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-i686 \ +-name QEMUGuest1 \ +-S \ +-M pc \ +-m 214 \ +-smp 1,sockets=1,cores=1,threads=1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-nographic \ +-nodefconfig \ +-nodefaults \ +-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,\ +server,nowait \ +-mon chardev=charmonitor,id=monitor,mode=readline \ +-no-acpi \ +-boot c \ +-usb \ +-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-chardev tty,id=charserial0,path=/dev/ttyS2 \ +-device isa-serial,chardev=charserial0,id=serial0,index=1 \ +-chardev tty,id=charserial1,path=/dev/ttyS1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=2 \ +-chardev tty,id=charserial2,path=/dev/ttyS3 \ +-device isa-serial,chardev=charserial2,id=serial2,index=3 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \ No newline at end of file diff --git a/tests/qemuxml2argvdata/serial-dev-with-target-port.xml b/tests/qemuxml2argvdata/serial-dev-with-target-port.xml new file mode 100644 index 000000000..593ee5162 --- /dev/null +++ b/tests/qemuxml2argvdata/serial-dev-with-target-port.xml @@ -0,0 +1,38 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu-system-i686</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <serial type='dev'> + <source path='/dev/ttyS2'/> + <target port='1'/> + </serial> + <serial type='dev'> + <source path='/dev/ttyS1'/> + <target port='2'/> + </serial> + <serial type='dev'> + <source path='/dev/ttyS3'/> + <target port='3'/> + </serial> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/serial-dev-without-target-port.args b/tests/qemuxml2argvdata/serial-dev-without-target-port.args new file mode 100644 index 000000000..8e46260c7 --- /dev/null +++ b/tests/qemuxml2argvdata/serial-dev-without-target-port.args @@ -0,0 +1,31 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-i686 \ +-name QEMUGuest1 \ +-S \ +-M pc \ +-m 214 \ +-smp 1,sockets=1,cores=1,threads=1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-nographic \ +-nodefconfig \ +-nodefaults \ +-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,\ +server,nowait \ +-mon chardev=charmonitor,id=monitor,mode=readline \ +-no-acpi \ +-boot c \ +-usb \ +-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-chardev tty,id=charserial0,path=/dev/ttyS2 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ +-chardev tty,id=charserial1,path=/dev/ttyS1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=1 \ +-chardev tty,id=charserial2,path=/dev/ttyS3 \ +-device isa-serial,chardev=charserial2,id=serial2,index=2 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \ No newline at end of file diff --git a/tests/qemuxml2argvdata/serial-dev-without-target-port.xml b/tests/qemuxml2argvdata/serial-dev-without-target-port.xml new file mode 100644 index 000000000..c170a111a --- /dev/null +++ b/tests/qemuxml2argvdata/serial-dev-without-target-port.xml @@ -0,0 +1,35 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu-system-i686</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <serial type='dev'> + <source path='/dev/ttyS2'/> + </serial> + <serial type='dev'> + <source path='/dev/ttyS1'/> + </serial> + <serial type='dev'> + <source path='/dev/ttyS3'/> + </serial> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/serial-file-chardev.args b/tests/qemuxml2argvdata/serial-file-chardev.args index 47eb0aa9b..144ef37be 100644 --- a/tests/qemuxml2argvdata/serial-file-chardev.args +++ b/tests/qemuxml2argvdata/serial-file-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev file,id=charserial0,path=/tmp/serial.log,append=on \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-file-log.args b/tests/qemuxml2argvdata/serial-file-log.args index 86f8e73e0..43a2d655b 100644 --- a/tests/qemuxml2argvdata/serial-file-log.args +++ b/tests/qemuxml2argvdata/serial-file-log.args @@ -23,4 +23,4 @@ server,nowait \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev file,id=charserial0,path=/tmp/serial.log,\ logfile=/var/lib/libvirt/qemu/demo-serial.log,logappend=off \ --device isa-serial,chardev=charserial0,id=serial0 +-device isa-serial,chardev=charserial0,id=serial0,index=0 diff --git a/tests/qemuxml2argvdata/serial-many-chardev.args b/tests/qemuxml2argvdata/serial-many-chardev.args index eed3d418c..e07d1e9b0 100644 --- a/tests/qemuxml2argvdata/serial-many-chardev.args +++ b/tests/qemuxml2argvdata/serial-many-chardev.args @@ -23,7 +23,7 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev file,id=charserial1,path=/tmp/serial.log \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=1 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-pty-chardev.args b/tests/qemuxml2argvdata/serial-pty-chardev.args index ff7678ebc..61f5712bd 100644 --- a/tests/qemuxml2argvdata/serial-pty-chardev.args +++ b/tests/qemuxml2argvdata/serial-pty-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-spiceport.args b/tests/qemuxml2argvdata/serial-spiceport.args index a3981499a..9bfa0450c 100644 --- a/tests/qemuxml2argvdata/serial-spiceport.args +++ b/tests/qemuxml2argvdata/serial-spiceport.args @@ -22,7 +22,7 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev spiceport,id=charserial0,name=org.qemu.console.serial.0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device usb-tablet,id=input0,bus=usb.0,port=1 \ -spice port=5903,tls-port=5904,addr=127.0.0.1,x509-dir=/etc/pki/libvirt-spice \ -device qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,bus=pci.0,\ diff --git a/tests/qemuxml2argvdata/serial-tcp-chardev.args b/tests/qemuxml2argvdata/serial-tcp-chardev.args index 4c427e22c..79476c772 100644 --- a/tests/qemuxml2argvdata/serial-tcp-chardev.args +++ b/tests/qemuxml2argvdata/serial-tcp-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev socket,id=charserial0,host=127.0.0.1,port=9999 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args b/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args index 3ed08e95f..a0a4877a2 100644 --- a/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args +++ b/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev socket,id=charserial0,host=127.0.0.1,port=9999,telnet,server,nowait \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args index bd0feb319..1b92bf4a9 100644 --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args @@ -24,7 +24,7 @@ server,nowait \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,\ localport=1111 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev socket,id=charserial1,host=127.0.0.1,port=5555 \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args index ab5f7e27f..0b6363698 100644 --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args @@ -24,10 +24,10 @@ server,nowait \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,\ localport=1111 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -object tls-creds-x509,id=objcharserial1_tls0,dir=/etc/pki/libvirt-chardev,\ endpoint=client,verify-peer=yes \ -chardev socket,id=charserial1,host=127.0.0.1,port=5555,\ tls-creds=objcharserial1_tls0 \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args index ab5f7e27f..0b6363698 100644 --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args @@ -24,10 +24,10 @@ server,nowait \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,\ localport=1111 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -object tls-creds-x509,id=objcharserial1_tls0,dir=/etc/pki/libvirt-chardev,\ endpoint=client,verify-peer=yes \ -chardev socket,id=charserial1,host=127.0.0.1,port=5555,\ tls-creds=objcharserial1_tls0 \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args b/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args index 2567abbfa..58b7eca83 100644 --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args @@ -26,7 +26,7 @@ server,nowait \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,\ localport=1111 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -object secret,id=charserial1-secret0,\ data=9eao5F8qtkGt+seB1HYivWIxbtwUu6MQtg1zpj/oDtUsPr1q8wBYM91uEHCn6j/1,\ keyid=masterKey0,iv=AAECAwQFBgcICQoLDA0ODw==,format=base64 \ @@ -34,5 +34,5 @@ keyid=masterKey0,iv=AAECAwQFBgcICQoLDA0ODw==,format=base64 \ endpoint=client,verify-peer=yes,passwordid=charserial1-secret0 \ -chardev socket,id=charserial1,host=127.0.0.1,port=5555,\ tls-creds=objcharserial1_tls0 \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-udp-chardev.args b/tests/qemuxml2argvdata/serial-udp-chardev.args index c9db110e0..a671c5ed4 100644 --- a/tests/qemuxml2argvdata/serial-udp-chardev.args +++ b/tests/qemuxml2argvdata/serial-udp-chardev.args @@ -24,7 +24,7 @@ server,nowait \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev udp,id=charserial0,host=127.0.0.1,port=9998,localaddr=127.0.0.1,\ localport=9999 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev udp,id=charserial1,host=,port=9999,localaddr=,localport=0 \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=1 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-unix-chardev.args b/tests/qemuxml2argvdata/serial-unix-chardev.args index df75e15fe..6b09e27ec 100644 --- a/tests/qemuxml2argvdata/serial-unix-chardev.args +++ b/tests/qemuxml2argvdata/serial-unix-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev socket,id=charserial0,path=/tmp/serial.sock \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/serial-vc-chardev.args b/tests/qemuxml2argvdata/serial-vc-chardev.args index 3438c8447..af4cac559 100644 --- a/tests/qemuxml2argvdata/serial-vc-chardev.args +++ b/tests/qemuxml2argvdata/serial-vc-chardev.args @@ -23,5 +23,5 @@ server,nowait \ -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ -chardev vc,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/user-aliases.args b/tests/qemuxml2argvdata/user-aliases.args index ad9394710..5fa328828 100644 --- a/tests/qemuxml2argvdata/user-aliases.args +++ b/tests/qemuxml2argvdata/user-aliases.args @@ -59,9 +59,9 @@ addr=0xa \ -net socket,connect=127.0.0.1:1234,vlan=2,name=hostua-AndAlsoClientMode \ -device ccid-card-emulated,backend=nss-emulated,id=smartcard0,bus=ua-myCCID.0 \ -chardev pty,id=charserial0 \ --device isa-serial,chardev=charserial0,id=serial0 \ +-device isa-serial,chardev=charserial0,id=serial0,index=0 \ -chardev pty,id=charserial1 \ --device isa-serial,chardev=charserial1,id=serial1 \ +-device isa-serial,chardev=charserial1,id=serial1,index=1 \ -chardev socket,id=charchannel0,\ path=/var/lib/libvirt/qemu/channel/target/gentoo.org.qemu.guest_agent.0,server,\ nowait \ diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 165137e93..ca63886a6 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -1306,6 +1306,12 @@ mymain(void) DO_TEST("serial-dev-chardev-iobase", QEMU_CAPS_DEVICE_ISA_SERIAL, QEMU_CAPS_NODEFCONFIG); + DO_TEST("serial-dev-with-target-port", + QEMU_CAPS_DEVICE_ISA_SERIAL, + QEMU_CAPS_NODEFCONFIG); + DO_TEST("serial-dev-without-target-port", + QEMU_CAPS_DEVICE_ISA_SERIAL, + QEMU_CAPS_NODEFCONFIG); DO_TEST("serial-file-chardev", QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_ISA_SERIAL, @@ -1318,7 +1324,7 @@ mymain(void) QEMU_CAPS_NODEFCONFIG); DO_TEST("serial-udp-chardev", QEMU_CAPS_DEVICE_ISA_SERIAL, - QEMU_CAPS_NODEFCONFIG); + QEMU_CAPS_NODEFCONFIG); DO_TEST("serial-tcp-telnet-chardev", QEMU_CAPS_DEVICE_ISA_SERIAL, QEMU_CAPS_NODEFCONFIG); -- 2.17.0

2 1

[libvirt] [PATCH] remote: disable unused function on win32 platform build
by Daniel P. Berrangé 24 Apr '18

24 Apr '18

Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- Pushed as trivial build fix src/remote/remote_driver.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index 3973b37d5f..95437b4365 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -712,6 +712,7 @@ remoteConnectSupportsFeatureUnlocked(virConnectPtr conn, } +#ifndef WIN32 static char *remoteGetUNIXSocketNonRoot(void) { char *sockname = NULL; @@ -729,6 +730,7 @@ static char *remoteGetUNIXSocketNonRoot(void) VIR_DEBUG("Chosen UNIX sockname %s", sockname); return sockname; } +#endif /* WIN32 */ static char *remoteGetUNIXSocketRoot(unsigned int flags) { -- 2.14.3

1 0